/*
   * "splice": joining two ropes together by interweaving their strands.
   *
   * This is the "extended pipe" functionality, where a pipe is used as
   * an arbitrary in-memory buffer. Think of a pipe as a small kernel
   * buffer that you can use to transfer data from one end to the other.
   *
   * The traditional unix read/write is extended with a "splice()" operation
   * that transfers data buffers to or from a pipe buffer.
   *
   * Named by Larry McVoy, original implementation from Linus, extended by

   * Jens to support splicing to files, network, direct splicing, etc and
   * fixing lots of bugs.

   *

   * Copyright (C) 2005-2006 Jens Axboe <axboe@kernel.dk>

   * Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org>
   * Copyright (C) 2006 Ingo Molnar <mingo@elte.hu>

   *
   */
  #include <linux/fs.h>
  #include <linux/file.h>
  #include <linux/pagemap.h>

  #include <linux/splice.h>

  #include <linux/memcontrol.h>

  #include <linux/mm_inline.h>

  #include <linux/swap.h>

  #include <linux/writeback.h>
  #include <linux/buffer_head.h>

  #include <linux/module.h>

  #include <linux/syscalls.h>

  #include <linux/uio.h>

  #include <linux/security.h>

  #include <linux/gfp.h>

  /*
   * Attempt to steal a page from a pipe buffer. This should perhaps go into
   * a vm helper function, it's already simplified quite a bit by the
   * addition of remove_mapping(). If success is returned, the caller may
   * attempt to reuse this page for another destination.
   */

  static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe,

  				     struct pipe_buffer *buf)
  {
  	struct page *page = buf->page;

  	struct address_space *mapping;

  	lock_page(page);

  	mapping = page_mapping(page);
  	if (mapping) {
  		WARN_ON(!PageUptodate(page));

  		/*
  		 * At least for ext2 with nobh option, we need to wait on
  		 * writeback completing on this page, since we'll remove it
  		 * from the pagecache.  Otherwise truncate wont wait on the
  		 * page, allowing the disk blocks to be reused by someone else
  		 * before we actually wrote our data to them. fs corruption
  		 * ensues.
  		 */
  		wait_on_page_writeback(page);

  		if (page_has_private(page) &&
  		    !try_to_release_page(page, GFP_KERNEL))

  			goto out_unlock;

  		/*
  		 * If we succeeded in removing the mapping, set LRU flag
  		 * and return good.
  		 */
  		if (remove_mapping(mapping, page)) {
  			buf->flags |= PIPE_BUF_FLAG_LRU;
  			return 0;
  		}

  	}

  	/*
  	 * Raced with truncate or failed to remove page from current
  	 * address space, unlock and return failure.
  	 */

  out_unlock:

  	unlock_page(page);
  	return 1;

  }

  static void page_cache_pipe_buf_release(struct pipe_inode_info *pipe,

  					struct pipe_buffer *buf)
  {
  	page_cache_release(buf->page);

  	buf->flags &= ~PIPE_BUF_FLAG_LRU;

  }

  /*
   * Check whether the contents of buf is OK to access. Since the content
   * is a page cache page, IO may be in flight.
   */

  static int page_cache_pipe_buf_confirm(struct pipe_inode_info *pipe,
  				       struct pipe_buffer *buf)

  {
  	struct page *page = buf->page;

  	int err;

  
  	if (!PageUptodate(page)) {

  		lock_page(page);
  
  		/*
  		 * Page got truncated/unhashed. This will cause a 0-byte

  		 * splice, if this is the first page.

  		 */
  		if (!page->mapping) {
  			err = -ENODATA;
  			goto error;
  		}

  		/*

  		 * Uh oh, read-error from disk.

  		 */
  		if (!PageUptodate(page)) {
  			err = -EIO;
  			goto error;
  		}
  
  		/*

  		 * Page is ok afterall, we are done.

  		 */

  		unlock_page(page);

  	}

  	return 0;

  error:
  	unlock_page(page);

  	return err;

  }

  static const struct pipe_buf_operations page_cache_pipe_buf_ops = {

  	.can_merge = 0,

  	.map = generic_pipe_buf_map,
  	.unmap = generic_pipe_buf_unmap,

  	.confirm = page_cache_pipe_buf_confirm,

  	.release = page_cache_pipe_buf_release,

  	.steal = page_cache_pipe_buf_steal,

  	.get = generic_pipe_buf_get,

  };

  static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe,
  				    struct pipe_buffer *buf)
  {

  	if (!(buf->flags & PIPE_BUF_FLAG_GIFT))
  		return 1;

  	buf->flags |= PIPE_BUF_FLAG_LRU;

  	return generic_pipe_buf_steal(pipe, buf);

  }

  static const struct pipe_buf_operations user_page_pipe_buf_ops = {

  	.can_merge = 0,

  	.map = generic_pipe_buf_map,
  	.unmap = generic_pipe_buf_unmap,

  	.confirm = generic_pipe_buf_confirm,

  	.release = page_cache_pipe_buf_release,
  	.steal = user_page_pipe_buf_steal,

  	.get = generic_pipe_buf_get,

  };

  /**
   * splice_to_pipe - fill passed data into a pipe
   * @pipe:	pipe to fill
   * @spd:	data to fill
   *
   * Description:

   *    @spd contains a map of pages and len/offset tuples, along with

   *    the struct pipe_buf_operations associated with these pages. This
   *    function will link that data to the pipe.
   *

   */

  ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
  		       struct splice_pipe_desc *spd)

  {

  	unsigned int spd_pages = spd->nr_pages;

  	int ret, do_wakeup, page_nr;

  
  	ret = 0;
  	do_wakeup = 0;

  	page_nr = 0;

  	pipe_lock(pipe);

  	for (;;) {

  		if (!pipe->readers) {

  			send_sig(SIGPIPE, current, 0);
  			if (!ret)
  				ret = -EPIPE;
  			break;
  		}

  		if (pipe->nrbufs < pipe->buffers) {
  			int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);

  			struct pipe_buffer *buf = pipe->bufs + newbuf;

  			buf->page = spd->pages[page_nr];
  			buf->offset = spd->partial[page_nr].offset;
  			buf->len = spd->partial[page_nr].len;

  			buf->private = spd->partial[page_nr].private;

  			buf->ops = spd->ops;

  			if (spd->flags & SPLICE_F_GIFT)
  				buf->flags |= PIPE_BUF_FLAG_GIFT;

  			pipe->nrbufs++;

  			page_nr++;
  			ret += buf->len;

  			if (pipe->inode)
  				do_wakeup = 1;

  			if (!--spd->nr_pages)

  				break;

  			if (pipe->nrbufs < pipe->buffers)

  				continue;
  
  			break;
  		}

  		if (spd->flags & SPLICE_F_NONBLOCK) {

  			if (!ret)
  				ret = -EAGAIN;
  			break;
  		}

  		if (signal_pending(current)) {
  			if (!ret)
  				ret = -ERESTARTSYS;
  			break;
  		}
  
  		if (do_wakeup) {

  			smp_mb();

  			if (waitqueue_active(&pipe->wait))
  				wake_up_interruptible_sync(&pipe->wait);
  			kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);

  			do_wakeup = 0;
  		}

  		pipe->waiting_writers++;
  		pipe_wait(pipe);
  		pipe->waiting_writers--;

