The following is a list of files and features that are going to be
  removed in the kernel source tree.  Every entry should contain what
  exactly is going away, why it is happening, and who is going to be doing
  the work.  When the feature is removed from the kernel, it should also
  be removed from this file.
  
  ---------------------------

  What:	x86 floppy disable_hlt
  When:	2012
  Why:	ancient workaround of dubious utility clutters the
  	code used by everybody else.
  Who:	Len Brown <len.brown@intel.com>
  
  ---------------------------

  What:	CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle
  When:	2012
  Why:	This optional sub-feature of APM is of dubious reliability,
  	and ancient APM laptops are likely better served by calling HLT.
  	Deleting CONFIG_APM_CPU_IDLE allows x86 to stop exporting
  	the pm_idle function pointer to modules.
  Who:	Len Brown <len.brown@intel.com>
  
  ----------------------------

  What:	x86_32 "no-hlt" cmdline param
  When:	2012
  Why:	remove a branch from idle path, simplify code used by everybody.
  	This option disabled the use of HLT in idle and machine_halt()
  	for hardware that was flakey 15-years ago.  Today we have
  	"idle=poll" that removed HLT from idle, and so if such a machine
  	is still running the upstream kernel, "idle=poll" is likely sufficient.
  Who:	Len Brown <len.brown@intel.com>
  
  ----------------------------

  What:	x86 "idle=mwait" cmdline param
  When:	2012
  Why:	simplify x86 idle code
  Who:	Len Brown <len.brown@intel.com>
  
  ----------------------------

  What:	PRISM54
  When:	2.6.34
  
  Why:	prism54 FullMAC PCI / Cardbus devices used to be supported only by the
  	prism54 wireless driver. After Intersil stopped selling these
  	devices in preference for the newer more flexible SoftMAC devices
  	a SoftMAC device driver was required and prism54 did not support
  	them. The p54pci driver now exists and has been present in the kernel for
  	a while. This driver supports both SoftMAC devices and FullMAC devices.
  	The main difference between these devices was the amount of memory which
  	could be used for the firmware. The SoftMAC devices support a smaller
  	amount of memory. Because of this the SoftMAC firmware fits into FullMAC
  	devices's memory. p54pci supports not only PCI / Cardbus but also USB
  	and SPI. Since p54pci supports all devices prism54 supports
  	you will have a conflict. I'm not quite sure how distributions are
  	handling this conflict right now. prism54 was kept around due to
  	claims users may experience issues when using the SoftMAC driver.
  	Time has passed users have not reported issues. If you use prism54
  	and for whatever reason you cannot use p54pci please let us know!
  	E-mail us at: linux-wireless@vger.kernel.org
  
  	For more information see the p54 wiki page:
  
  	http://wireless.kernel.org/en/users/Drivers/p54
  
  Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
  
  ---------------------------

  What:	IRQF_SAMPLE_RANDOM
  Check:	IRQF_SAMPLE_RANDOM
  When:	July 2009
  
  Why:	Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy
  	sources in the kernel's current entropy model. To resolve this, every
  	input point to the kernel's entropy pool needs to better document the
  	type of entropy source it actually is. This will be replaced with
  	additional add_*_randomness functions in drivers/char/random.c
  
  Who:	Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
  
  ---------------------------

  What:	Deprecated snapshot ioctls
  When:	2.6.36
  
  Why:	The ioctls in kernel/power/user.c were marked as deprecated long time
  	ago. Now they notify users about that so that they need to replace
  	their userspace. After some more time, remove them completely.
  
  Who:	Jiri Slaby <jirislaby@gmail.com>
  
  ---------------------------

  What:	The ieee80211_regdom module parameter

  When:	March 2010 / desktop catchup

  
  Why:	This was inherited by the CONFIG_WIRELESS_OLD_REGULATORY code,
  	and currently serves as an option for users to define an
  	ISO / IEC 3166 alpha2 code for the country they are currently
  	present in. Although there are userspace API replacements for this
  	through nl80211 distributions haven't yet caught up with implementing
  	decent alternatives through standard GUIs. Although available as an
  	option through iw or wpa_supplicant its just a matter of time before
  	distributions pick up good GUI options for this. The ideal solution
  	would actually consist of intelligent designs which would do this for
  	the user automatically even when travelling through different countries.
  	Until then we leave this module parameter as a compromise.
  
