# SPDX-License-Identifier: GPL-2.0

  
  menu "Bluetooth device drivers"
  	depends on BT

  config BT_INTEL
  	tristate

  	select REGMAP

  config BT_BCM
  	tristate

  	select FW_LOADER

  config BT_RTL
  	tristate
  	select FW_LOADER

  config BT_QCA
  	tristate
  	select FW_LOADER

  config BT_HCIBTUSB

  	tristate "HCI USB driver"
  	depends on USB

  	select BT_INTEL

  	help
  	  Bluetooth HCI USB driver.
  	  This driver is required if you want to use Bluetooth devices with
  	  USB interface.

  	  Say Y here to compile support for Bluetooth USB devices into the
  	  kernel or say M to compile it as module (btusb).

  config BT_HCIBTUSB_AUTOSUSPEND

  	bool "Enable USB autosuspend for Bluetooth USB devices by default"

  	depends on BT_HCIBTUSB
  	help
  	  Say Y here to enable USB autosuspend for Bluetooth USB devices by
  	  default.
  
  	  This can be overridden by passing btusb.enable_autosuspend=[y|n]
  	  on the kernel commandline.

  config BT_HCIBTUSB_BCM
  	bool "Broadcom protocol support"
  	depends on BT_HCIBTUSB
  	select BT_BCM
  	default y
  	help
  	  The Broadcom protocol support enables firmware and patchram
  	  download support for Broadcom Bluetooth controllers.
  
  	  Say Y here to compile support for Broadcom protocol.

  config BT_HCIBTUSB_MTK
  	bool "MediaTek protocol support"
  	depends on BT_HCIBTUSB
  	default n
  	help
  	  The MediaTek protocol support enables firmware download
  	  support and chip initialization for MediaTek Bluetooth
  	  USB controllers.
  
  	  Say Y here to compile support for MediaTek protocol.

  config BT_HCIBTUSB_RTL
  	bool "Realtek protocol support"
  	depends on BT_HCIBTUSB
  	select BT_RTL
  	default y
  	help
  	  The Realtek protocol support enables firmware and configuration
  	  download support for Realtek Bluetooth controllers.
  
  	  Say Y here to compile support for Realtek protocol.

  config BT_HCIBTSDIO
  	tristate "HCI SDIO driver"
  	depends on MMC
  	help
  	  Bluetooth HCI SDIO driver.
  	  This driver is required if you want to use Bluetooth device with
  	  SDIO interface.
  
  	  Say Y here to compile support for Bluetooth SDIO devices into the
  	  kernel or say M to compile it as module (btsdio).

  config BT_HCIUART
  	tristate "HCI UART driver"

  	depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS

  	depends on NVMEM || !NVMEM

  	depends on TTY

  	help
  	  Bluetooth HCI UART driver.
  	  This driver is required if you want to use Bluetooth devices with

  	  serial port interface. You will also need this driver if you have
  	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card

  	  adapter and BrainBoxes Bluetooth PC Card.
  
  	  Say Y here to compile support for Bluetooth UART devices into the
  	  kernel or say M to compile it as module (hci_uart).

  config BT_HCIUART_SERDEV
  	bool
  	depends on SERIAL_DEV_BUS && BT_HCIUART

  	default y

  config BT_HCIUART_H4
  	bool "UART (H4) protocol support"
  	depends on BT_HCIUART
  	help

  	  UART (H4) is serial protocol for communication between Bluetooth
  	  device and host. This protocol is required for most Bluetooth devices
  	  with UART interface, including PCMCIA and CF cards.

  
  	  Say Y here to compile support for HCI UART (H4) protocol.

  config BT_HCIUART_NOKIA
  	tristate "UART Nokia H4+ protocol support"
  	depends on BT_HCIUART

  	depends on BT_HCIUART_SERDEV

  	depends on GPIOLIB

  	depends on PM

  	select BT_HCIUART_H4

  	select BT_BCM

  	help
  	  Nokia H4+ is serial protocol for communication between Bluetooth
  	  device and host. This protocol is required for Bluetooth devices
  	  with UART interface in Nokia devices.
  
  	  Say Y here to compile support for Nokia's H4+ protocol.

  config BT_HCIUART_BCSP
  	bool "BCSP protocol support"
  	depends on BT_HCIUART

  	select BITREVERSE

  	help

  	  BCSP (BlueCore Serial Protocol) is serial protocol for communication

  	  between Bluetooth device and host. This protocol is required for non
  	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
  	  CF cards.
  
  	  Say Y here to compile support for HCI BCSP protocol.

  config BT_HCIUART_ATH3K
  	bool "Atheros AR300x serial support"
  	depends on BT_HCIUART

  	select BT_HCIUART_H4

  	help
  	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
  	  communication between host and Atheros AR300x Bluetooth devices.
  	  This protocol enables AR300x chips to be enabled with
  	  power management support.
  	  Enable this if you have Atheros AR300x serial Bluetooth device.
  