  	}

  	pipe_unlock(pipe);

  	if (do_wakeup) {
  		smp_mb();
  		if (waitqueue_active(&pipe->wait))
  			wake_up_interruptible(&pipe->wait);
  		kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);

  	}

  	while (page_nr < spd_pages)

  		spd->spd_release(spd, page_nr++);

  
  	return ret;
  }

  static void spd_release_page(struct splice_pipe_desc *spd, unsigned int i)
  {
  	page_cache_release(spd->pages[i]);
  }

  /*
   * Check if we need to grow the arrays holding pages and partial page
   * descriptions.
   */
  int splice_grow_spd(struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
  {
  	if (pipe->buffers <= PIPE_DEF_BUFFERS)
  		return 0;
  
  	spd->pages = kmalloc(pipe->buffers * sizeof(struct page *), GFP_KERNEL);
  	spd->partial = kmalloc(pipe->buffers * sizeof(struct partial_page), GFP_KERNEL);
  
  	if (spd->pages && spd->partial)
  		return 0;
  
  	kfree(spd->pages);
  	kfree(spd->partial);
  	return -ENOMEM;
  }
  
  void splice_shrink_spd(struct pipe_inode_info *pipe,
  		       struct splice_pipe_desc *spd)
  {
  	if (pipe->buffers <= PIPE_DEF_BUFFERS)
  		return;
  
  	kfree(spd->pages);
  	kfree(spd->partial);
  }

  static int

  __generic_file_splice_read(struct file *in, loff_t *ppos,
  			   struct pipe_inode_info *pipe, size_t len,
  			   unsigned int flags)

  {
  	struct address_space *mapping = in->f_mapping;

  	unsigned int loff, nr_pages, req_pages;

  	struct page *pages[PIPE_DEF_BUFFERS];
  	struct partial_page partial[PIPE_DEF_BUFFERS];

  	struct page *page;

  	pgoff_t index, end_index;
  	loff_t isize;

  	int error, page_nr;

  	struct splice_pipe_desc spd = {
  		.pages = pages,
  		.partial = partial,
  		.flags = flags,
  		.ops = &page_cache_pipe_buf_ops,

  		.spd_release = spd_release_page,

  	};

  	if (splice_grow_spd(pipe, &spd))
  		return -ENOMEM;

  	index = *ppos >> PAGE_CACHE_SHIFT;

  	loff = *ppos & ~PAGE_CACHE_MASK;

  	req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;

  	nr_pages = min(req_pages, pipe->buffers);

  
  	/*

  	 * Lookup the (hopefully) full range of pages we need.
  	 */

  	spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, spd.pages);

  	index += spd.nr_pages;

  	/*
  	 * If find_get_pages_contig() returned fewer pages than we needed,

  	 * readahead/allocate the rest and fill in the holes.

  	 */

  	if (spd.nr_pages < nr_pages)

  		page_cache_sync_readahead(mapping, &in->f_ra, in,
  				index, req_pages - spd.nr_pages);

  	error = 0;

  	while (spd.nr_pages < nr_pages) {

  		/*

  		 * Page could be there, find_get_pages_contig() breaks on
  		 * the first hole.

  		 */

  		page = find_get_page(mapping, index);
  		if (!page) {

  			/*

  			 * page didn't exist, allocate one.

  			 */
  			page = page_cache_alloc_cold(mapping);
  			if (!page)
  				break;
  
  			error = add_to_page_cache_lru(page, mapping, index,

  						GFP_KERNEL);

  			if (unlikely(error)) {
  				page_cache_release(page);

  				if (error == -EEXIST)
  					continue;

  				break;
  			}

  			/*
  			 * add_to_page_cache() locks the page, unlock it
  			 * to avoid convoluting the logic below even more.
  			 */
  			unlock_page(page);

  		}

  		spd.pages[spd.nr_pages++] = page;

  		index++;
  	}
  
  	/*
  	 * Now loop over the map and see if we need to start IO on any
  	 * pages, fill in the partial map, etc.
  	 */
  	index = *ppos >> PAGE_CACHE_SHIFT;
  	nr_pages = spd.nr_pages;
  	spd.nr_pages = 0;
  	for (page_nr = 0; page_nr < nr_pages; page_nr++) {
  		unsigned int this_len;
  
  		if (!len)
  			break;
  
  		/*
  		 * this_len is the max we'll use from this page
  		 */
  		this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff);

  		page = spd.pages[page_nr];

  		if (PageReadahead(page))

  			page_cache_async_readahead(mapping, &in->f_ra, in,

  					page, index, req_pages - page_nr);

  		/*
  		 * If the page isn't uptodate, we may need to start io on it
  		 */
  		if (!PageUptodate(page)) {

  			lock_page(page);

  
  			/*

  			 * Page was truncated, or invalidated by the
  			 * filesystem.  Redo the find/create, but this time the
  			 * page is kept locked, so there's no chance of another
  			 * race with truncate/invalidate.

  			 */
  			if (!page->mapping) {
  				unlock_page(page);

  				page = find_or_create_page(mapping, index,
  						mapping_gfp_mask(mapping));
  
  				if (!page) {
  					error = -ENOMEM;
  					break;
  				}

  				page_cache_release(spd.pages[page_nr]);
  				spd.pages[page_nr] = page;

  			}
  			/*
  			 * page was already under io and is now done, great
  			 */
  			if (PageUptodate(page)) {
  				unlock_page(page);
  				goto fill_it;
  			}

  			/*
  			 * need to read in the page
  			 */
  			error = mapping->a_ops->readpage(in, page);

  			if (unlikely(error)) {

  				/*
  				 * We really should re-lookup the page here,
  				 * but it complicates things a lot. Instead
  				 * lets just do what we already stored, and
  				 * we'll get it the next time we are called.
  				 */

  				if (error == AOP_TRUNCATED_PAGE)

  					error = 0;

  				break;
  			}

  		}
  fill_it:
  		/*
  		 * i_size must be checked after PageUptodate.
  		 */
  		isize = i_size_read(mapping->host);
  		end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
  		if (unlikely(!isize || index > end_index))
  			break;
  
