Blame view
drivers/ata/sata_vsc.c
12.3 KB
1da177e4c Linux-2.6.12-rc2 |
1 2 3 4 5 6 7 8 9 10 11 |
/* * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA * * Maintained by: Jeremy Higdon @ SGI * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * * Copyright 2004 SGI * * Bits from Jeff Garzik, Copyright RedHat, Inc. * |
af36d7f0d [libata] license ... |
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 |
* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * * libata documentation is available via 'make {ps|pdf}docs', * as Documentation/DocBook/libata.* * * Vitesse hardware documentation presumably available under NDA. * Intel 31244 (same hardware interface) documentation presumably * available from http://developer.intel.com/ * |
1da177e4c Linux-2.6.12-rc2 |
35 36 37 38 39 40 41 42 43 |
*/ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> |
7003c05d7 [PATCH] drivers/s... |
44 |
#include <linux/dma-mapping.h> |
a9524a76f [libata] use dev_... |
45 |
#include <linux/device.h> |
1da177e4c Linux-2.6.12-rc2 |
46 47 48 49 |
#include <scsi/scsi_host.h> #include <linux/libata.h> #define DRV_NAME "sata_vsc" |
2a3103ce4 [libata] Bump dri... |
50 |
#define DRV_VERSION "2.3" |
1da177e4c Linux-2.6.12-rc2 |
51 |
|
55cca65e1 [libata sata_vsc,... |
52 |
enum { |
0d5ff5667 libata: convert t... |
53 |
VSC_MMIO_BAR = 0, |
55cca65e1 [libata sata_vsc,... |
54 55 56 |
/* Interrupt register offsets (from chip base address) */ VSC_SATA_INT_STAT_OFFSET = 0x00, VSC_SATA_INT_MASK_OFFSET = 0x04, |
1da177e4c Linux-2.6.12-rc2 |
57 |
|
55cca65e1 [libata sata_vsc,... |
58 59 60 61 62 63 64 65 66 67 68 69 70 71 |
/* Taskfile registers offsets */ VSC_SATA_TF_CMD_OFFSET = 0x00, VSC_SATA_TF_DATA_OFFSET = 0x00, VSC_SATA_TF_ERROR_OFFSET = 0x04, VSC_SATA_TF_FEATURE_OFFSET = 0x06, VSC_SATA_TF_NSECT_OFFSET = 0x08, VSC_SATA_TF_LBAL_OFFSET = 0x0c, VSC_SATA_TF_LBAM_OFFSET = 0x10, VSC_SATA_TF_LBAH_OFFSET = 0x14, VSC_SATA_TF_DEVICE_OFFSET = 0x18, VSC_SATA_TF_STATUS_OFFSET = 0x1c, VSC_SATA_TF_COMMAND_OFFSET = 0x1d, VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28, VSC_SATA_TF_CTL_OFFSET = 0x29, |
1da177e4c Linux-2.6.12-rc2 |
72 |
|
55cca65e1 [libata sata_vsc,... |
73 74 75 76 |
/* DMA base */ VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64, VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C, VSC_SATA_DMA_CMD_OFFSET = 0x70, |
1da177e4c Linux-2.6.12-rc2 |
77 |
|
55cca65e1 [libata sata_vsc,... |
78 79 80 81 |
/* SCRs base */ VSC_SATA_SCR_STATUS_OFFSET = 0x100, VSC_SATA_SCR_ERROR_OFFSET = 0x104, VSC_SATA_SCR_CONTROL_OFFSET = 0x108, |
1da177e4c Linux-2.6.12-rc2 |
82 |
|
55cca65e1 [libata sata_vsc,... |
83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 |
/* Port stride */ VSC_SATA_PORT_OFFSET = 0x200, /* Error interrupt status bit offsets */ VSC_SATA_INT_ERROR_CRC = 0x40, VSC_SATA_INT_ERROR_T = 0x20, VSC_SATA_INT_ERROR_P = 0x10, VSC_SATA_INT_ERROR_R = 0x8, VSC_SATA_INT_ERROR_E = 0x4, VSC_SATA_INT_ERROR_M = 0x2, VSC_SATA_INT_PHY_CHANGE = 0x1, VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \ VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \ VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \ VSC_SATA_INT_PHY_CHANGE), |
7cbaa86b9 [libata] sata_vsc... |
98 |
}; |
c962990a3 [libata] sata_vsc... |
99 |
|
82ef04fb4 libata: make SCR ... |
100 101 |
static int vsc_sata_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) |
1da177e4c Linux-2.6.12-rc2 |
102 103 |
{ if (sc_reg > SCR_CONTROL) |
da3dbb17a libata: make ->sc... |
104 |
return -EINVAL; |
82ef04fb4 libata: make SCR ... |
105 |
*val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4)); |
da3dbb17a libata: make ->sc... |
106 |
return 0; |
1da177e4c Linux-2.6.12-rc2 |
107 |
} |
82ef04fb4 libata: make SCR ... |
108 109 |