  	When userspace improves with reasonable widely-available alternatives for
  	this we will no longer need this module parameter. This entry hopes that
  	by the super-futuristically looking date of "March 2010" we will have
  	such replacements widely available.
  
  Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
  
  ---------------------------

  What:	dev->power.power_state

  When:	July 2007
  Why:	Broken design for runtime control over driver power states, confusing
  	driver-internal runtime power management with:  mechanisms to support
  	system-wide sleep state transitions; event codes that distinguish
  	different phases of swsusp "sleep" transitions; and userspace policy
  	inputs.  This framework was never widely used, and most attempts to
  	use it were broken.  Drivers should instead be exposing domain-specific
  	interfaces either to kernel or to userspace.

  Who:	Pavel Machek <pavel@ucw.cz>

  
  ---------------------------

  What:	/proc/<pid>/oom_adj
  When:	August 2012
  Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
  	badness heuristic used to determine which task to kill when the kernel
  	is out of memory.
  
  	The badness heuristic has since been rewritten since the introduction of
  	this tunable such that its meaning is deprecated.  The value was
  	implemented as a bitshift on a score generated by the badness()
  	function that did not have any precise units of measure.  With the
  	rewrite, the score is given as a proportion of available memory to the
  	task allocating pages, so using a bitshift which grows the score
  	exponentially is, thus, impossible to tune with fine granularity.
  
  	A much more powerful interface, /proc/<pid>/oom_score_adj, was
  	introduced with the oom killer rewrite that allows users to increase or

  	decrease the badness score linearly.  This interface will replace

  	/proc/<pid>/oom_adj.
  
  	A warning will be emitted to the kernel log if an application uses this
  	deprecated interface.  After it is printed once, future warnings will be
  	suppressed until the kernel is rebooted.
  
  ---------------------------

  What:	remove EXPORT_SYMBOL(kernel_thread)
  When:	August 2006
  Files:	arch/*/kernel/*_ksyms.c

  Check:	kernel_thread

  Why:	kernel_thread is a low-level implementation detail.  Drivers should
          use the <linux/kthread.h> API instead which shields them from
  	implementation details and provides a higherlevel interface that
  	prevents bugs and code duplication
  Who:	Christoph Hellwig <hch@lst.de>
  
  ---------------------------

  What:	Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
  	(temporary transition config option provided until then)
  	The transition config option will also be removed at the same time.
  When:	before 2.6.19
  Why:	Unused symbols are both increasing the size of the kernel binary
  	and are often a sign of "wrong API"
  Who:	Arjan van de Ven <arjan@linux.intel.com>
  
  ---------------------------

  What:	PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment

  When:	October 2008

  Why:	The stacking of class devices makes these values misleading and
  	inconsistent.
  	Class devices should not carry any of these properties, and bus
  	devices have SUBSYTEM and DRIVER as a replacement.
  Who:	Kay Sievers <kay.sievers@suse.de>
  
  ---------------------------

  What:	ACPI procfs interface

  When:	July 2008
  Why:	ACPI sysfs conversion should be finished by January 2008.
  	ACPI procfs interface will be removed in July 2008 so that
  	there is enough time for the user space to catch up.

  Who:	Zhang Rui <rui.zhang@intel.com>
  
  ---------------------------

  What:	CONFIG_ACPI_PROCFS_POWER
  When:	2.6.39
  Why:	sysfs I/F for ACPI power devices, including AC and Battery,

          has been working in upstream kernel since 2.6.24, Sep 2007.