  		/*
  		 * if this is the last page, see if we need to shrink
  		 * the length and stop
  		 */
  		if (end_index == index) {
  			unsigned int plen;

  
  			/*

  			 * max good bytes in this page

  			 */

  			plen = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
  			if (plen <= loff)

  				break;

  
  			/*

  			 * force quit after adding this page

  			 */

  			this_len = min(this_len, plen - loff);
  			len = this_len;

  		}

  		spd.partial[page_nr].offset = loff;
  		spd.partial[page_nr].len = this_len;

  		len -= this_len;

  		loff = 0;

  		spd.nr_pages++;
  		index++;

  	}

  	/*

  	 * Release any pages at the end, if we quit early. 'page_nr' is how far

  	 * we got, 'nr_pages' is how many pages are in the map.
  	 */
  	while (page_nr < nr_pages)

  		page_cache_release(spd.pages[page_nr++]);

  	in->f_ra.prev_pos = (loff_t)index << PAGE_CACHE_SHIFT;

  	if (spd.nr_pages)

  		error = splice_to_pipe(pipe, &spd);

  	splice_shrink_spd(pipe, &spd);

  	return error;

  }

  /**
   * generic_file_splice_read - splice data from file to a pipe
   * @in:		file to splice from

   * @ppos:	position in @in

   * @pipe:	pipe to splice to
   * @len:	number of bytes to splice
   * @flags:	splice modifier flags
   *

   * Description:
   *    Will read pages from given file and fill them into a pipe. Can be
   *    used as long as the address_space operations for the source implements
   *    a readpage() hook.
   *

   */

  ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
  				 struct pipe_inode_info *pipe, size_t len,
  				 unsigned int flags)

  {

  	loff_t isize, left;

  	int ret;

  
  	isize = i_size_read(in->f_mapping->host);
  	if (unlikely(*ppos >= isize))
  		return 0;
  
  	left = isize - *ppos;
  	if (unlikely(left < len))
  		len = left;

  	ret = __generic_file_splice_read(in, ppos, pipe, len, flags);

  	if (ret > 0) {

  		*ppos += ret;

  		file_accessed(in);
  	}

  
  	return ret;
  }

  EXPORT_SYMBOL(generic_file_splice_read);

  static const struct pipe_buf_operations default_pipe_buf_ops = {
  	.can_merge = 0,
  	.map = generic_pipe_buf_map,
  	.unmap = generic_pipe_buf_unmap,
  	.confirm = generic_pipe_buf_confirm,
  	.release = generic_pipe_buf_release,
  	.steal = generic_pipe_buf_steal,
  	.get = generic_pipe_buf_get,
  };
  
  static ssize_t kernel_readv(struct file *file, const struct iovec *vec,
  			    unsigned long vlen, loff_t offset)
  {
  	mm_segment_t old_fs;
  	loff_t pos = offset;
  	ssize_t res;
  
  	old_fs = get_fs();
  	set_fs(get_ds());
  	/* The cast to a user pointer is valid due to the set_fs() */
  	res = vfs_readv(file, (const struct iovec __user *)vec, vlen, &pos);
  	set_fs(old_fs);
  
  	return res;
  }

  static ssize_t kernel_write(struct file *file, const char *buf, size_t count,
  			    loff_t pos)

  {
  	mm_segment_t old_fs;
  	ssize_t res;
  
  	old_fs = get_fs();
  	set_fs(get_ds());
  	/* The cast to a user pointer is valid due to the set_fs() */

  	res = vfs_write(file, (const char __user *)buf, count, &pos);

  	set_fs(old_fs);
  
  	return res;
  }

  ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
  				 struct pipe_inode_info *pipe, size_t len,
  				 unsigned int flags)
  {
  	unsigned int nr_pages;
  	unsigned int nr_freed;
  	size_t offset;

  	struct page *pages[PIPE_DEF_BUFFERS];
  	struct partial_page partial[PIPE_DEF_BUFFERS];
  	struct iovec *vec, __vec[PIPE_DEF_BUFFERS];

  	ssize_t res;
  	size_t this_len;
  	int error;
  	int i;
  	struct splice_pipe_desc spd = {
  		.pages = pages,
  		.partial = partial,
  		.flags = flags,
  		.ops = &default_pipe_buf_ops,
  		.spd_release = spd_release_page,
  	};

  	if (splice_grow_spd(pipe, &spd))
  		return -ENOMEM;
  
  	res = -ENOMEM;
  	vec = __vec;
  	if (pipe->buffers > PIPE_DEF_BUFFERS) {
  		vec = kmalloc(pipe->buffers * sizeof(struct iovec), GFP_KERNEL);
  		if (!vec)
  			goto shrink_ret;
  	}

  	offset = *ppos & ~PAGE_CACHE_MASK;
  	nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;

  	for (i = 0; i < nr_pages && i < pipe->buffers && len; i++) {

  		struct page *page;

  		page = alloc_page(GFP_USER);

  		error = -ENOMEM;
  		if (!page)
  			goto err;
  
  		this_len = min_t(size_t, len, PAGE_CACHE_SIZE - offset);

  		vec[i].iov_base = (void __user *) page_address(page);

  		vec[i].iov_len = this_len;

  		spd.pages[i] = page;

  		spd.nr_pages++;
  		len -= this_len;
  		offset = 0;
  	}
  
  	res = kernel_readv(in, vec, spd.nr_pages, *ppos);

  	if (res < 0) {
  		error = res;

  		goto err;

  	}

  
  	error = 0;
  	if (!res)
  		goto err;
  
  	nr_freed = 0;
  	for (i = 0; i < spd.nr_pages; i++) {

  		this_len = min_t(size_t, vec[i].iov_len, res);

  		spd.partial[i].offset = 0;
  		spd.partial[i].len = this_len;

  		if (!this_len) {

  			__free_page(spd.pages[i]);
  			spd.pages[i] = NULL;

  			nr_freed++;
  		}
  		res -= this_len;
  	}
  	spd.nr_pages -= nr_freed;
  
  	res = splice_to_pipe(pipe, &spd);
  	if (res > 0)
  		*ppos += res;

  shrink_ret:
  	if (vec != __vec)
  		kfree(vec);
  	splice_shrink_spd(pipe, &spd);

  	return res;
  
  err:

  	for (i = 0; i < spd.nr_pages; i++)

  		__free_page(spd.pages[i]);

  	res = error;
  	goto shrink_ret;

  }
  EXPORT_SYMBOL(default_file_splice_read);

  /*

   * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'

   * using sendpage(). Return the number of bytes sent.

