Blame view
drivers/leds/leds-lp8860.c
11.8 KB
81f7e3824
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 |
/* * TI LP8860 4-Channel LED Driver * * Copyright (C) 2014 Texas Instruments * * Author: Dan Murphy <dmurphy@ti.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * */ #include <linux/i2c.h> #include <linux/init.h> #include <linux/leds.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/gpio/consumer.h> #include <linux/slab.h> #define LP8860_DISP_CL1_BRT_MSB 0x00 #define LP8860_DISP_CL1_BRT_LSB 0x01 #define LP8860_DISP_CL1_CURR_MSB 0x02 #define LP8860_DISP_CL1_CURR_LSB 0x03 #define LP8860_CL2_BRT_MSB 0x04 #define LP8860_CL2_BRT_LSB 0x05 #define LP8860_CL2_CURRENT 0x06 #define LP8860_CL3_BRT_MSB 0x07 #define LP8860_CL3_BRT_LSB 0x08 #define LP8860_CL3_CURRENT 0x09 #define LP8860_CL4_BRT_MSB 0x0a #define LP8860_CL4_BRT_LSB 0x0b #define LP8860_CL4_CURRENT 0x0c #define LP8860_CONFIG 0x0d #define LP8860_STATUS 0x0e #define LP8860_FAULT 0x0f #define LP8860_LED_FAULT 0x10 #define LP8860_FAULT_CLEAR 0x11 #define LP8860_ID 0x12 #define LP8860_TEMP_MSB 0x13 #define LP8860_TEMP_LSB 0x14 #define LP8860_DISP_LED_CURR_MSB 0x15 #define LP8860_DISP_LED_CURR_LSB 0x16 #define LP8860_DISP_LED_PWM_MSB 0x17 #define LP8860_DISP_LED_PWM_LSB 0x18 #define LP8860_EEPROM_CNTRL 0x19 #define LP8860_EEPROM_UNLOCK 0x1a #define LP8860_EEPROM_REG_0 0x60 #define LP8860_EEPROM_REG_1 0x61 #define LP8860_EEPROM_REG_2 0x62 #define LP8860_EEPROM_REG_3 0x63 #define LP8860_EEPROM_REG_4 0x64 #define LP8860_EEPROM_REG_5 0x65 #define LP8860_EEPROM_REG_6 0x66 #define LP8860_EEPROM_REG_7 0x67 #define LP8860_EEPROM_REG_8 0x68 #define LP8860_EEPROM_REG_9 0x69 #define LP8860_EEPROM_REG_10 0x6a #define LP8860_EEPROM_REG_11 0x6b #define LP8860_EEPROM_REG_12 0x6c #define LP8860_EEPROM_REG_13 0x6d #define LP8860_EEPROM_REG_14 0x6e #define LP8860_EEPROM_REG_15 0x6f #define LP8860_EEPROM_REG_16 0x70 #define LP8860_EEPROM_REG_17 0x71 #define LP8860_EEPROM_REG_18 0x72 #define LP8860_EEPROM_REG_19 0x73 #define LP8860_EEPROM_REG_20 0x74 #define LP8860_EEPROM_REG_21 0x75 #define LP8860_EEPROM_REG_22 0x76 #define LP8860_EEPROM_REG_23 0x77 #define LP8860_EEPROM_REG_24 0x78 #define LP8860_LOCK_EEPROM 0x00 #define LP8860_UNLOCK_EEPROM 0x01 #define LP8860_PROGRAM_EEPROM 0x02 #define LP8860_EEPROM_CODE_1 0x08 #define LP8860_EEPROM_CODE_2 0xba #define LP8860_EEPROM_CODE_3 0xef #define LP8860_CLEAR_FAULTS 0x01 #define LP8860_DISP_LED_NAME "display_cluster" /** * struct lp8860_led - * @lock - Lock for reading/writing the device * @client - Pointer to the I2C client * @led_dev - led class device pointer * @regmap - Devices register map * @eeprom_regmap - EEPROM register map * @enable_gpio - VDDIO/EN gpio to enable communication interface * @regulator - LED supply regulator pointer * @label - LED label **/ struct lp8860_led { struct mutex lock; struct i2c_client *client; struct led_classdev led_dev; struct regmap *regmap; struct regmap *eeprom_regmap; struct gpio_desc *enable_gpio; struct regulator *regulator; const char *label; }; struct lp8860_eeprom_reg { uint8_t reg; uint8_t value; }; static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = { { LP8860_EEPROM_REG_0, 0xed }, { LP8860_EEPROM_REG_1, 0xdf }, { LP8860_EEPROM_REG_2, 0xdc }, { LP8860_EEPROM_REG_3, 0xf0 }, { LP8860_EEPROM_REG_4, 0xdf }, { LP8860_EEPROM_REG_5, 0xe5 }, { LP8860_EEPROM_REG_6, 0xf2 }, { LP8860_EEPROM_REG_7, 0x77 }, { LP8860_EEPROM_REG_8, 0x77 }, { LP8860_EEPROM_REG_9, 0x71 }, { LP8860_EEPROM_REG_10, 0x3f }, { LP8860_EEPROM_REG_11, 0xb7 }, { LP8860_EEPROM_REG_12, 0x17 }, { LP8860_EEPROM_REG_13, 0xef }, { LP8860_EEPROM_REG_14, 0xb0 }, { LP8860_EEPROM_REG_15, 0x87 }, { LP8860_EEPROM_REG_16, 0xce }, { LP8860_EEPROM_REG_17, 0x72 }, { LP8860_EEPROM_REG_18, 0xe5 }, { LP8860_EEPROM_REG_19, 0xdf }, { LP8860_EEPROM_REG_20, 