/*

   * Copyright 2004-2009 Analog Devices Inc.
   *                2005 National ICT Australia (NICTA)
   *                      Aidan Williams <aidan@nicta.com.au>

   *

   * Licensed under the GPL-2 or later.

   */
  
  #include <linux/device.h>

  #include <linux/export.h>

  #include <linux/platform_device.h>
  #include <linux/mtd/mtd.h>
  #include <linux/mtd/partitions.h>

  #include <linux/mtd/physmap.h>

  #include <linux/spi/spi.h>
  #include <linux/spi/flash.h>

  #include <linux/i2c.h>

  #include <linux/irq.h>
  #include <linux/interrupt.h>

  #include <linux/usb/musb.h>

  #include <linux/leds.h>
  #include <linux/input.h>

  #include <asm/dma.h>
  #include <asm/bfin5xx_spi.h>
  #include <asm/reboot.h>

  #include <asm/nand.h>

  #include <asm/portmux.h>

  #include <asm/dpmc.h>

  #include <linux/spi/ad7877.h>

  #include <asm/bfin_sport.h>

  
  /*
   * Name the Board for the /proc/cpuinfo
   */

  #ifdef CONFIG_BFIN527_EZKIT_V2
  const char bfin_board_name[] = "ADI BF527-EZKIT V2";
  #else

  const char bfin_board_name[] = "ADI BF527-EZKIT";

  #endif

  
  /*
   *  Driver needs to know address, irq and flag pin.
   */

  #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)

  #include <linux/usb/isp1760.h>
  static struct resource bfin_isp1760_resources[] = {

  	[0] = {

  		.start  = 0x203C0000,
  		.end    = 0x203C0000 + 0x000fffff,

  		.flags  = IORESOURCE_MEM,
  	},
  	[1] = {

  		.start  = IRQ_PF7,
  		.end    = IRQ_PF7,

  		.flags  = IORESOURCE_IRQ,
  	},
  };

  static struct isp1760_platform_data isp1760_priv = {
  	.is_isp1761 = 0,

  	.bus_width_16 = 1,
  	.port1_otg = 0,
  	.analog_oc = 0,
  	.dack_polarity_high = 0,
  	.dreq_polarity_high = 0,

  };

  static struct platform_device bfin_isp1760_device = {

  	.name           = "isp1760",

  	.id             = 0,
  	.dev = {
  		.platform_data = &isp1760_priv,
  	},
  	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  	.resource       = bfin_isp1760_resources,

  };

  #endif

  #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  static struct resource musb_resources[] = {
  	[0] = {
  		.start	= 0xffc03800,
  		.end	= 0xffc03cff,
  		.flags	= IORESOURCE_MEM,
  	},
  	[1] = {	/* general IRQ */
  		.start	= IRQ_USB_INT0,
  		.end	= IRQ_USB_INT0,
  		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,

  		.name	= "mc"

  	},
  	[2] = {	/* DMA IRQ */
  		.start	= IRQ_USB_DMA,
  		.end	= IRQ_USB_DMA,
  		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,

  		.name	= "dma"

  	},
  };

  static struct musb_hdrc_config musb_config = {
  	.multipoint	= 0,
  	.dyn_fifo	= 0,
  	.soft_con	= 1,
  	.dma		= 1,

  	.num_eps	= 8,
  	.dma_channels	= 8,

  	.gpio_vrsel	= GPIO_PG13,

  	/* Some custom boards need to be active low, just set it to "0"
  	 * if it is the case.
  	 */
  	.gpio_vrsel_active	= 1,

  	.clkin          = 24,           /* musb CLKIN in MHZ */

  };

  static struct musb_hdrc_platform_data musb_plat = {
  #if defined(CONFIG_USB_MUSB_OTG)
  	.mode		= MUSB_OTG,
  #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
  	.mode		= MUSB_HOST,
  #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
  	.mode		= MUSB_PERIPHERAL,
  #endif

  	.config		= &musb_config,

  };
  
  static u64 musb_dmamask = ~(u32)0;
  
  static struct platform_device musb_device = {

  	.name		= "musb-blackfin",

  	.id		= 0,
  	.dev = {
  		.dma_mask		= &musb_dmamask,
  		.coherent_dma_mask	= 0xffffffff,
  		.platform_data		= &musb_plat,
  	},
  	.num_resources	= ARRAY_SIZE(musb_resources),
  	.resource	= musb_resources,
  };
  #endif
  