   */

  static int pipe_to_sendpage(struct pipe_inode_info *pipe,

  			    struct pipe_buffer *buf, struct splice_desc *sd)
  {

  	struct file *file = sd->u.file;

  	loff_t pos = sd->pos;

  	int more;

  	if (!likely(file->f_op && file->f_op->sendpage))
  		return -EINVAL;
  
  	more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;
  	return file->f_op->sendpage(file, buf->page, buf->offset,
  				    sd->len, &pos, more);

  }
  
  /*
   * This is a little more tricky than the file -> pipe splicing. There are
   * basically three cases:
   *
   *	- Destination page already exists in the address space and there
   *	  are users of it. For that case we have no other option that
   *	  copying the data. Tough luck.
   *	- Destination page already exists in the address space, but there
   *	  are no users of it. Make sure it's uptodate, then drop it. Fall
   *	  through to last case.
   *	- Destination page does not exist, we can add the pipe page to
   *	  the page cache and avoid the copy.
   *

   * If asked to move pages to the output file (SPLICE_F_MOVE is set in
   * sd->flags), we attempt to migrate pages from the pipe to the output
   * file address space page cache. This is possible if no one else has
   * the pipe page referenced outside of the pipe and page cache. If
   * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
   * a new page in the output file page cache and fill/dirty that.

   */

  int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
  		 struct splice_desc *sd)

  {

  	struct file *file = sd->u.file;

  	struct address_space *mapping = file->f_mapping;

  	unsigned int offset, this_len;

  	struct page *page;

  	void *fsdata;

  	int ret;

  	offset = sd->pos & ~PAGE_CACHE_MASK;

  	this_len = sd->len;
  	if (this_len + offset > PAGE_CACHE_SIZE)
  		this_len = PAGE_CACHE_SIZE - offset;

  	ret = pagecache_write_begin(file, mapping, sd->pos, this_len,
  				AOP_FLAG_UNINTERRUPTIBLE, &page, &fsdata);
  	if (unlikely(ret))
  		goto out;

  	if (buf->page != page) {

  		/*
  		 * Careful, ->map() uses KM_USER0!
  		 */

  		char *src = buf->ops->map(pipe, buf, 1);

  		char *dst = kmap_atomic(page, KM_USER1);

  		memcpy(dst + offset, src + buf->offset, this_len);

  		flush_dcache_page(page);

  		kunmap_atomic(dst, KM_USER1);

  		buf->ops->unmap(pipe, buf, src);

  	}

  	ret = pagecache_write_end(file, mapping, sd->pos, this_len, this_len,
  				page, fsdata);

  out:

  	return ret;
  }

  EXPORT_SYMBOL(pipe_to_file);

  static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
  {
  	smp_mb();
  	if (waitqueue_active(&pipe->wait))
  		wake_up_interruptible(&pipe->wait);
  	kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
  }

  /**

   * splice_from_pipe_feed - feed available data from a pipe to a file

   * @pipe:	pipe to splice from
   * @sd:		information to @actor
   * @actor:	handler that splices the data
   *
   * Description:

   *    This function loops over the pipe and calls @actor to do the
   *    actual moving of a single struct pipe_buffer to the desired
   *    destination.  It returns when there's no more buffers left in
   *    the pipe or if the requested number of bytes (@sd->total_len)
   *    have been copied.  It returns a positive number (one) if the
   *    pipe needs to be filled with more data, zero if the required
   *    number of bytes have been copied and -errno on error.

   *

   *    This, together with splice_from_pipe_{begin,end,next}, may be
   *    used to implement the functionality of __splice_from_pipe() when
   *    locking is required around copying the pipe buffers to the
   *    destination.

   */

  int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
  			  splice_actor *actor)

  {

  	int ret;

  	while (pipe->nrbufs) {
  		struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
  		const struct pipe_buf_operations *ops = buf->ops;

  		sd->len = buf->len;
  		if (sd->len > sd->total_len)
  			sd->len = sd->total_len;

  		ret = buf->ops->confirm(pipe, buf);
  		if (unlikely(ret)) {

  			if (ret == -ENODATA)
  				ret = 0;
  			return ret;
  		}

  
  		ret = actor(pipe, buf, sd);
  		if (ret <= 0)
  			return ret;

  		buf->offset += ret;
  		buf->len -= ret;
  
  		sd->num_spliced += ret;
  		sd->len -= ret;
  		sd->pos += ret;
  		sd->total_len -= ret;
  
  		if (!buf->len) {
  			buf->ops = NULL;
  			ops->release(pipe, buf);

  			pipe->curbuf = (pipe->curbuf + 1) & (pipe->buffers - 1);

  			pipe->nrbufs--;
  			if (pipe->inode)
  				sd->need_wakeup = true;
  		}

  		if (!sd->total_len)
  			return 0;
  	}

  	return 1;
  }
  EXPORT_SYMBOL(splice_from_pipe_feed);

  /**
   * splice_from_pipe_next - wait for some data to splice from
   * @pipe:	pipe to splice from
   * @sd:		information about the splice operation
   *
   * Description:
   *    This function will wait for some data and return a positive
   *    value (one) if pipe buffers are available.  It will return zero
   *    or -errno if no more data needs to be spliced.
   */
  int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
  {
  	while (!pipe->nrbufs) {
  		if (!pipe->writers)
  			return 0;

  		if (!pipe->waiting_writers && sd->num_spliced)
  			return 0;

  		if (sd->flags & SPLICE_F_NONBLOCK)
  			return -EAGAIN;

  		if (signal_pending(current))
  			return -ERESTARTSYS;

  		if (sd->need_wakeup) {
  			wakeup_pipe_writers(pipe);
  			sd->need_wakeup = false;

  		}

  		pipe_wait(pipe);
  	}

  	return 1;
  }
  EXPORT_SYMBOL(splice_from_pipe_next);

  /**
   * splice_from_pipe_begin - start splicing from pipe

   * @sd:		information about the splice operation

   *
   * Description:
   *    This function should be called before a loop containing
   *    splice_from_pipe_next() and splice_from_pipe_feed() to
   *    initialize the necessary fields of @sd.
   */
  void splice_from_pipe_begin(struct splice_desc *sd)
  {
  	sd->num_spliced = 0;
  	sd->need_wakeup = false;
  }
  EXPORT_SYMBOL(splice_from_pipe_begin);

  /**
   * splice_from_pipe_end - finish splicing from pipe
   * @pipe:	pipe to splice from
   * @sd:		information about the splice operation
   *
   * Description:
   *    This function will wake up pipe writers if necessary.  It should
   *    be called after a loop containing splice_from_pipe_next() and
   *    splice_from_pipe_feed().
   */
  void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
  {
  	if (sd->need_wakeup)
  		wakeup_pipe_writers(pipe);
  }
  EXPORT_SYMBOL(splice_from_pipe_end);

