/******************************************************************************
  *                  QLOGIC LINUX SOFTWARE
  *
  * QLogic  QLA1280 (Ultra2)  and  QLA12160 (Ultra3) SCSI driver
  * Copyright (C) 2000 Qlogic Corporation (www.qlogic.com)
  * Copyright (C) 2001-2004 Jes Sorensen, Wild Open Source Inc.
  * Copyright (C) 2003-2004 Christoph Hellwig
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
  * later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  *
  ******************************************************************************/

  #define QLA1280_VERSION      "3.27.1"

  /*****************************************************************************
      Revision History:

      Rev  3.27.1, February 8, 2010, Michael Reed
  	- Retain firmware image for error recovery.

      Rev  3.27, February 10, 2009, Michael Reed
  	- General code cleanup.
  	- Improve error recovery.

      Rev  3.26, January 16, 2006 Jes Sorensen
  	- Ditch all < 2.6 support

      Rev  3.25.1, February 10, 2005 Christoph Hellwig
  	- use pci_map_single to map non-S/G requests
  	- remove qla1280_proc_info
      Rev  3.25, September 28, 2004, Christoph Hellwig
  	- add support for ISP1020/1040
  	- don't include "scsi.h" anymore for 2.6.x
      Rev  3.24.4 June 7, 2004 Christoph Hellwig
  	- restructure firmware loading, cleanup initialization code
  	- prepare support for ISP1020/1040 chips
      Rev  3.24.3 January 19, 2004, Jes Sorensen
  	- Handle PCI DMA mask settings correctly
  	- Correct order of error handling in probe_one, free_irq should not
  	  be called if request_irq failed
      Rev  3.24.2 January 19, 2004, James Bottomley & Andrew Vasquez
  	- Big endian fixes (James)
  	- Remove bogus IOCB content on zero data transfer commands (Andrew)
      Rev  3.24.1 January 5, 2004, Jes Sorensen
  	- Initialize completion queue to avoid OOPS on probe
  	- Handle interrupts during mailbox testing
      Rev  3.24 November 17, 2003, Christoph Hellwig
      	- use struct list_head for completion queue
  	- avoid old Scsi_FOO typedefs
  	- cleanup 2.4 compat glue a bit
  	- use <scsi/scsi_*.h> headers on 2.6 instead of "scsi.h"
  	- make initialization for memory mapped vs port I/O more similar
  	- remove broken pci config space manipulation
  	- kill more cruft
  	- this is an almost perfect 2.6 scsi driver now! ;)
      Rev  3.23.39 December 17, 2003, Jes Sorensen
  	- Delete completion queue from srb if mailbox command failed to
  	  to avoid qla1280_done completeting qla1280_error_action's
  	  obsolete context
  	- Reduce arguments for qla1280_done
      Rev  3.23.38 October 18, 2003, Christoph Hellwig
  	- Convert to new-style hotplugable driver for 2.6
  	- Fix missing scsi_unregister/scsi_host_put on HBA removal
  	- Kill some more cruft
      Rev  3.23.37 October 1, 2003, Jes Sorensen
  	- Make MMIO depend on CONFIG_X86_VISWS instead of yet another
  	  random CONFIG option
  	- Clean up locking in probe path
      Rev  3.23.36 October 1, 2003, Christoph Hellwig
  	- queuecommand only ever receives new commands - clear flags
  	- Reintegrate lost fixes from Linux 2.5
      Rev  3.23.35 August 14, 2003, Jes Sorensen
  	- Build against 2.6
      Rev  3.23.34 July 23, 2003, Jes Sorensen
  	- Remove pointless TRUE/FALSE macros
  	- Clean up vchan handling
      Rev  3.23.33 July 3, 2003, Jes Sorensen
  	- Don't define register access macros before define determining MMIO.

  	  This just happened to work out on ia64 but not elsewhere.

  	- Don't try and read from the card while it is in reset as
  	  it won't respond and causes an MCA
      Rev  3.23.32 June 23, 2003, Jes Sorensen
  	- Basic support for boot time arguments
      Rev  3.23.31 June 8, 2003, Jes Sorensen
  	- Reduce boot time messages
      Rev  3.23.30 June 6, 2003, Jes Sorensen
  	- Do not enable sync/wide/ppr before it has been determined
  	  that the target device actually supports it
  	- Enable DMA arbitration for multi channel controllers
      Rev  3.23.29 June 3, 2003, Jes Sorensen
  	- Port to 2.5.69
      Rev  3.23.28 June 3, 2003, Jes Sorensen
  	- Eliminate duplicate marker commands on bus resets
  	- Handle outstanding commands appropriately on bus/device resets
      Rev  3.23.27 May 28, 2003, Jes Sorensen
  	- Remove bogus input queue code, let the Linux SCSI layer do the work
  	- Clean up NVRAM handling, only read it once from the card
  	- Add a number of missing default nvram parameters
      Rev  3.23.26 Beta May 28, 2003, Jes Sorensen
  	- Use completion queue for mailbox commands instead of busy wait
      Rev  3.23.25 Beta May 27, 2003, James Bottomley
  	- Migrate to use new error handling code
      Rev  3.23.24 Beta May 21, 2003, James Bottomley
  	- Big endian support
  	- Cleanup data direction code
      Rev  3.23.23 Beta May 12, 2003, Jes Sorensen
  	- Switch to using MMIO instead of PIO
      Rev  3.23.22 Beta April 15, 2003, Jes Sorensen
  	- Fix PCI parity problem with 12160 during reset.
      Rev  3.23.21 Beta April 14, 2003, Jes Sorensen
  	- Use pci_map_page()/pci_unmap_page() instead of map_single version.
      Rev  3.23.20 Beta April 9, 2003, Jes Sorensen
  	- Remove < 2.4.x support
  	- Introduce HOST_LOCK to make the spin lock changes portable.
  	- Remove a bunch of idiotic and unnecessary typedef's
  	- Kill all leftovers of target-mode support which never worked anyway
      Rev  3.23.19 Beta April 11, 2002, Linus Torvalds
  	- Do qla1280_pci_config() before calling request_irq() and
  	  request_region()
  	- Use pci_dma_hi32() to handle upper word of DMA addresses instead
  	  of large shifts
  	- Hand correct arguments to free_irq() in case of failure
      Rev  3.23.18 Beta April 11, 2002, Jes Sorensen
  	- Run source through Lindent and clean up the output
      Rev  3.23.17 Beta April 11, 2002, Jes Sorensen
  	- Update SCSI firmware to qla1280 v8.15.00 and qla12160 v10.04.32
      Rev  3.23.16 Beta March 19, 2002, Jes Sorensen
  	- Rely on mailbox commands generating interrupts - do not
  	  run qla1280_isr() from ql1280_mailbox_command()
  	- Remove device_reg_t
  	- Integrate ql12160_set_target_parameters() with 1280 version
  	- Make qla1280_setup() non static
  	- Do not call qla1280_check_for_dead_scsi_bus() on every I/O request

  	  sent to the card - this command pauses the firmware!!!

      Rev  3.23.15 Beta March 19, 2002, Jes Sorensen
  	- Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions
  	- Remove a pile of pointless and confusing (srb_t **) and
  	  (scsi_lu_t *) typecasts
  	- Explicit mark that we do not use the new error handling (for now)
  	- Remove scsi_qla_host_t and use 'struct' instead
  	- Remove in_abort, watchdog_enabled, dpc, dpc_sched, bios_enabled,
  	  pci_64bit_slot flags which weren't used for anything anyway
  	- Grab host->host_lock while calling qla1280_isr() from abort()
  	- Use spin_lock()/spin_unlock() in qla1280_intr_handler() - we
  	  do not need to save/restore flags in the interrupt handler
  	- Enable interrupts early (before any mailbox access) in preparation
  	  for cleaning up the mailbox handling
      Rev  3.23.14 Beta March 14, 2002, Jes Sorensen
  	- Further cleanups. Remove all trace of QL_DEBUG_LEVEL_x and replace
  	  it with proper use of dprintk().
  	- Make qla1280_print_scsi_cmd() and qla1280_dump_buffer() both take
  	  a debug level argument to determine if data is to be printed
  	- Add KERN_* info to printk()
      Rev  3.23.13 Beta March 14, 2002, Jes Sorensen
  	- Significant cosmetic cleanups
  	- Change debug code to use dprintk() and remove #if mess
      Rev  3.23.12 Beta March 13, 2002, Jes Sorensen
  	- More cosmetic cleanups, fix places treating return as function
  	- use cpu_relax() in qla1280_debounce_register()
      Rev  3.23.11 Beta March 13, 2002, Jes Sorensen
  	- Make it compile under 2.5.5
      Rev  3.23.10 Beta October 1, 2001, Jes Sorensen
  	- Do no typecast short * to long * in QL1280BoardTbl, this
  	  broke miserably on big endian boxes
      Rev  3.23.9 Beta September 30, 2001, Jes Sorensen
  	- Remove pre 2.2 hack for checking for reentrance in interrupt handler
  	- Make data types used to receive from SCSI_{BUS,TCN,LUN}_32
  	  unsigned int to match the types from struct scsi_cmnd
      Rev  3.23.8 Beta September 29, 2001, Jes Sorensen
  	- Remove bogus timer_t typedef from qla1280.h
  	- Remove obsolete pre 2.2 PCI setup code, use proper #define's
  	  for PCI_ values, call pci_set_master()
  	- Fix memleak of qla1280_buffer on module unload
  	- Only compile module parsing code #ifdef MODULE - should be
  	  changed to use individual MODULE_PARM's later
  	- Remove dummy_buffer that was never modified nor printed
  	- ENTER()/LEAVE() are noops unless QL_DEBUG_LEVEL_3, hence remove
  	  #ifdef QL_DEBUG_LEVEL_3/#endif around ENTER()/LEAVE() calls
  	- Remove \r from print statements, this is Linux, not DOS
  	- Remove obsolete QLA1280_{SCSILU,INTR,RING}_{LOCK,UNLOCK}
  	  dummy macros
  	- Remove C++ compile hack in header file as Linux driver are not
  	  supposed to be compiled as C++
  	- Kill MS_64BITS macro as it makes the code more readable
  	- Remove unnecessary flags.in_interrupts bit
      Rev  3.23.7 Beta August 20, 2001, Jes Sorensen
  	- Dont' check for set flags on q->q_flag one by one in qla1280_next()
          - Check whether the interrupt was generated by the QLA1280 before
            doing any processing
  	- qla1280_status_entry(): Only zero out part of sense_buffer that
  	  is not being copied into
  	- Remove more superflouous typecasts
  	- qla1280_32bit_start_scsi() replace home-brew memcpy() with memcpy()
      Rev  3.23.6 Beta August 20, 2001, Tony Luck, Intel
          - Don't walk the entire list in qla1280_putq_t() just to directly
  	  grab the pointer to the last element afterwards
      Rev  3.23.5 Beta August 9, 2001, Jes Sorensen

  	- Don't use IRQF_DISABLED, it's use is deprecated for this kinda driver

      Rev  3.23.4 Beta August 8, 2001, Jes Sorensen
  	- Set dev->max_sectors to 1024
      Rev  3.23.3 Beta August 6, 2001, Jes Sorensen
  	- Provide compat macros for pci_enable_device(), pci_find_subsys()
  	  and scsi_set_pci_device()
  	- Call scsi_set_pci_device() for all devices
  	- Reduce size of kernel version dependent device probe code
  	- Move duplicate probe/init code to separate function
  	- Handle error if qla1280_mem_alloc() fails
  	- Kill OFFSET() macro and use Linux's PCI definitions instead
          - Kill private structure defining PCI config space (struct config_reg)
  	- Only allocate I/O port region if not in MMIO mode
  	- Remove duplicate (unused) sanity check of sife of srb_t
      Rev  3.23.2 Beta August 6, 2001, Jes Sorensen
  	- Change home-brew memset() implementations to use memset()
          - Remove all references to COMTRACE() - accessing a PC's COM2 serial
            port directly is not legal under Linux.
      Rev  3.23.1 Beta April 24, 2001, Jes Sorensen
          - Remove pre 2.2 kernel support
          - clean up 64 bit DMA setting to use 2.4 API (provide backwards compat)
          - Fix MMIO access to use readl/writel instead of directly
            dereferencing pointers
          - Nuke MSDOS debugging code
          - Change true/false data types to int from uint8_t
          - Use int for counters instead of uint8_t etc.
          - Clean up size & byte order conversion macro usage
      Rev  3.23 Beta January 11, 2001 BN Qlogic
          - Added check of device_id when handling non
            QLA12160s during detect().
      Rev  3.22 Beta January 5, 2001 BN Qlogic
          - Changed queue_task() to schedule_task()
            for kernels 2.4.0 and higher.
            Note: 2.4.0-testxx kernels released prior to
                  the actual 2.4.0 kernel release on January 2001
                  will get compile/link errors with schedule_task().
                  Please update your kernel to released 2.4.0 level,
                  or comment lines in this file flagged with  3.22
                  to resolve compile/link error of schedule_task().
          - Added -DCONFIG_SMP in addition to -D__SMP__
            in Makefile for 2.4.0 builds of driver as module.
      Rev  3.21 Beta January 4, 2001 BN Qlogic
          - Changed criteria of 64/32 Bit mode of HBA
            operation according to BITS_PER_LONG rather
            than HBA's NVRAM setting of >4Gig memory bit;
            so that the HBA auto-configures without the need
            to setup each system individually.
      Rev  3.20 Beta December 5, 2000 BN Qlogic
          - Added priority handling to IA-64  onboard SCSI
            ISP12160 chip for kernels greater than 2.3.18.
          - Added irqrestore for qla1280_intr_handler.
          - Enabled /proc/scsi/qla1280 interface.
          - Clear /proc/scsi/qla1280 counters in detect().
      Rev  3.19 Beta October 13, 2000 BN Qlogic
          - Declare driver_template for new kernel
            (2.4.0 and greater) scsi initialization scheme.
          - Update /proc/scsi entry for 2.3.18 kernels and
            above as qla1280
      Rev  3.18 Beta October 10, 2000 BN Qlogic
          - Changed scan order of adapters to map
            the QLA12160 followed by the QLA1280.
      Rev  3.17 Beta September 18, 2000 BN Qlogic
          - Removed warnings for 32 bit 2.4.x compiles
          - Corrected declared size for request and response
            DMA addresses that are kept in each ha
      Rev. 3.16 Beta  August 25, 2000   BN  Qlogic
          - Corrected 64 bit addressing issue on IA-64
            where the upper 32 bits were not properly
            passed to the RISC engine.
      Rev. 3.15 Beta  August 22, 2000   BN  Qlogic
          - Modified qla1280_setup_chip to properly load
            ISP firmware for greater that 4 Gig memory on IA-64
      Rev. 3.14 Beta  August 16, 2000   BN  Qlogic
          - Added setting of dma_mask to full 64 bit
            if flags.enable_64bit_addressing is set in NVRAM
      Rev. 3.13 Beta  August 16, 2000   BN  Qlogic
          - Use new PCI DMA mapping APIs for 2.4.x kernel
      Rev. 3.12       July 18, 2000    Redhat & BN Qlogic
          - Added check of pci_enable_device to detect() for 2.3.x
          - Use pci_resource_start() instead of
            pdev->resource[0].start in detect() for 2.3.x
          - Updated driver version
      Rev. 3.11       July 14, 2000    BN  Qlogic
  	- Updated SCSI Firmware to following versions:
  	  qla1x80:   8.13.08
  	  qla1x160:  10.04.08
  	- Updated driver version to 3.11
      Rev. 3.10    June 23, 2000   BN Qlogic
          - Added filtering of AMI SubSys Vendor ID devices
      Rev. 3.9
          - DEBUG_QLA1280 undefined and  new version  BN Qlogic
      Rev. 3.08b      May 9, 2000    MD Dell
          - Added logic to check against AMI subsystem vendor ID
  	Rev. 3.08       May 4, 2000    DG  Qlogic
          - Added logic to check for PCI subsystem ID.
  	Rev. 3.07       Apr 24, 2000    DG & BN  Qlogic
  	   - Updated SCSI Firmware to following versions:
  	     qla12160:   10.01.19
  		 qla1280:     8.09.00
  	Rev. 3.06       Apr 12, 2000    DG & BN  Qlogic
  	   - Internal revision; not released
      Rev. 3.05       Mar 28, 2000    DG & BN  Qlogic
         - Edit correction for virt_to_bus and PROC.
      Rev. 3.04       Mar 28, 2000    DG & BN  Qlogic
         - Merge changes from ia64 port.
      Rev. 3.03       Mar 28, 2000    BN  Qlogic
         - Increase version to reflect new code drop with compile fix
           of issue with inclusion of linux/spinlock for 2.3 kernels
      Rev. 3.02       Mar 15, 2000    BN  Qlogic
         - Merge qla1280_proc_info from 2.10 code base
      Rev. 3.01       Feb 10, 2000    BN  Qlogic
         - Corrected code to compile on a 2.2.x kernel.
      Rev. 3.00       Jan 17, 2000    DG  Qlogic
  	   - Added 64-bit support.
      Rev. 2.07       Nov 9, 1999     DG  Qlogic
  	   - Added new routine to set target parameters for ISP12160.
      Rev. 2.06       Sept 10, 1999     DG  Qlogic
         - Added support for ISP12160 Ultra 3 chip.
      Rev. 2.03       August 3, 1999    Fred Lewis, Intel DuPont
  	- Modified code to remove errors generated when compiling with
  	  Cygnus IA64 Compiler.
          - Changed conversion of pointers to unsigned longs instead of integers.
          - Changed type of I/O port variables from uint32_t to unsigned long.
          - Modified OFFSET macro to work with 64-bit as well as 32-bit.
          - Changed sprintf and printk format specifiers for pointers to %p.
          - Changed some int to long type casts where needed in sprintf & printk.
          - Added l modifiers to sprintf and printk format specifiers for longs.
          - Removed unused local variables.
      Rev. 1.20       June 8, 1999      DG,  Qlogic
           Changes to support RedHat release 6.0 (kernel 2.2.5).
         - Added SCSI exclusive access lock (io_request_lock) when accessing
           the adapter.
         - Added changes for the new LINUX interface template. Some new error
           handling routines have been added to the template, but for now we
           will use the old ones.
      -   Initial Beta Release.
  *****************************************************************************/

  #include <linux/module.h>

  #include <linux/types.h>
  #include <linux/string.h>
  #include <linux/errno.h>
  #include <linux/kernel.h>
  #include <linux/ioport.h>
  #include <linux/delay.h>
  #include <linux/timer.h>

  #include <linux/pci.h>
  #include <linux/proc_fs.h>
  #include <linux/stat.h>

  #include <linux/pci_ids.h>
  #include <linux/interrupt.h>
  #include <linux/init.h>

  #include <linux/dma-mapping.h>

  #include <linux/firmware.h>

  
  #include <asm/io.h>
  #include <asm/irq.h>
  #include <asm/byteorder.h>
  #include <asm/processor.h>
  #include <asm/types.h>
  #include <asm/system.h>

  #include <scsi/scsi.h>
  #include <scsi/scsi_cmnd.h>
  #include <scsi/scsi_device.h>
  #include <scsi/scsi_host.h>
  #include <scsi/scsi_tcq.h>

  
  #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
  #include <asm/sn/io.h>
  #endif

  
  /*
   * Compile time Options:
   *            0 - Disable and 1 - Enable
   */
  #define  DEBUG_QLA1280_INTR	0
  #define  DEBUG_PRINT_NVRAM	0
  #define  DEBUG_QLA1280		0
  
  /*
   * The SGI VISWS is broken and doesn't support MMIO ;-(
   */
  #ifdef CONFIG_X86_VISWS
  #define	MEMORY_MAPPED_IO	0
  #else
  #define	MEMORY_MAPPED_IO	1
  #endif