  #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
  
  static struct resource bf52x_t350mcqb_resources[] = {
  	{
  		.start = IRQ_PPI_ERROR,
  		.end = IRQ_PPI_ERROR,
  		.flags = IORESOURCE_IRQ,
  	},
  };
  
  static struct platform_device bf52x_t350mcqb_device = {
  	.name		= "bfin-t350mcqb",
  	.id		= -1,
  	.num_resources 	= ARRAY_SIZE(bf52x_t350mcqb_resources),
  	.resource 	= bf52x_t350mcqb_resources,
  };
  #endif

  #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
  #include <asm/bfin-lq035q1.h>
  
  static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
  	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,

  	.ppi_mode = USE_RGB565_8_BIT_PPI,

  };
  
  static struct resource bfin_lq035q1_resources[] = {
  	{
  		.start = IRQ_PPI_ERROR,
  		.end = IRQ_PPI_ERROR,
  		.flags = IORESOURCE_IRQ,
  	},
  };
  
  static struct platform_device bfin_lq035q1_device = {
  	.name		= "bfin-lq035q1",
  	.id		= -1,
  	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
  	.resource	= bfin_lq035q1_resources,
  	.dev		= {
  		.platform_data = &bfin_lq035q1_data,
  	},
  };
  #endif

  #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
  static struct mtd_partition ezkit_partitions[] = {
  	{

  		.name       = "bootloader(nor)",

  		.size       = 0x40000,
  		.offset     = 0,
  	}, {

  		.name       = "linux kernel(nor)",

  		.size       = 0x1C0000,
  		.offset     = MTDPART_OFS_APPEND,
  	}, {

  		.name       = "file system(nor)",

  		.size       = MTDPART_SIZ_FULL,
  		.offset     = MTDPART_OFS_APPEND,
  	}
  };
  
  static struct physmap_flash_data ezkit_flash_data = {
  	.width      = 2,
  	.parts      = ezkit_partitions,
  	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
  };
  
  static struct resource ezkit_flash_resource = {
  	.start = 0x20000000,
  	.end   = 0x203fffff,
  	.flags = IORESOURCE_MEM,
  };
  
  static struct platform_device ezkit_flash_device = {
  	.name          = "physmap-flash",
  	.id            = 0,
  	.dev = {
  		.platform_data = &ezkit_flash_data,
  	},
  	.num_resources = 1,
  	.resource      = &ezkit_flash_resource,
  };
  #endif

  #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
  static struct mtd_partition partition_info[] = {
  	{

  		.name = "bootloader(nand)",

  		.offset = 0,

  		.size = 0x40000,
  	}, {
  		.name = "linux kernel(nand)",
  		.offset = MTDPART_OFS_APPEND,

  		.size = 4 * 1024 * 1024,

  	},
  	{

  		.name = "file system(nand)",

  		.offset = MTDPART_OFS_APPEND,
  		.size = MTDPART_SIZ_FULL,

  	},
  };
  
  static struct bf5xx_nand_platform bf5xx_nand_platform = {

  	.data_width = NFC_NWIDTH_8,
  	.partitions = partition_info,
  	.nr_partitions = ARRAY_SIZE(partition_info),
  	.rd_dly = 3,
  	.wr_dly = 3,
  };
  
  static struct resource bf5xx_nand_resources[] = {
  	{
  		.start = NFC_CTL,
  		.end = NFC_DATA_RD + 2,
  		.flags = IORESOURCE_MEM,
  	},
  	{
  		.start = CH_NFC,
  		.end = CH_NFC,
  		.flags = IORESOURCE_IRQ,
  	},
  };
  
  static struct platform_device bf5xx_nand_device = {
  	.name = "bf5xx-nand",
  	.id = 0,
  	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
  	.resource = bf5xx_nand_resources,
  	.dev = {
  		.platform_data = &bf5xx_nand_platform,
  	},
  };
  #endif

  #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
  static struct resource bfin_pcmcia_cf_resources[] = {
  	{
  		.start = 0x20310000, /* IO PORT */
  		.end = 0x20312000,
  		.flags = IORESOURCE_MEM,
  	}, {
  		.start = 0x20311000, /* Attribute Memory */
  		.end = 0x20311FFF,
  		.flags = IORESOURCE_MEM,
  	}, {
  		.start = IRQ_PF4,
  		.end = IRQ_PF4,
  		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
  	}, {
  		.start = 6, /* Card Detect PF6 */
  		.end = 6,
  		.flags = IORESOURCE_IRQ,
  	},
  };
  
  static struct platform_device bfin_pcmcia_cf_device = {
  	.name = "bfin_cf_pcmcia",
  	.id = -1,
  	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
  	.resource = bfin_pcmcia_cf_resources,
  };
  #endif
  
  #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
  static struct platform_device rtc_device = {
  	.name = "rtc-bfin",
  	.id   = -1,
  };
  #endif
  