  /**
   * __splice_from_pipe - splice data from a pipe to given actor
   * @pipe:	pipe to splice from
   * @sd:		information to @actor
   * @actor:	handler that splices the data
   *
   * Description:
   *    This function does little more than loop over the pipe and call
   *    @actor to do the actual moving of a single struct pipe_buffer to
   *    the desired destination. See pipe_to_file, pipe_to_sendpage, or
   *    pipe_to_user.
   *
   */
  ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
  			   splice_actor *actor)
  {
  	int ret;

  	splice_from_pipe_begin(sd);
  	do {
  		ret = splice_from_pipe_next(pipe, sd);
  		if (ret > 0)
  			ret = splice_from_pipe_feed(pipe, sd, actor);
  	} while (ret > 0);
  	splice_from_pipe_end(pipe, sd);
  
  	return sd->num_spliced ? sd->num_spliced : ret;

  }

  EXPORT_SYMBOL(__splice_from_pipe);

  /**
   * splice_from_pipe - splice data from a pipe to a file
   * @pipe:	pipe to splice from
   * @out:	file to splice to
   * @ppos:	position in @out
   * @len:	how many bytes to splice
   * @flags:	splice modifier flags
   * @actor:	handler that splices the data
   *
   * Description:

   *    See __splice_from_pipe. This function locks the pipe inode,

   *    otherwise it's identical to __splice_from_pipe().
   *
   */

  ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
  			 loff_t *ppos, size_t len, unsigned int flags,
  			 splice_actor *actor)
  {
  	ssize_t ret;

  	struct splice_desc sd = {
  		.total_len = len,
  		.flags = flags,
  		.pos = *ppos,

  		.u.file = out,

  	};

  	pipe_lock(pipe);

  	ret = __splice_from_pipe(pipe, &sd, actor);

  	pipe_unlock(pipe);

  
  	return ret;
  }
  
  /**

   * generic_file_splice_write - splice data from a pipe to a file

   * @pipe:	pipe info

   * @out:	file to write to

   * @ppos:	position in @out

   * @len:	number of bytes to splice
   * @flags:	splice modifier flags
   *

   * Description:
   *    Will either move or copy pages (determined by @flags options) from
   *    the given pipe inode to the given file.

   *
   */

  ssize_t
  generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,

  			  loff_t *ppos, size_t len, unsigned int flags)

  {

  	struct address_space *mapping = out->f_mapping;

  	struct inode *inode = mapping->host;

  	struct splice_desc sd = {
  		.total_len = len,
  		.flags = flags,
  		.pos = *ppos,
  		.u.file = out,
  	};

  	ssize_t ret;

  	pipe_lock(pipe);

  
  	splice_from_pipe_begin(&sd);
  	do {
  		ret = splice_from_pipe_next(pipe, &sd);
  		if (ret <= 0)
  			break;
  
  		mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
  		ret = file_remove_suid(out);

  		if (!ret) {
  			file_update_time(out);

  			ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file);

  		}

  		mutex_unlock(&inode->i_mutex);
  	} while (ret > 0);
  	splice_from_pipe_end(pipe, &sd);

  	pipe_unlock(pipe);

  
  	if (sd.num_spliced)
  		ret = sd.num_spliced;

  	if (ret > 0) {

  		unsigned long nr_pages;

  		int err;

  		nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;

  		err = generic_write_sync(out, *ppos, ret);
  		if (err)
  			ret = err;
  		else
  			*ppos += ret;

  		balance_dirty_pages_ratelimited_nr(mapping, nr_pages);

  	}
  
  	return ret;

  }

  EXPORT_SYMBOL(generic_file_splice_write);

  static int write_pipe_buf(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
  			  struct splice_desc *sd)

  {

  	int ret;
  	void *data;

  	data = buf->ops->map(pipe, buf, 0);
  	ret = kernel_write(sd->u.file, data + buf->offset, sd->len, sd->pos);
  	buf->ops->unmap(pipe, buf, data);
  
  	return ret;

  }
  
  static ssize_t default_file_splice_write(struct pipe_inode_info *pipe,
  					 struct file *out, loff_t *ppos,
  					 size_t len, unsigned int flags)
  {

  	ssize_t ret;

  	ret = splice_from_pipe(pipe, out, ppos, len, flags, write_pipe_buf);
  	if (ret > 0)
  		*ppos += ret;

  	return ret;

  }

  /**
   * generic_splice_sendpage - splice data from a pipe to a socket

   * @pipe:	pipe to splice from

   * @out:	socket to write to

   * @ppos:	position in @out

   * @len:	number of bytes to splice
   * @flags:	splice modifier flags
   *

   * Description:
   *    Will send @len bytes from the pipe to a network socket. No data copying
   *    is involved.

   *
   */

  ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,

  				loff_t *ppos, size_t len, unsigned int flags)

  {

  	return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);

  }

  EXPORT_SYMBOL(generic_splice_sendpage);

  /*
   * Attempt to initiate a splice from pipe to file.
   */

  static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,

  			   loff_t *ppos, size_t len, unsigned int flags)

  {

  	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *,
  				loff_t *, size_t, unsigned int);

  	int ret;

  	if (unlikely(!(out->f_mode & FMODE_WRITE)))

  		return -EBADF;

  	if (unlikely(out->f_flags & O_APPEND))
  		return -EINVAL;

  	ret = rw_verify_area(WRITE, out, ppos, len);

  	if (unlikely(ret < 0))
  		return ret;

  	if (out->f_op && out->f_op->splice_write)
  		splice_write = out->f_op->splice_write;
  	else

  		splice_write = default_file_splice_write;
  
  	return splice_write(pipe, out, ppos, len, flags);

  }

  /*
   * Attempt to initiate a splice from a file to a pipe.
   */

  static long do_splice_to(struct file *in, loff_t *ppos,
  			 struct pipe_inode_info *pipe, size_t len,
  			 unsigned int flags)

  {

  	ssize_t (*splice_read)(struct file *, loff_t *,
  			       struct pipe_inode_info *, size_t, unsigned int);

  	int ret;

  	if (unlikely(!(in->f_mode & FMODE_READ)))

  		return -EBADF;

  	ret = rw_verify_area(READ, in, ppos, len);

  	if (unlikely(ret < 0))
  		return ret;

  	if (in->f_op && in->f_op->splice_read)
  		splice_read = in->f_op->splice_read;
  	else

  		splice_read = default_file_splice_read;
  
  	return splice_read(in, ppos, pipe, len, flags);

