Blame view
drivers/scsi/scsi_transport_sas.c
50.6 KB
c7ebbbce3 [SCSI] SAS transp... |
1 |
/* |
a01256413 [SCSI] sas: add s... |
2 |
* Copyright (C) 2005-2006 Dell Inc. |
c7ebbbce3 [SCSI] SAS transp... |
3 4 5 6 7 8 |
* Released under GPL v2. * * Serial Attached SCSI (SAS) transport class. * * The SAS transport class contains common code to deal with SAS HBAs, * an aproximated representation of SAS topologies in the driver model, |
b1c118121 drivers/scsi/: Sp... |
9 |
* and various sysfs attributes to expose these topologies and management |
c7ebbbce3 [SCSI] SAS transp... |
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 |
* interfaces to userspace. * * In addition to the basic SCSI core objects this transport class * introduces two additional intermediate objects: The SAS PHY * as represented by struct sas_phy defines an "outgoing" PHY on * a SAS HBA or Expander, and the SAS remote PHY represented by * struct sas_rphy defines an "incoming" PHY on a SAS Expander or * end device. Note that this is purely a software concept, the * underlying hardware for a PHY and a remote PHY is the exactly * the same. * * There is no concept of a SAS port in this code, users can see * what PHYs form a wide port based on the port_identifier attribute, * which is the same for all PHYs in a port. */ #include <linux/init.h> #include <linux/module.h> |
f6a570333 [PATCH] severing ... |
28 |
#include <linux/jiffies.h> |
c7ebbbce3 [SCSI] SAS transp... |
29 |
#include <linux/err.h> |
8c65b4a60 [PATCH] fix remai... |
30 31 |
#include <linux/slab.h> #include <linux/string.h> |
7aa68e80b [SCSI] transport_... |
32 33 |
#include <linux/blkdev.h> #include <linux/bsg.h> |
c7ebbbce3 [SCSI] SAS transp... |
34 |
|
e02f3f592 [SCSI] remove tar... |
35 |
#include <scsi/scsi.h> |
c7ebbbce3 [SCSI] SAS transp... |
36 37 38 39 |
#include <scsi/scsi_device.h> #include <scsi/scsi_host.h> #include <scsi/scsi_transport.h> #include <scsi/scsi_transport_sas.h> |
d6159c17c [SCSI] expose sas... |
40 |
#include "scsi_sas_internal.h" |
c7ebbbce3 [SCSI] SAS transp... |
41 42 |
struct sas_host_attrs { struct list_head rphy_list; |
e02f3f592 [SCSI] remove tar... |
43 |
struct mutex lock; |
b6aff6695 [SCSI] scsi_trans... |
44 |
struct request_queue *q; |
c7ebbbce3 [SCSI] SAS transp... |
45 |
u32 next_target_id; |
79cb1819e [SCSI] add prelim... |
46 |
u32 next_expander_id; |
c9fefeb26 [SCSI] scsi_trans... |
47 |
int next_port_id; |
c7ebbbce3 [SCSI] SAS transp... |
48 49 50 51 52 53 54 |
}; #define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data) /* * Hack to allow attributes of the same name in different objects. */ |
ee959b00c SCSI: convert str... |
55 56 |
#define SAS_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \ struct device_attribute dev_attr_##_prefix##_##_name = \ |
c7ebbbce3 [SCSI] SAS transp... |
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 |
__ATTR(_name,_mode,_show,_store) /* * Pretty printing helpers */ #define sas_bitfield_name_match(title, table) \ static ssize_t \ get_sas_##title##_names(u32 table_key, char *buf) \ { \ char *prefix = ""; \ ssize_t len = 0; \ int i; \ \ |
6391a1137 [SCSI] drivers/sc... |
72 |
for (i = 0; i < ARRAY_SIZE(table); i++) { \ |
c7ebbbce3 [SCSI] SAS transp... |
73 74 75 76 77 78 79 80 81 82 |
if (table[i].value & table_key) { \ len += sprintf(buf + len, "%s%s", \ prefix, table[i].name); \ prefix = ", "; \ } \ } \ len += sprintf(buf + len, " "); \ return len; \ } |
d24e1eeb3 [SCSI] scsi_trans... |
83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 |
#define sas_bitfield_name_set(title, table) \ static ssize_t \ set_sas_##title##_names(u32 *table_key, const char *buf) \ { \ ssize_t len = 0; \ int i; \ \ for (i = 0; i < ARRAY_SIZE(table); i++) { \ len = strlen(table[i].name); \ if (strncmp(buf, table[i].name, len) == 0 && \ (buf[len] == ' ' || buf[len] == '\0')) { \ *table_key = table[i].value; \ return 0; \ } \ } \ return -EINVAL; \ } |
c7ebbbce3 [SCSI] SAS transp... |
101 102 103 104 105 106 107 |
#define sas_bitfield_name_search(title, table) \ static ssize_t \ get_sas_##title##_names(u32 table_key, char *buf) \ { \ ssize_t len = 0; \ int i; \ \ |
6391a1137 [SCSI] drivers/sc... |
108 |
for (i = 0; i < ARRAY_SIZE(table); i++) { \ |
c7ebbbce3 [SCSI] SAS transp... |
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 |
if (table[i].value == table_key) { \ len += sprintf(buf + len, "%s", \ table[i].name); \ break; \ } \ } \ len += sprintf(buf + len, " "); \ return len; \ } static struct { u32 value; char *name; } sas_device_type_names[] = { { SAS_PHY_UNUSED, "unused" }, { SAS_END_DEVICE, "end device" }, { SAS_EDGE_EXPANDER_DEVICE, "edge expander" }, { SAS_FANOUT_EXPANDER_DEVICE, "fanout expander" }, }; sas_bitfield_name_search(device_type, sas_device_type_names) static struct { u32 value; char *name; } sas_protocol_names[] = { { SAS_PROTOCOL_SATA, "sata" }, { SAS_PROTOCOL_SMP, "smp" }, { SAS_PROTOCOL_STP, "stp" }, { SAS_PROTOCOL_SSP, "ssp" }, }; sas_bitfield_name_match(protocol, sas_protocol_names) static struct { u32 value; char *name; } sas_linkspeed_names[] = { { SAS_LINK_RATE_UNKNOWN, "Unknown" }, { SAS_PHY_DISABLED, "Phy disabled" }, { SAS_LINK_RATE_FAILED, "Link Rate failed" }, { SAS_SATA_SPINUP_HOLD, "Spin-up hold" }, { SAS_LINK_RATE_1_5_GBPS, "1.5 Gbit" }, { SAS_LINK_RATE_3_0_GBPS, "3.0 Gbit" }, |
7e6dff62d [SCSI] add 6.0 Gb... |
153 |
{ SAS_LINK_RATE_6_0_GBPS, "6.0 Gbit" }, |
c7ebbbce3 [SCSI] SAS transp... |
154 155 |
}; sas_bitfield_name_search(linkspeed, sas_linkspeed_names) |
d24e1eeb3 [SCSI] scsi_trans... |
156 |
sas_bitfield_name_set(linkspeed, sas_linkspeed_names) |
c7ebbbce3 [SCSI] SAS transp... |
157 |
|
0f88009d5 [SCSI] scsi_trans... |
158 159 160 161 162 163 164 165 166 167 |
static struct sas_end_device *sas_sdev_to_rdev(struct scsi_device *sdev) { struct sas_rphy *rphy = target_to_rphy(sdev->sdev_target); struct sas_end_device *rdev; BUG_ON(rphy->identify.device_type != SAS_END_DEVICE); rdev = rphy_to_end_device(rphy); return rdev; } |
7aa68e80b [SCSI] transport_... |
168 169 170 171 172 173 174 175 |
static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost, struct sas_rphy *rphy) { struct request *req; int ret; int (*handler)(struct Scsi_Host *, struct sas_rphy *, struct request *); while (!blk_queue_plugged(q)) { |
9934c8c04 block: implement ... |
176 |
req = blk_fetch_request(q); |
7aa68e80b [SCSI] transport_... |
177 178 |
if (!req) break; |
7aa68e80b [SCSI] transport_... |
179 180 181 182 |
spin_unlock_irq(q->queue_lock); handler = to_sas_internal(shost->transportt)->f->smp_handler; ret = handler(shost, rphy, req); |
2d507a01d [SCSI] libsas, bs... |
183 |
req->errors = ret; |
7aa68e80b [SCSI] transport_... |
184 |
|
93bdcba5a scsi_transport_sa... |
185 |
blk_end_request_all(req, ret); |
7aa68e80b [SCSI] transport_... |
186 |
|
93bdcba5a scsi_transport_sa... |
187 |
spin_lock_irq(q->queue_lock); |
7aa68e80b [SCSI] transport_... |
188 189 190 191 192 193 194 195 196 197 198 199 200 |
} } static void sas_host_smp_request(struct request_queue *q) { sas_smp_request(q, (struct Scsi_Host *)q->queuedata, NULL); } static void sas_non_host_smp_request(struct request_queue *q) { struct sas_rphy *rphy = q->queuedata; sas_smp_request(q, rphy_to_shost(rphy), rphy); } |
93c20a59a [SCSI] scsi_trans... |
201 202 203 204 205 206 207 208 209 |
static void sas_host_release(struct device *dev) { struct Scsi_Host *shost = dev_to_shost(dev); struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); struct request_queue *q = sas_host->q; if (q) blk_cleanup_queue(q); } |
39dca558a [SCSI] bsg: make ... |
210 |
static int sas_bsg_initialize(struct Scsi_Host *shost, struct sas_rphy *rphy) |
7aa68e80b [SCSI] transport_... |
211 212 213 |
{ struct request_queue *q; int error; |
39dca558a [SCSI] bsg: make ... |
214 |
struct device *dev; |
71610f55f [SCSI] struct dev... |
215 |
char namebuf[20]; |
39dca558a [SCSI] bsg: make ... |
216 |
const char *name; |
93c20a59a [SCSI] scsi_trans... |
217 |
void (*release)(struct device *); |
7aa68e80b [SCSI] transport_... |
218 219 220 221 222 223 |
if (!to_sas_internal(shost->transportt)->f->smp_handler) { printk("%s can't handle SMP requests ", shost->hostt->name); return 0; } |
39dca558a [SCSI] bsg: make ... |
224 |
if (rphy) { |
7aa68e80b [SCSI] transport_... |
225 |
q = blk_init_queue(sas_non_host_smp_request, NULL); |
39dca558a [SCSI] bsg: make ... |
226 |
dev = &rphy->dev; |
71610f55f [SCSI] struct dev... |
227 |
name = dev_name(dev); |
93c20a59a [SCSI] scsi_trans... |
228 |
release = NULL; |
39dca558a [SCSI] bsg: make ... |
229 |
} else { |
7aa68e80b [SCSI] transport_... |
230 |
q = blk_init_queue(sas_host_smp_request, NULL); |
39dca558a [SCSI] bsg: make ... |
231 232 233 234 |
dev = &shost->shost_gendev; snprintf(namebuf, sizeof(namebuf), "sas_host%d", shost->host_no); name = namebuf; |
93c20a59a [SCSI] scsi_trans... |
235 |
release = sas_host_release; |
39dca558a [SCSI] bsg: make ... |
236 |
} |
7aa68e80b [SCSI] transport_... |
237 238 |
if (!q) return -ENOMEM; |
93c20a59a [SCSI] scsi_trans... |
239 |
error = bsg_register_queue(q, dev, name, release); |
7aa68e80b [SCSI] transport_... |
240 241 242 243 244 245 |
if (error) { blk_cleanup_queue(q); return -ENOMEM; } if (rphy) |
b6aff6695 [SCSI] scsi_trans... |
246 247 248 249 250 |
rphy->q = q; else to_sas_host_attrs(shost)->q = q; if (rphy) |
7aa68e80b [SCSI] transport_... |
251 252 253 |
q->queuedata = rphy; else q->queuedata = shost; |