  #include "qla1280.h"

  #ifndef BITS_PER_LONG
  #error "BITS_PER_LONG not defined!"
  #endif
  #if (BITS_PER_LONG == 64) || defined CONFIG_HIGHMEM
  #define QLA_64BIT_PTR	1
  #endif
  
  #ifdef QLA_64BIT_PTR
  #define pci_dma_hi32(a)			((a >> 16) >> 16)
  #else
  #define pci_dma_hi32(a)			0
  #endif
  #define pci_dma_lo32(a)			(a & 0xffffffff)
  
  #define NVRAM_DELAY()			udelay(500)	/* 2 microseconds */

  #if defined(__ia64__) && !defined(ia64_platform_is)
  #define ia64_platform_is(foo)		(!strcmp(x, platform_name))
  #endif
  
  
  #define IS_ISP1040(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020)
  #define IS_ISP1x40(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020 || \
  			ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1240)
  #define IS_ISP1x160(ha)        (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \
  				ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160)
  
  
  static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *);
  static void qla1280_remove_one(struct pci_dev *);
  
  /*
   *  QLogic Driver Support Function Prototypes.
   */
  static void qla1280_done(struct scsi_qla_host *);

  static int qla1280_get_token(char *);
  static int qla1280_setup(char *s) __init;
  
  /*
   *  QLogic ISP1280 Hardware Support Function Prototypes.
   */
  static int qla1280_load_firmware(struct scsi_qla_host *);
  static int qla1280_init_rings(struct scsi_qla_host *);
  static int qla1280_nvram_config(struct scsi_qla_host *);
  static int qla1280_mailbox_command(struct scsi_qla_host *,
  				   uint8_t, uint16_t *);
  static int qla1280_bus_reset(struct scsi_qla_host *, int);
  static int qla1280_device_reset(struct scsi_qla_host *, int, int);

  static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
  static int qla1280_abort_isp(struct scsi_qla_host *);
  #ifdef QLA_64BIT_PTR
  static int qla1280_64bit_start_scsi(struct scsi_qla_host *, struct srb *);
  #else
  static int qla1280_32bit_start_scsi(struct scsi_qla_host *, struct srb *);
  #endif
  static void qla1280_nv_write(struct scsi_qla_host *, uint16_t);
  static void qla1280_poll(struct scsi_qla_host *);
  static void qla1280_reset_adapter(struct scsi_qla_host *);
  static void qla1280_marker(struct scsi_qla_host *, int, int, int, u8);
  static void qla1280_isp_cmd(struct scsi_qla_host *);
  static void qla1280_isr(struct scsi_qla_host *, struct list_head *);
  static void qla1280_rst_aen(struct scsi_qla_host *);
  static void qla1280_status_entry(struct scsi_qla_host *, struct response *,
  				 struct list_head *);
  static void qla1280_error_entry(struct scsi_qla_host *, struct response *,
  				struct list_head *);
  static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *, uint32_t);
  static uint16_t qla1280_nvram_request(struct scsi_qla_host *, uint32_t);
  static uint16_t qla1280_debounce_register(volatile uint16_t __iomem *);
  static request_t *qla1280_req_pkt(struct scsi_qla_host *);
  static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *,
  					   unsigned int);
  static void qla1280_get_target_parameters(struct scsi_qla_host *,
  					   struct scsi_device *);
  static int qla1280_set_target_parameters(struct scsi_qla_host *, int, int);
  
  
  static struct qla_driver_setup driver_setup;
  
  /*
   * convert scsi data direction to request_t control flags
   */
  static inline uint16_t
  qla1280_data_direction(struct scsi_cmnd *cmnd)
  {
  	switch(cmnd->sc_data_direction) {
  	case DMA_FROM_DEVICE:
  		return BIT_5;
  	case DMA_TO_DEVICE:
  		return BIT_6;
  	case DMA_BIDIRECTIONAL:
  		return BIT_5 | BIT_6;
  	/*
  	 * We could BUG() on default here if one of the four cases aren't
  	 * met, but then again if we receive something like that from the
  	 * SCSI layer we have more serious problems. This shuts up GCC.
  	 */
  	case DMA_NONE:
  	default:
  		return 0;
  	}
  }
  		
  #if DEBUG_QLA1280
  static void __qla1280_print_scsi_cmd(struct scsi_cmnd * cmd);
  static void __qla1280_dump_buffer(char *, int);
  #endif
  
  
  /*
   * insmod needs to find the variable and make it point to something
   */
  #ifdef MODULE
  static char *qla1280;
  
  /* insmod qla1280 options=verbose" */
  module_param(qla1280, charp, 0);
  #else
  __setup("qla1280=", qla1280_setup);
  #endif
  
  
  /*
   * We use the scsi_pointer structure that's included with each scsi_command
   * to overlay our struct srb over it. qla1280_init() checks that a srb is not
   * bigger than a scsi_pointer.
   */
  
  #define	CMD_SP(Cmnd)		&Cmnd->SCp
  #define	CMD_CDBLEN(Cmnd)	Cmnd->cmd_len
  #define	CMD_CDBP(Cmnd)		Cmnd->cmnd
  #define	CMD_SNSP(Cmnd)		Cmnd->sense_buffer

  #define	CMD_SNSLEN(Cmnd)	SCSI_SENSE_BUFFERSIZE

  #define	CMD_RESULT(Cmnd)	Cmnd->result
  #define	CMD_HANDLE(Cmnd)	Cmnd->host_scribble

  #define CMD_REQUEST(Cmnd)	Cmnd->request->cmd

  
  #define CMD_HOST(Cmnd)		Cmnd->device->host
  #define SCSI_BUS_32(Cmnd)	Cmnd->device->channel
  #define SCSI_TCN_32(Cmnd)	Cmnd->device->id
  #define SCSI_LUN_32(Cmnd)	Cmnd->device->lun
  
  
  /*****************************************/
  /*   ISP Boards supported by this driver */
  /*****************************************/
  
  struct qla_boards {

  	char *name;		/* Board ID String */

  	int numPorts;		/* Number of SCSI ports */

  	int fw_index;		/* index into qla1280_fw_tbl for firmware */

  };
  
  /* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
  static struct pci_device_id qla1280_pci_tbl[] = {
  	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160,
  		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},

  	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
  		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},

  	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080,
  		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
  	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240,
  		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
  	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1280,
  		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
  	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP10160,
  		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
  	{0,}
  };
  MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);

  DEFINE_MUTEX(qla1280_firmware_mutex);
  
  struct qla_fw {
  	char *fwname;
  	const struct firmware *fw;
  };
  
  #define QL_NUM_FW_IMAGES 3
  
  struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
  	{"qlogic/1040.bin",  NULL},	/* image 0 */
  	{"qlogic/1280.bin",  NULL},	/* image 1 */
  	{"qlogic/12160.bin", NULL},	/* image 2 */
  };
  
  /* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */

  static struct qla_boards ql1280_board_tbl[] = {

  	{.name = "QLA12160", .numPorts = 2, .fw_index = 2},
  	{.name = "QLA1040" , .numPorts = 1, .fw_index = 0},
  	{.name = "QLA1080" , .numPorts = 1, .fw_index = 1},
  	{.name = "QLA1240" , .numPorts = 2, .fw_index = 1},
  	{.name = "QLA1280" , .numPorts = 2, .fw_index = 1},
  	{.name = "QLA10160", .numPorts = 1, .fw_index = 2},
  	{.name = "        ", .numPorts = 0, .fw_index = -1},

  };
  
  static int qla1280_verbose = 1;
  
  #if DEBUG_QLA1280
  static int ql_debug_level = 1;
  #define dprintk(level, format, a...)	\
  	do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0)
  #define qla1280_dump_buffer(level, buf, size)	\
  	if (ql_debug_level >= level) __qla1280_dump_buffer(buf, size)
  #define qla1280_print_scsi_cmd(level, cmd)	\
  	if (ql_debug_level >= level) __qla1280_print_scsi_cmd(cmd)
  #else
  #define ql_debug_level			0
  #define dprintk(level, format, a...)	do{}while(0)
  #define qla1280_dump_buffer(a, b, c)	do{}while(0)
  #define qla1280_print_scsi_cmd(a, b)	do{}while(0)
  #endif
  
  #define ENTER(x)		dprintk(3, "qla1280 : Entering %s()
  ", x);
  #define LEAVE(x)		dprintk(3, "qla1280 : Leaving %s()
  ", x);
  #define ENTER_INTR(x)		dprintk(4, "qla1280 : Entering %s()
  ", x);
  #define LEAVE_INTR(x)		dprintk(4, "qla1280 : Leaving %s()
  ", x);
  
  
  static int qla1280_read_nvram(struct scsi_qla_host *ha)
  {
  	uint16_t *wptr;
  	uint8_t chksum;
  	int cnt, i;
  	struct nvram *nv;
  
  	ENTER("qla1280_read_nvram");
  
  	if (driver_setup.no_nvram)
  		return 1;
  
  	printk(KERN_INFO "scsi(%ld): Reading NVRAM
  ", ha->host_no);
  
  	wptr = (uint16_t *)&ha->nvram;
  	nv = &ha->nvram;
  	chksum = 0;
  	for (cnt = 0; cnt < 3; cnt++) {
  		*wptr = qla1280_get_nvram_word(ha, cnt);
  		chksum += *wptr & 0xff;
  		chksum += (*wptr >> 8) & 0xff;
  		wptr++;
  	}
  
  	if (nv->id0 != 'I' || nv->id1 != 'S' ||
  	    nv->id2 != 'P' || nv->id3 != ' ' || nv->version < 1) {
  		dprintk(2, "Invalid nvram ID or version!
  ");
  		chksum = 1;
  	} else {
  		for (; cnt < sizeof(struct nvram); cnt++) {
  			*wptr = qla1280_get_nvram_word(ha, cnt);
  			chksum += *wptr & 0xff;
  			chksum += (*wptr >> 8) & 0xff;
  			wptr++;
  		}
  	}
  
  	dprintk(3, "qla1280_read_nvram: NVRAM Magic ID= %c %c %c %02x"
  	       " version %i
  ", nv->id0, nv->id1, nv->id2, nv->id3,
  	       nv->version);
  
  
  	if (chksum) {
  		if (!driver_setup.no_nvram)
  			printk(KERN_WARNING "scsi(%ld): Unable to identify or "
  			       "validate NVRAM checksum, using default "
  			       "settings
  ", ha->host_no);
  		ha->nvram_valid = 0;
  	} else
  		ha->nvram_valid = 1;
  
  	/* The firmware interface is, um, interesting, in that the
  	 * actual firmware image on the chip is little endian, thus,
  	 * the process of taking that image to the CPU would end up

  	 * little endian.  However, the firmware interface requires it

  	 * to be read a word (two bytes) at a time.
  	 *
  	 * The net result of this would be that the word (and
  	 * doubleword) quantites in the firmware would be correct, but
  	 * the bytes would be pairwise reversed.  Since most of the
  	 * firmware quantites are, in fact, bytes, we do an extra
  	 * le16_to_cpu() in the firmware read routine.
  	 *
  	 * The upshot of all this is that the bytes in the firmware
  	 * are in the correct places, but the 16 and 32 bit quantites
  	 * are still in little endian format.  We fix that up below by
  	 * doing extra reverses on them */
  	nv->isp_parameter = cpu_to_le16(nv->isp_parameter);
  	nv->firmware_feature.w = cpu_to_le16(nv->firmware_feature.w);
  	for(i = 0; i < MAX_BUSES; i++) {
  		nv->bus[i].selection_timeout = cpu_to_le16(nv->bus[i].selection_timeout);
  		nv->bus[i].max_queue_depth = cpu_to_le16(nv->bus[i].max_queue_depth);
  	}
  	dprintk(1, "qla1280_read_nvram: Completed Reading NVRAM
  ");
  	LEAVE("qla1280_read_nvram");
  
  	return chksum;
  }
  
  /**************************************************************************
   *   qla1280_info
   *     Return a string describing the driver.
   **************************************************************************/
  static const char *
  qla1280_info(struct Scsi_Host *host)
  {
  	static char qla1280_scsi_name_buffer[125];
  	char *bp;
  	struct scsi_qla_host *ha;
  	struct qla_boards *bdp;
  
  	bp = &qla1280_scsi_name_buffer[0];
  	ha = (struct scsi_qla_host *)host->hostdata;
  	bdp = &ql1280_board_tbl[ha->devnum];
  	memset(bp, 0, sizeof(qla1280_scsi_name_buffer));
  
  	sprintf (bp,
  		 "QLogic %s PCI to SCSI Host Adapter
  "
  		 "       Firmware version: %2d.%02d.%02d, Driver version %s",

  		 &bdp->name[0], ha->fwver1, ha->fwver2, ha->fwver3,

  		 QLA1280_VERSION);
  	return bp;
  }
  
  /**************************************************************************

   *   qla1280_queuecommand

   *     Queue a command to the controller.
   *
   * Note:
   * The mid-level driver tries to ensures that queuecommand never gets invoked
   * concurrently with itself or the interrupt handler (although the
   * interrupt handler may call this routine as part of request-completion
   * handling).   Unfortunely, it sometimes calls the scheduler in interrupt
   * context which is a big NO! NO!.
   **************************************************************************/
  static int

  qla1280_queuecommand_lck(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))

  {
  	struct Scsi_Host *host = cmd->device->host;
  	struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;

  	struct srb *sp = (struct srb *)CMD_SP(cmd);

  	int status;
  
  	cmd->scsi_done = fn;
  	sp->cmd = cmd;
  	sp->flags = 0;

  	sp->wait = NULL;
  	CMD_HANDLE(cmd) = (unsigned char *)NULL;

  
  	qla1280_print_scsi_cmd(5, cmd);
  
  #ifdef QLA_64BIT_PTR
  	/*
  	 * Using 64 bit commands if the PCI bridge doesn't support it is a
  	 * bit wasteful, however this should really only happen if one's
  	 * PCI controller is completely broken, like the BCM1250. For
  	 * sane hardware this is not an issue.
  	 */
  	status = qla1280_64bit_start_scsi(ha, sp);
  #else
  	status = qla1280_32bit_start_scsi(ha, sp);
  #endif
  	return status;
  }

  static DEF_SCSI_QCMD(qla1280_queuecommand)

  enum action {
  	ABORT_COMMAND,

  	DEVICE_RESET,
  	BUS_RESET,
  	ADAPTER_RESET,

  };

  
  static void qla1280_mailbox_timeout(unsigned long __data)
  {
  	struct scsi_qla_host *ha = (struct scsi_qla_host *)__data;
  	struct device_reg __iomem *reg;
  	reg = ha->iobase;
  
  	ha->mailbox_out[0] = RD_REG_WORD(&reg->mailbox0);
  	printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, "
  	       "ictrl %04x, istatus %04x
  ", ha->host_no, ha->mailbox_out[0],
  	       RD_REG_WORD(&reg->ictrl), RD_REG_WORD(&reg->istatus));
  	complete(ha->mailbox_wait);
  }

  static int
  _qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp,
  				 struct completion *wait)
  {
  	int	status = FAILED;
  	struct scsi_cmnd *cmd = sp->cmd;
  
  	spin_unlock_irq(ha->host->host_lock);
  	wait_for_completion_timeout(wait, 4*HZ);
  	spin_lock_irq(ha->host->host_lock);
  	sp->wait = NULL;
  	if(CMD_HANDLE(cmd) == COMPLETED_HANDLE) {
  		status = SUCCESS;
  		(*cmd->scsi_done)(cmd);
  	}
  	return status;
  }
  
  static int
  qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp)
  {
  	DECLARE_COMPLETION_ONSTACK(wait);
  
  	sp->wait = &wait;
  	return _qla1280_wait_for_single_command(ha, sp, &wait);
  }
  
  static int
  qla1280_wait_for_pending_commands(struct scsi_qla_host *ha, int bus, int target)
  {
  	int		cnt;
  	int		status;
  	struct srb	*sp;
  	struct scsi_cmnd *cmd;
  
  	status = SUCCESS;
  
  	/*
  	 * Wait for all commands with the designated bus/target
  	 * to be completed by the firmware
  	 */
  	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
  		sp = ha->outstanding_cmds[cnt];
  		if (sp) {
  			cmd = sp->cmd;
  
  			if (bus >= 0 && SCSI_BUS_32(cmd) != bus)
  				continue;
  			if (target >= 0 && SCSI_TCN_32(cmd) != target)
  				continue;
  
  			status = qla1280_wait_for_single_command(ha, sp);
  			if (status == FAILED)
  				break;
  		}
  	}
  	return status;
  }

  /**************************************************************************

   * qla1280_error_action

   *    The function will attempt to perform a specified error action and
   *    wait for the results (or time out).
   *
   * Input:
   *      cmd = Linux SCSI command packet of the command that cause the
   *            bus reset.
   *      action = error action to take (see action_t)
   *
   * Returns:
   *      SUCCESS or FAILED
   *

   **************************************************************************/
  static int
  qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
  {
  	struct scsi_qla_host *ha;
  	int bus, target, lun;
  	struct srb *sp;

  	int i, found;
  	int result=FAILED;
  	int wait_for_bus=-1;
  	int wait_for_target = -1;

  	DECLARE_COMPLETION_ONSTACK(wait);

  	ENTER("qla1280_error_action");

  	ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);

  	sp = (struct srb *)CMD_SP(cmd);
  	bus = SCSI_BUS_32(cmd);
  	target = SCSI_TCN_32(cmd);
  	lun = SCSI_LUN_32(cmd);

  
  	dprintk(4, "error_action %i, istatus 0x%04x
  ", action,
  		RD_REG_WORD(&ha->iobase->istatus));
  
  	dprintk(4, "host_cmd 0x%04x, ictrl 0x%04x, jiffies %li
  ",
  		RD_REG_WORD(&ha->iobase->host_cmd),
  		RD_REG_WORD(&ha->iobase->ictrl), jiffies);

  	if (qla1280_verbose)
  		printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
  		       "Handle=0x%p, action=0x%x
  ",
  		       ha->host_no, cmd, CMD_HANDLE(cmd), action);

  	/*

  	 * Check to see if we have the command in the outstanding_cmds[]
  	 * array.  If not then it must have completed before this error
  	 * action was initiated.  If the error_action isn't ABORT_COMMAND
  	 * then the driver must proceed with the requested action.