  }

  /**
   * splice_direct_to_actor - splices data directly between two non-pipes
   * @in:		file to splice from
   * @sd:		actor information on where to splice to
   * @actor:	handles the data splicing
   *
   * Description:
   *    This is a special case helper to splice directly between two
   *    points, without requiring an explicit pipe. Internally an allocated

   *    pipe is cached in the process, and reused during the lifetime of

   *    that process.
   *

   */
  ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
  			       splice_direct_actor *actor)

  {
  	struct pipe_inode_info *pipe;
  	long ret, bytes;
  	umode_t i_mode;

  	size_t len;
  	int i, flags;

  
  	/*
  	 * We require the input being a regular file, as we don't want to
  	 * randomly drop data for eg socket -> socket splicing. Use the
  	 * piped splicing for that!
  	 */

  	i_mode = in->f_path.dentry->d_inode->i_mode;

  	if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode)))
  		return -EINVAL;
  
  	/*
  	 * neither in nor out is a pipe, setup an internal pipe attached to
  	 * 'out' and transfer the wanted data from 'in' to 'out' through that
  	 */
  	pipe = current->splice_pipe;

  	if (unlikely(!pipe)) {

  		pipe = alloc_pipe_info(NULL);
  		if (!pipe)
  			return -ENOMEM;
  
  		/*
  		 * We don't have an immediate reader, but we'll read the stuff

  		 * out of the pipe right after the splice_to_pipe(). So set

  		 * PIPE_READERS appropriately.
  		 */
  		pipe->readers = 1;
  
  		current->splice_pipe = pipe;
  	}
  
  	/*

  	 * Do the splice.

  	 */
  	ret = 0;
  	bytes = 0;

  	len = sd->total_len;
  	flags = sd->flags;
  
  	/*
  	 * Don't block on output, we have to drain the direct pipe.
  	 */
  	sd->flags &= ~SPLICE_F_NONBLOCK;

  
  	while (len) {

  		size_t read_len;

  		loff_t pos = sd->pos, prev_pos = pos;

  		ret = do_splice_to(in, &pos, pipe, len, flags);

  		if (unlikely(ret <= 0))

  			goto out_release;
  
  		read_len = ret;

  		sd->total_len = read_len;

  
  		/*
  		 * NOTE: nonblocking mode only applies to the input. We
  		 * must not do the output in nonblocking mode as then we
  		 * could get stuck data in the internal pipe:
  		 */

  		ret = actor(pipe, sd);

  		if (unlikely(ret <= 0)) {
  			sd->pos = prev_pos;

  			goto out_release;

  		}

  
  		bytes += ret;
  		len -= ret;

  		sd->pos = pos;

  		if (ret < read_len) {
  			sd->pos = prev_pos + ret;

  			goto out_release;

  		}

  	}

  done:

  	pipe->nrbufs = pipe->curbuf = 0;

  	file_accessed(in);

  	return bytes;
  
  out_release:
  	/*
  	 * If we did an incomplete transfer we must release
  	 * the pipe buffers in question:
  	 */

  	for (i = 0; i < pipe->buffers; i++) {

  		struct pipe_buffer *buf = pipe->bufs + i;
  
  		if (buf->ops) {
  			buf->ops->release(pipe, buf);
  			buf->ops = NULL;
  		}
  	}

  	if (!bytes)
  		bytes = ret;

  	goto done;

  }
  EXPORT_SYMBOL(splice_direct_to_actor);
  
  static int direct_splice_actor(struct pipe_inode_info *pipe,
  			       struct splice_desc *sd)
  {

  	struct file *file = sd->u.file;

  	return do_splice_from(pipe, file, &file->f_pos, sd->total_len,
  			      sd->flags);

  }

  /**
   * do_splice_direct - splices data directly between two files
   * @in:		file to splice from
   * @ppos:	input file offset
   * @out:	file to splice to
   * @len:	number of bytes to splice
   * @flags:	splice modifier flags
   *
   * Description:
   *    For use by do_sendfile(). splice can easily emulate sendfile, but
   *    doing it in the application would incur an extra system call
   *    (splice in + splice out, as compared to just sendfile()). So this helper
   *    can splice directly through a process-private pipe.
   *
   */

  long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
  		      size_t len, unsigned int flags)
  {
  	struct splice_desc sd = {
  		.len		= len,
  		.total_len	= len,
  		.flags		= flags,
  		.pos		= *ppos,

  		.u.file		= out,

  	};

  	long ret;

  
  	ret = splice_direct_to_actor(in, &sd, direct_splice_actor);

  	if (ret > 0)

  		*ppos = sd.pos;

  	return ret;

  }

  static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
  			       struct pipe_inode_info *opipe,
  			       size_t len, unsigned int flags);

  
  /*

   * Determine where to splice to/from.
   */

  static long do_splice(struct file *in, loff_t __user *off_in,
  		      struct file *out, loff_t __user *off_out,
  		      size_t len, unsigned int flags)

  {

  	struct pipe_inode_info *ipipe;
  	struct pipe_inode_info *opipe;

  	loff_t offset, *off;

  	long ret;

  	ipipe = get_pipe_info(in);
  	opipe = get_pipe_info(out);

  
  	if (ipipe && opipe) {
  		if (off_in || off_out)
  			return -ESPIPE;
  
  		if (!(in->f_mode & FMODE_READ))
  			return -EBADF;
  
  		if (!(out->f_mode & FMODE_WRITE))
  			return -EBADF;
  
  		/* Splicing to self would be fun, but... */
  		if (ipipe == opipe)
  			return -EINVAL;
  
  		return splice_pipe_to_pipe(ipipe, opipe, len, flags);
  	}
  
  	if (ipipe) {

  		if (off_in)
  			return -ESPIPE;

  		if (off_out) {

  			if (!(out->f_mode & FMODE_PWRITE))

  				return -EINVAL;

  			if (copy_from_user(&offset, off_out, sizeof(loff_t)))

  				return -EFAULT;

  			off = &offset;
  		} else
  			off = &out->f_pos;

  		ret = do_splice_from(ipipe, out, off, len, flags);

  
  		if (off_out && copy_to_user(off_out, off, sizeof(loff_t)))
  			ret = -EFAULT;
  
  		return ret;

  	}

  	if (opipe) {

  		if (off_out)
  			return -ESPIPE;

  		if (off_in) {

  			if (!(in->f_mode & FMODE_PREAD))

  				return -EINVAL;

  			if (copy_from_user(&offset, off_in, sizeof(loff_t)))

  				return -EFAULT;

  			off = &offset;
  		} else
  			off = &in->f_pos;

  		ret = do_splice_to(in, off, opipe, len, flags);

  
  		if (off_in && copy_to_user(off_in, off, sizeof(loff_t)))
  			ret = -EFAULT;
  
  		return ret;

