Blame view
drivers/ata/pata_sc1200.c
7.33 KB
669a5db41 [libata] Add a bu... |
1 |
/* |
ab7716300 ata: Switch all m... |
2 |
* New ATA layer SC1200 driver Alan Cox <alan@lxorguk.ukuu.org.uk> |
669a5db41 [libata] Add a bu... |
3 4 |
* * TODO: Mode selection filtering |
669a5db41 [libata] Add a bu... |
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 |
* TODO: Needs custom DMA cleanup code * * Based very heavily on * * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003 * * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com> * May be copied or modified under the terms of the GNU General Public License * * Development of this chipset driver was funded * by the nice folks at National Semiconductor. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
85cd7251b [libata #pata-dri... |
29 |
* |
669a5db41 [libata] Add a bu... |
30 31 32 33 34 35 36 37 38 39 |
*/ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> |
70f301a67 pata_sc1200: fix ... |
40 |
#define DRV_NAME "pata_sc1200" |
2a3103ce4 [libata] Bump dri... |
41 |
#define DRV_VERSION "0.2.6" |
669a5db41 [libata] Add a bu... |
42 43 44 45 46 47 48 49 50 51 52 53 54 |
#define SC1200_REV_A 0x00 #define SC1200_REV_B1 0x01 #define SC1200_REV_B3 0x02 #define SC1200_REV_C1 0x03 #define SC1200_REV_D1 0x04 /** * sc1200_clock - PCI clock * * Return the PCI bus clocking for the SC1200 chipset configuration * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz */ |
85cd7251b [libata #pata-dri... |
55 |
|
669a5db41 [libata] Add a bu... |
56 57 58 59 60 61 |
static int sc1200_clock(void) { /* Magic registers that give us the chipset data */ u8 chip_id = inb(0x903C); u8 silicon_rev = inb(0x903D); u16 pci_clock; |
85cd7251b [libata #pata-dri... |
62 |
|
669a5db41 [libata] Add a bu... |
63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 |
if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1) return 0; /* 33 MHz mode */ /* Clock generator configuration 0x901E its 8/9 are the PCI clocking 0/3 is 33Mhz 1 is 48 2 is 66 */ pci_clock = inw(0x901E); pci_clock >>= 8; pci_clock &= 0x03; if (pci_clock == 3) pci_clock = 0; return pci_clock; } /** * sc1200_set_piomode - PIO setup * @ap: ATA interface * @adev: device on the interface * * Set our PIO requirements. This is fairly simple on the SC1200 */ |
85cd7251b [libata #pata-dri... |
84 |
|
669a5db41 [libata] Add a bu... |
85 86 87 |
static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const u32 pio_timings[4][5] = { |
d0dd4a016 pata_sc1200: do n... |
88 89 90 91 92 93 94 95 |
/* format0, 33Mhz */ { 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 }, /* format1, 33Mhz */ { 0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010 }, /* format1, 48Mhz */ { 0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021 }, /* format1, 66Mhz */ { 0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131 } |
669a5db41 [libata] Add a bu... |
96 97 98 99 100 101 |
}; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 format; unsigned int reg = 0x40 + 0x10 * ap->port_no; int mode = adev->pio_mode - XFER_PIO_0; |
85cd7251b [libata #pata-dri... |
102 |
|
669a5db41 [libata] Add a bu... |
103 104 105 |
pci_read_config_dword(pdev, reg + 4, &format); format >>= 31; format += sc1200_clock(); |
85cd7251b [libata #pata-dri... |
106 |
pci_write_config_dword(pdev, reg + 8 * adev->devno, |
669a5db41 [libata] Add a bu... |
107 108 109 110 111 112 113 114 115 116 117 |
pio_timings[format][mode]); } /** * sc1200_set_dmamode - DMA timing setup * @ap: ATA interface * @adev: Device being configured * * We cannot mix MWDMA and UDMA without reloading timings each switch * master to slave. */ |
85cd7251b [libata #pata-dri... |
118 |
|
669a5db41 [libata] Add a bu... |
119 120 121 122 123 124 125 |
static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) { static const u32 udma_timing[3][3] = { { 0x00921250, 0x00911140, 0x00911030 }, { 0x00932470, 0x00922260, 0x00922140 }, { 0x009436A1, 0x00933481, 0x00923261 } }; |
85cd7251b [libata #pata-dri... |
126 |
|
669a5db41 [libata] Add a bu... |
127 128 129 130 131 |
static const u32 mwdma_timing[3][3] = { { 0x00077771, 0x00012121, 0x00002020 }, { 0x000BBBB2, 0x00024241, 0x00013131 }, { 0x000FFFF3, 0x00035352, 0x00015151 } }; |
85cd7251b [libata #pata-dri... |
132 |
|
669a5db41 [libata] Add a bu... |
133 134 135 136 137 138 139 140 141 142 |
int clock = sc1200_clock(); struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int reg = 0x40 + 0x10 * ap->port_no; int mode = adev->dma_mode; u32 format; if (mode >= XFER_UDMA_0) format = udma_timing[clock][mode - XFER_UDMA_0]; else format = mwdma_timing[clock][mode - XFER_MW_DMA_0]; |
85cd7251b [libata #pata-dri... |
143 |
|
669a5db41 [libata] Add a bu... |
144 145 |
if (adev->devno == 0) { u32 timings; |
85cd7251b [libata #pata-dri... |
146 |
|
669a5db41 [libata] Add a bu... |
147 148 149 150 151 152 153 154 155 |
pci_read_config_dword(pdev, reg + 4, &timings); timings &= 0x80000000UL; timings |= format; pci_write_config_dword(pdev, reg + 4, timings); } else pci_write_config_dword(pdev, reg + 12, format); } /** |
