#
  # Misc strange devices
  #

  # This one has to live outside of the MISC_DEVICES conditional,
  # because it may be selected by drivers/platform/x86/hp_accel.
  config SENSORS_LIS3LV02D
  	tristate
  	depends on INPUT
  	select INPUT_POLLDEV
  	default n

  menuconfig MISC_DEVICES

  	bool "Misc devices"

  	---help---
  	  Say Y here to get to see options for device drivers from various
  	  different categories. This option alone does not add any kernel code.
  
  	  If you say N, all options in this submenu will be skipped and disabled.

  if MISC_DEVICES

  config AD525X_DPOT

  	tristate "Analog Devices Digital Potentiometers"
  	depends on (I2C || SPI) && SYSFS

  	help
  	  If you say yes here, you get support for the Analog Devices

  	  AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
  	  AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
  	  AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
  	  AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,

  	  AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,

  	  AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,

  	  ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
  	  AD5271, AD5272, AD5274

  	  digital potentiometer chips.
  
  	  See Documentation/misc-devices/ad525x_dpot.txt for the
  	  userspace interface.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ad525x_dpot.

  config AD525X_DPOT_I2C
  	tristate "support I2C bus connection"
  	depends on AD525X_DPOT && I2C
  	help
  	  Say Y here if you have a digital potentiometers hooked to an I2C bus.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ad525x_dpot-i2c.
  
  config AD525X_DPOT_SPI
  	tristate "support SPI bus connection"
  	depends on AD525X_DPOT && SPI_MASTER
  	help
  	  Say Y here if you have a digital potentiometers hooked to an SPI bus.
  
  	  If unsure, say N (but it's safe to say "Y").
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ad525x_dpot-spi.

  config ATMEL_PWM
  	tristate "Atmel AT32/AT91 PWM support"

  	depends on HAVE_CLK

  	help
  	  This option enables device driver support for the PWM channels

  	  on certain Atmel processors.  Pulse Width Modulation is used for
  	  purposes including software controlled power-efficient backlights

  	  on LCD displays, motor control, and waveform generation.

  config AB8500_PWM
  	bool "AB8500 PWM support"

  	depends on AB8500_CORE && ARCH_U8500

  	select HAVE_PWM
  	help
  	  This driver exports functions to enable/disble/config/free Pulse
  	  Width Modulation in the Analog Baseband Chip AB8500.
  	  It is used by led and backlight driver to control the intensity.

  config ATMEL_TCLIB
  	bool "Atmel AT32/AT91 Timer/Counter Library"
  	depends on (AVR32 || ARCH_AT91)
  	help
  	  Select this if you want a library to allocate the Timer/Counter
  	  blocks found on many Atmel processors.  This facilitates using
  	  these blocks by different drivers despite processor differences.

  config ATMEL_TCB_CLKSRC
  	bool "TC Block Clocksource"

  	depends on ATMEL_TCLIB

  	default y
  	help
  	  Select this to get a high precision clocksource based on a
  	  TC block with a 5+ MHz base clock rate.  Two timer channels
  	  are combined to make a single 32-bit timer.
  
  	  When GENERIC_CLOCKEVENTS is defined, the third timer channel
  	  may be used as a clock event device supporting oneshot mode
  	  (delays of up to two seconds) based on the 32 KiHz clock.
  
  config ATMEL_TCB_CLKSRC_BLOCK
  	int
  	depends on ATMEL_TCB_CLKSRC
  	prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
  	default 0
  	range 0 1
  	help
  	  Some chips provide more than one TC block, so you have the
  	  choice of which one to use for the clock framework.  The other
  	  TC can be used for other purposes, such as PWM generation and
  	  interval timing.

  config IBM_ASM
  	tristate "Device driver for IBM RSA service processor"

  	depends on X86 && PCI && INPUT && EXPERIMENTAL

  	---help---
  	  This option enables device driver support for in-band access to the
  	  IBM RSA (Condor) service processor in eServer xSeries systems.
  	  The ibmasm device driver allows user space application to access
  	  ASM (Advanced Systems Management) functions on the service
  	  processor. The driver is meant to be used in conjunction with
  	  a user space API.
  	  The ibmasm driver also enables the OS to use the UART on the
  	  service processor board as a regular serial port. To make use of
  	  this feature serial driver support (CONFIG_SERIAL_8250) must be
  	  enabled.

