Blame view
drivers/macintosh/therm_adt746x.c
17.9 KB
1da177e4c Linux-2.6.12-rc2 |
1 2 3 4 5 |
/* * Device driver for the i2c thermostat found on the iBook G4, Albook G4 * * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt * |
631dd1a88 Update broken web... |
6 7 8 |
* Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467 * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460 |
1da177e4c Linux-2.6.12-rc2 |
9 10 |
* */ |
1da177e4c Linux-2.6.12-rc2 |
11 12 13 14 15 16 17 18 19 20 |
#include <linux/types.h> #include <linux/module.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/sched.h> #include <linux/i2c.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/spinlock.h> |
1da177e4c Linux-2.6.12-rc2 |
21 22 23 24 |
#include <linux/wait.h> #include <linux/suspend.h> #include <linux/kthread.h> #include <linux/moduleparam.h> |
7dfb71030 [PATCH] Add inclu... |
25 |
#include <linux/freezer.h> |
ad9e05aef macintosh: Use li... |
26 |
#include <linux/of_platform.h> |
1da177e4c Linux-2.6.12-rc2 |
27 28 29 30 31 32 |
#include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> #include <asm/system.h> #include <asm/sections.h> |
1da177e4c Linux-2.6.12-rc2 |
33 34 35 36 37 38 |
#undef DEBUG #define CONFIG_REG 0x40 #define MANUAL_MASK 0xe0 #define AUTO_MASK 0x20 |
0512a9a8e therm_adt746x: Al... |
39 |
#define INVERT_MASK 0x10 |
1da177e4c Linux-2.6.12-rc2 |
40 |
|
d20c507f2 [PATCH] therm_adt... |
41 42 |
static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */ static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */ |
1da177e4c Linux-2.6.12-rc2 |
43 44 45 46 |
static u8 MANUAL_MODE[2] = {0x5c, 0x5d}; static u8 REM_CONTROL[2] = {0x00, 0x40}; static u8 FAN_SPEED[2] = {0x28, 0x2a}; static u8 FAN_SPD_SET[2] = {0x30, 0x31}; |
d20c507f2 [PATCH] therm_adt... |
47 48 |
static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */ static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */ |
872758563 [POWERPC] move va... |
49 |
static const char *sensor_location[3]; |
1da177e4c Linux-2.6.12-rc2 |
50 |
|
872758563 [POWERPC] move va... |
51 |
static int limit_adjust; |
1da177e4c Linux-2.6.12-rc2 |
52 |
static int fan_speed = -1; |
90ab5ee94 module_param: mak... |
53 |
static bool verbose; |
1da177e4c Linux-2.6.12-rc2 |
54 55 56 57 58 59 60 |
MODULE_AUTHOR("Colin Leroy <colin@colino.net>"); MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and " "Powerbook G4 Alu"); MODULE_LICENSE("GPL"); module_param(limit_adjust, int, 0644); |
d20c507f2 [PATCH] therm_adt... |
61 |
MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) " |
1da177e4c Linux-2.6.12-rc2 |
62 63 64 65 66 |
"by N degrees."); module_param(fan_speed, int, 0644); MODULE_PARM_DESC(fan_speed,"Specify starting fan speed (0-255) " "(default 64)"); |
9f6d4b0c2 [PATCH] therm_adt... |
67 68 69 |
module_param(verbose, bool, 0); MODULE_PARM_DESC(verbose,"Verbose log operations " "(default 0)"); |
1da177e4c Linux-2.6.12-rc2 |
70 |
struct thermostat { |
2e613e7f6 therm_adt746x: Co... |
71 |
struct i2c_client *clt; |
1da177e4c Linux-2.6.12-rc2 |
72 73 74 75 76 77 |
u8 temps[3]; u8 cached_temp[3]; u8 initial_limits[3]; u8 limits[3]; int last_speed[2]; int last_var[2]; |
