/*
   * vt1211.c - driver for the VIA VT1211 Super-I/O chip integrated hardware
   *            monitoring features
   * Copyright (C) 2006 Juerg Haefliger <juergh@gmail.com>
   *
   * This driver is based on the driver for kernel 2.4 by Mark D. Studebaker
   * and its port to kernel 2.6 by Lars Ekman.
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License as published by
   * the Free Software Foundation; either version 2 of the License, or
   * (at your option) any later version.
   *
   * This program is distributed in the hope that it will be useful,
   * but WITHOUT ANY WARRANTY; without even the implied warranty of
   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   * GNU General Public License for more details.
   *
   * You should have received a copy of the GNU General Public License
   * along with this program; if not, write to the Free Software
   * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
   */

  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

  #include <linux/module.h>
  #include <linux/init.h>
  #include <linux/slab.h>
  #include <linux/jiffies.h>
  #include <linux/platform_device.h>
  #include <linux/hwmon.h>
  #include <linux/hwmon-sysfs.h>
  #include <linux/hwmon-vid.h>
  #include <linux/err.h>
  #include <linux/mutex.h>

  #include <linux/ioport.h>

  #include <linux/acpi.h>

  #include <linux/io.h>

  
  static int uch_config = -1;
  module_param(uch_config, int, 0);
  MODULE_PARM_DESC(uch_config, "Initialize the universal channel configuration");
  
  static int int_mode = -1;
  module_param(int_mode, int, 0);
  MODULE_PARM_DESC(int_mode, "Force the temperature interrupt mode");

  static unsigned short force_id;
  module_param(force_id, ushort, 0);
  MODULE_PARM_DESC(force_id, "Override the detected device ID");

  static struct platform_device *pdev;
  
  #define DRVNAME "vt1211"
  
  /* ---------------------------------------------------------------------
   * Registers
   *
   * The sensors are defined as follows.
   *
   * Sensor          Voltage Mode   Temp Mode   Notes (from the datasheet)
   * --------        ------------   ---------   --------------------------
   * Reading 1                      temp1       Intel thermal diode
   * Reading 3                      temp2       Internal thermal diode
   * UCH1/Reading2   in0            temp3       NTC type thermistor
   * UCH2            in1            temp4       +2.5V
   * UCH3            in2            temp5       VccP
   * UCH4            in3            temp6       +5V
   * UCH5            in4            temp7       +12V
   * 3.3V            in5                        Internal VDD (+3.3V)
   *
   * --------------------------------------------------------------------- */
  
  /* Voltages (in) numbered 0-5 (ix) */
  #define VT1211_REG_IN(ix)		(0x21 + (ix))
  #define VT1211_REG_IN_MIN(ix)		((ix) == 0 ? 0x3e : 0x2a + 2 * (ix))
  #define VT1211_REG_IN_MAX(ix)		((ix) == 0 ? 0x3d : 0x29 + 2 * (ix))
  
  /* Temperatures (temp) numbered 0-6 (ix) */
  static u8 regtemp[]	= {0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25};
  static u8 regtempmax[]	= {0x39, 0x1d, 0x3d, 0x2b, 0x2d, 0x2f, 0x31};
  static u8 regtemphyst[]	= {0x3a, 0x1e, 0x3e, 0x2c, 0x2e, 0x30, 0x32};
  
  /* Fans numbered 0-1 (ix) */
  #define VT1211_REG_FAN(ix)		(0x29 + (ix))
  #define VT1211_REG_FAN_MIN(ix)		(0x3b + (ix))
  #define VT1211_REG_FAN_DIV		 0x47
  
  /* PWMs numbered 0-1 (ix) */
  /* Auto points numbered 0-3 (ap) */
  #define VT1211_REG_PWM(ix)		(0x60 + (ix))
  #define VT1211_REG_PWM_CLK		 0x50
  #define VT1211_REG_PWM_CTL		 0x51
  #define VT1211_REG_PWM_AUTO_TEMP(ap)	(0x55 - (ap))
  #define VT1211_REG_PWM_AUTO_PWM(ix, ap)	(0x58 + 2 * (ix) - (ap))
  
  /* Miscellaneous registers */
  #define VT1211_REG_CONFIG		0x40
  #define VT1211_REG_ALARM1		0x41
  #define VT1211_REG_ALARM2		0x42
  #define VT1211_REG_VID			0x45
  #define VT1211_REG_UCH_CONFIG		0x4a
  #define VT1211_REG_TEMP1_CONFIG		0x4b
  #define VT1211_REG_TEMP2_CONFIG		0x4c
  
  /* In, temp & fan alarm bits */
  static const u8 bitalarmin[]	= {11, 0, 1, 3, 8, 2, 9};
  static const u8 bitalarmtemp[]	= {4, 15, 11, 0, 1, 3, 8};
  static const u8 bitalarmfan[]	= {6, 7};
  
  /* ---------------------------------------------------------------------
   * Data structures and manipulation thereof
   * --------------------------------------------------------------------- */
  
  struct vt1211_data {
  	unsigned short addr;
  	const char *name;

  	struct device *hwmon_dev;

  
  	struct mutex update_lock;
  	char valid;			/* !=0 if following fields are valid */
  	unsigned long last_updated;	/* In jiffies */
  
  	/* Register values */
  	u8  in[6];
  	u8  in_max[6];
  	u8  in_min[6];
  	u8  temp[7];
  	u8  temp_max[7];
  	u8  temp_hyst[7];
  	u8  fan[2];
  	u8  fan_min[2];
  	u8  fan_div[2];
  	u8  fan_ctl;
  	u8  pwm[2];
  	u8  pwm_ctl[2];
  	u8  pwm_clk;
  	u8  pwm_auto_temp[4];
  	u8  pwm_auto_pwm[2][4];
  	u8  vid;		/* Read once at init time */
  	u8  vrm;
  	u8  uch_config;		/* Read once at init time */
  	u16 alarms;
  };
  
  /* ix = [0-5] */
  #define ISVOLT(ix, uch_config)	((ix) > 4 ? 1 : \
  				 !(((uch_config) >> ((ix) + 2)) & 1))
  
  /* ix = [0-6] */
  #define ISTEMP(ix, uch_config)	((ix) < 2 ? 1 : \
  				 ((uch_config) >> (ix)) & 1)

  /*
   * in5 (ix = 5) is special. It's the internal 3.3V so it's scaled in the
   * driver according to the VT1211 BIOS porting guide
   */

