// SPDX-License-Identifier: GPL-2.0

  #include <linux/blk-mq.h>

  #include <linux/blk-pm.h>
  #include <linux/blkdev.h>
  #include <linux/pm_runtime.h>

  #include "blk-mq.h"
  #include "blk-mq-tag.h"

  
  /**
   * blk_pm_runtime_init - Block layer runtime PM initialization routine
   * @q: the queue of the device
   * @dev: the device the queue belongs to
   *
   * Description:
   *    Initialize runtime-PM-related fields for @q and start auto suspend for
   *    @dev. Drivers that want to take advantage of request-based runtime PM
   *    should call this function after @dev has been initialized, and its
   *    request queue @q has been allocated, and runtime PM for it can not happen
   *    yet(either due to disabled/forbidden or its usage_count > 0). In most
   *    cases, driver should call this function before any I/O has taken place.
   *
   *    This function takes care of setting up using auto suspend for the device,
   *    the autosuspend delay is set to -1 to make runtime suspend impossible
   *    until an updated value is either set by user or by driver. Drivers do
   *    not need to touch other autosuspend settings.
   *
   *    The block layer runtime PM is request based, so only works for drivers
   *    that use request as their IO unit instead of those directly use bio's.
   */
  void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
  {

  	q->dev = dev;
  	q->rpm_status = RPM_ACTIVE;
  	pm_runtime_set_autosuspend_delay(q->dev, -1);
  	pm_runtime_use_autosuspend(q->dev);
  }
  EXPORT_SYMBOL(blk_pm_runtime_init);
  
  /**
   * blk_pre_runtime_suspend - Pre runtime suspend check
   * @q: the queue of the device
   *
   * Description:
   *    This function will check if runtime suspend is allowed for the device
   *    by examining if there are any requests pending in the queue. If there
   *    are requests pending, the device can not be runtime suspended; otherwise,
   *    the queue's status will be updated to SUSPENDING and the driver can
   *    proceed to suspend the device.
   *
   *    For the not allowed case, we mark last busy for the device so that
   *    runtime PM core will try to autosuspend it some time later.
   *
   *    This function should be called near the start of the device's
   *    runtime_suspend callback.
   *
   * Return:
   *    0		- OK to runtime suspend the device
   *    -EBUSY	- Device should not be runtime suspended
   */
  int blk_pre_runtime_suspend(struct request_queue *q)
  {
  	int ret = 0;
  
  	if (!q->dev)
  		return ret;

  	WARN_ON_ONCE(q->rpm_status != RPM_ACTIVE);
  
  	/*
  	 * Increase the pm_only counter before checking whether any
  	 * non-PM blk_queue_enter() calls are in progress to avoid that any
  	 * new non-PM blk_queue_enter() calls succeed before the pm_only
  	 * counter is decreased again.
  	 */
  	blk_set_pm_only(q);
  	ret = -EBUSY;
  	/* Switch q_usage_counter from per-cpu to atomic mode. */
  	blk_freeze_queue_start(q);
  	/*
  	 * Wait until atomic mode has been reached. Since that
  	 * involves calling call_rcu(), it is guaranteed that later
  	 * blk_queue_enter() calls see the pm-only state. See also
  	 * http://lwn.net/Articles/573497/.
  	 */
  	percpu_ref_switch_to_atomic_sync(&q->q_usage_counter);
  	if (percpu_ref_is_zero(&q->q_usage_counter))
  		ret = 0;
  	/* Switch q_usage_counter back to per-cpu mode. */
  	blk_mq_unfreeze_queue(q);

  	spin_lock_irq(&q->queue_lock);

  	if (ret < 0)

  		pm_runtime_mark_last_busy(q->dev);

  	else

  		q->rpm_status = RPM_SUSPENDING;

  	spin_unlock_irq(&q->queue_lock);

  
  	if (ret)
  		blk_clear_pm_only(q);

  	return ret;
  }
  EXPORT_SYMBOL(blk_pre_runtime_suspend);
  
