/* 
   * ASCII values for a number of symbolic constants, printing functions,
   * etc.
   * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
   * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
   *   by D. Gilbert and aeb (20020609)

   * Update to SPC-4 T10/1713-D Rev 20, 22 May 2009, D. Gilbert 20090624

   */

  #include <linux/blkdev.h>
  #include <linux/module.h>
  #include <linux/kernel.h>
  
  #include <scsi/scsi.h>

  #include <scsi/scsi_cmnd.h>

  #include <scsi/scsi_device.h>
  #include <scsi/scsi_host.h>

  #include <scsi/scsi_eh.h>

  #include <scsi/scsi_dbg.h>

  
  
  
  /* Commands with service actions that change the command name */
  #define MAINTENANCE_IN 0xa3
  #define MAINTENANCE_OUT 0xa4
  #define SERVICE_ACTION_IN_12 0xab
  #define SERVICE_ACTION_OUT_12 0xa9
  #define SERVICE_ACTION_IN_16 0x9e
  #define SERVICE_ACTION_OUT_16 0x9f

  
  
  
  #ifdef CONFIG_SCSI_CONSTANTS
  static const char * cdb_byte0_names[] = {
  /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
  /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,

  	    "Reassign Blocks",

  /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,

  /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  

  /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
  	    "Reserve(6)",
  /* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",

  /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", 
  /* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
  /* 20-22 */  NULL, NULL, NULL,
  /* 23-28 */ "Read Format Capacities", "Set Window",

  	    "Read Capacity(10)", NULL, NULL, "Read(10)",
  /* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
              "Read updated block",
  /* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",

  /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", 

  /* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",

  	    "Read Defect Data(10)", 
  /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", 
              "Read Buffer", 

  /* 3d-3f */ "Update Block", "Read Long(10)",  "Write Long(10)",
  /* 40-41 */ "Change Definition", "Write Same(10)",

  /* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP",
  	    "Read density support", "Play audio(10)", "Get configuration",
  	    "Play audio msf", "Play audio track/index",

  /* 49-4f */ "Play track relative(10)", "Get event status notification",

              "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
              NULL,
  /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",

              "Reserve track", "Send OPC info", "Mode Select(10)",
  /* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
              "Mode Sense(10)", "Close track/session",

  /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
              "Persistent reserve out",
  /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
  /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
  /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,

  /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB",
  	    "Variable length",

  /* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",

              "Receive copy results",

  /* 85-89 */ "ATA command pass through(16)", "Access control in",
  	    "Access control out", "Read(16)", "Memory Export Out(16)",

  /* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes",

              "Write and verify(16)", "Verify(16)",
  /* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
              "Lock/unlock cache(16)", "Write same(16)", NULL,

  /* 95-99 */ NULL, NULL, NULL, NULL, NULL,

  /* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
              "Service action out(16)",
  /* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
              "Security protocol in", "Maintenance in", "Maintenance out",
  	    "Move medium/play audio(12)",

  /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
              "Play track relative(12)",
  /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
              "Read DVD structure", "Write and verify(12)",
  /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
  /* b2-b4 */ "Search data low(12)", "Set limits(12)",
              "Read element status attached",

  /* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",

  /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
  /* ba-bc */ "Redundancy group (in), Scan",

              "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
  /* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
              "Volume set (out), Send DVD structure",

  };
  
  struct value_name_pair {
  	int value;
  	const char * name;
  };
  
  static const struct value_name_pair maint_in_arr[] = {

  	{0x5, "Report identifying information"},

  	{0xa, "Report target port groups"},
  	{0xb, "Report aliases"},
  	{0xc, "Report supported operation codes"},
  	{0xd, "Report supported task management functions"},
  	{0xe, "Report priority"},

  	{0xf, "Report timestamp"},

  	{0x10, "Management protocol in"},

  };

  #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)

  
  static const struct value_name_pair maint_out_arr[] = {

  	{0x6, "Set identifying information"},

  	{0xa, "Set target port groups"},
  	{0xb, "Change aliases"},
  	{0xe, "Set priority"},

  	{0xf, "Set timestamp"},
  	{0x10, "Management protocol out"},

  };

  #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)

  
  static const struct value_name_pair serv_in12_arr[] = {
  	{0x1, "Read media serial number"},
  };

  #define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr)

  
  static const struct value_name_pair serv_out12_arr[] = {
  	{-1, "dummy entry"},
  };

  #define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)

  
  static const struct value_name_pair serv_in16_arr[] = {
  	{0x10, "Read capacity(16)"},
  	{0x11, "Read long(16)"},

  	{0x12, "Get LBA status"},

  };

  #define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)

  
  static const struct value_name_pair serv_out16_arr[] = {
  	{0x11, "Write long(16)"},
  	{0x1f, "Notify data transfer device(16)"},
  };

  #define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)

  
  static const struct value_name_pair variable_length_arr[] = {
  	{0x1, "Rebuild(32)"},
  	{0x2, "Regenerate(32)"},
  	{0x3, "Xdread(32)"},
  	{0x4, "Xdwrite(32)"},
  	{0x5, "Xdwrite extended(32)"},
  	{0x6, "Xpwrite(32)"},
  	{0x7, "Xdwriteread(32)"},
  	{0x8, "Xdwrite extended(64)"},
  	{0x9, "Read(32)"},
  	{0xa, "Verify(32)"},
  	{0xb, "Write(32)"},
  	{0xc, "Write an verify(32)"},
  	{0xd, "Write same(32)"},
  	{0x8801, "Format OSD"},
  	{0x8802, "Create (osd)"},
  	{0x8803, "List (osd)"},
  	{0x8805, "Read (osd)"},
  	{0x8806, "Write (osd)"},
  	{0x8807, "Append (osd)"},
  	{0x8808, "Flush (osd)"},
  	{0x880a, "Remove (osd)"},
  	{0x880b, "Create partition (osd)"},
  	{0x880c, "Remove partition (osd)"},
  	{0x880e, "Get attributes (osd)"},
  	{0x880f, "Set attributes (osd)"},
  	{0x8812, "Create and write (osd)"},
  	{0x8815, "Create collection (osd)"},
  	{0x8816, "Remove collection (osd)"},
  	{0x8817, "List collection (osd)"},
  	{0x8818, "Set key (osd)"},
  	{0x8819, "Set master key (osd)"},
  	{0x881a, "Flush collection (osd)"},
  	{0x881b, "Flush partition (osd)"},
  	{0x881c, "Flush OSD"},
  	{0x8f7e, "Perform SCSI command (osd)"},
  	{0x8f7f, "Perform task management function (osd)"},
  };

  #define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr)

  
  static const char * get_sa_name(const struct value_name_pair * arr,
  			        int arr_sz, int service_action)
  {
  	int k;
  
  	for (k = 0; k < arr_sz; ++k, ++arr) {
  		if (service_action == arr->value)
  			break;
  	}
  	return (k < arr_sz) ? arr->name : NULL;
  }
  
  /* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */

  static void print_opcode_name(unsigned char * cdbp, int cdb_len)