  #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)

  #include <linux/smc91x.h>
  
  static struct smc91x_platdata smc91x_info = {
  	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
  	.leda = RPC_LED_100_10,
  	.ledb = RPC_LED_TX_RX,
  };

  static struct resource smc91x_resources[] = {
  	{
  		.name = "smc91x-regs",
  		.start = 0x20300300,
  		.end = 0x20300300 + 16,
  		.flags = IORESOURCE_MEM,
  	}, {
  
  		.start = IRQ_PF7,
  		.end = IRQ_PF7,
  		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  	},
  };
  static struct platform_device smc91x_device = {
  	.name = "smc91x",
  	.id = 0,
  	.num_resources = ARRAY_SIZE(smc91x_resources),
  	.resource = smc91x_resources,

  	.dev	= {
  		.platform_data	= &smc91x_info,
  	},

  };
  #endif
  
  #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
  static struct resource dm9000_resources[] = {
  	[0] = {
  		.start	= 0x203FB800,

  		.end	= 0x203FB800 + 1,

  		.flags	= IORESOURCE_MEM,
  	},
  	[1] = {

  		.start	= 0x203FB800 + 4,
  		.end	= 0x203FB800 + 5,
  		.flags	= IORESOURCE_MEM,
  	},
  	[2] = {

  		.start	= IRQ_PF9,
  		.end	= IRQ_PF9,
  		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
  	},
  };
  
  static struct platform_device dm9000_device = {
  	.name		= "dm9000",
  	.id		= -1,
  	.num_resources	= ARRAY_SIZE(dm9000_resources),
  	.resource	= dm9000_resources,
  };
  #endif

  #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)

  #include <linux/bfin_mac.h>
  static const unsigned short bfin_mac_peripherals[] = P_RMII0;
  
  static struct bfin_phydev_platform_data bfin_phydev_data[] = {
  	{
  		.addr = 1,
  		.irq = IRQ_MAC_PHYINT,
  	},
  };
  
  static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
  	.phydev_number = 1,
  	.phydev_data = bfin_phydev_data,
  	.phy_mode = PHY_INTERFACE_MODE_RMII,
  	.mac_peripherals = bfin_mac_peripherals,
  };

  static struct platform_device bfin_mii_bus = {
  	.name = "bfin_mii_bus",

  	.dev = {
  		.platform_data = &bfin_mii_bus_data,
  	}

  };

  static struct platform_device bfin_mac_device = {
  	.name = "bfin_mac",

  	.dev = {
  		.platform_data = &bfin_mii_bus,
  	}

  };
  #endif
  
  #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
  static struct resource net2272_bfin_resources[] = {
  	{
  		.start = 0x20300000,
  		.end = 0x20300000 + 0x100,
  		.flags = IORESOURCE_MEM,
  	}, {

  		.start = 1,
  		.flags = IORESOURCE_BUS,
  	}, {

  		.start = IRQ_PF7,
  		.end = IRQ_PF7,
  		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  	},
  };
  
  static struct platform_device net2272_bfin_device = {
  	.name = "net2272",
  	.id = -1,
  	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
  	.resource = net2272_bfin_resources,
  };
  #endif

  #if defined(CONFIG_MTD_M25P80) \
  	|| defined(CONFIG_MTD_M25P80_MODULE)
  static struct mtd_partition bfin_spi_flash_partitions[] = {
  	{

  		.name = "bootloader(spi)",

  		.size = 0x00040000,

  		.offset = 0,
  		.mask_flags = MTD_CAP_ROM
  	}, {

  		.name = "linux kernel(spi)",

  		.size = MTDPART_SIZ_FULL,
  		.offset = MTDPART_OFS_APPEND,

  	}
  };
  
  static struct flash_platform_data bfin_spi_flash_data = {
  	.name = "m25p80",
  	.parts = bfin_spi_flash_partitions,
  	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),

  	.type = "m25p16",

  };
  
  /* SPI flash chip (m25p64) */
  static struct bfin5xx_spi_chip spi_flash_chip_info = {
  	.enable_dma = 0,         /* use dma transfer with this chip*/

  };
  #endif

  #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
  static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
  	.enable_dma = 0,

  };
  #endif

  #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

  static const struct ad7877_platform_data bfin_ad7877_ts_info = {
  	.model			= 7877,
  	.vref_delay_usecs	= 50,	/* internal, no capacitor */
  	.x_plate_ohms		= 419,
  	.y_plate_ohms		= 486,
  	.pressure_max		= 1000,
  	.pressure_min		= 0,
  	.stopacq_polarity 	= 1,
  	.first_conversion_delay = 3,
  	.acquisition_time 	= 1,
  	.averaging 		= 1,
  	.pen_down_acc_interval 	= 1,
  };
  #endif