  #define IN_FROM_REG(ix, reg)	((reg) < 3 ? 0 : (ix) == 5 ? \
  				 (((reg) - 3) * 15882 + 479) / 958 : \
  				 (((reg) - 3) * 10000 + 479) / 958)

  #define IN_TO_REG(ix, val)	(clamp_val((ix) == 5 ? \

  				 ((val) * 958 + 7941) / 15882 + 3 : \
  				 ((val) * 958 + 5000) / 10000 + 3, 0, 255))

  /*
   * temp1 (ix = 0) is an intel thermal diode which is scaled in user space.
   * temp2 (ix = 1) is the internal temp diode so it's scaled in the driver
   * according to some measurements that I took on an EPIA M10000.
   * temp3-7 are thermistor based so the driver returns the voltage measured at
   * the pin (range 0V - 2.2V).
   */

  #define TEMP_FROM_REG(ix, reg)	((ix) == 0 ? (reg) * 1000 : \
  				 (ix) == 1 ? (reg) < 51 ? 0 : \
  				 ((reg) - 51) * 1000 : \
  				 ((253 - (reg)) * 2200 + 105) / 210)

  #define TEMP_TO_REG(ix, val)	clamp_val( \

  				 ((ix) == 0 ? ((val) + 500) / 1000 : \
  				  (ix) == 1 ? ((val) + 500) / 1000 + 51 : \
  				  253 - ((val) * 210 + 1100) / 2200), 0, 255)
  
  #define DIV_FROM_REG(reg)	(1 << (reg))
  
  #define RPM_FROM_REG(reg, div)	(((reg) == 0) || ((reg) == 255) ? 0 : \
  				 1310720 / (reg) / DIV_FROM_REG(div))
  #define RPM_TO_REG(val, div)	((val) == 0 ? 255 : \

  				 clamp_val((1310720 / (val) / \

  				 DIV_FROM_REG(div)), 1, 254))
  
  /* ---------------------------------------------------------------------
   * Super-I/O constants and functions
   * --------------------------------------------------------------------- */

  /*
   * Configuration index port registers
   * The vt1211 can live at 2 different addresses so we need to probe both
   */

  #define SIO_REG_CIP1		0x2e
  #define SIO_REG_CIP2		0x4e

  
  /* Configuration registers */
  #define SIO_VT1211_LDN		0x07	/* logical device number */
  #define SIO_VT1211_DEVID	0x20	/* device ID */
  #define SIO_VT1211_DEVREV	0x21	/* device revision */
  #define SIO_VT1211_ACTIVE	0x30	/* HW monitor active */
  #define SIO_VT1211_BADDR	0x60	/* base I/O address */
  #define SIO_VT1211_ID		0x3c	/* VT1211 device ID */
  
  /* VT1211 logical device numbers */
  #define SIO_VT1211_LDN_HWMON	0x0b	/* HW monitor */

  static inline void superio_outb(int sio_cip, int reg, int val)

  {

  	outb(reg, sio_cip);
  	outb(val, sio_cip + 1);

  }

  static inline int superio_inb(int sio_cip, int reg)

  {

  	outb(reg, sio_cip);
  	return inb(sio_cip + 1);

  }

  static inline void superio_select(int sio_cip, int ldn)

  {

  	outb(SIO_VT1211_LDN, sio_cip);
  	outb(ldn, sio_cip + 1);

  }

  static inline void superio_enter(int sio_cip)

  {

  	outb(0x87, sio_cip);
  	outb(0x87, sio_cip);

  }

  static inline void superio_exit(int sio_cip)

  {

  	outb(0xaa, sio_cip);

  }
  
  /* ---------------------------------------------------------------------
   * Device I/O access
   * --------------------------------------------------------------------- */
  
  static inline u8 vt1211_read8(struct vt1211_data *data, u8 reg)
  {
  	return inb(data->addr + reg);
  }
  
  static inline void vt1211_write8(struct vt1211_data *data, u8 reg, u8 val)
  {
  	outb(val, data->addr + reg);
  }
  
  static struct vt1211_data *vt1211_update_device(struct device *dev)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  	int ix, val;
  
  	mutex_lock(&data->update_lock);
  
  	/* registers cache is refreshed after 1 second */
  	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
  		/* read VID */
  		data->vid = vt1211_read8(data, VT1211_REG_VID) & 0x1f;
  
  		/* voltage (in) registers */
  		for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
  			if (ISVOLT(ix, data->uch_config)) {
  				data->in[ix] = vt1211_read8(data,
  						VT1211_REG_IN(ix));
  				data->in_min[ix] = vt1211_read8(data,
  						VT1211_REG_IN_MIN(ix));
  				data->in_max[ix] = vt1211_read8(data,
  						VT1211_REG_IN_MAX(ix));
  			}
  		}
  
  		/* temp registers */
  		for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
  			if (ISTEMP(ix, data->uch_config)) {
  				data->temp[ix] = vt1211_read8(data,
  						regtemp[ix]);
  				data->temp_max[ix] = vt1211_read8(data,
  						regtempmax[ix]);
  				data->temp_hyst[ix] = vt1211_read8(data,
  						regtemphyst[ix]);
  			}
  		}
  
  		/* fan & pwm registers */
  		for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) {
  			data->fan[ix] = vt1211_read8(data,
  						VT1211_REG_FAN(ix));
  			data->fan_min[ix] = vt1211_read8(data,
  						VT1211_REG_FAN_MIN(ix));
  			data->pwm[ix] = vt1211_read8(data,
  						VT1211_REG_PWM(ix));
  		}
  		val = vt1211_read8(data, VT1211_REG_FAN_DIV);
  		data->fan_div[0] = (val >> 4) & 3;
  		data->fan_div[1] = (val >> 6) & 3;
  		data->fan_ctl = val & 0xf;
  
  		val = vt1211_read8(data, VT1211_REG_PWM_CTL);
  		data->pwm_ctl[0] = val & 0xf;
  		data->pwm_ctl[1] = (val >> 4) & 0xf;
  
  		data->pwm_clk = vt1211_read8(data, VT1211_REG_PWM_CLK);
  