  	 */

  	found = -1;
  	for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
  		if (sp == ha->outstanding_cmds[i]) {
  			found = i;
  			sp->wait = &wait; /* we'll wait for it to complete */
  			break;

  		}

  	}

  	if (found < 0) {	/* driver doesn't have command */
  		result = SUCCESS;
  		if (qla1280_verbose) {
  			printk(KERN_INFO
  			       "scsi(%ld:%d:%d:%d): specified command has "
  			       "already completed.
  ", ha->host_no, bus,
  				target, lun);
  		}
  	}

  	switch (action) {

  	case ABORT_COMMAND:
  		dprintk(1, "qla1280: RISC aborting command
  ");
  		/*
  		 * The abort might fail due to race when the host_lock
  		 * is released to issue the abort.  As such, we
  		 * don't bother to check the return status.
  		 */
  		if (found >= 0)
  			qla1280_abort_command(ha, sp, found);

  		break;

  	case DEVICE_RESET:
  		if (qla1280_verbose)
  			printk(KERN_INFO
  			       "scsi(%ld:%d:%d:%d): Queueing device reset "
  			       "command.
  ", ha->host_no, bus, target, lun);

  		if (qla1280_device_reset(ha, bus, target) == 0) {
  			/* issued device reset, set wait conditions */
  			wait_for_bus = bus;
  			wait_for_target = target;
  		}

  		break;
  
  	case BUS_RESET:
  		if (qla1280_verbose)

  			printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
  			       "reset.
  ", ha->host_no, bus);

  		if (qla1280_bus_reset(ha, bus) == 0) {
  			/* issued bus reset, set wait conditions */
  			wait_for_bus = bus;
  		}

  		break;
  
  	case ADAPTER_RESET:
  	default:
  		if (qla1280_verbose) {
  			printk(KERN_INFO
  			       "scsi(%ld): Issued ADAPTER RESET
  ",
  			       ha->host_no);
  			printk(KERN_INFO "scsi(%ld): I/O processing will "
  			       "continue automatically
  ", ha->host_no);
  		}
  		ha->flags.reset_active = 1;

  
  		if (qla1280_abort_isp(ha) != 0) {	/* it's dead */
  			result = FAILED;
  		}

  
  		ha->flags.reset_active = 0;
  	}

  	/*
  	 * At this point, the host_lock has been released and retaken
  	 * by the issuance of the mailbox command.
  	 * Wait for the command passed in by the mid-layer if it
  	 * was found by the driver.  It might have been returned
  	 * between eh recovery steps, hence the check of the "found"
  	 * variable.
  	 */

  	if (found >= 0)
  		result = _qla1280_wait_for_single_command(ha, sp, &wait);

  	if (action == ABORT_COMMAND && result != SUCCESS) {
  		printk(KERN_WARNING
  		       "scsi(%li:%i:%i:%i): "
  		       "Unable to abort command!
  ",
  		       ha->host_no, bus, target, lun);
  	}

  	/*
  	 * If the command passed in by the mid-layer has been
  	 * returned by the board, then wait for any additional
  	 * commands which are supposed to complete based upon
  	 * the error action.
  	 *
  	 * All commands are unconditionally returned during a
  	 * call to qla1280_abort_isp(), ADAPTER_RESET.  No need
  	 * to wait for them.
  	 */
  	if (result == SUCCESS && wait_for_bus >= 0) {
  		result = qla1280_wait_for_pending_commands(ha,
  					wait_for_bus, wait_for_target);

  	}

  	dprintk(1, "RESET returning %d
  ", result);
  
  	LEAVE("qla1280_error_action");
  	return result;
  }
  
  /**************************************************************************
   *   qla1280_abort
   *     Abort the specified SCSI command(s).
   **************************************************************************/
  static int
  qla1280_eh_abort(struct scsi_cmnd * cmd)
  {

  	int rc;
  
  	spin_lock_irq(cmd->device->host->host_lock);
  	rc = qla1280_error_action(cmd, ABORT_COMMAND);
  	spin_unlock_irq(cmd->device->host->host_lock);
  
  	return rc;

  }
  
  /**************************************************************************
   *   qla1280_device_reset
   *     Reset the specified SCSI device
   **************************************************************************/
  static int
  qla1280_eh_device_reset(struct scsi_cmnd *cmd)
  {

  	int rc;
  
  	spin_lock_irq(cmd->device->host->host_lock);
  	rc = qla1280_error_action(cmd, DEVICE_RESET);
  	spin_unlock_irq(cmd->device->host->host_lock);
  
  	return rc;

  }
  
  /**************************************************************************
   *   qla1280_bus_reset
   *     Reset the specified bus.
   **************************************************************************/
  static int
  qla1280_eh_bus_reset(struct scsi_cmnd *cmd)
  {

  	int rc;
  
  	spin_lock_irq(cmd->device->host->host_lock);
  	rc = qla1280_error_action(cmd, BUS_RESET);
  	spin_unlock_irq(cmd->device->host->host_lock);
  
  	return rc;

  }
  
  /**************************************************************************
   *   qla1280_adapter_reset
   *     Reset the specified adapter (both channels)
   **************************************************************************/
  static int
  qla1280_eh_adapter_reset(struct scsi_cmnd *cmd)
  {

  	int rc;
  
  	spin_lock_irq(cmd->device->host->host_lock);
  	rc = qla1280_error_action(cmd, ADAPTER_RESET);
  	spin_unlock_irq(cmd->device->host->host_lock);
  
  	return rc;

  }
  
  static int
  qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev,
  		  sector_t capacity, int geom[])
  {
  	int heads, sectors, cylinders;
  
  	heads = 64;
  	sectors = 32;
  	cylinders = (unsigned long)capacity / (heads * sectors);
  	if (cylinders > 1024) {
  		heads = 255;
  		sectors = 63;
  		cylinders = (unsigned long)capacity / (heads * sectors);
  		/* if (cylinders > 1023)
  		   cylinders = 1023; */
  	}
  
  	geom[0] = heads;
  	geom[1] = sectors;
  	geom[2] = cylinders;
  
  	return 0;
  }

   
  /* disable risc and host interrupts */
  static inline void
  qla1280_disable_intrs(struct scsi_qla_host *ha)
  {
  	WRT_REG_WORD(&ha->iobase->ictrl, 0);
  	RD_REG_WORD(&ha->iobase->ictrl);	/* PCI Posted Write flush */
  }
  
  /* enable risc and host interrupts */
  static inline void
  qla1280_enable_intrs(struct scsi_qla_host *ha)
  {
  	WRT_REG_WORD(&ha->iobase->ictrl, (ISP_EN_INT | ISP_EN_RISC));
  	RD_REG_WORD(&ha->iobase->ictrl);	/* PCI Posted Write flush */
  }

  
  /**************************************************************************
   * qla1280_intr_handler
   *   Handles the H/W interrupt
   **************************************************************************/
  static irqreturn_t

  qla1280_intr_handler(int irq, void *dev_id)

  {
  	struct scsi_qla_host *ha;
  	struct device_reg __iomem *reg;
  	u16 data;
  	int handled = 0;
  
  	ENTER_INTR ("qla1280_intr_handler");
  	ha = (struct scsi_qla_host *)dev_id;

  	spin_lock(ha->host->host_lock);

  
  	ha->isr_count++;
  	reg = ha->iobase;

  	qla1280_disable_intrs(ha);

  
  	data = qla1280_debounce_register(&reg->istatus);
  	/* Check for pending interrupts. */
  	if (data & RISC_INT) {	
  		qla1280_isr(ha, &ha->done_q);
  		handled = 1;
  	}
  	if (!list_empty(&ha->done_q))
  		qla1280_done(ha);

  	spin_unlock(ha->host->host_lock);

  	qla1280_enable_intrs(ha);

  
  	LEAVE_INTR("qla1280_intr_handler");
  	return IRQ_RETVAL(handled);
  }
  
  
  static int
  qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
  {
  	uint8_t mr;
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	struct nvram *nv;

  	int status, lun;

  
  	nv = &ha->nvram;
  
  	mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;
  
  	/* Set Target Parameters. */
  	mb[0] = MBC_SET_TARGET_PARAMETERS;

  	mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
  	mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8;
  	mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9;
  	mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10;
  	mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11;
  	mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12;
  	mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13;
  	mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14;
  	mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15;

  
  	if (IS_ISP1x160(ha)) {
  		mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;

  		mb[3] =	(nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8);

  		mb[6] =	(nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
  			 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
  		mr |= BIT_6;
  	} else {

  		mb[3] =	(nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8);

  	}

  	mb[3] |= nv->bus[bus].target[target].sync_period;
  
  	status = qla1280_mailbox_command(ha, mr, mb);

  	/* Set Device Queue Parameters. */
  	for (lun = 0; lun < MAX_LUNS; lun++) {
  		mb[0] = MBC_SET_DEVICE_QUEUE;
  		mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
  		mb[1] |= lun;
  		mb[2] = nv->bus[bus].max_queue_depth;
  		mb[3] = nv->bus[bus].target[target].execution_throttle;
  		status |= qla1280_mailbox_command(ha, 0x0f, mb);
  	}

  
  	if (status)
  		printk(KERN_WARNING "scsi(%ld:%i:%i): "
  		       "qla1280_set_target_parameters() failed
  ",
  		       ha->host_no, bus, target);
  	return status;
  }
  
  
  /**************************************************************************
   *   qla1280_slave_configure
   *
   * Description:
   *   Determines the queue depth for a given device.  There are two ways
   *   a queue depth can be obtained for a tagged queueing device.  One
   *   way is the default queue depth which is determined by whether
   *   If it is defined, then it is used
   *   as the default queue depth.  Otherwise, we use either 4 or 8 as the
   *   default queue depth (dependent on the number of hardware SCBs).
   **************************************************************************/
  static int
  qla1280_slave_configure(struct scsi_device *device)
  {
  	struct scsi_qla_host *ha;
  	int default_depth = 3;
  	int bus = device->channel;
  	int target = device->id;
  	int status = 0;
  	struct nvram *nv;
  	unsigned long flags;
  
  	ha = (struct scsi_qla_host *)device->host->hostdata;
  	nv = &ha->nvram;
  
  	if (qla1280_check_for_dead_scsi_bus(ha, bus))
  		return 1;
  
  	if (device->tagged_supported &&
  	    (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {
  		scsi_adjust_queue_depth(device, MSG_ORDERED_TAG,
  					ha->bus_settings[bus].hiwat);
  	} else {
  		scsi_adjust_queue_depth(device, 0, default_depth);
  	}

  	nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
  	nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;

  	nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;

  
  	if (driver_setup.no_sync ||
  	    (driver_setup.sync_mask &&
  	     (~driver_setup.sync_mask & (1 << target))))

  		nv->bus[bus].target[target].parameter.enable_sync = 0;

  	if (driver_setup.no_wide ||
  	    (driver_setup.wide_mask &&
  	     (~driver_setup.wide_mask & (1 << target))))

  		nv->bus[bus].target[target].parameter.enable_wide = 0;

  	if (IS_ISP1x160(ha)) {
  		if (driver_setup.no_ppr ||
  		    (driver_setup.ppr_mask &&
  		     (~driver_setup.ppr_mask & (1 << target))))
  			nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
  	}

  	spin_lock_irqsave(ha->host->host_lock, flags);

  	if (nv->bus[bus].target[target].parameter.enable_sync)

  		status = qla1280_set_target_parameters(ha, bus, target);
  	qla1280_get_target_parameters(ha, device);

  	spin_unlock_irqrestore(ha->host->host_lock, flags);

  	return status;
  }

  
  /*
   * qla1280_done
   *      Process completed commands.
   *
   * Input:
   *      ha           = adapter block pointer.

   */
  static void
  qla1280_done(struct scsi_qla_host *ha)
  {
  	struct srb *sp;
  	struct list_head *done_q;
  	int bus, target, lun;
  	struct scsi_cmnd *cmd;
  
  	ENTER("qla1280_done");
  
  	done_q = &ha->done_q;
  
  	while (!list_empty(done_q)) {
  		sp = list_entry(done_q->next, struct srb, list);
  
  		list_del(&sp->list);
  	
  		cmd = sp->cmd;
  		bus = SCSI_BUS_32(cmd);
  		target = SCSI_TCN_32(cmd);
  		lun = SCSI_LUN_32(cmd);
  
  		switch ((CMD_RESULT(cmd) >> 16)) {
  		case DID_RESET:
  			/* Issue marker command. */

  			if (!ha->flags.abort_isp_active)
  				qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);

  			break;
  		case DID_ABORT:
  			sp->flags &= ~SRB_ABORT_PENDING;
  			sp->flags |= SRB_ABORTED;

  			break;
  		default:
  			break;
  		}
  
  		/* Release memory used for this I/O */

  		scsi_dma_unmap(cmd);

  
  		/* Call the mid-level driver interrupt handler */

  		ha->actthreads--;

  		if (sp->wait == NULL)
  			(*(cmd)->scsi_done)(cmd);
  		else

  			complete(sp->wait);
  	}
  	LEAVE("qla1280_done");
  }
  
  /*
   * Translates a ISP error to a Linux SCSI error
   */
  static int
  qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
  {
  	int host_status = DID_ERROR;
  	uint16_t comp_status = le16_to_cpu(sts->comp_status);
  	uint16_t state_flags = le16_to_cpu(sts->state_flags);

  	uint32_t residual_length = le32_to_cpu(sts->residual_length);

  	uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
  #if DEBUG_QLA1280_INTR
  	static char *reason[] = {
  		"DID_OK",
  		"DID_NO_CONNECT",
  		"DID_BUS_BUSY",
  		"DID_TIME_OUT",
  		"DID_BAD_TARGET",
  		"DID_ABORT",
  		"DID_PARITY",
  		"DID_ERROR",
  		"DID_RESET",
  		"DID_BAD_INTR"
  	};
  #endif				/* DEBUG_QLA1280_INTR */
  
  	ENTER("qla1280_return_status");
  
  #if DEBUG_QLA1280_INTR
  	/*
  	  dprintk(1, "qla1280_return_status: compl status = 0x%04x
  ",
  	  comp_status);
  	*/
  #endif
  
  	switch (comp_status) {
  	case CS_COMPLETE:
  		host_status = DID_OK;
  		break;
  
  	case CS_INCOMPLETE:
  		if (!(state_flags & SF_GOT_BUS))
  			host_status = DID_NO_CONNECT;
  		else if (!(state_flags & SF_GOT_TARGET))
  			host_status = DID_BAD_TARGET;
  		else if (!(state_flags & SF_SENT_CDB))
  			host_status = DID_ERROR;
  		else if (!(state_flags & SF_TRANSFERRED_DATA))
  			host_status = DID_ERROR;
  		else if (!(state_flags & SF_GOT_STATUS))
  			host_status = DID_ERROR;
  		else if (!(state_flags & SF_GOT_SENSE))
  			host_status = DID_ERROR;
  		break;
  
  	case CS_RESET:
  		host_status = DID_RESET;
  		break;
  
  	case CS_ABORTED:
  		host_status = DID_ABORT;
  		break;
  
  	case CS_TIMEOUT:
  		host_status = DID_TIME_OUT;
  		break;
  
  	case CS_DATA_OVERRUN:
  		dprintk(2, "Data overrun 0x%x
  ", residual_length);

  		dprintk(2, "qla1280_return_status: response packet data
  ");

  		qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE);
  		host_status = DID_ERROR;
  		break;
  
  	case CS_DATA_UNDERRUN:

  		if ((scsi_bufflen(cp) - residual_length) <

  		    cp->underflow) {
  			printk(KERN_WARNING
  			       "scsi: Underflow detected - retrying "
  			       "command.
  ");
  			host_status = DID_ERROR;

  		} else {

  			scsi_set_resid(cp, residual_length);

  			host_status = DID_OK;

  		}

  		break;
  
  	default:
  		host_status = DID_ERROR;
  		break;
  	}
  
  #if DEBUG_QLA1280_INTR
  	dprintk(1, "qla1280 ISP status: host status (%s) scsi status %x
  ",
  		reason[host_status], scsi_status);
  #endif
  
  	LEAVE("qla1280_return_status");
  
  	return (scsi_status & 0xff) | (host_status << 16);
  }
  
  /****************************************************************************/
  /*                QLogic ISP1280 Hardware Support Functions.                */
  /****************************************************************************/

  /*
   * qla1280_initialize_adapter
   *      Initialize board.
   *
   * Input:
   *      ha = adapter block pointer.
   *
   * Returns:
   *      0 = success
   */
  static int __devinit
  qla1280_initialize_adapter(struct scsi_qla_host *ha)
  {
  	struct device_reg __iomem *reg;
  	int status;
  	int bus;

  	unsigned long flags;

  
  	ENTER("qla1280_initialize_adapter");
  
  	/* Clear adapter flags. */
  	ha->flags.online = 0;
  	ha->flags.disable_host_adapter = 0;
  	ha->flags.reset_active = 0;
  	ha->flags.abort_isp_active = 0;

  #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
  	if (ia64_platform_is("sn2")) {
  		printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
  		       "dual channel lockup workaround
  ", ha->host_no);
  		ha->flags.use_pci_vchannel = 1;
  		driver_setup.no_nvram = 1;
  	}
  #endif
  
  	/* TODO: implement support for the 1040 nvram format */
  	if (IS_ISP1040(ha))
  		driver_setup.no_nvram = 1;
  
  	dprintk(1, "Configure PCI space for adapter...
  ");
  
  	reg = ha->iobase;
  
  	/* Insure mailbox registers are free. */
  	WRT_REG_WORD(&reg->semaphore, 0);
  	WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
  	WRT_REG_WORD(&reg->host_cmd, HC_CLR_HOST_INT);
  	RD_REG_WORD(&reg->host_cmd);
  
  	if (qla1280_read_nvram(ha)) {
  		dprintk(2, "qla1280_initialize_adapter: failed to read "
  			"NVRAM
  ");
  	}

  	/*
  	 * It's necessary to grab the spin here as qla1280_mailbox_command
  	 * needs to be able to drop the lock unconditionally to wait
  	 * for completion.