1496e89ae powerpc/therm_adt... |
78 |
int pwm_inv[2]; |
1da177e4c Linux-2.6.12-rc2 |
79 80 81 82 |
}; static enum {ADT7460, ADT7467} therm_type; static int therm_bus, therm_address; |
2dc115813 of/device: Replac... |
83 |
static struct platform_device * of_dev; |
1da177e4c Linux-2.6.12-rc2 |
84 85 |
static struct thermostat* thermostat; static struct task_struct *thread_therm = NULL; |
1da177e4c Linux-2.6.12-rc2 |
86 87 |
static void write_both_fan_speed(struct thermostat *th, int speed); static void write_fan_speed(struct thermostat *th, int speed, int fan); |
33a470f6d macintosh/therm_a... |
88 89 |
static void thermostat_create_files(void); static void thermostat_remove_files(void); |
1da177e4c Linux-2.6.12-rc2 |
90 91 92 93 94 95 96 97 98 |
static int write_reg(struct thermostat* th, int reg, u8 data) { u8 tmp[2]; int rc; tmp[0] = reg; tmp[1] = data; |
2e613e7f6 therm_adt746x: Co... |
99 |
rc = i2c_master_send(th->clt, (const char *)tmp, 2); |
1da177e4c Linux-2.6.12-rc2 |
100 101 102 103 104 105 106 107 108 109 110 111 112 113 |
if (rc < 0) return rc; if (rc != 2) return -ENODEV; return 0; } static int read_reg(struct thermostat* th, int reg) { u8 reg_addr, data; int rc; reg_addr = (u8)reg; |
2e613e7f6 therm_adt746x: Co... |
114 |
rc = i2c_master_send(th->clt, ®_addr, 1); |
1da177e4c Linux-2.6.12-rc2 |
115 116 117 118 |
if (rc < 0) return rc; if (rc != 1) return -ENODEV; |
2e613e7f6 therm_adt746x: Co... |
119 |
rc = i2c_master_recv(th->clt, (char *)&data, 1); |
1da177e4c Linux-2.6.12-rc2 |
120 121 122 123 |
if (rc < 0) return rc; return data; } |
6f6b35e13 macintosh: Don't ... |
124 |
static struct i2c_driver thermostat_driver; |
1da177e4c Linux-2.6.12-rc2 |
125 126 127 128 |
static int attach_thermostat(struct i2c_adapter *adapter) { unsigned long bus_no; |
2e613e7f6 therm_adt746x: Co... |
129 130 |
struct i2c_board_info info; struct i2c_client *client; |
1da177e4c Linux-2.6.12-rc2 |
131 132 133 134 135 136 |
if (strncmp(adapter->name, "uni-n", 5)) return -ENODEV; bus_no = simple_strtoul(adapter->name + 6, NULL, 10); if (bus_no != therm_bus) return -ENODEV; |
2e613e7f6 therm_adt746x: Co... |
137 138 139 140 141 142 143 144 145 146 147 148 |
memset(&info, 0, sizeof(struct i2c_board_info)); strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE); info.addr = therm_address; client = i2c_new_device(adapter, &info); if (!client) return -ENODEV; /* * Let i2c-core delete that device on driver removal. * This is safe because i2c-core holds the core_lock mutex for us. */ |
6f6b35e13 macintosh: Don't ... |
149 |
list_add_tail(&client->detected, &thermostat_driver.clients); |
2e613e7f6 therm_adt746x: Co... |
150 |
return 0; |
1da177e4c Linux-2.6.12-rc2 |
151 152 153 |
} static int |
2e613e7f6 therm_adt746x: Co... |
154 |
remove_thermostat(struct i2c_client *client) |
1da177e4c Linux-2.6.12-rc2 |
155 |
{ |
2e613e7f6 therm_adt746x: Co... |
156 |
struct thermostat *th = i2c_get_clientdata(client); |
1da177e4c Linux-2.6.12-rc2 |
157 158 |
int i; |
33a470f6d macintosh/therm_a... |
159 |
thermostat_remove_files(); |
1da177e4c Linux-2.6.12-rc2 |
160 161 162 |
if (thread_therm != NULL) { kthread_stop(thread_therm); } |
9f6d4b0c2 [PATCH] therm_adt... |