  	  Say Y here to compile support for HCI UART ATH3K protocol.

  config BT_HCIUART_LL
  	bool "HCILL protocol support"

  	depends on BT_HCIUART_SERDEV

  	select BT_HCIUART_H4

  	help
  	  HCILL (HCI Low Level) is a serial protocol for communication
  	  between Bluetooth device and host. This protocol is required for
  	  serial Bluetooth devices that are based on Texas Instruments'
  	  BRF chips.
  
  	  Say Y here to compile support for HCILL protocol.

  config BT_HCIUART_3WIRE
  	bool "Three-wire UART (H5) protocol support"
  	depends on BT_HCIUART

  	depends on BT_HCIUART_SERDEV

  	help
  	  The HCI Three-wire UART Transport Layer makes it possible to
  	  user the Bluetooth HCI over a serial port interface. The HCI
  	  Three-wire UART Transport Layer assumes that the UART
  	  communication may have bit errors, overrun errors or burst
  	  errors and thereby making CTS/RTS lines unnecessary.
  
  	  Say Y here to compile support for Three-wire UART protocol.

  config BT_HCIUART_INTEL
  	bool "Intel protocol support"
  	depends on BT_HCIUART

  	depends on GPIOLIB

  	select BT_HCIUART_H4

  	select BT_INTEL

  	help
  	  The Intel protocol support enables Bluetooth HCI over serial
  	  port interface for Intel Bluetooth controllers.
  
  	  Say Y here to compile support for Intel protocol.

  config BT_HCIUART_BCM
  	bool "Broadcom protocol support"
  	depends on BT_HCIUART

  	depends on BT_HCIUART_SERDEV

  	depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)

  	depends on GPIOLIB

  	select BT_HCIUART_H4

  	select BT_BCM

  	help
  	  The Broadcom protocol support enables Bluetooth HCI over serial
  	  port interface for Broadcom Bluetooth controllers.
  
  	  Say Y here to compile support for Broadcom protocol.

  config BT_HCIUART_RTL
  	bool "Realtek protocol support"
  	depends on BT_HCIUART
  	depends on BT_HCIUART_SERDEV
  	depends on GPIOLIB

  	depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)

  	select BT_HCIUART_3WIRE
  	select BT_RTL
  	help
  	  The Realtek protocol support enables Bluetooth HCI over 3-Wire

  	  serial port interface for Realtek Bluetooth controllers.

  
  	  Say Y here to compile support for Realtek protocol.

  config BT_HCIUART_QCA
  	bool "Qualcomm Atheros protocol support"
  	depends on BT_HCIUART

  	depends on BT_HCIUART_SERDEV

  	select BT_HCIUART_H4
  	select BT_QCA
  	help
  	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
  	  over serial port interface(H4) between controller and host.
  	  This protocol is required for UART clock control for QCA Bluetooth
  	  devices.
  
  	  Say Y here to compile support for QCA protocol.

  config BT_HCIUART_AG6XX
  	bool "Intel AG6XX protocol support"
  	depends on BT_HCIUART
  	select BT_HCIUART_H4
  	select BT_INTEL
  	help
  	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial
  	  port interface for Intel ibt 2.1 Bluetooth controllers.
  
  	  Say Y here to compile support for Intel AG6XX protocol.

  
  config BT_HCIUART_MRVL
  	bool "Marvell protocol support"
  	depends on BT_HCIUART

  	depends on BT_HCIUART_SERDEV

  	select BT_HCIUART_H4
  	help
  	  Marvell is serial protocol for communication between Bluetooth
  	  device and host. This protocol is required for most Marvell Bluetooth
  	  devices with UART interface.
  
  	  Say Y here to compile support for HCI MRVL protocol.

  config BT_HCIBCM203X
  	tristate "HCI BCM203x USB driver"
  	depends on USB
  	select FW_LOADER
  	help
  	  Bluetooth HCI BCM203x USB driver.
  	  This driver provides the firmware loading mechanism for the Broadcom
  	  Blutonium based devices.
  
  	  Say Y here to compile support for HCI BCM203x devices into the
  	  kernel or say M to compile it as module (bcm203x).
  
  config BT_HCIBPA10X
  	tristate "HCI BPA10x USB driver"

  	depends on USB

  	help
  	  Bluetooth HCI BPA10x USB driver.
  	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
  	  sniffer devices.
  