  #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
  #include <linux/spi/ad7879.h>
  static const struct ad7879_platform_data bfin_ad7879_ts_info = {
  	.model			= 7879,	/* Model = AD7879 */
  	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
  	.pressure_max		= 10000,
  	.pressure_min		= 0,
  	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
  	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
  	.median			= 2,	/* do 8 measurements */
  	.averaging 		= 1,	/* take the average of 4 middle samples */
  	.pen_down_acc_interval 	= 255,	/* 9.4 ms */

  	.gpio_export		= 0,	/* Export GPIO to gpiolib */

  };
  #endif

  #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
  	defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
  
  static const u16 bfin_snd_pin[][7] = {
  	{P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
  		P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
  	{P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
  		P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
  };
  
  static struct bfin_snd_platform_data bfin_snd_data[] = {
  	{
  		.pin_req = &bfin_snd_pin[0][0],
  	},
  	{
  		.pin_req = &bfin_snd_pin[1][0],
  	},
  };
  
  #define BFIN_SND_RES(x) \
  	[x] = { \
  		{ \
  			.start = SPORT##x##_TCR1, \
  			.end = SPORT##x##_TCR1, \
  			.flags = IORESOURCE_MEM \
  		}, \
  		{ \
  			.start = CH_SPORT##x##_RX, \
  			.end = CH_SPORT##x##_RX, \
  			.flags = IORESOURCE_DMA, \
  		}, \
  		{ \
  			.start = CH_SPORT##x##_TX, \
  			.end = CH_SPORT##x##_TX, \
  			.flags = IORESOURCE_DMA, \
  		}, \
  		{ \
  			.start = IRQ_SPORT##x##_ERROR, \
  			.end = IRQ_SPORT##x##_ERROR, \
  			.flags = IORESOURCE_IRQ, \
  		} \
  	}
  
  static struct resource bfin_snd_resources[][4] = {
  	BFIN_SND_RES(0),
  	BFIN_SND_RES(1),
  };

  #endif
  
  #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
  static struct platform_device bfin_i2s_pcm = {
  	.name = "bfin-i2s-pcm-audio",
  	.id = -1,
  };
  #endif

  #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
  static struct platform_device bfin_tdm_pcm = {
  	.name = "bfin-tdm-pcm-audio",
  	.id = -1,
  };
  #endif
  
  #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
  static struct platform_device bfin_ac97_pcm = {
  	.name = "bfin-ac97-pcm-audio",

  	.id = -1,
  };
  #endif

  #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
  static struct platform_device bfin_i2s = {
  	.name = "bfin-i2s",
  	.id = CONFIG_SND_BF5XX_SPORT_NUM,

  	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
  	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
  	.dev = {
  		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
  	},

  };
  #endif
  
  #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
  static struct platform_device bfin_tdm = {
  	.name = "bfin-tdm",
  	.id = CONFIG_SND_BF5XX_SPORT_NUM,

  	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
  	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
  	.dev = {
  		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
  	},

  };
  #endif

  static struct spi_board_info bfin_spi_board_info[] __initdata = {
  #if defined(CONFIG_MTD_M25P80) \
  	|| defined(CONFIG_MTD_M25P80_MODULE)
  	{
  		/* the modalias must be the same as spi device driver name */
  		.modalias = "m25p80", /* Name of spi_driver for this device */
  		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
  		.bus_num = 0, /* Framework bus number */
  		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
  		.platform_data = &bfin_spi_flash_data,
  		.controller_data = &spi_flash_chip_info,
  		.mode = SPI_MODE_3,
  	},
  #endif

  #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
  	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)

  	{

  		.modalias = "ad183x",

  		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
  		.bus_num = 0,

  		.chip_select = 4,

  		.platform_data = "ad1836",

  		.mode = SPI_MODE_3,

  	},
  #endif

  #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
  	{
  		.modalias = "mmc_spi",
  		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
  		.bus_num = 0,
  		.chip_select = 3,
  		.controller_data = &mmc_spi_chip_info,
  		.mode = SPI_MODE_0,
  	},
  #endif

  #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
  	{
  		.modalias		= "ad7877",
  		.platform_data		= &bfin_ad7877_ts_info,

  		.irq			= IRQ_PF8,

  		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */

  		.bus_num	= 0,

  		.chip_select  = 2,

  	},
  #endif

  #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
  	{
  		.modalias = "ad7879",
  		.platform_data = &bfin_ad7879_ts_info,
  		.irq = IRQ_PF8,
  		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
  		.bus_num = 0,
  		.chip_select = 3,