static int vsc_sata_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) |
1da177e4c Linux-2.6.12-rc2 |
110 111 |
{ if (sc_reg > SCR_CONTROL) |
da3dbb17a libata: make ->sc... |
112 |
return -EINVAL; |
82ef04fb4 libata: make SCR ... |
113 |
writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); |
da3dbb17a libata: make ->sc... |
114 |
return 0; |
1da177e4c Linux-2.6.12-rc2 |
115 |
} |
ea34e45a4 sata_vsc: refacto... |
116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 |
static void vsc_freeze(struct ata_port *ap) { void __iomem *mask_addr; mask_addr = ap->host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_MASK_OFFSET + ap->port_no; writeb(0, mask_addr); } static void vsc_thaw(struct ata_port *ap) { void __iomem *mask_addr; mask_addr = ap->host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_MASK_OFFSET + ap->port_no; writeb(0xff, mask_addr); } |
1da177e4c Linux-2.6.12-rc2 |
136 137 |
static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) { |
307e4dc28 [PATCH] iomem ann... |
138 |
void __iomem *mask_addr; |
1da177e4c Linux-2.6.12-rc2 |
139 |
u8 mask; |
0d5ff5667 libata: convert t... |
140 |
mask_addr = ap->host->iomap[VSC_MMIO_BAR] + |
1da177e4c Linux-2.6.12-rc2 |
141 142 143 144 145 146 147 148 |
VSC_SATA_INT_MASK_OFFSET + ap->port_no; mask = readb(mask_addr); if (ctl & ATA_NIEN) mask |= 0x80; else mask &= 0x7F; writeb(mask, mask_addr); } |
057ace5e7 libata: const-ifi... |
149 |
static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) |
1da177e4c Linux-2.6.12-rc2 |
150 151 152 153 154 155 156 |
{ struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; /* * The only thing the ctl register is used for is SRST. * That is not enabled or disabled via tf_load. |
5796d1c4c [libata] Address ... |
157 158 |
* However, if ATA_NIEN is changed, then we need to change * the interrupt register. |
1da177e4c Linux-2.6.12-rc2 |
159 160 161 162 163 164 |
*/ if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) { ap->last_ctl = tf->ctl; vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN); } if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { |
850a9d8a8 [libata] sata_svw... |
165 |
writew(tf->feature | (((u16)tf->hob_feature) << 8), |
0d5ff5667 libata: convert t... |
166 |
ioaddr->feature_addr); |
850a9d8a8 [libata] sata_svw... |
167 |
writew(tf->nsect | (((u16)tf->hob_nsect) << 8), |
0d5ff5667 libata: convert t... |
168 |
ioaddr->nsect_addr); |
850a9d8a8 [libata] sata_svw... |
169 |
writew(tf->lbal | (((u16)tf->hob_lbal) << 8), |
0d5ff5667 libata: convert t... |
170 |
ioaddr->lbal_addr); |
850a9d8a8 [libata] sata_svw... |
171 |
writew(tf->lbam | (((u16)tf->hob_lbam) << 8), |
0d5ff5667 libata: convert t... |
172 |
ioaddr->lbam_addr); |
850a9d8a8 [libata] sata_svw... |
173 |
writew(tf->lbah | (((u16)tf->hob_lbah) << 8), |
0d5ff5667 libata: convert t... |
174 |
ioaddr->lbah_addr); |
1da177e4c Linux-2.6.12-rc2 |
175 |
} else if (is_addr) { |
0d5ff5667 libata: convert t... |
176 177 178 179 180 |
writew(tf->feature, ioaddr->feature_addr); writew(tf->nsect, ioaddr->nsect_addr); writew(tf->lbal, ioaddr->lbal_addr); writew(tf->lbam, ioaddr->lbam_addr); writew(tf->lbah, ioaddr->lbah_addr); |
1da177e4c Linux-2.6.12-rc2 |
181 182 183 |
} if (tf->flags & ATA_TFLAG_DEVICE) |
0d5ff5667 libata: convert t... |
184 |
writeb(tf->device, ioaddr->device_addr); |
1da177e4c Linux-2.6.12-rc2 |
185 186 187 188 189 190 191 192 |
ata_wait_idle(ap); } static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; |
ac19bff25 [libata] ensure -... |
193 |
u16 nsect, lbal, lbam, lbah, feature; |
1da177e4c Linux-2.6.12-rc2 |
194 |
|
9363c3825 libata: rename SF... |
195 |
tf->command = ata_sff_check_status(ap); |
0d5ff5667 libata: convert t... |
196 197 198 199 200 201 |