  	}

  
  	return -EINVAL;
  }

  /*
   * Map an iov into an array of pages and offset/length tupples. With the
   * partial_page structure, we can map several non-contiguous ranges into
   * our ones pages[] map instead of splitting that operation into pieces.
   * Could easily be exported as a generic helper for other users, in which
   * case one would probably want to add a 'max_nr_pages' parameter as well.
   */
  static int get_iovec_page_array(const struct iovec __user *iov,
  				unsigned int nr_vecs, struct page **pages,

  				struct partial_page *partial, int aligned,
  				unsigned int pipe_buffers)

  {
  	int buffers = 0, error = 0;

  	while (nr_vecs) {
  		unsigned long off, npages;

  		struct iovec entry;

  		void __user *base;
  		size_t len;
  		int i;

  		error = -EFAULT;

  		if (copy_from_user(&entry, iov, sizeof(entry)))

  			break;

  		base = entry.iov_base;
  		len = entry.iov_len;

  		/*
  		 * Sanity check this iovec. 0 read succeeds.
  		 */

  		error = 0;

  		if (unlikely(!len))
  			break;
  		error = -EFAULT;

  		if (!access_ok(VERIFY_READ, base, len))

  			break;
  
  		/*
  		 * Get this base offset and number of pages, then map
  		 * in the user pages.
  		 */
  		off = (unsigned long) base & ~PAGE_MASK;

  
  		/*
  		 * If asked for alignment, the offset must be zero and the
  		 * length a multiple of the PAGE_SIZE.
  		 */
  		error = -EINVAL;
  		if (aligned && (off || len & ~PAGE_MASK))
  			break;

  		npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT;

  		if (npages > pipe_buffers - buffers)
  			npages = pipe_buffers - buffers;

  		error = get_user_pages_fast((unsigned long)base, npages,
  					0, &pages[buffers]);

  
  		if (unlikely(error <= 0))
  			break;
  
  		/*
  		 * Fill this contiguous range into the partial page map.
  		 */
  		for (i = 0; i < error; i++) {

  			const int plen = min_t(size_t, len, PAGE_SIZE - off);

  
  			partial[buffers].offset = off;
  			partial[buffers].len = plen;
  
  			off = 0;
  			len -= plen;
  			buffers++;
  		}
  
  		/*
  		 * We didn't complete this iov, stop here since it probably
  		 * means we have to move some of this into a pipe to
  		 * be able to continue.
  		 */
  		if (len)
  			break;
  
  		/*
  		 * Don't continue if we mapped fewer pages than we asked for,
  		 * or if we mapped the max number of pages that we have
  		 * room for.
  		 */

  		if (error < npages || buffers == pipe_buffers)

  			break;
  
  		nr_vecs--;
  		iov++;
  	}

  	if (buffers)
  		return buffers;
  
  	return error;
  }

  static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
  			struct splice_desc *sd)
  {
  	char *src;
  	int ret;

  	/*
  	 * See if we can use the atomic maps, by prefaulting in the
  	 * pages and doing an atomic copy
  	 */
  	if (!fault_in_pages_writeable(sd->u.userptr, sd->len)) {
  		src = buf->ops->map(pipe, buf, 1);
  		ret = __copy_to_user_inatomic(sd->u.userptr, src + buf->offset,
  							sd->len);
  		buf->ops->unmap(pipe, buf, src);
  		if (!ret) {
  			ret = sd->len;
  			goto out;
  		}
  	}
  
  	/*
  	 * No dice, use slow non-atomic map and copy
   	 */
  	src = buf->ops->map(pipe, buf, 0);
  
  	ret = sd->len;
  	if (copy_to_user(sd->u.userptr, src + buf->offset, sd->len))
  		ret = -EFAULT;

  	buf->ops->unmap(pipe, buf, src);

  out:
  	if (ret > 0)
  		sd->u.userptr += ret;

  	return ret;
  }
  
  /*
   * For lack of a better implementation, implement vmsplice() to userspace
   * as a simple copy of the pipes pages to the user iov.
   */
  static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
  			     unsigned long nr_segs, unsigned int flags)
  {
  	struct pipe_inode_info *pipe;
  	struct splice_desc sd;
  	ssize_t size;
  	int error;
  	long ret;

  	pipe = get_pipe_info(file);

  	if (!pipe)
  		return -EBADF;

  	pipe_lock(pipe);

  
  	error = ret = 0;
  	while (nr_segs) {
  		void __user *base;
  		size_t len;
  
  		/*
  		 * Get user address base and length for this iovec.
  		 */
  		error = get_user(base, &iov->iov_base);
  		if (unlikely(error))
  			break;
  		error = get_user(len, &iov->iov_len);
  		if (unlikely(error))
  			break;
  
  		/*
  		 * Sanity check this iovec. 0 read succeeds.
  		 */
  		if (unlikely(!len))
  			break;
  		if (unlikely(!base)) {
  			error = -EFAULT;
  			break;
  		}

  		if (unlikely(!access_ok(VERIFY_WRITE, base, len))) {
  			error = -EFAULT;
  			break;
  		}

  		sd.len = 0;
  		sd.total_len = len;
  		sd.flags = flags;
  		sd.u.userptr = base;
  		sd.pos = 0;
  
  		size = __splice_from_pipe(pipe, &sd, pipe_to_user);
  		if (size < 0) {
  			if (!ret)
  				ret = size;
  
  			break;
  		}
  
  		ret += size;
  
  		if (size < len)
  			break;
  
  		nr_segs--;
  		iov++;
  	}

  	pipe_unlock(pipe);

  
  	if (!ret)
  		ret = error;
  
  	return ret;
  }

  /*
   * vmsplice splices a user address range into a pipe. It can be thought of
   * as splice-from-memory, where the regular splice is splice-from-file (or
   * to file). In both cases the output is a pipe, naturally.

