Blame view
include/linux/atmel_serial.h
7.81 KB
1e6c9c287
|
1 |
/* |
fa3218d85
|
2 |
* include/linux/atmel_serial.h |
1e6c9c287
|
3 4 5 6 7 8 9 10 11 12 13 14 |
* * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People * * USART registers. * Based on AT91RM9200 datasheet revision E. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ |
7192f92c7
|
15 16 |
#ifndef ATMEL_SERIAL_H #define ATMEL_SERIAL_H |
1e6c9c287
|
17 |
|
3fad38601
|
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 |
#define ATMEL_US_CR 0x00 /* Control Register */ #define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */ #define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */ #define ATMEL_US_RXEN BIT(4) /* Receiver Enable */ #define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */ #define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */ #define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */ #define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */ #define ATMEL_US_STTBRK BIT(9) /* Start Break */ #define ATMEL_US_STPBRK BIT(10) /* Stop Break */ #define ATMEL_US_STTTO BIT(11) /* Start Time-out */ #define ATMEL_US_SENDA BIT(12) /* Send Address */ #define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */ #define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */ #define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */ #define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */ #define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */ #define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */ #define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */ |
b5199d468
|
37 38 39 40 41 |
#define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */ #define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */ #define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */ #define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */ #define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */ |
1e6c9c287
|
42 |
|
3fad38601
|
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 |
#define ATMEL_US_MR 0x04 /* Mode Register */ #define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ #define ATMEL_US_USMODE_NORMAL 0 #define ATMEL_US_USMODE_RS485 1 #define ATMEL_US_USMODE_HWHS 2 #define ATMEL_US_USMODE_MODEM 3 #define ATMEL_US_USMODE_ISO7816_T0 4 #define ATMEL_US_USMODE_ISO7816_T1 6 #define ATMEL_US_USMODE_IRDA 8 #define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ #define ATMEL_US_USCLKS_MCK (0 << 4) #define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) #define ATMEL_US_USCLKS_SCK (3 << 4) #define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ #define ATMEL_US_CHRL_5 (0 << 6) #define ATMEL_US_CHRL_6 (1 << 6) #define ATMEL_US_CHRL_7 (2 << 6) #define ATMEL_US_CHRL_8 (3 << 6) #define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ #define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ #define ATMEL_US_PAR_EVEN (0 << 9) #define ATMEL_US_PAR_ODD (1 << 9) #define ATMEL_US_PAR_SPACE (2 << 9) #define ATMEL_US_PAR_MARK (3 << 9) #define ATMEL_US_PAR_NONE (4 << 9) #define ATMEL_US_PAR_MULTI_DROP (6 << 9) #define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ #define ATMEL_US_NBSTOP_1 (0 << 12) #define ATMEL_US_NBSTOP_1_5 (1 << 12) #define ATMEL_US_NBSTOP_2 (2 << 12) #define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ #define ATMEL_US_CHMODE_NORMAL (0 << 14) #define ATMEL_US_CHMODE_ECHO (1 << 14) #define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) #define ATMEL_US_CHMODE_REM_LOOP (3 << 14) #define ATMEL_US_MSBF BIT(16) /* Bit Order */ #define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ #define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ #define ATMEL_US_OVER BIT(19) /* Oversampling Mode */ #define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ #define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ #define ATMEL_US_MAX_ITER GENMASK(26, 24) /* Max Iterations */ #define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ |
1e6c9c287
|
86 |
|
3fad38601
|
87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 |
#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ #define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */ #define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */ #define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */ #define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */ #define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */ #define ATMEL_US_OVRE BIT(5) /* Overrun Error */ #define ATMEL_US_FRAME BIT(6) /* Framing Error */ #define ATMEL_US_PARE BIT(7) /* Parity Error */ #define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */ #define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */ #define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */ #define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */ #define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */ #define ATMEL_US_NACK BIT(13) /* Non Acknowledge */ #define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */ #define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */ #define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */ #define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */ #define ATMEL_US_RI BIT(20) /* RI */ #define ATMEL_US_DSR BIT(21) /* DSR */ #define ATMEL_US_DCD BIT(22) /* DCD */ #define ATMEL_US_CTS BIT(23) /* CTS */ |
1e6c9c287
|
110 |
|
3fad38601
|
111 112 113 114 115 116 |
#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ #define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ #define ATMEL_US_CSR 0x14 /* Channel Status Register */ #define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ #define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ #define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */ |
1e6c9c287
|
117 |
|
3fad38601
|
118 119 |
#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ #define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ |
5bf5635ac
|
120 |
#define ATMEL_US_FP_OFFSET 16 /* Fractional Part */ |
36131cdfe
|
121 |
#define ATMEL_US_FP_MASK 0x7 |
1e6c9c287
|
122 |
|
2958ccee3
|
123 124 |
#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */ #define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */ |
3fad38601
|
125 |
#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ |
1e6c9c287
|
126 |
|
3fad38601
|
127 128 |
#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ #define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */ |
1e6c9c287
|
129 |
|
3fad38601
|
130 131 132 |
#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ #define ATMEL_US_NER 0x44 /* Number of Errors Register */ #define ATMEL_US_IF 0x4c /* IrDA Filter Register */ |
1e6c9c287
|
133 |
|
b5199d468
|
134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 |
#define ATMEL_US_CMPR 0x90 /* Comparaison Register */ #define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ #define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ #define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ #define ATMEL_US_ONE_DATA 0x0 #define ATMEL_US_TWO_DATA 0x1 #define ATMEL_US_FOUR_DATA 0x2 #define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ #define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ #define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ #define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ #define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ #define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ #define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ #define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ #define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ #define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */ #define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */ #define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */ #define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */ #define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */ #define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */ #define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */ #define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */ #define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */ #define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */ #define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */ #define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */ |
3fad38601
|
164 165 |
#define ATMEL_US_NAME 0xf0 /* Ip Name */ #define ATMEL_US_VERSION 0xfc /* Ip Version */ |
055560b04
|
166 |
|
1e6c9c287
|
167 |
#endif |