/*
   * Copyright (c) 2016 Intel Corporation
   *
   * Permission to use, copy, modify, distribute, and sell this software and its
   * documentation for any purpose is hereby granted without fee, provided that
   * the above copyright notice appear in all copies and that both that copyright
   * notice and this permission notice appear in supporting documentation, and
   * that the name of the copyright holders not be used in advertising or
   * publicity pertaining to distribution of the software without specific,
   * written prior permission.  The copyright holders make no representations
   * about the suitability of this software for any purpose.  It is provided "as
   * is" without express or implied warranty.
   *
   * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
   * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
   * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
   * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
   * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
   * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
   * OF THIS SOFTWARE.
   */
  
  #ifndef __DRM_CONNECTOR_H__
  #define __DRM_CONNECTOR_H__
  
  #include <linux/list.h>
  #include <linux/ctype.h>

  #include <linux/hdmi.h>

  #include <drm/drm_mode_object.h>

  #include <uapi/drm/drm_mode.h>

  struct drm_connector_helper_funcs;

  struct drm_modeset_acquire_ctx;

  struct drm_device;
  struct drm_crtc;
  struct drm_encoder;
  struct drm_property;
  struct drm_property_blob;

  struct drm_printer;

  struct edid;
  
  enum drm_connector_force {
  	DRM_FORCE_UNSPECIFIED,
  	DRM_FORCE_OFF,
  	DRM_FORCE_ON,         /* force on analog part normally */
  	DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
  };

  /**
   * enum drm_connector_status - status for a &drm_connector
   *
   * This enum is used to track the connector status. There are no separate
   * #defines for the uapi!
   */

  enum drm_connector_status {

  	/**
  	 * @connector_status_connected: The connector is definitely connected to
  	 * a sink device, and can be enabled.
  	 */

  	connector_status_connected = 1,

  	/**
  	 * @connector_status_disconnected: The connector isn't connected to a
  	 * sink device which can be autodetect. For digital outputs like DP or
  	 * HDMI (which can be realiable probed) this means there's really
  	 * nothing there. It is driver-dependent whether a connector with this
  	 * status can be lit up or not.
  	 */

  	connector_status_disconnected = 2,

  	/**
  	 * @connector_status_unknown: The connector's status could not be
  	 * reliably detected. This happens when probing would either cause
  	 * flicker (like load-detection when the connector is in use), or when a
  	 * hardware resource isn't available (like when load-detection needs a
  	 * free CRTC). It should be possible to light up the connector with one
  	 * of the listed fallback modes. For default configuration userspace
  	 * should only try to light up connectors with unknown status when
  	 * there's not connector with @connector_status_connected.
  	 */

  	connector_status_unknown = 3,
  };
  
  enum subpixel_order {
  	SubPixelUnknown = 0,
  	SubPixelHorizontalRGB,
  	SubPixelHorizontalBGR,
  	SubPixelVerticalRGB,
  	SubPixelVerticalBGR,
  	SubPixelNone,

  
  };

  /**
   * struct drm_scrambling: sink's scrambling support.
   */
  struct drm_scrambling {
  	/**
  	 * @supported: scrambling supported for rates > 340 Mhz.
  	 */
  	bool supported;
  	/**
  	 * @low_rates: scrambling supported for rates <= 340 Mhz.
  	 */
  	bool low_rates;
  };

  /*
   * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink
   *
   * Provides SCDC register support and capabilities related information on a
   * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0.
   */
  struct drm_scdc {
  	/**
  	 * @supported: status control & data channel present.
  	 */
  	bool supported;
  	/**
  	 * @read_request: sink is capable of generating scdc read request.
  	 */
  	bool read_request;

  	/**
  	 * @scrambling: sink's scrambling capabilities
  	 */
  	struct drm_scrambling scrambling;

  };

  /**
   * struct drm_hdmi_info - runtime information about the connected HDMI sink
   *
   * Describes if a given display supports advanced HDMI 2.0 features.
   * This information is available in CEA-861-F extension blocks (like HF-VSDB).
   */
  struct drm_hdmi_info {

  	/** @scdc: sink's scdc support and capabilities */

  	struct drm_scdc scdc;

  
  	/**
  	 * @y420_vdb_modes: bitmap of modes which can support ycbcr420
  	 * output only (not normal RGB/YCBCR444/422 outputs). There are total
  	 * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map
  	 * upto 128 VICs;
  	 */
  	unsigned long y420_vdb_modes[BITS_TO_LONGS(128)];