0x35 }, { LP8860_EEPROM_REG_21, 0x06 }, { LP8860_EEPROM_REG_22, 0xdc }, { LP8860_EEPROM_REG_23, 0x88 }, { LP8860_EEPROM_REG_24, 0x3E }, }; static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock) { int ret; mutex_lock(&led->lock); if (lock == LP8860_UNLOCK_EEPROM) { ret = regmap_write(led->regmap, LP8860_EEPROM_UNLOCK, LP8860_EEPROM_CODE_1); if (ret) { dev_err(&led->client->dev, "EEPROM Unlock failed "); goto out; } ret = regmap_write(led->regmap, LP8860_EEPROM_UNLOCK, LP8860_EEPROM_CODE_2); if (ret) { dev_err(&led->client->dev, "EEPROM Unlock failed "); goto out; } ret = regmap_write(led->regmap, LP8860_EEPROM_UNLOCK, LP8860_EEPROM_CODE_3); if (ret) { dev_err(&led->client->dev, "EEPROM Unlock failed "); goto out; } } else { ret = regmap_write(led->regmap, LP8860_EEPROM_UNLOCK, LP8860_LOCK_EEPROM); } out: mutex_unlock(&led->lock); return ret; } static int lp8860_fault_check(struct lp8860_led *led) { int ret, fault; unsigned int read_buf; ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf); if (ret) goto out; fault = read_buf; ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf); if (ret) goto out; fault |= read_buf; /* Attempt to clear any faults */ if (fault) ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR, LP8860_CLEAR_FAULTS); out: return ret; } static int lp8860_brightness_set(struct led_classdev *led_cdev, enum led_brightness brt_val) { struct lp8860_led *led = container_of(led_cdev, struct lp8860_led, led_dev); int disp_brightness = brt_val * 255; int ret; mutex_lock(&led->lock); ret = lp8860_fault_check(led); if (ret) { dev_err(&led->client->dev, "Cannot read/clear faults "); goto out; } ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB, (disp_brightness & 0xff00) >> 8); if (ret) { dev_err(&led->client->dev, "Cannot write CL1 MSB "); goto out; } ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB, disp_brightness & 0xff); if (ret) { dev_err(&led->client->dev, "Cannot write CL1 LSB "); goto out; } out: mutex_unlock(&led->lock); return ret; } static int lp8860_init(struct lp8860_led *led) { unsigned int read_buf; int ret, i, reg_count; if (led->enable_gpio) gpiod_direction_output(led->enable_gpio, 1); ret = lp8860_fault_check(led); if (ret) goto out; ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf); if (ret) goto out; ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM); if (ret) { dev_err(&led->client->dev, "Failed unlocking EEPROM "); goto out; } reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]); for (i = 0; i < reg_count; i++) { ret = regmap_write(led->eeprom_regmap, lp8860_eeprom_disp_regs[i].reg, lp8860_eeprom_disp_regs[i].value); if (ret) { dev_err(&led->client->dev, "Failed writing EEPROM "); goto out; } } ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM); if (ret) goto out; ret = regmap_write(led->regmap, LP8860_EEPROM_CNTRL, LP8860_PROGRAM_EEPROM); if (ret) dev_err(&led->client->dev, "Failed programming EEPROM "); out: if (ret) if (led->enable_gpio) gpiod_direction_output(led->enable_gpio, 0); return ret; } static const struct reg_default lp8860_reg_defs[] = { { LP8860_DISP_CL1_BRT_MSB, 0x00}, { LP8860_DISP_CL1_BRT_LSB, 0x00}, { LP8860_DISP_CL1_CURR_MSB, 0x00}, { LP8860_DISP_CL1_CURR_LSB, 0x00}, { LP8860_CL2_BRT_MSB, 0x00}, { LP8860_CL2_BRT_LSB, 0x00}, { LP8860_CL2_CURRENT, 0x00}, { LP8860_CL3_BRT_MSB, 0x00}, { LP8860_CL3_BRT_LSB, 0x00}, { LP8860_CL3_CURRENT, 0x00}, { LP8860_CL4_BRT_MSB, 0x00}, { LP8860_CL4_BRT_LSB, 0x00}, { LP8860_CL4_CURRENT, 0x00}, { LP8860_CONFIG, 0x00}, { LP8860_FAULT_CLEAR, 0x00}, { LP8860_EEPROM_CNTRL, 0x80}, { LP8860_EEPROM_UNLOCK, 0x00}, }; static const struct regmap_config lp8860_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = LP8860_EEPROM_UNLOCK, .reg_defaults = lp8860_reg_defs, .