/*
   * pata-cs5535.c 	- CS5535 PATA for new ATA layer
   *			  (C) 2005-2006 Red Hat Inc

   *			  Alan Cox <alan@lxorguk.ukuu.org.uk>

   *
   * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and

   * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de>

   * and Alexander Kiausch <alex.kiausch@t-online.de>
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License version 2 as
   * published by the Free Software Foundation.
   *
   * This program is distributed in the hope that it will be useful,
   * but WITHOUT ANY WARRANTY; without even the implied warranty of
   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   * GNU General Public License for more details.
   *
   * You should have received a copy of the GNU General Public License
   * along with this program; if not, write to the Free Software
   * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
   *
   * Loosely based on the piix & svwks drivers.
   *
   * Documentation:
   *	Available from AMD web site.
   * TODO

   *	Review errata to see if serializing is necessary

   */
  
  #include <linux/kernel.h>
  #include <linux/module.h>
  #include <linux/pci.h>
  #include <linux/init.h>
  #include <linux/blkdev.h>
  #include <linux/delay.h>
  #include <scsi/scsi_host.h>
  #include <linux/libata.h>
  #include <asm/msr.h>

  #define DRV_NAME	"pata_cs5535"

  #define DRV_VERSION	"0.2.12"

  
  /*
   *	The Geode (Aka Athlon GX now) uses an internal MSR based
   *	bus system for control. Demented but there you go.
   */
  
  #define MSR_ATAC_BASE    	0x51300000
  #define ATAC_GLD_MSR_CAP 	(MSR_ATAC_BASE+0)
  #define ATAC_GLD_MSR_CONFIG    (MSR_ATAC_BASE+0x01)
  #define ATAC_GLD_MSR_SMI       (MSR_ATAC_BASE+0x02)
  #define ATAC_GLD_MSR_ERROR     (MSR_ATAC_BASE+0x03)
  #define ATAC_GLD_MSR_PM        (MSR_ATAC_BASE+0x04)
  #define ATAC_GLD_MSR_DIAG      (MSR_ATAC_BASE+0x05)
  #define ATAC_IO_BAR            (MSR_ATAC_BASE+0x08)
  #define ATAC_RESET             (MSR_ATAC_BASE+0x10)
  #define ATAC_CH0D0_PIO         (MSR_ATAC_BASE+0x20)
  #define ATAC_CH0D0_DMA         (MSR_ATAC_BASE+0x21)
  #define ATAC_CH0D1_PIO         (MSR_ATAC_BASE+0x22)
  #define ATAC_CH0D1_DMA         (MSR_ATAC_BASE+0x23)
  #define ATAC_PCI_ABRTERR       (MSR_ATAC_BASE+0x24)
  
  #define ATAC_BM0_CMD_PRIM      0x00
  #define ATAC_BM0_STS_PRIM      0x02
  #define ATAC_BM0_PRD           0x04
  
  #define CS5535_CABLE_DETECT    0x48

  /**

   *	cs5535_cable_detect	-	detect cable type

   *	@ap: Port to detect on
   *
   *	Perform cable detection for ATA66 capable cable. Return a libata
   *	cable type.
   */

  static int cs5535_cable_detect(struct ata_port *ap)

  {
  	u8 cable;
  	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  
  	pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
  	if (cable & 1)

  		return ATA_CBL_PATA80;

  	else

  		return ATA_CBL_PATA40;

  }
  
  /**
   *	cs5535_set_piomode		-	PIO setup
   *	@ap: ATA interface
   *	@adev: device on the interface
   *
   *	Set our PIO requirements. The CS5535 is pretty clean about all this
   */
  
  static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
  {
  	static const u16 pio_timings[5] = {

  		0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131

  	};
  	static const u16 pio_cmd_timings[5] = {
  		0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
  	};
  	u32 reg, dummy;
  	struct ata_device *pair = ata_dev_pair(adev);
  
  	int mode = adev->pio_mode - XFER_PIO_0;
  	int cmdmode = mode;
  
  	/* Command timing has to be for the lowest of the pair of devices */
  	if (pair) {
  		int pairmode = pair->pio_mode - XFER_PIO_0;
  		cmdmode = min(mode, pairmode);
  		/* Write the other drive timing register if it changed */
  		if (cmdmode < pairmode)
  			wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
  				pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
  	}
  	/* Write the drive timing register */
  	wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
  		pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);
  
  	/* Set the PIO "format 1" bit in the DMA timing register */
  	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
  	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
  }
  
  /**
   *	cs5535_set_dmamode		-	DMA timing setup
   *	@ap: ATA interface
   *	@adev: Device being configured
   *
   */
  
  static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  {
  	static const u32 udma_timings[5] = {
  		0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
  	};
  	static const u32 mwdma_timings[3] = {
  		0x7F0FFFF3, 0x7F035352, 0x7F024241
  	};
  	u32 reg, dummy;
  	int mode = adev->dma_mode;
  
  	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
  	reg &= 0x80000000UL;
  	if (mode >= XFER_UDMA_0)
  		reg |= udma_timings[mode - XFER_UDMA_0];
  	else
  		reg |= mwdma_timings[mode - XFER_MW_DMA_0];
  	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
  }
  
  static struct scsi_host_template cs5535_sht = {

  	ATA_BMDMA_SHT(DRV_NAME),

  };
  
  static struct ata_port_operations cs5535_port_ops = {

  	.inherits	= &ata_bmdma_port_ops,
  	.cable_detect	= cs5535_cable_detect,

  	.set_piomode	= cs5535_set_piomode,
  	.set_dmamode	= cs5535_set_dmamode,

  };
  
  /**
   *	cs5535_init_one		-	Initialise a CS5530
   *	@dev: PCI device
   *	@id: Entry in match table
   *
   *	Install a driver for the newly found CS5530 companion chip. Most of
   *	this is just housekeeping. We have to set the chip up correctly and
   *	turn off various bits of emulation magic.
   */
  
  static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
  {

  	static const struct ata_port_info info = {

  		.flags = ATA_FLAG_SLAVE_POSS,

  		.pio_mask = ATA_PIO4,
  		.mwdma_mask = ATA_MWDMA2,

  		.udma_mask = ATA_UDMA4,

  		.port_ops = &cs5535_port_ops
  	};

  	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };

  	return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);

  }

  static const struct pci_device_id cs5535[] = {

  	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), },
  	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },

  
  	{ },

  };
  
  static struct pci_driver cs5535_pci_driver = {
  	.name		= DRV_NAME,
  	.id_table	= cs5535,
  	.probe 		= cs5535_init_one,

  	.remove		= ata_pci_remove_one,

  #ifdef CONFIG_PM

  	.suspend	= ata_pci_device_suspend,
  	.resume		= ata_pci_device_resume,

  #endif

  };
  
  static int __init cs5535_init(void)
  {
  	return pci_register_driver(&cs5535_pci_driver);
  }

  static void __exit cs5535_exit(void)
  {
  	pci_unregister_driver(&cs5535_pci_driver);
  }

  MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");

  MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");

  MODULE_LICENSE("GPL");
  MODULE_DEVICE_TABLE(pci, cs5535);
  MODULE_VERSION(DRV_VERSION);
  
  module_init(cs5535_init);
  module_exit(cs5535_exit);