  
  	/**
  	 * @y420_cmdb_modes: bitmap of modes which can support ycbcr420
  	 * output also, along with normal HDMI outputs. There are total 107
  	 * VICs defined by CEA-861-F spec, so the size is 128 bits to map upto
  	 * 128 VICs;
  	 */
  	unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)];
  
  	/** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */
  	u64 y420_cmdb_map;

  
  	/** @y420_dc_modes: bitmap of deep color support index */
  	u8 y420_dc_modes;

  
  	/* Colorimerty info from EDID */
  	u32 colorimetry;

  	/* Panel HDR capabilities */
  	struct hdr_static_metadata hdr_panel_metadata;

  };

  /**

   * enum drm_link_status - connector's link_status property value
   *
   * This enum is used as the connector's link status property value.
   * It is set to the values defined in uapi.

   *
   * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful
   *                        link training
   * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training
   *                       failure

   */
  enum drm_link_status {
  	DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD,
  	DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD,
  };
  
  /**

   * struct drm_display_info - runtime data about the connected sink
   *
   * Describes a given display (e.g. CRT or flat panel) and its limitations. For
   * fixed display sinks like built-in panels there's not much difference between

   * this and &struct drm_connector. But for sinks with a real cable this

   * structure is meant to describe all the things at the other end of the cable.
   *
   * For sinks which provide an EDID this can be filled out by calling
   * drm_add_edid_modes().

   */
  struct drm_display_info {

  	/**
  	 * @name: Name of the display.
  	 */

  	char name[DRM_DISPLAY_INFO_LEN];

  	/**
  	 * @width_mm: Physical width in mm.
  	 */

          unsigned int width_mm;

  	/**
  	 * @height_mm: Physical height in mm.
  	 */

  	unsigned int height_mm;

  	/**
  	 * @pixel_clock: Maximum pixel clock supported by the sink, in units of

  	 * 100Hz. This mismatches the clock in &drm_display_mode (which is in

  	 * kHZ), because that's what the EDID uses as base unit.
  	 */

  	unsigned int pixel_clock;

  	/**
  	 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs.
  	 */

  	unsigned int bpc;

  	/**
  	 * @subpixel_order: Subpixel order of LCD panels.
  	 */

  	enum subpixel_order subpixel_order;
  
  #define DRM_COLOR_FORMAT_RGB444		(1<<0)
  #define DRM_COLOR_FORMAT_YCRCB444	(1<<1)
  #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)

  #define DRM_COLOR_FORMAT_YCRCB420	(1<<3)

  	/**
  	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
  	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
  	 * as used to describe the pixel format in framebuffers, and also don't
  	 * match the formats in @bus_formats which are shared with v4l.
  	 */

  	u32 color_formats;

  	/**
  	 * @bus_formats: Pixel data format on the wire, somewhat redundant with
  	 * @color_formats. Array of size @num_bus_formats encoded using
  	 * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers.
  	 */

  	const u32 *bus_formats;

  	/**
  	 * @num_bus_formats: Size of @bus_formats array.
  	 */

  	unsigned int num_bus_formats;
  
  #define DRM_BUS_FLAG_DE_LOW		(1<<0)
  #define DRM_BUS_FLAG_DE_HIGH		(1<<1)
  /* drive data on pos. edge */
  #define DRM_BUS_FLAG_PIXDATA_POSEDGE	(1<<2)
  /* drive data on neg. edge */
  #define DRM_BUS_FLAG_PIXDATA_NEGEDGE	(1<<3)

  /* data is transmitted MSB to LSB on the bus */
  #define DRM_BUS_FLAG_DATA_MSB_TO_LSB	(1<<4)
  /* data is transmitted LSB to MSB on the bus */
  #define DRM_BUS_FLAG_DATA_LSB_TO_MSB	(1<<5)

  	/**
  	 * @bus_flags: Additional information (like pixel signal polarity) for
  	 * the pixel data on the bus, using DRM_BUS_FLAGS\_ defines.
  	 */

  	u32 bus_flags;

  	/**

  	 * @max_tmds_clock: Maximum TMDS clock rate supported by the
  	 * sink in kHz. 0 means undefined.
  	 */
  	int max_tmds_clock;
  
  	/**
  	 * @dvi_dual: Dual-link DVI sink?
  	 */
  	bool dvi_dual;
  
  	/**

  	 * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even
  	 * more stuff redundant with @bus_formats.
  	 */

  	u8 edid_hdmi_dc_modes;

  	/**
  	 * @cea_rev: CEA revision of the HDMI sink.
  	 */

  	u8 cea_rev;

  
  	/**

  	 * @non_desktop: Non desktop display (HMD)
  	 */
  	bool non_desktop;
  
