#
  # SATA/PATA driver configuration
  #

  menuconfig ATA
  	tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"

  	depends on HAS_IOMEM

  	depends on BLOCK

  	depends on !(M32R || M68K) || BROKEN

  	select SCSI

  	---help---
  	  If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  	  any other ATA device under Linux, say Y and make sure that you know
  	  the name of your ATA host adapter (the card inside your computer
  	  that "speaks" the ATA protocol, also called ATA controller),
  	  because you will be asked for it.

  	  NOTE: ATA enables basic SCSI support; *however*,
  	  'SCSI disk support', 'SCSI tape support', or
  	  'SCSI CDROM support' may also be needed,
  	  depending on your hardware configuration.

  if ATA

  config ATA_NONSTANDARD
         bool
         default n

  config ATA_ACPI

  	bool "ATA ACPI Support"

  	depends on ACPI && PCI

  	select ACPI_DOCK

  	default y
  	help
  	  This option adds support for ATA-related ACPI objects.
  	  These ACPI objects add the ability to retrieve taskfiles
  	  from the ACPI BIOS and write them to the disk controller.
  	  These objects may be related to performance, security,
  	  power management, or other areas.
  	  You can disable this at kernel boot time by using the
  	  option libata.noacpi=1

  config SATA_PMP
  	bool "SATA Port Multiplier support"
  	default y
  	help

  	  This option adds support for SATA Port Multipliers
  	  (the SATA version of an ethernet hub, or SAS expander).

  config SATA_AHCI

  	tristate "AHCI SATA support"

  	depends on PCI

  	help
  	  This option enables support for AHCI Serial ATA.
  
  	  If unsure, say N.

  config SATA_SIL24
  	tristate "Silicon Image 3124/3132 SATA support"
  	depends on PCI
  	help
  	  This option enables support for Silicon Image 3124/3132 Serial ATA.
  
  	  If unsure, say N.
  
  config SATA_FSL
  	tristate "Freescale 3.0Gbps SATA support"
  	depends on FSL_SOC
  	help
  	  This option enables support for Freescale 3.0Gbps SATA controller.
  	  It can be found on MPC837x and MPC8315.
  
  	  If unsure, say N.
  
  config ATA_SFF
  	bool "ATA SFF support"
  	default y
  	help
  	  This option adds support for ATA controllers with SFF
  	  compliant or similar programming interface.

  	  SFF is the legacy IDE interface that has been around since
  	  the dawn of time.  Almost all PATA controllers have an
  	  SFF interface.  Many SATA controllers have an SFF interface
  	  when configured into a legacy compatibility mode.
  
  	  For users with exclusively modern controllers like AHCI,
  	  Silicon Image 3124, or Marvell 6440, you may choose to
  	  disable this uneeded SFF support.
  
  	  If unsure, say Y.

  if ATA_SFF

  config SATA_SVW

  	tristate "ServerWorks Frodo / Apple K2 SATA support"

  	depends on PCI

  	help
  	  This option enables support for Broadcom/Serverworks/Apple K2
  	  SATA support.
  
  	  If unsure, say N.

  config ATA_PIIX

  	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"

  	depends on PCI

  	help

  	  This option enables support for ICH5/6/7/8 Serial ATA

  	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
  	  host controllers.

  
  	  If unsure, say N.

  config SATA_MV

  	tristate "Marvell SATA support"

  	help
  	  This option enables support for the Marvell Serial ATA family.

  	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
  	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.

  
  	  If unsure, say N.

  config SATA_NV

  	tristate "NVIDIA SATA support"

  	depends on PCI

  	help
  	  This option enables support for NVIDIA Serial ATA.
  
  	  If unsure, say N.

  config PDC_ADMA

  	tristate "Pacific Digital ADMA support"

  	depends on PCI

  	help
  	  This option enables support for Pacific Digital ADMA controllers
  
  	  If unsure, say N.

  config SATA_QSTOR

  	tristate "Pacific Digital SATA QStor support"

  	depends on PCI

  	help
  	  This option enables support for Pacific Digital Serial ATA QStor.
  
