Blame view
scripts/emb_mk_yocto_sdcard/README.txt
1.51 KB
723226c1a Yocto Sumo Suppor... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 |
How to use the Embedian SD card creation script: ================================================= This utility is provided on an "AS IS" basis. This is the script we use to create our recovery SD card. For machines with Android support, it is a part of a larger script we use to create our recovery SD card, which also includes Android. It is a good example for using the output of the Yocto build to create a bootable SD card, and use it to flash the target NAND flash/eMMC. Note: Before running this script you need to bitbake fsl-image-gui. Usage: sudo MACHINE=<smarcimx8m2g|smarcimx8m4g> ./emb-create-yocto-sdcard.sh [options] /dev/sdX (Change /dev/sdX to your device name) options: -h Display help message -s Only show partition sizes to be written, without actually write them -a Automatically set the rootfs partition size to fill the SD card -r Select alternative rootfs for recovery images (default: build_x11/tmp/deploy/images/<machine name>/fsl-image-validation-imx.tar.bz2) If you don't use the '-a' option, a default rootfs size of 3700MiB will be used. The '-r' option allows you to create a bootable sdcard with an alternative image for the installation to NAND flash or eMMC. Example: "-r tmp/deploy/images/<machine name>/fsl-image-qt5-validation-imx" -- selects the "Qt5 image with X11" recovery image Once the script is done, use the SD card to boot, and then to flash your internal storage/s either use the icons, or the following linux shell script: install_yocto.sh |