  	/**

  	 * @hdmi: advance features of a HDMI sink.
  	 */
  	struct drm_hdmi_info hdmi;

  };

  int drm_display_info_set_bus_formats(struct drm_display_info *info,
  				     const u32 *formats,
  				     unsigned int num_formats);

  /**

   * struct drm_tv_connector_state - TV connector related states
   * @subconnector: selected subconnector
   * @margins: left/right/top/bottom margins
   * @mode: TV mode
   * @brightness: brightness in percent
   * @contrast: contrast in percent
   * @flicker_reduction: flicker reduction in percent
   * @overscan: overscan in percent
   * @saturation: saturation in percent
   * @hue: hue in percent
   */
  struct drm_tv_connector_state {
  	enum drm_mode_subconnector subconnector;
  	struct {
  		unsigned int left;
  		unsigned int right;
  		unsigned int top;
  		unsigned int bottom;
  	} margins;
  	unsigned int mode;
  	unsigned int brightness;
  	unsigned int contrast;
  	unsigned int flicker_reduction;
  	unsigned int overscan;
  	unsigned int saturation;
  	unsigned int hue;
  };
  
  /**

   * struct drm_connector_state - mutable connector state
   * @connector: backpointer to the connector

   * @best_encoder: can be used by helpers and drivers to select the encoder
   * @state: backpointer to global drm_atomic_state

   * @tv: TV connector state

   */
  struct drm_connector_state {
  	struct drm_connector *connector;

  	/**
  	 * @crtc: CRTC to connect connector to, NULL if disabled.
  	 *
  	 * Do not change this directly, use drm_atomic_set_crtc_for_connector()
  	 * instead.
  	 */
  	struct drm_crtc *crtc;

  
  	struct drm_encoder *best_encoder;

  	/**
  	 * @link_status: Connector link_status to keep track of whether link is
  	 * GOOD or BAD to notify userspace if retraining is necessary.
  	 */
  	enum drm_link_status link_status;

  	struct drm_atomic_state *state;

  
  	struct drm_tv_connector_state tv;

  
  	/**
  	 * @picture_aspect_ratio: Connector property to control the
  	 * HDMI infoframe aspect ratio setting.
  	 *

  	 * The %DRM_MODE_PICTURE_ASPECT_\* values much match the

  	 * values for &enum hdmi_picture_aspect
  	 */
  	enum hdmi_picture_aspect picture_aspect_ratio;

  
  	/**
  	 * @scaling_mode: Connector property to control the
  	 * upscaling, mostly used for built-in panels.
  	 */
  	unsigned int scaling_mode;

  
  	/**
  	 * @metadata_blob_ptr:
  	 * DRM blob property for HDR metadata
  	 */
  	struct drm_property_blob *hdr_source_metadata_blob_ptr;
  	bool hdr_metadata_changed : 1;

  };
  
  /**
   * struct drm_connector_funcs - control connectors on a given device
   *
   * Each CRTC may have one or more connectors attached to it.  The functions
   * below allow the core DRM code to control connectors, enumerate available modes,
   * etc.
   */
  struct drm_connector_funcs {
  	/**
  	 * @dpms:
  	 *
  	 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
  	 * is exposed as a standard property on the connector, but diverted to
  	 * this callback in the drm core. Note that atomic drivers don't
  	 * implement the 4 level DPMS support on the connector any more, but
  	 * instead only have an on/off "ACTIVE" property on the CRTC object.
  	 *

  	 * This hook is not used by atomic drivers, remapping of the legacy DPMS
  	 * property is entirely handled in the DRM core.

  	 *
  	 * RETURNS:
  	 *
  	 * 0 on success or a negative error code on failure.
  	 */
  	int (*dpms)(struct drm_connector *connector, int mode);
  
  	/**
  	 * @reset:
  	 *
  	 * Reset connector hardware and software state to off. This function isn't
  	 * called by the core directly, only through drm_mode_config_reset().
  	 * It's not a helper hook only for historical reasons.
  	 *
  	 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
  	 * atomic state using this hook.
  	 */
  	void (*reset)(struct drm_connector *connector);
  
  	/**
  	 * @detect:
  	 *
  	 * Check to see if anything is attached to the connector. The parameter
  	 * force is set to false whilst polling, true when checking the
  	 * connector due to a user request. force can be used by the driver to
  	 * avoid expensive, destructive operations during automated probing.
  	 *

  	 * This callback is optional, if not implemented the connector will be
  	 * considered as always being attached.
  	 *