  	  If unsure, say N.

  config SATA_PROMISE

  	tristate "Promise SATA TX2/TX4 support"

  	depends on PCI

  	help
  	  This option enables support for Promise Serial ATA TX2/TX4.
  
  	  If unsure, say N.

  config SATA_SX4

  	tristate "Promise SATA SX4 support (Experimental)"

  	depends on PCI && EXPERIMENTAL

  	help
  	  This option enables support for Promise Serial ATA SX4.
  
  	  If unsure, say N.

  config SATA_SIL

  	tristate "Silicon Image SATA support"

  	depends on PCI

  	help
  	  This option enables support for Silicon Image Serial ATA.
  
  	  If unsure, say N.

  config SATA_SIS

  	tristate "SiS 964/965/966/180 SATA support"

  	depends on PCI

  	select PATA_SIS

  	help

  	  This option enables support for SiS Serial ATA on

  	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
  	  The PATA support for SiS 180 requires additionally to
  	  enable the PATA_SIS driver in the config.

  	  If unsure, say N.

  config SATA_ULI

  	tristate "ULi Electronics SATA support"

  	depends on PCI

  	help
  	  This option enables support for ULi Electronics SATA.
  
  	  If unsure, say N.

  config SATA_VIA

  	tristate "VIA SATA support"

  	depends on PCI

  	help
  	  This option enables support for VIA Serial ATA.
  
  	  If unsure, say N.

  config SATA_VITESSE

  	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"

  	depends on PCI

  	help
  	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
  
  	  If unsure, say N.

  config SATA_INIC162X

  	tristate "Initio 162x SATA support"
  	depends on PCI

  	help
  	  This option enables support for Initio 162x Serial ATA.

  config PATA_ACPI
  	tristate "ACPI firmware driver for PATA"
  	depends on ATA_ACPI
  	help
  	  This option enables an ACPI method driver which drives
  	  motherboard PATA controller interfaces through the ACPI
  	  firmware in the BIOS. This driver can sometimes handle
  	  otherwise unsupported hardware.

  config PATA_ALI

  	tristate "ALi PATA support"
  	depends on PCI

  	help
  	  This option enables support for the ALi ATA interfaces
  	  found on the many ALi chipsets.
  
  	  If unsure, say N.
  
  config PATA_AMD

  	tristate "AMD/NVidia PATA support"

  	depends on PCI
  	help
  	  This option enables support for the AMD and NVidia PATA
  	  interfaces found on the chipsets for Athlon/Athlon64.
  
  	  If unsure, say N.
  
  config PATA_ARTOP

  	tristate "ARTOP 6210/6260 PATA support"
  	depends on PCI

  	help
  	  This option enables support for ARTOP PATA controllers.
  
  	  If unsure, say N.

  config PATA_AT32
  	tristate "Atmel AVR32 PATA support (Experimental)"
  	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
  	help
  	  This option enables support for the IDE devices on the
  	  Atmel AT32AP platform.
  
  	  If unsure, say N.

  config PATA_ATIIXP

  	tristate "ATI PATA support"
  	depends on PCI

  	help
  	  This option enables support for the ATI ATA interfaces
  	  found on the many ATI chipsets.
  
  	  If unsure, say N.

  config PATA_CMD640_PCI

  	tristate "CMD640 PCI PATA support (Experimental)"

  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables support for the CMD640 PCI IDE
  	  interface chip. Only the primary channel is currently
  	  supported.
  
  	  If unsure, say N.

  config PATA_CMD64X

  	tristate "CMD64x PATA support"
  	depends on PCI

  	help
  	  This option enables support for the CMD64x series chips
  	  except for the CMD640.
  
  	  If unsure, say N.
  
  config PATA_CS5520
  	tristate "CS5510/5520 PATA support"
  	depends on PCI
  	help
  	  This option enables support for the Cyrix 5510/5520
  	  companion chip used with the MediaGX/Geode processor family.
  
  	  If unsure, say N.
  
  config PATA_CS5530

  	tristate "CS5530 PATA support"
  	depends on PCI

  	help
  	  This option enables support for the Cyrix/NatSemi/AMD CS5530
  	  companion chip used with the MediaGX/Geode processor family.
  