  		/* pwm & temp auto point registers */
  		data->pwm_auto_pwm[0][1] = vt1211_read8(data,
  						VT1211_REG_PWM_AUTO_PWM(0, 1));
  		data->pwm_auto_pwm[0][2] = vt1211_read8(data,
  						VT1211_REG_PWM_AUTO_PWM(0, 2));
  		data->pwm_auto_pwm[1][1] = vt1211_read8(data,
  						VT1211_REG_PWM_AUTO_PWM(1, 1));
  		data->pwm_auto_pwm[1][2] = vt1211_read8(data,
  						VT1211_REG_PWM_AUTO_PWM(1, 2));
  		for (ix = 0; ix < ARRAY_SIZE(data->pwm_auto_temp); ix++) {
  			data->pwm_auto_temp[ix] = vt1211_read8(data,
  						VT1211_REG_PWM_AUTO_TEMP(ix));
  		}
  
  		/* alarm registers */
  		data->alarms = (vt1211_read8(data, VT1211_REG_ALARM2) << 8) |
  				vt1211_read8(data, VT1211_REG_ALARM1);
  
  		data->last_updated = jiffies;
  		data->valid = 1;
  	}
  
  	mutex_unlock(&data->update_lock);
  
  	return data;
  }
  
  /* ---------------------------------------------------------------------
   * Voltage sysfs interfaces
   * ix = [0-5]
   * --------------------------------------------------------------------- */
  
  #define SHOW_IN_INPUT	0
  #define SHOW_SET_IN_MIN	1
  #define SHOW_SET_IN_MAX	2
  #define SHOW_IN_ALARM	3
  
  static ssize_t show_in(struct device *dev, struct device_attribute *attr,
  		       char *buf)
  {
  	struct vt1211_data *data = vt1211_update_device(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int fn = sensor_attr_2->nr;
  	int res;
  
  	switch (fn) {
  	case SHOW_IN_INPUT:
  		res = IN_FROM_REG(ix, data->in[ix]);
  		break;
  	case SHOW_SET_IN_MIN:
  		res = IN_FROM_REG(ix, data->in_min[ix]);
  		break;
  	case SHOW_SET_IN_MAX:
  		res = IN_FROM_REG(ix, data->in_max[ix]);
  		break;
  	case SHOW_IN_ALARM:
  		res = (data->alarms >> bitalarmin[ix]) & 1;
  		break;
  	default:
  		res = 0;
  		dev_dbg(dev, "Unknown attr fetch (%d)
  ", fn);
  	}
  
  	return sprintf(buf, "%d
  ", res);
  }
  
  static ssize_t set_in(struct device *dev, struct device_attribute *attr,
  		      const char *buf, size_t count)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int fn = sensor_attr_2->nr;

  	long val;
  	int err;
  
  	err = kstrtol(buf, 10, &val);
  	if (err)
  		return err;

  
  	mutex_lock(&data->update_lock);
  	switch (fn) {
  	case SHOW_SET_IN_MIN:
  		data->in_min[ix] = IN_TO_REG(ix, val);
  		vt1211_write8(data, VT1211_REG_IN_MIN(ix), data->in_min[ix]);
  		break;
  	case SHOW_SET_IN_MAX:
  		data->in_max[ix] = IN_TO_REG(ix, val);
  		vt1211_write8(data, VT1211_REG_IN_MAX(ix), data->in_max[ix]);
  		break;
  	default:
  		dev_dbg(dev, "Unknown attr fetch (%d)
  ", fn);
  	}
  	mutex_unlock(&data->update_lock);
  
  	return count;
  }
  
  /* ---------------------------------------------------------------------
   * Temperature sysfs interfaces
   * ix = [0-6]
   * --------------------------------------------------------------------- */
  
  #define SHOW_TEMP_INPUT		0
  #define SHOW_SET_TEMP_MAX	1
  #define SHOW_SET_TEMP_MAX_HYST	2
  #define SHOW_TEMP_ALARM		3
  
  static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
  			 char *buf)
  {
  	struct vt1211_data *data = vt1211_update_device(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int fn = sensor_attr_2->nr;
  	int res;
  
  	switch (fn) {
  	case SHOW_TEMP_INPUT:
  		res = TEMP_FROM_REG(ix, data->temp[ix]);
  		break;
  	case SHOW_SET_TEMP_MAX:
  		res = TEMP_FROM_REG(ix, data->temp_max[ix]);
  		break;
  	case SHOW_SET_TEMP_MAX_HYST:
  		res = TEMP_FROM_REG(ix, data->temp_hyst[ix]);
  		break;
  	case SHOW_TEMP_ALARM:
  		res = (data->alarms >> bitalarmtemp[ix]) & 1;
  		break;
  	default:
  		res = 0;
  		dev_dbg(dev, "Unknown attr fetch (%d)
  ", fn);
  	}
  
  	return sprintf(buf, "%d
  ", res);
  }
  
  static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
  			const char *buf, size_t count)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int fn = sensor_attr_2->nr;

  	long val;
  	int err;
  
  	err = kstrtol(buf, 10, &val);
  	if (err)
  		return err;

  
  	mutex_lock(&data->update_lock);
  	switch (fn) {
  	case SHOW_SET_TEMP_MAX:
  		data->temp_max[ix] = TEMP_TO_REG(ix, val);
  		vt1211_write8(data, regtempmax[ix],
  			      data->temp_max[ix]);
  		break;
  	case SHOW_SET_TEMP_MAX_HYST:
  		data->temp_hyst[ix] = TEMP_TO_REG(ix, val);
  		vt1211_write8(data, regtemphyst[ix],
  			      data->temp_hyst[ix]);
  		break;
  	default:
  		dev_dbg(dev, "Unknown attr fetch (%d)
  ", fn);
  	}
  	mutex_unlock(&data->update_lock);
  
  	return count;
  }
  
  /* ---------------------------------------------------------------------
   * Fan sysfs interfaces
   * ix = [0-1]
   * --------------------------------------------------------------------- */
  
  #define SHOW_FAN_INPUT		0
  #define SHOW_SET_FAN_MIN	1
  #define SHOW_SET_FAN_DIV	2
  #define SHOW_FAN_ALARM		3
  
  static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
  			char *buf)
  {
  	struct vt1211_data *data = vt1211_update_device(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int fn = sensor_attr_2->nr;
  	int res;
  
  	switch (fn) {
  	case SHOW_FAN_INPUT:
  		res = RPM_FROM_REG(data->fan[ix], data->fan_div[ix]);
  		break;
  	case SHOW_SET_FAN_MIN:
  		res = RPM_FROM_REG(data->fan_min[ix], data->fan_div[ix]);
  		break;
  	case SHOW_SET_FAN_DIV:
  		res = DIV_FROM_REG(data->fan_div[ix]);
  		break;
  	case SHOW_FAN_ALARM:
  		res = (data->alarms >> bitalarmfan[ix]) & 1;
  		break;
  	default:
  		res = 0;
  		dev_dbg(dev, "Unknown attr fetch (%d)
  ", fn);
  	}
  
  	return sprintf(buf, "%d
  ", res);
  }
  
  static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
  		       const char *buf, size_t count)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int fn = sensor_attr_2->nr;

  	int reg;

  	unsigned long val;
  	int err;
  
  	err = kstrtoul(buf, 10, &val);
  	if (err)
  		return err;

  
  	mutex_lock(&data->update_lock);
  