  	 */

  	spin_lock_irqsave(ha->host->host_lock, flags);

  
  	status = qla1280_load_firmware(ha);
  	if (status) {
  		printk(KERN_ERR "scsi(%li): initialize: pci probe failed!
  ",
  		       ha->host_no);
  		goto out;
  	}
  
  	/* Setup adapter based on NVRAM parameters. */
  	dprintk(1, "scsi(%ld): Configure NVRAM parameters
  ", ha->host_no);
  	qla1280_nvram_config(ha);
  
  	if (ha->flags.disable_host_adapter) {
  		status = 1;
  		goto out;
  	}
  
  	status = qla1280_init_rings(ha);
  	if (status)
  		goto out;
  
  	/* Issue SCSI reset, if we can't reset twice then bus is dead */
  	for (bus = 0; bus < ha->ports; bus++) {
  		if (!ha->bus_settings[bus].disable_scsi_reset &&
  		    qla1280_bus_reset(ha, bus) &&
  		    qla1280_bus_reset(ha, bus))
  			ha->bus_settings[bus].scsi_bus_dead = 1;
  	}
  
  	ha->flags.online = 1;
   out:

  	spin_unlock_irqrestore(ha->host->host_lock, flags);

  	if (status)
  		dprintk(2, "qla1280_initialize_adapter: **** FAILED ****
  ");
  
  	LEAVE("qla1280_initialize_adapter");
  	return status;
  }

  /*

   * qla1280_request_firmware
   *      Acquire firmware for chip.  Retain in memory
   *      for error recovery.
   *
   * Input:
   *      ha = adapter block pointer.
   *
   * Returns:
   *      Pointer to firmware image or an error code
   *      cast to pointer via ERR_PTR().
   */
  static const struct firmware *
  qla1280_request_firmware(struct scsi_qla_host *ha)
  {
  	const struct firmware *fw;
  	int err;
  	int index;
  	char *fwname;
  
  	spin_unlock_irq(ha->host->host_lock);
  	mutex_lock(&qla1280_firmware_mutex);
  
  	index = ql1280_board_tbl[ha->devnum].fw_index;
  	fw = qla1280_fw_tbl[index].fw;
  	if (fw)
  		goto out;
  
  	fwname = qla1280_fw_tbl[index].fwname;
  	err = request_firmware(&fw, fwname, &ha->pdev->dev);
  
  	if (err) {
  		printk(KERN_ERR "Failed to load image \"%s\" err %d
  ",
  		       fwname, err);
  		fw = ERR_PTR(err);
  		goto unlock;
  	}
  	if ((fw->size % 2) || (fw->size < 6)) {
  		printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"
  ",
  		       fw->size, fwname);
  		release_firmware(fw);
  		fw = ERR_PTR(-EINVAL);
  		goto unlock;
  	}
  
  	qla1280_fw_tbl[index].fw = fw;
  
   out:
  	ha->fwver1 = fw->data[0];
  	ha->fwver2 = fw->data[1];
  	ha->fwver3 = fw->data[2];
   unlock:
  	mutex_unlock(&qla1280_firmware_mutex);
  	spin_lock_irq(ha->host->host_lock);
  	return fw;
  }
  
  /*

   * Chip diagnostics
   *      Test chip for proper operation.
   *
   * Input:
   *      ha = adapter block pointer.
   *
   * Returns:
   *      0 = success.
   */
  static int
  qla1280_chip_diag(struct scsi_qla_host *ha)
  {
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	struct device_reg __iomem *reg = ha->iobase;
  	int status = 0;
  	int cnt;
  	uint16_t data;
  	dprintk(3, "qla1280_chip_diag: testing device at 0x%p 
  ", &reg->id_l);
  
  	dprintk(1, "scsi(%ld): Verifying chip
  ", ha->host_no);
  
  	/* Soft reset chip and wait for it to finish. */
  	WRT_REG_WORD(&reg->ictrl, ISP_RESET);
  
  	/*
  	 * We can't do a traditional PCI write flush here by reading
  	 * back the register. The card will not respond once the reset
  	 * is in action and we end up with a machine check exception
  	 * instead. Nothing to do but wait and hope for the best.
  	 * A portable pci_write_flush(pdev) call would be very useful here.
  	 */
  	udelay(20);
  	data = qla1280_debounce_register(&reg->ictrl);
  	/*
  	 * Yet another QLogic gem ;-(
  	 */
  	for (cnt = 1000000; cnt && data & ISP_RESET; cnt--) {
  		udelay(5);
  		data = RD_REG_WORD(&reg->ictrl);
  	}
  
  	if (!cnt)
  		goto fail;
  
  	/* Reset register cleared by chip reset. */
  	dprintk(3, "qla1280_chip_diag: reset register cleared by chip reset
  ");
  
  	WRT_REG_WORD(&reg->cfg_1, 0);
  
  	/* Reset RISC and disable BIOS which
  	   allows RISC to execute out of RAM. */
  	WRT_REG_WORD(&reg->host_cmd, HC_RESET_RISC |
  		     HC_RELEASE_RISC | HC_DISABLE_BIOS);
  
  	RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  	data = qla1280_debounce_register(&reg->mailbox0);
  
  	/*
  	 * I *LOVE* this code!
  	 */
  	for (cnt = 1000000; cnt && data == MBS_BUSY; cnt--) {
  		udelay(5);
  		data = RD_REG_WORD(&reg->mailbox0);
  	}
  
  	if (!cnt)
  		goto fail;
  
  	/* Check product ID of chip */
  	dprintk(3, "qla1280_chip_diag: Checking product ID of chip
  ");
  
  	if (RD_REG_WORD(&reg->mailbox1) != PROD_ID_1 ||
  	    (RD_REG_WORD(&reg->mailbox2) != PROD_ID_2 &&
  	     RD_REG_WORD(&reg->mailbox2) != PROD_ID_2a) ||
  	    RD_REG_WORD(&reg->mailbox3) != PROD_ID_3 ||
  	    RD_REG_WORD(&reg->mailbox4) != PROD_ID_4) {
  		printk(KERN_INFO "qla1280: Wrong product ID = "
  		       "0x%x,0x%x,0x%x,0x%x
  ",
  		       RD_REG_WORD(&reg->mailbox1),
  		       RD_REG_WORD(&reg->mailbox2),
  		       RD_REG_WORD(&reg->mailbox3),
  		       RD_REG_WORD(&reg->mailbox4));
  		goto fail;
  	}
  
  	/*
  	 * Enable ints early!!!
  	 */
  	qla1280_enable_intrs(ha);
  
  	dprintk(1, "qla1280_chip_diag: Checking mailboxes of chip
  ");
  	/* Wrap Incoming Mailboxes Test. */
  	mb[0] = MBC_MAILBOX_REGISTER_TEST;
  	mb[1] = 0xAAAA;
  	mb[2] = 0x5555;
  	mb[3] = 0xAA55;
  	mb[4] = 0x55AA;
  	mb[5] = 0xA5A5;
  	mb[6] = 0x5A5A;
  	mb[7] = 0x2525;
  
  	status = qla1280_mailbox_command(ha, 0xff, mb);
  	if (status)
  		goto fail;
  
  	if (mb[1] != 0xAAAA || mb[2] != 0x5555 || mb[3] != 0xAA55 ||
  	    mb[4] != 0x55AA || mb[5] != 0xA5A5 || mb[6] != 0x5A5A ||
  	    mb[7] != 0x2525) {
  		printk(KERN_INFO "qla1280: Failed mbox check
  ");
  		goto fail;
  	}
  
  	dprintk(3, "qla1280_chip_diag: exiting normally
  ");
  	return 0;
   fail:
  	dprintk(2, "qla1280_chip_diag: **** FAILED ****
  ");
  	return status;
  }
  
  static int
  qla1280_load_firmware_pio(struct scsi_qla_host *ha)
  {

  	/* enter with host_lock acquired */

  	const struct firmware *fw;
  	const __le16 *fw_data;
  	uint16_t risc_address, risc_code_size;

  	uint16_t mb[MAILBOX_REGISTER_COUNT], i;

  	int err = 0;
  
  	fw = qla1280_request_firmware(ha);
  	if (IS_ERR(fw))
  		return PTR_ERR(fw);

  	fw_data = (const __le16 *)&fw->data[0];
  	ha->fwstart = __le16_to_cpu(fw_data[2]);

  	/* Load RISC code. */

  	risc_address = ha->fwstart;

  	fw_data = (const __le16 *)&fw->data[6];

  	risc_code_size = (fw->size - 6) / 2;

  
  	for (i = 0; i < risc_code_size; i++) {
  		mb[0] = MBC_WRITE_RAM_WORD;
  		mb[1] = risc_address + i;

  		mb[2] = __le16_to_cpu(fw_data[i]);

  
  		err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
  		if (err) {
  			printk(KERN_ERR "scsi(%li): Failed to load firmware
  ",
  					ha->host_no);

  			break;

  		}
  	}

  	return err;

  }
  
  #define DUMP_IT_BACK 0		/* for debug of RISC loading */
  static int
  qla1280_load_firmware_dma(struct scsi_qla_host *ha)
  {

  	/* enter with host_lock acquired */

  	const struct firmware *fw;
  	const __le16 *fw_data;
  	uint16_t risc_address, risc_code_size;

  	uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
  	int err = 0, num, i;
  #if DUMP_IT_BACK
  	uint8_t *sp, *tbuf;
  	dma_addr_t p_tbuf;
  
  	tbuf = pci_alloc_consistent(ha->pdev, 8000, &p_tbuf);
  	if (!tbuf)
  		return -ENOMEM;
  #endif

  	fw = qla1280_request_firmware(ha);
  	if (IS_ERR(fw))
  		return PTR_ERR(fw);

  	fw_data = (const __le16 *)&fw->data[0];
  	ha->fwstart = __le16_to_cpu(fw_data[2]);

  	/* Load RISC code. */

  	risc_address = ha->fwstart;

  	fw_data = (const __le16 *)&fw->data[6];

  	risc_code_size = (fw->size - 6) / 2;

  
  	dprintk(1, "%s: DMA RISC code (%i) words
  ",

  			__func__, risc_code_size);

  
  	num = 0;
  	while (risc_code_size > 0) {
  		int warn __attribute__((unused)) = 0;
  
  		cnt = 2000 >> 1;
  
  		if (cnt > risc_code_size)
  			cnt = risc_code_size;
  
  		dprintk(2, "qla1280_setup_chip:  loading risc @ =(0x%p),"
  			"%d,%d(0x%x)
  ",

  			fw_data, cnt, num, risc_address);

  		for(i = 0; i < cnt; i++)

  			((__le16 *)ha->request_ring)[i] = fw_data[i];

  
  		mb[0] = MBC_LOAD_RAM;
  		mb[1] = risc_address;
  		mb[4] = cnt;
  		mb[3] = ha->request_dma & 0xffff;
  		mb[2] = (ha->request_dma >> 16) & 0xffff;
  		mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
  		mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
  		dprintk(2, "%s: op=%d  0x%p = 0x%4x,0x%4x,0x%4x,0x%4x
  ",

  				__func__, mb[0],

  				(void *)(long)ha->request_dma,
  				mb[6], mb[7], mb[2], mb[3]);
  		err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
  				BIT_1 | BIT_0, mb);
  		if (err) {
  			printk(KERN_ERR "scsi(%li): Failed to load partial "
  			       "segment of f
  ", ha->host_no);
  			goto out;
  		}
  
  #if DUMP_IT_BACK
  		mb[0] = MBC_DUMP_RAM;
  		mb[1] = risc_address;
  		mb[4] = cnt;
  		mb[3] = p_tbuf & 0xffff;
  		mb[2] = (p_tbuf >> 16) & 0xffff;
  		mb[7] = pci_dma_hi32(p_tbuf) & 0xffff;
  		mb[6] = pci_dma_hi32(p_tbuf) >> 16;
  
  		err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
  				BIT_1 | BIT_0, mb);
  		if (err) {
  			printk(KERN_ERR
  			       "Failed to dump partial segment of f/w
  ");
  			goto out;
  		}
  		sp = (uint8_t *)ha->request_ring;
  		for (i = 0; i < (cnt << 1); i++) {
  			if (tbuf[i] != sp[i] && warn++ < 10) {
  				printk(KERN_ERR "%s: FW compare error @ "
  						"byte(0x%x) loop#=%x
  ",

  						__func__, i, num);

  				printk(KERN_ERR "%s: FWbyte=%x  "
  						"FWfromChip=%x
  ",

  						__func__, sp[i], tbuf[i]);

  				/*break; */
  			}
  		}
  #endif
  		risc_address += cnt;
  		risc_code_size = risc_code_size - cnt;

  		fw_data = fw_data + cnt;

  		num++;
  	}
  
   out:
  #if DUMP_IT_BACK
  	pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
  #endif
  	return err;
  }
  
  static int
  qla1280_start_firmware(struct scsi_qla_host *ha)
  {
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	int err;
  
  	dprintk(1, "%s: Verifying checksum of loaded RISC code.
  ",

  			__func__);

  
  	/* Verify checksum of loaded RISC code. */
  	mb[0] = MBC_VERIFY_CHECKSUM;
  	/* mb[1] = ql12_risc_code_addr01; */

  	mb[1] = ha->fwstart;

  	err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
  	if (err) {

  		printk(KERN_ERR "scsi(%li): RISC checksum failed.
  ", ha->host_no);

  		return err;
  	}
  
  	/* Start firmware execution. */

  	dprintk(1, "%s: start firmware running.
  ", __func__);

  	mb[0] = MBC_EXECUTE_FIRMWARE;

  	mb[1] = ha->fwstart;

  	err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
  	if (err) {
  		printk(KERN_ERR "scsi(%li): Failed to start firmware
  ",
  				ha->host_no);
  	}
  
  	return err;
  }
  
  static int
  qla1280_load_firmware(struct scsi_qla_host *ha)
  {

  	/* enter with host_lock taken */

  	int err;

  
  	err = qla1280_chip_diag(ha);
  	if (err)
  		goto out;
  	if (IS_ISP1040(ha))
  		err = qla1280_load_firmware_pio(ha);
  	else
  		err = qla1280_load_firmware_dma(ha);
  	if (err)
  		goto out;
  	err = qla1280_start_firmware(ha);
   out:
  	return err;
  }
  
  /*
   * Initialize rings
   *
   * Input:
   *      ha                = adapter block pointer.
   *      ha->request_ring  = request ring virtual address
   *      ha->response_ring = response ring virtual address
   *      ha->request_dma   = request ring physical address
   *      ha->response_dma  = response ring physical address
   *
   * Returns:
   *      0 = success.
   */
  static int
  qla1280_init_rings(struct scsi_qla_host *ha)
  {
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	int status = 0;
  
  	ENTER("qla1280_init_rings");
  
  	/* Clear outstanding commands array. */
  	memset(ha->outstanding_cmds, 0,
  	       sizeof(struct srb *) * MAX_OUTSTANDING_COMMANDS);
  
  	/* Initialize request queue. */
  	ha->request_ring_ptr = ha->request_ring;
  	ha->req_ring_index = 0;
  	ha->req_q_cnt = REQUEST_ENTRY_CNT;
  	/* mb[0] = MBC_INIT_REQUEST_QUEUE; */
  	mb[0] = MBC_INIT_REQUEST_QUEUE_A64;
  	mb[1] = REQUEST_ENTRY_CNT;
  	mb[3] = ha->request_dma & 0xffff;
  	mb[2] = (ha->request_dma >> 16) & 0xffff;
  	mb[4] = 0;
  	mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
  	mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
  	if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 |
  					       BIT_3 | BIT_2 | BIT_1 | BIT_0,
  					       &mb[0]))) {
  		/* Initialize response queue. */
  		ha->response_ring_ptr = ha->response_ring;
  		ha->rsp_ring_index = 0;
  		/* mb[0] = MBC_INIT_RESPONSE_QUEUE; */
  		mb[0] = MBC_INIT_RESPONSE_QUEUE_A64;
  		mb[1] = RESPONSE_ENTRY_CNT;
  		mb[3] = ha->response_dma & 0xffff;
  		mb[2] = (ha->response_dma >> 16) & 0xffff;
  		mb[5] = 0;
  		mb[7] = pci_dma_hi32(ha->response_dma) & 0xffff;
  		mb[6] = pci_dma_hi32(ha->response_dma) >> 16;
  		status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 |
  						 BIT_3 | BIT_2 | BIT_1 | BIT_0,
  						 &mb[0]);
  	}
  
  	if (status)
  		dprintk(2, "qla1280_init_rings: **** FAILED ****
  ");
  
  	LEAVE("qla1280_init_rings");
  	return status;
  }
  
  static void
  qla1280_print_settings(struct nvram *nv)
  {
  	dprintk(1, "qla1280 : initiator scsi id bus[0]=%d
  ",
  		nv->bus[0].config_1.initiator_id);
  	dprintk(1, "qla1280 : initiator scsi id bus[1]=%d
  ",
  		nv->bus[1].config_1.initiator_id);
  
  	dprintk(1, "qla1280 : bus reset delay[0]=%d
  ",
  		nv->bus[0].bus_reset_delay);
  	dprintk(1, "qla1280 : bus reset delay[1]=%d
  ",
  		nv->bus[1].bus_reset_delay);
  
  	dprintk(1, "qla1280 : retry count[0]=%d
  ", nv->bus[0].retry_count);
  	dprintk(1, "qla1280 : retry delay[0]=%d
  ", nv->bus[0].retry_delay);
  	dprintk(1, "qla1280 : retry count[1]=%d
  ", nv->bus[1].retry_count);
  	dprintk(1, "qla1280 : retry delay[1]=%d
  ", nv->bus[1].retry_delay);
  
  	dprintk(1, "qla1280 : async data setup time[0]=%d
  ",
  		nv->bus[0].config_2.async_data_setup_time);
  	dprintk(1, "qla1280 : async data setup time[1]=%d
  ",
  		nv->bus[1].config_2.async_data_setup_time);
  
  	dprintk(1, "qla1280 : req/ack active negation[0]=%d
  ",
  		nv->bus[0].config_2.req_ack_active_negation);
  	dprintk(1, "qla1280 : req/ack active negation[1]=%d
  ",
  		nv->bus[1].config_2.req_ack_active_negation);
  
  	dprintk(1, "qla1280 : data line active negation[0]=%d
  ",
  		nv->bus[0].config_2.data_line_active_negation);
  	dprintk(1, "qla1280 : data line active negation[1]=%d
  ",
  		nv->bus[1].config_2.data_line_active_negation);
  
  	dprintk(1, "qla1280 : disable loading risc code=%d
  ",
  		nv->cntr_flags_1.disable_loading_risc_code);
  
  	dprintk(1, "qla1280 : enable 64bit addressing=%d
  ",
  		nv->cntr_flags_1.enable_64bit_addressing);
  
  	dprintk(1, "qla1280 : selection timeout limit[0]=%d
  ",
  		nv->bus[0].selection_timeout);
  	dprintk(1, "qla1280 : selection timeout limit[1]=%d
  ",
  		nv->bus[1].selection_timeout);
  
  	dprintk(1, "qla1280 : max queue depth[0]=%d
  ",
  		nv->bus[0].max_queue_depth);
  	dprintk(1, "qla1280 : max queue depth[1]=%d
  ",
  		nv->bus[1].max_queue_depth);
  }
  
  static void
  qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
  {
  	struct nvram *nv = &ha->nvram;

  	nv->bus[bus].target[target].parameter.renegotiate_on_error = 1;
  	nv->bus[bus].target[target].parameter.auto_request_sense = 1;
  	nv->bus[bus].target[target].parameter.tag_queuing = 1;
  	nv->bus[bus].target[target].parameter.enable_sync = 1;

  #if 1	/* Some SCSI Processors do not seem to like this */

  	nv->bus[bus].target[target].parameter.enable_wide = 1;

  #endif

  	nv->bus[bus].target[target].execution_throttle =
  		nv->bus[bus].max_queue_depth - 1;

  	nv->bus[bus].target[target].parameter.parity_checking = 1;
  	nv->bus[bus].target[target].parameter.disconnect_allowed = 1;

  
  	if (IS_ISP1x160(ha)) {
  		nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
  		nv->bus[bus].target[target].flags.flags1x160.sync_offset = 0x0e;
  		nv->bus[bus].target[target].sync_period = 9;
  		nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
  		nv->bus[bus].target[target].ppr_1x160.flags.ppr_options = 2;
  		nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width = 1;
  	} else {
  		nv->bus[bus].target[target].flags.flags1x80.device_enable = 1;
  		nv->bus[bus].target[target].flags.flags1x80.sync_offset = 12;
  		nv->bus[bus].target[target].sync_period = 10;
  	}
  }
  
  static void
  qla1280_set_defaults(struct scsi_qla_host *ha)
  {
  	struct nvram *nv = &ha->nvram;
  	int bus, target;
  
  	dprintk(1, "Using defaults for NVRAM: 
  ");
  	memset(nv, 0, sizeof(struct nvram));
  
  	/* nv->cntr_flags_1.disable_loading_risc_code = 1; */
  	nv->firmware_feature.f.enable_fast_posting = 1;
  	nv->firmware_feature.f.disable_synchronous_backoff = 1;

  	nv->termination.scsi_bus_0_control = 3;
  	nv->termination.scsi_bus_1_control = 3;
  	nv->termination.auto_term_support = 1;

  
  	/*
  	 * Set default FIFO magic - What appropriate values would be here
  	 * is unknown. This is what I have found testing with 12160s.
  	 *
  	 * Now, I would love the magic decoder ring for this one, the
  	 * header file provided by QLogic seems to be bogus or incomplete
  	 * at best.
  	 */

  	nv->isp_config.burst_enable = 1;
  	if (IS_ISP1040(ha))
  		nv->isp_config.fifo_threshold |= 3;
  	else
  		nv->isp_config.fifo_threshold |= 4;

  	if (IS_ISP1x160(ha))
  		nv->isp_parameter = 0x01; /* fast memory enable */
  
  	for (bus = 0; bus < MAX_BUSES; bus++) {
  		nv->bus[bus].config_1.initiator_id = 7;
  		nv->bus[bus].config_2.req_ack_active_negation = 1;
  		nv->bus[bus].config_2.data_line_active_negation = 1;
  		nv->bus[bus].selection_timeout = 250;

  		nv->bus[bus].max_queue_depth = 32;

  
  		if (IS_ISP1040(ha)) {
  			nv->bus[bus].bus_reset_delay = 3;
  			nv->bus[bus].config_2.async_data_setup_time = 6;
  			nv->bus[bus].retry_delay = 1;
  		} else {
  			nv->bus[bus].bus_reset_delay = 5;
  			nv->bus[bus].config_2.async_data_setup_time = 8;
  		}
  
  		for (target = 0; target < MAX_TARGETS; target++)
  			qla1280_set_target_defaults(ha, bus, target);
  	}
  }
  
  static int
  qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
  {
  	struct nvram *nv = &ha->nvram;
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	int status, lun;

  	uint16_t flag;

  
  	/* Set Target Parameters. */
  	mb[0] = MBC_SET_TARGET_PARAMETERS;

  	mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);

  
  	/*

  	 * Do not enable sync and ppr for the initial INQUIRY run. We
  	 * enable this later if we determine the target actually
  	 * supports it.