  	 * FIXME:
  	 *
  	 * Note that this hook is only called by the probe helper. It's not in
  	 * the helper library vtable purely for historical reasons. The only DRM
  	 * core	entry point to probe connector state is @fill_modes.
  	 *

  	 * Note that the helper library will already hold
  	 * &drm_mode_config.connection_mutex. Drivers which need to grab additional
  	 * locks to avoid races with concurrent modeset changes need to use
  	 * &drm_connector_helper_funcs.detect_ctx instead.
  	 *

  	 * RETURNS:
  	 *
  	 * drm_connector_status indicating the connector's status.
  	 */
  	enum drm_connector_status (*detect)(struct drm_connector *connector,
  					    bool force);
  
  	/**
  	 * @force:
  	 *
  	 * This function is called to update internal encoder state when the
  	 * connector is forced to a certain state by userspace, either through
  	 * the sysfs interfaces or on the kernel cmdline. In that case the
  	 * @detect callback isn't called.
  	 *
  	 * FIXME:
  	 *
  	 * Note that this hook is only called by the probe helper. It's not in
  	 * the helper library vtable purely for historical reasons. The only DRM
  	 * core	entry point to probe connector state is @fill_modes.
  	 */
  	void (*force)(struct drm_connector *connector);
  
  	/**
  	 * @fill_modes:
  	 *
  	 * Entry point for output detection and basic mode validation. The
  	 * driver should reprobe the output if needed (e.g. when hotplug

  	 * handling is unreliable), add all detected modes to &drm_connector.modes

  	 * and filter out any the device can't support in any configuration. It
  	 * also needs to filter out any modes wider or higher than the
  	 * parameters max_width and max_height indicate.
  	 *
  	 * The drivers must also prune any modes no longer valid from

  	 * &drm_connector.modes. Furthermore it must update
  	 * &drm_connector.status and &drm_connector.edid.  If no EDID has been
  	 * received for this output connector->edid must be NULL.

  	 *
  	 * Drivers using the probe helpers should use
  	 * drm_helper_probe_single_connector_modes() or
  	 * drm_helper_probe_single_connector_modes_nomerge() to implement this
  	 * function.
  	 *
  	 * RETURNS:
  	 *

  	 * The number of modes detected and filled into &drm_connector.modes.

  	 */
  	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
  
  	/**
  	 * @set_property:
  	 *
  	 * This is the legacy entry point to update a property attached to the
  	 * connector.
  	 *

  	 * This callback is optional if the driver does not support any legacy

  	 * driver-private properties. For atomic drivers it is not used because
  	 * property handling is done entirely in the DRM core.

  	 *
  	 * RETURNS:
  	 *
  	 * 0 on success or a negative error code on failure.
  	 */
  	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
  			     uint64_t val);
  
  	/**
  	 * @late_register:
  	 *
  	 * This optional hook can be used to register additional userspace
  	 * interfaces attached to the connector, light backlight control, i2c,
  	 * DP aux or similar interfaces. It is called late in the driver load
  	 * sequence from drm_connector_register() when registering all the
  	 * core drm connector interfaces. Everything added from this callback
  	 * should be unregistered in the early_unregister callback.
  	 *

  	 * This is called while holding &drm_connector.mutex.

  	 *

  	 * Returns:
  	 *
  	 * 0 on success, or a negative error code on failure.
  	 */
  	int (*late_register)(struct drm_connector *connector);
  
  	/**
  	 * @early_unregister:
  	 *
  	 * This optional hook should be used to unregister the additional
  	 * userspace interfaces attached to the connector from

  	 * late_register(). It is called from drm_connector_unregister(),

  	 * early in the driver unload sequence to disable userspace access
  	 * before data structures are torndown.

  	 *

  	 * This is called while holding &drm_connector.mutex.

  	 */
  	void (*early_unregister)(struct drm_connector *connector);
  
  	/**
  	 * @destroy:
  	 *
  	 * Clean up connector resources. This is called at driver unload time
  	 * through drm_mode_config_cleanup(). It can also be called at runtime
  	 * when a connector is being hot-unplugged for drivers that support
  	 * connector hotplugging (e.g. DisplayPort MST).
  	 */
  	void (*destroy)(struct drm_connector *connector);
  
  	/**
  	 * @atomic_duplicate_state:
  	 *
  	 * Duplicate the current atomic state for this connector and return it.

  	 * The core and helpers guarantee that any atomic state duplicated with

  	 * this hook and still owned by the caller (i.e. not transferred to the

  	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
  	 * cleaned up by calling the @atomic_destroy_state hook in this
  	 * structure.