75ad23bc0 block: make queue... |
254 |
queue_flag_set_unlocked(QUEUE_FLAG_BIDI, q); |
7aa68e80b [SCSI] transport_... |
255 256 |
return 0; } |
b6aff6695 [SCSI] scsi_trans... |
257 258 259 260 261 262 263 264 265 266 267 268 269 |
static void sas_bsg_remove(struct Scsi_Host *shost, struct sas_rphy *rphy) { struct request_queue *q; if (rphy) q = rphy->q; else q = to_sas_host_attrs(shost)->q; if (!q) return; bsg_unregister_queue(q); |
b6aff6695 [SCSI] scsi_trans... |
270 |
} |
c7ebbbce3 [SCSI] SAS transp... |
271 272 273 |
/* * SAS host attributes */ |
37be6eeb4 [SCSI] SAS transp... |
274 |
static int sas_host_setup(struct transport_container *tc, struct device *dev, |
ee959b00c SCSI: convert str... |
275 |
struct device *cdev) |
c7ebbbce3 [SCSI] SAS transp... |
276 277 278 279 280 |
{ struct Scsi_Host *shost = dev_to_shost(dev); struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); INIT_LIST_HEAD(&sas_host->rphy_list); |
e02f3f592 [SCSI] remove tar... |
281 |
mutex_init(&sas_host->lock); |
c7ebbbce3 [SCSI] SAS transp... |
282 |
sas_host->next_target_id = 0; |
79cb1819e [SCSI] add prelim... |
283 |
sas_host->next_expander_id = 0; |
c9fefeb26 [SCSI] scsi_trans... |
284 |
sas_host->next_port_id = 0; |
7aa68e80b [SCSI] transport_... |
285 |
|
39dca558a [SCSI] bsg: make ... |
286 |
if (sas_bsg_initialize(shost, NULL)) |
7aa68e80b [SCSI] transport_... |
287 288 289 |
dev_printk(KERN_ERR, dev, "fail to a bsg device %d ", shost->host_no); |
c7ebbbce3 [SCSI] SAS transp... |
290 291 |
return 0; } |
b6aff6695 [SCSI] scsi_trans... |
292 |
static int sas_host_remove(struct transport_container *tc, struct device *dev, |
ee959b00c SCSI: convert str... |
293 |
struct device *cdev) |
b6aff6695 [SCSI] scsi_trans... |
294 295 296 297 298 299 300 |
{ struct Scsi_Host *shost = dev_to_shost(dev); sas_bsg_remove(shost, NULL); return 0; } |
c7ebbbce3 [SCSI] SAS transp... |
301 |
static DECLARE_TRANSPORT_CLASS(sas_host_class, |
b6aff6695 [SCSI] scsi_trans... |
302 |
"sas_host", sas_host_setup, sas_host_remove, NULL); |
c7ebbbce3 [SCSI] SAS transp... |
303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 |
static int sas_host_match(struct attribute_container *cont, struct device *dev) { struct Scsi_Host *shost; struct sas_internal *i; if (!scsi_is_host_device(dev)) return 0; shost = dev_to_shost(dev); if (!shost->transportt) return 0; if (shost->transportt->host_attrs.ac.class != &sas_host_class.class) return 0; i = to_sas_internal(shost->transportt); return &i->t.host_attrs.ac == cont; } static int do_sas_phy_delete(struct device *dev, void *data) { |
65c92b09a [SCSI] scsi_trans... |
326 327 328 329 330 |
int pass = (int)(unsigned long)data; if (pass == 0 && scsi_is_sas_port(dev)) sas_port_delete(dev_to_sas_port(dev)); else if (pass == 1 && scsi_is_sas_phy(dev)) |
c7ebbbce3 [SCSI] SAS transp... |
331 332 333 334 335 |
sas_phy_delete(dev_to_phy(dev)); return 0; } /** |
eb44820c2 [SCSI] Add Docume... |
336 |
* sas_remove_children - tear down a devices SAS data structures |
65c92b09a [SCSI] scsi_trans... |
337 338 339 340 341 342 343 344 345 346 347 348 |
* @dev: device belonging to the sas object * * Removes all SAS PHYs and remote PHYs for a given object */ void sas_remove_children(struct device *dev) { device_for_each_child(dev, (void *)0, do_sas_phy_delete); device_for_each_child(dev, (void *)1, do_sas_phy_delete); } EXPORT_SYMBOL(sas_remove_children); /** |
eb44820c2 [SCSI] Add Docume... |
349 |
* sas_remove_host - tear down a Scsi_Host's SAS data structures |
c7ebbbce3 [SCSI] SAS transp... |
350 351 352 353 354 355 356 |
* @shost: Scsi Host that is torn down * * Removes all SAS PHYs and remote PHYs for a given Scsi_Host. * Must be called just before scsi_remove_host for SAS HBAs. */ void sas_remove_host(struct Scsi_Host *shost) { |
65c92b09a [SCSI] scsi_trans... |
357 |
sas_remove_children(&shost->shost_gendev); |
c7ebbbce3 [SCSI] SAS transp... |
358 359 |
} EXPORT_SYMBOL(sas_remove_host); |
0f88009d5 [SCSI] scsi_trans... |
360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 |
/** * sas_tlr_supported - checking TLR bit in vpd 0x90 * @sdev: scsi device struct * * Check Transport Layer Retries are supported or not. * If vpd page 0x90 is present, TRL is supported. * */ unsigned int sas_tlr_supported(struct scsi_device *sdev) { const int vpd_len = 32; struct sas_end_device *rdev = sas_sdev_to_rdev(sdev); char *buffer = kzalloc(vpd_len, GFP_KERNEL); int ret = 0; if (scsi_get_vpd_page(sdev, 0x90, buffer, vpd_len)) goto out; /* * Magic numbers: the VPD Protocol page (0x90) * has a 4 byte header and then one entry per device port * the TLR bit is at offset 8 on each port entry * if we take the first port, that's at total offset 12 */ ret = buffer[12] & 0x01; out: kfree(buffer); rdev->tlr_supported = ret; return ret; } EXPORT_SYMBOL_GPL(sas_tlr_supported); /** * sas_disable_tlr - setting TLR flags * @sdev: scsi device struct * * Seting tlr_enabled flag to 0. * */ void sas_disable_tlr(struct scsi_device *sdev) { struct sas_end_device *rdev = sas_sdev_to_rdev(sdev); rdev->tlr_enabled = 0; } EXPORT_SYMBOL_GPL(sas_disable_tlr); /** * sas_enable_tlr - setting TLR flags * @sdev: scsi device struct * * Seting tlr_enabled flag 1. * */ void sas_enable_tlr(struct scsi_device *sdev) { unsigned int tlr_supported = 0; tlr_supported = sas_tlr_supported(sdev); if (tlr_supported) { struct sas_end_device *rdev = sas_sdev_to_rdev(sdev); rdev->tlr_enabled = 1; } return; } EXPORT_SYMBOL_GPL(sas_enable_tlr); unsigned int sas_is_tlr_enabled(struct scsi_device *sdev) { struct sas_end_device *rdev = sas_sdev_to_rdev(sdev); return rdev->tlr_enabled; } EXPORT_SYMBOL_GPL(sas_is_tlr_enabled); |
c7ebbbce3 [SCSI] SAS transp... |
439 440 |
/* |
65c92b09a [SCSI] scsi_trans... |
441 |
* SAS Phy attributes |
c7ebbbce3 [SCSI] SAS transp... |
442 443 444 445 |
*/ #define sas_phy_show_simple(field, name, format_string, cast) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
446 447 |
show_sas_phy_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
c7ebbbce3 [SCSI] SAS transp... |
448 |
{ \ |
ee959b00c SCSI: convert str... |
449 |
struct sas_phy *phy = transport_class_to_phy(dev); \ |
c7ebbbce3 [SCSI] SAS transp... |
450 451 452 453 454 455 |
\ return snprintf(buf, 20, format_string, cast phy->field); \ } #define sas_phy_simple_attr(field, name, format_string, type) \ sas_phy_show_simple(field, name, format_string, (type)) \ |
ee959b00c SCSI: convert str... |
456 |
static DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL) |
c7ebbbce3 [SCSI] SAS transp... |
457 458 459 |
#define sas_phy_show_protocol(field, name) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
460 461 |
show_sas_phy_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
c7ebbbce3 [SCSI] SAS transp... |
462 |
{ \ |
ee959b00c SCSI: convert str... |
463 |
struct sas_phy *phy = transport_class_to_phy(dev); \ |
c7ebbbce3 [SCSI] SAS transp... |
464 465 466 467 468 469 470 471 472 |
\ if (!phy->field) \ return snprintf(buf, 20, "none "); \ return get_sas_protocol_names(phy->field, buf); \ } #define sas_phy_protocol_attr(field, name) \ sas_phy_show_protocol(field, name) \ |
ee959b00c SCSI: convert str... |
473 |
static DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL) |
c7ebbbce3 [SCSI] SAS transp... |
474 475 476 |
#define sas_phy_show_linkspeed(field) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
477 478 |
show_sas_phy_##field(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
c7ebbbce3 [SCSI] SAS transp... |
479 |
{ \ |
ee959b00c SCSI: convert str... |
480 |
struct sas_phy *phy = transport_class_to_phy(dev); \ |
c7ebbbce3 [SCSI] SAS transp... |
481 482 483 |
\ return get_sas_linkspeed_names(phy->field, buf); \ } |
d24e1eeb3 [SCSI] scsi_trans... |
484 485 486 |
/* Fudge to tell if we're minimum or maximum */ #define sas_phy_store_linkspeed(field) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
487 488 489 |
store_sas_phy_##field(struct device *dev, \ struct device_attribute *attr, \ const char *buf, size_t count) \ |
d24e1eeb3 [SCSI] scsi_trans... |
490 |
{ \ |
ee959b00c SCSI: convert str... |
491 |
struct sas_phy *phy = transport_class_to_phy(dev); \ |
d24e1eeb3 [SCSI] scsi_trans... |
492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 |
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); \ struct sas_internal *i = to_sas_internal(shost->transportt); \ u32 value; \ struct sas_phy_linkrates rates = {0}; \ int error; \ \ error = set_sas_linkspeed_names(&value, buf); \ if (error) \ return error; \ rates.field = value; \ error = i->f->set_phy_speed(phy, &rates); \ \ return error ? error : count; \ } #define sas_phy_linkspeed_rw_attr(field) \ sas_phy_show_linkspeed(field) \ sas_phy_store_linkspeed(field) \ |
ee959b00c SCSI: convert str... |
510 |
static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, \ |
d24e1eeb3 [SCSI] scsi_trans... |
511 |
store_sas_phy_##field) |
c7ebbbce3 [SCSI] SAS transp... |
512 513 |
#define sas_phy_linkspeed_attr(field) \ sas_phy_show_linkspeed(field) \ |
ee959b00c SCSI: convert str... |
514 |
static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL) |
c7ebbbce3 [SCSI] SAS transp... |
515 |
|
d24e1eeb3 [SCSI] scsi_trans... |
516 |
|
c3ee74c4e [SCSI] scsi_trans... |
517 518 |
#define sas_phy_show_linkerror(field) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
519 520 |
show_sas_phy_##field(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