163 |
|
1da177e4c Linux-2.6.12-rc2 |
164 165 166 167 168 169 |
printk(KERN_INFO "adt746x: Putting max temperatures back from " "%d, %d, %d to %d, %d, %d ", th->limits[0], th->limits[1], th->limits[2], th->initial_limits[0], th->initial_limits[1], th->initial_limits[2]); |
9f6d4b0c2 [PATCH] therm_adt... |
170 |
|
1da177e4c Linux-2.6.12-rc2 |
171 172 173 174 |
for (i = 0; i < 3; i++) write_reg(th, LIMIT_REG[i], th->initial_limits[i]); write_both_fan_speed(th, -1); |
1da177e4c Linux-2.6.12-rc2 |
175 176 177 178 179 180 |
thermostat = NULL; kfree(th); return 0; } |
1da177e4c Linux-2.6.12-rc2 |
181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 |
static int read_fan_speed(struct thermostat *th, u8 addr) { u8 tmp[2]; u16 res; /* should start with low byte */ tmp[1] = read_reg(th, addr); tmp[0] = read_reg(th, addr + 1); res = tmp[1] + (tmp[0] << 8); /* "a value of 0xffff means that the fan has stopped" */ return (res == 0xffff ? 0 : (90000*60)/res); } static void write_both_fan_speed(struct thermostat *th, int speed) { write_fan_speed(th, speed, 0); if (therm_type == ADT7460) write_fan_speed(th, speed, 1); } static void write_fan_speed(struct thermostat *th, int speed, int fan) { u8 manual; if (speed > 0xff) speed = 0xff; else if (speed < -1) speed = 0; if (therm_type == ADT7467 && fan == 1) return; if (th->last_speed[fan] != speed) { |
9f6d4b0c2 [PATCH] therm_adt... |
215 216 217 218 219 220 221 222 223 224 |
if (verbose) { if (speed == -1) printk(KERN_DEBUG "adt746x: Setting speed to automatic " "for %s fan. ", sensor_location[fan+1]); else printk(KERN_DEBUG "adt746x: Setting speed to %d " "for %s fan. ", speed, sensor_location[fan+1]); } |
1da177e4c Linux-2.6.12-rc2 |
225 226 227 228 229 |
} else return; if (speed >= 0) { manual = read_reg(th, MANUAL_MODE[fan]); |
1496e89ae powerpc/therm_adt... |
230 |
manual &= ~INVERT_MASK; |
0512a9a8e therm_adt746x: Al... |
231 |
write_reg(th, MANUAL_MODE[fan], |
1496e89ae powerpc/therm_adt... |
232 |
manual | MANUAL_MASK | th->pwm_inv[fan]); |
1da177e4c Linux-2.6.12-rc2 |
233 234 235 236 237 238 |
write_reg(th, FAN_SPD_SET[fan], speed); } else { /* back to automatic */ if(therm_type == ADT7460) { manual = read_reg(th, MANUAL_MODE[fan]) & (~MANUAL_MASK); |
1496e89ae powerpc/therm_adt... |
239 240 |
manual &= ~INVERT_MASK; manual |= th->pwm_inv[fan]; |
1da177e4c Linux-2.6.12-rc2 |
241 242 243 244 |
write_reg(th, MANUAL_MODE[fan], manual|REM_CONTROL[fan]); } else { manual = read_reg(th, MANUAL_MODE[fan]); |
1496e89ae powerpc/therm_adt... |
245 246 |
manual &= ~INVERT_MASK; manual |= th->pwm_inv[fan]; |
1da177e4c Linux-2.6.12-rc2 |
247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 |
write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK)); } } th->last_speed[fan] = speed; } static void read_sensors(struct thermostat *th) { int i = 0; for (i = 0; i < 3; i++) th->temps[i] = read_reg(th, TEMP_REG[i]); } #ifdef DEBUG static void display_stats(struct thermostat *th) { if (th->temps[0] != th->cached_temp[0] || th->temps[1] != th->cached_temp[1] || th->temps[2] != th->cached_temp[2]) { printk(KERN_INFO "adt746x: Temperature infos:" " thermostats: %d,%d,%d;" " limits: %d,%d,%d;" " fan speed: %d RPM ", th->temps[0], th->temps[1], th->temps[2], th->limits[0], th->limits[1], th->limits[2], read_fan_speed(th, FAN_SPEED[0])); } th->cached_temp[0] = th->temps[0]; th->cached_temp[1] = th->temps[1]; th->cached_temp[2] = th->temps[2]; } #endif static void update_fans_speed (struct thermostat *th) { int lastvar = 0; /* last variation, for iBook */ int i = 0; /* we don't care about local sensor, so we start at sensor 1 */ for (i = 1; i < 3; i++) { int started = 0; int fan_number = (therm_type == ADT7460 && i == 2); int var = th->temps[i] - th->limits[i]; if (var > -1) { int step = (255 - fan_speed) / 7; int new_speed = 0; /* hysteresis : change fan speed only if variation is * more than two degrees */ if (abs(var - th->last_var[fan_number]) < 2) continue; started = 1; new_speed = fan_speed + ((var-1)*step); if (new_speed < fan_speed) new_speed = fan_speed; if (new_speed > 255) new_speed = 255; |
9f6d4b0c2 [PATCH] therm_adt... |
310 311 |
if (verbose) printk(KERN_DEBUG "adt746x: Setting fans speed to %d " |
8354be9c1 powerpc: Remove t... |
312 313 |
"(limit exceeded by %d on %s) ", |
9f6d4b0c2 [PATCH] therm_adt... |
314 315 |
new_speed, var, sensor_location[fan_number+1]); |
1da177e4c Linux-2.6.12-rc2 |
316 317 318 |
write_both_fan_speed(th, new_speed); th->last_var[fan_number] = var; } else if (var < -2) { |
d20c507f2 [PATCH] therm_adt... |
319 |
/* don't stop fan if sensor2 is cold and sensor1 is not |
1da177e4c Linux-2.6.12-rc2 |
320 321 322 |
* so cold (lastvar >= -1) */ if (i == 2 && lastvar < -1) { if (th->last_speed[fan_number] != 0) |
9f6d4b0c2 [PATCH] therm_adt... |
323 324 325 326 |
if (verbose) printk(KERN_DEBUG "adt746x: Stopping " "fans. "); |
1da177e4c Linux-2.6.12-rc2 |
327 328 329 330 331 332 333 334 |
write_both_fan_speed(th, 0); } } lastvar = var; if (started) return; /* we don't want to re-stop the fan |
d20c507f2 [PATCH] therm_adt... |
335 |
* if sensor1 is heating and sensor2 is not */ |
1da177e4c Linux-2.6.12-rc2 |
336 337 338 339 340 341 |
} } static int monitor_task(void *arg) { struct thermostat* th = arg; |
831441862 Freezer: make ker... |
342 |
set_freezable(); |
1da177e4c Linux-2.6.12-rc2 |
343 |
while(!kthread_should_stop()) { |
3e1d1d28d [PATCH] Cleanup p... |
344 |
try_to_freeze(); |
1da177e4c Linux-2.6.12-rc2 |
345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 |
msleep_interruptible(2000); #ifndef DEBUG if (fan_speed != -1) read_sensors(th); #else read_sensors(th); #endif if (fan_speed != -1) update_fans_speed(th); #ifdef DEBUG display_stats(th); #endif } return 0; } static void set_limit(struct thermostat *th, int i) { |
d20c507f2 [PATCH] therm_adt... |
368 |
/* Set sensor1 limit higher to avoid powerdowns */ |
1da177e4c Linux-2.6.12-rc2 |
369 370 371 372 373 374 |
th->limits[i] = default_limits_chip[i] + limit_adjust; write_reg(th, LIMIT_REG[i], th->limits[i]); /* set our limits to normal */ th->limits[i] = default_limits_local[i] + limit_adjust; } |
2e613e7f6 therm_adt746x: Co... |
375 376 |
static int probe_thermostat(struct i2c_client *client, const struct i2c_device_id *id) |
1da177e4c Linux-2.6.12-rc2 |
377 378 379 380 381 382 383 |
