Blame view
drivers/regulator/wm8400-regulator.c
7.89 KB
81f7e3824 Initial Release, ... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 |
/* * Regulator support for WM8400 * * Copyright 2008 Wolfson Microelectronics PLC. * * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * */ #include <linux/bug.h> #include <linux/err.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/regulator/driver.h> #include <linux/mfd/wm8400-private.h> static const struct regulator_linear_range wm8400_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000), REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000), }; static const struct regulator_ops wm8400_ldo_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .list_voltage = regulator_list_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .map_voltage = regulator_map_voltage_linear_range, }; static unsigned int wm8400_dcdc_get_mode(struct regulator_dev *dev) { struct wm8400 *wm8400 = rdev_get_drvdata(dev); int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; u16 data[2]; int ret; ret = wm8400_block_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset, 2, data); if (ret != 0) return 0; /* Datasheet: hibernate */ if (data[0] & WM8400_DC1_SLEEP) return REGULATOR_MODE_STANDBY; /* Datasheet: standby */ if (!(data[0] & WM8400_DC1_ACTIVE)) return REGULATOR_MODE_IDLE; /* Datasheet: active with or without force PWM */ if (data[1] & WM8400_DC1_FRC_PWM) return REGULATOR_MODE_FAST; else return REGULATOR_MODE_NORMAL; } static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode) { struct wm8400 *wm8400 = rdev_get_drvdata(dev); int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; int ret; switch (mode) { case REGULATOR_MODE_FAST: /* Datasheet: active with force PWM */ ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset, WM8400_DC1_FRC_PWM, WM8400_DC1_FRC_PWM); if (ret != 0) return ret; return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, WM8400_DC1_ACTIVE); case REGULATOR_MODE_NORMAL: /* Datasheet: active */ ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset, WM8400_DC1_FRC_PWM, 0); if (ret != 0) return ret; return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, WM8400_DC1_ACTIVE); case REGULATOR_MODE_IDLE: /* Datasheet: standby */ return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, 0); default: return -EINVAL; } } static unsigned int wm8400_dcdc_get_optimum_mode(struct regulator_dev *dev, int input_uV, int output_uV, int load_uA) { return REGULATOR_MODE_NORMAL; } static const struct regulator_ops wm8400_dcdc_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_mode = wm8400_dcdc_get_mode, .set_mode = wm8400_dcdc_set_mode, .get_optimum_mode = wm8400_dcdc_get_optimum_mode, }; static struct regulator_desc regulators[] = { { .name = "LDO1", .id = WM8400_LDO1, .ops = &wm8400_ldo_ops, .enable_reg = WM8400_LDO1_CONTROL, .enable_mask = WM8400_LDO1_ENA, .n_voltages = WM8400_LDO1_VSEL_MASK + 1, .linear_ranges = wm8400_ldo_ranges, .n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges), .vsel_reg = WM8400_LDO1_CONTROL, .vsel_mask = WM8400_LDO1_VSEL_MASK, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, { .name = "LDO2", .id = WM8400_LDO2, .ops = &wm8400_ldo_ops, .enable_reg = WM8400_LDO2_CONTROL, .enable_mask = WM8400_LDO2_ENA, .n_voltages = WM8400_LDO2_VSEL_MASK + 1, .linear_ranges = wm8400_ldo_ranges, .n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges), .type = REGULATOR_VOLTAGE, .vsel_reg = WM8400_LDO2_CONTROL, .vsel_mask = WM8400_LDO2_VSEL_MASK, .owner = THIS_MODULE, }, { .name = "LDO3", .id = WM8400_LDO3, .ops = &wm8400_ldo_ops, .enable_reg = WM8400_LDO3_CONTROL, .enable_mask = WM8400_LDO3_ENA, .n_voltages = WM8400_LDO3_VSEL_MASK + 1, .linear_ranges = wm8400_ldo_ranges, .n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges), .vsel_reg = WM8400_LDO3_CONTROL, .vsel_mask = WM8400_LDO3_VSEL_MASK, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, { .name = "LDO4", .id = WM8400_LDO4, .ops = &wm8400_ldo_ops, .enable_reg = WM8400_LDO4_CONTROL, .enable_mask = WM8400_LDO4_ENA, .n_voltages = WM8400_LDO4_VSEL_MASK + 1, .linear_ranges = wm8400_ldo_ranges, .n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges), .vsel_reg = WM8400_LDO4_CONTROL, .vsel_mask = WM8400_LDO4_VSEL_MASK, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, { .name = "DCDC1", .id = WM8400_DCDC1, .ops = &wm8400_dcdc_ops, .enable_reg = WM8400_DCDC1_CONTROL_1, .enable_mask = WM8400_DC1_ENA_MASK, .n_voltages = WM8400_DC1_VSEL_MASK + 1, .vsel_reg = WM8400_DCDC1_CONTROL_1, .vsel_mask = WM8400_DC1_VSEL_MASK, .min_uV = 850000, .uV_step = 25000, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, { .name = "DCDC2", .id = WM8400_DCDC2, .ops = &wm8400_dcdc_ops, .enable_reg = WM8400_DCDC2_CONTROL_1, .enable_mask = WM8400_DC1_ENA_MASK, .n_voltages = WM8400_DC2_VSEL_MASK + 1, .vsel_reg = WM8400_DCDC2_CONTROL_1, .vsel_mask = WM8400_DC2_VSEL_MASK, .min_uV = 850000, .uV_step = 25000, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, }; static int wm8400_regulator_probe(struct platform_device *pdev) { struct wm8400 *wm8400 = container_of(pdev, struct wm8400, regulators[pdev->id]); struct regulator_config config = { }; struct regulator_dev *rdev; config.dev = &pdev->dev; config.init_data = dev_get_platdata(&pdev->dev); config.driver_data = wm8400; config.regmap = wm8400->regmap; rdev = devm_regulator_register(&pdev->dev, ®ulators[pdev->id], &config); if (IS_ERR(rdev)) return PTR_ERR(rdev); platform_set_drvdata(pdev, rdev); return 0; } static struct platform_driver wm8400_regulator_driver = { .driver = { .name = "wm8400-regulator", }, .probe = wm8400_regulator_probe, }; /** * wm8400_register_regulator - enable software control of a WM8400 regulator * * This function enables software control of a WM8400 regulator via * the regulator API. It is intended to be called from the * platform_init() callback of the WM8400 MFD driver. * * @param dev The WM8400 device to operate on. * @param reg The regulator to control. * @param initdata Regulator initdata for the regulator. */ int wm8400_register_regulator(struct device *dev, int reg, struct regulator_init_data *initdata) { struct wm8400 *wm8400 = dev_get_drvdata(dev); if (wm8400->regulators[reg].name) return -EBUSY; initdata->driver_data = wm8400; wm8400->regulators[reg].name = "wm8400-regulator"; wm8400->regulators[reg].id = reg; wm8400->regulators[reg].dev.parent = dev; wm8400->regulators[reg].dev.platform_data = initdata; return platform_device_register(&wm8400->regulators[reg]); } EXPORT_SYMBOL_GPL(wm8400_register_regulator); static int __init wm8400_regulator_init(void) { return platform_driver_register(&wm8400_regulator_driver); } subsys_initcall(wm8400_regulator_init); static void __exit wm8400_regulator_exit(void) { platform_driver_unregister(&wm8400_regulator_driver); } module_exit(wm8400_regulator_exit); MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); MODULE_DESCRIPTION("WM8400 regulator driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:wm8400-regulator"); |