c3ee74c4e [SCSI] scsi_trans... |
521 |
{ \ |
ee959b00c SCSI: convert str... |
522 |
struct sas_phy *phy = transport_class_to_phy(dev); \ |
c3ee74c4e [SCSI] scsi_trans... |
523 524 525 526 |
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); \ struct sas_internal *i = to_sas_internal(shost->transportt); \ int error; \ \ |
dd9fbb521 [SCSI] make some ... |
527 |
error = i->f->get_linkerrors ? i->f->get_linkerrors(phy) : 0; \ |
c3ee74c4e [SCSI] scsi_trans... |
528 529 530 531 532 533 534 535 |
if (error) \ return error; \ return snprintf(buf, 20, "%u ", phy->field); \ } #define sas_phy_linkerror_attr(field) \ sas_phy_show_linkerror(field) \ |
ee959b00c SCSI: convert str... |
536 |
static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL) |
c3ee74c4e [SCSI] scsi_trans... |
537 |
|
c7ebbbce3 [SCSI] SAS transp... |
538 |
static ssize_t |
ee959b00c SCSI: convert str... |
539 540 |
show_sas_device_type(struct device *dev, struct device_attribute *attr, char *buf) |
c7ebbbce3 [SCSI] SAS transp... |
541 |
{ |
ee959b00c SCSI: convert str... |
542 |
struct sas_phy *phy = transport_class_to_phy(dev); |
c7ebbbce3 [SCSI] SAS transp... |
543 544 545 546 547 548 |
if (!phy->identify.device_type) return snprintf(buf, 20, "none "); return get_sas_device_type_names(phy->identify.device_type, buf); } |
ee959b00c SCSI: convert str... |
549 |
static DEVICE_ATTR(device_type, S_IRUGO, show_sas_device_type, NULL); |
c7ebbbce3 [SCSI] SAS transp... |
550 |
|
ee959b00c SCSI: convert str... |
551 |
static ssize_t do_sas_phy_enable(struct device *dev, |
acbf167d4 [SCSI] libsas: Ad... |
552 553 |
size_t count, int enable) { |
ee959b00c SCSI: convert str... |
554 |
struct sas_phy *phy = transport_class_to_phy(dev); |
acbf167d4 [SCSI] libsas: Ad... |
555 556 557 558 559 560 561 562 563 564 |
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); struct sas_internal *i = to_sas_internal(shost->transportt); int error; error = i->f->phy_enable(phy, enable); if (error) return error; phy->enabled = enable; return count; }; |
ee959b00c SCSI: convert str... |
565 566 567 |
static ssize_t store_sas_phy_enable(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
acbf167d4 [SCSI] libsas: Ad... |
568 569 570 571 572 573 |
{ if (count < 1) return -EINVAL; switch (buf[0]) { case '0': |
ee959b00c SCSI: convert str... |
574 |
do_sas_phy_enable(dev, count, 0); |
acbf167d4 [SCSI] libsas: Ad... |
575 576 |
break; case '1': |
ee959b00c SCSI: convert str... |
577 |
do_sas_phy_enable(dev, count, 1); |
acbf167d4 [SCSI] libsas: Ad... |
578 579 580 581 582 583 584 |
break; default: return -EINVAL; } return count; } |
ee959b00c SCSI: convert str... |
585 586 587 |
static ssize_t show_sas_phy_enable(struct device *dev, struct device_attribute *attr, char *buf) |
acbf167d4 [SCSI] libsas: Ad... |
588 |
{ |
ee959b00c SCSI: convert str... |
589 |
struct sas_phy *phy = transport_class_to_phy(dev); |
acbf167d4 [SCSI] libsas: Ad... |
590 591 592 |
return snprintf(buf, 20, "%d", phy->enabled); } |
ee959b00c SCSI: convert str... |
593 |
static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, show_sas_phy_enable, |
acbf167d4 [SCSI] libsas: Ad... |
594 |
store_sas_phy_enable); |
ee959b00c SCSI: convert str... |
595 596 |
static ssize_t do_sas_phy_reset(struct device *dev, size_t count, int hard_reset) |
07ba3a954 [SCSI] sas: add s... |
597 |
{ |
ee959b00c SCSI: convert str... |
598 |
struct sas_phy *phy = transport_class_to_phy(dev); |
07ba3a954 [SCSI] sas: add s... |
599 600 601 |
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); struct sas_internal *i = to_sas_internal(shost->transportt); int error; |
07ba3a954 [SCSI] sas: add s... |
602 603 604 605 606 |
error = i->f->phy_reset(phy, hard_reset); if (error) return error; return count; }; |
ee959b00c SCSI: convert str... |
607 608 609 |
static ssize_t store_sas_link_reset(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
07ba3a954 [SCSI] sas: add s... |
610 |
{ |
ee959b00c SCSI: convert str... |
611 |
return do_sas_phy_reset(dev, count, 0); |
07ba3a954 [SCSI] sas: add s... |
612 |
} |
ee959b00c SCSI: convert str... |
613 |
static DEVICE_ATTR(link_reset, S_IWUSR, NULL, store_sas_link_reset); |
07ba3a954 [SCSI] sas: add s... |
614 |
|
ee959b00c SCSI: convert str... |
615 616 617 |
static ssize_t store_sas_hard_reset(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
07ba3a954 [SCSI] sas: add s... |
618 |
{ |
ee959b00c SCSI: convert str... |
619 |
return do_sas_phy_reset(dev, count, 1); |
07ba3a954 [SCSI] sas: add s... |
620 |
} |
ee959b00c SCSI: convert str... |
621 |
static DEVICE_ATTR(hard_reset, S_IWUSR, NULL, store_sas_hard_reset); |
07ba3a954 [SCSI] sas: add s... |
622 |
|
c7ebbbce3 [SCSI] SAS transp... |
623 624 625 626 627 628 629 630 631 |
sas_phy_protocol_attr(identify.initiator_port_protocols, initiator_port_protocols); sas_phy_protocol_attr(identify.target_port_protocols, target_port_protocols); sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx ", unsigned long long); sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d ", u8); |
c9fefeb26 [SCSI] scsi_trans... |
632 633 |
//sas_phy_simple_attr(port_identifier, port_identifier, "%d ", int); |
c7ebbbce3 [SCSI] SAS transp... |
634 635 |
sas_phy_linkspeed_attr(negotiated_linkrate); sas_phy_linkspeed_attr(minimum_linkrate_hw); |
d24e1eeb3 [SCSI] scsi_trans... |
636 |
sas_phy_linkspeed_rw_attr(minimum_linkrate); |
c7ebbbce3 [SCSI] SAS transp... |
637 |
sas_phy_linkspeed_attr(maximum_linkrate_hw); |
d24e1eeb3 [SCSI] scsi_trans... |
638 |
sas_phy_linkspeed_rw_attr(maximum_linkrate); |
c3ee74c4e [SCSI] scsi_trans... |
639 640 641 642 |
sas_phy_linkerror_attr(invalid_dword_count); sas_phy_linkerror_attr(running_disparity_error_count); sas_phy_linkerror_attr(loss_of_dword_sync_count); sas_phy_linkerror_attr(phy_reset_problem_count); |
c7ebbbce3 [SCSI] SAS transp... |
643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 |
static DECLARE_TRANSPORT_CLASS(sas_phy_class, "sas_phy", NULL, NULL, NULL); static int sas_phy_match(struct attribute_container *cont, struct device *dev) { struct Scsi_Host *shost; struct sas_internal *i; if (!scsi_is_sas_phy(dev)) return 0; shost = dev_to_shost(dev->parent); if (!shost->transportt) return 0; if (shost->transportt->host_attrs.ac.class != &sas_host_class.class) return 0; i = to_sas_internal(shost->transportt); return &i->phy_attr_cont.ac == cont; } static void sas_phy_release(struct device *dev) { struct sas_phy *phy = dev_to_phy(dev); put_device(dev->parent); kfree(phy); } /** |
eb44820c2 [SCSI] Add Docume... |
676 |
* sas_phy_alloc - allocates and initialize a SAS PHY structure |
c7ebbbce3 [SCSI] SAS transp... |
677 |
* @parent: Parent device |
d99ca4180 [SCSI] scsi_trans... |
678 |
* @number: Phy index |
c7ebbbce3 [SCSI] SAS transp... |
679 680 681 682 683 684 685 686 687 688 689 690 |
* * Allocates an SAS PHY structure. It will be added in the device tree * below the device specified by @parent, which has to be either a Scsi_Host * or sas_rphy. * * Returns: * SAS PHY allocated or %NULL if the allocation failed. */ struct sas_phy *sas_phy_alloc(struct device *parent, int number) { struct Scsi_Host *shost = dev_to_shost(parent); struct sas_phy *phy; |
24669f75a [SCSI] SCSI core ... |
691 |
phy = kzalloc(sizeof(*phy), GFP_KERNEL); |
c7ebbbce3 [SCSI] SAS transp... |
692 693 |
if (!phy) return NULL; |
c7ebbbce3 [SCSI] SAS transp... |
694 |
|
c7ebbbce3 [SCSI] SAS transp... |
695 |
phy->number = number; |
acbf167d4 [SCSI] libsas: Ad... |
696 |
phy->enabled = 1; |
c7ebbbce3 [SCSI] SAS transp... |
697 698 699 700 |
device_initialize(&phy->dev); phy->dev.parent = get_device(parent); phy->dev.release = sas_phy_release; |
65c92b09a [SCSI] scsi_trans... |
701 |
INIT_LIST_HEAD(&phy->port_siblings); |
79cb1819e [SCSI] add prelim... |
702 703 |
if (scsi_is_sas_expander_device(parent)) { struct sas_rphy *rphy = dev_to_rphy(parent); |
71610f55f [SCSI] struct dev... |
704 |
dev_set_name(&phy->dev, "phy-%d:%d:%d", shost->host_no, |
79cb1819e [SCSI] add prelim... |
705 706 |
rphy->scsi_target_id, number); } else |
71610f55f [SCSI] struct dev... |
707 |
dev_set_name(&phy->dev, "phy-%d:%d", shost->host_no, number); |
c7ebbbce3 [SCSI] SAS transp... |
708 709 710 711 712 713 714 715 |
transport_setup_device(&phy->dev); return phy; } EXPORT_SYMBOL(sas_phy_alloc); /** |
eb44820c2 [SCSI] Add Docume... |
716 |
* sas_phy_add - add a SAS PHY to the device hierarchy |
c7ebbbce3 [SCSI] SAS transp... |
717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 |
* @phy: The PHY to be added * * Publishes a SAS PHY to the rest of the system. */ int sas_phy_add(struct sas_phy *phy) { int error; error = device_add(&phy->dev); if (!error) { transport_add_device(&phy->dev); transport_configure_device(&phy->dev); } return error; } EXPORT_SYMBOL(sas_phy_add); /** |
eb44820c2 [SCSI] Add Docume... |
736 |
* sas_phy_free - free a SAS PHY |
c7ebbbce3 [SCSI] SAS transp... |
737 738 739 740 741 742 |
* @phy: SAS PHY to free * * Frees the specified SAS PHY. * * Note: * This function must only be called on a PHY that has not |
af901ca18 tree-wide: fix as... |
743 |
* successfully been added using sas_phy_add(). |
c7ebbbce3 [SCSI] SAS transp... |
744 745 746 747 |
*/ void sas_phy_free(struct sas_phy *phy) { transport_destroy_device(&phy->dev); |
92aab6464 [SCSI] sas transp... |
748 |
put_device(&phy->dev); |
c7ebbbce3 [SCSI] SAS transp... |
749 750 751 752 |
