Blame view
Documentation/isdn/README.avmb1
5.54 KB
1da177e4c
Linux-2.6.12-rc2
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 |
Driver for active AVM Controller.
The driver provides a kernel capi2.0 Interface (kernelcapi) and
on top of this a User-Level-CAPI2.0-interface (capi)
and a driver to connect isdn4linux with CAPI2.0 (capidrv).
The lowlevel interface can be used to implement a CAPI2.0
also for passive cards since July 1999.
The author can be reached at calle@calle.in-berlin.de.
The command avmcapictrl is part of the isdn4k-utils.
t4-files can be found at ftp://ftp.avm.de/cardware/b1/linux/firmware
Currently supported cards:
B1 ISA (all versions)
B1 PCI
T1/T1B (HEMA card)
M1
M2
B1 PCMCIA
Installing
----------
You need at least /dev/capi20 to load the firmware.
mknod /dev/capi20 c 68 0
mknod /dev/capi20.00 c 68 1
mknod /dev/capi20.01 c 68 2
.
.
.
mknod /dev/capi20.19 c 68 20
Running
-------
To use the card you need the t4-files to download the firmware.
AVM GmbH provides several t4-files for the different D-channel
protocols (b1.t4 for Euro-ISDN). Install these file in /lib/isdn.
if you configure as modules load the modules this way:
insmod /lib/modules/current/misc/capiutil.o
insmod /lib/modules/current/misc/b1.o
insmod /lib/modules/current/misc/kernelcapi.o
insmod /lib/modules/current/misc/capidrv.o
insmod /lib/modules/current/misc/capi.o
if you have an B1-PCI card load the module b1pci.o
insmod /lib/modules/current/misc/b1pci.o
and load the firmware with
avmcapictrl load /lib/isdn/b1.t4 1
if you have an B1-ISA card load the module b1isa.o
and add the card by calling
avmcapictrl add 0x150 15
and load the firmware by calling
avmcapictrl load /lib/isdn/b1.t4 1
if you have an T1-ISA card load the module t1isa.o
and add the card by calling
avmcapictrl add 0x450 15 T1 0
and load the firmware by calling
avmcapictrl load /lib/isdn/t1.t4 1
if you have an PCMCIA card (B1/M1/M2) load the module b1pcmcia.o
before you insert the card.
Leased Lines with B1
--------------------
Init card and load firmware.
For an D64S use "FV: 1" as phone number
For an D64S2 use "FV: 1" and "FV: 2" for multilink
or "FV: 1,2" to use CAPI channel bundling.
/proc-Interface
-----------------
/proc/capi:
dr-xr-xr-x 2 root root 0 Jul 1 14:03 .
dr-xr-xr-x 82 root root 0 Jun 30 19:08 ..
-r--r--r-- 1 root root 0 Jul 1 14:03 applications
-r--r--r-- 1 root root 0 Jul 1 14:03 applstats
-r--r--r-- 1 root root 0 Jul 1 14:03 capi20
-r--r--r-- 1 root root 0 Jul 1 14:03 capidrv
-r--r--r-- 1 root root 0 Jul 1 14:03 controller
-r--r--r-- 1 root root 0 Jul 1 14:03 contrstats
-r--r--r-- 1 root root 0 Jul 1 14:03 driver
-r--r--r-- 1 root root 0 Jul 1 14:03 ncci
-r--r--r-- 1 root root 0 Jul 1 14:03 users
/proc/capi/applications:
applid level3cnt datablkcnt datablklen ncci-cnt recvqueuelen
level3cnt: capi_register parameter
datablkcnt: capi_register parameter
ncci-cnt: current number of nccis (connections)
recvqueuelen: number of messages on receive queue
for example:
1 -2 16 2048 1 0
2 2 7 2048 1 0
/proc/capi/applstats:
applid recvctlmsg nrecvdatamsg nsentctlmsg nsentdatamsg
recvctlmsg: capi messages received without DATA_B3_IND
recvdatamsg: capi DATA_B3_IND received
sentctlmsg: capi messages sent without DATA_B3_REQ
sentdatamsg: capi DATA_B3_REQ sent
for example:
1 2057 1699 1721 1699
/proc/capi/capi20: statistics of capi.o (/dev/capi20)
minor nopen nrecvdropmsg nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
minor: minor device number of capi device
nopen: number of calls to devices open
nrecvdropmsg: capi messages dropped (messages in recvqueue in close)
nrecvctlmsg: capi messages received without DATA_B3_IND
nrecvdatamsg: capi DATA_B3_IND received
nsentctlmsg: capi messages sent without DATA_B3_REQ
nsentdatamsg: capi DATA_B3_REQ sent
for example:
1 2 18 0 16 2
/proc/capi/capidrv: statistics of capidrv.o (capi messages)
nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
nrecvctlmsg: capi messages received without DATA_B3_IND
nrecvdatamsg: capi DATA_B3_IND received
nsentctlmsg: capi messages sent without DATA_B3_REQ
nsentdatamsg: capi DATA_B3_REQ sent
for example:
2780 2226 2256 2226
/proc/capi/controller:
controller drivername state cardname controllerinfo
for example:
1 b1pci running b1pci-e000 B1 3.07-01 0xe000 19
2 t1isa running t1isa-450 B1 3.07-01 0x450 11 0
3 b1pcmcia running m2-150 B1 3.07-01 0x150 5
/proc/capi/contrstats:
controller nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
nrecvctlmsg: capi messages received without DATA_B3_IND
nrecvdatamsg: capi DATA_B3_IND received
nsentctlmsg: capi messages sent without DATA_B3_REQ
nsentdatamsg: capi DATA_B3_REQ sent
for example:
1 2845 2272 2310 2274
2 2 0 2 0
3 2 0 2 0
/proc/capi/driver:
drivername ncontroller
for example:
b1pci 1
t1isa 1
b1pcmcia 1
b1isa 0
/proc/capi/ncci:
apllid ncci winsize sendwindow
for example:
1 0x10101 8 0
/proc/capi/users: kernelmodules that use the kernelcapi.
name
for example:
capidrv
capi20
Questions
---------
Check out the FAQ (ftp.isdn4linux.de) or subscribe to the
linux-avmb1@calle.in-berlin.de mailing list by sending
a mail to majordomo@calle.in-berlin.de with
subscribe linux-avmb1
in the body.
German documentation and several scripts can be found at
ftp://ftp.avm.de/cardware/b1/linux/
Bugs
----
If you find any please let me know.
Enjoy,
Carsten Paeth (calle@calle.in-berlin.de)
|