  {
  	int sa, len, cdb0;
  	const char * name;

  
  	cdb0 = cdbp[0];
  	switch(cdb0) {
  	case VARIABLE_LENGTH_CMD:

  		len = scsi_varlen_cdb_length(cdbp);

  		if (len < 10) {

  			printk("short variable length command, "
  			       "len=%d ext_len=%d", len, cdb_len);

  			break;
  		}
  		sa = (cdbp[8] << 8) + cdbp[9];

  		name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ, sa);
  		if (name)

  			printk("%s", name);

  		else

  			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  
  		if ((cdb_len > 0) && (len != cdb_len))
  			printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);

  		break;
  	case MAINTENANCE_IN:
  		sa = cdbp[1] & 0x1f;
  		name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
  		if (name)

  			printk("%s", name);

  		else

  			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  		break;
  	case MAINTENANCE_OUT:
  		sa = cdbp[1] & 0x1f;
  		name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
  		if (name)

  			printk("%s", name);

  		else

  			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  		break;
  	case SERVICE_ACTION_IN_12:
  		sa = cdbp[1] & 0x1f;
  		name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
  		if (name)

  			printk("%s", name);

  		else

  			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  		break;
  	case SERVICE_ACTION_OUT_12:
  		sa = cdbp[1] & 0x1f;
  		name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
  		if (name)

  			printk("%s", name);

  		else

  			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  		break;
  	case SERVICE_ACTION_IN_16:
  		sa = cdbp[1] & 0x1f;
  		name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
  		if (name)

  			printk("%s", name);

  		else

  			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  		break;
  	case SERVICE_ACTION_OUT_16:
  		sa = cdbp[1] & 0x1f;
  		name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
  		if (name)

  			printk("%s", name);

  		else

  			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  		break;
  	default:
  		if (cdb0 < 0xc0) {
  			name = cdb_byte0_names[cdb0];
  			if (name)

  				printk("%s", name);

  			else

  				printk("cdb[0]=0x%x (reserved)", cdb0);

  		} else

  			printk("cdb[0]=0x%x (vendor)", cdb0);

  		break;
  	}
  }
  
  #else /* ifndef CONFIG_SCSI_CONSTANTS */

  static void print_opcode_name(unsigned char * cdbp, int cdb_len)

  {
  	int sa, len, cdb0;

  
  	cdb0 = cdbp[0];
  	switch(cdb0) {
  	case VARIABLE_LENGTH_CMD:

  		len = scsi_varlen_cdb_length(cdbp);

  		if (len < 10) {

  			printk("short opcode=0x%x command, len=%d "
  			       "ext_len=%d", cdb0, len, cdb_len);

  			break;
  		}
  		sa = (cdbp[8] << 8) + cdbp[9];

  		printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  		if (len != cdb_len)
  			printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
  		break;
  	case MAINTENANCE_IN:
  	case MAINTENANCE_OUT:
  	case SERVICE_ACTION_IN_12:
  	case SERVICE_ACTION_OUT_12:
  	case SERVICE_ACTION_IN_16:
  	case SERVICE_ACTION_OUT_16:
  		sa = cdbp[1] & 0x1f;

  		printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);

  		break;
  	default:
  		if (cdb0 < 0xc0)

  			printk("cdb[0]=0x%x", cdb0);

  		else

  			printk("cdb[0]=0x%x (vendor)", cdb0);

  		break;
  	}
  }
  #endif  

  void __scsi_print_command(unsigned char *cdb)

  {
  	int k, len;

  	print_opcode_name(cdb, 0);

  	len = scsi_command_size(cdb);

  	/* print out all bytes in cdb */
  	for (k = 0; k < len; ++k) 

  		printk(" %02x", cdb[k]);

  	printk("
  ");
  }
  EXPORT_SYMBOL(__scsi_print_command);

  void scsi_print_command(struct scsi_cmnd *cmd)

  {
  	int k;

  	if (cmd->cmnd == NULL)
  		return;

  	scmd_printk(KERN_INFO, cmd, "CDB: ");
  	print_opcode_name(cmd->cmnd, cmd->cmd_len);

  	/* print out all bytes in cdb */
  	printk(":");

  	for (k = 0; k < cmd->cmd_len; ++k)
  		printk(" %02x", cmd->cmnd[k]);

  	printk("
  ");
  }

  EXPORT_SYMBOL(scsi_print_command);

  
  /**

   *	scsi_print_status - print scsi status description

   *	@scsi_status: scsi status value
   *
   *	If the status is recognized, the description is printed.
   *	Otherwise "Unknown status" is output. No trailing space.
   *	If CONFIG_SCSI_CONSTANTS is not set, then print status in hex
   *	(e.g. "0x2" for Check Condition).
   **/
  void
  scsi_print_status(unsigned char scsi_status) {
  #ifdef CONFIG_SCSI_CONSTANTS
  	const char * ccp;
  
  	switch (scsi_status) {
  	case 0:    ccp = "Good"; break;
  	case 0x2:  ccp = "Check Condition"; break;
  	case 0x4:  ccp = "Condition Met"; break;
  	case 0x8:  ccp = "Busy"; break;
  	case 0x10: ccp = "Intermediate"; break;
  	case 0x14: ccp = "Intermediate-Condition Met"; break;
  	case 0x18: ccp = "Reservation Conflict"; break;
  	case 0x22: ccp = "Command Terminated"; break;	/* obsolete */
  	case 0x28: ccp = "Task set Full"; break;	/* was: Queue Full */
  	case 0x30: ccp = "ACA Active"; break;
  	case 0x40: ccp = "Task Aborted"; break;
  	default:   ccp = "Unknown status";
  	}
  	printk(KERN_INFO "%s", ccp);
  #else
  	printk(KERN_INFO "0x%0x", scsi_status);
  #endif
  }
  EXPORT_SYMBOL(scsi_print_status);
  
  #ifdef CONFIG_SCSI_CONSTANTS
  
  struct error_info {
  	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
  	const char * text;
  };

  /*
   * The canonical list of T10 Additional Sense Codes is available at:
   * http://www.t10.org/lists/asc-num.txt
   */
  static const struct error_info additional[] =

  {
  	{0x0000, "No additional sense information"},
  	{0x0001, "Filemark detected"},
  	{0x0002, "End-of-partition/medium detected"},
  	{0x0003, "Setmark detected"},
  	{0x0004, "Beginning-of-partition/medium detected"},
  	{0x0005, "End-of-data detected"},
  	{0x0006, "I/O process terminated"},

  	{0x0007, "Programmable early warning detected"},

  	{0x0011, "Audio play operation in progress"},
  	{0x0012, "Audio play operation paused"},
  	{0x0013, "Audio play operation successfully completed"},
  	{0x0014, "Audio play operation stopped due to error"},
  	{0x0015, "No current audio status to return"},
  	{0x0016, "Operation in progress"},
  	{0x0017, "Cleaning requested"},
  	{0x0018, "Erase operation in progress"},
  	{0x0019, "Locate operation in progress"},
  	{0x001A, "Rewind operation in progress"},
  	{0x001B, "Set capacity operation in progress"},
  	{0x001C, "Verify operation in progress"},

  	{0x001D, "ATA pass through information available"},

  	{0x001E, "Conflicting SA creation request"},

  
  	{0x0100, "No index/sector signal"},
  
  	{0x0200, "No seek complete"},
  
  	{0x0300, "Peripheral device write fault"},
  	{0x0301, "No write current"},
  	{0x0302, "Excessive write errors"},
  
  	{0x0400, "Logical unit not ready, cause not reportable"},
  	{0x0401, "Logical unit is in process of becoming ready"},