  		.mode = SPI_CPHA | SPI_CPOL,
  	},
  #endif

  #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
  	{
  		.modalias = "spidev",
  		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
  		.bus_num = 0,
  		.chip_select = 1,

  	},
  #endif

  #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
  	{
  		.modalias = "bfin-lq035q1-spi",
  		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
  		.bus_num = 0,
  		.chip_select = 7,

  		.mode = SPI_CPHA | SPI_CPOL,
  	},
  #endif

  };

  #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)

  /* SPI controller data */
  static struct bfin5xx_spi_master bfin_spi0_info = {
  	.num_chipselect = 8,
  	.enable_dma = 1,  /* master has the ability to do dma transfer */

  	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},

  };
  
  /* SPI (0) */
  static struct resource bfin_spi0_resource[] = {
  	[0] = {
  		.start = SPI0_REGBASE,
  		.end   = SPI0_REGBASE + 0xFF,
  		.flags = IORESOURCE_MEM,
  		},
  	[1] = {
  		.start = CH_SPI,
  		.end   = CH_SPI,

  		.flags = IORESOURCE_DMA,
  	},
  	[2] = {
  		.start = IRQ_SPI,
  		.end   = IRQ_SPI,

  		.flags = IORESOURCE_IRQ,
  	},
  };
  
  static struct platform_device bfin_spi0_device = {
  	.name = "bfin-spi",
  	.id = 0, /* Bus number */
  	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
  	.resource = bfin_spi0_resource,
  	.dev = {
  		.platform_data = &bfin_spi0_info, /* Passed to driver */
  	},
  };
  #endif  /* spi master and devices */

  #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)

  #ifdef CONFIG_SERIAL_BFIN_UART0

  static struct resource bfin_uart0_resources[] = {

  	{

  		.start = UART0_THR,
  		.end = UART0_GCTL+2,

  		.flags = IORESOURCE_MEM,
  	},

  	{

  		.start = IRQ_UART0_TX,
  		.end = IRQ_UART0_TX,
  		.flags = IORESOURCE_IRQ,
  	},
  	{

  		.start = IRQ_UART0_RX,

  		.end = IRQ_UART0_RX,

  		.flags = IORESOURCE_IRQ,
  	},
  	{
  		.start = IRQ_UART0_ERROR,
  		.end = IRQ_UART0_ERROR,
  		.flags = IORESOURCE_IRQ,
  	},
  	{
  		.start = CH_UART0_TX,
  		.end = CH_UART0_TX,
  		.flags = IORESOURCE_DMA,
  	},
  	{
  		.start = CH_UART0_RX,
  		.end = CH_UART0_RX,
  		.flags = IORESOURCE_DMA,
  	},
  };

  static unsigned short bfin_uart0_peripherals[] = {

  	P_UART0_TX, P_UART0_RX, 0
  };
  
  static struct platform_device bfin_uart0_device = {
  	.name = "bfin-uart",
  	.id = 0,
  	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
  	.resource = bfin_uart0_resources,
  	.dev = {
  		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
  	},
  };

  #endif
  #ifdef CONFIG_SERIAL_BFIN_UART1

  static struct resource bfin_uart1_resources[] = {

  	{

  		.start = UART1_THR,
  		.end = UART1_GCTL+2,

  		.flags = IORESOURCE_MEM,
  	},

  	{

  		.start = IRQ_UART1_TX,
  		.end = IRQ_UART1_TX,
  		.flags = IORESOURCE_IRQ,
  	},
  	{

  		.start = IRQ_UART1_RX,

  		.end = IRQ_UART1_RX,

  		.flags = IORESOURCE_IRQ,
  	},
  	{
  		.start = IRQ_UART1_ERROR,
  		.end = IRQ_UART1_ERROR,
  		.flags = IORESOURCE_IRQ,
  	},
  	{
  		.start = CH_UART1_TX,
  		.end = CH_UART1_TX,
  		.flags = IORESOURCE_DMA,
  	},
  	{
  		.start = CH_UART1_RX,
  		.end = CH_UART1_RX,
  		.flags = IORESOURCE_DMA,
  	},
  #ifdef CONFIG_BFIN_UART1_CTSRTS
  	{	/* CTS pin */
  		.start = GPIO_PF9,
  		.end = GPIO_PF9,
  		.flags = IORESOURCE_IO,
  	},
  	{	/* RTS pin */
  		.start = GPIO_PF10,
  		.end = GPIO_PF10,
  		.flags = IORESOURCE_IO,
  	},