tf->device = readw(ioaddr->device_addr); feature = readw(ioaddr->error_addr); nsect = readw(ioaddr->nsect_addr); lbal = readw(ioaddr->lbal_addr); lbam = readw(ioaddr->lbam_addr); lbah = readw(ioaddr->lbah_addr); |
ac19bff25 [libata] ensure -... |
202 203 204 205 206 207 |
tf->feature = feature; tf->nsect = nsect; tf->lbal = lbal; tf->lbam = lbam; tf->lbah = lbah; |
1da177e4c Linux-2.6.12-rc2 |
208 209 |
if (tf->flags & ATA_TFLAG_LBA48) { |
ac19bff25 [libata] ensure -... |
210 |
tf->hob_feature = feature >> 8; |
1da177e4c Linux-2.6.12-rc2 |
211 212 213 214 |
tf->hob_nsect = nsect >> 8; tf->hob_lbal = lbal >> 8; tf->hob_lbam = lbam >> 8; tf->hob_lbah = lbah >> 8; |
5796d1c4c [libata] Address ... |
215 |
} |
1da177e4c Linux-2.6.12-rc2 |
216 |
} |
ea34e45a4 sata_vsc: refacto... |
217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 |
static inline void vsc_error_intr(u8 port_status, struct ata_port *ap) { if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M)) ata_port_freeze(ap); else ata_port_abort(ap); } static void vsc_port_intr(u8 port_status, struct ata_port *ap) { struct ata_queued_cmd *qc; int handled = 0; if (unlikely(port_status & VSC_SATA_INT_ERROR)) { vsc_error_intr(port_status, ap); return; } |
9af5c9c97 libata-link: intr... |
234 |
qc = ata_qc_from_tag(ap, ap->link.active_tag); |
ea34e45a4 sata_vsc: refacto... |
235 |
if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING))) |
c3b288942 libata-sff: separ... |
236 |
handled = ata_bmdma_port_intr(ap, qc); |
ea34e45a4 sata_vsc: refacto... |
237 238 239 240 241 242 243 |
/* We received an interrupt during a polled command, * or some other spurious condition. Interrupt reporting * with this hardware is fairly reliable so it is safe to * simply clear the interrupt */ if (unlikely(!handled)) |
5682ed33a libata: rename SF... |
244 |
ap->ops->sff_check_status(ap); |
ea34e45a4 sata_vsc: refacto... |
245 |
} |
1da177e4c Linux-2.6.12-rc2 |
246 247 248 249 |
/* * vsc_sata_interrupt * |
5796d1c4c [libata] Address ... |
250 251 |
* Read the interrupt register and process for the devices that have * them pending. |
1da177e4c Linux-2.6.12-rc2 |
252 |
*/ |
5796d1c4c [libata] Address ... |
253 |
static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance) |
1da177e4c Linux-2.6.12-rc2 |
254 |
{ |
cca3974e4 libata: Grand ren... |
255 |
struct ata_host *host = dev_instance; |
1da177e4c Linux-2.6.12-rc2 |
256 257 |
unsigned int i; unsigned int handled = 0; |
ea34e45a4 sata_vsc: refacto... |
258 |
u32 status; |
1da177e4c Linux-2.6.12-rc2 |
259 |
|
ea34e45a4 sata_vsc: refacto... |
260 |
status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET); |
1da177e4c Linux-2.6.12-rc2 |
261 |
|
ea34e45a4 sata_vsc: refacto... |
262 263 264 265 266 267 268 269 |
if (unlikely(status == 0xffffffff || status == 0)) { if (status) dev_printk(KERN_ERR, host->dev, ": IRQ status == 0xffffffff, " "PCI fault or device removal? "); goto out; } |
1da177e4c Linux-2.6.12-rc2 |
270 |
|
ea34e45a4 sata_vsc: refacto... |
271 |
spin_lock(&host->lock); |
2ae5b30ff [PATCH] Necessary... |
272 |
|
ea34e45a4 sata_vsc: refacto... |
273 274 275 |
for (i = 0; i < host->n_ports; i++) { u8 port_status = (status >> (8 * i)) & 0xff; if (port_status) { |
3e4ec3443 libata: kill ATA_... |
276 277 |
vsc_port_intr(port_status, host->ports[i]); handled++; |
1da177e4c Linux-2.6.12-rc2 |
278 279 |
} } |
cca3974e4 libata: Grand ren... |
280 |
spin_unlock(&host->lock); |
ea34e45a4 sata_vsc: refacto... |
281 |
out: |
1da177e4c Linux-2.6.12-rc2 |
282 283 |
return IRQ_RETVAL(handled); } |
193515d51 [libata] eliminat... |
284 |
static struct scsi_host_template vsc_sata_sht = { |
68d1d07b5 libata: implement... |
285 |
ATA_BMDMA_SHT(DRV_NAME), |
1da177e4c Linux-2.6.12-rc2 |
286 |
}; |
029cfd6b7 libata: implement... |
287 288 |