  	In 2.6.37, we make the sysfs I/F always built in and this option
  	disabled by default.
  	Remove this option and the ACPI power procfs interface in 2.6.39.
  Who:	Zhang Rui <rui.zhang@intel.com>
  
  ---------------------------

  What:	/proc/acpi/event
  When:	February 2008
  Why:	/proc/acpi/event has been replaced by events via the input layer
  	and netlink since 2.6.23.
  Who:	Len Brown <len.brown@intel.com>
  
  ---------------------------

  What:	i386/x86_64 bzImage symlinks

  When:	April 2010

  
  Why:	The i386/x86_64 merge provides a symlink to the old bzImage
  	location so not yet updated user space tools, e.g. package
  	scripts, do not break.
  Who:	Thomas Gleixner <tglx@linutronix.de>

  
  ---------------------------

  What:	GPIO autorequest on gpio_direction_{input,output}() in gpiolib
  When:	February 2010
  Why:	All callers should use explicit gpio_request()/gpio_free().
  	The autorequest mechanism in gpiolib was provided mostly as a
  	migration aid for legacy GPIO interfaces (for SOC based GPIOs).
  	Those users have now largely migrated.  Platforms implementing
  	the GPIO interfaces without using gpiolib will see no changes.
  Who:	David Brownell <dbrownell@users.sourceforge.net>
  ---------------------------

  What:	b43 support for firmware revision < 410

  When:	The schedule was July 2008, but it was decided that we are going to keep the
          code as long as there are no major maintanance headaches.
  	So it _could_ be removed _any_ time now, if it conflicts with something new.

  Why:	The support code for the old firmware hurts code readability/maintainability
  	and slightly hurts runtime performance. Bugfixes for the old firmware
  	are not provided by Broadcom anymore.

  Who:	Michael Buesch <m@bues.ch>

  
  ---------------------------

  What:	Ability for non root users to shm_get hugetlb pages based on mlock
  	resource limits
  When:	2.6.31
  Why:	Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or
  	have CAP_IPC_LOCK to be able to allocate shm segments backed by
  	huge pages.  The mlock based rlimit check to allow shm hugetlb is
  	inconsistent with mmap based allocations.  Hence it is being
  	deprecated.
  Who:	Ravikiran Thirumalai <kiran@scalex86.org>
  
  ---------------------------

  What:	Code that is now under CONFIG_WIRELESS_EXT_SYSFS
  	(in net/core/net-sysfs.c)
  When:	After the only user (hal) has seen a release with the patches
  	for enough time, probably some time in 2010.
  Why:	Over 1K .text/.data size reduction, data is available in other
  	ways (ioctls)
  Who:	Johannes Berg <johannes@sipsolutions.net>

  
  ---------------------------

  What:	sysfs ui for changing p4-clockmod parameters
  When:	September 2009
  Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
  	e088e4c9cdb618675874becb91b2fd581ee707e6.
  	Removal is subject to fixing any remaining bugs in ACPI which may
  	cause the thermal throttling not to happen at the right time.
  Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>

  
  -----------------------------

  What:	fakephp and associated sysfs files in /sys/bus/pci/slots/
  When:	2011
  Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
  	represent a machine's physical PCI slots. The change in semantics
  	had userspace implications, as the hotplug core no longer allowed
  	drivers to create multiple sysfs files per physical slot (required
  	for multi-function devices, e.g.). fakephp was seen as a developer's
  	tool only, and its interface changed. Too late, we learned that
  	there were some users of the fakephp interface.
  
  	In 2.6.30, the original fakephp interface was restored. At the same
  	time, the PCI core gained the ability that fakephp provided, namely
  	function-level hot-remove and hot-add.
  
  	Since the PCI core now provides the same functionality, exposed in:
  
  		/sys/bus/pci/rescan
  		/sys/bus/pci/devices/.../remove
  		/sys/bus/pci/devices/.../rescan
  
  	there is no functional reason to maintain fakephp as well.
  
  	We will keep the existing module so that 'modprobe fakephp' will
  	present the old /sys/bus/pci/slots/... interface for compatibility,
  	but users are urged to migrate their applications to the API above.
  
