config ALPHA
  	bool
  	default y

  	select HAVE_AOUT

  	select HAVE_IDE

  	select HAVE_OPROFILE

  	select HAVE_SYSCALL_WRAPPERS

  	select HAVE_IRQ_WORK

  	select HAVE_PCSPKR_PLATFORM

  	select HAVE_PERF_EVENTS

  	select HAVE_DMA_ATTRS

  	select HAVE_GENERIC_HARDIRQS
  	select GENERIC_IRQ_PROBE
  	select AUTO_IRQ_AFFINITY if SMP

  	select GENERIC_IRQ_SHOW

  	select ARCH_WANT_OPTIONAL_GPIOLIB

  	select ARCH_HAVE_NMI_SAFE_CMPXCHG

  	help
  	  The Alpha is a 64-bit general-purpose processor designed and
  	  marketed by the Digital Equipment Corporation of blessed memory,
  	  now Hewlett-Packard.  The Alpha Linux project has a home page at
  	  <http://www.alphalinux.org/>.
  
  config 64BIT
  	def_bool y
  
  config MMU
  	bool
  	default y

  config RWSEM_GENERIC_SPINLOCK
  	bool
  
  config RWSEM_XCHGADD_ALGORITHM
  	bool
  	default y

  config ARCH_HAS_ILOG2_U32
  	bool
  	default n
  
  config ARCH_HAS_ILOG2_U64
  	bool
  	default n

  config GENERIC_CALIBRATE_DELAY
  	bool
  	default y

  config GENERIC_CMOS_UPDATE
          def_bool y

  config GENERIC_GPIO

  	bool

  config ZONE_DMA
  	bool
  	default y

  config ARCH_DMA_ADDR_T_64BIT
  	def_bool y

  config NEED_DMA_MAP_STATE
         def_bool y

  config NEED_SG_DMA_LENGTH
  	def_bool y

  config GENERIC_ISA_DMA
  	bool
  	default y

  source "init/Kconfig"

  source "kernel/Kconfig.freezer"

  
  
  menu "System setup"
  
  choice
  	prompt "Alpha system type"
  	default ALPHA_GENERIC
  	---help---
  	  This is the system type of your hardware.  A "generic" kernel will
  	  run on any supported Alpha system. However, if you configure a
  	  kernel for your specific system, it will be faster and smaller.
  
  	  To find out what type of Alpha system you have, you may want to
  	  check out the Linux/Alpha FAQ, accessible on the WWW from
  	  <http://www.alphalinux.org/>. In summary:

  	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366

  	  Alpha-XL            XL-233, XL-266
  	  AlphaBook1          Alpha laptop
  	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
  	  Cabriolet           AlphaPC64, AlphaPCI64

  	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L

  	  EB164               EB164 21164 evaluation board
  	  EB64+               EB64+ 21064 evaluation board
  	  EB66                EB66 21066 evaluation board
  	  EB66+               EB66+ 21066 evaluation board

  	  Jensen              DECpc 150, DEC 2000 models 300, 500

  	  LX164               AlphaPC164-LX
  	  Lynx                AS 2100A

  	  Miata               Personal Workstation 433/500/600 a/au

  	  Marvel              AlphaServer ES47 / ES80 / GS1280
  	  Mikasa              AS 1000
  	  Noname              AXPpci33, UDB (Multia)
  	  Noritake            AS 1000A, AS 600A, AS 800
  	  PC164               AlphaPC164
  	  Rawhide             AS 1200, AS 4000, AS 4100
  	  Ruffian             RPX164-2, AlphaPC164-UX, AlphaPC164-BX
  	  SX164               AlphaPC164-SX
  	  Sable               AS 2000, AS 2100

  	  Shark               DS 20L
  	  Takara              Takara (OEM)
  	  Titan               AlphaServer ES45 / DS25 / DS15

  	  Wildfire            AlphaServer GS 40/80/160/320
  
  	  If you don't know what to do, choose "generic".
  
  config ALPHA_GENERIC
  	bool "Generic"
  	help
  	  A generic kernel will run on all supported Alpha hardware.
  
  config ALPHA_ALCOR
  	bool "Alcor/Alpha-XLT"
  	help
  	  For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
  	  slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
  	  Address, CIA) - a 383 pin plastic PGA).  It provides a DRAM
  	  controller (256-bit memory bus) and a PCI interface.  It also does
  	  all the work required to support an external Bcache and to maintain
  	  memory coherence when a PCI device DMAs into (or out of) memory.
  
  config ALPHA_XL
  	bool "Alpha-XL"
  	help
  	  XL-233 and XL-266-based Alpha systems.
  
  config ALPHA_BOOK1
  	bool "AlphaBook1"
  	help
  	  Dec AlphaBook1/Burns Alpha-based laptops.
  