  	  WARNING: This software may not be supported or function
  	  correctly on your IBM server. Please consult the IBM ServerProven

  	  website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
  	  for information on the specific driver level and support statement

  	  for your IBM server.

  config PHANTOM

  	tristate "Sensable PHANToM (PCI)"

  	depends on PCI
  	help
  	  Say Y here if you want to build a driver for Sensable PHANToM device.

  	  This driver is only for PCI PHANToMs.

  	  If you choose to build module, its name will be phantom. If unsure,
  	  say N here.

  config INTEL_MID_PTI
  	tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"

  	depends on PCI

  	default n
  	help
  	  The PTI (Parallel Trace Interface) driver directs
  	  trace data routed from various parts in the system out
  	  through an Intel Penwell PTI port and out of the mobile
  	  device for analysis with a debugging tool (Lauterbach or Fido).
  
  	  You should select this driver if the target kernel is meant for
  	  an Intel Atom (non-netbook) mobile device containing a MIPI
  	  P1149.7 standard implementation.

  config SGI_IOC4
  	tristate "SGI IOC4 Base IO support"

  	depends on PCI

  	---help---
  	  This option enables basic support for the IOC4 chip on certain
  	  SGI IO controller cards (IO9, IO10, and PCI-RT).  This option
  	  does not enable any specific functions on such a card, but provides
  	  necessary infrastructure for other drivers to utilize.
  
  	  If you have an SGI Altix with an IOC4-based card say Y.
  	  Otherwise say N.

  config TIFM_CORE
  	tristate "TI Flash Media interface support (EXPERIMENTAL)"

  	depends on EXPERIMENTAL && PCI

  	help
  	  If you want support for Texas Instruments(R) Flash Media adapters
  	  you should select this option and then also choose an appropriate
  	  host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
  	  support', if you have a TI PCI74xx compatible card reader, for
  	  example.
  	  You will also have to select some flash card format drivers. MMC/SD
  	  cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
  	  Interface support (MMC_TIFM_SD)'.

  	  To compile this driver as a module, choose M here: the module will

  	  be called tifm_core.

  config TIFM_7XX1
  	tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
  	depends on PCI && TIFM_CORE && EXPERIMENTAL
  	default TIFM_CORE
  	help
  	  This option enables support for Texas Instruments(R) PCI74xx and
  	  PCI76xx families of Flash Media adapters, found in many laptops.
  	  To make actual use of the device, you will have to select some
  	  flash card format drivers, as outlined in the TIFM_CORE Help.

  	  To compile this driver as a module, choose M here: the module will

  	  be called tifm_7xx1.

  config ICS932S401
  	tristate "Integrated Circuits ICS932S401"
  	depends on I2C && EXPERIMENTAL
  	help
  	  If you say yes here you get support for the Integrated Circuits
  	  ICS932S401 clock control chips.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called ics932s401.

  config ATMEL_SSC
  	tristate "Device driver for Atmel SSC peripheral"
  	depends on AVR32 || ARCH_AT91
  	---help---

  	  This option enables device driver support for Atmel Synchronized

  	  Serial Communication peripheral (SSC).
  
  	  The SSC peripheral supports a wide variety of serial frame based
  	  communications, i.e. I2S, SPI, etc.
  
  	  If unsure, say N.

  config ENCLOSURE_SERVICES
  	tristate "Enclosure Services"
  	default n
  	help
  	  Provides support for intelligent enclosures (bays which
  	  contain storage devices).  You also need either a host
  	  driver (SCSI/ATA) which supports enclosures
  	  or a SCSI enclosure device (SES) to use these services.

  config SGI_XP
  	tristate "Support communication between SGI SSIs"

  	depends on NET

  	depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP

  	select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
  	select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2

  	select SGI_GRU if X86_64 && SMP

  	---help---
  	  An SGI machine can be divided into multiple Single System
  	  Images which act independently of each other and have
  	  hardware based memory protection from the others.  Enabling
  	  this feature will allow for direct communication between SSIs
  	  based on a network adapter and DMA messaging.

  config CS5535_MFGPT
  	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"

  	depends on PCI && X86 && MFD_CS5535

  	default n
  	help
  	  This driver provides access to MFGPT functionality for other
  	  drivers that need timers.  MFGPTs are available in the CS5535 and
  	  CS5536 companion chips that are found in AMD Geode and several
  	  other platforms.  They have a better resolution and max interval
  	  than the generic PIT, and are suitable for use as high-res timers.
  	  You probably don't want to enable this manually; other drivers that
  	  make use of it should enable it.
  