  	 */

  	mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE
  		 | TP_WIDE | TP_PARITY | TP_DISCONNECT);

  
  	if (IS_ISP1x160(ha))
  		mb[3] =	nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
  	else
  		mb[3] =	nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
  	mb[3] |= nv->bus[bus].target[target].sync_period;

  	status = qla1280_mailbox_command(ha, 0x0f, mb);

  
  	/* Save Tag queuing enable flag. */

  	flag = (BIT_0 << target);

  	if (nv->bus[bus].target[target].parameter.tag_queuing)
  		ha->bus_settings[bus].qtag_enables |= flag;

  
  	/* Save Device enable flag. */
  	if (IS_ISP1x160(ha)) {
  		if (nv->bus[bus].target[target].flags.flags1x160.device_enable)

  			ha->bus_settings[bus].device_enables |= flag;

  		ha->bus_settings[bus].lun_disables |= 0;
  	} else {
  		if (nv->bus[bus].target[target].flags.flags1x80.device_enable)

  			ha->bus_settings[bus].device_enables |= flag;

  		/* Save LUN disable flag. */
  		if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)

  			ha->bus_settings[bus].lun_disables |= flag;

  	}
  
  	/* Set Device Queue Parameters. */
  	for (lun = 0; lun < MAX_LUNS; lun++) {
  		mb[0] = MBC_SET_DEVICE_QUEUE;

  		mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
  		mb[1] |= lun;

  		mb[2] = nv->bus[bus].max_queue_depth;
  		mb[3] = nv->bus[bus].target[target].execution_throttle;

  		status |= qla1280_mailbox_command(ha, 0x0f, mb);

  	}
  
  	return status;
  }
  
  static int
  qla1280_config_bus(struct scsi_qla_host *ha, int bus)
  {
  	struct nvram *nv = &ha->nvram;
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	int target, status;
  
  	/* SCSI Reset Disable. */
  	ha->bus_settings[bus].disable_scsi_reset =
  		nv->bus[bus].config_1.scsi_reset_disable;
  
  	/* Initiator ID. */
  	ha->bus_settings[bus].id = nv->bus[bus].config_1.initiator_id;
  	mb[0] = MBC_SET_INITIATOR_ID;
  	mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 :
  		ha->bus_settings[bus].id;
  	status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
  
  	/* Reset Delay. */
  	ha->bus_settings[bus].bus_reset_delay =
  		nv->bus[bus].bus_reset_delay;
  
  	/* Command queue depth per device. */
  	ha->bus_settings[bus].hiwat = nv->bus[bus].max_queue_depth - 1;
  
  	/* Set target parameters. */
  	for (target = 0; target < MAX_TARGETS; target++)
  		status |= qla1280_config_target(ha, bus, target);
  
  	return status;
  }
  
  static int
  qla1280_nvram_config(struct scsi_qla_host *ha)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  	struct nvram *nv = &ha->nvram;
  	int bus, target, status = 0;
  	uint16_t mb[MAILBOX_REGISTER_COUNT];

  
  	ENTER("qla1280_nvram_config");
  
  	if (ha->nvram_valid) {
  		/* Always force AUTO sense for LINUX SCSI */
  		for (bus = 0; bus < MAX_BUSES; bus++)
  			for (target = 0; target < MAX_TARGETS; target++) {

  				nv->bus[bus].target[target].parameter.

  					auto_request_sense = 1;
  			}
  	} else {
  		qla1280_set_defaults(ha);
  	}
  
  	qla1280_print_settings(nv);
  
  	/* Disable RISC load of firmware. */
  	ha->flags.disable_risc_code_load =
  		nv->cntr_flags_1.disable_loading_risc_code;
  
  	if (IS_ISP1040(ha)) {
  		uint16_t hwrev, cfg1, cdma_conf, ddma_conf;
  
  		hwrev = RD_REG_WORD(&reg->cfg_0) & ISP_CFG0_HWMSK;

  		cfg1 = RD_REG_WORD(&reg->cfg_1) & ~(BIT_4 | BIT_5 | BIT_6);

  		cdma_conf = RD_REG_WORD(&reg->cdma_cfg);
  		ddma_conf = RD_REG_WORD(&reg->ddma_cfg);
  
  		/* Busted fifo, says mjacob. */

  		if (hwrev != ISP_CFG0_1040A)
  			cfg1 |= nv->isp_config.fifo_threshold << 4;
  
  		cfg1 |= nv->isp_config.burst_enable << 2;
  		WRT_REG_WORD(&reg->cfg_1, cfg1);

  
  		WRT_REG_WORD(&reg->cdma_cfg, cdma_conf | CDMA_CONF_BENAB);
  		WRT_REG_WORD(&reg->ddma_cfg, cdma_conf | DDMA_CONF_BENAB);
  	} else {

  		uint16_t cfg1, term;

  		/* Set ISP hardware DMA burst */

  		cfg1 = nv->isp_config.fifo_threshold << 4;
  		cfg1 |= nv->isp_config.burst_enable << 2;

  		/* Enable DMA arbitration on dual channel controllers */
  		if (ha->ports > 1)

  			cfg1 |= BIT_13;
  		WRT_REG_WORD(&reg->cfg_1, cfg1);

  
  		/* Set SCSI termination. */

  		WRT_REG_WORD(&reg->gpio_enable,
  			     BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);
  		term = nv->termination.scsi_bus_1_control;
  		term |= nv->termination.scsi_bus_0_control << 2;
  		term |= nv->termination.auto_term_support << 7;
  		RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  		WRT_REG_WORD(&reg->gpio_data, term);

  	}

  	RD_REG_WORD(&reg->id_l);	/* Flush PCI write */

  
  	/* ISP parameter word. */
  	mb[0] = MBC_SET_SYSTEM_PARAMETER;
  	mb[1] = nv->isp_parameter;
  	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
  
  	if (IS_ISP1x40(ha)) {
  		/* clock rate - for qla1240 and older, only */
  		mb[0] = MBC_SET_CLOCK_RATE;
  		mb[1] = 40;
  	 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
  	}
  
  	/* Firmware feature word. */
  	mb[0] = MBC_SET_FIRMWARE_FEATURES;

  	mb[1] = nv->firmware_feature.f.enable_fast_posting;
  	mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1;
  	mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5;

  #if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2)
  	if (ia64_platform_is("sn2")) {
  		printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
  		       "workaround
  ", ha->host_no);

  		mb[1] |= nv->firmware_feature.f.unused_9 << 9; /* XXX */

  	}
  #endif

  	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);

  
  	/* Retry count and delay. */
  	mb[0] = MBC_SET_RETRY_COUNT;
  	mb[1] = nv->bus[0].retry_count;
  	mb[2] = nv->bus[0].retry_delay;
  	mb[6] = nv->bus[1].retry_count;
  	mb[7] = nv->bus[1].retry_delay;
  	status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 |
  					  BIT_1 | BIT_0, &mb[0]);
  
  	/* ASYNC data setup time. */
  	mb[0] = MBC_SET_ASYNC_DATA_SETUP;
  	mb[1] = nv->bus[0].config_2.async_data_setup_time;
  	mb[2] = nv->bus[1].config_2.async_data_setup_time;
  	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
  
  	/* Active negation states. */
  	mb[0] = MBC_SET_ACTIVE_NEGATION;
  	mb[1] = 0;
  	if (nv->bus[0].config_2.req_ack_active_negation)
  		mb[1] |= BIT_5;
  	if (nv->bus[0].config_2.data_line_active_negation)
  		mb[1] |= BIT_4;
  	mb[2] = 0;
  	if (nv->bus[1].config_2.req_ack_active_negation)
  		mb[2] |= BIT_5;
  	if (nv->bus[1].config_2.data_line_active_negation)
  		mb[2] |= BIT_4;

  	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);

  
  	mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
  	mb[1] = 2;	/* Reset SCSI bus and return all outstanding IO */

  	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);

  
  	/* thingy */
  	mb[0] = MBC_SET_PCI_CONTROL;

  	mb[1] = BIT_1;	/* Data DMA Channel Burst Enable */
  	mb[2] = BIT_1;	/* Command DMA Channel Burst Enable */
  	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);

  
  	mb[0] = MBC_SET_TAG_AGE_LIMIT;
  	mb[1] = 8;

  	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);

  
  	/* Selection timeout. */
  	mb[0] = MBC_SET_SELECTION_TIMEOUT;
  	mb[1] = nv->bus[0].selection_timeout;
  	mb[2] = nv->bus[1].selection_timeout;

  	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);

  
  	for (bus = 0; bus < ha->ports; bus++)
  		status |= qla1280_config_bus(ha, bus);
  
  	if (status)
  		dprintk(2, "qla1280_nvram_config: **** FAILED ****
  ");
  
  	LEAVE("qla1280_nvram_config");
  	return status;
  }
  
  /*
   * Get NVRAM data word
   *      Calculates word position in NVRAM and calls request routine to
   *      get the word from NVRAM.
   *
   * Input:
   *      ha      = adapter block pointer.
   *      address = NVRAM word address.
   *
   * Returns:
   *      data word.
   */
  static uint16_t
  qla1280_get_nvram_word(struct scsi_qla_host *ha, uint32_t address)
  {
  	uint32_t nv_cmd;
  	uint16_t data;
  
  	nv_cmd = address << 16;
  	nv_cmd |= NV_READ_OP;
  
  	data = le16_to_cpu(qla1280_nvram_request(ha, nv_cmd));
  
  	dprintk(8, "qla1280_get_nvram_word: exiting normally NVRAM data = "
  		"0x%x", data);
  
  	return data;
  }
  
  /*
   * NVRAM request
   *      Sends read command to NVRAM and gets data from NVRAM.
   *
   * Input:
   *      ha     = adapter block pointer.
   *      nv_cmd = Bit 26     = start bit
   *               Bit 25, 24 = opcode
   *               Bit 23-16  = address
   *               Bit 15-0   = write data
   *
   * Returns:
   *      data word.
   */
  static uint16_t
  qla1280_nvram_request(struct scsi_qla_host *ha, uint32_t nv_cmd)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  	int cnt;
  	uint16_t data = 0;
  	uint16_t reg_data;
  
  	/* Send command to NVRAM. */
  
  	nv_cmd <<= 5;
  	for (cnt = 0; cnt < 11; cnt++) {
  		if (nv_cmd & BIT_31)
  			qla1280_nv_write(ha, NV_DATA_OUT);
  		else
  			qla1280_nv_write(ha, 0);
  		nv_cmd <<= 1;
  	}
  
  	/* Read data from NVRAM. */
  
  	for (cnt = 0; cnt < 16; cnt++) {
  		WRT_REG_WORD(&reg->nvram, (NV_SELECT | NV_CLOCK));
  		RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  		NVRAM_DELAY();
  		data <<= 1;
  		reg_data = RD_REG_WORD(&reg->nvram);
  		if (reg_data & NV_DATA_IN)
  			data |= BIT_0;
  		WRT_REG_WORD(&reg->nvram, NV_SELECT);
  		RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  		NVRAM_DELAY();
  	}
  
  	/* Deselect chip. */
  
  	WRT_REG_WORD(&reg->nvram, NV_DESELECT);
  	RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  	NVRAM_DELAY();
  
  	return data;
  }
  
  static void
  qla1280_nv_write(struct scsi_qla_host *ha, uint16_t data)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  
  	WRT_REG_WORD(&reg->nvram, data | NV_SELECT);
  	RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  	NVRAM_DELAY();
  	WRT_REG_WORD(&reg->nvram, data | NV_SELECT | NV_CLOCK);
  	RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  	NVRAM_DELAY();
  	WRT_REG_WORD(&reg->nvram, data | NV_SELECT);
  	RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  	NVRAM_DELAY();
  }
  
  /*
   * Mailbox Command
   *      Issue mailbox command and waits for completion.
   *
   * Input:
   *      ha = adapter block pointer.
   *      mr = mailbox registers to load.
   *      mb = data pointer for mailbox registers.
   *
   * Output:
   *      mb[MAILBOX_REGISTER_COUNT] = returned mailbox data.
   *
   * Returns:
   *      0 = success
   */
  static int
  qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
  {
  	struct device_reg __iomem *reg = ha->iobase;

  	int status = 0;
  	int cnt;
  	uint16_t *optr, *iptr;
  	uint16_t __iomem *mptr;
  	uint16_t data;

  	DECLARE_COMPLETION_ONSTACK(wait);

  	struct timer_list timer;
  
  	ENTER("qla1280_mailbox_command");
  
  	if (ha->mailbox_wait) {
  		printk(KERN_ERR "Warning mailbox wait already in use!
  ");
  	}
  	ha->mailbox_wait = &wait;
  
  	/*
  	 * We really should start out by verifying that the mailbox is
  	 * available before starting sending the command data
  	 */
  	/* Load mailbox registers. */
  	mptr = (uint16_t __iomem *) &reg->mailbox0;
  	iptr = mb;
  	for (cnt = 0; cnt < MAILBOX_REGISTER_COUNT; cnt++) {
  		if (mr & BIT_0) {
  			WRT_REG_WORD(mptr, (*iptr));
  		}
  
  		mr >>= 1;
  		mptr++;
  		iptr++;
  	}
  
  	/* Issue set host interrupt command. */
  
  	/* set up a timer just in case we're really jammed */
  	init_timer(&timer);
  	timer.expires = jiffies + 20*HZ;
  	timer.data = (unsigned long)ha;
  	timer.function = qla1280_mailbox_timeout;
  	add_timer(&timer);

  	spin_unlock_irq(ha->host->host_lock);

  	WRT_REG_WORD(&reg->host_cmd, HC_SET_HOST_INT);
  	data = qla1280_debounce_register(&reg->istatus);
  
  	wait_for_completion(&wait);
  	del_timer_sync(&timer);

  	spin_lock_irq(ha->host->host_lock);

  
  	ha->mailbox_wait = NULL;
  
  	/* Check for mailbox command timeout. */
  	if (ha->mailbox_out[0] != MBS_CMD_CMP) {
  		printk(KERN_WARNING "qla1280_mailbox_command: Command failed, "
  		       "mailbox0 = 0x%04x, mailbox_out0 = 0x%04x, istatus = "
  		       "0x%04x
  ", 
  		       mb[0], ha->mailbox_out[0], RD_REG_WORD(&reg->istatus));
  		printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x
  ",
  		       RD_REG_WORD(&reg->mailbox0), RD_REG_WORD(&reg->mailbox1),
  		       RD_REG_WORD(&reg->mailbox2), RD_REG_WORD(&reg->mailbox3));
  		printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x
  ",
  		       RD_REG_WORD(&reg->mailbox4), RD_REG_WORD(&reg->mailbox5),
  		       RD_REG_WORD(&reg->mailbox6), RD_REG_WORD(&reg->mailbox7));
  		status = 1;
  	}
  
  	/* Load return mailbox registers. */
  	optr = mb;
  	iptr = (uint16_t *) &ha->mailbox_out[0];
  	mr = MAILBOX_REGISTER_COUNT;
  	memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));

  	if (ha->flags.reset_marker)
  		qla1280_rst_aen(ha);

  	if (status)
  		dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
  			"0x%x ****
  ", mb[0]);
  
  	LEAVE("qla1280_mailbox_command");
  	return status;
  }
  
  /*
   * qla1280_poll
   *      Polls ISP for interrupts.
   *
   * Input:
   *      ha = adapter block pointer.
   */
  static void
  qla1280_poll(struct scsi_qla_host *ha)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  	uint16_t data;
  	LIST_HEAD(done_q);
  
  	/* ENTER("qla1280_poll"); */
  
  	/* Check for pending interrupts. */
  	data = RD_REG_WORD(&reg->istatus);
  	if (data & RISC_INT)
  		qla1280_isr(ha, &done_q);
  
  	if (!ha->mailbox_wait) {
  		if (ha->flags.reset_marker)
  			qla1280_rst_aen(ha);
  	}
  
  	if (!list_empty(&done_q))
  		qla1280_done(ha);
  
  	/* LEAVE("qla1280_poll"); */
  }
  
  /*
   * qla1280_bus_reset
   *      Issue SCSI bus reset.
   *
   * Input:
   *      ha  = adapter block pointer.
   *      bus = SCSI bus number.
   *
   * Returns:
   *      0 = success
   */
  static int
  qla1280_bus_reset(struct scsi_qla_host *ha, int bus)
  {
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	uint16_t reset_delay;
  	int status;
  
  	dprintk(3, "qla1280_bus_reset: entered
  ");
  
  	if (qla1280_verbose)
  		printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS
  ",
  		       ha->host_no, bus);
  
  	reset_delay = ha->bus_settings[bus].bus_reset_delay;
  	mb[0] = MBC_BUS_RESET;
  	mb[1] = reset_delay;
  	mb[2] = (uint16_t) bus;
  	status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
  
  	if (status) {
  		if (ha->bus_settings[bus].failed_reset_count > 2)
  			ha->bus_settings[bus].scsi_bus_dead = 1;
  		ha->bus_settings[bus].failed_reset_count++;
  	} else {

  		spin_unlock_irq(ha->host->host_lock);

  		ssleep(reset_delay);

  		spin_lock_irq(ha->host->host_lock);

  
  		ha->bus_settings[bus].scsi_bus_dead = 0;
  		ha->bus_settings[bus].failed_reset_count = 0;
  		ha->bus_settings[bus].reset_marker = 0;
  		/* Issue marker command. */
  		qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL);
  	}
  
  	/*
  	 * We should probably call qla1280_set_target_parameters()
  	 * here as well for all devices on the bus.
  	 */
  
  	if (status)
  		dprintk(2, "qla1280_bus_reset: **** FAILED ****
  ");
  	else
  		dprintk(3, "qla1280_bus_reset: exiting normally
  ");
  
  	return status;
  }
  
  /*
   * qla1280_device_reset
   *      Issue bus device reset message to the target.
   *
   * Input:
   *      ha      = adapter block pointer.
   *      bus     = SCSI BUS number.
   *      target  = SCSI ID.
   *
   * Returns:
   *      0 = success
   */
  static int
  qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
  {
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	int status;
  
  	ENTER("qla1280_device_reset");
  
  	mb[0] = MBC_ABORT_TARGET;
  	mb[1] = (bus ? (target | BIT_7) : target) << 8;
  	mb[2] = 1;
  	status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
  
  	/* Issue marker command. */
  	qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
  
  	if (status)
  		dprintk(2, "qla1280_device_reset: **** FAILED ****
  ");
  
  	LEAVE("qla1280_device_reset");
  	return status;
  }
  
  /*

   * qla1280_abort_command
   *      Abort command aborts a specified IOCB.
   *
   * Input:
   *      ha = adapter block pointer.
   *      sp = SB structure pointer.
   *
   * Returns:
   *      0 = success
   */
  static int
  qla1280_abort_command(struct scsi_qla_host *ha, struct srb * sp, int handle)
  {
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	unsigned int bus, target, lun;
  	int status;
  