  config ALPHA_AVANTI_CH
  	bool "Avanti"
  
  config ALPHA_CABRIOLET
  	bool "Cabriolet"
  	help
  	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
  	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
  	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
  	  Bcache SIMMs.  Requires power supply with 3.3V output.
  
  config ALPHA_DP264
  	bool "DP264"
  	help
  	  Various 21264 systems with the tsunami core logic chipset.
  	  API Networks: 264DP, UP2000(+), CS20;
  	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
  
  config ALPHA_EB164
  	bool "EB164"
  	help
  	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
  	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
  	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
  	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
  	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
  	  motherboard.  Requires power supply with 3.3V output.
  
  config ALPHA_EB64P_CH
  	bool "EB64+"
  
  config ALPHA_EB66
  	bool "EB66"
  	help
  	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
  	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
  	  supply.  The EB66 schematic was published as a marketing poster
  	  advertising the 21066 as "the first microprocessor in the world with
  	  embedded PCI".
  
  config ALPHA_EB66P
  	bool "EB66+"
  	help
  	  Later variant of the EB66 board.
  
  config ALPHA_EIGER
  	bool "Eiger"
  	help
  	  Apparently an obscure OEM single-board computer based on the
  	  Typhoon/Tsunami chipset family. Information on it is scanty.
  
  config ALPHA_JENSEN
  	bool "Jensen"
  	help
  	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
  	  of the first-generation Alpha systems. A number of these systems
  	  seem to be available on the second- hand market. The Jensen is a
  	  floor-standing tower system which originally used a 150MHz 21064 It
  	  used programmable logic to interface a 486 EISA I/O bridge to the
  	  CPU.
  
  config ALPHA_LX164
  	bool "LX164"
  	help
  	  A technical overview of this board is available at
  	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
  
  config ALPHA_LYNX
  	bool "Lynx"
  	help
  	  AlphaServer 2100A-based systems.
  
  config ALPHA_MARVEL
  	bool "Marvel"
  	help
  	  AlphaServer ES47 / ES80 / GS1280 based on EV7.
  
  config ALPHA_MIATA
  	bool "Miata"
  	help
  	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,

  	  or 600au).

  
  config ALPHA_MIKASA
  	bool "Mikasa"
  	help
  	  AlphaServer 1000-based Alpha systems.
  
  config ALPHA_NAUTILUS
  	bool "Nautilus"
  	help
  	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
  
  config ALPHA_NONAME_CH
  	bool "Noname"
  
  config ALPHA_NORITAKE
  	bool "Noritake"
  	help
  	  AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
  	  systems.
  
  config ALPHA_PC164
  	bool "PC164"
  
  config ALPHA_P2K
  	bool "Platform2000"
  
  config ALPHA_RAWHIDE
  	bool "Rawhide"
  	help
  	  AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
  	  See HOWTO at
  	  <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
  
  config ALPHA_RUFFIAN
  	bool "Ruffian"
  	help
  	  Samsung APC164UX.  There is a page on known problems and workarounds
  	  at <http://www.alphalinux.org/faq/FAQ-11.html>.
  
  config ALPHA_RX164
  	bool "RX164"
  
  config ALPHA_SX164
  	bool "SX164"
  
  config ALPHA_SABLE
  	bool "Sable"
  	help
  	  Digital AlphaServer 2000 and 2100-based systems.
  
  config ALPHA_SHARK
  	bool "Shark"
  
  config ALPHA_TAKARA
  	bool "Takara"
  	help
  	  Alpha 11164-based OEM single-board computer.
  
  config ALPHA_TITAN
  	bool "Titan"
  	help
  	  AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
  
  config ALPHA_WILDFIRE
  	bool "Wildfire"
  	help
  	  AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
  
  endchoice
  
  # clear all implied options (don't want default values for those):
  # Most of these machines have ISA slots; not exactly sure which don't,
  # and this doesn't activate hordes of code, so do it always.
  config ISA
  	bool
  	default y
  	help
  	  Find out whether you have ISA slots on your motherboard.  ISA is the
  	  name of a bus system, i.e. the way the CPU talks to the other stuff
  	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
  	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
  	  newer boards don't support it.  If you have ISA, say Y, otherwise N.

  config ISA_DMA_API
  	bool
  	default y

  config PCI
  	bool
  	depends on !ALPHA_JENSEN

  	select GENERIC_PCI_IOMAP

  	default y
  	help
  	  Find out whether you have a PCI motherboard. PCI is the name of a
  	  bus system, i.e. the way the CPU talks to the other stuff inside
  	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
  	  VESA. If you have PCI, say Y, otherwise N.