  	/* sync the data cache */
  	reg = vt1211_read8(data, VT1211_REG_FAN_DIV);
  	data->fan_div[0] = (reg >> 4) & 3;
  	data->fan_div[1] = (reg >> 6) & 3;
  	data->fan_ctl = reg & 0xf;
  
  	switch (fn) {
  	case SHOW_SET_FAN_MIN:
  		data->fan_min[ix] = RPM_TO_REG(val, data->fan_div[ix]);
  		vt1211_write8(data, VT1211_REG_FAN_MIN(ix),
  			      data->fan_min[ix]);
  		break;
  	case SHOW_SET_FAN_DIV:
  		switch (val) {

  		case 1:
  			data->fan_div[ix] = 0;
  			break;
  		case 2:
  			data->fan_div[ix] = 1;
  			break;
  		case 4:
  			data->fan_div[ix] = 2;
  			break;
  		case 8:
  			data->fan_div[ix] = 3;
  			break;
  		default:
  			count = -EINVAL;

  			dev_warn(dev,
  				 "fan div value %ld not supported. Choose one of 1, 2, 4, or 8.
  ",
  				 val);

  			goto EXIT;

  		}
  		vt1211_write8(data, VT1211_REG_FAN_DIV,
  			      ((data->fan_div[1] << 6) |
  			       (data->fan_div[0] << 4) |
  				data->fan_ctl));
  		break;
  	default:
  		dev_dbg(dev, "Unknown attr fetch (%d)
  ", fn);
  	}
  
  EXIT:
  	mutex_unlock(&data->update_lock);
  	return count;
  }
  
  /* ---------------------------------------------------------------------
   * PWM sysfs interfaces
   * ix = [0-1]
   * --------------------------------------------------------------------- */
  
  #define SHOW_PWM			0
  #define SHOW_SET_PWM_ENABLE		1
  #define SHOW_SET_PWM_FREQ		2
  #define SHOW_SET_PWM_AUTO_CHANNELS_TEMP	3
  
  static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
  			char *buf)
  {
  	struct vt1211_data *data = vt1211_update_device(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int fn = sensor_attr_2->nr;
  	int res;
  
  	switch (fn) {
  	case SHOW_PWM:
  		res = data->pwm[ix];
  		break;
  	case SHOW_SET_PWM_ENABLE:
  		res = ((data->pwm_ctl[ix] >> 3) & 1) ? 2 : 0;
  		break;
  	case SHOW_SET_PWM_FREQ:
  		res = 90000 >> (data->pwm_clk & 7);
  		break;
  	case SHOW_SET_PWM_AUTO_CHANNELS_TEMP:
  		res = (data->pwm_ctl[ix] & 7) + 1;
  		break;
  	default:
  		res = 0;
  		dev_dbg(dev, "Unknown attr fetch (%d)
  ", fn);
  	}
  
  	return sprintf(buf, "%d
  ", res);
  }
  
  static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
  		       const char *buf, size_t count)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int fn = sensor_attr_2->nr;

  	int tmp, reg;

  	unsigned long val;
  	int err;
  
  	err = kstrtoul(buf, 10, &val);
  	if (err)
  		return err;

  
  	mutex_lock(&data->update_lock);
  
  	switch (fn) {
  	case SHOW_SET_PWM_ENABLE:
  		/* sync the data cache */
  		reg = vt1211_read8(data, VT1211_REG_FAN_DIV);
  		data->fan_div[0] = (reg >> 4) & 3;
  		data->fan_div[1] = (reg >> 6) & 3;
  		data->fan_ctl = reg & 0xf;
  		reg = vt1211_read8(data, VT1211_REG_PWM_CTL);
  		data->pwm_ctl[0] = reg & 0xf;
  		data->pwm_ctl[1] = (reg >> 4) & 0xf;
  		switch (val) {
  		case 0:
  			data->pwm_ctl[ix] &= 7;

  			/*
  			 * disable SmartGuardian if both PWM outputs are
  			 * disabled
  			 */
  			if ((data->pwm_ctl[ix ^ 1] & 1) == 0)

  				data->fan_ctl &= 0xe;

  			break;
  		case 2:
  			data->pwm_ctl[ix] |= 8;
  			data->fan_ctl |= 1;
  			break;
  		default:
  			count = -EINVAL;

  			dev_warn(dev,
  				 "pwm mode %ld not supported. Choose one of 0 or 2.
  ",
  				 val);

  			goto EXIT;
  		}
  		vt1211_write8(data, VT1211_REG_PWM_CTL,
  			      ((data->pwm_ctl[1] << 4) |
  				data->pwm_ctl[0]));
  		vt1211_write8(data, VT1211_REG_FAN_DIV,
  			      ((data->fan_div[1] << 6) |
  			       (data->fan_div[0] << 4) |
  				data->fan_ctl));
  		break;
  	case SHOW_SET_PWM_FREQ:

  		val = 135000 / clamp_val(val, 135000 >> 7, 135000);

  		/* calculate tmp = log2(val) */
  		tmp = 0;

  		for (val >>= 1; val > 0; val >>= 1)

  			tmp++;