{ struct thermostat* th; int rc; int i; if (thermostat) return 0; |
cc61f957f [POWERPC] drivers... |
384 |
th = kzalloc(sizeof(struct thermostat), GFP_KERNEL); |
1da177e4c Linux-2.6.12-rc2 |
385 386 |
if (!th) return -ENOMEM; |
2e613e7f6 therm_adt746x: Co... |
387 388 |
i2c_set_clientdata(client, th); th->clt = client; |
1da177e4c Linux-2.6.12-rc2 |
389 |
|
99ca177ae powerpc/therm_adt... |
390 |
rc = read_reg(th, CONFIG_REG); |
1da177e4c Linux-2.6.12-rc2 |
391 |
if (rc < 0) { |
2e613e7f6 therm_adt746x: Co... |
392 393 |
dev_err(&client->dev, "Thermostat failed to read config! "); |
1da177e4c Linux-2.6.12-rc2 |
394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 |
kfree(th); return -ENODEV; } /* force manual control to start the fan quieter */ if (fan_speed == -1) fan_speed = 64; if(therm_type == ADT7460) { printk(KERN_INFO "adt746x: ADT7460 initializing "); /* The 7460 needs to be started explicitly */ write_reg(th, CONFIG_REG, 1); } else printk(KERN_INFO "adt746x: ADT7467 initializing "); for (i = 0; i < 3; i++) { th->initial_limits[i] = read_reg(th, LIMIT_REG[i]); set_limit(th, i); } |
9f6d4b0c2 [PATCH] therm_adt... |
415 |
|
1da177e4c Linux-2.6.12-rc2 |
416 417 418 419 420 421 422 423 |
printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d" " to %d, %d, %d ", th->initial_limits[0], th->initial_limits[1], th->initial_limits[2], th->limits[0], th->limits[1], th->limits[2]); thermostat = th; |
1496e89ae powerpc/therm_adt... |
424 425 426 |
/* record invert bit status because fw can corrupt it after suspend */ th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK; th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK; |
1da177e4c Linux-2.6.12-rc2 |
427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 |
/* be sure to really write fan speed the first time */ th->last_speed[0] = -2; th->last_speed[1] = -2; th->last_var[0] = -80; th->last_var[1] = -80; if (fan_speed != -1) { /* manual mode, stop fans */ write_both_fan_speed(th, 0); } else { /* automatic mode */ write_both_fan_speed(th, -1); } thread_therm = kthread_run(monitor_task, th, "kfand"); if (thread_therm == ERR_PTR(-ENOMEM)) { printk(KERN_INFO "adt746x: Kthread creation failed "); thread_therm = NULL; return -ENOMEM; } |
33a470f6d macintosh/therm_a... |
449 |
thermostat_create_files(); |
1da177e4c Linux-2.6.12-rc2 |
450 451 |
return 0; } |
2e613e7f6 therm_adt746x: Co... |
452 453 454 455 456 457 458 459 460 461 462 463 464 465 |
static const struct i2c_device_id therm_adt746x_id[] = { { "therm_adt746x", 0 }, { } }; static struct i2c_driver thermostat_driver = { .driver = { .name = "therm_adt746x", }, .attach_adapter = attach_thermostat, .probe = probe_thermostat, .remove = remove_thermostat, .id_table = therm_adt746x_id, }; |
1da177e4c Linux-2.6.12-rc2 |
466 467 468 469 470 |
/* * Now, unfortunately, sysfs doesn't give us a nice void * we could * pass around to the attribute functions, so we don't really have * choice but implement a bunch of them... * |
e404e274f [PATCH] Driver Co... |
471 |
* FIXME, it does now... |
1da177e4c Linux-2.6.12-rc2 |
472 473 |
*/ #define BUILD_SHOW_FUNC_INT(name, data) \ |
e404e274f [PATCH] Driver Co... |
474 |