  	 *

  	 * Atomic drivers which don't subclass &struct drm_connector_state should use

  	 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
  	 * state structure to extend it with driver-private state should use
  	 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
  	 * duplicated in a consistent fashion across drivers.
  	 *

  	 * It is an error to call this hook before &drm_connector.state has been

  	 * initialized correctly.
  	 *
  	 * NOTE:
  	 *
  	 * If the duplicate state references refcounted resources this hook must
  	 * acquire a reference for each of them. The driver must release these
  	 * references again in @atomic_destroy_state.
  	 *
  	 * RETURNS:
  	 *
  	 * Duplicated atomic state or NULL when the allocation failed.
  	 */
  	struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
  
  	/**
  	 * @atomic_destroy_state:
  	 *
  	 * Destroy a state duplicated with @atomic_duplicate_state and release
  	 * or unreference all resources it references
  	 */
  	void (*atomic_destroy_state)(struct drm_connector *connector,
  				     struct drm_connector_state *state);
  
  	/**
  	 * @atomic_set_property:
  	 *
  	 * Decode a driver-private property value and store the decoded value
  	 * into the passed-in state structure. Since the atomic core decodes all
  	 * standardized properties (even for extensions beyond the core set of
  	 * properties which might not be implemented by all drivers) this
  	 * requires drivers to subclass the state structure.
  	 *
  	 * Such driver-private properties should really only be implemented for
  	 * truly hardware/vendor specific state. Instead it is preferred to
  	 * standardize atomic extension and decode the properties used to expose
  	 * such an extension in the core.
  	 *
  	 * Do not call this function directly, use
  	 * drm_atomic_connector_set_property() instead.
  	 *
  	 * This callback is optional if the driver does not support any
  	 * driver-private atomic properties.
  	 *
  	 * NOTE:
  	 *
  	 * This function is called in the state assembly phase of atomic
  	 * modesets, which can be aborted for any reason (including on
  	 * userspace's request to just check whether a configuration would be
  	 * possible). Drivers MUST NOT touch any persistent state (hardware or
  	 * software) or data structures except the passed in @state parameter.
  	 *
  	 * Also since userspace controls in which order properties are set this
  	 * function must not do any input validation (since the state update is
  	 * incomplete and hence likely inconsistent). Instead any such input
  	 * validation must be done in the various atomic_check callbacks.
  	 *
  	 * RETURNS:
  	 *
  	 * 0 if the property has been found, -EINVAL if the property isn't
  	 * implemented by the driver (which shouldn't ever happen, the core only
  	 * asks for properties attached to this connector). No other validation
  	 * is allowed by the driver. The core already checks that the property
  	 * value is within the range (integer, valid enum value, ...) the driver
  	 * set when registering the property.
  	 */
  	int (*atomic_set_property)(struct drm_connector *connector,
  				   struct drm_connector_state *state,
  				   struct drm_property *property,
  				   uint64_t val);
  
  	/**
  	 * @atomic_get_property:
  	 *
  	 * Reads out the decoded driver-private property. This is used to
  	 * implement the GETCONNECTOR IOCTL.
  	 *
  	 * Do not call this function directly, use
  	 * drm_atomic_connector_get_property() instead.
  	 *
  	 * This callback is optional if the driver does not support any
  	 * driver-private atomic properties.
  	 *
  	 * RETURNS:
  	 *
  	 * 0 on success, -EINVAL if the property isn't implemented by the
  	 * driver (which shouldn't ever happen, the core only asks for
  	 * properties attached to this connector).
  	 */
  	int (*atomic_get_property)(struct drm_connector *connector,
  				   const struct drm_connector_state *state,
  				   struct drm_property *property,
  				   uint64_t *val);

  
  	/**
  	 * @atomic_print_state:
  	 *

  	 * If driver subclasses &struct drm_connector_state, it should implement

  	 * this optional hook for printing additional driver specific state.
  	 *
  	 * Do not call this directly, use drm_atomic_connector_print_state()
  	 * instead.
  	 */
  	void (*atomic_print_state)(struct drm_printer *p,
  				   const struct drm_connector_state *state);

  };
  
  /* mode specified on the command line */
  struct drm_cmdline_mode {
  	bool specified;
  	bool refresh_specified;
  	bool bpp_specified;
  	int xres, yres;
  	int bpp;
  	int refresh;
  	bool rb;
  	bool interlace;
  	bool cvt;
  	bool margins;
  	enum drm_connector_force force;
  };
  
  /**
   * struct drm_connector - central DRM connector control structure
   * @dev: parent DRM device
   * @kdev: kernel device for sysfs attributes
   * @attr: sysfs attributes
   * @head: list management
   * @base: base KMS object
   * @name: human readable name, can be overwritten by the driver
   * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
   * @connector_type_id: index into connector type enum
   * @interlace_allowed: can this connector handle interlaced modes?
   * @doublescan_allowed: can this connector handle doublescan?
   * @stereo_allowed: can this connector handle stereo modes?