  	{0x0402, "Logical unit not ready, initializing command required"},

  	{0x0403, "Logical unit not ready, manual intervention required"},
  	{0x0404, "Logical unit not ready, format in progress"},
  	{0x0405, "Logical unit not ready, rebuild in progress"},
  	{0x0406, "Logical unit not ready, recalculation in progress"},
  	{0x0407, "Logical unit not ready, operation in progress"},
  	{0x0408, "Logical unit not ready, long write in progress"},
  	{0x0409, "Logical unit not ready, self-test in progress"},
  	{0x040A, "Logical unit not accessible, asymmetric access state "
  	 "transition"},
  	{0x040B, "Logical unit not accessible, target port in standby state"},
  	{0x040C, "Logical unit not accessible, target port in unavailable "
  	 "state"},

  	{0x040D, "Logical unit not ready, structure check required"},

  	{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
  	{0x0411, "Logical unit not ready, notify (enable spinup) required"},
  	{0x0412, "Logical unit not ready, offline"},

  	{0x0413, "Logical unit not ready, SA creation in progress"},
  	{0x0414, "Logical unit not ready, space allocation in progress"},

  
  	{0x0500, "Logical unit does not respond to selection"},
  
  	{0x0600, "No reference position found"},
  
  	{0x0700, "Multiple peripheral devices selected"},
  
  	{0x0800, "Logical unit communication failure"},
  	{0x0801, "Logical unit communication time-out"},
  	{0x0802, "Logical unit communication parity error"},
  	{0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
  	{0x0804, "Unreachable copy target"},
  
  	{0x0900, "Track following error"},
  	{0x0901, "Tracking servo failure"},
  	{0x0902, "Focus servo failure"},
  	{0x0903, "Spindle servo failure"},
  	{0x0904, "Head select fault"},
  
  	{0x0A00, "Error log overflow"},
  
  	{0x0B00, "Warning"},
  	{0x0B01, "Warning - specified temperature exceeded"},
  	{0x0B02, "Warning - enclosure degraded"},

  	{0x0B03, "Warning - background self-test failed"},
  	{0x0B04, "Warning - background pre-scan detected medium error"},
  	{0x0B05, "Warning - background medium scan detected medium error"},

  	{0x0B06, "Warning - non-volatile cache now volatile"},
  	{0x0B07, "Warning - degraded power to non-volatile cache"},
  	{0x0B08, "Warning - power loss expected"},

  
  	{0x0C00, "Write error"},
  	{0x0C01, "Write error - recovered with auto reallocation"},
  	{0x0C02, "Write error - auto reallocation failed"},
  	{0x0C03, "Write error - recommend reassignment"},
  	{0x0C04, "Compression check miscompare error"},
  	{0x0C05, "Data expansion occurred during compression"},
  	{0x0C06, "Block not compressible"},
  	{0x0C07, "Write error - recovery needed"},
  	{0x0C08, "Write error - recovery failed"},
  	{0x0C09, "Write error - loss of streaming"},
  	{0x0C0A, "Write error - padding blocks added"},
  	{0x0C0B, "Auxiliary memory write error"},
  	{0x0C0C, "Write error - unexpected unsolicited data"},
  	{0x0C0D, "Write error - not enough unsolicited data"},

  	{0x0C0F, "Defects in error window"},

  
  	{0x0D00, "Error detected by third party temporary initiator"},
  	{0x0D01, "Third party device failure"},
  	{0x0D02, "Copy target device not reachable"},
  	{0x0D03, "Incorrect copy target device type"},
  	{0x0D04, "Copy target device data underrun"},
  	{0x0D05, "Copy target device data overrun"},
  
  	{0x0E00, "Invalid information unit"},
  	{0x0E01, "Information unit too short"},
  	{0x0E02, "Information unit too long"},

  	{0x0E03, "Invalid field in command information unit"},

  
  	{0x1000, "Id CRC or ECC error"},

  	{0x1001, "Logical block guard check failed"},
  	{0x1002, "Logical block application tag check failed"},
  	{0x1003, "Logical block reference tag check failed"},

  
  	{0x1100, "Unrecovered read error"},
  	{0x1101, "Read retries exhausted"},
  	{0x1102, "Error too long to correct"},
  	{0x1103, "Multiple read errors"},
  	{0x1104, "Unrecovered read error - auto reallocate failed"},
  	{0x1105, "L-EC uncorrectable error"},
  	{0x1106, "CIRC unrecovered error"},
  	{0x1107, "Data re-synchronization error"},
  	{0x1108, "Incomplete block read"},
  	{0x1109, "No gap found"},
  	{0x110A, "Miscorrected error"},
  	{0x110B, "Unrecovered read error - recommend reassignment"},
  	{0x110C, "Unrecovered read error - recommend rewrite the data"},
  	{0x110D, "De-compression CRC error"},
  	{0x110E, "Cannot decompress using declared algorithm"},
  	{0x110F, "Error reading UPC/EAN number"},
  	{0x1110, "Error reading ISRC number"},
  	{0x1111, "Read error - loss of streaming"},
  	{0x1112, "Auxiliary memory read error"},
  	{0x1113, "Read error - failed retransmission request"},

  	{0x1114, "Read error - lba marked bad by application client"},

  
  	{0x1200, "Address mark not found for id field"},
  
  	{0x1300, "Address mark not found for data field"},
  
  	{0x1400, "Recorded entity not found"},
  	{0x1401, "Record not found"},
  	{0x1402, "Filemark or setmark not found"},
  	{0x1403, "End-of-data not found"},
  	{0x1404, "Block sequence error"},
  	{0x1405, "Record not found - recommend reassignment"},
  	{0x1406, "Record not found - data auto-reallocated"},
  	{0x1407, "Locate operation failure"},
  
  	{0x1500, "Random positioning error"},
  	{0x1501, "Mechanical positioning error"},
  	{0x1502, "Positioning error detected by read of medium"},
  
  	{0x1600, "Data synchronization mark error"},
  	{0x1601, "Data sync error - data rewritten"},
  	{0x1602, "Data sync error - recommend rewrite"},
  	{0x1603, "Data sync error - data auto-reallocated"},
  	{0x1604, "Data sync error - recommend reassignment"},
  
  	{0x1700, "Recovered data with no error correction applied"},
  	{0x1701, "Recovered data with retries"},
  	{0x1702, "Recovered data with positive head offset"},
  	{0x1703, "Recovered data with negative head offset"},
  	{0x1704, "Recovered data with retries and/or circ applied"},
  	{0x1705, "Recovered data using previous sector id"},
  	{0x1706, "Recovered data without ECC - data auto-reallocated"},
  	{0x1707, "Recovered data without ECC - recommend reassignment"},
  	{0x1708, "Recovered data without ECC - recommend rewrite"},
  	{0x1709, "Recovered data without ECC - data rewritten"},
  
  	{0x1800, "Recovered data with error correction applied"},
  	{0x1801, "Recovered data with error corr. & retries applied"},
  	{0x1802, "Recovered data - data auto-reallocated"},
  	{0x1803, "Recovered data with CIRC"},
  	{0x1804, "Recovered data with L-EC"},
  	{0x1805, "Recovered data - recommend reassignment"},
  	{0x1806, "Recovered data - recommend rewrite"},
  	{0x1807, "Recovered data with ECC - data rewritten"},
  	{0x1808, "Recovered data with linking"},
  
  	{0x1900, "Defect list error"},
  	{0x1901, "Defect list not available"},
  	{0x1902, "Defect list error in primary list"},
  	{0x1903, "Defect list error in grown list"},
  