static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4c Linux-2.6.12-rc2 |
475 476 477 478 |
{ \ return sprintf(buf, "%d ", data); \ } |
d20c507f2 [PATCH] therm_adt... |
479 |
#define BUILD_SHOW_FUNC_STR(name, data) \ |
e404e274f [PATCH] Driver Co... |
480 |
static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ |
d20c507f2 [PATCH] therm_adt... |
481 482 483 484 |
{ \ return sprintf(buf, "%s ", data); \ } |
1da177e4c Linux-2.6.12-rc2 |
485 |
#define BUILD_SHOW_FUNC_FAN(name, data) \ |
e404e274f [PATCH] Driver Co... |
486 |
static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4c Linux-2.6.12-rc2 |
487 488 489 490 491 492 493 494 495 |
{ \ return sprintf(buf, "%d (%d rpm) ", \ thermostat->last_speed[data], \ read_fan_speed(thermostat, FAN_SPEED[data]) \ ); \ } #define BUILD_STORE_FUNC_DEG(name, data) \ |
e404e274f [PATCH] Driver Co... |
496 |
static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \ |
1da177e4c Linux-2.6.12-rc2 |
497 498 499 500 |
{ \ int val; \ int i; \ val = simple_strtol(buf, NULL, 10); \ |
d20c507f2 [PATCH] therm_adt... |
501 502 |
printk(KERN_INFO "Adjusting limits by %d degrees ", val); \ |
1da177e4c Linux-2.6.12-rc2 |
503 504 505 506 507 508 509 |
limit_adjust = val; \ for (i=0; i < 3; i++) \ set_limit(thermostat, i); \ return n; \ } #define BUILD_STORE_FUNC_INT(name, data) \ |
e404e274f [PATCH] Driver Co... |
510 |
static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \ |
1da177e4c Linux-2.6.12-rc2 |
511 |
{ \ |
2e74778c7 therm_adt746x: Fi... |
512 513 |
int val; \ val = simple_strtol(buf, NULL, 10); \ |
1da177e4c Linux-2.6.12-rc2 |
514 515 516 517 518 519 520 |
if (val < 0 || val > 255) \ return -EINVAL; \ printk(KERN_INFO "Setting specified fan speed to %d ", val); \ data = val; \ return n; \ } |
d20c507f2 [PATCH] therm_adt... |
521 522 523 524 525 526 |
BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(thermostat, TEMP_REG[1]))) BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(thermostat, TEMP_REG[2]))) BUILD_SHOW_FUNC_INT(sensor1_limit, thermostat->limits[1]) BUILD_SHOW_FUNC_INT(sensor2_limit, thermostat->limits[2]) BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1]) BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2]) |
1da177e4c Linux-2.6.12-rc2 |
527 528 |
BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed) |
d20c507f2 [PATCH] therm_adt... |
529 530 |
BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0) BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1) |
1da177e4c Linux-2.6.12-rc2 |
531 532 533 534 535 |
BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed) BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust) BUILD_STORE_FUNC_DEG(limit_adjust, thermostat) |
d20c507f2 [PATCH] therm_adt... |
536 537 538 539 540 541 542 543 544 545 546 547 |
static DEVICE_ATTR(sensor1_temperature, S_IRUGO, show_sensor1_temperature,NULL); static DEVICE_ATTR(sensor2_temperature, S_IRUGO, show_sensor2_temperature,NULL); static DEVICE_ATTR(sensor1_limit, S_IRUGO, show_sensor1_limit, NULL); static DEVICE_ATTR(sensor2_limit, S_IRUGO, show_sensor2_limit, NULL); static DEVICE_ATTR(sensor1_location, S_IRUGO, show_sensor1_location, NULL); static DEVICE_ATTR(sensor2_location, S_IRUGO, show_sensor2_location, NULL); |