  config CS5535_MFGPT_DEFAULT_IRQ
  	int

  	depends on CS5535_MFGPT

  	default 7
  	help
  	  MFGPTs on the CS5535 require an interrupt.  The selected IRQ
  	  can be overridden as a module option as well as by driver that
  	  use the cs5535_mfgpt_ API; however, different architectures might
  	  want to use a different IRQ by default.  This is here for
  	  architectures to set as necessary.

  config CS5535_CLOCK_EVENT_SRC
  	tristate "CS5535/CS5536 high-res timer (MFGPT) events"

  	depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT

  	help
  	  This driver provides a clock event source based on the MFGPT
  	  timer(s) in the CS5535 and CS5536 companion chips.
  	  MFGPTs have a better resolution and max interval than the
  	  generic PIT, and are suitable for use as high-res timers.

  config HP_ILO

  	tristate "Channel interface driver for the HP iLO processor"

  	depends on PCI

  	default n
  	help
  	  The channel interface driver allows applications to communicate

  	  with iLO management processors present on HP ProLiant servers.
  	  Upon loading, the driver creates /dev/hpilo/dXccbN files, which
  	  can be used to gather data from the management processor, via
  	  read and write system calls.

  
  	  To compile this driver as a module, choose M here: the
  	  module will be called hpilo.

  config SGI_GRU
  	tristate "SGI GRU driver"

  	depends on X86_UV && SMP

  	default n
  	select MMU_NOTIFIER
  	---help---
  	The GRU is a hardware resource located in the system chipset. The GRU
  	contains memory that can be mmapped into the user address space. This memory is
  	used to communicate with the GRU to perform functions such as load/store,
  	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
  	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
  	user virtual addresses for operands.
  
  	If you are not running on a SGI UV system, say N.
  
  config SGI_GRU_DEBUG
  	bool  "SGI GRU driver debug"
  	depends on SGI_GRU
  	default n
  	---help---
  	This option enables addition debugging code for the SGI GRU driver. If
  	you are unsure, say N.

  config APDS9802ALS
  	tristate "Medfield Avago APDS9802 ALS Sensor module"
  	depends on I2C
  	help
  	  If you say yes here you get support for the ALS APDS9802 ambient
  	  light sensor.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called apds9802als.

  config ISL29003
  	tristate "Intersil ISL29003 ambient light sensor"
  	depends on I2C && SYSFS
  	help
  	  If you say yes here you get support for the Intersil ISL29003
  	  ambient light sensor.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called isl29003.

  config ISL29020
  	tristate "Intersil ISL29020 ambient light sensor"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Intersil ISL29020
  	  ambient light sensor.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called isl29020.

  config SENSORS_TSL2550
  	tristate "Taos TSL2550 ambient light sensor"
  	depends on I2C && SYSFS
  	help
  	  If you say yes here you get support for the Taos TSL2550
  	  ambient light sensor.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called tsl2550.

  config SENSORS_BH1780
  	tristate "ROHM BH1780GLI ambient light sensor"
  	depends on I2C && SYSFS
  	help
  	  If you say yes here you get support for the ROHM BH1780GLI
  	  ambient light sensor.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called bh1780gli.

  config SENSORS_BH1770
           tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
           depends on I2C
           ---help---
             Say Y here if you want to build a driver for BH1770GLC (ROHM) or
  	   SFH7770 (Osram) combined ambient light and proximity sensor chip.
  
             To compile this driver as a module, choose M here: the
             module will be called bh1770glc. If unsure, say N here.

  config SENSORS_APDS990X
  	 tristate "APDS990X combined als and proximity sensors"
  	 depends on I2C
  	 default n
  	 ---help---
  	   Say Y here if you want to build a driver for Avago APDS990x
  	   combined ambient light and proximity sensor chip.
  
  	   To compile this driver as a module, choose M here: the
  	   module will be called apds990x. If unsure, say N here.

  config HMC6352
  	tristate "Honeywell HMC6352 compass"
  	depends on I2C
  	help
  	  This driver provides support for the Honeywell HMC6352 compass,
  	  providing configuration and heading data via sysfs.

  config EP93XX_PWM
  	tristate "EP93xx PWM support"
  	depends on ARCH_EP93XX
  	help
  	  This option enables device driver support for the PWM channels
  	  on the Cirrus EP93xx processors.  The EP9307 chip only has one
  	  PWM channel all the others have two, the second channel is an
  	  alternate function of the EGPIO14 pin.  A sysfs interface is
  	  provided to control the PWM channels.
  
