Blame view
Documentation/hwmon/nct7904
1.46 KB
9c947d25c hwmon: Add Nuvoto... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 |
Kernel driver nct7904 ==================== Supported chip: * Nuvoton NCT7904D Prefix: nct7904 Addresses: I2C 0x2d, 0x2e Datasheet: Publicly available at Nuvoton website http://www.nuvoton.com/ Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> Description ----------- The NCT7904D is a hardware monitor supporting up to 20 voltage sensors, internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature interface, up to 12 fan tachometer inputs, up to 4 fan control channels with SmartFan. Sysfs entries ------------- Currently, the driver supports only the following features: in[1-20]_input Input voltage measurements (mV) fan[1-12]_input Fan tachometer measurements (rpm) temp1_input Local temperature (1/1000 degree, 0.125 degree resolution) temp[2-9]_input CPU temperatures (1/1000 degree, 0.125 degree resolution) |
0d6aaffc3 hwmon: (nct7904) ... |
37 |
pwm[1-4]_enable R/W, 1/2 for manual or SmartFan mode |
9c947d25c hwmon: Add Nuvoto... |
38 39 |
Setting SmartFan mode is supported only if it has been previously configured by BIOS (or configuration EEPROM) |
0d6aaffc3 hwmon: (nct7904) ... |
40 |
pwm[1-4] R/O in SmartFan mode, R/W in manual control mode |
9c947d25c hwmon: Add Nuvoto... |
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 |
The driver checks sensor control registers and does not export the sensors that are not enabled. Anyway, a sensor that is enabled may actually be not connected and thus provide zero readings. Limitations ----------- The following features are not supported in current version: - SmartFan control - Watchdog - GPIO - external temperature sensors - SMI - min/max values - many other... |