static struct ata_port_operations vsc_sata_ops = { .inherits = &ata_bmdma_port_ops, |
c96f1732e [libata] Improve ... |
289 290 291 |
/* The IRQ handling is not quite standard SFF behaviour so we cannot use the default lost interrupt handler */ .lost_interrupt = ATA_OP_NULL, |
5682ed33a libata: rename SF... |
292 293 |
.sff_tf_load = vsc_sata_tf_load, .sff_tf_read = vsc_sata_tf_read, |
ea34e45a4 sata_vsc: refacto... |
294 295 |
.freeze = vsc_freeze, .thaw = vsc_thaw, |
1da177e4c Linux-2.6.12-rc2 |
296 297 |
.scr_read = vsc_sata_scr_read, .scr_write = vsc_sata_scr_write, |
1da177e4c Linux-2.6.12-rc2 |
298 |
}; |
0d5ff5667 libata: convert t... |
299 300 |
static void __devinit vsc_sata_setup_port(struct ata_ioports *port, void __iomem *base) |
1da177e4c Linux-2.6.12-rc2 |
301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 |
{ port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET; port->data_addr = base + VSC_SATA_TF_DATA_OFFSET; port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET; port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET; port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET; port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET; port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET; port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET; port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET; port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET; port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET; port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET; port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET; port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET; port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET; |
0d5ff5667 libata: convert t... |
317 318 |
writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET); writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET); |
1da177e4c Linux-2.6.12-rc2 |
319 |
} |
5796d1c4c [libata] Address ... |
320 321 |
static int __devinit vsc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) |
1da177e4c Linux-2.6.12-rc2 |
322 |
{ |
4447d3515 libata: convert t... |
323 324 325 |
static const struct ata_port_info pi = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, |
14bdef982 [libata] convert ... |
326 327 |
.pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, |
bf6263a85 [libata] Use ATA_... |
328 |
.udma_mask = ATA_UDMA6, |
4447d3515 libata: convert t... |
329 330 331 |
.port_ops = &vsc_sata_ops, }; const struct ata_port_info *ppi[] = { &pi, NULL }; |
1da177e4c Linux-2.6.12-rc2 |
332 |
static int printed_version; |
4447d3515 libata: convert t... |
333 |
struct ata_host *host; |
307e4dc28 [PATCH] iomem ann... |
334 |
void __iomem *mmio_base; |
4447d3515 libata: convert t... |
335 |
int i, rc; |
7de970e11 sata_vsc: use def... |
336 |
u8 cls; |
1da177e4c Linux-2.6.12-rc2 |
337 338 |
if (!printed_version++) |
a9524a76f [libata] use dev_... |
339 340 |
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION " "); |
1da177e4c Linux-2.6.12-rc2 |
341 |
|
4447d3515 libata: convert t... |
342 343 344 345 |
/* allocate host */ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4); if (!host) return -ENOMEM; |
24dc5f33e libata: update li... |
346 |
rc = pcim_enable_device(pdev); |
1da177e4c Linux-2.6.12-rc2 |
347 348 |
if (rc) return rc; |
4447d3515 libata: convert t... |
349 |
/* check if we have needed resource mapped */ |
24dc5f33e libata: update li... |
350 351 |
if (pci_resource_len(pdev, 0) == 0) return -ENODEV; |
1da177e4c Linux-2.6.12-rc2 |
352 |
|
4447d3515 libata: convert t... |
353 |
/* map IO regions and intialize host accordingly */ |
0d5ff5667 libata: convert t... |
354 355 |
rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME); if (rc == -EBUSY) |