  	{0x1A00, "Parameter list length error"},
  
  	{0x1B00, "Synchronous data transfer error"},
  
  	{0x1C00, "Defect list not found"},
  	{0x1C01, "Primary defect list not found"},
  	{0x1C02, "Grown defect list not found"},
  
  	{0x1D00, "Miscompare during verify operation"},

  	{0x1D01, "Miscompare verify of unmapped LBA"},

  
  	{0x1E00, "Recovered id with ECC correction"},
  
  	{0x1F00, "Partial defect list transfer"},
  
  	{0x2000, "Invalid command operation code"},
  	{0x2001, "Access denied - initiator pending-enrolled"},
  	{0x2002, "Access denied - no access rights"},
  	{0x2003, "Access denied - invalid mgmt id key"},
  	{0x2004, "Illegal command while in write capable state"},
  	{0x2005, "Obsolete"},
  	{0x2006, "Illegal command while in explicit address mode"},
  	{0x2007, "Illegal command while in implicit address mode"},
  	{0x2008, "Access denied - enrollment conflict"},
  	{0x2009, "Access denied - invalid LU identifier"},
  	{0x200A, "Access denied - invalid proxy token"},
  	{0x200B, "Access denied - ACL LUN conflict"},
  
  	{0x2100, "Logical block address out of range"},
  	{0x2101, "Invalid element address"},
  	{0x2102, "Invalid address for write"},

  	{0x2103, "Invalid write crossing layer jump"},

  
  	{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
  
  	{0x2400, "Invalid field in cdb"},
  	{0x2401, "CDB decryption error"},

  	{0x2402, "Obsolete"},
  	{0x2403, "Obsolete"},

  	{0x2404, "Security audit value frozen"},
  	{0x2405, "Security working key frozen"},
  	{0x2406, "Nonce not unique"},
  	{0x2407, "Nonce timestamp out of range"},

  	{0x2408, "Invalid XCDB"},

  
  	{0x2500, "Logical unit not supported"},
  
  	{0x2600, "Invalid field in parameter list"},
  	{0x2601, "Parameter not supported"},
  	{0x2602, "Parameter value invalid"},
  	{0x2603, "Threshold parameters not supported"},
  	{0x2604, "Invalid release of persistent reservation"},
  	{0x2605, "Data decryption error"},
  	{0x2606, "Too many target descriptors"},
  	{0x2607, "Unsupported target descriptor type code"},
  	{0x2608, "Too many segment descriptors"},
  	{0x2609, "Unsupported segment descriptor type code"},
  	{0x260A, "Unexpected inexact segment"},
  	{0x260B, "Inline data length exceeded"},
  	{0x260C, "Invalid operation for copy source or destination"},
  	{0x260D, "Copy segment granularity violation"},
  	{0x260E, "Invalid parameter while port is enabled"},

  	{0x260F, "Invalid data-out buffer integrity check value"},
  	{0x2610, "Data decryption key fail limit reached"},
  	{0x2611, "Incomplete key-associated data set"},
  	{0x2612, "Vendor specific key reference not found"},

  
  	{0x2700, "Write protected"},
  	{0x2701, "Hardware write protected"},
  	{0x2702, "Logical unit software write protected"},
  	{0x2703, "Associated write protect"},
  	{0x2704, "Persistent write protect"},
  	{0x2705, "Permanent write protect"},
  	{0x2706, "Conditional write protect"},

  	{0x2707, "Space allocation failed write protect"},

  
  	{0x2800, "Not ready to ready change, medium may have changed"},
  	{0x2801, "Import or export element accessed"},

  	{0x2802, "Format-layer may have changed"},

  	{0x2803, "Import/export element accessed, medium changed"},

  
  	{0x2900, "Power on, reset, or bus device reset occurred"},
  	{0x2901, "Power on occurred"},
  	{0x2902, "Scsi bus reset occurred"},
  	{0x2903, "Bus device reset function occurred"},
  	{0x2904, "Device internal reset"},
  	{0x2905, "Transceiver mode changed to single-ended"},
  	{0x2906, "Transceiver mode changed to lvd"},
  	{0x2907, "I_T nexus loss occurred"},
  
  	{0x2A00, "Parameters changed"},
  	{0x2A01, "Mode parameters changed"},
  	{0x2A02, "Log parameters changed"},
  	{0x2A03, "Reservations preempted"},
  	{0x2A04, "Reservations released"},
  	{0x2A05, "Registrations preempted"},
  	{0x2A06, "Asymmetric access state changed"},
  	{0x2A07, "Implicit asymmetric access state transition failed"},
  	{0x2A08, "Priority changed"},
  	{0x2A09, "Capacity data has changed"},

  	{0x2A0A, "Error history I_T nexus cleared"},
  	{0x2A0B, "Error history snapshot released"},
  	{0x2A0C, "Error recovery attributes have changed"},
  	{0x2A0D, "Data encryption capabilities changed"},

  	{0x2A10, "Timestamp changed"},
  	{0x2A11, "Data encryption parameters changed by another i_t nexus"},
  	{0x2A12, "Data encryption parameters changed by vendor specific "
  		 "event"},
  	{0x2A13, "Data encryption key instance counter has changed"},

  	{0x2A14, "SA creation capabilities data has changed"},

  
  	{0x2B00, "Copy cannot execute since host cannot disconnect"},
  
  	{0x2C00, "Command sequence error"},
  	{0x2C01, "Too many windows specified"},
  	{0x2C02, "Invalid combination of windows specified"},
  	{0x2C03, "Current program area is not empty"},
  	{0x2C04, "Current program area is empty"},
  	{0x2C05, "Illegal power condition request"},
  	{0x2C06, "Persistent prevent conflict"},
  	{0x2C07, "Previous busy status"},
  	{0x2C08, "Previous task set full status"},
  	{0x2C09, "Previous reservation conflict status"},
  	{0x2C0A, "Partition or collection contains user objects"},
  	{0x2C0B, "Not reserved"},
  
  	{0x2D00, "Overwrite error on update in place"},
  
  	{0x2E00, "Insufficient time for operation"},
  
  	{0x2F00, "Commands cleared by another initiator"},

  	{0x2F01, "Commands cleared by power loss notification"},

  	{0x2F02, "Commands cleared by device server"},

  
  	{0x3000, "Incompatible medium installed"},
  	{0x3001, "Cannot read medium - unknown format"},
  	{0x3002, "Cannot read medium - incompatible format"},
  	{0x3003, "Cleaning cartridge installed"},
  	{0x3004, "Cannot write medium - unknown format"},
  	{0x3005, "Cannot write medium - incompatible format"},
  	{0x3006, "Cannot format medium - incompatible medium"},
  	{0x3007, "Cleaning failure"},
  	{0x3008, "Cannot write - application code mismatch"},
  	{0x3009, "Current session not fixated for append"},
  	{0x300A, "Cleaning request rejected"},

  	{0x300C, "WORM medium - overwrite attempted"},
  	{0x300D, "WORM medium - integrity check"},

  	{0x3010, "Medium not formatted"},

  	{0x3011, "Incompatible volume type"},
  	{0x3012, "Incompatible volume qualifier"},

  
  	{0x3100, "Medium format corrupted"},
  	{0x3101, "Format command failed"},
  	{0x3102, "Zoned formatting failed due to spare linking"},
  