  	  If unsure, say N.
  
  config PATA_CS5535
  	tristate "CS5535 PATA support (Experimental)"
  	depends on PCI && X86 && !X86_64 && EXPERIMENTAL
  	help
  	  This option enables support for the NatSemi/AMD CS5535
  	  companion chip used with the Geode processor family.
  
  	  If unsure, say N.

  config PATA_CS5536

  	tristate "CS5536 PATA support"
  	depends on PCI && X86 && !X86_64

  	help
  	  This option enables support for the AMD CS5536
  	  companion chip used with the Geode LX processor family.
  
  	  If unsure, say N.

  config PATA_CYPRESS
  	tristate "Cypress CY82C693 PATA support (Very Experimental)"
  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables support for the Cypress/Contaq CY82C693
  	  chipset found in some Alpha systems
  
  	  If unsure, say N.
  
  config PATA_EFAR
  	tristate "EFAR SLC90E66 support"
  	depends on PCI
  	help
  	  This option enables support for the EFAR SLC90E66
  	  IDE controller found on some older machines.
  
  	  If unsure, say N.
  
  config ATA_GENERIC
  	tristate "Generic ATA support"
  	depends on PCI
  	help
  	  This option enables support for generic BIOS configured
  	  ATA controllers via the new ATA layer
  
  	  If unsure, say N.
  
  config PATA_HPT366

  	tristate "HPT 366/368 PATA support"
  	depends on PCI

  	help
  	  This option enables support for the HPT 366 and 368
  	  PATA controllers via the new ATA layer.
  
  	  If unsure, say N.
  
  config PATA_HPT37X

  	tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"

  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables support for the majority of the later HPT
  	  PATA controllers via the new ATA layer.
  
  	  If unsure, say N.
  
  config PATA_HPT3X2N

  	tristate "HPT 372N/302N PATA support (Experimental)"

  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables support for the N variant HPT PATA
  	  controllers via the new ATA layer
  
  	  If unsure, say N.
  
  config PATA_HPT3X3

  	tristate "HPT 343/363 PATA support"

  	depends on PCI
  	help
  	  This option enables support for the HPT 343/363
  	  PATA controllers via the new ATA layer
  
  	  If unsure, say N.

  config PATA_HPT3X3_DMA
  	bool "HPT 343/363 DMA support (Experimental)"
  	depends on PATA_HPT3X3
  	help
  	  This option enables DMA support for the HPT343/363
  	  controllers. Enable with care as there are still some
  	  problems with DMA on this chipset.

  config PATA_ISAPNP

  	tristate "ISA Plug and Play PATA support"
  	depends on ISAPNP

  	help
  	  This option enables support for ISA plug & play ATA
  	  controllers such as those found on old soundcards.
  
  	  If unsure, say N.

  config PATA_IT821X

  	tristate "IT8211/2 PATA support"
  	depends on PCI

  	help
  	  This option enables support for the ITE 8211 and 8212
  	  PATA controllers via the new ATA layer, including RAID
  	  mode.
  
  	  If unsure, say N.

  config PATA_IT8213
  	tristate "IT8213 PATA support (Experimental)"
  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables support for the ITE 821 PATA
            controllers via the new ATA layer.
  
  	  If unsure, say N.

  config PATA_JMICRON
  	tristate "JMicron PATA support"
  	depends on PCI
  	help
  	  Enable support for the JMicron IDE controller, via the new
  	  ATA layer.
  
  	  If unsure, say N.

  config PATA_LEGACY
  	tristate "Legacy ISA PATA support (Experimental)"

  	depends on ISA && EXPERIMENTAL

  	help
  	  This option enables support for ISA/VLB bus legacy PATA
  	  ports and allows them to be accessed via the new ATA layer.
  
  	  If unsure, say N.
  
  config PATA_TRIFLEX
  	tristate "Compaq Triflex PATA support"
  	depends on PCI
  	help
  	  Enable support for the Compaq 'Triflex' IDE controller as found
  	  on many Compaq Pentium-Pro systems, via the new ATA layer.
  