  	ENTER("qla1280_abort_command");
  
  	bus = SCSI_BUS_32(sp->cmd);
  	target = SCSI_TCN_32(sp->cmd);
  	lun = SCSI_LUN_32(sp->cmd);
  
  	sp->flags |= SRB_ABORT_PENDING;
  
  	mb[0] = MBC_ABORT_COMMAND;
  	mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
  	mb[2] = handle >> 16;
  	mb[3] = handle & 0xffff;
  	status = qla1280_mailbox_command(ha, 0x0f, &mb[0]);
  
  	if (status) {
  		dprintk(2, "qla1280_abort_command: **** FAILED ****
  ");
  		sp->flags &= ~SRB_ABORT_PENDING;
  	}
  
  
  	LEAVE("qla1280_abort_command");
  	return status;
  }
  
  /*
   * qla1280_reset_adapter
   *      Reset adapter.
   *
   * Input:
   *      ha = adapter block pointer.
   */
  static void
  qla1280_reset_adapter(struct scsi_qla_host *ha)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  
  	ENTER("qla1280_reset_adapter");
  
  	/* Disable ISP chip */
  	ha->flags.online = 0;
  	WRT_REG_WORD(&reg->ictrl, ISP_RESET);
  	WRT_REG_WORD(&reg->host_cmd,
  		     HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS);
  	RD_REG_WORD(&reg->id_l);	/* Flush PCI write */
  
  	LEAVE("qla1280_reset_adapter");
  }
  
  /*
   *  Issue marker command.
   *      Function issues marker IOCB.
   *
   * Input:
   *      ha   = adapter block pointer.
   *      bus  = SCSI BUS number
   *      id   = SCSI ID
   *      lun  = SCSI LUN
   *      type = marker modifier
   */
  static void
  qla1280_marker(struct scsi_qla_host *ha, int bus, int id, int lun, u8 type)
  {
  	struct mrk_entry *pkt;
  
  	ENTER("qla1280_marker");
  
  	/* Get request packet. */
  	if ((pkt = (struct mrk_entry *) qla1280_req_pkt(ha))) {
  		pkt->entry_type = MARKER_TYPE;
  		pkt->lun = (uint8_t) lun;
  		pkt->target = (uint8_t) (bus ? (id | BIT_7) : id);
  		pkt->modifier = type;
  		pkt->entry_status = 0;
  
  		/* Issue command to ISP */
  		qla1280_isp_cmd(ha);
  	}
  
  	LEAVE("qla1280_marker");
  }
  
  
  /*
   * qla1280_64bit_start_scsi
   *      The start SCSI is responsible for building request packets on
   *      request ring and modifying ISP input pointer.
   *
   * Input:
   *      ha = adapter block pointer.
   *      sp = SB structure pointer.
   *
   * Returns:
   *      0 = success, was able to issue command.
   */
  #ifdef QLA_64BIT_PTR
  static int
  qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  	struct scsi_cmnd *cmd = sp->cmd;
  	cmd_a64_entry_t *pkt;

  	__le32 *dword_ptr;

  	dma_addr_t dma_handle;
  	int status = 0;
  	int cnt;
  	int req_cnt;

  	int seg_cnt;

  	u8 dir;
  
  	ENTER("qla1280_64bit_start_scsi:");
  
  	/* Calculate number of entries and segments required. */
  	req_cnt = 1;

  	seg_cnt = scsi_dma_map(cmd);
  	if (seg_cnt > 0) {

  		if (seg_cnt > 2) {
  			req_cnt += (seg_cnt - 2) / 5;
  			if ((seg_cnt - 2) % 5)
  				req_cnt++;
  		}

  	} else if (seg_cnt < 0) {
  		status = 1;
  		goto out;

  	}
  
  	if ((req_cnt + 2) >= ha->req_q_cnt) {
  		/* Calculate number of free request entries. */
  		cnt = RD_REG_WORD(&reg->mailbox4);
  		if (ha->req_ring_index < cnt)
  			ha->req_q_cnt = cnt - ha->req_ring_index;
  		else
  			ha->req_q_cnt =
  				REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
  	}

  	dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x
  ",
  		ha->req_q_cnt, seg_cnt);

  	/* If room for request in request ring. */
  	if ((req_cnt + 2) >= ha->req_q_cnt) {

  		status = SCSI_MLQUEUE_HOST_BUSY;

  		dprintk(2, "qla1280_start_scsi: in-ptr=0x%x  req_q_cnt="

  			"0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
  			req_cnt);
  		goto out;
  	}
  
  	/* Check for room in outstanding command list. */
  	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&

  		     ha->outstanding_cmds[cnt] != NULL; cnt++);

  
  	if (cnt >= MAX_OUTSTANDING_COMMANDS) {

  		status = SCSI_MLQUEUE_HOST_BUSY;

  		dprintk(2, "qla1280_start_scsi: NO ROOM IN "

  			"OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
  		goto out;
  	}
  
  	ha->outstanding_cmds[cnt] = sp;
  	ha->req_q_cnt -= req_cnt;
  	CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1);

  	dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx
  ", cmd, sp,

  		cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
  	dprintk(2, "             bus %i, target %i, lun %i
  ",
  		SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
  	qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);
  
  	/*
  	 * Build command packet.
  	 */
  	pkt = (cmd_a64_entry_t *) ha->request_ring_ptr;
  
  	pkt->entry_type = COMMAND_A64_TYPE;
  	pkt->entry_count = (uint8_t) req_cnt;
  	pkt->sys_define = (uint8_t) ha->req_ring_index;
  	pkt->entry_status = 0;
  	pkt->handle = cpu_to_le32(cnt);
  
  	/* Zero out remaining portion of packet. */
  	memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
  
  	/* Set ISP command timeout. */

  	pkt->timeout = cpu_to_le16(cmd->request->timeout/HZ);

  
  	/* Set device target ID and LUN */
  	pkt->lun = SCSI_LUN_32(cmd);
  	pkt->target = SCSI_BUS_32(cmd) ?
  		(SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
  
  	/* Enable simple tag queuing if device supports it. */

  	if (cmd->device->simple_tags)

  		pkt->control_flags |= cpu_to_le16(BIT_3);
  
  	/* Load SCSI command packet. */
  	pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));

  	memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));

  	/* dprintk(1, "Build packet for command[0]=0x%x
  ",pkt->scsi_cdb[0]); */
  
  	/* Set transfer direction. */
  	dir = qla1280_data_direction(cmd);
  	pkt->control_flags |= cpu_to_le16(dir);
  
  	/* Set total data segment count. */
  	pkt->dseg_count = cpu_to_le16(seg_cnt);
  
  	/*
  	 * Load data segments.
  	 */
  	if (seg_cnt) {	/* If data transfer. */

  		struct scatterlist *sg, *s;

  		int remseg = seg_cnt;

  
  		sg = scsi_sglist(cmd);

  		/* Setup packet address segment pointer. */
  		dword_ptr = (u32 *)&pkt->dseg_0_address;

  		/* Load command entry data segments. */
  		for_each_sg(sg, s, seg_cnt, cnt) {
  			if (cnt == 2)
  				break;
  
  			dma_handle = sg_dma_address(s);
  #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
  			if (ha->flags.use_pci_vchannel)
  				sn_pci_set_vchan(ha->pdev,
  						 (unsigned long *)&dma_handle,
  						 SCSI_BUS_32(cmd));
  #endif
  			*dword_ptr++ =
  				cpu_to_le32(pci_dma_lo32(dma_handle));
  			*dword_ptr++ =
  				cpu_to_le32(pci_dma_hi32(dma_handle));
  			*dword_ptr++ = cpu_to_le32(sg_dma_len(s));
  			dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x
  ",
  				cpu_to_le32(pci_dma_hi32(dma_handle)),
  				cpu_to_le32(pci_dma_lo32(dma_handle)),
  				cpu_to_le32(sg_dma_len(sg_next(s))));
  			remseg--;
  		}
  		dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
  			"command packet data - b %i, t %i, l %i 
  ",
  			SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
  			SCSI_LUN_32(cmd));
  		qla1280_dump_buffer(5, (char *)pkt,
  				    REQUEST_ENTRY_SIZE);
  
  		/*
  		 * Build continuation packets.
  		 */
  		dprintk(3, "S/G Building Continuation...seg_cnt=0x%x "
  			"remains
  ", seg_cnt);
  
  		while (remseg > 0) {
  			/* Update sg start */
  			sg = s;
  			/* Adjust ring index. */
  			ha->req_ring_index++;
  			if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
  				ha->req_ring_index = 0;
  				ha->request_ring_ptr =
  					ha->request_ring;
  			} else
  				ha->request_ring_ptr++;
  
  			pkt = (cmd_a64_entry_t *)ha->request_ring_ptr;
  
  			/* Zero out packet. */
  			memset(pkt, 0, REQUEST_ENTRY_SIZE);
  
  			/* Load packet defaults. */
  			((struct cont_a64_entry *) pkt)->entry_type =
  				CONTINUE_A64_TYPE;
  			((struct cont_a64_entry *) pkt)->entry_count = 1;
  			((struct cont_a64_entry *) pkt)->sys_define =
  				(uint8_t)ha->req_ring_index;
  			/* Setup packet address segment pointer. */
  			dword_ptr =
  				(u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address;
  
  			/* Load continuation entry data segments. */
  			for_each_sg(sg, s, remseg, cnt) {
  				if (cnt == 5)

  					break;
  				dma_handle = sg_dma_address(s);

  #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
  				if (ha->flags.use_pci_vchannel)
  					sn_pci_set_vchan(ha->pdev,

  							 (unsigned long *)&dma_handle,

  							 SCSI_BUS_32(cmd));
  #endif
  				*dword_ptr++ =
  					cpu_to_le32(pci_dma_lo32(dma_handle));
  				*dword_ptr++ =
  					cpu_to_le32(pci_dma_hi32(dma_handle));

  				*dword_ptr++ =
  					cpu_to_le32(sg_dma_len(s));
  				dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x
  ",

  					cpu_to_le32(pci_dma_hi32(dma_handle)),
  					cpu_to_le32(pci_dma_lo32(dma_handle)),

  					cpu_to_le32(sg_dma_len(s)));

  			}

  			remseg -= cnt;
  			dprintk(5, "qla1280_64bit_start_scsi: "
  				"continuation packet data - b %i, t "
  				"%i, l %i 
  ", SCSI_BUS_32(cmd),
  				SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));

  			qla1280_dump_buffer(5, (char *)pkt,
  					    REQUEST_ENTRY_SIZE);
  		}
  	} else {	/* No data transfer */
  		dprintk(5, "qla1280_64bit_start_scsi: No data, command "
  			"packet data - b %i, t %i, l %i 
  ",
  			SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
  		qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
  	}
  	/* Adjust ring index. */
  	ha->req_ring_index++;
  	if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
  		ha->req_ring_index = 0;
  		ha->request_ring_ptr = ha->request_ring;
  	} else
  		ha->request_ring_ptr++;
  
  	/* Set chip new ring index. */
  	dprintk(2,
  		"qla1280_64bit_start_scsi: Wakeup RISC for pending command
  ");
  	sp->flags |= SRB_SENT;
  	ha->actthreads++;
  	WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
  	/* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */
  	mmiowb();
  
   out:
  	if (status)
  		dprintk(2, "qla1280_64bit_start_scsi: **** FAILED ****
  ");
  	else
  		dprintk(3, "qla1280_64bit_start_scsi: exiting normally
  ");
  
  	return status;
  }
  #else /* !QLA_64BIT_PTR */
  
  /*
   * qla1280_32bit_start_scsi
   *      The start SCSI is responsible for building request packets on
   *      request ring and modifying ISP input pointer.
   *
   *      The Qlogic firmware interface allows every queue slot to have a SCSI
   *      command and up to 4 scatter/gather (SG) entries.  If we need more
   *      than 4 SG entries, then continuation entries are used that can
   *      hold another 7 entries each.  The start routine determines if there
   *      is eought empty slots then build the combination of requests to
   *      fulfill the OS request.
   *
   * Input:
   *      ha = adapter block pointer.
   *      sp = SCSI Request Block structure pointer.
   *
   * Returns:
   *      0 = success, was able to issue command.
   */
  static int
  qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  	struct scsi_cmnd *cmd = sp->cmd;
  	struct cmd_entry *pkt;

  	__le32 *dword_ptr;

  	int status = 0;
  	int cnt;
  	int req_cnt;

  	int seg_cnt;

  	u8 dir;
  
  	ENTER("qla1280_32bit_start_scsi");
  
  	dprintk(1, "32bit_start: cmd=%p sp=%p CDB=%x
  ", cmd, sp,
  		cmd->cmnd[0]);
  
  	/* Calculate number of entries and segments required. */

  	req_cnt = 1;

  	seg_cnt = scsi_dma_map(cmd);
  	if (seg_cnt) {

  		/*
  		 * if greater than four sg entries then we need to allocate
  		 * continuation entries
  		 */
  		if (seg_cnt > 4) {
  			req_cnt += (seg_cnt - 4) / 7;
  			if ((seg_cnt - 4) % 7)
  				req_cnt++;
  		}
  		dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x
  ",
  			cmd, seg_cnt, req_cnt);

  	} else if (seg_cnt < 0) {
  		status = 1;
  		goto out;

  	}
  
  	if ((req_cnt + 2) >= ha->req_q_cnt) {
  		/* Calculate number of free request entries. */
  		cnt = RD_REG_WORD(&reg->mailbox4);
  		if (ha->req_ring_index < cnt)
  			ha->req_q_cnt = cnt - ha->req_ring_index;
  		else
  			ha->req_q_cnt =
  				REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
  	}
  
  	dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x
  ",
  		ha->req_q_cnt, seg_cnt);
  	/* If room for request in request ring. */
  	if ((req_cnt + 2) >= ha->req_q_cnt) {

  		status = SCSI_MLQUEUE_HOST_BUSY;

  		dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
  			"req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
  			ha->req_q_cnt, req_cnt);
  		goto out;
  	}
  
  	/* Check for empty slot in outstanding command list. */
  	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
  		     (ha->outstanding_cmds[cnt] != 0); cnt++) ;
  
  	if (cnt >= MAX_OUTSTANDING_COMMANDS) {

  		status = SCSI_MLQUEUE_HOST_BUSY;

  		dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
  			"ARRAY, req_q_cnt=0x%x
  ", ha->req_q_cnt);
  		goto out;
  	}
  
  	CMD_HANDLE(sp->cmd) = (unsigned char *) (unsigned long)(cnt + 1);
  	ha->outstanding_cmds[cnt] = sp;
  	ha->req_q_cnt -= req_cnt;
  
  	/*
  	 * Build command packet.
  	 */
  	pkt = (struct cmd_entry *) ha->request_ring_ptr;
  
  	pkt->entry_type = COMMAND_TYPE;
  	pkt->entry_count = (uint8_t) req_cnt;
  	pkt->sys_define = (uint8_t) ha->req_ring_index;
  	pkt->entry_status = 0;
  	pkt->handle = cpu_to_le32(cnt);
  
  	/* Zero out remaining portion of packet. */
  	memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
  
  	/* Set ISP command timeout. */

  	pkt->timeout = cpu_to_le16(cmd->request->timeout/HZ);

  
  	/* Set device target ID and LUN */
  	pkt->lun = SCSI_LUN_32(cmd);
  	pkt->target = SCSI_BUS_32(cmd) ?
  		(SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
  
  	/* Enable simple tag queuing if device supports it. */

  	if (cmd->device->simple_tags)

  		pkt->control_flags |= cpu_to_le16(BIT_3);
  
  	/* Load SCSI command packet. */
  	pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));

  	memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));

  
  	/*dprintk(1, "Build packet for command[0]=0x%x
  ",pkt->scsi_cdb[0]); */
  	/* Set transfer direction. */
  	dir = qla1280_data_direction(cmd);
  	pkt->control_flags |= cpu_to_le16(dir);
  
  	/* Set total data segment count. */
  	pkt->dseg_count = cpu_to_le16(seg_cnt);
  
  	/*
  	 * Load data segments.
  	 */
  	if (seg_cnt) {

  		struct scatterlist *sg, *s;

  		int remseg = seg_cnt;

  
  		sg = scsi_sglist(cmd);

  		/* Setup packet address segment pointer. */
  		dword_ptr = &pkt->dseg_0_address;

  		dprintk(3, "Building S/G data segments..
  ");
  		qla1280_dump_buffer(1, (char *)sg, 4 * 16);
  
  		/* Load command entry data segments. */
  		for_each_sg(sg, s, seg_cnt, cnt) {
  			if (cnt == 4)
  				break;
  			*dword_ptr++ =
  				cpu_to_le32(pci_dma_lo32(sg_dma_address(s)));
  			*dword_ptr++ = cpu_to_le32(sg_dma_len(s));
  			dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x
  ",
  				(pci_dma_lo32(sg_dma_address(s))),
  				(sg_dma_len(s)));
  			remseg--;
  		}
  		/*
  		 * Build continuation packets.
  		 */
  		dprintk(3, "S/G Building Continuation"
  			"...seg_cnt=0x%x remains
  ", seg_cnt);
  		while (remseg > 0) {
  			/* Continue from end point */
  			sg = s;
  			/* Adjust ring index. */
  			ha->req_ring_index++;
  			if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
  				ha->req_ring_index = 0;
  				ha->request_ring_ptr =
  					ha->request_ring;
  			} else
  				ha->request_ring_ptr++;
  
  			pkt = (struct cmd_entry *)ha->request_ring_ptr;
  
  			/* Zero out packet. */
  			memset(pkt, 0, REQUEST_ENTRY_SIZE);
  
  			/* Load packet defaults. */
  			((struct cont_entry *) pkt)->
  				entry_type = CONTINUE_TYPE;
  			((struct cont_entry *) pkt)->entry_count = 1;
  
  			((struct cont_entry *) pkt)->sys_define =
  				(uint8_t) ha->req_ring_index;

  			/* Setup packet address segment pointer. */
  			dword_ptr =
  				&((struct cont_entry *) pkt)->dseg_0_address;
  
  			/* Load continuation entry data segments. */
  			for_each_sg(sg, s, remseg, cnt) {
  				if (cnt == 7)

  					break;

  				*dword_ptr++ =

  					cpu_to_le32(pci_dma_lo32(sg_dma_address(s)));

  				*dword_ptr++ =
  					cpu_to_le32(sg_dma_len(s));
  				dprintk(1,
  					"S/G Segment Cont. phys_addr=0x%x, "
  					"len=0x%x
  ",
  					cpu_to_le32(pci_dma_lo32(sg_dma_address(s))),
  					cpu_to_le32(sg_dma_len(s)));

  			}

  			remseg -= cnt;
  			dprintk(5, "qla1280_32bit_start_scsi: "
  				"continuation packet data - "
  				"scsi(%i:%i:%i)
  ", SCSI_BUS_32(cmd),
  				SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
  			qla1280_dump_buffer(5, (char *)pkt,
  					    REQUEST_ENTRY_SIZE);

  		}
  	} else {	/* No data transfer at all */
  		dprintk(5, "qla1280_32bit_start_scsi: No data, command "
  			"packet data - 
  ");
  		qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
  	}
  	dprintk(5, "qla1280_32bit_start_scsi: First IOCB block:
  ");
  	qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
  			    REQUEST_ENTRY_SIZE);
  
  	/* Adjust ring index. */
  	ha->req_ring_index++;
  	if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
  		ha->req_ring_index = 0;
  		ha->request_ring_ptr = ha->request_ring;
  	} else
  		ha->request_ring_ptr++;
  