} EXPORT_SYMBOL(sas_phy_free); /** |
eb44820c2 [SCSI] Add Docume... |
753 |
* sas_phy_delete - remove SAS PHY |
c7ebbbce3 [SCSI] SAS transp... |
754 755 756 757 758 759 760 761 762 |
* @phy: SAS PHY to remove * * Removes the specified SAS PHY. If the SAS PHY has an * associated remote PHY it is removed before. */ void sas_phy_delete(struct sas_phy *phy) { struct device *dev = &phy->dev; |
65c92b09a [SCSI] scsi_trans... |
763 764 |
/* this happens if the phy is still part of a port when deleted */ BUG_ON(!list_empty(&phy->port_siblings)); |
c7ebbbce3 [SCSI] SAS transp... |
765 766 767 768 |
transport_remove_device(dev); device_del(dev); transport_destroy_device(dev); |
92aab6464 [SCSI] sas transp... |
769 |
put_device(dev); |
c7ebbbce3 [SCSI] SAS transp... |
770 771 772 773 |
} EXPORT_SYMBOL(sas_phy_delete); /** |
eb44820c2 [SCSI] Add Docume... |
774 |
* scsi_is_sas_phy - check if a struct device represents a SAS PHY |
c7ebbbce3 [SCSI] SAS transp... |
775 776 777 778 779 780 781 782 783 784 785 786 |
* @dev: device to check * * Returns: * %1 if the device represents a SAS PHY, %0 else */ int scsi_is_sas_phy(const struct device *dev) { return dev->release == sas_phy_release; } EXPORT_SYMBOL(scsi_is_sas_phy); /* |
65c92b09a [SCSI] scsi_trans... |
787 788 789 790 |
* SAS Port attributes */ #define sas_port_show_simple(field, name, format_string, cast) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
791 792 |
show_sas_port_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
65c92b09a [SCSI] scsi_trans... |
793 |
{ \ |
ee959b00c SCSI: convert str... |
794 |
struct sas_port *port = transport_class_to_sas_port(dev); \ |
65c92b09a [SCSI] scsi_trans... |
795 796 797 798 799 800 |
\ return snprintf(buf, 20, format_string, cast port->field); \ } #define sas_port_simple_attr(field, name, format_string, type) \ sas_port_show_simple(field, name, format_string, (type)) \ |
ee959b00c SCSI: convert str... |
801 |
static DEVICE_ATTR(name, S_IRUGO, show_sas_port_##name, NULL) |
65c92b09a [SCSI] scsi_trans... |
802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 |
sas_port_simple_attr(num_phys, num_phys, "%d ", int); static DECLARE_TRANSPORT_CLASS(sas_port_class, "sas_port", NULL, NULL, NULL); static int sas_port_match(struct attribute_container *cont, struct device *dev) { struct Scsi_Host *shost; struct sas_internal *i; if (!scsi_is_sas_port(dev)) return 0; shost = dev_to_shost(dev->parent); if (!shost->transportt) return 0; if (shost->transportt->host_attrs.ac.class != &sas_host_class.class) return 0; i = to_sas_internal(shost->transportt); return &i->port_attr_cont.ac == cont; } static void sas_port_release(struct device *dev) { struct sas_port *port = dev_to_sas_port(dev); BUG_ON(!list_empty(&port->phy_list)); put_device(dev->parent); kfree(port); } static void sas_port_create_link(struct sas_port *port, struct sas_phy *phy) { |
214349664 [SCSI] libsas: Ch... |
842 843 844 |
int res; res = sysfs_create_link(&port->dev.kobj, &phy->dev.kobj, |
71610f55f [SCSI] struct dev... |
845 |
dev_name(&phy->dev)); |
214349664 [SCSI] libsas: Ch... |
846 847 848 849 850 851 852 853 854 |
if (res) goto err; res = sysfs_create_link(&phy->dev.kobj, &port->dev.kobj, "port"); if (res) goto err; return; err: printk(KERN_ERR "%s: Cannot create port links, err=%d ", |
cadbd4a5e [SCSI] replace __... |
855 |
__func__, res); |
65c92b09a [SCSI] scsi_trans... |
856 857 858 859 860 |
} static void sas_port_delete_link(struct sas_port *port, struct sas_phy *phy) { |
71610f55f [SCSI] struct dev... |
861 |
sysfs_remove_link(&port->dev.kobj, dev_name(&phy->dev)); |
65c92b09a [SCSI] scsi_trans... |
862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 |
sysfs_remove_link(&phy->dev.kobj, "port"); } /** sas_port_alloc - allocate and initialize a SAS port structure * * @parent: parent device * @port_id: port number * * Allocates a SAS port structure. It will be added to the device tree * below the device specified by @parent which must be either a Scsi_Host * or a sas_expander_device. * * Returns %NULL on error */ struct sas_port *sas_port_alloc(struct device *parent, int port_id) { struct Scsi_Host *shost = dev_to_shost(parent); struct sas_port *port; port = kzalloc(sizeof(*port), GFP_KERNEL); if (!port) return NULL; port->port_identifier = port_id; device_initialize(&port->dev); port->dev.parent = get_device(parent); port->dev.release = sas_port_release; mutex_init(&port->phy_list_mutex); INIT_LIST_HEAD(&port->phy_list); if (scsi_is_sas_expander_device(parent)) { struct sas_rphy *rphy = dev_to_rphy(parent); |
71610f55f [SCSI] struct dev... |
897 898 |
dev_set_name(&port->dev, "port-%d:%d:%d", shost->host_no, rphy->scsi_target_id, port->port_identifier); |
65c92b09a [SCSI] scsi_trans... |
899 |
} else |
71610f55f [SCSI] struct dev... |
900 901 |
dev_set_name(&port->dev, "port-%d:%d", shost->host_no, port->port_identifier); |
65c92b09a [SCSI] scsi_trans... |
902 903 904 905 906 907 |
transport_setup_device(&port->dev); return port; } EXPORT_SYMBOL(sas_port_alloc); |
c9fefeb26 [SCSI] scsi_trans... |
908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 |
/** sas_port_alloc_num - allocate and initialize a SAS port structure * * @parent: parent device * * Allocates a SAS port structure and a number to go with it. This * interface is really for adapters where the port number has no * meansing, so the sas class should manage them. It will be added to * the device tree below the device specified by @parent which must be * either a Scsi_Host or a sas_expander_device. * * Returns %NULL on error */ struct sas_port *sas_port_alloc_num(struct device *parent) { int index; struct Scsi_Host *shost = dev_to_shost(parent); struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); /* FIXME: use idr for this eventually */ mutex_lock(&sas_host->lock); if (scsi_is_sas_expander_device(parent)) { struct sas_rphy *rphy = dev_to_rphy(parent); struct sas_expander_device *exp = rphy_to_expander_device(rphy); index = exp->next_port_id++; } else index = sas_host->next_port_id++; mutex_unlock(&sas_host->lock); return sas_port_alloc(parent, index); } EXPORT_SYMBOL(sas_port_alloc_num); |
65c92b09a [SCSI] scsi_trans... |
939 940 |
/** * sas_port_add - add a SAS port to the device hierarchy |
65c92b09a [SCSI] scsi_trans... |
941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 |
* @port: port to be added * * publishes a port to the rest of the system */ int sas_port_add(struct sas_port *port) { int error; /* No phys should be added until this is made visible */ BUG_ON(!list_empty(&port->phy_list)); error = device_add(&port->dev); if (error) return error; transport_add_device(&port->dev); transport_configure_device(&port->dev); return 0; } EXPORT_SYMBOL(sas_port_add); /** |
eb44820c2 [SCSI] Add Docume... |
965 |
* sas_port_free - free a SAS PORT |
65c92b09a [SCSI] scsi_trans... |
966 967 968 969 970 971 |
* @port: SAS PORT to free * * Frees the specified SAS PORT. * * Note: * This function must only be called on a PORT that has not |
af901ca18 tree-wide: fix as... |
972 |
* successfully been added using sas_port_add(). |
65c92b09a [SCSI] scsi_trans... |
973 974 975 976 977 978 979 980 981 |
*/ void sas_port_free(struct sas_port *port) { transport_destroy_device(&port->dev); put_device(&port->dev); } EXPORT_SYMBOL(sas_port_free); /** |
eb44820c2 [SCSI] Add Docume... |
982 |
* sas_port_delete - remove SAS PORT |
65c92b09a [SCSI] scsi_trans... |
983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 |
* @port: SAS PORT to remove * * Removes the specified SAS PORT. If the SAS PORT has an * associated phys, unlink them from the port as well. */ void sas_port_delete(struct sas_port *port) { struct device *dev = &port->dev; struct sas_phy *phy, *tmp_phy; if (port->rphy) { sas_rphy_delete(port->rphy); port->rphy = NULL; } mutex_lock(&port->phy_list_mutex); list_for_each_entry_safe(phy, tmp_phy, &port->phy_list, port_siblings) { sas_port_delete_link(port, phy); list_del_init(&phy->port_siblings); } mutex_unlock(&port->phy_list_mutex); |
a0e1b6ef3 [SCSI] scsi_trans... |
1005 1006 |
if (port->is_backlink) { struct device *parent = port->dev.parent; |
71610f55f [SCSI] struct dev... |
1007 |
sysfs_remove_link(&port->dev.kobj, dev_name(parent)); |
a0e1b6ef3 [SCSI] scsi_trans... |
1008 1009 |
port->is_backlink = 0; } |
65c92b09a [SCSI] scsi_trans... |
1010 1011 1012 1013 1014 1015 1016 1017 |
transport_remove_device(dev); device_del(dev); transport_destroy_device(dev); put_device(dev); } EXPORT_SYMBOL(sas_port_delete); /** |
eb44820c2 [SCSI] Add Docume... |
1018 |
* scsi_is_sas_port - check if a struct device represents a SAS port |
65c92b09a [SCSI] scsi_trans... |
1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 |
* @dev: device to check * * Returns: * %1 if the device represents a SAS Port, %0 else */ int scsi_is_sas_port(const struct device *dev) { return dev->release == sas_port_release; } EXPORT_SYMBOL(scsi_is_sas_port); /** * sas_port_add_phy - add another phy to a port to form a wide port * @port: port to add the phy to * @phy: phy to add * * When a port is initially created, it is empty (has no phys). All * ports must have at least one phy to operated, and all wide ports * must have at least two. The current code makes no difference * between ports and wide ports, but the only object that can be * connected to a remote device is a port, so ports must be formed on * all devices with phys if they're connected to anything. */ void sas_port_add_phy(struct sas_port *port, struct sas_phy *phy) { mutex_lock(&port->phy_list_mutex); if (unlikely(!list_empty(&phy->port_siblings))) { /* make sure we're already on this port */ struct sas_phy *tmp; list_for_each_entry(tmp, &port->phy_list, port_siblings) if (tmp == phy) break; /* If this trips, you added a phy that was already * part of a different port */ if (unlikely(tmp != phy)) { |