  #endif
  };

  static unsigned short bfin_uart1_peripherals[] = {

  	P_UART1_TX, P_UART1_RX, 0
  };
  
  static struct platform_device bfin_uart1_device = {

  	.name = "bfin-uart",
  	.id = 1,

  	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
  	.resource = bfin_uart1_resources,
  	.dev = {
  		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
  	},

  };
  #endif

  #endif

  #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)

  #ifdef CONFIG_BFIN_SIR0

  static struct resource bfin_sir0_resources[] = {

  	{
  		.start = 0xFFC00400,
  		.end = 0xFFC004FF,
  		.flags = IORESOURCE_MEM,
  	},

  	{
  		.start = IRQ_UART0_RX,
  		.end = IRQ_UART0_RX+1,
  		.flags = IORESOURCE_IRQ,
  	},
  	{
  		.start = CH_UART0_RX,
  		.end = CH_UART0_RX+1,
  		.flags = IORESOURCE_DMA,
  	},
  };
  
  static struct platform_device bfin_sir0_device = {
  	.name = "bfin_sir",
  	.id = 0,
  	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
  	.resource = bfin_sir0_resources,
  };

  #endif
  #ifdef CONFIG_BFIN_SIR1

  static struct resource bfin_sir1_resources[] = {

  	{
  		.start = 0xFFC02000,
  		.end = 0xFFC020FF,
  		.flags = IORESOURCE_MEM,
  	},

  	{
  		.start = IRQ_UART1_RX,
  		.end = IRQ_UART1_RX+1,
  		.flags = IORESOURCE_IRQ,
  	},
  	{
  		.start = CH_UART1_RX,
  		.end = CH_UART1_RX+1,
  		.flags = IORESOURCE_DMA,
  	},

  };

  static struct platform_device bfin_sir1_device = {

  	.name = "bfin_sir",

  	.id = 1,
  	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
  	.resource = bfin_sir1_resources,

  };
  #endif

  #endif

  #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
  static struct resource bfin_twi0_resource[] = {
  	[0] = {
  		.start = TWI0_REGBASE,
  		.end   = TWI0_REGBASE,
  		.flags = IORESOURCE_MEM,
  	},
  	[1] = {
  		.start = IRQ_TWI,
  		.end   = IRQ_TWI,
  		.flags = IORESOURCE_IRQ,
  	},
  };
  
  static struct platform_device i2c_bfin_twi_device = {
  	.name = "i2c-bfin-twi",
  	.id = 0,
  	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
  	.resource = bfin_twi0_resource,
  };
  #endif

  #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
  #include <linux/mfd/adp5520.h>
  
  	/*
  	 *  ADP5520/5501 LEDs Data
  	 */
  
  static struct led_info adp5520_leds[] = {
  	{
  		.name = "adp5520-led1",
  		.default_trigger = "none",
  		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
  	},
  };
  
  static struct adp5520_leds_platform_data adp5520_leds_data = {
  	.num_leds = ARRAY_SIZE(adp5520_leds),
  	.leds = adp5520_leds,
  	.fade_in = ADP5520_FADE_T_600ms,
  	.fade_out = ADP5520_FADE_T_600ms,
  	.led_on_time = ADP5520_LED_ONT_600ms,
  };
  
  	/*
  	 *  ADP5520 Keypad Data
  	 */
  
  static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
  	[ADP5520_KEY(3, 3)]	= KEY_1,
  	[ADP5520_KEY(2, 3)]	= KEY_2,
  	[ADP5520_KEY(1, 3)]	= KEY_3,
  	[ADP5520_KEY(0, 3)]	= KEY_UP,
  	[ADP5520_KEY(3, 2)]	= KEY_4,
  	[ADP5520_KEY(2, 2)]	= KEY_5,
  	[ADP5520_KEY(1, 2)]	= KEY_6,
  	[ADP5520_KEY(0, 2)]	= KEY_DOWN,
  	[ADP5520_KEY(3, 1)]	= KEY_7,
  	[ADP5520_KEY(2, 1)]	= KEY_8,
  	[ADP5520_KEY(1, 1)]	= KEY_9,
  	[ADP5520_KEY(0, 1)]	= KEY_DOT,
  	[ADP5520_KEY(3, 0)]	= KEY_BACKSPACE,
  	[ADP5520_KEY(2, 0)]	= KEY_0,
  	[ADP5520_KEY(1, 0)]	= KEY_HELP,
  	[ADP5520_KEY(0, 0)]	= KEY_ENTER,
  };
  
  static struct adp5520_keys_platform_data adp5520_keys_data = {
  	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
  	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
  	.keymap		= adp5520_keymap,
  	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
  	.repeat		= 0,
  };
  