  	{0x3200, "No defect spare location available"},
  	{0x3201, "Defect list update failure"},
  
  	{0x3300, "Tape length error"},
  
  	{0x3400, "Enclosure failure"},
  
  	{0x3500, "Enclosure services failure"},
  	{0x3501, "Unsupported enclosure function"},
  	{0x3502, "Enclosure services unavailable"},
  	{0x3503, "Enclosure services transfer failure"},
  	{0x3504, "Enclosure services transfer refused"},
  	{0x3505, "Enclosure services checksum error"},
  
  	{0x3600, "Ribbon, ink, or toner failure"},
  
  	{0x3700, "Rounded parameter"},
  
  	{0x3800, "Event status notification"},
  	{0x3802, "Esn - power management class event"},
  	{0x3804, "Esn - media class event"},
  	{0x3806, "Esn - device busy class event"},

  	{0x3807, "Thin Provisioning soft threshold reached"},

  
  	{0x3900, "Saving parameters not supported"},
  
  	{0x3A00, "Medium not present"},
  	{0x3A01, "Medium not present - tray closed"},
  	{0x3A02, "Medium not present - tray open"},
  	{0x3A03, "Medium not present - loadable"},
  	{0x3A04, "Medium not present - medium auxiliary memory accessible"},
  
  	{0x3B00, "Sequential positioning error"},
  	{0x3B01, "Tape position error at beginning-of-medium"},
  	{0x3B02, "Tape position error at end-of-medium"},
  	{0x3B03, "Tape or electronic vertical forms unit not ready"},
  	{0x3B04, "Slew failure"},
  	{0x3B05, "Paper jam"},
  	{0x3B06, "Failed to sense top-of-form"},
  	{0x3B07, "Failed to sense bottom-of-form"},
  	{0x3B08, "Reposition error"},
  	{0x3B09, "Read past end of medium"},
  	{0x3B0A, "Read past beginning of medium"},
  	{0x3B0B, "Position past end of medium"},
  	{0x3B0C, "Position past beginning of medium"},
  	{0x3B0D, "Medium destination element full"},
  	{0x3B0E, "Medium source element empty"},
  	{0x3B0F, "End of medium reached"},
  	{0x3B11, "Medium magazine not accessible"},
  	{0x3B12, "Medium magazine removed"},
  	{0x3B13, "Medium magazine inserted"},
  	{0x3B14, "Medium magazine locked"},
  	{0x3B15, "Medium magazine unlocked"},
  	{0x3B16, "Mechanical positioning or changer error"},
  	{0x3B17, "Read past end of user object"},

  	{0x3B18, "Element disabled"},
  	{0x3B19, "Element enabled"},
  	{0x3B1A, "Data transfer device removed"},
  	{0x3B1B, "Data transfer device inserted"},

  
  	{0x3D00, "Invalid bits in identify message"},
  
  	{0x3E00, "Logical unit has not self-configured yet"},
  	{0x3E01, "Logical unit failure"},
  	{0x3E02, "Timeout on logical unit"},
  	{0x3E03, "Logical unit failed self-test"},
  	{0x3E04, "Logical unit unable to update self-test log"},
  
  	{0x3F00, "Target operating conditions have changed"},
  	{0x3F01, "Microcode has been changed"},
  	{0x3F02, "Changed operating definition"},
  	{0x3F03, "Inquiry data has changed"},
  	{0x3F04, "Component device attached"},
  	{0x3F05, "Device identifier changed"},
  	{0x3F06, "Redundancy group created or modified"},
  	{0x3F07, "Redundancy group deleted"},
  	{0x3F08, "Spare created or modified"},
  	{0x3F09, "Spare deleted"},
  	{0x3F0A, "Volume set created or modified"},
  	{0x3F0B, "Volume set deleted"},
  	{0x3F0C, "Volume set deassigned"},
  	{0x3F0D, "Volume set reassigned"},
  	{0x3F0E, "Reported luns data has changed"},
  	{0x3F0F, "Echo buffer overwritten"},
  	{0x3F10, "Medium loadable"},
  	{0x3F11, "Medium auxiliary memory accessible"},

  	{0x3F12, "iSCSI IP address added"},
  	{0x3F13, "iSCSI IP address removed"},
  	{0x3F14, "iSCSI IP address changed"},

  /*
   *	{0x40NN, "Ram failure"},
   *	{0x40NN, "Diagnostic failure on component nn"},
   *	{0x41NN, "Data path failure"},
   *	{0x42NN, "Power-on or self-test failure"},
   */
  	{0x4300, "Message error"},
  
  	{0x4400, "Internal target failure"},

  	{0x4471, "ATA device failed set features"},

  
  	{0x4500, "Select or reselect failure"},
  
  	{0x4600, "Unsuccessful soft reset"},
  
  	{0x4700, "Scsi parity error"},
  	{0x4701, "Data phase CRC error detected"},
  	{0x4702, "Scsi parity error detected during st data phase"},

  	{0x4703, "Information unit iuCRC error detected"},

  	{0x4704, "Asynchronous information protection error detected"},
  	{0x4705, "Protocol service CRC error"},

  	{0x4706, "Phy test function in progress"},

  	{0x477f, "Some commands cleared by iSCSI Protocol event"},
  
  	{0x4800, "Initiator detected error message received"},
  
  	{0x4900, "Invalid message error"},
  
  	{0x4A00, "Command phase error"},
  
  	{0x4B00, "Data phase error"},
  	{0x4B01, "Invalid target port transfer tag received"},
  	{0x4B02, "Too much write data"},
  	{0x4B03, "Ack/nak timeout"},
  	{0x4B04, "Nak received"},
  	{0x4B05, "Data offset error"},
  	{0x4B06, "Initiator response timeout"},
  
  	{0x4C00, "Logical unit failed self-configuration"},
  /*
   *	{0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
   */
  	{0x4E00, "Overlapped commands attempted"},
  
  	{0x5000, "Write append error"},
  	{0x5001, "Write append position error"},
  	{0x5002, "Position error related to timing"},
  
  	{0x5100, "Erase failure"},
  	{0x5101, "Erase failure - incomplete erase operation detected"},
  
  	{0x5200, "Cartridge fault"},
  
  	{0x5300, "Media load or eject failed"},
  	{0x5301, "Unload tape failure"},
  	{0x5302, "Medium removal prevented"},

  	{0x5303, "Medium removal prevented by data transfer element"},
  	{0x5304, "Medium thread or unthread failure"},

  
  	{0x5400, "Scsi to host system interface failure"},
  
  	{0x5500, "System resource failure"},
  	{0x5501, "System buffer full"},
  	{0x5502, "Insufficient reservation resources"},
  	{0x5503, "Insufficient resources"},
  	{0x5504, "Insufficient registration resources"},
  	{0x5505, "Insufficient access control resources"},
  	{0x5506, "Auxiliary memory out of space"},
  	{0x5507, "Quota error"},

  	{0x5508, "Maximum number of supplemental decryption keys exceeded"},

  	{0x5509, "Medium auxiliary memory not accessible"},
  	{0x550A, "Data currently unavailable"},

  
  	{0x5700, "Unable to recover table-of-contents"},
  
  	{0x5800, "Generation does not exist"},
  
  	{0x5900, "Updated block read"},
  
  	{0x5A00, "Operator request or state change input"},
  	{0x5A01, "Operator medium removal request"},
  	{0x5A02, "Operator selected write protect"},
  	{0x5A03, "Operator selected write permit"},
  