71610f55f [SCSI] struct dev... |
1055 1056 1057 |
dev_printk(KERN_ERR, &port->dev, "trying to add phy %s fails: it's already part of another port ", dev_name(&phy->dev)); |
65c92b09a [SCSI] scsi_trans... |
1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 |
BUG(); } } else { sas_port_create_link(port, phy); list_add_tail(&phy->port_siblings, &port->phy_list); port->num_phys++; } mutex_unlock(&port->phy_list_mutex); } EXPORT_SYMBOL(sas_port_add_phy); /** * sas_port_delete_phy - remove a phy from a port or wide port * @port: port to remove the phy from * @phy: phy to remove * * This operation is used for tearing down ports again. It must be * done to every port or wide port before calling sas_port_delete. */ void sas_port_delete_phy(struct sas_port *port, struct sas_phy *phy) { mutex_lock(&port->phy_list_mutex); sas_port_delete_link(port, phy); list_del_init(&phy->port_siblings); port->num_phys--; mutex_unlock(&port->phy_list_mutex); } EXPORT_SYMBOL(sas_port_delete_phy); |
a0e1b6ef3 [SCSI] scsi_trans... |
1086 1087 |
void sas_port_mark_backlink(struct sas_port *port) { |
214349664 [SCSI] libsas: Ch... |
1088 |
int res; |
a0e1b6ef3 [SCSI] scsi_trans... |
1089 1090 1091 1092 1093 |
struct device *parent = port->dev.parent->parent->parent; if (port->is_backlink) return; port->is_backlink = 1; |
214349664 [SCSI] libsas: Ch... |
1094 |
res = sysfs_create_link(&port->dev.kobj, &parent->kobj, |
71610f55f [SCSI] struct dev... |
1095 |
dev_name(parent)); |
214349664 [SCSI] libsas: Ch... |
1096 1097 1098 1099 1100 1101 |
if (res) goto err; return; err: printk(KERN_ERR "%s: Cannot create port backlink, err=%d ", |
cadbd4a5e [SCSI] replace __... |
1102 |
__func__, res); |
a0e1b6ef3 [SCSI] scsi_trans... |
1103 1104 1105 |
} EXPORT_SYMBOL(sas_port_mark_backlink); |
65c92b09a [SCSI] scsi_trans... |
1106 |
/* |
c7ebbbce3 [SCSI] SAS transp... |
1107 1108 1109 1110 1111 |
* SAS remote PHY attributes. */ #define sas_rphy_show_simple(field, name, format_string, cast) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
1112 1113 |
show_sas_rphy_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
c7ebbbce3 [SCSI] SAS transp... |
1114 |
{ \ |
ee959b00c SCSI: convert str... |
1115 |
struct sas_rphy *rphy = transport_class_to_rphy(dev); \ |
c7ebbbce3 [SCSI] SAS transp... |
1116 1117 1118 1119 1120 1121 |
\ return snprintf(buf, 20, format_string, cast rphy->field); \ } #define sas_rphy_simple_attr(field, name, format_string, type) \ sas_rphy_show_simple(field, name, format_string, (type)) \ |
ee959b00c SCSI: convert str... |
1122 |
static SAS_DEVICE_ATTR(rphy, name, S_IRUGO, \ |
c7ebbbce3 [SCSI] SAS transp... |
1123 1124 1125 1126 |
show_sas_rphy_##name, NULL) #define sas_rphy_show_protocol(field, name) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
1127 1128 |
show_sas_rphy_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
c7ebbbce3 [SCSI] SAS transp... |
1129 |
{ \ |
ee959b00c SCSI: convert str... |
1130 |
struct sas_rphy *rphy = transport_class_to_rphy(dev); \ |
c7ebbbce3 [SCSI] SAS transp... |
1131 1132 1133 1134 1135 1136 1137 1138 1139 |
\ if (!rphy->field) \ return snprintf(buf, 20, "none "); \ return get_sas_protocol_names(rphy->field, buf); \ } #define sas_rphy_protocol_attr(field, name) \ sas_rphy_show_protocol(field, name) \ |
ee959b00c SCSI: convert str... |
1140 |
static SAS_DEVICE_ATTR(rphy, name, S_IRUGO, \ |
c7ebbbce3 [SCSI] SAS transp... |
1141 1142 1143 |
show_sas_rphy_##name, NULL) static ssize_t |
ee959b00c SCSI: convert str... |
1144 1145 |
show_sas_rphy_device_type(struct device *dev, struct device_attribute *attr, char *buf) |
c7ebbbce3 [SCSI] SAS transp... |
1146 |
{ |
ee959b00c SCSI: convert str... |
1147 |
struct sas_rphy *rphy = transport_class_to_rphy(dev); |
c7ebbbce3 [SCSI] SAS transp... |
1148 1149 1150 1151 1152 1153 1154 |
if (!rphy->identify.device_type) return snprintf(buf, 20, "none "); return get_sas_device_type_names( rphy->identify.device_type, buf); } |
ee959b00c SCSI: convert str... |
1155 |
static SAS_DEVICE_ATTR(rphy, device_type, S_IRUGO, |
c7ebbbce3 [SCSI] SAS transp... |
1156 |
show_sas_rphy_device_type, NULL); |
a01256413 [SCSI] sas: add s... |
1157 |
static ssize_t |
ee959b00c SCSI: convert str... |
1158 1159 |
show_sas_rphy_enclosure_identifier(struct device *dev, struct device_attribute *attr, char *buf) |
a01256413 [SCSI] sas: add s... |
1160 |
{ |
ee959b00c SCSI: convert str... |
1161 |
struct sas_rphy *rphy = transport_class_to_rphy(dev); |
a01256413 [SCSI] sas: add s... |
1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 |
struct sas_phy *phy = dev_to_phy(rphy->dev.parent); struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); struct sas_internal *i = to_sas_internal(shost->transportt); u64 identifier; int error; /* * Only devices behind an expander are supported, because the * enclosure identifier is a SMP feature. */ |
f4ad7b580 [SCSI] scsi_trans... |
1172 |
if (scsi_is_sas_phy_local(phy)) |
a01256413 [SCSI] sas: add s... |
1173 1174 1175 1176 1177 1178 1179 1180 |
return -EINVAL; error = i->f->get_enclosure_identifier(rphy, &identifier); if (error) return error; return sprintf(buf, "0x%llx ", (unsigned long long)identifier); } |
ee959b00c SCSI: convert str... |
1181 |
static SAS_DEVICE_ATTR(rphy, enclosure_identifier, S_IRUGO, |
a01256413 [SCSI] sas: add s... |
1182 1183 1184 |
show_sas_rphy_enclosure_identifier, NULL); static ssize_t |
ee959b00c SCSI: convert str... |
1185 1186 |
show_sas_rphy_bay_identifier(struct device *dev, struct device_attribute *attr, char *buf) |
a01256413 [SCSI] sas: add s... |
1187 |
{ |
ee959b00c SCSI: convert str... |
1188 |
struct sas_rphy *rphy = transport_class_to_rphy(dev); |
a01256413 [SCSI] sas: add s... |
1189 1190 1191 1192 |
struct sas_phy *phy = dev_to_phy(rphy->dev.parent); struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); struct sas_internal *i = to_sas_internal(shost->transportt); int val; |
f4ad7b580 [SCSI] scsi_trans... |
1193 |
if (scsi_is_sas_phy_local(phy)) |
a01256413 [SCSI] sas: add s... |
1194 1195 1196 1197 1198 1199 1200 1201 |
return -EINVAL; val = i->f->get_bay_identifier(rphy); if (val < 0) return val; return sprintf(buf, "%d ", val); } |
ee959b00c SCSI: convert str... |
1202 |
static SAS_DEVICE_ATTR(rphy, bay_identifier, S_IRUGO, |
a01256413 [SCSI] sas: add s... |
1203 |
show_sas_rphy_bay_identifier, NULL); |
c7ebbbce3 [SCSI] SAS transp... |
1204 1205 1206 1207 1208 1209 1210 1211 |
sas_rphy_protocol_attr(identify.initiator_port_protocols, initiator_port_protocols); sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols); sas_rphy_simple_attr(identify.sas_address, sas_address, "0x%016llx ", unsigned long long); sas_rphy_simple_attr(identify.phy_identifier, phy_identifier, "%d ", u8); |
42ab03609 [PATCH] convert a... |
1212 1213 1214 1215 1216 1217 |
/* only need 8 bytes of data plus header (4 or 8) */ #define BUF_SIZE 64 int sas_read_port_mode_page(struct scsi_device *sdev) { char *buffer = kzalloc(BUF_SIZE, GFP_KERNEL), *msdata; |
0f88009d5 [SCSI] scsi_trans... |
1218 |
struct sas_end_device *rdev = sas_sdev_to_rdev(sdev); |
42ab03609 [PATCH] convert a... |
1219 1220 |
struct scsi_mode_data mode_data; int res, error; |
42ab03609 [PATCH] convert a... |
1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 |
if (!buffer) return -ENOMEM; res = scsi_mode_sense(sdev, 1, 0x19, buffer, BUF_SIZE, 30*HZ, 3, &mode_data, NULL); error = -EINVAL; if (!scsi_status_is_good(res)) goto out; msdata = buffer + mode_data.header_length + mode_data.block_descriptor_length; if (msdata - buffer > BUF_SIZE - 8) goto out; error = 0; rdev->ready_led_meaning = msdata[2] & 0x10 ? 1 : 0; rdev->I_T_nexus_loss_timeout = (msdata[4] << 8) + msdata[5]; rdev->initiator_response_timeout = (msdata[6] << 8) + msdata[7]; out: kfree(buffer); return error; } EXPORT_SYMBOL(sas_read_port_mode_page); |
79cb1819e [SCSI] add prelim... |
1248 1249 |
static DECLARE_TRANSPORT_CLASS(sas_end_dev_class, "sas_end_device", NULL, NULL, NULL); |
42ab03609 [PATCH] convert a... |
1250 1251 |
#define sas_end_dev_show_simple(field, name, format_string, cast) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
1252 1253 |
show_sas_end_dev_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
42ab03609 [PATCH] convert a... |
1254 |
{ \ |
ee959b00c SCSI: convert str... |
1255 |
struct sas_rphy *rphy = transport_class_to_rphy(dev); \ |
42ab03609 [PATCH] convert a... |
1256 1257 1258 1259 1260 1261 1262 |
struct sas_end_device *rdev = rphy_to_end_device(rphy); \ \ return snprintf(buf, 20, format_string, cast rdev->field); \ } #define sas_end_dev_simple_attr(field, name, format_string, type) \ sas_end_dev_show_simple(field, name, format_string, (type)) \ |
ee959b00c SCSI: convert str... |
1263 |
static SAS_DEVICE_ATTR(end_dev, name, S_IRUGO, \ |
42ab03609 [PATCH] convert a... |
1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 |
