Blame view
drivers/misc/Kconfig
17.7 KB
1da177e4c Linux-2.6.12-rc2 |
1 2 3 |
# # Misc strange devices # |
ff606677f Move lis3lv02d dr... |
4 5 6 7 8 9 10 |
# This one has to live outside of the MISC_DEVICES conditional, # because it may be selected by drivers/platform/x86/hp_accel. config SENSORS_LIS3LV02D tristate depends on INPUT select INPUT_POLLDEV default n |
7bf1fc432 kconfig: no STRAN... |
11 |
menuconfig MISC_DEVICES |
376df37a5 Use menuconfig ob... |
12 |
bool "Misc devices" |
06bfb7eb1 Add some help tex... |
13 14 15 16 17 |
---help--- Say Y here to get to see options for device drivers from various different categories. This option alone does not add any kernel code. If you say N, all options in this submenu will be skipped and disabled. |
376df37a5 Use menuconfig ob... |
18 |
|
7bf1fc432 kconfig: no STRAN... |
19 |
if MISC_DEVICES |
1da177e4c Linux-2.6.12-rc2 |
20 |
|
4eb174bee ad525x_dpot: new ... |
21 |
config AD525X_DPOT |
6c536e4ce ad525x_dpot: add ... |
22 23 |
tristate "Analog Devices Digital Potentiometers" depends on (I2C || SPI) && SYSFS |
4eb174bee ad525x_dpot: new ... |
24 25 |
help If you say yes here, you get support for the Analog Devices |
6c536e4ce ad525x_dpot: add ... |
26 27 28 29 |
AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, |
e3ae68476 ad525x_dpot: add ... |
30 |
AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, |
c74cba610 ad525x_dpot: add ... |
31 |
AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, |
a4bd39495 drivers/misc/ad52... |
32 33 |
ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, AD5271, AD5272, AD5274 |
4eb174bee ad525x_dpot: new ... |
34 35 36 37 38 39 40 |
digital potentiometer chips. See Documentation/misc-devices/ad525x_dpot.txt for the userspace interface. This driver can also be built as a module. If so, the module will be called ad525x_dpot. |
6c536e4ce ad525x_dpot: add ... |
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 |
config AD525X_DPOT_I2C tristate "support I2C bus connection" depends on AD525X_DPOT && I2C help Say Y here if you have a digital potentiometers hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called ad525x_dpot-i2c. config AD525X_DPOT_SPI tristate "support SPI bus connection" depends on AD525X_DPOT && SPI_MASTER help Say Y here if you have a digital potentiometers hooked to an SPI bus. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ad525x_dpot-spi. |
9a1e8eb1f Basic PWM driver ... |
60 61 |
config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" |
2d60cd15d ARM: at91: remove... |
62 |
depends on HAVE_CLK |
9a1e8eb1f Basic PWM driver ... |
63 64 |
help This option enables device driver support for the PWM channels |
692105b8a trivial: fix typo... |
65 66 |
on certain Atmel processors. Pulse Width Modulation is used for purposes including software controlled power-efficient backlights |
9a1e8eb1f Basic PWM driver ... |
67 |
on LCD displays, motor control, and waveform generation. |
f0f05b1c7 misc: Add ab8500 ... |
68 69 |
config AB8500_PWM bool "AB8500 PWM support" |
b14375800 misc: Make AB8500... |
70 |
depends on AB8500_CORE && ARCH_U8500 |
f0f05b1c7 misc: Add ab8500 ... |
71 72 73 74 75 |
select HAVE_PWM help This driver exports functions to enable/disble/config/free Pulse Width Modulation in the Analog Baseband Chip AB8500. It is used by led and backlight driver to control the intensity. |
2a341f5cf atmel_tc library |
76 77 78 79 80 81 82 |
config ATMEL_TCLIB bool "Atmel AT32/AT91 Timer/Counter Library" depends on (AVR32 || ARCH_AT91) help Select this if you want a library to allocate the Timer/Counter blocks found on many Atmel processors. This facilitates using these blocks by different drivers despite processor differences. |
4d243f92e atmel_tc clocksou... |
83 84 |
config ATMEL_TCB_CLKSRC bool "TC Block Clocksource" |
592913ecb time: Kill off CO... |
85 |
depends on ATMEL_TCLIB |
4d243f92e atmel_tc clocksou... |
86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 |
default y help Select this to get a high precision clocksource based on a TC block with a 5+ MHz base clock rate. Two timer channels are combined to make a single 32-bit timer. When GENERIC_CLOCKEVENTS is defined, the third timer channel may be used as a clock event device supporting oneshot mode (delays of up to two seconds) based on the 32 KiHz clock. config ATMEL_TCB_CLKSRC_BLOCK int depends on ATMEL_TCB_CLKSRC prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X default 0 range 0 1 help Some chips provide more than one TC block, so you have the choice of which one to use for the clock framework. The other TC can be used for other purposes, such as PWM generation and interval timing. |