  	{0x5B00, "Log exception"},
  	{0x5B01, "Threshold condition met"},
  	{0x5B02, "Log counter at maximum"},
  	{0x5B03, "Log list codes exhausted"},
  
  	{0x5C00, "Rpl status change"},
  	{0x5C01, "Spindles synchronized"},
  	{0x5C02, "Spindles not synchronized"},
  
  	{0x5D00, "Failure prediction threshold exceeded"},
  	{0x5D01, "Media failure prediction threshold exceeded"},
  	{0x5D02, "Logical unit failure prediction threshold exceeded"},
  	{0x5D03, "Spare area exhaustion prediction threshold exceeded"},
  	{0x5D10, "Hardware impending failure general hard drive failure"},
  	{0x5D11, "Hardware impending failure drive error rate too high"},
  	{0x5D12, "Hardware impending failure data error rate too high"},
  	{0x5D13, "Hardware impending failure seek error rate too high"},
  	{0x5D14, "Hardware impending failure too many block reassigns"},
  	{0x5D15, "Hardware impending failure access times too high"},
  	{0x5D16, "Hardware impending failure start unit times too high"},
  	{0x5D17, "Hardware impending failure channel parametrics"},
  	{0x5D18, "Hardware impending failure controller detected"},
  	{0x5D19, "Hardware impending failure throughput performance"},
  	{0x5D1A, "Hardware impending failure seek time performance"},
  	{0x5D1B, "Hardware impending failure spin-up retry count"},
  	{0x5D1C, "Hardware impending failure drive calibration retry count"},
  	{0x5D20, "Controller impending failure general hard drive failure"},
  	{0x5D21, "Controller impending failure drive error rate too high"},
  	{0x5D22, "Controller impending failure data error rate too high"},
  	{0x5D23, "Controller impending failure seek error rate too high"},
  	{0x5D24, "Controller impending failure too many block reassigns"},
  	{0x5D25, "Controller impending failure access times too high"},
  	{0x5D26, "Controller impending failure start unit times too high"},
  	{0x5D27, "Controller impending failure channel parametrics"},
  	{0x5D28, "Controller impending failure controller detected"},
  	{0x5D29, "Controller impending failure throughput performance"},
  	{0x5D2A, "Controller impending failure seek time performance"},
  	{0x5D2B, "Controller impending failure spin-up retry count"},
  	{0x5D2C, "Controller impending failure drive calibration retry count"},
  	{0x5D30, "Data channel impending failure general hard drive failure"},
  	{0x5D31, "Data channel impending failure drive error rate too high"},
  	{0x5D32, "Data channel impending failure data error rate too high"},
  	{0x5D33, "Data channel impending failure seek error rate too high"},
  	{0x5D34, "Data channel impending failure too many block reassigns"},
  	{0x5D35, "Data channel impending failure access times too high"},
  	{0x5D36, "Data channel impending failure start unit times too high"},
  	{0x5D37, "Data channel impending failure channel parametrics"},
  	{0x5D38, "Data channel impending failure controller detected"},
  	{0x5D39, "Data channel impending failure throughput performance"},
  	{0x5D3A, "Data channel impending failure seek time performance"},
  	{0x5D3B, "Data channel impending failure spin-up retry count"},
  	{0x5D3C, "Data channel impending failure drive calibration retry "
  	 "count"},
  	{0x5D40, "Servo impending failure general hard drive failure"},
  	{0x5D41, "Servo impending failure drive error rate too high"},
  	{0x5D42, "Servo impending failure data error rate too high"},
  	{0x5D43, "Servo impending failure seek error rate too high"},
  	{0x5D44, "Servo impending failure too many block reassigns"},
  	{0x5D45, "Servo impending failure access times too high"},
  	{0x5D46, "Servo impending failure start unit times too high"},
  	{0x5D47, "Servo impending failure channel parametrics"},
  	{0x5D48, "Servo impending failure controller detected"},
  	{0x5D49, "Servo impending failure throughput performance"},
  	{0x5D4A, "Servo impending failure seek time performance"},
  	{0x5D4B, "Servo impending failure spin-up retry count"},
  	{0x5D4C, "Servo impending failure drive calibration retry count"},
  	{0x5D50, "Spindle impending failure general hard drive failure"},
  	{0x5D51, "Spindle impending failure drive error rate too high"},
  	{0x5D52, "Spindle impending failure data error rate too high"},
  	{0x5D53, "Spindle impending failure seek error rate too high"},
  	{0x5D54, "Spindle impending failure too many block reassigns"},
  	{0x5D55, "Spindle impending failure access times too high"},
  	{0x5D56, "Spindle impending failure start unit times too high"},
  	{0x5D57, "Spindle impending failure channel parametrics"},
  	{0x5D58, "Spindle impending failure controller detected"},
  	{0x5D59, "Spindle impending failure throughput performance"},
  	{0x5D5A, "Spindle impending failure seek time performance"},
  	{0x5D5B, "Spindle impending failure spin-up retry count"},
  	{0x5D5C, "Spindle impending failure drive calibration retry count"},
  	{0x5D60, "Firmware impending failure general hard drive failure"},
  	{0x5D61, "Firmware impending failure drive error rate too high"},
  	{0x5D62, "Firmware impending failure data error rate too high"},
  	{0x5D63, "Firmware impending failure seek error rate too high"},
  	{0x5D64, "Firmware impending failure too many block reassigns"},
  	{0x5D65, "Firmware impending failure access times too high"},
  	{0x5D66, "Firmware impending failure start unit times too high"},
  	{0x5D67, "Firmware impending failure channel parametrics"},
  	{0x5D68, "Firmware impending failure controller detected"},
  	{0x5D69, "Firmware impending failure throughput performance"},
  	{0x5D6A, "Firmware impending failure seek time performance"},
  	{0x5D6B, "Firmware impending failure spin-up retry count"},
  	{0x5D6C, "Firmware impending failure drive calibration retry count"},
  	{0x5DFF, "Failure prediction threshold exceeded (false)"},
  
  	{0x5E00, "Low power condition on"},
  	{0x5E01, "Idle condition activated by timer"},
  	{0x5E02, "Standby condition activated by timer"},
  	{0x5E03, "Idle condition activated by command"},
  	{0x5E04, "Standby condition activated by command"},

  	{0x5E05, "Idle_b condition activated by timer"},
  	{0x5E06, "Idle_b condition activated by command"},
  	{0x5E07, "Idle_c condition activated by timer"},
  	{0x5E08, "Idle_c condition activated by command"},
  	{0x5E09, "Standby_y condition activated by timer"},
  	{0x5E0A, "Standby_y condition activated by command"},

  	{0x5E41, "Power state change to active"},
  	{0x5E42, "Power state change to idle"},
  	{0x5E43, "Power state change to standby"},
  	{0x5E45, "Power state change to sleep"},
  	{0x5E47, "Power state change to device control"},
  
  	{0x6000, "Lamp failure"},
  
  	{0x6100, "Video acquisition error"},
  	{0x6101, "Unable to acquire video"},
  	{0x6102, "Out of focus"},
  
  	{0x6200, "Scan head positioning error"},
  
  	{0x6300, "End of user area encountered on this track"},
  	{0x6301, "Packet does not fit in available space"},
  