show_sas_end_dev_##name, NULL) sas_end_dev_simple_attr(ready_led_meaning, ready_led_meaning, "%d ", int); sas_end_dev_simple_attr(I_T_nexus_loss_timeout, I_T_nexus_loss_timeout, "%d ", int); sas_end_dev_simple_attr(initiator_response_timeout, initiator_response_timeout, "%d ", int); |
0f88009d5 [SCSI] scsi_trans... |
1274 1275 1276 1277 1278 1279 |
sas_end_dev_simple_attr(tlr_supported, tlr_supported, "%d ", int); sas_end_dev_simple_attr(tlr_enabled, tlr_enabled, "%d ", int); |
42ab03609 [PATCH] convert a... |
1280 |
|
79cb1819e [SCSI] add prelim... |
1281 1282 1283 1284 1285 |
static DECLARE_TRANSPORT_CLASS(sas_expander_class, "sas_expander", NULL, NULL, NULL); #define sas_expander_show_simple(field, name, format_string, cast) \ static ssize_t \ |
ee959b00c SCSI: convert str... |
1286 1287 |
show_sas_expander_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ |
79cb1819e [SCSI] add prelim... |
1288 |
{ \ |
ee959b00c SCSI: convert str... |
1289 |
struct sas_rphy *rphy = transport_class_to_rphy(dev); \ |
79cb1819e [SCSI] add prelim... |
1290 1291 1292 1293 1294 1295 1296 |
struct sas_expander_device *edev = rphy_to_expander_device(rphy); \ \ return snprintf(buf, 20, format_string, cast edev->field); \ } #define sas_expander_simple_attr(field, name, format_string, type) \ sas_expander_show_simple(field, name, format_string, (type)) \ |
ee959b00c SCSI: convert str... |
1297 |
static SAS_DEVICE_ATTR(expander, name, S_IRUGO, \ |
79cb1819e [SCSI] add prelim... |
1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 |
show_sas_expander_##name, NULL) sas_expander_simple_attr(vendor_id, vendor_id, "%s ", char *); sas_expander_simple_attr(product_id, product_id, "%s ", char *); sas_expander_simple_attr(product_rev, product_rev, "%s ", char *); sas_expander_simple_attr(component_vendor_id, component_vendor_id, "%s ", char *); sas_expander_simple_attr(component_id, component_id, "%u ", unsigned int); sas_expander_simple_attr(component_revision_id, component_revision_id, "%u ", unsigned int); sas_expander_simple_attr(level, level, "%d ", int); |
42ab03609 [PATCH] convert a... |
1316 |
|
c7ebbbce3 [SCSI] SAS transp... |
1317 |
static DECLARE_TRANSPORT_CLASS(sas_rphy_class, |
2f8600dff [SCSI] eliminate ... |
1318 |
"sas_device", NULL, NULL, NULL); |
c7ebbbce3 [SCSI] SAS transp... |
1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 |
static int sas_rphy_match(struct attribute_container *cont, struct device *dev) { struct Scsi_Host *shost; struct sas_internal *i; if (!scsi_is_sas_rphy(dev)) return 0; shost = dev_to_shost(dev->parent->parent); if (!shost->transportt) return 0; if (shost->transportt->host_attrs.ac.class != &sas_host_class.class) return 0; i = to_sas_internal(shost->transportt); return &i->rphy_attr_cont.ac == cont; } |
42ab03609 [PATCH] convert a... |
1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 |
static int sas_end_dev_match(struct attribute_container *cont, struct device *dev) { struct Scsi_Host *shost; struct sas_internal *i; struct sas_rphy *rphy; if (!scsi_is_sas_rphy(dev)) return 0; shost = dev_to_shost(dev->parent->parent); rphy = dev_to_rphy(dev); if (!shost->transportt) return 0; if (shost->transportt->host_attrs.ac.class != &sas_host_class.class) return 0; i = to_sas_internal(shost->transportt); return &i->end_dev_attr_cont.ac == cont && |
2f8600dff [SCSI] eliminate ... |
1358 |
rphy->identify.device_type == SAS_END_DEVICE; |
42ab03609 [PATCH] convert a... |
1359 |
} |
79cb1819e [SCSI] add prelim... |
1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 |
static int sas_expander_match(struct attribute_container *cont, struct device *dev) { struct Scsi_Host *shost; struct sas_internal *i; struct sas_rphy *rphy; if (!scsi_is_sas_rphy(dev)) return 0; shost = dev_to_shost(dev->parent->parent); rphy = dev_to_rphy(dev); if (!shost->transportt) return 0; if (shost->transportt->host_attrs.ac.class != &sas_host_class.class) return 0; i = to_sas_internal(shost->transportt); return &i->expander_attr_cont.ac == cont && (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE || |
2f8600dff [SCSI] eliminate ... |
1381 |
rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE); |
79cb1819e [SCSI] add prelim... |
1382 |
} |
2f8600dff [SCSI] eliminate ... |
1383 |
static void sas_expander_release(struct device *dev) |
c7ebbbce3 [SCSI] SAS transp... |
1384 1385 |
{ struct sas_rphy *rphy = dev_to_rphy(dev); |
2f8600dff [SCSI] eliminate ... |
1386 |
struct sas_expander_device *edev = rphy_to_expander_device(rphy); |
c7ebbbce3 [SCSI] SAS transp... |
1387 |
|
93c20a59a [SCSI] scsi_trans... |
1388 1389 |
if (rphy->q) blk_cleanup_queue(rphy->q); |
c7ebbbce3 [SCSI] SAS transp... |
1390 |
put_device(dev->parent); |
2f8600dff [SCSI] eliminate ... |
1391 |
kfree(edev); |
c7ebbbce3 [SCSI] SAS transp... |
1392 |
} |
2f8600dff [SCSI] eliminate ... |
1393 |
static void sas_end_device_release(struct device *dev) |
c7ebbbce3 [SCSI] SAS transp... |
1394 |
{ |
2f8600dff [SCSI] eliminate ... |
1395 1396 |
struct sas_rphy *rphy = dev_to_rphy(dev); struct sas_end_device *edev = rphy_to_end_device(rphy); |
c7ebbbce3 [SCSI] SAS transp... |
1397 |
|
93c20a59a [SCSI] scsi_trans... |
1398 1399 |
if (rphy->q) blk_cleanup_queue(rphy->q); |
2f8600dff [SCSI] eliminate ... |
1400 1401 |
put_device(dev->parent); kfree(edev); |
c7ebbbce3 [SCSI] SAS transp... |
1402 |
} |
c7ebbbce3 [SCSI] SAS transp... |
1403 1404 |
/** |
c5943d36a [SCSI] scsi_trans... |
1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 |
* sas_rphy_initialize - common rphy intialization * @rphy: rphy to initialise * * Used by both sas_end_device_alloc() and sas_expander_alloc() to * initialise the common rphy component of each. */ static void sas_rphy_initialize(struct sas_rphy *rphy) { INIT_LIST_HEAD(&rphy->list); } /** |
42ab03609 [PATCH] convert a... |
1417 |
* sas_end_device_alloc - allocate an rphy for an end device |
eb44820c2 [SCSI] Add Docume... |
1418 |
* @parent: which port |
42ab03609 [PATCH] convert a... |
1419 1420 1421 1422 1423 1424 |
* * Allocates an SAS remote PHY structure, connected to @parent. * * Returns: * SAS PHY allocated or %NULL if the allocation failed. */ |
65c92b09a [SCSI] scsi_trans... |
1425 |
struct sas_rphy *sas_end_device_alloc(struct sas_port *parent) |
42ab03609 [PATCH] convert a... |
1426 1427 1428 1429 1430 1431 |
{ struct Scsi_Host *shost = dev_to_shost(&parent->dev); struct sas_end_device *rdev; rdev = kzalloc(sizeof(*rdev), GFP_KERNEL); if (!rdev) { |
42ab03609 [PATCH] convert a... |
1432 1433 1434 1435 1436 |
return NULL; } device_initialize(&rdev->rphy.dev); rdev->rphy.dev.parent = get_device(&parent->dev); |
2f8600dff [SCSI] eliminate ... |
1437 |
rdev->rphy.dev.release = sas_end_device_release; |
65c92b09a [SCSI] scsi_trans... |
1438 1439 |
if (scsi_is_sas_expander_device(parent->dev.parent)) { struct sas_rphy *rphy = dev_to_rphy(parent->dev.parent); |
71610f55f [SCSI] struct dev... |
1440 1441 1442 |
dev_set_name(&rdev->rphy.dev, "end_device-%d:%d:%d", shost->host_no, rphy->scsi_target_id, parent->port_identifier); |
65c92b09a [SCSI] scsi_trans... |
1443 |
} else |
71610f55f [SCSI] struct dev... |
1444 1445 |
dev_set_name(&rdev->rphy.dev, "end_device-%d:%d", shost->host_no, parent->port_identifier); |
42ab03609 [PATCH] convert a... |
1446 |
rdev->rphy.identify.device_type = SAS_END_DEVICE; |
c5943d36a [SCSI] scsi_trans... |
1447 |
sas_rphy_initialize(&rdev->rphy); |
42ab03609 [PATCH] convert a... |
1448 1449 1450 1451 1452 |
transport_setup_device(&rdev->rphy.dev); return &rdev->rphy; } EXPORT_SYMBOL(sas_end_device_alloc); |
79cb1819e [SCSI] add prelim... |
1453 1454 |
/** * sas_expander_alloc - allocate an rphy for an end device |
eb44820c2 [SCSI] Add Docume... |
1455 1456 |
* @parent: which port * @type: SAS_EDGE_EXPANDER_DEVICE or SAS_FANOUT_EXPANDER_DEVICE |
79cb1819e [SCSI] add prelim... |
1457 1458 1459 1460 1461 1462 |
* * Allocates an SAS remote PHY structure, connected to @parent. * * Returns: * SAS PHY allocated or %NULL if the allocation failed. */ |
65c92b09a [SCSI] scsi_trans... |
1463 |
struct sas_rphy *sas_expander_alloc(struct sas_port *parent, |
79cb1819e [SCSI] add prelim... |
1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 |
enum sas_device_type type) { struct Scsi_Host *shost = dev_to_shost(&parent->dev); struct sas_expander_device *rdev; struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); BUG_ON(type != SAS_EDGE_EXPANDER_DEVICE && type != SAS_FANOUT_EXPANDER_DEVICE); rdev = kzalloc(sizeof(*rdev), GFP_KERNEL); if (!rdev) { |
79cb1819e [SCSI] add prelim... |
1475 1476 1477 1478 1479 |
return NULL; } device_initialize(&rdev->rphy.dev); rdev->rphy.dev.parent = get_device(&parent->dev); |
2f8600dff [SCSI] eliminate ... |
1480 |
rdev->rphy.dev.release = sas_expander_release; |
79cb1819e [SCSI] add prelim... |
1481 1482 1483 |
mutex_lock(&sas_host->lock); rdev->rphy.scsi_target_id = sas_host->next_expander_id++; mutex_unlock(&sas_host->lock); |
71610f55f [SCSI] struct dev... |
1484 1485 |
dev_set_name(&rdev->rphy.dev, "expander-%d:%d", shost->host_no, rdev->rphy.scsi_target_id); |
79cb1819e [SCSI] add prelim... |
1486 |
rdev->rphy.identify.device_type = type; |
c5943d36a [SCSI] scsi_trans... |
1487 |
sas_rphy_initialize(&rdev->rphy); |
79cb1819e [SCSI] add prelim... |
1488 1489 1490 1491 1492 |
transport_setup_device(&rdev->rphy.dev); return &rdev->rphy; } EXPORT_SYMBOL(sas_expander_alloc); |
42ab03609 [PATCH] convert a... |
1493 1494 |
/** |
eb44820c2 [SCSI] Add Docume... |
1495 |