  	  If unsure, say N.

  config PATA_MARVELL
  	tristate "Marvell PATA support via legacy mode"
  	depends on PCI
  	help

  	  This option enables limited support for the Marvell 88SE61xx ATA
  	  controllers. If you wish to use only the SATA ports then select
  	  the AHCI driver alone. If you wish to the use the PATA port or
  	  both SATA and PATA include this driver.

  
  	  If unsure, say N.

  config PATA_MPC52xx
  	tristate "Freescale MPC52xx SoC internal IDE"

  	depends on PPC_MPC52xx && PPC_BESTCOMM
  	select PPC_BESTCOMM_ATA

  	help
  	  This option enables support for integrated IDE controller
  	  of the Freescale MPC52xx SoC.
  
  	  If unsure, say N.

  config PATA_MPIIX
  	tristate "Intel PATA MPIIX support"
  	depends on PCI
  	help
  	  This option enables support for MPIIX PATA support.
  
  	  If unsure, say N.
  
  config PATA_OLDPIIX

  	tristate "Intel PATA old PIIX support"
  	depends on PCI

  	help

  	  This option enables support for early PIIX PATA support.

  
  	  If unsure, say N.
  
  config PATA_NETCELL
  	tristate "NETCELL Revolution RAID support"
  	depends on PCI
  	help
  	  This option enables support for the Netcell Revolution RAID
  	  PATA controller.
  
  	  If unsure, say N.

  config PATA_NINJA32
  	tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables support for the Ninja32, Delkin and
  	  possibly other brands of Cardbus ATA adapter
  
  	  If unsure, say N.

  config PATA_NS87410

  	tristate "Nat Semi NS87410 PATA support"
  	depends on PCI

  	help
  	  This option enables support for the National Semiconductor
  	  NS87410 PCI-IDE controller.
  
  	  If unsure, say N.

  config PATA_NS87415

  	tristate "Nat Semi NS87415 PATA support"
  	depends on PCI

  	help
  	  This option enables support for the National Semiconductor
  	  NS87415 PCI-IDE controller.
  
  	  If unsure, say N.

  config PATA_OPTI
  	tristate "OPTI621/6215 PATA support (Very Experimental)"
  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables full PIO support for the early Opti ATA
  	  controllers found on some old motherboards.
  
  	  If unsure, say N.
  
  config PATA_OPTIDMA

  	tristate "OPTI FireStar PATA support (Very Experimental)"

  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables DMA/PIO support for the later OPTi
  	  controllers found on some old motherboards and in some

  	  laptops.

  
  	  If unsure, say N.
  
  config PATA_PCMCIA
  	tristate "PCMCIA PATA support"
  	depends on PCMCIA
  	help
  	  This option enables support for PCMCIA ATA interfaces, including
  	  compact flash card adapters via the new ATA layer.
  
  	  If unsure, say N.
  
  config PATA_PDC_OLD

  	tristate "Older Promise PATA controller support"
  	depends on PCI

  	help
  	  This option enables support for the Promise 20246, 20262, 20263,
  	  20265 and 20267 adapters.
  
  	  If unsure, say N.
  
  config PATA_QDI
  	tristate "QDI VLB PATA support"

  	depends on ISA

  	help
  	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
  
  config PATA_RADISYS

  	tristate "RADISYS 82600 PATA support (Experimental)"

  	depends on PCI && EXPERIMENTAL
  	help
  	  This option enables support for the RADISYS 82600
  	  PATA controllers via the new ATA layer
  
  	  If unsure, say N.

  config PATA_RB532
  	tristate "RouterBoard 532 PATA CompactFlash support"
  	depends on MIKROTIK_RB532

  	help

  	  This option enables support for the RouterBoard 532

  	  PATA CompactFlash controller.
  
  	  If unsure, say N.

  config PATA_RZ1000
  	tristate "PC Tech RZ1000 PATA support"
  	depends on PCI
  	help
  	  This option enables basic support for the PC Tech RZ1000/1
  	  PATA controllers via the new ATA layer
  
  	  If unsure, say N.
  
  config PATA_SC1200

  	tristate "SC1200 PATA support"
  	depends on PCI

  	help
  	  This option enables support for the NatSemi/AMD SC1200 SoC
  	  companion chip used with the Geode processor family.
  