  	  To compile this driver as a module, choose M here: the module will
  	  be called ep93xx_pwm.

  config DS1682
  	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
  	depends on I2C && EXPERIMENTAL
  	help
  	  If you say yes here you get support for Dallas Semiconductor
  	  DS1682 Total Elapsed Time Recorder.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ds1682.

  config SPEAR13XX_PCIE_GADGET
  	bool "PCIe gadget support for SPEAr13XX platform"
  	depends on ARCH_SPEAR13XX
  	default n
  	help
  	 This option enables gadget support for PCIe controller. If
  	 board file defines any controller as PCIe endpoint then a sysfs
  	 entry will be created for that controller. User can use these
  	 sysfs node to configure PCIe EP as per his requirements.

  config TI_DAC7512
  	tristate "Texas Instruments DAC7512"
  	depends on SPI && SYSFS
  	help
  	  If you say yes here you get support for the Texas Instruments
  	  DAC7512 16-bit digital-to-analog converter.
  
  	  This driver can also be built as a module. If so, the module

  	  will be called ti_dac7512.

  config VMWARE_BALLOON
  	tristate "VMware Balloon Driver"
  	depends on X86
  	help
  	  This is VMware physical memory management driver which acts
  	  like a "balloon" that can be inflated to reclaim physical pages
  	  by reserving them in the guest and invalidating them in the
  	  monitor, freeing up the underlying machine pages so they can
  	  be allocated to other guests. The balloon can also be deflated
  	  to allow the guest to use more physical memory.
  
  	  If unsure, say N.
  
  	  To compile this driver as a module, choose M here: the

  	  module will be called vmw_balloon.

  config ARM_CHARLCD
  	bool "ARM Ltd. Character LCD Driver"
  	depends on PLAT_VERSATILE
  	help
  	  This is a driver for the character LCD found on the ARM Ltd.
  	  Versatile and RealView Platform Baseboards. It doesn't do
  	  very much more than display the text "ARM Linux" on the first
  	  line and the Linux version on the second line, but that's
  	  still useful.

  config BMP085
  	tristate "BMP085 digital pressure sensor"
  	depends on I2C && SYSFS
  	help
  	  If you say yes here you get support for the Bosch Sensortec

  	  BMP085 digital pressure sensor.

  
  	  To compile this driver as a module, choose M here: the
  	  module will be called bmp085.

  config PCH_PHUB

  	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"

  	depends on PCI
  	help
  	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
  	  Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
  	  processor. The Topcliff has MAC address and Option ROM data in SROM.
  	  This driver can access MAC address and Option ROM data in SROM.

  	  This driver also can be used for LAPIS Semiconductor's IOH,
  	  ML7213/ML7223/ML7831.
  	  ML7213 which is for IVI(In-Vehicle Infotainment) use.
  	  ML7223 IOH is for MP(Media Phone) use.
  	  ML7831 IOH is for general purpose use.
  	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
  	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.

  	  To compile this driver as a module, choose M here: the module will
  	  be called pch_phub.

  config USB_SWITCH_FSA9480
  	tristate "FSA9480 USB Switch"
  	depends on I2C
  	help
  	  The FSA9480 is a USB port accessory detector and switch.
  	  The FSA9480 is fully controlled using I2C and enables USB data,
  	  stereo and mono audio, video, microphone and UART data to use
  	  a common connector port.

  config MAX8997_MUIC
  	tristate "MAX8997 MUIC Support"
  	depends on MFD_MAX8997
  	help
  	  If you say yes here you get support for the MUIC device of
  	  Maxim MAX8997 PMIC.
  	  The MAX8997 MUIC is a USB port accessory detector and switch.

  source "drivers/misc/c2port/Kconfig"

  source "drivers/misc/eeprom/Kconfig"

  source "drivers/misc/cb710/Kconfig"

  source "drivers/misc/iwmc3200top/Kconfig"

  source "drivers/misc/ti-st/Kconfig"

  source "drivers/misc/lis3lv02d/Kconfig"

  source "drivers/misc/carma/Kconfig"

  source "drivers/misc/altera-stapl/Kconfig"

  endif # MISC_DEVICES