/* SPDX-License-Identifier: GPL-2.0-only */

  /*
   * Media Bus API header
   *
   * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>

   */
  
  #ifndef V4L2_MEDIABUS_H
  #define V4L2_MEDIABUS_H

  #include <linux/v4l2-mediabus.h>

  #include <linux/bitops.h>

  /* Parallel flags */
  /*
   * Can the client run in master or in slave mode. By "Master mode" an operation
   * mode is meant, when the client (e.g., a camera sensor) is producing
   * horizontal and vertical synchronisation. In "Slave mode" the host is
   * providing these signals to the slave.
   */

  #define V4L2_MBUS_MASTER			BIT(0)
  #define V4L2_MBUS_SLAVE				BIT(1)

  /*
   * Signal polarity flags
   * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
   * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
   * configuration of hardware that uses [HV]REF signals
   */

  #define V4L2_MBUS_HSYNC_ACTIVE_HIGH		BIT(2)
  #define V4L2_MBUS_HSYNC_ACTIVE_LOW		BIT(3)
  #define V4L2_MBUS_VSYNC_ACTIVE_HIGH		BIT(4)
  #define V4L2_MBUS_VSYNC_ACTIVE_LOW		BIT(5)
  #define V4L2_MBUS_PCLK_SAMPLE_RISING		BIT(6)
  #define V4L2_MBUS_PCLK_SAMPLE_FALLING		BIT(7)
  #define V4L2_MBUS_DATA_ACTIVE_HIGH		BIT(8)
  #define V4L2_MBUS_DATA_ACTIVE_LOW		BIT(9)

  /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */

  #define V4L2_MBUS_FIELD_EVEN_HIGH		BIT(10)

  /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */

  #define V4L2_MBUS_FIELD_EVEN_LOW		BIT(11)

  /* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */

  #define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH		BIT(12)
  #define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW		BIT(13)

  #define V4L2_MBUS_DATA_ENABLE_HIGH		BIT(14)
  #define V4L2_MBUS_DATA_ENABLE_LOW		BIT(15)

  
  /* Serial flags */
  /* How many lanes the client can use */

  #define V4L2_MBUS_CSI2_1_LANE			BIT(0)
  #define V4L2_MBUS_CSI2_2_LANE			BIT(1)
  #define V4L2_MBUS_CSI2_3_LANE			BIT(2)
  #define V4L2_MBUS_CSI2_4_LANE			BIT(3)

  /* On which channels it can send video data */

  #define V4L2_MBUS_CSI2_CHANNEL_0		BIT(4)
  #define V4L2_MBUS_CSI2_CHANNEL_1		BIT(5)
  #define V4L2_MBUS_CSI2_CHANNEL_2		BIT(6)
  #define V4L2_MBUS_CSI2_CHANNEL_3		BIT(7)

  /* Does it support only continuous or also non-continuous clock mode */

  #define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		BIT(8)
  #define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	BIT(9)

  #define V4L2_MBUS_CSI2_LANES		(V4L2_MBUS_CSI2_1_LANE | \
  					 V4L2_MBUS_CSI2_2_LANE | \
  					 V4L2_MBUS_CSI2_3_LANE | \
  					 V4L2_MBUS_CSI2_4_LANE)
  #define V4L2_MBUS_CSI2_CHANNELS		(V4L2_MBUS_CSI2_CHANNEL_0 | \
  					 V4L2_MBUS_CSI2_CHANNEL_1 | \
  					 V4L2_MBUS_CSI2_CHANNEL_2 | \
  					 V4L2_MBUS_CSI2_CHANNEL_3)

  
  /**

   * enum v4l2_mbus_type - media bus type

   * @V4L2_MBUS_UNKNOWN:	unknown bus type, no V4L2 mediabus configuration

   * @V4L2_MBUS_PARALLEL:	parallel interface with hsync and vsync
   * @V4L2_MBUS_BT656:	parallel interface with embedded synchronisation, can
   *			also be used for BT.1120

   * @V4L2_MBUS_CSI1:	MIPI CSI-1 serial interface
   * @V4L2_MBUS_CCP2:	CCP2 (Compact Camera Port 2)