1da177e4c Linux-2.6.12-rc2 |
107 108 |
config IBM_ASM tristate "Device driver for IBM RSA service processor" |
ff294cba8 IBMASM: must depe... |
109 |
depends on X86 && PCI && INPUT && EXPERIMENTAL |
1da177e4c Linux-2.6.12-rc2 |
110 111 112 113 114 115 116 117 118 119 120 |
---help--- This option enables device driver support for in-band access to the IBM RSA (Condor) service processor in eServer xSeries systems. The ibmasm device driver allows user space application to access ASM (Advanced Systems Management) functions on the service processor. The driver is meant to be used in conjunction with a user space API. The ibmasm driver also enables the OS to use the UART on the service processor board as a regular serial port. To make use of this feature serial driver support (CONFIG_SERIAL_8250) must be enabled. |
f95651299 [PATCH] mmc: driv... |
121 |
|
1da177e4c Linux-2.6.12-rc2 |
122 123 |
WARNING: This software may not be supported or function correctly on your IBM server. Please consult the IBM ServerProven |
631dd1a88 Update broken web... |
124 125 |
website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> for information on the specific driver level and support statement |
1da177e4c Linux-2.6.12-rc2 |
126 |
for your IBM server. |
cef2cf072 Misc: add sensabl... |
127 |
config PHANTOM |
ec905a186 drivers/misc/phan... |
128 |
tristate "Sensable PHANToM (PCI)" |
cef2cf072 Misc: add sensabl... |
129 130 131 |
depends on PCI help Say Y here if you want to build a driver for Sensable PHANToM device. |
ec905a186 drivers/misc/phan... |
132 |
This driver is only for PCI PHANToMs. |
cef2cf072 Misc: add sensabl... |
133 134 |
If you choose to build module, its name will be phantom. If unsure, say N here. |
0b61d2acb Intel PTI impleme... |
135 136 |
config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" |
8ea95e087 pti: add missing ... |
137 |
depends on PCI |
0b61d2acb Intel PTI impleme... |
138 139 140 141 142 143 144 145 146 147 |
default n help The PTI (Parallel Trace Interface) driver directs trace data routed from various parts in the system out through an Intel Penwell PTI port and out of the mobile device for analysis with a debugging tool (Lauterbach or Fido). You should select this driver if the target kernel is meant for an Intel Atom (non-netbook) mobile device containing a MIPI P1149.7 standard implementation. |
59f148005 [PATCH] ioc4: Ena... |
148 149 |
config SGI_IOC4 tristate "SGI IOC4 Base IO support" |
aa6c2e62b [PATCH] IOC4 shou... |
150 |
depends on PCI |
59f148005 [PATCH] ioc4: Ena... |
151 152 153 154 155 156 157 158 |
---help--- This option enables basic support for the IOC4 chip on certain SGI IO controller cards (IO9, IO10, and PCI-RT). This option does not enable any specific functions on such a card, but provides necessary infrastructure for other drivers to utilize. If you have an SGI Altix with an IOC4-based card say Y. Otherwise say N. |
f95651299 [PATCH] mmc: driv... |
159 160 |
config TIFM_CORE tristate "TI Flash Media interface support (EXPERIMENTAL)" |
9f3bed5fd [PATCH] TIFM shou... |
161 |
depends on EXPERIMENTAL && PCI |
f95651299 [PATCH] mmc: driv... |
162 163 164 165 166 167 168 169 170 |
help If you want support for Texas Instruments(R) Flash Media adapters you should select this option and then also choose an appropriate host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter support', if you have a TI PCI74xx compatible card reader, for example. You will also have to select some flash card format drivers. MMC/SD cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD Interface support (MMC_TIFM_SD)'. |
8c36790a2 drivers/misc/Make... |
171 |
To compile this driver as a module, choose M here: the module will |
f95651299 [PATCH] mmc: driv... |
172 |
be called tifm_core. |
1da177e4c Linux-2.6.12-rc2 |
173 |
|
f95651299 [PATCH] mmc: driv... |
174 175 176 177 178 179 180 181 182 |
config TIFM_7XX1 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" depends on PCI && TIFM_CORE && EXPERIMENTAL default TIFM_CORE help This option enables support for Texas Instruments(R) PCI74xx and PCI76xx families of Flash Media adapters, found in many laptops. To make actual use of the device, you will have to select some flash card format drivers, as outlined in the TIFM_CORE Help. |
8c36790a2 drivers/misc/Make... |
183 |