  	/* Set chip new ring index. */
  	dprintk(2, "qla1280_32bit_start_scsi: Wakeup RISC "
  		"for pending command
  ");
  	sp->flags |= SRB_SENT;
  	ha->actthreads++;
  	WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
  	/* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */
  	mmiowb();
  
  out:
  	if (status)
  		dprintk(2, "qla1280_32bit_start_scsi: **** FAILED ****
  ");
  
  	LEAVE("qla1280_32bit_start_scsi");
  
  	return status;
  }
  #endif
  
  /*
   * qla1280_req_pkt
   *      Function is responsible for locking ring and
   *      getting a zeroed out request packet.
   *
   * Input:
   *      ha  = adapter block pointer.
   *
   * Returns:
   *      0 = failed to get slot.
   */
  static request_t *
  qla1280_req_pkt(struct scsi_qla_host *ha)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  	request_t *pkt = NULL;
  	int cnt;
  	uint32_t timer;
  
  	ENTER("qla1280_req_pkt");
  
  	/*
  	 * This can be called from interrupt context, damn it!!!
  	 */
  	/* Wait for 30 seconds for slot. */
  	for (timer = 15000000; timer; timer--) {
  		if (ha->req_q_cnt > 0) {
  			/* Calculate number of free request entries. */
  			cnt = RD_REG_WORD(&reg->mailbox4);
  			if (ha->req_ring_index < cnt)
  				ha->req_q_cnt = cnt - ha->req_ring_index;
  			else
  				ha->req_q_cnt =
  					REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
  		}
  
  		/* Found empty request ring slot? */
  		if (ha->req_q_cnt > 0) {
  			ha->req_q_cnt--;
  			pkt = ha->request_ring_ptr;
  
  			/* Zero out packet. */
  			memset(pkt, 0, REQUEST_ENTRY_SIZE);
  
  			/*
  			 * How can this be right when we have a ring
  			 * size of 512???
  			 */
  			/* Set system defined field. */
  			pkt->sys_define = (uint8_t) ha->req_ring_index;
  
  			/* Set entry count. */
  			pkt->entry_count = 1;
  
  			break;
  		}
  
  		udelay(2);	/* 10 */
  
  		/* Check for pending interrupts. */
  		qla1280_poll(ha);
  	}
  
  	if (!pkt)
  		dprintk(2, "qla1280_req_pkt: **** FAILED ****
  ");
  	else
  		dprintk(3, "qla1280_req_pkt: exiting normally
  ");
  
  	return pkt;
  }
  
  /*
   * qla1280_isp_cmd
   *      Function is responsible for modifying ISP input pointer.
   *      Releases ring lock.
   *
   * Input:
   *      ha  = adapter block pointer.
   */
  static void
  qla1280_isp_cmd(struct scsi_qla_host *ha)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  
  	ENTER("qla1280_isp_cmd");
  
  	dprintk(5, "qla1280_isp_cmd: IOCB data:
  ");
  	qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
  			    REQUEST_ENTRY_SIZE);
  
  	/* Adjust ring index. */
  	ha->req_ring_index++;
  	if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
  		ha->req_ring_index = 0;
  		ha->request_ring_ptr = ha->request_ring;
  	} else
  		ha->request_ring_ptr++;
  
  	/*
  	 * Update request index to mailbox4 (Request Queue In).
  	 * The mmiowb() ensures that this write is ordered with writes by other
  	 * CPUs.  Without the mmiowb(), it is possible for the following:
  	 *    CPUA posts write of index 5 to mailbox4
  	 *    CPUA releases host lock
  	 *    CPUB acquires host lock
  	 *    CPUB posts write of index 6 to mailbox4
  	 *    On PCI bus, order reverses and write of 6 posts, then index 5,
  	 *       causing chip to issue full queue of stale commands
  	 * The mmiowb() prevents future writes from crossing the barrier.
  	 * See Documentation/DocBook/deviceiobook.tmpl for more information.
  	 */
  	WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
  	mmiowb();
  
  	LEAVE("qla1280_isp_cmd");
  }
  
  /****************************************************************************/
  /*                        Interrupt Service Routine.                        */
  /****************************************************************************/
  
  /****************************************************************************
   *  qla1280_isr
   *      Calls I/O done on command completion.
   *
   * Input:
   *      ha           = adapter block pointer.
   *      done_q       = done queue.
   ****************************************************************************/
  static void
  qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  	struct response *pkt;
  	struct srb *sp = NULL;
  	uint16_t mailbox[MAILBOX_REGISTER_COUNT];
  	uint16_t *wptr;
  	uint32_t index;
  	u16 istatus;
  
  	ENTER("qla1280_isr");
  
  	istatus = RD_REG_WORD(&reg->istatus);
  	if (!(istatus & (RISC_INT | PCI_INT)))
  		return;
  
  	/* Save mailbox register 5 */
  	mailbox[5] = RD_REG_WORD(&reg->mailbox5);
  
  	/* Check for mailbox interrupt. */
  
  	mailbox[0] = RD_REG_WORD_dmasync(&reg->semaphore);
  
  	if (mailbox[0] & BIT_0) {
  		/* Get mailbox data. */
  		/* dprintk(1, "qla1280_isr: In Get mailbox data 
  "); */
  
  		wptr = &mailbox[0];
  		*wptr++ = RD_REG_WORD(&reg->mailbox0);
  		*wptr++ = RD_REG_WORD(&reg->mailbox1);
  		*wptr = RD_REG_WORD(&reg->mailbox2);
  		if (mailbox[0] != MBA_SCSI_COMPLETION) {
  			wptr++;
  			*wptr++ = RD_REG_WORD(&reg->mailbox3);
  			*wptr++ = RD_REG_WORD(&reg->mailbox4);
  			wptr++;
  			*wptr++ = RD_REG_WORD(&reg->mailbox6);
  			*wptr = RD_REG_WORD(&reg->mailbox7);
  		}
  
  		/* Release mailbox registers. */
  
  		WRT_REG_WORD(&reg->semaphore, 0);
  		WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
  
  		dprintk(5, "qla1280_isr: mailbox interrupt mailbox[0] = 0x%x",
  			mailbox[0]);
  
  		/* Handle asynchronous event */
  		switch (mailbox[0]) {
  		case MBA_SCSI_COMPLETION:	/* Response completion */
  			dprintk(5, "qla1280_isr: mailbox SCSI response "
  				"completion
  ");
  
  			if (ha->flags.online) {
  				/* Get outstanding command index. */
  				index = mailbox[2] << 16 | mailbox[1];
  
  				/* Validate handle. */
  				if (index < MAX_OUTSTANDING_COMMANDS)
  					sp = ha->outstanding_cmds[index];
  				else
  					sp = NULL;
  
  				if (sp) {
  					/* Free outstanding command slot. */
  					ha->outstanding_cmds[index] = NULL;
  
  					/* Save ISP completion status */
  					CMD_RESULT(sp->cmd) = 0;

  					CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;

  
  					/* Place block on done queue */
  					list_add_tail(&sp->list, done_q);
  				} else {
  					/*
  					 * If we get here we have a real problem!
  					 */
  					printk(KERN_WARNING

  					       "qla1280: ISP invalid handle
  ");

  				}
  			}
  			break;
  
  		case MBA_BUS_RESET:	/* SCSI Bus Reset */
  			ha->flags.reset_marker = 1;
  			index = mailbox[6] & BIT_0;
  			ha->bus_settings[index].reset_marker = 1;
  
  			printk(KERN_DEBUG "qla1280_isr(): index %i "
  			       "asynchronous BUS_RESET
  ", index);
  			break;
  
  		case MBA_SYSTEM_ERR:	/* System Error */
  			printk(KERN_WARNING
  			       "qla1280: ISP System Error - mbx1=%xh, mbx2="
  			       "%xh, mbx3=%xh
  ", mailbox[1], mailbox[2],
  			       mailbox[3]);
  			break;
  
  		case MBA_REQ_TRANSFER_ERR:	/* Request Transfer Error */
  			printk(KERN_WARNING
  			       "qla1280: ISP Request Transfer Error
  ");
  			break;
  
  		case MBA_RSP_TRANSFER_ERR:	/* Response Transfer Error */
  			printk(KERN_WARNING
  			       "qla1280: ISP Response Transfer Error
  ");
  			break;
  
  		case MBA_WAKEUP_THRES:	/* Request Queue Wake-up */
  			dprintk(2, "qla1280_isr: asynchronous WAKEUP_THRES
  ");
  			break;
  
  		case MBA_TIMEOUT_RESET:	/* Execution Timeout Reset */
  			dprintk(2,
  				"qla1280_isr: asynchronous TIMEOUT_RESET
  ");
  			break;
  
  		case MBA_DEVICE_RESET:	/* Bus Device Reset */
  			printk(KERN_INFO "qla1280_isr(): asynchronous "
  			       "BUS_DEVICE_RESET
  ");
  
  			ha->flags.reset_marker = 1;
  			index = mailbox[6] & BIT_0;
  			ha->bus_settings[index].reset_marker = 1;
  			break;
  
  		case MBA_BUS_MODE_CHANGE:
  			dprintk(2,
  				"qla1280_isr: asynchronous BUS_MODE_CHANGE
  ");
  			break;
  
  		default:
  			/* dprintk(1, "qla1280_isr: default case of switch MB 
  "); */
  			if (mailbox[0] < MBA_ASYNC_EVENT) {
  				wptr = &mailbox[0];
  				memcpy((uint16_t *) ha->mailbox_out, wptr,
  				       MAILBOX_REGISTER_COUNT *
  				       sizeof(uint16_t));
  
  				if(ha->mailbox_wait != NULL)
  					complete(ha->mailbox_wait);
  			}
  			break;
  		}
  	} else {
  		WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
  	}
  
  	/*
  	 * We will receive interrupts during mailbox testing prior to
  	 * the card being marked online, hence the double check.
  	 */
  	if (!(ha->flags.online && !ha->mailbox_wait)) {
  		dprintk(2, "qla1280_isr: Response pointer Error
  ");
  		goto out;
  	}
  
  	if (mailbox[5] >= RESPONSE_ENTRY_CNT)
  		goto out;
  
  	while (ha->rsp_ring_index != mailbox[5]) {
  		pkt = ha->response_ring_ptr;
  
  		dprintk(5, "qla1280_isr: ha->rsp_ring_index = 0x%x, mailbox[5]"
  			" = 0x%x
  ", ha->rsp_ring_index, mailbox[5]);
  		dprintk(5,"qla1280_isr: response packet data
  ");
  		qla1280_dump_buffer(5, (char *)pkt, RESPONSE_ENTRY_SIZE);
  
  		if (pkt->entry_type == STATUS_TYPE) {
  			if ((le16_to_cpu(pkt->scsi_status) & 0xff)
  			    || pkt->comp_status || pkt->entry_status) {
  				dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
  					"0x%x mailbox[5] = 0x%x, comp_status "
  					"= 0x%x, scsi_status = 0x%x
  ",
  					ha->rsp_ring_index, mailbox[5],
  					le16_to_cpu(pkt->comp_status),
  					le16_to_cpu(pkt->scsi_status));
  			}
  		} else {
  			dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
  				"0x%x, mailbox[5] = 0x%x
  ",
  				ha->rsp_ring_index, mailbox[5]);
  			dprintk(2, "qla1280_isr: response packet data
  ");
  			qla1280_dump_buffer(2, (char *)pkt,
  					    RESPONSE_ENTRY_SIZE);
  		}
  
  		if (pkt->entry_type == STATUS_TYPE || pkt->entry_status) {
  			dprintk(2, "status: Cmd %p, handle %i
  ",
  				ha->outstanding_cmds[pkt->handle]->cmd,
  				pkt->handle);
  			if (pkt->entry_type == STATUS_TYPE)
  				qla1280_status_entry(ha, pkt, done_q);
  			else
  				qla1280_error_entry(ha, pkt, done_q);
  			/* Adjust ring index. */
  			ha->rsp_ring_index++;
  			if (ha->rsp_ring_index == RESPONSE_ENTRY_CNT) {
  				ha->rsp_ring_index = 0;
  				ha->response_ring_ptr =	ha->response_ring;
  			} else
  				ha->response_ring_ptr++;
  			WRT_REG_WORD(&reg->mailbox5, ha->rsp_ring_index);
  		}
  	}
  	
   out:
  	LEAVE("qla1280_isr");
  }
  
  /*
   *  qla1280_rst_aen
   *      Processes asynchronous reset.
   *
   * Input:
   *      ha  = adapter block pointer.
   */
  static void
  qla1280_rst_aen(struct scsi_qla_host *ha)
  {
  	uint8_t bus;
  
  	ENTER("qla1280_rst_aen");
  
  	if (ha->flags.online && !ha->flags.reset_active &&
  	    !ha->flags.abort_isp_active) {
  		ha->flags.reset_active = 1;
  		while (ha->flags.reset_marker) {
  			/* Issue marker command. */
  			ha->flags.reset_marker = 0;
  			for (bus = 0; bus < ha->ports &&
  				     !ha->flags.reset_marker; bus++) {
  				if (ha->bus_settings[bus].reset_marker) {
  					ha->bus_settings[bus].reset_marker = 0;
  					qla1280_marker(ha, bus, 0, 0,
  						       MK_SYNC_ALL);
  				}
  			}
  		}
  	}
  
  	LEAVE("qla1280_rst_aen");
  }

  /*
   *  qla1280_status_entry
   *      Processes received ISP status entry.
   *
   * Input:
   *      ha           = adapter block pointer.
   *      pkt          = entry pointer.
   *      done_q       = done queue.
   */
  static void
  qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
  		     struct list_head *done_q)
  {
  	unsigned int bus, target, lun;
  	int sense_sz;
  	struct srb *sp;
  	struct scsi_cmnd *cmd;
  	uint32_t handle = le32_to_cpu(pkt->handle);
  	uint16_t scsi_status = le16_to_cpu(pkt->scsi_status);
  	uint16_t comp_status = le16_to_cpu(pkt->comp_status);
  
  	ENTER("qla1280_status_entry");
  
  	/* Validate handle. */
  	if (handle < MAX_OUTSTANDING_COMMANDS)
  		sp = ha->outstanding_cmds[handle];
  	else
  		sp = NULL;
  
  	if (!sp) {
  		printk(KERN_WARNING "qla1280: Status Entry invalid handle
  ");
  		goto out;
  	}
  
  	/* Free outstanding command slot. */
  	ha->outstanding_cmds[handle] = NULL;
  
  	cmd = sp->cmd;
  
  	/* Generate LU queue on cntrl, target, LUN */
  	bus = SCSI_BUS_32(cmd);
  	target = SCSI_TCN_32(cmd);
  	lun = SCSI_LUN_32(cmd);
  
  	if (comp_status || scsi_status) {
  		dprintk(3, "scsi: comp_status = 0x%x, scsi_status = "
  			"0x%x, handle = 0x%x
  ", comp_status,
  			scsi_status, handle);
  	}

  	/* Target busy or queue full */
  	if ((scsi_status & 0xFF) == SAM_STAT_TASK_SET_FULL ||
  	    (scsi_status & 0xFF) == SAM_STAT_BUSY) {
  		CMD_RESULT(cmd) = scsi_status & 0xff;

  	} else {
  
  		/* Save ISP completion status */
  		CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd);

  		if (scsi_status & SAM_STAT_CHECK_CONDITION) {

  			if (comp_status != CS_ARS_FAILED) {
  				uint16_t req_sense_length =
  					le16_to_cpu(pkt->req_sense_length);
  				if (req_sense_length < CMD_SNSLEN(cmd))
  					sense_sz = req_sense_length;
  				else
  					/*
  					 * scsi_cmnd->sense_buffer is
  					 * 64 bytes, why only copy 63?
  					 * This looks wrong! /Jes
  					 */
  					sense_sz = CMD_SNSLEN(cmd) - 1;
  
  				memcpy(cmd->sense_buffer,
  				       &pkt->req_sense_data, sense_sz);
  			} else
  				sense_sz = 0;
  			memset(cmd->sense_buffer + sense_sz, 0,

  			       SCSI_SENSE_BUFFERSIZE - sense_sz);

  
  			dprintk(2, "qla1280_status_entry: Check "
  				"condition Sense data, b %i, t %i, "
  				"l %i
  ", bus, target, lun);
  			if (sense_sz)
  				qla1280_dump_buffer(2,
  						    (char *)cmd->sense_buffer,
  						    sense_sz);
  		}
  	}

  	CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;

  	/* Place command on done queue. */
  	list_add_tail(&sp->list, done_q);
   out:
  	LEAVE("qla1280_status_entry");
  }
  
  /*
   *  qla1280_error_entry
   *      Processes error entry.
   *
   * Input:
   *      ha           = adapter block pointer.
   *      pkt          = entry pointer.
   *      done_q       = done queue.
   */
  static void
  qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt,
  		    struct list_head *done_q)
  {
  	struct srb *sp;
  	uint32_t handle = le32_to_cpu(pkt->handle);
  
  	ENTER("qla1280_error_entry");
  
  	if (pkt->entry_status & BIT_3)
  		dprintk(2, "qla1280_error_entry: BAD PAYLOAD flag error
  ");
  	else if (pkt->entry_status & BIT_2)
  		dprintk(2, "qla1280_error_entry: BAD HEADER flag error
  ");
  	else if (pkt->entry_status & BIT_1)
  		dprintk(2, "qla1280_error_entry: FULL flag error
  ");
  	else
  		dprintk(2, "qla1280_error_entry: UNKNOWN flag error
  ");
  
  	/* Validate handle. */
  	if (handle < MAX_OUTSTANDING_COMMANDS)
  		sp = ha->outstanding_cmds[handle];
  	else
  		sp = NULL;
  
  	if (sp) {
  		/* Free outstanding command slot. */
  		ha->outstanding_cmds[handle] = NULL;
  
  		/* Bad payload or header */
  		if (pkt->entry_status & (BIT_3 + BIT_2)) {
  			/* Bad payload or header, set error status. */
  			/* CMD_RESULT(sp->cmd) = CS_BAD_PAYLOAD; */
  			CMD_RESULT(sp->cmd) = DID_ERROR << 16;
  		} else if (pkt->entry_status & BIT_1) {	/* FULL flag */
  			CMD_RESULT(sp->cmd) = DID_BUS_BUSY << 16;
  		} else {
  			/* Set error status. */
  			CMD_RESULT(sp->cmd) = DID_ERROR << 16;
  		}

  		CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;

  		/* Place command on done queue. */
  		list_add_tail(&sp->list, done_q);
  	}
  #ifdef QLA_64BIT_PTR
  	else if (pkt->entry_type == COMMAND_A64_TYPE) {
  		printk(KERN_WARNING "!qla1280: Error Entry invalid handle");
  	}
  #endif
  
  	LEAVE("qla1280_error_entry");
  }
  
  /*
   *  qla1280_abort_isp
   *      Resets ISP and aborts all outstanding commands.
   *
   * Input:
   *      ha           = adapter block pointer.
   *
   * Returns:
   *      0 = success
   */
  static int
  qla1280_abort_isp(struct scsi_qla_host *ha)
  {
  	struct device_reg __iomem *reg = ha->iobase;
  	struct srb *sp;
  	int status = 0;
  	int cnt;
  	int bus;
  
  	ENTER("qla1280_abort_isp");
  
  	if (ha->flags.abort_isp_active || !ha->flags.online)
  		goto out;
  	
  	ha->flags.abort_isp_active = 1;
  
  	/* Disable ISP interrupts. */
  	qla1280_disable_intrs(ha);
  	WRT_REG_WORD(&reg->host_cmd, HC_PAUSE_RISC);
  	RD_REG_WORD(&reg->id_l);
  
  	printk(KERN_INFO "scsi(%li): dequeuing outstanding commands
  ",
  	       ha->host_no);
  	/* Dequeue all commands in outstanding command list. */
  	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
  		struct scsi_cmnd *cmd;
  		sp = ha->outstanding_cmds[cnt];
  		if (sp) {

  			cmd = sp->cmd;
  			CMD_RESULT(cmd) = DID_RESET << 16;