1da177e4c Linux-2.6.12-rc2 |
548 549 550 |
static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, show_specified_fan_speed,store_specified_fan_speed); |
d20c507f2 [PATCH] therm_adt... |
551 552 553 554 |
static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO, show_sensor1_fan_speed, NULL); static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO, show_sensor2_fan_speed, NULL); |
1da177e4c Linux-2.6.12-rc2 |
555 556 557 558 559 560 561 562 563 |
static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, show_limit_adjust, store_limit_adjust); static int __init thermostat_init(void) { struct device_node* np; |
018a3d1db [POWERPC] powerma... |
564 |
const u32 *prop; |
d20c507f2 [PATCH] therm_adt... |
565 |
int i = 0, offset = 0; |
44ea9c809 drivers/macintosh... |
566 |
|
1da177e4c Linux-2.6.12-rc2 |
567 568 569 |
np = of_find_node_by_name(NULL, "fan"); if (!np) return -ENODEV; |
55b61fec2 [POWERPC] Rename ... |
570 |
if (of_device_is_compatible(np, "adt7460")) |
1da177e4c Linux-2.6.12-rc2 |
571 |
therm_type = ADT7460; |
55b61fec2 [POWERPC] Rename ... |
572 |
else if (of_device_is_compatible(np, "adt7467")) |
1da177e4c Linux-2.6.12-rc2 |
573 |
therm_type = ADT7467; |
958a65f20 [POWERPC] Add mis... |
574 575 |
else { of_node_put(np); |
1da177e4c Linux-2.6.12-rc2 |
576 |
return -ENODEV; |
958a65f20 [POWERPC] Add mis... |
577 |
} |
a8bacec09 [PATCH] Make sure... |
578 |
|
01b2726dd [POWERPC] Rename ... |
579 |
prop = of_get_property(np, "hwsensor-params-version", NULL); |
a8bacec09 [PATCH] Make sure... |
580 581 582 |
printk(KERN_INFO "adt746x: version %d (%ssupported) ", *prop, (*prop == 1)?"":"un"); |
958a65f20 [POWERPC] Add mis... |
583 584 |
if (*prop != 1) { of_node_put(np); |
a8bacec09 [PATCH] Make sure... |
585 |
return -ENODEV; |
958a65f20 [POWERPC] Add mis... |
586 |
} |
1da177e4c Linux-2.6.12-rc2 |
587 |
|
01b2726dd [POWERPC] Rename ... |
588 |
prop = of_get_property(np, "reg", NULL); |
958a65f20 [POWERPC] Add mis... |
589 590 |
if (!prop) { of_node_put(np); |
1da177e4c Linux-2.6.12-rc2 |
591 |
return -ENODEV; |
958a65f20 [POWERPC] Add mis... |
592 |
} |
1da177e4c Linux-2.6.12-rc2 |
593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 |
/* look for bus either by path or using "reg" */ if (strstr(np->full_name, "/i2c-bus@") != NULL) { const char *tmp_bus = (strstr(np->full_name, "/i2c-bus@") + 9); therm_bus = tmp_bus[0]-'0'; } else { therm_bus = ((*prop) >> 8) & 0x0f; } therm_address = ((*prop) & 0xff) >> 1; printk(KERN_INFO "adt746x: Thermostat bus: %d, address: 0x%02x, " "limit_adjust: %d, fan_speed: %d ", therm_bus, therm_address, limit_adjust, fan_speed); |
01b2726dd [POWERPC] Rename ... |
608 |
if (of_get_property(np, "hwsensor-location", NULL)) { |
d20c507f2 [PATCH] therm_adt... |
609 |
for (i = 0; i < 3; i++) { |
01b2726dd [POWERPC] Rename ... |
610 |
sensor_location[i] = of_get_property(np, |
d20c507f2 [PATCH] therm_adt... |
611 612 613 614 615 616 617 618 619 620 621 622 623 624 |
"hwsensor-location", NULL) + offset; if (sensor_location[i] == NULL) sensor_location[i] = ""; printk(KERN_INFO "sensor %d: %s ", i, sensor_location[i]); offset += strlen(sensor_location[i]) + 1; } } else { sensor_location[0] = "?"; sensor_location[1] = "?"; sensor_location[2] = "?"; } |