  /**
   * blk_post_runtime_suspend - Post runtime suspend processing
   * @q: the queue of the device
   * @err: return value of the device's runtime_suspend function
   *
   * Description:
   *    Update the queue's runtime status according to the return value of the
   *    device's runtime suspend function and mark last busy for the device so
   *    that PM core will try to auto suspend the device at a later time.
   *
   *    This function should be called near the end of the device's
   *    runtime_suspend callback.
   */
  void blk_post_runtime_suspend(struct request_queue *q, int err)
  {
  	if (!q->dev)
  		return;

  	spin_lock_irq(&q->queue_lock);

  	if (!err) {
  		q->rpm_status = RPM_SUSPENDED;
  	} else {
  		q->rpm_status = RPM_ACTIVE;
  		pm_runtime_mark_last_busy(q->dev);
  	}

  	spin_unlock_irq(&q->queue_lock);

  
  	if (err)
  		blk_clear_pm_only(q);

  }
  EXPORT_SYMBOL(blk_post_runtime_suspend);
  
  /**
   * blk_pre_runtime_resume - Pre runtime resume processing
   * @q: the queue of the device
   *
   * Description:
   *    Update the queue's runtime status to RESUMING in preparation for the
   *    runtime resume of the device.
   *
   *    This function should be called near the start of the device's
   *    runtime_resume callback.
   */
  void blk_pre_runtime_resume(struct request_queue *q)
  {
  	if (!q->dev)
  		return;

  	spin_lock_irq(&q->queue_lock);

  	q->rpm_status = RPM_RESUMING;

  	spin_unlock_irq(&q->queue_lock);

  }
  EXPORT_SYMBOL(blk_pre_runtime_resume);
  
  /**
   * blk_post_runtime_resume - Post runtime resume processing
   * @q: the queue of the device
   * @err: return value of the device's runtime_resume function
   *
   * Description:
   *    Update the queue's runtime status according to the return value of the
   *    device's runtime_resume function. If it is successfully resumed, process
   *    the requests that are queued into the device's queue when it is resuming
   *    and then mark last busy and initiate autosuspend for it.
   *
   *    This function should be called near the end of the device's
   *    runtime_resume callback.
   */
  void blk_post_runtime_resume(struct request_queue *q, int err)
  {
  	if (!q->dev)
  		return;

  	spin_lock_irq(&q->queue_lock);

  	if (!err) {
  		q->rpm_status = RPM_ACTIVE;

  		pm_runtime_mark_last_busy(q->dev);
  		pm_request_autosuspend(q->dev);
  	} else {
  		q->rpm_status = RPM_SUSPENDED;
  	}

  	spin_unlock_irq(&q->queue_lock);

  
  	if (!err)
  		blk_clear_pm_only(q);

  }
  EXPORT_SYMBOL(blk_post_runtime_resume);
  
  /**
   * blk_set_runtime_active - Force runtime status of the queue to be active
   * @q: the queue of the device
   *
   * If the device is left runtime suspended during system suspend the resume
   * hook typically resumes the device and corrects runtime status
   * accordingly. However, that does not affect the queue runtime PM status
   * which is still "suspended". This prevents processing requests from the
   * queue.
   *
   * This function can be used in driver's resume hook to correct queue
   * runtime PM status and re-enable peeking requests from the queue. It
   * should be called before first request is added to the queue.
   */
  void blk_set_runtime_active(struct request_queue *q)
  {

  	if (q->dev) {
  		spin_lock_irq(&q->queue_lock);
  		q->rpm_status = RPM_ACTIVE;
  		pm_runtime_mark_last_busy(q->dev);
  		pm_request_autosuspend(q->dev);
  		spin_unlock_irq(&q->queue_lock);
  	}

  }
  EXPORT_SYMBOL(blk_set_runtime_active);