  	{0x6400, "Illegal mode for this track"},
  	{0x6401, "Invalid packet size"},
  
  	{0x6500, "Voltage fault"},
  
  	{0x6600, "Automatic document feeder cover up"},
  	{0x6601, "Automatic document feeder lift up"},
  	{0x6602, "Document jam in automatic document feeder"},
  	{0x6603, "Document miss feed automatic in document feeder"},
  
  	{0x6700, "Configuration failure"},
  	{0x6701, "Configuration of incapable logical units failed"},
  	{0x6702, "Add logical unit failed"},
  	{0x6703, "Modification of logical unit failed"},
  	{0x6704, "Exchange of logical unit failed"},
  	{0x6705, "Remove of logical unit failed"},
  	{0x6706, "Attachment of logical unit failed"},
  	{0x6707, "Creation of logical unit failed"},
  	{0x6708, "Assign failure occurred"},
  	{0x6709, "Multiply assigned logical unit"},
  	{0x670A, "Set target port groups command failed"},

  	{0x670B, "ATA device feature not enabled"},

  
  	{0x6800, "Logical unit not configured"},
  
  	{0x6900, "Data loss on logical unit"},
  	{0x6901, "Multiple logical unit failures"},
  	{0x6902, "Parity/data mismatch"},
  
  	{0x6A00, "Informational, refer to log"},
  
  	{0x6B00, "State change has occurred"},
  	{0x6B01, "Redundancy level got better"},
  	{0x6B02, "Redundancy level got worse"},
  
  	{0x6C00, "Rebuild failure occurred"},
  
  	{0x6D00, "Recalculate failure occurred"},
  
  	{0x6E00, "Command to logical unit failed"},
  
  	{0x6F00, "Copy protection key exchange failure - authentication "
  	 "failure"},
  	{0x6F01, "Copy protection key exchange failure - key not present"},
  	{0x6F02, "Copy protection key exchange failure - key not established"},
  	{0x6F03, "Read of scrambled sector without authentication"},
  	{0x6F04, "Media region code is mismatched to logical unit region"},
  	{0x6F05, "Drive region must be permanent/region reset count error"},

  	{0x6F06, "Insufficient block count for binding nonce recording"},
  	{0x6F07, "Conflict in binding nonce recording"},

  /*
   *	{0x70NN, "Decompression exception short algorithm id of nn"},
   */
  	{0x7100, "Decompression exception long algorithm id"},
  
  	{0x7200, "Session fixation error"},
  	{0x7201, "Session fixation error writing lead-in"},
  	{0x7202, "Session fixation error writing lead-out"},
  	{0x7203, "Session fixation error - incomplete track in session"},
  	{0x7204, "Empty or partially written reserved track"},
  	{0x7205, "No more track reservations allowed"},

  	{0x7206, "RMZ extension is not allowed"},
  	{0x7207, "No more test zone extensions are allowed"},

  
  	{0x7300, "Cd control error"},
  	{0x7301, "Power calibration area almost full"},
  	{0x7302, "Power calibration area is full"},
  	{0x7303, "Power calibration area error"},
  	{0x7304, "Program memory area update failure"},
  	{0x7305, "Program memory area is full"},
  	{0x7306, "RMA/PMA is almost full"},

  	{0x7310, "Current power calibration area almost full"},
  	{0x7311, "Current power calibration area is full"},
  	{0x7317, "RDZ is full"},
  
  	{0x7400, "Security error"},
  	{0x7401, "Unable to decrypt data"},
  	{0x7402, "Unencrypted data encountered while decrypting"},
  	{0x7403, "Incorrect data encryption key"},
  	{0x7404, "Cryptographic integrity validation failed"},
  	{0x7405, "Error decrypting data"},

  	{0x7406, "Unknown signature verification key"},
  	{0x7407, "Encryption parameters not useable"},
  	{0x7408, "Digital signature validation failure"},
  	{0x7409, "Encryption mode mismatch on read"},
  	{0x740A, "Encrypted block not raw read enabled"},
  	{0x740B, "Incorrect Encryption parameters"},
  	{0x740C, "Unable to decrypt parameter list"},
  	{0x740D, "Encryption algorithm disabled"},
  	{0x7410, "SA creation parameter value invalid"},
  	{0x7411, "SA creation parameter value rejected"},
  	{0x7412, "Invalid SA usage"},
  	{0x7421, "Data Encryption configuration prevented"},
  	{0x7430, "SA creation parameter not supported"},
  	{0x7440, "Authentication failed"},
  	{0x7461, "External data encryption key manager access error"},
  	{0x7462, "External data encryption key manager error"},
  	{0x7463, "External data encryption key not found"},
  	{0x7464, "External data encryption request not authorized"},
  	{0x746E, "External data encryption control timeout"},
  	{0x746F, "External data encryption control error"},

  	{0x7471, "Logical unit access not authorized"},

  	{0x7479, "Security conflict in translated device"},

  	{0, NULL}
  };
  
  struct error_info2 {
  	unsigned char code1, code2_min, code2_max;
  	const char * fmt;
  };

  static const struct error_info2 additional2[] =

  {

  	{0x40, 0x00, 0x7f, "Ram failure (%x)"},
  	{0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"},
  	{0x41, 0x00, 0xff, "Data path failure (%x)"},
  	{0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"},
  	{0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"},
  	{0x70, 0x00, 0xff, "Decompression exception short algorithm id of %x"},

  	{0, 0, 0, NULL}
  };
  
  /* description of the sense key values */

  static const char * const snstext[] = {

  	"No Sense",	    /* 0: There is no sense information */
  	"Recovered Error",  /* 1: The last command completed successfully
  				  but used error correction */
  	"Not Ready",	    /* 2: The addressed target is not ready */
  	"Medium Error",	    /* 3: Data error detected on the medium */
  	"Hardware Error",   /* 4: Controller or device failure */
  	"Illegal Request",  /* 5: Error in request */
  	"Unit Attention",   /* 6: Removable medium was changed, or
  				  the target has been reset, or ... */
  	"Data Protect",	    /* 7: Access to the data is blocked */
  	"Blank Check",	    /* 8: Reached unexpected written or unwritten
  				  region of the medium */
  	"Vendor Specific(9)",
  	"Copy Aborted",	    /* A: COPY or COMPARE was aborted */
  	"Aborted Command",  /* B: The target aborted the command */
  	"Equal",	    /* C: A SEARCH DATA command found data equal */
  	"Volume Overflow",  /* D: Medium full with still data to be written */
  	"Miscompare",	    /* E: Source data and data on the medium
  				  do not agree */
  };
  #endif
  
  /* Get sense key string or NULL if not available */
  const char *
  scsi_sense_key_string(unsigned char key) {
  #ifdef CONFIG_SCSI_CONSTANTS
  	if (key <= 0xE)
  		return snstext[key];
  #endif
  	return NULL;
  }
  EXPORT_SYMBOL(scsi_sense_key_string);
  
  /*
   * Get additional sense code string or NULL if not available.
   * This string may contain a "%x" and should be printed with ascq as arg.
   */
  const char *
  scsi_extd_sense_format(unsigned char asc, unsigned char ascq) {
  #ifdef CONFIG_SCSI_CONSTANTS
  	int i;
  	unsigned short code = ((asc << 8) | ascq);

  	for (i = 0; additional[i].text; i++)

  		if (additional[i].code12 == code)
  			return additional[i].text;

  	for (i = 0; additional2[i].fmt; i++) {

  		if (additional2[i].code1 == asc &&

  		    ascq >= additional2[i].code2_min &&
  		    ascq <= additional2[i].code2_max)

  			return additional2[i].fmt;