  	After a reasonable transition period, we will remove the legacy
  	fakephp interface.
  Who:	Alex Chiang <achiang@hp.com>

  
  ---------------------------

  What:	CONFIG_RFKILL_INPUT
  When:	2.6.33
  Why:	Should be implemented in userspace, policy daemon.
  Who:	Johannes Berg <johannes@sipsolutions.net>

  ----------------------------

  
  What:	sound-slot/service-* module aliases and related clutters in
  	sound/sound_core.c
  When:	August 2010
  Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
  	(14) and requests modules using custom sound-slot/service-*
  	module aliases.  The only benefit of doing this is allowing
  	use of custom module aliases which might as well be considered
  	a bug at this point.  This preemptive claiming prevents
  	alternative OSS implementations.
  
  	Till the feature is removed, the kernel will be requesting
  	both sound-slot/service-* and the standard char-major-* module
  	aliases and allow turning off the pre-claiming selectively via
  	CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
  	kernel parameter.
  
  	After the transition phase is complete, both the custom module
  	aliases and switches to disable it will go away.  This removal
  	will also allow making ALSA OSS emulation independent of
  	sound_core.  The dependency will be broken then too.
  Who:	Tejun Heo <tj@kernel.org>

  
  ----------------------------

  What:	sysfs-class-rfkill state file
  When:	Feb 2014
  Files:	net/rfkill/core.c
  Why: 	Documented as obsolete since Feb 2010. This file is limited to 3
  	states while the rfkill drivers can have 4 states.
  Who: 	anybody or Florian Mickler <florian@mickler.org>
  
  ----------------------------
  
  What: 	sysfs-class-rfkill claim file
  When:	Feb 2012
  Files:	net/rfkill/core.c
  Why:	It is not possible to claim an rfkill driver since 2007. This is
  	Documented as obsolete since Feb 2010.
  Who: 	anybody or Florian Mickler <florian@mickler.org>
  
  ----------------------------

  What:	KVM paravirt mmu host support
  When:	January 2011
  Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
  	on newer and older hardware.  It is already not exposed to the guest,
  	and kept only for live migration purposes.
  Who:	Avi Kivity <avi@redhat.com>

  
  ----------------------------

  What:	iwlwifi 50XX module parameters

  When:	3.0

  Why:	The "..50" modules parameters were used to configure 5000 series and
  	up devices; different set of module parameters also available for 4965
  	with same functionalities. Consolidate both set into single place
  	in drivers/net/wireless/iwlwifi/iwl-agn.c
  
  Who:	Wey-Yi Guy <wey-yi.w.guy@intel.com>

  
  ----------------------------
  
  What:	iwl4965 alias support

  When:	3.0

  Why:	Internal alias support has been present in module-init-tools for some
  	time, the MODULE_ALIAS("iwl4965") boilerplate aliases can be removed
  	with no impact.
  
  Who:	Wey-Yi Guy <wey-yi.w.guy@intel.com>

  ---------------------------
  
  What:	xt_NOTRACK
  Files:	net/netfilter/xt_NOTRACK.c
  When:	April 2011
  Why:	Superseded by xt_CT
  Who:	Netfilter developer team <netfilter-devel@vger.kernel.org>

  ----------------------------

  What:	IRQF_DISABLED
  When:	2.6.36
  Why:	The flag is a NOOP as we run interrupt handlers with interrupts disabled
  Who:	Thomas Gleixner <tglx@linutronix.de>

  
  ----------------------------

  What: 	PCI DMA unmap state API
  When:	August 2012
  Why:	PCI DMA unmap state API (include/linux/pci-dma.h) was replaced
  	with DMA unmap state API (DMA unmap state API can be used for
  	any bus).
  Who:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
  
  ----------------------------

  What:	iwlwifi disable_hw_scan module parameters

  When:	3.0

  Why:	Hareware scan is the prefer method for iwlwifi devices for
  	scanning operation. Remove software scan support for all the
  	iwlwifi devices.
  