   */

  static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
  			     unsigned long nr_segs, unsigned int flags)

  {

  	struct pipe_inode_info *pipe;

  	struct page *pages[PIPE_DEF_BUFFERS];
  	struct partial_page partial[PIPE_DEF_BUFFERS];

  	struct splice_pipe_desc spd = {
  		.pages = pages,
  		.partial = partial,
  		.flags = flags,
  		.ops = &user_page_pipe_buf_ops,

  		.spd_release = spd_release_page,

  	};

  	long ret;

  	pipe = get_pipe_info(file);

  	if (!pipe)

  		return -EBADF;

  	if (splice_grow_spd(pipe, &spd))
  		return -ENOMEM;
  
  	spd.nr_pages = get_iovec_page_array(iov, nr_segs, spd.pages,
  					    spd.partial, flags & SPLICE_F_GIFT,
  					    pipe->buffers);

  	if (spd.nr_pages <= 0)

  		ret = spd.nr_pages;
  	else
  		ret = splice_to_pipe(pipe, &spd);

  	splice_shrink_spd(pipe, &spd);
  	return ret;

  }

  /*
   * Note that vmsplice only really supports true splicing _from_ user memory
   * to a pipe, not the other way around. Splicing from user memory is a simple
   * operation that can be supported without any funky alignment restrictions
   * or nasty vm tricks. We simply map in the user memory and fill them into
   * a pipe. The reverse isn't quite as easy, though. There are two possible
   * solutions for that:
   *
   *	- memcpy() the data internally, at which point we might as well just
   *	  do a regular read() on the buffer anyway.
   *	- Lots of nasty vm tricks, that are neither fast nor flexible (it
   *	  has restriction limitations on both ends of the pipe).
   *
   * Currently we punt and implement it as a normal copy, see pipe_to_user().
   *
   */

  SYSCALL_DEFINE4(vmsplice, int, fd, const struct iovec __user *, iov,
  		unsigned long, nr_segs, unsigned int, flags)

  {
  	struct file *file;
  	long error;
  	int fput;

  	if (unlikely(nr_segs > UIO_MAXIOV))
  		return -EINVAL;
  	else if (unlikely(!nr_segs))
  		return 0;

  	error = -EBADF;
  	file = fget_light(fd, &fput);
  	if (file) {
  		if (file->f_mode & FMODE_WRITE)

  			error = vmsplice_to_pipe(file, iov, nr_segs, flags);
  		else if (file->f_mode & FMODE_READ)
  			error = vmsplice_to_user(file, iov, nr_segs, flags);

  
  		fput_light(file, fput);
  	}
  
  	return error;
  }

  SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
  		int, fd_out, loff_t __user *, off_out,
  		size_t, len, unsigned int, flags)

  {
  	long error;
  	struct file *in, *out;
  	int fput_in, fput_out;
  
  	if (unlikely(!len))
  		return 0;
  
  	error = -EBADF;

  	in = fget_light(fd_in, &fput_in);

  	if (in) {
  		if (in->f_mode & FMODE_READ) {

  			out = fget_light(fd_out, &fput_out);

  			if (out) {
  				if (out->f_mode & FMODE_WRITE)

  					error = do_splice(in, off_in,
  							  out, off_out,
  							  len, flags);

  				fput_light(out, fput_out);
  			}
  		}
  
  		fput_light(in, fput_in);
  	}
  
  	return error;
  }

  
  /*

   * Make sure there's data to read. Wait for input if we can, otherwise
   * return an appropriate error.
   */

  static int ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)

  {
  	int ret;
  
  	/*
  	 * Check ->nrbufs without the inode lock first. This function
  	 * is speculative anyways, so missing one is ok.
  	 */
  	if (pipe->nrbufs)
  		return 0;
  
  	ret = 0;

  	pipe_lock(pipe);

  
  	while (!pipe->nrbufs) {
  		if (signal_pending(current)) {
  			ret = -ERESTARTSYS;
  			break;
  		}
  		if (!pipe->writers)
  			break;
  		if (!pipe->waiting_writers) {
  			if (flags & SPLICE_F_NONBLOCK) {
  				ret = -EAGAIN;
  				break;
  			}
  		}
  		pipe_wait(pipe);
  	}

  	pipe_unlock(pipe);

  	return ret;
  }
  
  /*
   * Make sure there's writeable room. Wait for room if we can, otherwise
   * return an appropriate error.
   */

  static int opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)

  {
  	int ret;
  
  	/*
  	 * Check ->nrbufs without the inode lock first. This function
  	 * is speculative anyways, so missing one is ok.
  	 */

  	if (pipe->nrbufs < pipe->buffers)

  		return 0;
  
  	ret = 0;

  	pipe_lock(pipe);

  	while (pipe->nrbufs >= pipe->buffers) {

  		if (!pipe->readers) {
  			send_sig(SIGPIPE, current, 0);
  			ret = -EPIPE;
  			break;
  		}
  		if (flags & SPLICE_F_NONBLOCK) {
  			ret = -EAGAIN;
  			break;
  		}
  		if (signal_pending(current)) {
  			ret = -ERESTARTSYS;
  			break;
  		}
  		pipe->waiting_writers++;
  		pipe_wait(pipe);
  		pipe->waiting_writers--;
  	}

  	pipe_unlock(pipe);

  	return ret;
  }
  
  /*

   * Splice contents of ipipe to opipe.
   */
  static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
  			       struct pipe_inode_info *opipe,
  			       size_t len, unsigned int flags)
  {
  	struct pipe_buffer *ibuf, *obuf;
  	int ret = 0, nbuf;
  	bool input_wakeup = false;
  
  
  retry:
  	ret = ipipe_prep(ipipe, flags);
  	if (ret)
  		return ret;
  
  	ret = opipe_prep(opipe, flags);
  	if (ret)
  		return ret;
  
  	/*
  	 * Potential ABBA deadlock, work around it by ordering lock
  	 * grabbing by pipe info address. Otherwise two different processes
  	 * could deadlock (one doing tee from A -> B, the other from B -> A).
  	 */
  	pipe_double_lock(ipipe, opipe);
  
  	do {
  		if (!opipe->readers) {
  			send_sig(SIGPIPE, current, 0);
  			if (!ret)
  				ret = -EPIPE;
  			break;
  		}
  
  		if (!ipipe->nrbufs && !ipipe->writers)
  			break;
  
  		/*
  		 * Cannot make any progress, because either the input
  		 * pipe is empty or the output pipe is full.
  		 */

  		if (!ipipe->nrbufs || opipe->nrbufs >= opipe->buffers) {

  			/* Already processed some buffers, break */
  			if (ret)
  				break;
  
  			if (flags & SPLICE_F_NONBLOCK) {
  				ret = -EAGAIN;
  				break;
  			}
  
  			/*
  			 * We raced with another reader/writer and haven't
  			 * managed to process any buffers.  A zero return
  			 * value means EOF, so retry instead.
  			 */
  			pipe_unlock(ipipe);
  			pipe_unlock(opipe);
  			goto retry;
  		}
  
  		ibuf = ipipe->bufs + ipipe->curbuf;

  		nbuf = (opipe->curbuf + opipe->nrbufs) & (opipe->buffers - 1);

  		obuf = opipe->bufs + nbuf;
  
  		if (len >= ibuf->len) {
  			/*
  			 * Simply move the whole buffer from ipipe to opipe
  			 */
  			*obuf = *ibuf;
  			ibuf->ops = NULL;
  			opipe->nrbufs++;

  			ipipe->curbuf = (ipipe->curbuf + 1) & (ipipe->buffers - 1);