To compile this driver as a module, choose M here: the module will |
f95651299 [PATCH] mmc: driv... |
184 |
be called tifm_7xx1. |
a412ae3fb ics932s401: new c... |
185 186 187 188 189 190 191 192 193 |
config ICS932S401 tristate "Integrated Circuits ICS932S401" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Integrated Circuits ICS932S401 clock control chips. This driver can also be built as a module. If so, the module will be called ics932s401. |
eb1f29306 Driver for the At... |
194 195 196 197 |
config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" depends on AVR32 || ARCH_AT91 ---help--- |
692105b8a trivial: fix typo... |
198 |
This option enables device driver support for Atmel Synchronized |
eb1f29306 Driver for the At... |
199 200 201 202 203 204 |
Serial Communication peripheral (SSC). The SSC peripheral supports a wide variety of serial frame based communications, i.e. I2S, SPI, etc. If unsure, say N. |
d569d5bb3 [SCSI] enclosure:... |
205 206 207 208 209 210 211 212 |
config ENCLOSURE_SERVICES tristate "Enclosure Services" default n help Provides support for intelligent enclosures (bays which contain storage devices). You also need either a host driver (SCSI/ATA) which supports enclosures or a SCSI enclosure device (SES) to use these services. |
45d9ca492 [IA64] move XP an... |
213 214 |
config SGI_XP tristate "Support communication between SGI SSIs" |
3b0de7b36 add dependency of... |
215 |
depends on NET |
03b486322 x86: make UV supp... |
216 |
depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP |
45d9ca492 [IA64] move XP an... |
217 218 |
select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 |
1bc4faa59 sgi-gru: remove S... |
219 |
select SGI_GRU if X86_64 && SMP |
45d9ca492 [IA64] move XP an... |
220 221 222 223 224 225 |
---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have hardware based memory protection from the others. Enabling this feature will allow for direct communication between SSIs based on a network adapter and DMA messaging. |
82dca611b cs5535: add a gen... |
226 227 |
config CS5535_MFGPT tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" |
703f03c89 geode: reflect mf... |
228 |
depends on PCI && X86 && MFD_CS5535 |
82dca611b cs5535: add a gen... |
229 230 231 232 233 234 235 236 237 238 239 240 |
default n help This driver provides access to MFGPT functionality for other drivers that need timers. MFGPTs are available in the CS5535 and CS5536 companion chips that are found in AMD Geode and several other platforms. They have a better resolution and max interval than the generic PIT, and are suitable for use as high-res timers. You probably don't want to enable this manually; other drivers that make use of it should enable it. config CS5535_MFGPT_DEFAULT_IRQ int |
2bf212b9e cs5535: CS5535_MF... |
241 |
depends on CS5535_MFGPT |
82dca611b cs5535: add a gen... |
242 243 244 245 246 247 248 |
default 7 help MFGPTs on the CS5535 require an interrupt. The selected IRQ can be overridden as a module option as well as by driver that use the cs5535_mfgpt_ API; however, different architectures might want to use a different IRQ by default. This is here for architectures to set as necessary. |
9c8f05c28 MFGPT: move clock... |
249 250 |
config CS5535_CLOCK_EVENT_SRC tristate "CS5535/CS5536 high-res timer (MFGPT) events" |
592913ecb time: Kill off CO... |
251 |
depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT |
9c8f05c28 MFGPT: move clock... |
252 253 254 255 256 |
help This driver provides a clock event source based on the MFGPT timer(s) in the CS5535 and CS5536 companion chips. MFGPTs have a better resolution and max interval than the generic PIT, and are suitable for use as high-res timers. |
89bcb05d9 HP iLO driver |
257 |
config HP_ILO |
1ce873abe hpilo: Despecific... |
258 |
tristate "Channel interface driver for the HP iLO processor" |
f38954c93 drivers/misc/hpil... |
259 |
depends on PCI |
89bcb05d9 HP iLO driver |
260 261 262 |
default n help The channel interface driver allows applications to communicate |
1ce873abe hpilo: Despecific... |
263 264 265 266 |
with iLO management processors present on HP ProLiant servers. Upon loading, the driver creates /dev/hpilo/dXccbN files, which can be used to gather data from the management processor, via read and write system calls. |
89bcb05d9 HP iLO driver |
267 268 269 |
To compile this driver as a module, choose M here: the module will be called hpilo. |
3d919e5f6 GRU Driver: drive... |
270 271 |
config SGI_GRU tristate "SGI GRU driver" |