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs), .cache_type = REGCACHE_NONE, }; static const struct reg_default lp8860_eeprom_defs[] = { { LP8860_EEPROM_REG_0, 0x00 }, { LP8860_EEPROM_REG_1, 0x00 }, { LP8860_EEPROM_REG_2, 0x00 }, { LP8860_EEPROM_REG_3, 0x00 }, { LP8860_EEPROM_REG_4, 0x00 }, { LP8860_EEPROM_REG_5, 0x00 }, { LP8860_EEPROM_REG_6, 0x00 }, { LP8860_EEPROM_REG_7, 0x00 }, { LP8860_EEPROM_REG_8, 0x00 }, { LP8860_EEPROM_REG_9, 0x00 }, { LP8860_EEPROM_REG_10, 0x00 }, { LP8860_EEPROM_REG_11, 0x00 }, { LP8860_EEPROM_REG_12, 0x00 }, { LP8860_EEPROM_REG_13, 0x00 }, { LP8860_EEPROM_REG_14, 0x00 }, { LP8860_EEPROM_REG_15, 0x00 }, { LP8860_EEPROM_REG_16, 0x00 }, { LP8860_EEPROM_REG_17, 0x00 }, { LP8860_EEPROM_REG_18, 0x00 }, { LP8860_EEPROM_REG_19, 0x00 }, { LP8860_EEPROM_REG_20, 0x00 }, { LP8860_EEPROM_REG_21, 0x00 }, { LP8860_EEPROM_REG_22, 0x00 }, { LP8860_EEPROM_REG_23, 0x00 }, { LP8860_EEPROM_REG_24, 0x00 }, }; static const struct regmap_config lp8860_eeprom_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = LP8860_EEPROM_REG_24, .reg_defaults = lp8860_eeprom_defs, .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs), .cache_type = REGCACHE_NONE, }; static int lp8860_probe(struct i2c_client *client, const struct i2c_device_id *id) { int ret; struct lp8860_led *led; struct device_node *np = client->dev.of_node; led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); if (!led) return -ENOMEM; led->label = LP8860_DISP_LED_NAME; if (client->dev.of_node) { ret = of_property_read_string(np, "label", &led->label); if (ret) { dev_err(&client->dev, "Missing label in dt "); return -EINVAL; } } led->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW); if (IS_ERR(led->enable_gpio)) { ret = PTR_ERR(led->enable_gpio); dev_err(&client->dev, "Failed to get enable gpio: %d ", ret); return ret; } led->regulator = devm_regulator_get(&client->dev, "vled"); if (IS_ERR(led->regulator)) led->regulator = NULL; led->client = client; led->led_dev.name = led->label; led->led_dev.max_brightness = LED_FULL; led->led_dev.brightness_set_blocking = lp8860_brightness_set; mutex_init(&led->lock); i2c_set_clientdata(client, led); led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config); if (IS_ERR(led->regmap)) { ret = PTR_ERR(led->regmap); dev_err(&client->dev, "Failed to allocate register map: %d ", ret); return ret; } led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config); if (IS_ERR(led->eeprom_regmap)) { ret = PTR_ERR(led->eeprom_regmap); dev_err(&client->dev, "Failed to allocate register map: %d ", ret); return ret; } ret = lp8860_init(led); if (ret) return ret; ret = led_classdev_register(&client->dev, &led->led_dev); if (ret) { dev_err(&client->dev, "led register err: %d ", ret); return ret; } return 0; } static int lp8860_remove(struct i2c_client *client) { struct lp8860_led *led = i2c_get_clientdata(client); int ret; led_classdev_unregister(&led->led_dev); if (led->enable_gpio) gpiod_direction_output(led->enable_gpio, 0); if (led->regulator) { ret = regulator_disable(led->regulator); if (ret) dev_err(&led->client->dev, "Failed to disable regulator "); } return 0; } static const struct i2c_device_id lp8860_id[] = { { "lp8860", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, lp8860_id); #ifdef CONFIG_OF static const struct of_device_id of_lp8860_leds_match[] = { { .compatible = "ti,lp8860", }, {}, }; MODULE_DEVICE_TABLE(of, of_lp8860_leds_match); #endif static struct i2c_driver lp8860_driver = { .driver = { .name = "lp8860", .of_match_table = of_match_ptr(of_lp8860_leds_match), }, .probe = lp8860_probe, .remove = lp8860_remove, .id_table = lp8860_id, }; module_i2c_driver(lp8860_driver); MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver"); MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); MODULE_LICENSE("GPL"); |