  config PCI_DOMAINS
  	bool
  	default y

  config PCI_SYSCALL
  	def_bool PCI

  config IOMMU_HELPER
  	def_bool PCI

  config ALPHA_NONAME
  	bool
  	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
  	default y
  	help
  	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
  	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
  	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
  	  is a baby-AT size, and runs from a standard PC power supply. It has
  	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
  	  2 versions, with either PS/2 or large DIN connectors for the
  	  keyboard.
  
  config ALPHA_EV4
  	bool
  	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
  	default y if !ALPHA_LYNX
  
  config ALPHA_LCA
  	bool
  	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
  	default y
  
  config ALPHA_APECS
  	bool
  	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
  	default y
  
  config ALPHA_EB64P
  	bool
  	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
  	default y
  	help
  	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
  	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
  	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
  	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
  	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
  	  Runs from standard PC power supply.
  
  config ALPHA_EV5
  	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
  	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
  
  config ALPHA_EV4
  	bool
  	default y if ALPHA_LYNX && !ALPHA_EV5
  
  config ALPHA_CIA
  	bool
  	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
  	default y
  
  config ALPHA_EV56
  	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
  	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
  
  config ALPHA_EV56
  	prompt "EV56 CPU (speed >= 333MHz)?"

  	depends on ALPHA_NORITAKE || ALPHA_PRIMO

  
  config ALPHA_EV56
  	prompt "EV56 CPU (speed >= 400MHz)?"
  	depends on ALPHA_RAWHIDE
  
  config ALPHA_PRIMO
  	bool "EV5 CPU daughtercard (model 5/xxx)?"
  	depends on ALPHA_NORITAKE || ALPHA_MIKASA
  	help
  	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
  
  config ALPHA_GAMMA
  	bool "EV5 CPU(s) (model 5/xxx)?"
  	depends on ALPHA_SABLE
  	help
  	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
  
  config ALPHA_GAMMA
  	bool
  	depends on ALPHA_LYNX
  	default y
  
  config ALPHA_T2
  	bool
  	depends on ALPHA_SABLE || ALPHA_LYNX
  	default y
  
  config ALPHA_PYXIS
  	bool
  	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
  	default y
  
  config ALPHA_EV6
  	bool
  	depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
  	default y
  
  config ALPHA_TSUNAMI
  	bool
  	depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
  	default y
  
  config ALPHA_EV67
  	bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
  	default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
  	help
  	  Is this a machine based on the EV67 core?  If in doubt, select N here
  	  and the machine will be treated as an EV6.

  config ALPHA_MCPCIA
  	bool
  	depends on ALPHA_RAWHIDE
  	default y
  
  config ALPHA_POLARIS
  	bool
  	depends on ALPHA_RX164
  	default y
  
  config ALPHA_IRONGATE
  	bool
  	depends on ALPHA_NAUTILUS
  	default y

  config GENERIC_HWEIGHT
  	bool

  	default y if !ALPHA_EV67

  config ALPHA_AVANTI
  	bool
  	depends on ALPHA_XL || ALPHA_AVANTI_CH
  	default y
  	help
  	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
  	  Alphas. Info at
  	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
  
  config ALPHA_BROKEN_IRQ_MASK
  	bool
  	depends on ALPHA_GENERIC || ALPHA_PC164
  	default y

  config VGA_HOSE
  	bool
  	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI
  	default y
  	help
  	  Support VGA on an arbitrary hose; needed for several platforms
  	  which always have multiple hoses, and whose consoles support it.

  config ALPHA_SRM
  	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
  	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
  	---help---
  	  There are two different types of booting firmware on Alphas: SRM,
  	  which is command line driven, and ARC, which uses menus and arrow
  	  keys. Details about the Linux/Alpha booting process are contained in
  	  the Linux/Alpha FAQ, accessible on the WWW from
  	  <http://www.alphalinux.org/>.
  
  	  The usual way to load Linux on an Alpha machine is to use MILO
  	  (a bootloader that lets you pass command line parameters to the
  	  kernel just like lilo does for the x86 architecture) which can be
  	  loaded either from ARC or can be installed directly as a permanent
  	  firmware replacement from floppy (which requires changing a certain
  	  jumper on the motherboard). If you want to do either of these, say N
  	  here. If MILO doesn't work on your system (true for Jensen
  	  motherboards), you can bypass it altogether and boot Linux directly
  	  from an SRM console; say Y here in order to do that. Note that you
  	  won't be able to boot from an IDE disk using SRM.
  
  	  If unsure, say N.
  
  config EISA
  	bool
  	depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
  	default y

  config ARCH_MAY_HAVE_PC_FDC
  	def_bool y

  config SMP
  	bool "Symmetric multi-processing support"
  	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL

  	select USE_GENERIC_SMP_HELPERS

  	---help---
  	  This enables support for systems with more than one CPU. If you have
  	  a system with only one CPU, like most personal computers, say N. If
  	  you have a system with more than one CPU, say Y.
  