  	/*

  	 *  ADP5520/5501 Multifunction Device Init Data

  	 */
  
  static struct adp5520_platform_data adp5520_pdev_data = {
  	.leds = &adp5520_leds_data,
  	.keys = &adp5520_keys_data,
  };
  
  #endif

  static struct i2c_board_info __initdata bfin_i2c_board_info[] = {

  #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)

  	{
  		I2C_BOARD_INFO("pcf8574_lcd", 0x22),

  	},
  #endif

  #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)

  	{
  		I2C_BOARD_INFO("pcf8574_keypad", 0x27),

  		.irq = IRQ_PF8,
  	},
  #endif

  #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
  	{
  		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
  	},
  #endif

  #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
  	{
  		I2C_BOARD_INFO("ad7879", 0x2C),
  		.irq = IRQ_PF8,
  		.platform_data = (void *)&bfin_ad7879_ts_info,
  	},
  #endif
  #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
  	{
  		I2C_BOARD_INFO("pmic-adp5520", 0x32),
  		.irq = IRQ_PF9,
  		.platform_data = (void *)&adp5520_pdev_data,
  	},
  #endif

  #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
  	{
  		I2C_BOARD_INFO("ssm2602", 0x1b),
  	},
  #endif

  #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
  	{
  		I2C_BOARD_INFO("ad5252", 0x2f),
  	},
  #endif

  #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
  	{
  		I2C_BOARD_INFO("adau1373", 0x1A),
  	},
  #endif

  };

  #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)

  #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
  static struct resource bfin_sport0_uart_resources[] = {
  	{
  		.start = SPORT0_TCR1,
  		.end = SPORT0_MRCS3+4,
  		.flags = IORESOURCE_MEM,
  	},
  	{
  		.start = IRQ_SPORT0_RX,
  		.end = IRQ_SPORT0_RX+1,
  		.flags = IORESOURCE_IRQ,
  	},
  	{
  		.start = IRQ_SPORT0_ERROR,
  		.end = IRQ_SPORT0_ERROR,
  		.flags = IORESOURCE_IRQ,
  	},
  };

  static unsigned short bfin_sport0_peripherals[] = {

  	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,

  	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0

  };

  static struct platform_device bfin_sport0_uart_device = {
  	.name = "bfin-sport-uart",
  	.id = 0,

  	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
  	.resource = bfin_sport0_uart_resources,
  	.dev = {
  		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
  	},
  };
  #endif
  #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
  static struct resource bfin_sport1_uart_resources[] = {
  	{
  		.start = SPORT1_TCR1,
  		.end = SPORT1_MRCS3+4,
  		.flags = IORESOURCE_MEM,
  	},
  	{
  		.start = IRQ_SPORT1_RX,
  		.end = IRQ_SPORT1_RX+1,
  		.flags = IORESOURCE_IRQ,
  	},
  	{
  		.start = IRQ_SPORT1_ERROR,
  		.end = IRQ_SPORT1_ERROR,
  		.flags = IORESOURCE_IRQ,
  	},
  };

  static unsigned short bfin_sport1_peripherals[] = {

  	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,

  	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0

  };
  
  static struct platform_device bfin_sport1_uart_device = {
  	.name = "bfin-sport-uart",
  	.id = 1,

  	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
  	.resource = bfin_sport1_uart_resources,
  	.dev = {
  		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
  	},

  };
  #endif

  #endif

  #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)

  #include <linux/gpio_keys.h>
  
  static struct gpio_keys_button bfin_gpio_keys_table[] = {
  	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
  	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
  };
  
  static struct gpio_keys_platform_data bfin_gpio_keys_data = {
  	.buttons        = bfin_gpio_keys_table,
  	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
  };
  
  static struct platform_device bfin_device_gpiokeys = {
  	.name      = "gpio-keys",
  	.dev = {
  		.platform_data = &bfin_gpio_keys_data,
  	},
  };
  #endif

  #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)

  #include <asm/bfin_rotary.h>
  
  static struct bfin_rotary_platform_data bfin_rotary_data = {
  	/*.rotary_up_key     = KEY_UP,*/
  	/*.rotary_down_key   = KEY_DOWN,*/
  	.rotary_rel_code   = REL_WHEEL,
  	.rotary_button_key = KEY_ENTER,
  	.debounce	   = 10,	/* 0..17 */
  	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
  };
  
  static struct resource bfin_rotary_resources[] = {
  	{
  		.start = IRQ_CNT,
  		.end = IRQ_CNT,
  		.flags = IORESOURCE_IRQ,
  	},
  };
  
  static struct platform_device bfin_rotary_device = {
  	.name		= "bfin-rotary",
  	.id		= -1,
  	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
  	.resource 	= bfin_rotary_resources,
  	.dev		= {
  		.platform_data = &bfin_rotary_data,
  	},
  };
  #endif