24dc5f33e libata: update li... |
356 |
pcim_pin_device(pdev); |
0d5ff5667 libata: convert t... |
357 |
if (rc) |
24dc5f33e libata: update li... |
358 |
return rc; |
4447d3515 libata: convert t... |
359 360 361 |
host->iomap = pcim_iomap_table(pdev); mmio_base = host->iomap[VSC_MMIO_BAR]; |
cbcdd8759 libata: implement... |
362 363 364 365 366 367 368 369 370 |
for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET; vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset); ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio"); ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port"); } |
1da177e4c Linux-2.6.12-rc2 |
371 372 373 374 |
/* * Use 32 bit DMA mask, because 64 bit address support is poor. */ |
284901a90 dma-mapping: repl... |
375 |
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
1da177e4c Linux-2.6.12-rc2 |
376 |
if (rc) |
24dc5f33e libata: update li... |
377 |
return rc; |
284901a90 dma-mapping: repl... |
378 |
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
1da177e4c Linux-2.6.12-rc2 |
379 |
if (rc) |
24dc5f33e libata: update li... |
380 |
return rc; |
7cbaa86b9 [libata] sata_vsc... |
381 |
|
1da177e4c Linux-2.6.12-rc2 |
382 |
/* |
7de970e11 sata_vsc: use def... |
383 384 |
* Due to a bug in the chip, the default cache line size can't be * used (unless the default is non-zero). |
1da177e4c Linux-2.6.12-rc2 |
385 |
*/ |
7de970e11 sata_vsc: use def... |
386 387 388 |
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls); if (cls == 0x00) pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); |
1da177e4c Linux-2.6.12-rc2 |
389 |
|
24dc5f33e libata: update li... |
390 |
if (pci_enable_msi(pdev) == 0) |
7cbaa86b9 [libata] sata_vsc... |
391 |
pci_intx(pdev, 0); |
1da177e4c Linux-2.6.12-rc2 |
392 |
|
8a60a0712 libata: trim trai... |
393 |
/* |
1da177e4c Linux-2.6.12-rc2 |
394 395 396 397 398 399 |
* Config offset 0x98 is "Extended Control and Status Register 0" * Default value is (1 << 28). All bits except bit 28 are reserved in * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. * If bit 28 is clear, each port has its own LED. */ pci_write_config_dword(pdev, 0x98, 0); |
4447d3515 libata: convert t... |
400 401 402 |
pci_set_master(pdev); return ata_host_activate(host, pdev->irq, vsc_sata_interrupt, IRQF_SHARED, &vsc_sata_sht); |
1da177e4c Linux-2.6.12-rc2 |
403 |
} |
3b7d697df [libata] constify... |
404 |
static const struct pci_device_id vsc_sata_pci_tbl[] = { |
438bc9c3d [libata] sata_vsc... |
405 |
{ PCI_VENDOR_ID_VITESSE, 0x7174, |
74d0a988d [PATCH] PCI: Move... |
406 |
PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, |
438bc9c3d [libata] sata_vsc... |
407 |
{ PCI_VENDOR_ID_INTEL, 0x3200, |
74d0a988d [PATCH] PCI: Move... |
408 |
PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, |
2d2744fc8 [libata] PCI ID t... |
409 |
|
438bc9c3d [libata] sata_vsc... |
410 |
{ } /* terminate list */ |
1da177e4c Linux-2.6.12-rc2 |
411 |
}; |
1da177e4c Linux-2.6.12-rc2 |
412 413 414 415 416 417 |
static struct pci_driver vsc_sata_pci_driver = { .name = DRV_NAME, .id_table = vsc_sata_pci_tbl, .probe = vsc_sata_init_one, .remove = ata_pci_remove_one, }; |
1da177e4c Linux-2.6.12-rc2 |
418 419 |
static int __init vsc_sata_init(void) { |
b7887196e [PATCH] libata: r... |
420 |
return pci_register_driver(&vsc_sata_pci_driver); |
1da177e4c Linux-2.6.12-rc2 |
421 |
} |
1da177e4c Linux-2.6.12-rc2 |
422 423 424 425 |
static void __exit vsc_sata_exit(void) { pci_unregister_driver(&vsc_sata_pci_driver); } |
1da177e4c Linux-2.6.12-rc2 |
426 427 428 429 430 431 432 433 |
MODULE_AUTHOR("Jeremy Higdon"); MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl); MODULE_VERSION(DRV_VERSION); module_init(vsc_sata_init); module_exit(vsc_sata_exit); |