  	  If you say N here, the kernel will run on single and multiprocessor
  	  machines, but will use only one CPU of a multiprocessor machine. If
  	  you say Y here, the kernel will run on many, but not all,
  	  singleprocessor machines. On a singleprocessor machine, the kernel
  	  will run faster if you say N here.

  	  See also the SMP-HOWTO available at
  	  <http://www.tldp.org/docs.html#howto>.

  
  	  If you don't know what to do here, say N.
  
  config HAVE_DEC_LOCK
  	bool
  	depends on SMP
  	default y
  
  config NR_CPUS

  	int "Maximum number of CPUs (2-32)"
  	range 2 32

  	depends on SMP

  	default "32" if ALPHA_GENERIC || ALPHA_MARVEL
  	default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
  	help
  	  MARVEL support can handle a maximum of 32 CPUs, all the others
            with working support have a maximum of 4 CPUs.

  config ARCH_DISCONTIGMEM_ENABLE

  	bool "Discontiguous Memory Support (EXPERIMENTAL)"
  	depends on EXPERIMENTAL
  	help

  	  Say Y to support efficient handling of discontiguous physical memory,

  	  for architectures which are either NUMA (Non-Uniform Memory Access)
  	  or have huge holes in the physical address space for other reasons.
  	  See <file:Documentation/vm/numa> for more.

  source "mm/Kconfig"

  config NUMA
  	bool "NUMA Support (EXPERIMENTAL)"

  	depends on DISCONTIGMEM && BROKEN

  	help
  	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
  	  Access).  This option is for configuring high-end multiprocessor
  	  server machines.  If in doubt, say N.

  config NODES_SHIFT
  	int
  	default "7"
  	depends on NEED_MULTIPLE_NODES

  # LARGE_VMALLOC is racy, if you *really* need it then fix it first
  config ALPHA_LARGE_VMALLOC
  	bool
  	---help---
  	  Process creation and other aspects of virtual memory management can
  	  be streamlined if we restrict the kernel to one PGD for all vmalloc
  	  allocations.  This equates to about 8GB.
  
  	  Under normal circumstances, this is so far and above what is needed
  	  as to be laughable.  However, there are certain applications (such
  	  as benchmark-grade in-kernel web serving) that can make use of as
  	  much vmalloc space as is available.
  
  	  Say N unless you know you need gobs and gobs of vmalloc space.
  
  config VERBOSE_MCHECK
  	bool "Verbose Machine Checks"
  
  config VERBOSE_MCHECK_ON
  	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
  	depends on VERBOSE_MCHECK
  	default 1
  	---help---
  	  This option allows the default printing mode to be set, and then
  	  possibly overridden by a boot command argument.
  
  	  For example, if one wanted the option of printing verbose
  	  machine checks, but wanted the default to be as if verbose
  	  machine check printing was turned off, then one would choose
  	  the printing mode to be 0. Then, upon reboot, one could add
  	  the boot command line "verbose_mcheck=1" to get the normal
  	  verbose machine check printing, or "verbose_mcheck=2" to get
  	  the maximum information available.
  
  	  Take the default (1) unless you want more control or more info.

  config HZ
  	int
  	default 1200 if ALPHA_RAWHIDE
  	default 1024

  source "drivers/pci/Kconfig"
  source "drivers/eisa/Kconfig"
  
  source "drivers/pcmcia/Kconfig"
  
  config SRM_ENV
  	tristate "SRM environment through procfs"
  	depends on PROC_FS
  	---help---
  	  If you enable this option, a subdirectory inside /proc called
  	  /proc/srm_environment will give you access to the all important
  	  SRM environment variables (those which have a name) and also
  	  to all others (by their internal number).
  
  	  SRM is something like a BIOS for Alpha machines. There are some
  	  other such BIOSes, like AlphaBIOS, which this driver cannot
  	  support (hey, that's not SRM!).
  
  	  Despite the fact that this driver doesn't work on all Alphas (but
  	  only on those which have SRM as their firmware), it's save to
  	  build it even if your particular machine doesn't know about SRM
  	  (or if you intend to compile a generic kernel). It will simply
  	  not create those subdirectory in /proc (and give you some warning,
  	  of course).
  
  	  This driver is also available as a module and will be called
  	  srm_env then.
  
  source "fs/Kconfig.binfmt"
  
  endmenu

  source "net/Kconfig"

  source "drivers/Kconfig"
  
  source "fs/Kconfig"

  source "arch/alpha/Kconfig.debug"

  # DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
  # but we also need it if VGA_HOSE is set
  config DUMMY_CONSOLE
  	bool
  	depends on VGA_HOSE
  	default y

  source "security/Kconfig"
  
  source "crypto/Kconfig"
  
  source "lib/Kconfig"