  		/* sync the data cache */
  		reg = vt1211_read8(data, VT1211_REG_PWM_CLK);
  		data->pwm_clk = (reg & 0xf8) | tmp;
  		vt1211_write8(data, VT1211_REG_PWM_CLK, data->pwm_clk);
  		break;
  	case SHOW_SET_PWM_AUTO_CHANNELS_TEMP:

  		if (val < 1 || val > 7) {

  			count = -EINVAL;

  			dev_warn(dev,
  				 "temp channel %ld not supported. Choose a value between 1 and 7.
  ",
  				 val);

  			goto EXIT;
  		}
  		if (!ISTEMP(val - 1, data->uch_config)) {
  			count = -EINVAL;
  			dev_warn(dev, "temp channel %ld is not available.
  ",
  				 val);
  			goto EXIT;
  		}
  		/* sync the data cache */
  		reg = vt1211_read8(data, VT1211_REG_PWM_CTL);
  		data->pwm_ctl[0] = reg & 0xf;
  		data->pwm_ctl[1] = (reg >> 4) & 0xf;
  		data->pwm_ctl[ix] = (data->pwm_ctl[ix] & 8) | (val - 1);
  		vt1211_write8(data, VT1211_REG_PWM_CTL,
  			      ((data->pwm_ctl[1] << 4) | data->pwm_ctl[0]));
  		break;
  	default:
  		dev_dbg(dev, "Unknown attr fetch (%d)
  ", fn);
  	}
  
  EXIT:
  	mutex_unlock(&data->update_lock);
  	return count;
  }
  
  /* ---------------------------------------------------------------------
   * PWM auto point definitions
   * ix = [0-1]
   * ap = [0-3]
   * --------------------------------------------------------------------- */
  
  /*
   * pwm[ix+1]_auto_point[ap+1]_temp mapping table:
   * Note that there is only a single set of temp auto points that controls both
   * PWM controllers. We still create 2 sets of sysfs files to make it look
   * more consistent even though they map to the same registers.
   *
   * ix ap : description
   * -------------------
   * 0  0  : pwm1/2 off temperature        (pwm_auto_temp[0])
   * 0  1  : pwm1/2 low speed temperature  (pwm_auto_temp[1])
   * 0  2  : pwm1/2 high speed temperature (pwm_auto_temp[2])
   * 0  3  : pwm1/2 full speed temperature (pwm_auto_temp[3])
   * 1  0  : pwm1/2 off temperature        (pwm_auto_temp[0])
   * 1  1  : pwm1/2 low speed temperature  (pwm_auto_temp[1])
   * 1  2  : pwm1/2 high speed temperature (pwm_auto_temp[2])
   * 1  3  : pwm1/2 full speed temperature (pwm_auto_temp[3])
   */
  
  static ssize_t show_pwm_auto_point_temp(struct device *dev,
  					struct device_attribute *attr,
  					char *buf)
  {
  	struct vt1211_data *data = vt1211_update_device(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int ap = sensor_attr_2->nr;
  
  	return sprintf(buf, "%d
  ", TEMP_FROM_REG(data->pwm_ctl[ix] & 7,
  		       data->pwm_auto_temp[ap]));
  }
  
  static ssize_t set_pwm_auto_point_temp(struct device *dev,
  				       struct device_attribute *attr,
  				       const char *buf, size_t count)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int ap = sensor_attr_2->nr;

  	int reg;

  	long val;
  	int err;
  
  	err = kstrtol(buf, 10, &val);
  	if (err)
  		return err;

  
  	mutex_lock(&data->update_lock);
  
  	/* sync the data cache */
  	reg = vt1211_read8(data, VT1211_REG_PWM_CTL);
  	data->pwm_ctl[0] = reg & 0xf;
  	data->pwm_ctl[1] = (reg >> 4) & 0xf;
  
  	data->pwm_auto_temp[ap] = TEMP_TO_REG(data->pwm_ctl[ix] & 7, val);
  	vt1211_write8(data, VT1211_REG_PWM_AUTO_TEMP(ap),
  		      data->pwm_auto_temp[ap]);
  	mutex_unlock(&data->update_lock);
  
  	return count;
  }
  
  /*
   * pwm[ix+1]_auto_point[ap+1]_pwm mapping table:
   * Note that the PWM auto points 0 & 3 are hard-wired in the VT1211 and can't
   * be changed.
   *
   * ix ap : description
   * -------------------
   * 0  0  : pwm1 off                   (pwm_auto_pwm[0][0], hard-wired to 0)
   * 0  1  : pwm1 low speed duty cycle  (pwm_auto_pwm[0][1])
   * 0  2  : pwm1 high speed duty cycle (pwm_auto_pwm[0][2])
   * 0  3  : pwm1 full speed            (pwm_auto_pwm[0][3], hard-wired to 255)
   * 1  0  : pwm2 off                   (pwm_auto_pwm[1][0], hard-wired to 0)
   * 1  1  : pwm2 low speed duty cycle  (pwm_auto_pwm[1][1])
   * 1  2  : pwm2 high speed duty cycle (pwm_auto_pwm[1][2])
   * 1  3  : pwm2 full speed            (pwm_auto_pwm[1][3], hard-wired to 255)

   */

  
  static ssize_t show_pwm_auto_point_pwm(struct device *dev,
  				       struct device_attribute *attr,
  				       char *buf)
  {
  	struct vt1211_data *data = vt1211_update_device(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int ap = sensor_attr_2->nr;
  
  	return sprintf(buf, "%d
  ", data->pwm_auto_pwm[ix][ap]);
  }
  
  static ssize_t set_pwm_auto_point_pwm(struct device *dev,
  				      struct device_attribute *attr,
  				      const char *buf, size_t count)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  	struct sensor_device_attribute_2 *sensor_attr_2 =
  						to_sensor_dev_attr_2(attr);
  	int ix = sensor_attr_2->index;
  	int ap = sensor_attr_2->nr;

  	unsigned long val;
  	int err;

  	err = kstrtoul(buf, 10, &val);
  	if (err)
  		return err;

  
  	mutex_lock(&data->update_lock);

  	data->pwm_auto_pwm[ix][ap] = clamp_val(val, 0, 255);

  	vt1211_write8(data, VT1211_REG_PWM_AUTO_PWM(ix, ap),
  		      data->pwm_auto_pwm[ix][ap]);
  	mutex_unlock(&data->update_lock);
  
  	return count;
  }
  
  /* ---------------------------------------------------------------------
   * Miscellaneous sysfs interfaces (VRM, VID, name, and (legacy) alarms)
   * --------------------------------------------------------------------- */
  
  static ssize_t show_vrm(struct device *dev, struct device_attribute *attr,
  			char *buf)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  
  	return sprintf(buf, "%d
  ", data->vrm);
  }
  
  static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
  		       const char *buf, size_t count)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);

  	unsigned long val;
  	int err;
  
  	err = kstrtoul(buf, 10, &val);
  	if (err)
  		return err;

  	if (val > 255)
  		return -EINVAL;

  	data->vrm = val;
  
  	return count;
  }
  
  static ssize_t show_vid(struct device *dev, struct device_attribute *attr,
  			char *buf)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  
  	return sprintf(buf, "%d
  ", vid_from_reg(data->vid, data->vrm));
  }
  
  static ssize_t show_name(struct device *dev,
  			 struct device_attribute *attr, char *buf)
  {
  	struct vt1211_data *data = dev_get_drvdata(dev);
  
  	return sprintf(buf, "%s
  ", data->name);
  }
  
  static ssize_t show_alarms(struct device *dev,
  			   struct device_attribute *attr, char *buf)
  {
  	struct vt1211_data *data = vt1211_update_device(dev);
  
  	return sprintf(buf, "%d
  ", data->alarms);
  }
  
  /* ---------------------------------------------------------------------
   * Device attribute structs
   * --------------------------------------------------------------------- */