  Who:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
  
  ----------------------------

  What:	Legacy, non-standard chassis intrusion detection interface.
  When:	June 2011
  Why:	The adm9240, w83792d and w83793 hardware monitoring drivers have
  	legacy interfaces for chassis intrusion detection. A standard
  	interface has been added to each driver, so the legacy interface
  	can be removed.
  Who:	Jean Delvare <khali@linux-fr.org>
  
  ----------------------------

  What:	xt_connlimit rev 0
  When:	2012
  Who:	Jan Engelhardt <jengelh@medozas.de>
  Files:	net/netfilter/xt_connlimit.c
  
  ----------------------------

  What:	ipt_addrtype match include file
  When:	2012
  Why:	superseded by xt_addrtype
  Who:	Florian Westphal <fw@strlen.de>
  Files:	include/linux/netfilter_ipv4/ipt_addrtype.h
  
  ----------------------------

  
  What:	i2c_driver.attach_adapter
  	i2c_driver.detach_adapter
  When:	September 2011
  Why:	These legacy callbacks should no longer be used as i2c-core offers
  	a variety of preferable alternative ways to instantiate I2C devices.
  Who:	Jean Delvare <khali@linux-fr.org>
  
  ----------------------------

  What:	Support for driver specific ioctls in the pwc driver (everything
  	defined in media/pwc-ioctl.h)
  When:	3.3
  Why:	This stems from the v4l1 era, with v4l2 everything can be done with
  	standardized v4l2 API calls
  Who:	Hans de Goede <hdegoede@redhat.com>
  
  ----------------------------
  
  What:	Driver specific sysfs API in the pwc driver
  When:	3.3
  Why:	Setting pan/tilt should be done with v4l2 controls, like with other
  	cams. The button is available as a standard input device
  Who:	Hans de Goede <hdegoede@redhat.com>
  
  ----------------------------
  
  What:	Driver specific use of pixfmt.priv in the pwc driver
  When:	3.3
  Why:	The .priv field never was intended for this, setting a framerate is
  	support using the standardized S_PARM ioctl
  Who:	Hans de Goede <hdegoede@redhat.com>
  
  ----------------------------
  
  What:	Software emulation of arbritary resolutions in the pwc driver
  When:	3.3
  Why:	The pwc driver claims to support any resolution between 160x120
  	and 640x480, but emulates this by simply drawing a black border
  	around the image. Userspace can draw its own black border if it
  	really wants one.
  Who:	Hans de Goede <hdegoede@redhat.com>
  
  ----------------------------

  What:	For VIDIOC_S_FREQUENCY the type field must match the device node's type.
  	If not, return -EINVAL.
  When:	3.2
  Why:	It makes no sense to switch the tuner to radio mode by calling
  	VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
  	calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
  	move to more consistent handling of tv and radio tuners.
  Who:	Hans Verkuil <hans.verkuil@cisco.com>
  
  ----------------------------
  
  What:	Opening a radio device node will no longer automatically switch the
  	tuner mode from tv to radio.
  When:	3.3
  Why:	Just opening a V4L device should not change the state of the hardware
  	like that. It's very unexpected and against the V4L spec. Instead, you
  	switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second
  	and last step of the move to consistent handling of tv and radio tuners.
  Who:	Hans Verkuil <hans.verkuil@cisco.com>
  
  ----------------------------

  What:	g_file_storage driver
  When:	3.8
  Why:	This driver has been superseded by g_mass_storage.
  Who:	Alan Stern <stern@rowland.harvard.edu>
  
  ----------------------------

  
  What:   threeg and interface sysfs files in /sys/devices/platform/acer-wmi
  When:   2012
  Why:    In 3.0, we can now autodetect internal 3G device and already have
  	the threeg rfkill device. So, we plan to remove threeg sysfs support
  	for it's no longer necessary.
  
  	We also plan to remove interface sysfs file that exposed which ACPI-WMI
  	interface that was used by acer-wmi driver. It will replaced by
  	information log when acer-wmi initial.
  Who:    Lee, Chun-Yi <jlee@novell.com>

  
  ----------------------------

  What:	The XFS nodelaylog mount option
  When:	3.3
  Why:	The delaylog mode that has been the default since 2.6.39 has proven
  	stable, and the old code is in the way of additional improvements in
  	the log code.
  Who:	Christoph Hellwig <hch@lst.de>

  
  ----------------------------

  What:	iwlagn alias support
  When:	3.5
  Why:	The iwlagn module has been renamed iwlwifi.  The alias will be around
  	for backward compatibility for several cycles and then dropped.

  Who:	Don Fry <donald.h.fry@intel.com>