0365ba7fb [PATCH] ppc64: SM... |
625 |
of_dev = of_platform_device_create(np, "temperatures", NULL); |
44ea9c809 drivers/macintosh... |
626 |
of_node_put(np); |
1da177e4c Linux-2.6.12-rc2 |
627 628 629 630 631 |
if (of_dev == NULL) { printk(KERN_ERR "Can't register temperatures device ! "); return -ENODEV; } |
44ea9c809 drivers/macintosh... |
632 |
|
33a470f6d macintosh/therm_a... |
633 634 635 636 637 638 639 640 641 642 |
#ifndef CONFIG_I2C_POWERMAC request_module("i2c-powermac"); #endif return i2c_add_driver(&thermostat_driver); } static void thermostat_create_files(void) { int err; |
10804f0fb [POWERPC] therm_a... |
643 644 645 646 647 648 649 650 651 |
err = device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature); err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature); err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_limit); err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_limit); err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_location); err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_location); err |= device_create_file(&of_dev->dev, &dev_attr_limit_adjust); err |= device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed); err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed); |
1da177e4c Linux-2.6.12-rc2 |
652 |
if(therm_type == ADT7460) |
10804f0fb [POWERPC] therm_a... |
653 654 655 |
err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed); if (err) printk(KERN_WARNING |
25985edce Fix common misspe... |
656 657 |
"Failed to create temperature attribute file(s). "); |
1da177e4c Linux-2.6.12-rc2 |
658 |
} |
33a470f6d macintosh/therm_a... |
659 |
static void thermostat_remove_files(void) |
1da177e4c Linux-2.6.12-rc2 |
660 661 |
{ if (of_dev) { |
d20c507f2 [PATCH] therm_adt... |
662 663 664 665 666 667 |
device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature); device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature); device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit); device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit); device_remove_file(&of_dev->dev, &dev_attr_sensor1_location); device_remove_file(&of_dev->dev, &dev_attr_sensor2_location); |
1da177e4c Linux-2.6.12-rc2 |
668 669 |
device_remove_file(&of_dev->dev, &dev_attr_limit_adjust); device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed); |
d20c507f2 [PATCH] therm_adt... |
670 |
device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed); |
1da177e4c Linux-2.6.12-rc2 |
671 672 673 |
if(therm_type == ADT7460) device_remove_file(&of_dev->dev, |
d20c507f2 [PATCH] therm_adt... |
674 |
&dev_attr_sensor2_fan_speed); |
1da177e4c Linux-2.6.12-rc2 |
675 |
|
1da177e4c Linux-2.6.12-rc2 |
676 |
} |
33a470f6d macintosh/therm_a... |
677 678 679 680 681 |
} static void __exit thermostat_exit(void) { |
1da177e4c Linux-2.6.12-rc2 |
682 |
i2c_del_driver(&thermostat_driver); |
33a470f6d macintosh/therm_a... |
683 |
of_device_unregister(of_dev); |
1da177e4c Linux-2.6.12-rc2 |
684 685 686 687 |
} module_init(thermostat_init); module_exit(thermostat_exit); |