  #define SENSOR_ATTR_IN(ix) \
  {	SENSOR_ATTR_2(in##ix##_input, S_IRUGO, \
  		show_in, NULL, SHOW_IN_INPUT, ix), \

  	SENSOR_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \

  		show_in, set_in, SHOW_SET_IN_MIN, ix), \

  	SENSOR_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \

  		show_in, set_in, SHOW_SET_IN_MAX, ix), \
  	SENSOR_ATTR_2(in##ix##_alarm, S_IRUGO, \
  		show_in, NULL, SHOW_IN_ALARM, ix) \
  }
  
  static struct sensor_device_attribute_2 vt1211_sysfs_in[][4] = {
  	SENSOR_ATTR_IN(0),
  	SENSOR_ATTR_IN(1),
  	SENSOR_ATTR_IN(2),
  	SENSOR_ATTR_IN(3),
  	SENSOR_ATTR_IN(4),
  	SENSOR_ATTR_IN(5)

  };

  #define IN_UNIT_ATTRS(X)			\
  {	&vt1211_sysfs_in[X][0].dev_attr.attr,	\
  	&vt1211_sysfs_in[X][1].dev_attr.attr,	\
  	&vt1211_sysfs_in[X][2].dev_attr.attr,	\
  	&vt1211_sysfs_in[X][3].dev_attr.attr,	\
  	NULL					\
  }
  
  static struct attribute *vt1211_in_attr[][5] = {
  	IN_UNIT_ATTRS(0),
  	IN_UNIT_ATTRS(1),
  	IN_UNIT_ATTRS(2),
  	IN_UNIT_ATTRS(3),
  	IN_UNIT_ATTRS(4),
  	IN_UNIT_ATTRS(5)

  };

  static const struct attribute_group vt1211_in_attr_group[] = {
  	{ .attrs = vt1211_in_attr[0] },
  	{ .attrs = vt1211_in_attr[1] },
  	{ .attrs = vt1211_in_attr[2] },
  	{ .attrs = vt1211_in_attr[3] },
  	{ .attrs = vt1211_in_attr[4] },
  	{ .attrs = vt1211_in_attr[5] }

  };

  #define SENSOR_ATTR_TEMP(ix) \
  {	SENSOR_ATTR_2(temp##ix##_input, S_IRUGO, \
  		show_temp, NULL, SHOW_TEMP_INPUT, ix-1), \

  	SENSOR_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \

  		show_temp, set_temp, SHOW_SET_TEMP_MAX, ix-1), \
  	SENSOR_ATTR_2(temp##ix##_max_hyst, S_IRUGO | S_IWUSR, \
  		show_temp, set_temp, SHOW_SET_TEMP_MAX_HYST, ix-1), \
  	SENSOR_ATTR_2(temp##ix##_alarm, S_IRUGO, \
  		show_temp, NULL, SHOW_TEMP_ALARM, ix-1) \
  }
  
  static struct sensor_device_attribute_2 vt1211_sysfs_temp[][4] = {
  	SENSOR_ATTR_TEMP(1),
  	SENSOR_ATTR_TEMP(2),
  	SENSOR_ATTR_TEMP(3),
  	SENSOR_ATTR_TEMP(4),
  	SENSOR_ATTR_TEMP(5),
  	SENSOR_ATTR_TEMP(6),
  	SENSOR_ATTR_TEMP(7),

  };

  #define TEMP_UNIT_ATTRS(X)			\
  {	&vt1211_sysfs_temp[X][0].dev_attr.attr,	\
  	&vt1211_sysfs_temp[X][1].dev_attr.attr,	\
  	&vt1211_sysfs_temp[X][2].dev_attr.attr,	\
  	&vt1211_sysfs_temp[X][3].dev_attr.attr,	\
  	NULL					\
  }
  
  static struct attribute *vt1211_temp_attr[][5] = {
  	TEMP_UNIT_ATTRS(0),
  	TEMP_UNIT_ATTRS(1),
  	TEMP_UNIT_ATTRS(2),
  	TEMP_UNIT_ATTRS(3),
  	TEMP_UNIT_ATTRS(4),
  	TEMP_UNIT_ATTRS(5),
  	TEMP_UNIT_ATTRS(6)

  };

  static const struct attribute_group vt1211_temp_attr_group[] = {
  	{ .attrs = vt1211_temp_attr[0] },
  	{ .attrs = vt1211_temp_attr[1] },
  	{ .attrs = vt1211_temp_attr[2] },
  	{ .attrs = vt1211_temp_attr[3] },
  	{ .attrs = vt1211_temp_attr[4] },
  	{ .attrs = vt1211_temp_attr[5] },
  	{ .attrs = vt1211_temp_attr[6] }

  };
  
  #define SENSOR_ATTR_FAN(ix) \
  	SENSOR_ATTR_2(fan##ix##_input, S_IRUGO, \
  		show_fan, NULL, SHOW_FAN_INPUT, ix-1), \
  	SENSOR_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
  		show_fan, set_fan, SHOW_SET_FAN_MIN, ix-1), \
  	SENSOR_ATTR_2(fan##ix##_div, S_IRUGO | S_IWUSR, \
  		show_fan, set_fan, SHOW_SET_FAN_DIV, ix-1), \
  	SENSOR_ATTR_2(fan##ix##_alarm, S_IRUGO, \
  		show_fan, NULL, SHOW_FAN_ALARM, ix-1)
  