  static const unsigned int cclk_vlev_datasheet[] =
  {
  	VRPAIR(VLEV_100, 400000000),
  	VRPAIR(VLEV_105, 426000000),
  	VRPAIR(VLEV_110, 500000000),
  	VRPAIR(VLEV_115, 533000000),
  	VRPAIR(VLEV_120, 600000000),
  };
  
  static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
  	.tuple_tab = cclk_vlev_datasheet,
  	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
  	.vr_settling_time = 25 /* us */,
  };
  
  static struct platform_device bfin_dpmc = {
  	.name = "bfin dpmc",
  	.dev = {
  		.platform_data = &bfin_dmpc_vreg_data,
  	},
  };

  static struct platform_device *stamp_devices[] __initdata = {

  
  	&bfin_dpmc,

  #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
  	&bf5xx_nand_device,
  #endif

  #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
  	&bfin_pcmcia_cf_device,
  #endif
  
  #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
  	&rtc_device,
  #endif

  #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  	&bfin_isp1760_device,
  #endif

  #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  	&musb_device,
  #endif

  #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
  	&smc91x_device,
  #endif
  
  #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
  	&dm9000_device,
  #endif
  
  #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)

  	&bfin_mii_bus,

  	&bfin_mac_device,
  #endif
  
  #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
  	&net2272_bfin_device,
  #endif

  #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)

  	&bfin_spi0_device,
  #endif

  #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
  	&bf52x_t350mcqb_device,
  #endif

  #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
  	&bfin_lq035q1_device,
  #endif

  #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)

  #ifdef CONFIG_SERIAL_BFIN_UART0
  	&bfin_uart0_device,
  #endif
  #ifdef CONFIG_SERIAL_BFIN_UART1
  	&bfin_uart1_device,
  #endif

  #endif

  #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)

  #ifdef CONFIG_BFIN_SIR0
  	&bfin_sir0_device,
  #endif
  #ifdef CONFIG_BFIN_SIR1
  	&bfin_sir1_device,
  #endif

  #endif

  #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
  	&i2c_bfin_twi_device,
  #endif
  
  #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)

  #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART

  	&bfin_sport0_uart_device,

  #endif
  #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART

  	&bfin_sport1_uart_device,
  #endif

  #endif

  #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
  	&bfin_device_gpiokeys,
  #endif

  #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)

  	&bfin_rotary_device,
  #endif

  #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
  	&ezkit_flash_device,
  #endif

  #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
  	&bfin_i2s_pcm,
  #endif
  
  #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
  	&bfin_tdm_pcm,
  #endif
  
  #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
  	&bfin_ac97_pcm,

  #endif

  #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
  	&bfin_i2s,
  #endif
  
  #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
  	&bfin_tdm,
  #endif

  };

  static int __init ezkit_init(void)

  {

  	printk(KERN_INFO "%s(): registering device resources
  ", __func__);

  	i2c_register_board_info(0, bfin_i2c_board_info,
  				ARRAY_SIZE(bfin_i2c_board_info));

  	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));

  	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));

  	return 0;
  }

  arch_initcall(ezkit_init);

  static struct platform_device *ezkit_early_devices[] __initdata = {
  #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
  #ifdef CONFIG_SERIAL_BFIN_UART0
  	&bfin_uart0_device,
  #endif
  #ifdef CONFIG_SERIAL_BFIN_UART1
  	&bfin_uart1_device,
  #endif
  #endif
  
  #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
  #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
  	&bfin_sport0_uart_device,
  #endif
  #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
  	&bfin_sport1_uart_device,
  #endif
  #endif
  };
  
  void __init native_machine_early_platform_add_devices(void)
  {
  	printk(KERN_INFO "register early platform devices
  ");
  	early_platform_add_devices(ezkit_early_devices,
  		ARRAY_SIZE(ezkit_early_devices));
  }

  void native_machine_restart(char *cmd)
  {
  	/* workaround reboot hang when booting from SPI */
  	if ((bfin_read_SYSCR() & 0x7) == 0x3)

  		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);

  }

  void bfin_get_ether_addr(char *addr)

  {

  	/* the MAC is stored in OTP memory page 0xDF */
  	u32 ret;
  	u64 otp_mac;
  	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
  
  	ret = otp_read(0xDF, 0x00, &otp_mac);
  	if (!(ret & 0x1)) {
  		char *otp_mac_p = (char *)&otp_mac;
  		for (ret = 0; ret < 6; ++ret)
  			addr[ret] = otp_mac_p[5 - ret];
  	}

  }

  EXPORT_SYMBOL(bfin_get_ether_addr);