  			CMD_HANDLE(cmd) = COMPLETED_HANDLE;

  			ha->outstanding_cmds[cnt] = NULL;

  			list_add_tail(&sp->list, &ha->done_q);

  		}
  	}

  	qla1280_done(ha);

  	status = qla1280_load_firmware(ha);
  	if (status)
  		goto out;
  
  	/* Setup adapter based on NVRAM parameters. */
  	qla1280_nvram_config (ha);
  
  	status = qla1280_init_rings(ha);
  	if (status)
  		goto out;
  		
  	/* Issue SCSI reset. */
  	for (bus = 0; bus < ha->ports; bus++)
  		qla1280_bus_reset(ha, bus);
  		
  	ha->flags.abort_isp_active = 0;
   out:
  	if (status) {
  		printk(KERN_WARNING
  		       "qla1280: ISP error recovery failed, board disabled");
  		qla1280_reset_adapter(ha);
  		dprintk(2, "qla1280_abort_isp: **** FAILED ****
  ");
  	}
  
  	LEAVE("qla1280_abort_isp");
  	return status;
  }
  
  
  /*
   * qla1280_debounce_register
   *      Debounce register.
   *
   * Input:
   *      port = register address.
   *
   * Returns:
   *      register value.
   */
  static u16
  qla1280_debounce_register(volatile u16 __iomem * addr)
  {
  	volatile u16 ret;
  	volatile u16 ret2;
  
  	ret = RD_REG_WORD(addr);
  	ret2 = RD_REG_WORD(addr);
  
  	if (ret == ret2)
  		return ret;
  
  	do {
  		cpu_relax();
  		ret = RD_REG_WORD(addr);
  		ret2 = RD_REG_WORD(addr);
  	} while (ret != ret2);
  
  	return ret;
  }
  
  
  /************************************************************************
   * qla1280_check_for_dead_scsi_bus                                      *
   *                                                                      *
   *    This routine checks for a dead SCSI bus                           *
   ************************************************************************/
  #define SET_SXP_BANK            0x0100
  #define SCSI_PHASE_INVALID      0x87FF
  static int
  qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
  {
  	uint16_t config_reg, scsi_control;
  	struct device_reg __iomem *reg = ha->iobase;
  
  	if (ha->bus_settings[bus].scsi_bus_dead) {
  		WRT_REG_WORD(&reg->host_cmd, HC_PAUSE_RISC);
  		config_reg = RD_REG_WORD(&reg->cfg_1);
  		WRT_REG_WORD(&reg->cfg_1, SET_SXP_BANK);
  		scsi_control = RD_REG_WORD(&reg->scsiControlPins);
  		WRT_REG_WORD(&reg->cfg_1, config_reg);
  		WRT_REG_WORD(&reg->host_cmd, HC_RELEASE_RISC);
  
  		if (scsi_control == SCSI_PHASE_INVALID) {
  			ha->bus_settings[bus].scsi_bus_dead = 1;

  			return 1;	/* bus is dead */
  		} else {
  			ha->bus_settings[bus].scsi_bus_dead = 0;
  			ha->bus_settings[bus].failed_reset_count = 0;
  		}
  	}
  	return 0;		/* bus is not dead */
  }
  
  static void
  qla1280_get_target_parameters(struct scsi_qla_host *ha,
  			      struct scsi_device *device)
  {
  	uint16_t mb[MAILBOX_REGISTER_COUNT];
  	int bus, target, lun;
  
  	bus = device->channel;
  	target = device->id;
  	lun = device->lun;
  
  
  	mb[0] = MBC_GET_TARGET_PARAMETERS;
  	mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
  	mb[1] <<= 8;
  	qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,
  				&mb[0]);
  
  	printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun);
  
  	if (mb[3] != 0) {
  		printk(" Sync: period %d, offset %d",
  		       (mb[3] & 0xff), (mb[3] >> 8));
  		if (mb[2] & BIT_13)
  			printk(", Wide");
  		if ((mb[2] & BIT_5) && ((mb[6] >> 8) & 0xff) >= 2)
  			printk(", DT");
  	} else
  		printk(" Async");

  	if (device->simple_tags)

  		printk(", Tagged queuing: depth %d", device->queue_depth);
  	printk("
  ");
  }
  
  
  #if DEBUG_QLA1280
  static void
  __qla1280_dump_buffer(char *b, int size)
  {
  	int cnt;
  	u8 c;
  
  	printk(KERN_DEBUG " 0   1   2   3   4   5   6   7   8   9   Ah  "
  	       "Bh  Ch  Dh  Eh  Fh
  ");
  	printk(KERN_DEBUG "---------------------------------------------"
  	       "------------------
  ");
  
  	for (cnt = 0; cnt < size;) {
  		c = *b++;
  
  		printk("0x%02x", c);
  		cnt++;
  		if (!(cnt % 16))
  			printk("
  ");
  		else
  			printk(" ");
  	}
  	if (cnt % 16)
  		printk("
  ");
  }
  
  /**************************************************************************
   *   ql1280_print_scsi_cmd
   *
   **************************************************************************/
  static void
  __qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
  {
  	struct scsi_qla_host *ha;
  	struct Scsi_Host *host = CMD_HOST(cmd);
  	struct srb *sp;
  	/* struct scatterlist *sg; */
  
  	int i;
  	ha = (struct scsi_qla_host *)host->hostdata;
  
  	sp = (struct srb *)CMD_SP(cmd);
  	printk("SCSI Command @= 0x%p, Handle=0x%p
  ", cmd, CMD_HANDLE(cmd));
  	printk("  chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x
  ",
  	       SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd),
  	       CMD_CDBLEN(cmd));
  	printk(" CDB = ");
  	for (i = 0; i < cmd->cmd_len; i++) {
  		printk("0x%02x ", cmd->cmnd[i]);
  	}

  	printk("  seg_cnt =%d
  ", scsi_sg_count(cmd));

  	printk("  request buffer=0x%p, request buffer len=0x%x
  ",

  	       scsi_sglist(cmd), scsi_bufflen(cmd));

  	/* if (cmd->use_sg)
  	   {
  	   sg = (struct scatterlist *) cmd->request_buffer;
  	   printk("  SG buffer: 
  ");
  	   qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist)));
  	   } */
  	printk("  tag=%d, transfersize=0x%x 
  ",
  	       cmd->tag, cmd->transfersize);

  	printk("  SP=0x%p
  ", CMD_SP(cmd));

  	printk(" underflow size = 0x%x, direction=0x%x
  ",
  	       cmd->underflow, cmd->sc_data_direction);
  }
  
  /**************************************************************************
   *   ql1280_dump_device
   *
   **************************************************************************/
  static void
  ql1280_dump_device(struct scsi_qla_host *ha)
  {
  
  	struct scsi_cmnd *cp;
  	struct srb *sp;
  	int i;
  
  	printk(KERN_DEBUG "Outstanding Commands on controller:
  ");
  
  	for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
  		if ((sp = ha->outstanding_cmds[i]) == NULL)
  			continue;
  		if ((cp = sp->cmd) == NULL)
  			continue;
  		qla1280_print_scsi_cmd(1, cp);
  	}
  }
  #endif
  
  
  enum tokens {
  	TOKEN_NVRAM,
  	TOKEN_SYNC,
  	TOKEN_WIDE,
  	TOKEN_PPR,
  	TOKEN_VERBOSE,
  	TOKEN_DEBUG,
  };
  
  struct setup_tokens {
  	char *token;
  	int val;
  };
  
  static struct setup_tokens setup_token[] __initdata = 
  {
  	{ "nvram", TOKEN_NVRAM },
  	{ "sync", TOKEN_SYNC },
  	{ "wide", TOKEN_WIDE },
  	{ "ppr", TOKEN_PPR },
  	{ "verbose", TOKEN_VERBOSE },
  	{ "debug", TOKEN_DEBUG },
  };
  
  
  /**************************************************************************
   *   qla1280_setup
   *
   *   Handle boot parameters. This really needs to be changed so one
   *   can specify per adapter parameters.
   **************************************************************************/
  static int __init
  qla1280_setup(char *s)
  {
  	char *cp, *ptr;
  	unsigned long val;
  	int toke;
  
  	cp = s;
  
  	while (cp && (ptr = strchr(cp, ':'))) {
  		ptr++;
  		if (!strcmp(ptr, "yes")) {
  			val = 0x10000;
  			ptr += 3;
  		} else if (!strcmp(ptr, "no")) {
   			val = 0;
  			ptr += 2;
  		} else
  			val = simple_strtoul(ptr, &ptr, 0);
  
  		switch ((toke = qla1280_get_token(cp))) {
  		case TOKEN_NVRAM:
  			if (!val)
  				driver_setup.no_nvram = 1;
  			break;
  		case TOKEN_SYNC:
  			if (!val)
  				driver_setup.no_sync = 1;
  			else if (val != 0x10000)
  				driver_setup.sync_mask = val;
  			break;
  		case TOKEN_WIDE:
  			if (!val)
  				driver_setup.no_wide = 1;
  			else if (val != 0x10000)
  				driver_setup.wide_mask = val;
  			break;
  		case TOKEN_PPR:
  			if (!val)
  				driver_setup.no_ppr = 1;
  			else if (val != 0x10000)
  				driver_setup.ppr_mask = val;
  			break;
  		case TOKEN_VERBOSE:
  			qla1280_verbose = val;
  			break;
  		default:
  			printk(KERN_INFO "qla1280: unknown boot option %s
  ",
  			       cp);
  		}
  
  		cp = strchr(ptr, ';');
  		if (cp)
  			cp++;
  		else {
  			break;
  		}
  	}
  	return 1;
  }

  static int __init

  qla1280_get_token(char *str)
  {
  	char *sep;
  	long ret = -1;

  	int i;

  
  	sep = strchr(str, ':');
  
  	if (sep) {

  		for (i = 0; i < ARRAY_SIZE(setup_token); i++) {

  			if (!strncmp(setup_token[i].token, str, (sep - str))) {
  				ret =  setup_token[i].val;
  				break;
  			}
  		}
  	}
  
  	return ret;
  }

  static struct scsi_host_template qla1280_driver_template = {
  	.module			= THIS_MODULE,
  	.proc_name		= "qla1280",
  	.name			= "Qlogic ISP 1280/12160",
  	.info			= qla1280_info,
  	.slave_configure	= qla1280_slave_configure,
  	.queuecommand		= qla1280_queuecommand,
  	.eh_abort_handler	= qla1280_eh_abort,
  	.eh_device_reset_handler= qla1280_eh_device_reset,
  	.eh_bus_reset_handler	= qla1280_eh_bus_reset,
  	.eh_host_reset_handler	= qla1280_eh_adapter_reset,
  	.bios_param		= qla1280_biosparam,
  	.can_queue		= 0xfffff,
  	.this_id		= -1,
  	.sg_tablesize		= SG_ALL,
  	.cmd_per_lun		= 1,
  	.use_clustering		= ENABLE_CLUSTERING,
  };

  
  static int __devinit
  qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
  {
  	int devnum = id->driver_data;
  	struct qla_boards *bdp = &ql1280_board_tbl[devnum];
  	struct Scsi_Host *host;
  	struct scsi_qla_host *ha;
  	int error = -ENODEV;
  
  	/* Bypass all AMI SUBSYS VENDOR IDs */
  	if (pdev->subsystem_vendor == PCI_VENDOR_ID_AMI) {
  		printk(KERN_INFO
  		       "qla1280: Skipping AMI SubSys Vendor ID Chip
  ");
  		goto error;
  	}
  
  	printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i
  ",
  	       bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn));
  	
  	if (pci_enable_device(pdev)) {
  		printk(KERN_WARNING
  		       "qla1280: Failed to enabled pci device, aborting.
  ");
  		goto error;
  	}
  
  	pci_set_master(pdev);
  
  	error = -ENOMEM;
  	host = scsi_host_alloc(&qla1280_driver_template, sizeof(*ha));
  	if (!host) {
  		printk(KERN_WARNING
  		       "qla1280: Failed to register host, aborting.
  ");
  		goto error_disable_device;
  	}
  
  	ha = (struct scsi_qla_host *)host->hostdata;
  	memset(ha, 0, sizeof(struct scsi_qla_host));
  
  	ha->pdev = pdev;
  	ha->devnum = devnum;	/* specifies microcode load address */
  
  #ifdef QLA_64BIT_PTR

  	if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(64))) {

  		if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32))) {

  			printk(KERN_WARNING "scsi(%li): Unable to set a "

  			       "suitable DMA mask - aborting
  ", ha->host_no);

  			error = -ENODEV;

  			goto error_put_host;

  		}
  	} else
  		dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled
  ",
  			ha->host_no);
  #else

  	if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32))) {

  		printk(KERN_WARNING "scsi(%li): Unable to set a "

  		       "suitable DMA mask - aborting
  ", ha->host_no);

  		error = -ENODEV;

  		goto error_put_host;

  	}
  #endif
  
  	ha->request_ring = pci_alloc_consistent(ha->pdev,

  			((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),

  			&ha->request_dma);
  	if (!ha->request_ring) {
  		printk(KERN_INFO "qla1280: Failed to get request memory
  ");
  		goto error_put_host;
  	}
  
  	ha->response_ring = pci_alloc_consistent(ha->pdev,

  			((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),

  			&ha->response_dma);
  	if (!ha->response_ring) {
  		printk(KERN_INFO "qla1280: Failed to get response memory
  ");
  		goto error_free_request_ring;
  	}
  
  	ha->ports = bdp->numPorts;
  
  	ha->host = host;
  	ha->host_no = host->host_no;
  
  	host->irq = pdev->irq;
  	host->max_channel = bdp->numPorts - 1;
  	host->max_lun = MAX_LUNS - 1;
  	host->max_id = MAX_TARGETS;
  	host->max_sectors = 1024;
  	host->unique_id = host->host_no;

  	error = -ENODEV;
  
  #if MEMORY_MAPPED_IO

  	ha->mmpbase = pci_ioremap_bar(ha->pdev, 1);

  	if (!ha->mmpbase) {
  		printk(KERN_INFO "qla1280: Unable to map I/O memory
  ");
  		goto error_free_response_ring;
  	}
  
  	host->base = (unsigned long)ha->mmpbase;
  	ha->iobase = (struct device_reg __iomem *)ha->mmpbase;
  #else
  	host->io_port = pci_resource_start(ha->pdev, 0);
  	if (!request_region(host->io_port, 0xff, "qla1280")) {
  		printk(KERN_INFO "qla1280: Failed to reserve i/o region "
  				 "0x%04lx-0x%04lx - already in use
  ",
  		       host->io_port, host->io_port + 0xff);
  		goto error_free_response_ring;
  	}
  
  	ha->iobase = (struct device_reg *)host->io_port;
  #endif
  
  	INIT_LIST_HEAD(&ha->done_q);
  
  	/* Disable ISP interrupts. */
  	qla1280_disable_intrs(ha);

  	if (request_irq(pdev->irq, qla1280_intr_handler, IRQF_SHARED,

  				"qla1280", ha)) {
  		printk("qla1280 : Failed to reserve interrupt %d already "
  		       "in use
  ", pdev->irq);
  		goto error_release_region;
  	}
  
  	/* load the F/W, read paramaters, and init the H/W */
  	if (qla1280_initialize_adapter(ha)) {
  		printk(KERN_INFO "qla1x160: Failed to initialize adapter
  ");
  		goto error_free_irq;
  	}
  
  	/* set our host ID  (need to do something about our two IDs) */
  	host->this_id = ha->bus_settings[0].id;
  
  	pci_set_drvdata(pdev, host);

  	error = scsi_add_host(host, &pdev->dev);
  	if (error)
  		goto error_disable_adapter;
  	scsi_scan_host(host);

  
  	return 0;

   error_disable_adapter:

  	qla1280_disable_intrs(ha);

   error_free_irq:
  	free_irq(pdev->irq, ha);
   error_release_region:
  #if MEMORY_MAPPED_IO
  	iounmap(ha->mmpbase);
  #else
  	release_region(host->io_port, 0xff);
  #endif
   error_free_response_ring:
  	pci_free_consistent(ha->pdev,

  			((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),

  			ha->response_ring, ha->response_dma);
   error_free_request_ring:
  	pci_free_consistent(ha->pdev,

  			((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),

  			ha->request_ring, ha->request_dma);
   error_put_host:
  	scsi_host_put(host);
   error_disable_device:
  	pci_disable_device(pdev);
   error:
  	return error;
  }
  
  
  static void __devexit
  qla1280_remove_one(struct pci_dev *pdev)
  {
  	struct Scsi_Host *host = pci_get_drvdata(pdev);
  	struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;

  	scsi_remove_host(host);

  	qla1280_disable_intrs(ha);

  
  	free_irq(pdev->irq, ha);
  
  #if MEMORY_MAPPED_IO
  	iounmap(ha->mmpbase);
  #else
  	release_region(host->io_port, 0xff);
  #endif
  
  	pci_free_consistent(ha->pdev,
  			((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
  			ha->request_ring, ha->request_dma);
  	pci_free_consistent(ha->pdev,
  			((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
  			ha->response_ring, ha->response_dma);
  
  	pci_disable_device(pdev);
  
  	scsi_host_put(host);
  }

  static struct pci_driver qla1280_pci_driver = {
  	.name		= "qla1280",
  	.id_table	= qla1280_pci_tbl,
  	.probe		= qla1280_probe_one,
  	.remove		= __devexit_p(qla1280_remove_one),
  };
  
  static int __init
  qla1280_init(void)
  {
  	if (sizeof(struct srb) > sizeof(struct scsi_pointer)) {
  		printk(KERN_WARNING
  		       "qla1280: struct srb too big, aborting
  ");
  		return -EINVAL;
  	}
  
  #ifdef MODULE
  	/*
  	 * If we are called as a module, the qla1280 pointer may not be null
  	 * and it would point to our bootup string, just like on the lilo
  	 * command line.  IF not NULL, then process this config string with
  	 * qla1280_setup
  	 *
  	 * Boot time Options
  	 * To add options at boot time add a line to your lilo.conf file like:
  	 * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
  	 * which will result in the first four devices on the first two
  	 * controllers being set to a tagged queue depth of 32.
  	 */
  	if (qla1280)
  		qla1280_setup(qla1280);
  #endif

  	return pci_register_driver(&qla1280_pci_driver);

  }
  
  static void __exit
  qla1280_exit(void)
  {

  	int i;

  	pci_unregister_driver(&qla1280_pci_driver);

  	/* release any allocated firmware images */
  	for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
  		if (qla1280_fw_tbl[i].fw) {
  			release_firmware(qla1280_fw_tbl[i].fw);
  			qla1280_fw_tbl[i].fw = NULL;
  		}
  	}

  }
  
  module_init(qla1280_init);
  module_exit(qla1280_exit);

  
  MODULE_AUTHOR("Qlogic & Jes Sorensen");
  MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
  MODULE_LICENSE("GPL");

  MODULE_FIRMWARE("qlogic/1040.bin");
  MODULE_FIRMWARE("qlogic/1280.bin");
  MODULE_FIRMWARE("qlogic/12160.bin");

  MODULE_VERSION(QLA1280_VERSION);
  
  /*
   * Overrides for Emacs so that we almost follow Linus's tabbing style.
   * Emacs will notice this stuff at the end of the file and automatically
   * adjust the settings for this buffer only.  This must remain at the end
   * of the file.
   * ---------------------------------------------------------------------------
   * Local variables:
   * c-basic-offset: 8
   * tab-width: 8
   * End:
   */