9363c3825 libata: rename SF... |
156 |
* sc1200_qc_issue - command issue |
669a5db41 [libata] Add a bu... |
157 158 159 160 |
* @qc: command pending * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if |
3a4fa0a25 Fix misspellings ... |
161 |
* necessary. Specifically we have a problem that there is only |
669a5db41 [libata] Add a bu... |
162 163 |
* one MWDMA/UDMA bit. */ |
9363c3825 libata: rename SF... |
164 |
static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc) |
669a5db41 [libata] Add a bu... |
165 166 167 168 169 170 |
{ struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; struct ata_device *prev = ap->private_data; /* See if the DMA settings could be wrong */ |
b15b3ebae libata: Fix a lar... |
171 |
if (ata_dma_enabled(adev) && adev != prev && prev != NULL) { |
669a5db41 [libata] Add a bu... |
172 |
/* Maybe, but do the channels match MWDMA/UDMA ? */ |
b15b3ebae libata: Fix a lar... |
173 174 |
if ((ata_using_udma(adev) && !ata_using_udma(prev)) || (ata_using_udma(prev) && !ata_using_udma(adev))) |
669a5db41 [libata] Add a bu... |
175 176 177 |
/* Switch the mode bits */ sc1200_set_dmamode(ap, adev); } |
360ff7833 libata-sff: separ... |
178 |
return ata_bmdma_qc_issue(qc); |
669a5db41 [libata] Add a bu... |
179 |
} |
c0f2ee34a pata_sc1200: Acti... |
180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 |
/** * sc1200_qc_defer - implement serialization * @qc: command * * Serialize command issue on this controller. */ static int sc1200_qc_defer(struct ata_queued_cmd *qc) { struct ata_host *host = qc->ap->host; struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; int rc; /* First apply the usual rules */ rc = ata_std_qc_defer(qc); if (rc != 0) return rc; /* Now apply serialization rules. Only allow a command if the other channel state machine is idle */ if (alt && alt->qc_active) return ATA_DEFER_PORT; return 0; } |
669a5db41 [libata] Add a bu... |
204 |
static struct scsi_host_template sc1200_sht = { |
68d1d07b5 libata: implement... |
205 206 |
ATA_BMDMA_SHT(DRV_NAME), .sg_tablesize = LIBATA_DUMB_MAX_PRD, |
669a5db41 [libata] Add a bu... |
207 208 209 |
}; static struct ata_port_operations sc1200_port_ops = { |
029cfd6b7 libata: implement... |
210 |
.inherits = &ata_bmdma_port_ops, |
f47451c45 libata-sff: ata_s... |
211 |
.qc_prep = ata_bmdma_dumb_qc_prep, |
9363c3825 libata: rename SF... |
212 |
.qc_issue = sc1200_qc_issue, |
c0f2ee34a pata_sc1200: Acti... |
213 |
.qc_defer = sc1200_qc_defer, |
029cfd6b7 libata: implement... |
214 215 216 |
.cable_detect = ata_cable_40wire, .set_piomode = sc1200_set_piomode, .set_dmamode = sc1200_set_dmamode, |
85cd7251b [libata #pata-dri... |
217 |
}; |
669a5db41 [libata] Add a bu... |
218 219 220 221 222 223 224 225 226 |
/** * sc1200_init_one - Initialise an SC1200 * @dev: PCI device * @id: Entry in match table * * Just throw the needed data at the libata helper and it does all * our work. */ |
85cd7251b [libata #pata-dri... |
227 |
|
669a5db41 [libata] Add a bu... |
228 229 |
static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { |
1626aeb88 libata: clean up ... |
230 |
static const struct ata_port_info info = { |
1d2808fd3 [libata] PATA dri... |
231 |
.flags = ATA_FLAG_SLAVE_POSS, |
14bdef982 [libata] convert ... |
232 233 234 |
.pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, |
669a5db41 [libata] Add a bu... |
235 236 |
.port_ops = &sc1200_port_ops }; |
6d4f950e9 pata_sc1200: Fix ... |
237 |
const struct ata_port_info *ppi[] = { &info, NULL }; |
1626aeb88 libata: clean up ... |
238 |
|
1c5afdf7a libata-sff: separ... |
239 |
return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0); |
669a5db41 [libata] Add a bu... |
240 |
} |
2d2744fc8 [libata] PCI ID t... |
241 242 243 244 |
static const struct pci_device_id sc1200[] = { { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), }, { }, |
669a5db41 [libata] Add a bu... |
245 246 247 |
}; static struct pci_driver sc1200_pci_driver = { |
2d2744fc8 [libata] PCI ID t... |
248 |
.name = DRV_NAME, |
669a5db41 [libata] Add a bu... |
249 250 |
.id_table = sc1200, .probe = sc1200_init_one, |
30ced0f0d [PATCH] PATA liba... |
251 |
.remove = ata_pci_remove_one, |
438ac6d5e libata: add missi... |
252 |
#ifdef CONFIG_PM |
30ced0f0d [PATCH] PATA liba... |
253 254 |
.suspend = ata_pci_device_suspend, .resume = ata_pci_device_resume, |
438ac6d5e libata: add missi... |
255 |
#endif |
669a5db41 [libata] Add a bu... |
256 257 258 259 260 261 |
}; static int __init sc1200_init(void) { return pci_register_driver(&sc1200_pci_driver); } |
669a5db41 [libata] Add a bu... |
262 263 264 265 |
static void __exit sc1200_exit(void) { pci_unregister_driver(&sc1200_pci_driver); } |
669a5db41 [libata] Add a bu... |
266 267 268 269 270 271 272 273 |
MODULE_AUTHOR("Alan Cox, Mark Lord"); MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sc1200); MODULE_VERSION(DRV_VERSION); module_init(sc1200_init); module_exit(sc1200_exit); |