  #define SENSOR_ATTR_PWM(ix) \
  	SENSOR_ATTR_2(pwm##ix, S_IRUGO, \
  		show_pwm, NULL, SHOW_PWM, ix-1), \
  	SENSOR_ATTR_2(pwm##ix##_enable, S_IRUGO | S_IWUSR, \
  		show_pwm, set_pwm, SHOW_SET_PWM_ENABLE, ix-1), \
  	SENSOR_ATTR_2(pwm##ix##_auto_channels_temp, S_IRUGO | S_IWUSR, \
  		show_pwm, set_pwm, SHOW_SET_PWM_AUTO_CHANNELS_TEMP, ix-1)
  
  #define SENSOR_ATTR_PWM_FREQ(ix) \
  	SENSOR_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
  		show_pwm, set_pwm, SHOW_SET_PWM_FREQ, ix-1)
  
  #define SENSOR_ATTR_PWM_FREQ_RO(ix) \
  	SENSOR_ATTR_2(pwm##ix##_freq, S_IRUGO, \
  		show_pwm, NULL, SHOW_SET_PWM_FREQ, ix-1)
  
  #define SENSOR_ATTR_PWM_AUTO_POINT_TEMP(ix, ap) \
  	SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_temp, S_IRUGO | S_IWUSR, \
  		show_pwm_auto_point_temp, set_pwm_auto_point_temp, \
  		ap-1, ix-1)
  
  #define SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(ix, ap) \
  	SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_temp, S_IRUGO, \
  		show_pwm_auto_point_temp, NULL, \
  		ap-1, ix-1)
  
  #define SENSOR_ATTR_PWM_AUTO_POINT_PWM(ix, ap) \
  	SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_pwm, S_IRUGO | S_IWUSR, \
  		show_pwm_auto_point_pwm, set_pwm_auto_point_pwm, \
  		ap-1, ix-1)
  
  #define SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(ix, ap) \
  	SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_pwm, S_IRUGO, \
  		show_pwm_auto_point_pwm, NULL, \
  		ap-1, ix-1)
  
  static struct sensor_device_attribute_2 vt1211_sysfs_fan_pwm[] = {
  	SENSOR_ATTR_FAN(1),
  	SENSOR_ATTR_FAN(2),
  	SENSOR_ATTR_PWM(1),
  	SENSOR_ATTR_PWM(2),
  	SENSOR_ATTR_PWM_FREQ(1),
  	SENSOR_ATTR_PWM_FREQ_RO(2),
  	SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 1),
  	SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 2),
  	SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 3),
  	SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 4),
  	SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 1),
  	SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 2),
  	SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 3),
  	SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 4),
  	SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(1, 1),
  	SENSOR_ATTR_PWM_AUTO_POINT_PWM(1, 2),
  	SENSOR_ATTR_PWM_AUTO_POINT_PWM(1, 3),
  	SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(1, 4),
  	SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(2, 1),
  	SENSOR_ATTR_PWM_AUTO_POINT_PWM(2, 2),
  	SENSOR_ATTR_PWM_AUTO_POINT_PWM(2, 3),
  	SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(2, 4),
  };
  
  static struct device_attribute vt1211_sysfs_misc[] = {
  	__ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm),
  	__ATTR(cpu0_vid, S_IRUGO, show_vid, NULL),
  	__ATTR(name, S_IRUGO, show_name, NULL),
  	__ATTR(alarms, S_IRUGO, show_alarms, NULL),
  };
  
  /* ---------------------------------------------------------------------
   * Device registration and initialization
   * --------------------------------------------------------------------- */

  static void vt1211_init_device(struct vt1211_data *data)

  {
  	/* set VRM */
  	data->vrm = vid_which_vrm();
  
  	/* Read (and initialize) UCH config */
  	data->uch_config = vt1211_read8(data, VT1211_REG_UCH_CONFIG);
  	if (uch_config > -1) {
  		data->uch_config = (data->uch_config & 0x83) |
  				   (uch_config << 2);
  		vt1211_write8(data, VT1211_REG_UCH_CONFIG, data->uch_config);
  	}

  	/*
  	 * Initialize the interrupt mode (if request at module load time).

  	 * The VT1211 implements 3 different modes for clearing interrupts:
  	 * 0: Clear INT when status register is read. Regenerate INT as long
  	 *    as temp stays above hysteresis limit.
  	 * 1: Clear INT when status register is read. DON'T regenerate INT
  	 *    until temp falls below hysteresis limit and exceeds hot limit
  	 *    again.
  	 * 2: Clear INT when temp falls below max limit.
  	 *
  	 * The driver only allows to force mode 0 since that's the only one

  	 * that makes sense for 'sensors'
  	 */

  	if (int_mode == 0) {
  		vt1211_write8(data, VT1211_REG_TEMP1_CONFIG, 0);
  		vt1211_write8(data, VT1211_REG_TEMP2_CONFIG, 0);
  	}
  
  	/* Fill in some hard wired values into our data struct */
  	data->pwm_auto_pwm[0][3] = 255;
  	data->pwm_auto_pwm[1][3] = 255;
  }
  
  static void vt1211_remove_sysfs(struct platform_device *pdev)
  {
  	struct device *dev = &pdev->dev;
  	int i;

  	for (i = 0; i < ARRAY_SIZE(vt1211_in_attr_group); i++)
  		sysfs_remove_group(&dev->kobj, &vt1211_in_attr_group[i]);
  
  	for (i = 0; i < ARRAY_SIZE(vt1211_temp_attr_group); i++)
  		sysfs_remove_group(&dev->kobj, &vt1211_temp_attr_group[i]);

  	for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_fan_pwm); i++) {
  		device_remove_file(dev,
  			&vt1211_sysfs_fan_pwm[i].dev_attr);
  	}

  	for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++)

  		device_remove_file(dev, &vt1211_sysfs_misc[i]);

  }

  static int vt1211_probe(struct platform_device *pdev)

  {
  	struct device *dev = &pdev->dev;
  	struct vt1211_data *data;
  	struct resource *res;
  	int i, err;

  	data = devm_kzalloc(dev, sizeof(struct vt1211_data), GFP_KERNEL);

  	if (!data)

  		return -ENOMEM;

  
  	res = platform_get_resource(pdev, IORESOURCE_IO, 0);

  	if (!devm_request_region(dev, res->start, resource_size(res),
  				 DRVNAME)) {

  		dev_err(dev, "Failed to request region 0x%lx-0x%lx
  ",
  			(unsigned long)res->start, (unsigned long)res->end);

  		return -EBUSY;