   * @funcs: connector control functions
   * @edid_blob_ptr: DRM property containing EDID if present
   * @properties: property tracking for this connector

   * @dpms: current dpms state
   * @helper_private: mid-layer private data
   * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
   * @force: a DRM_FORCE_<foo> state for forced mode sets
   * @override_edid: has the EDID been overwritten through debugfs for testing?
   * @encoder_ids: valid encoders for this connector
   * @encoder: encoder driving this connector, if any
   * @eld: EDID-like data, if present

   * @latency_present: AV delay info from ELD, if found
   * @video_latency: video latency info from ELD, if found
   * @audio_latency: audio latency info from ELD, if found
   * @null_edid_counter: track sinks that give us all zeros for the EDID
   * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
   * @edid_corrupt: indicates whether the last read EDID was corrupt
   * @debugfs_entry: debugfs directory for this connector

   * @has_tile: is this connector connected to a tiled monitor
   * @tile_group: tile group for the connected monitor
   * @tile_is_single_monitor: whether the tile is one monitor housing
   * @num_h_tile: number of horizontal tiles in the tile group
   * @num_v_tile: number of vertical tiles in the tile group
   * @tile_h_loc: horizontal location of this tile
   * @tile_v_loc: vertical location of this tile
   * @tile_h_size: horizontal size of this tile.
   * @tile_v_size: vertical size of this tile.

   * @scaling_mode_property:  Optional atomic property to control the upscaling.

   *
   * Each connector may be connected to one or more CRTCs, or may be clonable by
   * another connector if they can share a CRTC.  Each connector also has a specific
   * position in the broader display (referred to as a 'screen' though it could
   * span multiple monitors).
   */
  struct drm_connector {
  	struct drm_device *dev;
  	struct device *kdev;
  	struct device_attribute *attr;
  	struct list_head head;
  
  	struct drm_mode_object base;
  
  	char *name;
  
  	/**

  	 * @mutex: Lock for general connector state, but currently only protects

  	 * @registered. Most of the connector state is still protected by
  	 * &drm_mode_config.mutex.

  	 */
  	struct mutex mutex;
  
  	/**

  	 * @index: Compacted connector index, which matches the position inside
  	 * the mode_config.list for drivers not supporting hot-add/removing. Can
  	 * be used as an array index. It is invariant over the lifetime of the
  	 * connector.
  	 */
  	unsigned index;
  
  	int connector_type;
  	int connector_type_id;
  	bool interlace_allowed;
  	bool doublescan_allowed;
  	bool stereo_allowed;

  
  	/**
  	 * @ycbcr_420_allowed : This bool indicates if this connector is
  	 * capable of handling YCBCR 420 output. While parsing the EDID
  	 * blocks, its very helpful to know, if the source is capable of
  	 * handling YCBCR 420 outputs.
  	 */
  	bool ycbcr_420_allowed;

  	/**
  	 * @registered: Is this connector exposed (registered) with userspace?
  	 * Protected by @mutex.
  	 */

  	bool registered;

  
  	/**
  	 * @modes:
  	 * Modes available on this connector (from fill_modes() + user).

  	 * Protected by &drm_mode_config.mutex.

  	 */

  	struct list_head modes;

  	/**
  	 * @status:
  	 * One of the drm_connector_status enums (connected, not, or unknown).

  	 * Protected by &drm_mode_config.mutex.

  	 */

  	enum drm_connector_status status;

  	/**
  	 * @probed_modes:
  	 * These are modes added by probing with DDC or the BIOS, before

  	 * filtering is applied. Used by the probe helpers. Protected by
  	 * &drm_mode_config.mutex.

  	 */

  	struct list_head probed_modes;

  	/**
  	 * @display_info: Display information is filled from EDID information
  	 * when a display is detected. For non hot-pluggable displays such as
  	 * flat panels in embedded systems, the driver should initialize the

  	 * &drm_display_info.width_mm and &drm_display_info.height_mm fields
  	 * with the physical size of the display.

  	 *

  	 * Protected by &drm_mode_config.mutex.