  	}

  #endif
  	return NULL;
  }
  EXPORT_SYMBOL(scsi_extd_sense_format);

  void

  scsi_show_extd_sense(unsigned char asc, unsigned char ascq)
  {

          const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);

  
  	if (extd_sense_fmt) {
  		if (strstr(extd_sense_fmt, "%x")) {

  			printk("Add. Sense: ");

  			printk(extd_sense_fmt, ascq);
  		} else

  			printk("Add. Sense: %s", extd_sense_fmt);

  	} else {
  		if (asc >= 0x80)

  			printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc,
  			       ascq);

  		if (ascq >= 0x80)

  			printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc,
  			       ascq);

  		else
  			printk("ASC=0x%x ASCQ=0x%x", asc, ascq);
  	}

  
  	printk("
  ");

  }

  EXPORT_SYMBOL(scsi_show_extd_sense);

  void

  scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr)

  {
  	const char *sense_txt;

  
  	sense_txt = scsi_sense_key_string(sshdr->sense_key);
  	if (sense_txt)

  		printk("Sense Key : %s ", sense_txt);

  	else

  		printk("Sense Key : 0x%x ", sshdr->sense_key);
  
  	printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " :
  	       "[current] ");
  
  	if (sshdr->response_code >= 0x72)
  		printk("[descriptor]");

  	printk("
  ");
  }

  EXPORT_SYMBOL(scsi_show_sense_hdr);
  
  /*
   * Print normalized SCSI sense header with a prefix.
   */
  void
  scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
  {
  	printk(KERN_INFO "%s: ", name);
  	scsi_show_sense_hdr(sshdr);
  	printk(KERN_INFO "%s: ", name);
  	scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
  }

  EXPORT_SYMBOL(scsi_print_sense_hdr);

  /*
   * Print normalized SCSI sense header with device information and a prefix.
   */
  void
  scsi_cmd_print_sense_hdr(struct scsi_cmnd *scmd, const char *desc,
  			  struct scsi_sense_hdr *sshdr)
  {
  	scmd_printk(KERN_INFO, scmd, "%s: ", desc);
  	scsi_show_sense_hdr(sshdr);
  	scmd_printk(KERN_INFO, scmd, "%s: ", desc);
  	scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
  }
  EXPORT_SYMBOL(scsi_cmd_print_sense_hdr);

  static void

  scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len,
  		       struct scsi_sense_hdr *sshdr)

  {
  	int k, num, res;

  	res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);

  	if (0 == res) {
  		/* this may be SCSI-1 sense data */
  		num = (sense_len < 32) ? sense_len : 32;

  		printk("Unrecognized sense data (in hex):");

  		for (k = 0; k < num; ++k) {
  			if (0 == (k % 16)) {
  				printk("
  ");
  				printk(KERN_INFO "        ");
  			}
  			printk("%02x ", sense_buffer[k]);
  		}
  		printk("
  ");
  		return;
  	}

  }

  static void

  scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len,
  			 struct scsi_sense_hdr *sshdr)
  {
  	int k, num, res;
  
  	if (sshdr->response_code < 0x72)
  	{

  		/* only decode extras for "fixed" format now */
  		char buff[80];
  		int blen, fixed_valid;

  		unsigned int info;

  
  		fixed_valid = sense_buffer[0] & 0x80;
  		info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) |
  			(sense_buffer[5] << 8) | sense_buffer[6]);
  		res = 0;
  		memset(buff, 0, sizeof(buff));
  		blen = sizeof(buff) - 1;
  		if (fixed_valid)
  			res += snprintf(buff + res, blen - res,
  					"Info fld=0x%x", info);
  		if (sense_buffer[2] & 0x80) {
  			/* current command has read a filemark */
  			if (res > 0)
  				res += snprintf(buff + res, blen - res, ", ");
  			res += snprintf(buff + res, blen - res, "FMK");
  		}
  		if (sense_buffer[2] & 0x40) {
  			/* end-of-medium condition exists */
  			if (res > 0)
  				res += snprintf(buff + res, blen - res, ", ");
  			res += snprintf(buff + res, blen - res, "EOM");
  		}
  		if (sense_buffer[2] & 0x20) {
  			/* incorrect block length requested */
  			if (res > 0)
  				res += snprintf(buff + res, blen - res, ", ");
  			res += snprintf(buff + res, blen - res, "ILI");
  		}
  		if (res > 0)

  			printk("%s
  ", buff);
  	} else if (sshdr->additional_length > 0) {

  		/* descriptor format with sense descriptors */

  		num = 8 + sshdr->additional_length;

  		num = (sense_len < num) ? sense_len : num;

  		printk("Descriptor sense data with sense descriptors "
  		       "(in hex):");

  		for (k = 0; k < num; ++k) {
  			if (0 == (k % 16)) {
  				printk("
  ");
  				printk(KERN_INFO "        ");
  			}
  			printk("%02x ", sense_buffer[k]);
  		}

  		printk("
  ");
  	}

  }

  /* Normalize and print sense buffer with name prefix */
  void __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
  			int sense_len)

  {

  	struct scsi_sense_hdr sshdr;
  
  	printk(KERN_INFO "%s: ", name);
  	scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr);
  	scsi_show_sense_hdr(&sshdr);
  	scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr);
  	printk(KERN_INFO "%s: ", name);
  	scsi_show_extd_sense(sshdr.asc, sshdr.ascq);

  }

  EXPORT_SYMBOL(__scsi_print_sense);

  /* Normalize and print sense buffer in SCSI command */
  void scsi_print_sense(char *name, struct scsi_cmnd *cmd)

  {

  	struct scsi_sense_hdr sshdr;

  	scmd_printk(KERN_INFO, cmd, " ");

  	scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
  				 &sshdr);
  	scsi_show_sense_hdr(&sshdr);
  	scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
  				 &sshdr);

  	scmd_printk(KERN_INFO, cmd, " ");

  	scsi_show_extd_sense(sshdr.asc, sshdr.ascq);

  }

  EXPORT_SYMBOL(scsi_print_sense);

  
  #ifdef CONFIG_SCSI_CONSTANTS

  static const char * const hostbyte_table[]={

  "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",

  "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",

  "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
  "DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST" };

  #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table)

  static const char * const driverbyte_table[]={

  "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT",  "DRIVER_MEDIA", "DRIVER_ERROR",

  "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};

  #define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table)

  void scsi_show_result(int result)

  {

  	int hb = host_byte(result);

  	int db = driver_byte(result);

  	printk("Result: hostbyte=%s driverbyte=%s
  ",

  	       (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb]     : "invalid"),

  	       (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"));

  }

  #else

  
  void scsi_show_result(int result)

  {

  	printk("Result: hostbyte=0x%02x driverbyte=0x%02x
  ",
  	       host_byte(result), driver_byte(result));

  }

  #endif

  EXPORT_SYMBOL(scsi_show_result);
  
  
  void scsi_print_result(struct scsi_cmnd *cmd)
  {

  	scmd_printk(KERN_INFO, cmd, " ");

  	scsi_show_result(cmd->result);
  }
  EXPORT_SYMBOL(scsi_print_result);