1bc4faa59 sgi-gru: remove S... |
272 |
depends on X86_UV && SMP |
3d919e5f6 GRU Driver: drive... |
273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 |
default n select MMU_NOTIFIER ---help--- The GRU is a hardware resource located in the system chipset. The GRU contains memory that can be mmapped into the user address space. This memory is used to communicate with the GRU to perform functions such as load/store, scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user instructions using user virtual addresses. GRU instructions (ex., bcopy) use user virtual addresses for operands. If you are not running on a SGI UV system, say N. config SGI_GRU_DEBUG bool "SGI GRU driver debug" depends on SGI_GRU default n ---help--- This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. |
22d96aa59 drivers/misc/apds... |
292 293 294 295 296 297 298 299 300 |
config APDS9802ALS tristate "Medfield Avago APDS9802 ALS Sensor module" depends on I2C help If you say yes here you get support for the ALS APDS9802 ambient light sensor. This driver can also be built as a module. If so, the module will be called apds9802als. |
3cdbbeebb drivers/misc/isl2... |
301 302 303 304 305 306 307 308 309 |
config ISL29003 tristate "Intersil ISL29003 ambient light sensor" depends on I2C && SYSFS help If you say yes here you get support for the Intersil ISL29003 ambient light sensor. This driver can also be built as a module. If so, the module will be called isl29003. |
2e85c4ddd drivers/misc/isl2... |
310 311 312 313 314 315 316 317 318 |
config ISL29020 tristate "Intersil ISL29020 ambient light sensor" depends on I2C help If you say yes here you get support for the Intersil ISL29020 ambient light sensor. This driver can also be built as a module. If so, the module will be called isl29020. |
6a9bcced5 tsl2550: Move fro... |
319 320 321 322 323 324 325 326 327 |
config SENSORS_TSL2550 tristate "Taos TSL2550 ambient light sensor" depends on I2C && SYSFS help If you say yes here you get support for the Taos TSL2550 ambient light sensor. This driver can also be built as a module. If so, the module will be called tsl2550. |
7efe15f2a drivers/misc: ROH... |
328 329 330 331 332 333 334 335 336 |
config SENSORS_BH1780 tristate "ROHM BH1780GLI ambient light sensor" depends on I2C && SYSFS help If you say yes here you get support for the ROHM BH1780GLI ambient light sensor. This driver can also be built as a module. If so, the module will be called bh1780gli. |
190420ab3 drivers/misc: dri... |
337 338 339 340 341 342 343 344 345 |
config SENSORS_BH1770 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" depends on I2C ---help--- Say Y here if you want to build a driver for BH1770GLC (ROHM) or SFH7770 (Osram) combined ambient light and proximity sensor chip. To compile this driver as a module, choose M here: the module will be called bh1770glc. If unsure, say N here. |
92b1f84d4 drivers/misc: dri... |
346 347 348 349 350 351 352 353 354 355 |
config SENSORS_APDS990X tristate "APDS990X combined als and proximity sensors" depends on I2C default n ---help--- Say Y here if you want to build a driver for Avago APDS990x combined ambient light and proximity sensor chip. To compile this driver as a module, choose M here: the module will be called apds990x. If unsure, say N here. |
cfa3b24c3 hmc6352: add driv... |
356 357 358 359 360 361 |
config HMC6352 tristate "Honeywell HMC6352 compass" depends on I2C help This driver provides support for the Honeywell HMC6352 compass, providing configuration and heading data via sysfs. |
ef12379f2 ARM: 5628/1: ep93... |
362 363 364 365 366 367 368 369 370 371 372 373 |
config EP93XX_PWM tristate "EP93xx PWM support" depends on ARCH_EP93XX help This option enables device driver support for the PWM channels on the Cirrus EP93xx processors. The EP9307 chip only has one PWM channel all the others have two, the second channel is an alternate function of the EGPIO14 pin. A sysfs interface is provided to control the PWM channels. To compile this driver as a module, choose M here: the module will be called ep93xx_pwm. |
dddc66ffa i2c/chips: Move d... |
374 375 376 377 378 379 380 381 382 |
config DS1682 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Dallas Semiconductor DS1682 Total Elapsed Time Recorder. This driver can also be built as a module. If so, the module will be called ds1682. |
b9500546d ST SPEAr: PCIE ga... |
383 384 385 386 387 388 389 390 391 |