* sas_rphy_add - add a SAS remote PHY to the device hierarchy |
c7ebbbce3 [SCSI] SAS transp... |
1496 1497 1498 1499 1500 1501 |
* @rphy: The remote PHY to be added * * Publishes a SAS remote PHY to the rest of the system. */ int sas_rphy_add(struct sas_rphy *rphy) { |
65c92b09a [SCSI] scsi_trans... |
1502 |
struct sas_port *parent = dev_to_sas_port(rphy->dev.parent); |
c7ebbbce3 [SCSI] SAS transp... |
1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 |
struct Scsi_Host *shost = dev_to_shost(parent->dev.parent); struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); struct sas_identify *identify = &rphy->identify; int error; if (parent->rphy) return -ENXIO; parent->rphy = rphy; error = device_add(&rphy->dev); if (error) return error; transport_add_device(&rphy->dev); transport_configure_device(&rphy->dev); |
39dca558a [SCSI] bsg: make ... |
1517 |
if (sas_bsg_initialize(shost, rphy)) |
71610f55f [SCSI] struct dev... |
1518 1519 |
printk("fail to a bsg device %s ", dev_name(&rphy->dev)); |
39dca558a [SCSI] bsg: make ... |
1520 |
|
c7ebbbce3 [SCSI] SAS transp... |
1521 |
|
e02f3f592 [SCSI] remove tar... |
1522 |
mutex_lock(&sas_host->lock); |
c7ebbbce3 [SCSI] SAS transp... |
1523 1524 1525 1526 1527 |
list_add_tail(&rphy->list, &sas_host->rphy_list); if (identify->device_type == SAS_END_DEVICE && (identify->target_port_protocols & (SAS_PROTOCOL_SSP|SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA))) rphy->scsi_target_id = sas_host->next_target_id++; |
7676f83ae [SCSI] scsi_trans... |
1528 1529 |
else if (identify->device_type == SAS_END_DEVICE) rphy->scsi_target_id = -1; |
e02f3f592 [SCSI] remove tar... |
1530 |
mutex_unlock(&sas_host->lock); |
c7ebbbce3 [SCSI] SAS transp... |
1531 |
|
79cb1819e [SCSI] add prelim... |
1532 1533 |
if (identify->device_type == SAS_END_DEVICE && rphy->scsi_target_id != -1) { |
e8bf39417 [SCSI] scsi_trans... |
1534 |
scsi_scan_target(&rphy->dev, 0, |
c8490f3a7 [SCSI] libsas: Us... |
1535 |
rphy->scsi_target_id, SCAN_WILD_CARD, 0); |
c7ebbbce3 [SCSI] SAS transp... |
1536 1537 1538 1539 1540 1541 1542 |
} return 0; } EXPORT_SYMBOL(sas_rphy_add); /** |
eb44820c2 [SCSI] Add Docume... |
1543 1544 |
* sas_rphy_free - free a SAS remote PHY * @rphy: SAS remote PHY to free |
c7ebbbce3 [SCSI] SAS transp... |
1545 1546 1547 1548 1549 |
* * Frees the specified SAS remote PHY. * * Note: * This function must only be called on a remote |
af901ca18 tree-wide: fix as... |
1550 |
* PHY that has not successfully been added using |
6f63caae2 [SCSI] libsas: Cl... |
1551 |
* sas_rphy_add() (or has been sas_rphy_remove()'d) |
c7ebbbce3 [SCSI] SAS transp... |
1552 1553 1554 |
*/ void sas_rphy_free(struct sas_rphy *rphy) { |
92aab6464 [SCSI] sas transp... |
1555 |
struct device *dev = &rphy->dev; |
c7ebbbce3 [SCSI] SAS transp... |
1556 1557 |
struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); |
e02f3f592 [SCSI] remove tar... |
1558 |
mutex_lock(&sas_host->lock); |
c7ebbbce3 [SCSI] SAS transp... |
1559 |
list_del(&rphy->list); |
e02f3f592 [SCSI] remove tar... |
1560 |
mutex_unlock(&sas_host->lock); |
c7ebbbce3 [SCSI] SAS transp... |
1561 |
|
b6aff6695 [SCSI] scsi_trans... |
1562 |
sas_bsg_remove(shost, rphy); |
92aab6464 [SCSI] sas transp... |
1563 |
transport_destroy_device(dev); |
2f8600dff [SCSI] eliminate ... |
1564 |
|
92aab6464 [SCSI] sas transp... |
1565 |
put_device(dev); |
c7ebbbce3 [SCSI] SAS transp... |
1566 1567 1568 1569 |
} EXPORT_SYMBOL(sas_rphy_free); /** |
eb44820c2 [SCSI] Add Docume... |
1570 |
* sas_rphy_delete - remove and free SAS remote PHY |
6f63caae2 [SCSI] libsas: Cl... |
1571 |
* @rphy: SAS remote PHY to remove and free |
c7ebbbce3 [SCSI] SAS transp... |
1572 |
* |
6f63caae2 [SCSI] libsas: Cl... |
1573 |
* Removes the specified SAS remote PHY and frees it. |
c7ebbbce3 [SCSI] SAS transp... |
1574 1575 1576 1577 |
*/ void sas_rphy_delete(struct sas_rphy *rphy) { |
6f63caae2 [SCSI] libsas: Cl... |
1578 1579 1580 1581 1582 1583 |
sas_rphy_remove(rphy); sas_rphy_free(rphy); } EXPORT_SYMBOL(sas_rphy_delete); /** |
eb44820c2 [SCSI] Add Docume... |
1584 |
* sas_rphy_remove - remove SAS remote PHY |
6f63caae2 [SCSI] libsas: Cl... |
1585 1586 1587 1588 1589 1590 1591 |
* @rphy: SAS remote phy to remove * * Removes the specified SAS remote PHY. */ void sas_rphy_remove(struct sas_rphy *rphy) { |
c7ebbbce3 [SCSI] SAS transp... |
1592 |
struct device *dev = &rphy->dev; |
65c92b09a [SCSI] scsi_trans... |
1593 |
struct sas_port *parent = dev_to_sas_port(dev->parent); |
c7ebbbce3 [SCSI] SAS transp... |
1594 |
|
d40542399 [SCSI] sas: fix r... |
1595 1596 1597 1598 1599 1600 |
switch (rphy->identify.device_type) { case SAS_END_DEVICE: scsi_remove_target(dev); break; case SAS_EDGE_EXPANDER_DEVICE: case SAS_FANOUT_EXPANDER_DEVICE: |
65c92b09a [SCSI] scsi_trans... |
1601 |
sas_remove_children(dev); |
d40542399 [SCSI] sas: fix r... |
1602 1603 1604 1605 |
break; default: break; } |
c7ebbbce3 [SCSI] SAS transp... |
1606 |
|
fe8b2304e [SCSI] sas: fix r... |
1607 1608 |
transport_remove_device(dev); device_del(dev); |
c7ebbbce3 [SCSI] SAS transp... |
1609 |
|
33b114e93 [SCSI] sas: clear... |
1610 |
parent->rphy = NULL; |
c7ebbbce3 [SCSI] SAS transp... |
1611 |
} |
6f63caae2 [SCSI] libsas: Cl... |
1612 |
EXPORT_SYMBOL(sas_rphy_remove); |
c7ebbbce3 [SCSI] SAS transp... |
1613 1614 |
/** |
eb44820c2 [SCSI] Add Docume... |
1615 |
* scsi_is_sas_rphy - check if a struct device represents a SAS remote PHY |
c7ebbbce3 [SCSI] SAS transp... |
1616 1617 1618 1619 1620 1621 1622 |
* @dev: device to check * * Returns: * %1 if the device represents a SAS remote PHY, %0 else */ int scsi_is_sas_rphy(const struct device *dev) { |
2f8600dff [SCSI] eliminate ... |
1623 1624 |
return dev->release == sas_end_device_release || dev->release == sas_expander_release; |
c7ebbbce3 [SCSI] SAS transp... |
1625 1626 1627 1628 1629 1630 1631 |
} EXPORT_SYMBOL(scsi_is_sas_rphy); /* * SCSI scan helper */ |
e02f3f592 [SCSI] remove tar... |
1632 1633 |
static int sas_user_scan(struct Scsi_Host *shost, uint channel, uint id, uint lun) |
c7ebbbce3 [SCSI] SAS transp... |
1634 1635 1636 |
{ struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); struct sas_rphy *rphy; |
c7ebbbce3 [SCSI] SAS transp... |
1637 |
|
e02f3f592 [SCSI] remove tar... |
1638 |
mutex_lock(&sas_host->lock); |
c7ebbbce3 [SCSI] SAS transp... |
1639 |
list_for_each_entry(rphy, &sas_host->rphy_list, list) { |
6d99a3f37 [SCSI] scsi_trans... |
1640 1641 |
if (rphy->identify.device_type != SAS_END_DEVICE || rphy->scsi_target_id == -1) |
e02f3f592 [SCSI] remove tar... |
1642 |
continue; |
e8bf39417 [SCSI] scsi_trans... |
1643 |
if ((channel == SCAN_WILD_CARD || channel == 0) && |
e02f3f592 [SCSI] remove tar... |
1644 |
(id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) { |
e8bf39417 [SCSI] scsi_trans... |
1645 |
scsi_scan_target(&rphy->dev, 0, |
e02f3f592 [SCSI] remove tar... |
1646 1647 |
rphy->scsi_target_id, lun, 1); } |
c7ebbbce3 [SCSI] SAS transp... |
1648 |
} |
e02f3f592 [SCSI] remove tar... |
1649 |
mutex_unlock(&sas_host->lock); |
c7ebbbce3 [SCSI] SAS transp... |
1650 |
|
e02f3f592 [SCSI] remove tar... |
1651 |
return 0; |
c7ebbbce3 [SCSI] SAS transp... |
1652 1653 1654 1655 1656 1657 |
} /* * Setup / Teardown code */ |
d24e1eeb3 [SCSI] scsi_trans... |
1658 |
#define SETUP_TEMPLATE(attrb, field, perm, test) \ |
ee959b00c SCSI: convert str... |
1659 |
i->private_##attrb[count] = dev_attr_##field; \ |
42ab03609 [PATCH] convert a... |
1660 |
i->private_##attrb[count].attr.mode = perm; \ |
42ab03609 [PATCH] convert a... |
1661 1662 1663 |
i->attrb[count] = &i->private_##attrb[count]; \ if (test) \ count++ |
d24e1eeb3 [SCSI] scsi_trans... |
1664 |
#define SETUP_TEMPLATE_RW(attrb, field, perm, test, ro_test, ro_perm) \ |
ee959b00c SCSI: convert str... |
1665 |
i->private_##attrb[count] = dev_attr_##field; \ |
d24e1eeb3 [SCSI] scsi_trans... |
1666 1667 1668 1669 1670 1671 1672 1673 |
i->private_##attrb[count].attr.mode = perm; \ if (ro_test) { \ i->private_##attrb[count].attr.mode = ro_perm; \ i->private_##attrb[count].store = NULL; \ } \ i->attrb[count] = &i->private_##attrb[count]; \ if (test) \ count++ |
42ab03609 [PATCH] convert a... |
1674 1675 1676 |
#define SETUP_RPORT_ATTRIBUTE(field) \ SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, 1) |
c7ebbbce3 [SCSI] SAS transp... |
1677 |
|
dd9fbb521 [SCSI] make some ... |
1678 |
#define SETUP_OPTIONAL_RPORT_ATTRIBUTE(field, func) \ |
42ab03609 [PATCH] convert a... |
1679 |
SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, i->f->func) |
dd9fbb521 [SCSI] make some ... |
1680 |
|
65c92b09a [SCSI] scsi_trans... |
1681 |
#define SETUP_PHY_ATTRIBUTE(field) \ |
42ab03609 [PATCH] convert a... |
1682 |
SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, 1) |
c7ebbbce3 [SCSI] SAS transp... |
1683 |
|
d24e1eeb3 [SCSI] scsi_trans... |
1684 1685 1686 |
#define SETUP_PHY_ATTRIBUTE_RW(field) \ SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \ !i->f->set_phy_speed, S_IRUGO) |
acbf167d4 [SCSI] libsas: Ad... |
1687 1688 1689 |
#define SETUP_OPTIONAL_PHY_ATTRIBUTE_RW(field, func) \ SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \ !i->f->func, S_IRUGO) |
65c92b09a [SCSI] scsi_trans... |
1690 1691 1692 1693 |
#define SETUP_PORT_ATTRIBUTE(field) \ SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1) #define SETUP_OPTIONAL_PHY_ATTRIBUTE(field, func) \ |
42ab03609 [PATCH] convert a... |
1694 |
SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, i->f->func) |
dd9fbb521 [SCSI] make some ... |
1695 |
|
65c92b09a [SCSI] scsi_trans... |
1696 |
#define SETUP_PHY_ATTRIBUTE_WRONLY(field) \ |
fe3b5bfe7 [SCSI] libsas: sy... |
1697 |
SETUP_TEMPLATE(phy_attrs, field, S_IWUSR, 1) |
07ba3a954 [SCSI] sas: add s... |
1698 |
|
65c92b09a [SCSI] scsi_trans... |
1699 |
#define SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(field, func) \ |
fe3b5bfe7 [SCSI] libsas: sy... |
1700 |
SETUP_TEMPLATE(phy_attrs, field, S_IWUSR, i->f->func) |
dd9fbb521 [SCSI] make some ... |
1701 |
|
42ab03609 [PATCH] convert a... |
1702 1703 |
#define SETUP_END_DEV_ATTRIBUTE(field) \ SETUP_TEMPLATE(end_dev_attrs, field, S_IRUGO, 1) |
c7ebbbce3 [SCSI] SAS transp... |
1704 |
|
79cb1819e [SCSI] add prelim... |
1705 1706 |
#define SETUP_EXPANDER_ATTRIBUTE(field) \ SETUP_TEMPLATE(expander_attrs, expander_##field, S_IRUGO, 1) |
c7ebbbce3 [SCSI] SAS transp... |
1707 |
/** |
eb44820c2 [SCSI] Add Docume... |
1708 |
* sas_attach_transport - instantiate SAS transport template |
c7ebbbce3 [SCSI] SAS transp... |
1709 1710 1711 1712 1713 1714 1715 |
* @ft: SAS transport class function template */ struct scsi_transport_template * sas_attach_transport(struct sas_function_template *ft) { struct sas_internal *i; int count; |
24669f75a [SCSI] SCSI core ... |
1716 |
i = kzalloc(sizeof(struct sas_internal), GFP_KERNEL); |
c7ebbbce3 [SCSI] SAS transp... |
1717 1718 |
if (!i) return NULL; |
c7ebbbce3 [SCSI] SAS transp... |
1719 |
|
e02f3f592 [SCSI] remove tar... |
1720 |
i->t.user_scan = sas_user_scan; |
c7ebbbce3 [SCSI] SAS transp... |
1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 |
i->t.host_attrs.ac.attrs = &i->host_attrs[0]; i->t.host_attrs.ac.class = &sas_host_class.class; i->t.host_attrs.ac.match = sas_host_match; transport_container_register(&i->t.host_attrs); i->t.host_size = sizeof(struct sas_host_attrs); i->phy_attr_cont.ac.class = &sas_phy_class.class; i->phy_attr_cont.ac.attrs = &i->phy_attrs[0]; i->phy_attr_cont.ac.match = sas_phy_match; transport_container_register(&i->phy_attr_cont); |
65c92b09a [SCSI] scsi_trans... |
1732 1733 1734 1735 |
i->port_attr_cont.ac.class = &sas_port_class.class; i->port_attr_cont.ac.attrs = &i->port_attrs[0]; i->port_attr_cont.ac.match = sas_port_match; transport_container_register(&i->port_attr_cont); |
c7ebbbce3 [SCSI] SAS transp... |
1736 1737 1738 1739 |
i->rphy_attr_cont.ac.class = &sas_rphy_class.class; i->rphy_attr_cont.ac.attrs = &i->rphy_attrs[0]; i->rphy_attr_cont.ac.match = sas_rphy_match; transport_container_register(&i->rphy_attr_cont); |
42ab03609 [PATCH] convert a... |
1740 1741 1742 1743 |
i->end_dev_attr_cont.ac.class = &sas_end_dev_class.class; i->end_dev_attr_cont.ac.attrs = &i->end_dev_attrs[0]; i->end_dev_attr_cont.ac.match = sas_end_dev_match; transport_container_register(&i->end_dev_attr_cont); |
79cb1819e [SCSI] add prelim... |
1744 1745 1746 1747 |
i->expander_attr_cont.ac.class = &sas_expander_class.class; i->expander_attr_cont.ac.attrs = &i->expander_attrs[0]; i->expander_attr_cont.ac.match = sas_expander_match; transport_container_register(&i->expander_attr_cont); |
c7ebbbce3 [SCSI] SAS transp... |
1748 1749 1750 |
i->f = ft; count = 0; |
65c92b09a [SCSI] scsi_trans... |
1751 1752 1753 1754 1755 1756 1757 1758 |
SETUP_PHY_ATTRIBUTE(initiator_port_protocols); SETUP_PHY_ATTRIBUTE(target_port_protocols); SETUP_PHY_ATTRIBUTE(device_type); SETUP_PHY_ATTRIBUTE(sas_address); SETUP_PHY_ATTRIBUTE(phy_identifier); //SETUP_PHY_ATTRIBUTE(port_identifier); SETUP_PHY_ATTRIBUTE(negotiated_linkrate); SETUP_PHY_ATTRIBUTE(minimum_linkrate_hw); |
d24e1eeb3 [SCSI] scsi_trans... |
1759 |
SETUP_PHY_ATTRIBUTE_RW(minimum_linkrate); |
65c92b09a [SCSI] scsi_trans... |
1760 |
SETUP_PHY_ATTRIBUTE(maximum_linkrate_hw); |
d24e1eeb3 [SCSI] scsi_trans... |
1761 |
SETUP_PHY_ATTRIBUTE_RW(maximum_linkrate); |
65c92b09a [SCSI] scsi_trans... |
1762 1763 1764 1765 1766 1767 1768 |
SETUP_PHY_ATTRIBUTE(invalid_dword_count); SETUP_PHY_ATTRIBUTE(running_disparity_error_count); SETUP_PHY_ATTRIBUTE(loss_of_dword_sync_count); SETUP_PHY_ATTRIBUTE(phy_reset_problem_count); SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(link_reset, phy_reset); SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(hard_reset, phy_reset); |
acbf167d4 [SCSI] libsas: Ad... |
1769 |
SETUP_OPTIONAL_PHY_ATTRIBUTE_RW(enable, phy_enable); |
c7ebbbce3 [SCSI] SAS transp... |
1770 1771 1772 |
i->phy_attrs[count] = NULL; count = 0; |
65c92b09a [SCSI] scsi_trans... |
1773 1774 1775 1776 |
SETUP_PORT_ATTRIBUTE(num_phys); i->port_attrs[count] = NULL; count = 0; |
c7ebbbce3 [SCSI] SAS transp... |
1777 1778 1779 1780 1781 |
SETUP_RPORT_ATTRIBUTE(rphy_initiator_port_protocols); SETUP_RPORT_ATTRIBUTE(rphy_target_port_protocols); SETUP_RPORT_ATTRIBUTE(rphy_device_type); SETUP_RPORT_ATTRIBUTE(rphy_sas_address); SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier); |
dd9fbb521 [SCSI] make some ... |
1782 1783 1784 1785 |
SETUP_OPTIONAL_RPORT_ATTRIBUTE(rphy_enclosure_identifier, get_enclosure_identifier); SETUP_OPTIONAL_RPORT_ATTRIBUTE(rphy_bay_identifier, get_bay_identifier); |
c7ebbbce3 [SCSI] SAS transp... |
1786 |
i->rphy_attrs[count] = NULL; |
42ab03609 [PATCH] convert a... |
1787 1788 1789 1790 |
count = 0; SETUP_END_DEV_ATTRIBUTE(end_dev_ready_led_meaning); SETUP_END_DEV_ATTRIBUTE(end_dev_I_T_nexus_loss_timeout); SETUP_END_DEV_ATTRIBUTE(end_dev_initiator_response_timeout); |
0f88009d5 [SCSI] scsi_trans... |
1791 1792 |
SETUP_END_DEV_ATTRIBUTE(end_dev_tlr_supported); SETUP_END_DEV_ATTRIBUTE(end_dev_tlr_enabled); |
42ab03609 [PATCH] convert a... |
1793 |
i->end_dev_attrs[count] = NULL; |
79cb1819e [SCSI] add prelim... |
1794 1795 1796 1797 1798 1799 1800 1801 1802 |
count = 0; SETUP_EXPANDER_ATTRIBUTE(vendor_id); SETUP_EXPANDER_ATTRIBUTE(product_id); SETUP_EXPANDER_ATTRIBUTE(product_rev); SETUP_EXPANDER_ATTRIBUTE(component_vendor_id); SETUP_EXPANDER_ATTRIBUTE(component_id); SETUP_EXPANDER_ATTRIBUTE(component_revision_id); SETUP_EXPANDER_ATTRIBUTE(level); i->expander_attrs[count] = NULL; |
c7ebbbce3 [SCSI] SAS transp... |
1803 1804 1805 1806 1807 |
return &i->t; } EXPORT_SYMBOL(sas_attach_transport); /** |
eb44820c2 [SCSI] Add Docume... |
1808 |
* sas_release_transport - release SAS transport template instance |
c7ebbbce3 [SCSI] SAS transp... |
1809 1810 1811 1812 1813 1814 1815 1816 |
* @t: transport template instance */ void sas_release_transport(struct scsi_transport_template *t) { struct sas_internal *i = to_sas_internal(t); transport_container_unregister(&i->t.host_attrs); transport_container_unregister(&i->phy_attr_cont); |
65c92b09a [SCSI] scsi_trans... |
1817 |
transport_container_unregister(&i->port_attr_cont); |
c7ebbbce3 [SCSI] SAS transp... |
1818 |
transport_container_unregister(&i->rphy_attr_cont); |
db82f8410 [SCSI] add missin... |
1819 |
transport_container_unregister(&i->end_dev_attr_cont); |
79cb1819e [SCSI] add prelim... |
1820 |
transport_container_unregister(&i->expander_attr_cont); |
c7ebbbce3 [SCSI] SAS transp... |
1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 |
kfree(i); } EXPORT_SYMBOL(sas_release_transport); static __init int sas_transport_init(void) { int error; error = transport_class_register(&sas_host_class); if (error) goto out; error = transport_class_register(&sas_phy_class); if (error) goto out_unregister_transport; |
65c92b09a [SCSI] scsi_trans... |
1836 |
error = transport_class_register(&sas_port_class); |
c7ebbbce3 [SCSI] SAS transp... |
1837 1838 |
if (error) goto out_unregister_phy; |
65c92b09a [SCSI] scsi_trans... |
1839 1840 1841 |
error = transport_class_register(&sas_rphy_class); if (error) goto out_unregister_port; |
42ab03609 [PATCH] convert a... |
1842 1843 1844 |
error = transport_class_register(&sas_end_dev_class); if (error) goto out_unregister_rphy; |
79cb1819e [SCSI] add prelim... |
1845 1846 1847 |
error = transport_class_register(&sas_expander_class); if (error) goto out_unregister_end_dev; |
c7ebbbce3 [SCSI] SAS transp... |
1848 1849 |
return 0; |
79cb1819e [SCSI] add prelim... |
1850 1851 |
out_unregister_end_dev: transport_class_unregister(&sas_end_dev_class); |
42ab03609 [PATCH] convert a... |
1852 1853 |
out_unregister_rphy: transport_class_unregister(&sas_rphy_class); |
65c92b09a [SCSI] scsi_trans... |
1854 1855 |
out_unregister_port: transport_class_unregister(&sas_port_class); |
c7ebbbce3 [SCSI] SAS transp... |
1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 |
out_unregister_phy: transport_class_unregister(&sas_phy_class); out_unregister_transport: transport_class_unregister(&sas_host_class); out: return error; } static void __exit sas_transport_exit(void) { transport_class_unregister(&sas_host_class); transport_class_unregister(&sas_phy_class); |
65c92b09a [SCSI] scsi_trans... |
1869 |
transport_class_unregister(&sas_port_class); |
c7ebbbce3 [SCSI] SAS transp... |
1870 |
transport_class_unregister(&sas_rphy_class); |
42ab03609 [PATCH] convert a... |
1871 |
transport_class_unregister(&sas_end_dev_class); |
79cb1819e [SCSI] add prelim... |
1872 |
transport_class_unregister(&sas_expander_class); |
c7ebbbce3 [SCSI] SAS transp... |
1873 1874 1875 |
} MODULE_AUTHOR("Christoph Hellwig"); |
86b9c4c16 [SCSI] aic94xx: f... |
1876 |
MODULE_DESCRIPTION("SAS Transport Attributes"); |
c7ebbbce3 [SCSI] SAS transp... |
1877 1878 1879 1880 |
MODULE_LICENSE("GPL"); module_init(sas_transport_init); module_exit(sas_transport_exit); |