   * @V4L2_MBUS_CSI2_DPHY: MIPI CSI-2 serial interface, with D-PHY
   * @V4L2_MBUS_CSI2_CPHY: MIPI CSI-2 serial interface, with C-PHY

   */
  enum v4l2_mbus_type {

  	V4L2_MBUS_UNKNOWN,

  	V4L2_MBUS_PARALLEL,
  	V4L2_MBUS_BT656,

  	V4L2_MBUS_CSI1,
  	V4L2_MBUS_CCP2,

  	V4L2_MBUS_CSI2_DPHY,
  	V4L2_MBUS_CSI2_CPHY,

  };
  
  /**

   * struct v4l2_mbus_config - media bus configuration

   * @type:	in: interface type
   * @flags:	in / out: configuration flags, depending on @type
   */
  struct v4l2_mbus_config {
  	enum v4l2_mbus_type type;
  	unsigned int flags;
  };

  /**
   * v4l2_fill_pix_format - Ancillary routine that fills a &struct
   *	v4l2_pix_format fields from a &struct v4l2_mbus_framefmt.
   *
   * @pix_fmt:	pointer to &struct v4l2_pix_format to be filled
   * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
   */

  static inline void
  v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
  		     const struct v4l2_mbus_framefmt *mbus_fmt)

  {
  	pix_fmt->width = mbus_fmt->width;
  	pix_fmt->height = mbus_fmt->height;
  	pix_fmt->field = mbus_fmt->field;
  	pix_fmt->colorspace = mbus_fmt->colorspace;

  	pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
  	pix_fmt->quantization = mbus_fmt->quantization;

  	pix_fmt->xfer_func = mbus_fmt->xfer_func;

  }

  /**
   * v4l2_fill_pix_format - Ancillary routine that fills a &struct
   *	v4l2_mbus_framefmt from a &struct v4l2_pix_format and a
   *	data format code.
   *
   * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
   * @pix_fmt:	pointer to &struct v4l2_pix_format to be used as model
   * @code:	data format code (from &enum v4l2_mbus_pixelcode)
   */

  static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,

  					 const struct v4l2_pix_format *pix_fmt,

  			   u32 code)

  {
  	mbus_fmt->width = pix_fmt->width;
  	mbus_fmt->height = pix_fmt->height;
  	mbus_fmt->field = pix_fmt->field;
  	mbus_fmt->colorspace = pix_fmt->colorspace;

  	mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc;
  	mbus_fmt->quantization = pix_fmt->quantization;

  	mbus_fmt->xfer_func = pix_fmt->xfer_func;

  	mbus_fmt->code = code;
  }

  /**
   * v4l2_fill_pix_format - Ancillary routine that fills a &struct
   *	v4l2_pix_format_mplane fields from a media bus structure.
   *
   * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be filled
   * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
   */

  static inline void
  v4l2_fill_pix_format_mplane(struct v4l2_pix_format_mplane *pix_mp_fmt,
  			    const struct v4l2_mbus_framefmt *mbus_fmt)

  {
  	pix_mp_fmt->width = mbus_fmt->width;
  	pix_mp_fmt->height = mbus_fmt->height;
  	pix_mp_fmt->field = mbus_fmt->field;
  	pix_mp_fmt->colorspace = mbus_fmt->colorspace;
  	pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
  	pix_mp_fmt->quantization = mbus_fmt->quantization;
  	pix_mp_fmt->xfer_func = mbus_fmt->xfer_func;
  }

  /**
   * v4l2_fill_pix_format - Ancillary routine that fills a &struct
   *	v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane.
   *
   * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
   * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be used as model
   */

  static inline void
  v4l2_fill_mbus_format_mplane(struct v4l2_mbus_framefmt *mbus_fmt,
  			     const struct v4l2_pix_format_mplane *pix_mp_fmt)

  {
  	mbus_fmt->width = pix_mp_fmt->width;
  	mbus_fmt->height = pix_mp_fmt->height;
  	mbus_fmt->field = pix_mp_fmt->field;
  	mbus_fmt->colorspace = pix_mp_fmt->colorspace;
  	mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc;
  	mbus_fmt->quantization = pix_mp_fmt->quantization;
  	mbus_fmt->xfer_func = pix_mp_fmt->xfer_func;
  }

  #endif