config SPEAR13XX_PCIE_GADGET bool "PCIe gadget support for SPEAr13XX platform" depends on ARCH_SPEAR13XX default n help This option enables gadget support for PCIe controller. If board file defines any controller as PCIe endpoint then a sysfs entry will be created for that controller. User can use these sysfs node to configure PCIe EP as per his requirements. |
4d00928c1 drivers/misc: add... |
392 393 394 395 396 397 398 399 |
config TI_DAC7512 tristate "Texas Instruments DAC7512" depends on SPI && SYSFS help If you say yes here you get support for the Texas Instruments DAC7512 16-bit digital-to-analog converter. This driver can also be built as a module. If so, the module |
149d730fa spelling fix in d... |
400 |
will be called ti_dac7512. |
4d00928c1 drivers/misc: add... |
401 |
|
453dc6593 VMware Balloon dr... |
402 403 404 405 406 407 408 409 410 411 412 413 414 415 |
config VMWARE_BALLOON tristate "VMware Balloon Driver" depends on X86 help This is VMware physical memory management driver which acts like a "balloon" that can be inflated to reclaim physical pages by reserving them in the guest and invalidating them in the monitor, freeing up the underlying machine pages so they can be allocated to other guests. The balloon can also be deflated to allow the guest to use more physical memory. If unsure, say N. To compile this driver as a module, choose M here: the |
d544b7a40 vmware balloon: r... |
416 |
module will be called vmw_balloon. |
453dc6593 VMware Balloon dr... |
417 |
|
ce8962455 ARM: 6214/2: driv... |
418 419 420 421 422 423 424 425 426 |
config ARM_CHARLCD bool "ARM Ltd. Character LCD Driver" depends on PLAT_VERSATILE help This is a driver for the character LCD found on the ARM Ltd. Versatile and RealView Platform Baseboards. It doesn't do very much more than display the text "ARM Linux" on the first line and the Linux version on the second line, but that's still useful. |
5bf1d290b drivers/misc: sup... |
427 428 429 430 431 |
config BMP085 tristate "BMP085 digital pressure sensor" depends on I2C && SYSFS help If you say yes here you get support for the Bosch Sensortec |
d8b187c6b Fix typo in Kconf... |
432 |
BMP085 digital pressure sensor. |
5bf1d290b drivers/misc: sup... |
433 434 435 |
To compile this driver as a module, choose M here: the module will be called bmp085. |
cf4ece534 add Packet hub dr... |
436 |
config PCH_PHUB |
584ad00ce pch_phub: Support... |
437 |
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" |
cf4ece534 add Packet hub dr... |
438 439 440 441 442 443 |
depends on PCI help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded processor. The Topcliff has MAC address and Option ROM data in SROM. This driver can access MAC address and Option ROM data in SROM. |
584ad00ce pch_phub: Support... |
444 445 446 447 448 449 450 |
This driver also can be used for LAPIS Semiconductor's IOH, ML7213/ML7223/ML7831. ML7213 which is for IVI(In-Vehicle Infotainment) use. ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general purpose use. ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. |
c47dda7d1 pch_phub: add new... |
451 |
|
cf4ece534 add Packet hub dr... |
452 453 |
To compile this driver as a module, choose M here: the module will be called pch_phub. |
a1bb73d76 drivers/misc: add... |
454 455 456 457 458 459 460 461 |
config USB_SWITCH_FSA9480 tristate "FSA9480 USB Switch" depends on I2C help The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully controlled using I2C and enables USB data, stereo and mono audio, video, microphone and UART data to use a common connector port. |
99f09bebb misc: Add driver ... |
462 463 464 465 466 467 468 |
config MAX8997_MUIC tristate "MAX8997 MUIC Support" depends on MFD_MAX8997 help If you say yes here you get support for the MUIC device of Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory detector and switch. |
4e17e1db9 Add c2 port support |
469 |
source "drivers/misc/c2port/Kconfig" |
5195e5093 i2c: Move at24 to... |
470 |
source "drivers/misc/eeprom/Kconfig" |
5f5bac827 mmc: Driver for C... |
471 |
source "drivers/misc/cb710/Kconfig" |
ab69a5ae2 iwmc3200top: Add ... |
472 |
source "drivers/misc/iwmc3200top/Kconfig" |
2bb32e84a misc: ti-st: Kcon... |
473 |
source "drivers/misc/ti-st/Kconfig" |
ff606677f Move lis3lv02d dr... |
474 |
source "drivers/misc/lis3lv02d/Kconfig" |
c186f0e17 misc: Add CARMA D... |
475 |
source "drivers/misc/carma/Kconfig" |
cff4fa841 [media] altera-st... |
476 |
source "drivers/misc/altera-stapl/Kconfig" |
4e17e1db9 Add c2 port support |
477 |
|
7bf1fc432 kconfig: no STRAN... |
478 |
endif # MISC_DEVICES |