  	 */

  	struct drm_display_info display_info;
  	const struct drm_connector_funcs *funcs;
  
  	struct drm_property_blob *edid_blob_ptr;
  	struct drm_object_properties properties;

  	struct drm_property *scaling_mode_property;

  	/**
  	 * @path_blob_ptr:
  	 *
  	 * DRM blob property data for the DP MST path property.
  	 */
  	struct drm_property_blob *path_blob_ptr;
  
  	/**
  	 * @tile_blob_ptr:
  	 *
  	 * DRM blob property data for the tile property (used mostly by DP MST).
  	 * This is meant for screens which are driven through separate display
  	 * pipelines represented by &drm_crtc, which might not be running with
  	 * genlocked clocks. For tiled panels which are genlocked, like
  	 * dual-link LVDS or dual-link DSI, the driver should try to not expose
  	 * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
  	 */
  	struct drm_property_blob *tile_blob_ptr;
  
  /* should we poll this connector for connects and disconnects */
  /* hot plug detectable */
  #define DRM_CONNECTOR_POLL_HPD (1 << 0)
  /* poll for connections */
  #define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
  /* can cleanly poll for disconnections without flickering the screen */
  /* DACs should rarely do this without a lot of testing */
  #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)

  	/**
  	 * @polled:
  	 *
  	 * Connector polling mode, a combination of
  	 *
  	 * DRM_CONNECTOR_POLL_HPD
  	 *     The connector generates hotplug events and doesn't need to be
  	 *     periodically polled. The CONNECT and DISCONNECT flags must not
  	 *     be set together with the HPD flag.
  	 *
  	 * DRM_CONNECTOR_POLL_CONNECT
  	 *     Periodically poll the connector for connection.
  	 *
  	 * DRM_CONNECTOR_POLL_DISCONNECT
  	 *     Periodically poll the connector for disconnection.
  	 *
  	 * Set to 0 for connectors that don't support connection status
  	 * discovery.
  	 */
  	uint8_t polled;

  
  	/* requested DPMS state */
  	int dpms;
  
  	const struct drm_connector_helper_funcs *helper_private;
  
  	/* forced on connector */
  	struct drm_cmdline_mode cmdline_mode;
  	enum drm_connector_force force;
  	bool override_edid;
  
  #define DRM_CONNECTOR_MAX_ENCODER 3
  	uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
  	struct drm_encoder *encoder; /* currently active encoder */
  
  #define MAX_ELD_BYTES	128
  	/* EDID bits */
  	uint8_t eld[MAX_ELD_BYTES];

  	bool latency_present[2];
  	int video_latency[2];	/* [0]: progressive, [1]: interlaced */
  	int audio_latency[2];
  	int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
  	unsigned bad_edid_counter;
  
  	/* Flag for raw EDID header corruption - used in Displayport
  	 * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
  	 */
  	bool edid_corrupt;
  
  	struct dentry *debugfs_entry;

  	/**
  	 * @state:
  	 *
  	 * Current atomic state for this connector.
  	 *
  	 * This is protected by @drm_mode_config.connection_mutex. Note that
  	 * nonblocking atomic commits access the current connector state without
  	 * taking locks. Either by going through the &struct drm_atomic_state
  	 * pointers, see for_each_connector_in_state(),
  	 * for_each_oldnew_connector_in_state(),
  	 * for_each_old_connector_in_state() and
  	 * for_each_new_connector_in_state(). Or through careful ordering of
  	 * atomic commit operations as implemented in the atomic helpers, see
  	 * &struct drm_crtc_commit.
  	 */

  	struct drm_connector_state *state;
  
  	/* DisplayID bits */
  	bool has_tile;
  	struct drm_tile_group *tile_group;
  	bool tile_is_single_monitor;
  
  	uint8_t num_h_tile, num_v_tile;
  	uint8_t tile_h_loc, tile_v_loc;
  	uint16_t tile_h_size, tile_v_size;

  
  	/* HDR metdata */

  	struct hdr_static_metadata *hdr_source_metadata;

  };
  
  #define obj_to_connector(x) container_of(x, struct drm_connector, base)
  
  int drm_connector_init(struct drm_device *dev,
  		       struct drm_connector *connector,
  		       const struct drm_connector_funcs *funcs,
  		       int connector_type);
  int drm_connector_register(struct drm_connector *connector);
  void drm_connector_unregister(struct drm_connector *connector);
  int drm_mode_connector_attach_encoder(struct drm_connector *connector,
  				      struct drm_encoder *encoder);
  
  void drm_connector_cleanup(struct drm_connector *connector);
  static inline unsigned drm_connector_index(struct drm_connector *connector)
  {
  	return connector->index;
  }
  