  	}

  	data->addr = res->start;
  	data->name = DRVNAME;
  	mutex_init(&data->update_lock);
  
  	platform_set_drvdata(pdev, data);
  
  	/* Initialize the VT1211 chip */
  	vt1211_init_device(data);
  
  	/* Create sysfs interface files */

  	for (i = 0; i < ARRAY_SIZE(vt1211_in_attr_group); i++) {

  		if (ISVOLT(i, data->uch_config)) {

  			err = sysfs_create_group(&dev->kobj,
  						 &vt1211_in_attr_group[i]);
  			if (err)

  				goto EXIT_DEV_REMOVE;

  		}
  	}

  	for (i = 0; i < ARRAY_SIZE(vt1211_temp_attr_group); i++) {

  		if (ISTEMP(i, data->uch_config)) {

  			err = sysfs_create_group(&dev->kobj,
  						 &vt1211_temp_attr_group[i]);
  			if (err)

  				goto EXIT_DEV_REMOVE;

  		}
  	}
  	for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_fan_pwm); i++) {
  		err = device_create_file(dev,
  			&vt1211_sysfs_fan_pwm[i].dev_attr);

  		if (err)

  			goto EXIT_DEV_REMOVE;

  	}
  	for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++) {
  		err = device_create_file(dev,
  		       &vt1211_sysfs_misc[i]);

  		if (err)

  			goto EXIT_DEV_REMOVE;

  	}
  
  	/* Register device */

  	data->hwmon_dev = hwmon_device_register(dev);
  	if (IS_ERR(data->hwmon_dev)) {
  		err = PTR_ERR(data->hwmon_dev);

  		dev_err(dev, "Class registration failed (%d)
  ", err);
  		goto EXIT_DEV_REMOVE_SILENT;
  	}
  
  	return 0;
  
  EXIT_DEV_REMOVE:
  	dev_err(dev, "Sysfs interface creation failed (%d)
  ", err);
  EXIT_DEV_REMOVE_SILENT:
  	vt1211_remove_sysfs(pdev);

  	return err;
  }

  static int vt1211_remove(struct platform_device *pdev)

  {
  	struct vt1211_data *data = platform_get_drvdata(pdev);

  	hwmon_device_unregister(data->hwmon_dev);

  	vt1211_remove_sysfs(pdev);

  	return 0;
  }
  
  static struct platform_driver vt1211_driver = {
  	.driver = {

  		.name  = DRVNAME,
  	},
  	.probe  = vt1211_probe,

  	.remove = vt1211_remove,

  };
  
  static int __init vt1211_device_add(unsigned short address)
  {
  	struct resource res = {
  		.start	= address,
  		.end	= address + 0x7f,
  		.flags	= IORESOURCE_IO,
  	};
  	int err;
  
  	pdev = platform_device_alloc(DRVNAME, address);
  	if (!pdev) {
  		err = -ENOMEM;

  		pr_err("Device allocation failed (%d)
  ", err);

  		goto EXIT;
  	}
  
  	res.name = pdev->name;

  	err = acpi_check_resource_conflict(&res);
  	if (err)

  		goto EXIT_DEV_PUT;

  	err = platform_device_add_resources(pdev, &res, 1);
  	if (err) {

  		pr_err("Device resource addition failed (%d)
  ", err);

  		goto EXIT_DEV_PUT;
  	}
  
  	err = platform_device_add(pdev);
  	if (err) {

  		pr_err("Device addition failed (%d)
  ", err);

  		goto EXIT_DEV_PUT;
  	}
  
  	return 0;
  
  EXIT_DEV_PUT:
  	platform_device_put(pdev);
  EXIT:
  	return err;
  }

  static int __init vt1211_find(int sio_cip, unsigned short *address)

  {
  	int err = -ENODEV;

  	int devid;

  	superio_enter(sio_cip);

  	devid = force_id ? force_id : superio_inb(sio_cip, SIO_VT1211_DEVID);

  	if (devid != SIO_VT1211_ID)

  		goto EXIT;

  	superio_select(sio_cip, SIO_VT1211_LDN_HWMON);

  	if ((superio_inb(sio_cip, SIO_VT1211_ACTIVE) & 1) == 0) {

  		pr_warn("HW monitor is disabled, skipping
  ");

  		goto EXIT;
  	}

  	*address = ((superio_inb(sio_cip, SIO_VT1211_BADDR) << 8) |
  		    (superio_inb(sio_cip, SIO_VT1211_BADDR + 1))) & 0xff00;

  	if (*address == 0) {

  		pr_warn("Base address is not set, skipping
  ");

  		goto EXIT;
  	}
  
  	err = 0;

  	pr_info("Found VT1211 chip at 0x%04x, revision %u
  ",
  		*address, superio_inb(sio_cip, SIO_VT1211_DEVREV));

  
  EXIT:

  	superio_exit(sio_cip);

  	return err;
  }
  
  static int __init vt1211_init(void)
  {
  	int err;
  	unsigned short address = 0;

  	err = vt1211_find(SIO_REG_CIP1, &address);
  	if (err) {
  		err = vt1211_find(SIO_REG_CIP2, &address);
  		if (err)
  			goto EXIT;

  	}
  
  	if ((uch_config < -1) || (uch_config > 31)) {
  		err = -EINVAL;

  		pr_warn("Invalid UCH configuration %d. Choose a value between 0 and 31.
  ",
  			uch_config);

  		goto EXIT;

  	}
  
  	if ((int_mode < -1) || (int_mode > 0)) {
  		err = -EINVAL;

  		pr_warn("Invalid interrupt mode %d. Only mode 0 is supported.
  ",
  			int_mode);

  		goto EXIT;

  	}
  
  	err = platform_driver_register(&vt1211_driver);

  	if (err)

  		goto EXIT;

  
  	/* Sets global pdev as a side effect */
  	err = vt1211_device_add(address);

  	if (err)

  		goto EXIT_DRV_UNREGISTER;

  
  	return 0;
  
  EXIT_DRV_UNREGISTER:
  	platform_driver_unregister(&vt1211_driver);
  EXIT:
  	return err;
  }
  
  static void __exit vt1211_exit(void)
  {
  	platform_device_unregister(pdev);
  	platform_driver_unregister(&vt1211_driver);
  }
  
  MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>");
  MODULE_DESCRIPTION("VT1211 sensors");
  MODULE_LICENSE("GPL");
  
  module_init(vt1211_init);
  module_exit(vt1211_exit);