  	  Say Y here to compile support for HCI BPA10x devices into the
  	  kernel or say M to compile it as module (bpa10x).
  
  config BT_HCIBFUSB
  	tristate "HCI BlueFRITZ! USB driver"
  	depends on USB
  	select FW_LOADER
  	help
  	  Bluetooth HCI BlueFRITZ! USB driver.
  	  This driver provides support for Bluetooth USB devices with AVM
  	  interface:
  	     AVM BlueFRITZ! USB
  
  	  Say Y here to compile support for HCI BFUSB devices into the
  	  kernel or say M to compile it as module (bfusb).
  
  config BT_HCIDTL1
  	tristate "HCI DTL1 (PC Card) driver"
  	depends on PCMCIA
  	help
  	  Bluetooth HCI DTL1 (PC Card) driver.
  	  This driver provides support for Bluetooth PCMCIA devices with
  	  Nokia DTL1 interface:
  	     Nokia Bluetooth Card
  	     Socket Bluetooth CF Card
  
  	  Say Y here to compile support for HCI DTL1 devices into the
  	  kernel or say M to compile it as module (dtl1_cs).
  
  config BT_HCIBT3C
  	tristate "HCI BT3C (PC Card) driver"
  	depends on PCMCIA
  	select FW_LOADER
  	help
  	  Bluetooth HCI BT3C (PC Card) driver.
  	  This driver provides support for Bluetooth PCMCIA devices with
  	  3Com BT3C interface:
  	     3Com Bluetooth Card (3CRWB6096)
  	     HP Bluetooth Card
  
  	  Say Y here to compile support for HCI BT3C devices into the
  	  kernel or say M to compile it as module (bt3c_cs).
  
  config BT_HCIBLUECARD
  	tristate "HCI BlueCard (PC Card) driver"
  	depends on PCMCIA
  	help
  	  Bluetooth HCI BlueCard (PC Card) driver.
  	  This driver provides support for Bluetooth PCMCIA devices with
  	  Anycom BlueCard interface:
  	     Anycom Bluetooth PC Card
  	     Anycom Bluetooth CF Card
  
  	  Say Y here to compile support for HCI BlueCard devices into the
  	  kernel or say M to compile it as module (bluecard_cs).

  config BT_HCIVHCI
  	tristate "HCI VHCI (Virtual HCI device) driver"
  	help
  	  Bluetooth Virtual HCI device driver.
  	  This driver is required if you want to use HCI Emulation software.
  
  	  Say Y here to compile support for virtual HCI devices into the
  	  kernel or say M to compile it as module (hci_vhci).

  config BT_MRVL
  	tristate "Marvell Bluetooth driver support"

  	help
  	  The core driver to support Marvell Bluetooth devices.
  
  	  This driver is required if you want to support

  	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.

  
  	  Say Y here to compile Marvell Bluetooth driver
  	  into the kernel or say M to compile it as module.

  config BT_MRVL_SDIO
  	tristate "Marvell BT-over-SDIO driver"
  	depends on BT_MRVL && MMC

  	select FW_LOADER

  	select WANT_DEV_COREDUMP

  	help
  	  The driver for Marvell Bluetooth chipsets with SDIO interface.
  
  	  This driver is required if you want to use Marvell Bluetooth

  	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997

  	  chipsets are supported.

  
  	  Say Y here to compile support for Marvell BT-over-SDIO driver
  	  into the kernel or say M to compile it as module.

  config BT_ATH3K
  	tristate "Atheros firmware download driver"
  	depends on BT_HCIBTUSB
  	select FW_LOADER
  	help
  	  Bluetooth firmware download driver.
  	  This driver loads the firmware into the Atheros Bluetooth
  	  chipset.

  	  Say Y here to compile support for "Atheros firmware download driver"
  	  into the kernel or say M to compile it as module (ath3k).

  config BT_MTKSDIO
  	tristate "MediaTek HCI SDIO driver"
  	depends on MMC
  	help
  	  MediaTek Bluetooth HCI SDIO driver.
  	  This driver is required if you want to use MediaTek Bluetooth
  	  with SDIO interface.
  
  	  Say Y here to compile support for MediaTek Bluetooth SDIO devices
  	  into the kernel or say M to compile it as module (btmtksdio).

  config BT_MTKUART
  	tristate "MediaTek HCI UART driver"
  	depends on SERIAL_DEV_BUS
  	help
  	  MediaTek Bluetooth HCI UART driver.
  	  This driver is required if you want to use MediaTek Bluetooth
  	  with serial interface.
  
  	  Say Y here to compile support for MediaTek Bluetooth UART devices
  	  into the kernel or say M to compile it as module (btmtkuart).

  config BT_QCOMSMD
  	tristate "Qualcomm SMD based HCI support"

  	depends on RPMSG || (COMPILE_TEST && RPMSG=n)

  	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)

  	select BT_QCA
  	help
  	  Qualcomm SMD based HCI driver.
  	  This driver is used to bridge HCI data onto the shared memory
  	  channels to the WCNSS core.
  
  	  Say Y here to compile support for HCI over Qualcomm SMD into the
  	  kernel or say M to compile as a module.

  config BT_HCIRSI

  	tristate

  	help
  	  Redpine BT driver.
  	  This driver handles BT traffic from upper layers and pass
  	  to the RSI_91x coex module for further scheduling to device
  
  	  Say Y here to compile support for HCI over Redpine into the
  	  kernel or say M to compile as a module.

  endmenu