  /**
   * drm_connector_lookup - lookup connector object
   * @dev: DRM device
   * @id: connector object id
   *
   * This function looks up the connector object specified by id
   * add takes a reference to it.
   */
  static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,

  		struct drm_file *file_priv,

  		uint32_t id)
  {
  	struct drm_mode_object *mo;

  	mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR);

  	return mo ? obj_to_connector(mo) : NULL;
  }
  
  /**

   * drm_connector_get - acquire a connector reference
   * @connector: DRM connector

   *
   * This function increments the connector's refcount.
   */

  static inline void drm_connector_get(struct drm_connector *connector)
  {
  	drm_mode_object_get(&connector->base);
  }
  
  /**
   * drm_connector_put - release a connector reference
   * @connector: DRM connector
   *
   * This function decrements the connector's reference count and frees the
   * object if the reference count drops to zero.
   */
  static inline void drm_connector_put(struct drm_connector *connector)
  {
  	drm_mode_object_put(&connector->base);
  }
  
  /**
   * drm_connector_reference - acquire a connector reference
   * @connector: DRM connector
   *
   * This is a compatibility alias for drm_connector_get() and should not be
   * used by new code.
   */

  static inline void drm_connector_reference(struct drm_connector *connector)
  {

  	drm_connector_get(connector);

  }
  
  /**

   * drm_connector_unreference - release a connector reference
   * @connector: DRM connector

   *

   * This is a compatibility alias for drm_connector_put() and should not be
   * used by new code.

   */
  static inline void drm_connector_unreference(struct drm_connector *connector)
  {

  	drm_connector_put(connector);

  }
  
  const char *drm_get_connector_status_name(enum drm_connector_status status);
  const char *drm_get_subpixel_order_name(enum subpixel_order order);
  const char *drm_get_dpms_name(int val);
  const char *drm_get_dvi_i_subconnector_name(int val);
  const char *drm_get_dvi_i_select_name(int val);
  const char *drm_get_tv_subconnector_name(int val);
  const char *drm_get_tv_select_name(int val);
  
  int drm_mode_create_dvi_i_properties(struct drm_device *dev);
  int drm_mode_create_tv_properties(struct drm_device *dev,
  				  unsigned int num_modes,
  				  const char * const modes[]);
  int drm_mode_create_scaling_mode_property(struct drm_device *dev);

  int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
  					       u32 scaling_mode_mask);

  int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
  int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
  
  int drm_mode_connector_set_path_property(struct drm_connector *connector,
  					 const char *path);
  int drm_mode_connector_set_tile_property(struct drm_connector *connector);
  int drm_mode_connector_update_edid_property(struct drm_connector *connector,
  					    const struct edid *edid);

  void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
  						 uint64_t link_status);

  
  /**

   * struct drm_tile_group - Tile group metadata
   * @refcount: reference count
   * @dev: DRM device
   * @id: tile group id exposed to userspace
   * @group_data: Sink-private data identifying this group
   *
   * @group_data corresponds to displayid vend/prod/serial for external screens
   * with an EDID.
   */
  struct drm_tile_group {
  	struct kref refcount;
  	struct drm_device *dev;
  	int id;
  	u8 group_data[8];
  };
  
  struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
  						  char topology[8]);
  struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
  					       char topology[8]);
  void drm_mode_put_tile_group(struct drm_device *dev,
  			     struct drm_tile_group *tg);
  
  /**

   * struct drm_connector_list_iter - connector_list iterator
   *
   * This iterator tracks state needed to be able to walk the connector_list
   * within struct drm_mode_config. Only use together with

   * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and

   * drm_connector_list_iter_next() respectively the convenience macro
   * drm_for_each_connector_iter().
   */
  struct drm_connector_list_iter {
  /* private: */
  	struct drm_device *dev;
  	struct drm_connector *conn;
  };

  void drm_connector_list_iter_begin(struct drm_device *dev,
  				   struct drm_connector_list_iter *iter);

  struct drm_connector *
  drm_connector_list_iter_next(struct drm_connector_list_iter *iter);

  void drm_connector_list_iter_end(struct drm_connector_list_iter *iter);

  
  /**
   * drm_for_each_connector_iter - connector_list iterator macro

   * @connector: &struct drm_connector pointer used as cursor
   * @iter: &struct drm_connector_list_iter

   *
   * Note that @connector is only valid within the list body, if you want to use

   * @connector after calling drm_connector_list_iter_end() then you need to grab

   * your own reference first using drm_connector_get().

   */
  #define drm_for_each_connector_iter(connector, iter) \
  	while ((connector = drm_connector_list_iter_next(iter)))

  #endif