  	  If unsure, say N.
  
  config PATA_SERVERWORKS

  	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
  	depends on PCI

  	help
  	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
  	  HT1000 PATA controllers, via the new ATA layer.
  
  	  If unsure, say N.
  
  config PATA_PDC2027X
  	tristate "Promise PATA 2027x support"
  	depends on PCI
  	help
  	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
  
  	  If unsure, say N.
  
  config PATA_SIL680
  	tristate "CMD / Silicon Image 680 PATA support"
  	depends on PCI
  	help
  	  This option enables support for CMD / Silicon Image 680 PATA.
  
  	  If unsure, say N.
  
  config PATA_SIS

  	tristate "SiS PATA support"
  	depends on PCI

  	help
  	  This option enables support for SiS PATA controllers
  
  	  If unsure, say N.
  
  config PATA_VIA
  	tristate "VIA PATA support"
  	depends on PCI
  	help
  	  This option enables support for the VIA PATA interfaces
  	  found on the many VIA chipsets.
  
  	  If unsure, say N.
  
  config PATA_WINBOND
  	tristate "Winbond SL82C105 PATA support"
  	depends on PCI
  	help
  	  This option enables support for SL82C105 PATA devices found in the
  	  Netwinder and some other systems
  
  	  If unsure, say N.

  config PATA_WINBOND_VLB
  	tristate "Winbond W83759A VLB PATA support (Experimental)"
  	depends on ISA && EXPERIMENTAL
  	help
  	  Support for the Winbond W83759A controller on Vesa Local Bus
  	  systems.

  config HAVE_PATA_PLATFORM
  	bool
  	help
  	  This is an internal configuration node for any machine that
  	  uses pata-platform driver to enable the relevant driver in the
  	  configuration structure without having to submit endless patches
  	  to update the PATA_PLATFORM entry.

  config PATA_PLATFORM
  	tristate "Generic platform device PATA support"

  	depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM

  	help
  	  This option enables support for generic directly connected ATA
  	  devices commonly found on embedded systems.
  
  	  If unsure, say N.

  
  config PATA_OF_PLATFORM
  	tristate "OpenFirmware platform device PATA support"
  	depends on PATA_PLATFORM && PPC_OF
  	help
  	  This option enables support for generic directly connected ATA
  	  devices commonly found on embedded systems with OpenFirmware
  	  bindings.
  
  	  If unsure, say N.

  config PATA_ICSIDE
  	tristate "Acorn ICS PATA support"
  	depends on ARM && ARCH_ACORN
  	help
  	  On Acorn systems, say Y here if you wish to use the ICS PATA
  	  interface card.  This is not required for ICS partition support.
  	  If you are unsure, say N to this.

  config PATA_IXP4XX_CF
  	tristate "IXP4XX Compact Flash support"
  	depends on ARCH_IXP4XX
  	help
  	  This option enables support for a Compact Flash connected on
  	  the ixp4xx expansion bus. This driver had been written for
  	  Loft/Avila boards in mind but can work with others.
  
  	  If unsure, say N.

  config PATA_OCTEON_CF
  	tristate "OCTEON Boot Bus Compact Flash support"
  	depends on CPU_CAVIUM_OCTEON
  	help
  	  This option enables a polled compact flash driver for use with
  	  compact flash cards attached to the OCTEON boot bus.
  
  	  If unsure, say N.

  config PATA_SCC
  	tristate "Toshiba's Cell Reference Set IDE support"

  	depends on PCI && PPC_CELLEB

  	help
  	  This option enables support for the built-in IDE controller on
  	  Toshiba Cell Reference Board.
  
  	  If unsure, say N.

  config PATA_SCH
  	tristate "Intel SCH PATA support"
  	depends on PCI
  	help
  	  This option enables support for Intel SCH PATA on the Intel
  	  SCH (US15W, US15L, UL11L) series host controllers.
  
  	  If unsure, say N.

  config PATA_BF54X
  	tristate "Blackfin 54x ATAPI support"
  	depends on BF542 || BF548 || BF549
  	help
  	  This option enables support for the built-in ATAPI controller on
  	  Blackfin 54x family chips.
  
  	  If unsure, say N.

  endif # ATA_SFF

  endif # ATA