Blame view
drivers/regulator/wm8994-regulator.c
4.97 KB
81f7e3824 Initial Release, ... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 |
/* * wm8994-regulator.c -- Regulator driver for the WM8994 * * Copyright 2009 Wolfson Microelectronics PLC. * * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/bitops.h> #include <linux/err.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> #include <linux/gpio.h> #include <linux/slab.h> #include <linux/mfd/wm8994/core.h> #include <linux/mfd/wm8994/registers.h> #include <linux/mfd/wm8994/pdata.h> struct wm8994_ldo { struct regulator_dev *regulator; struct wm8994 *wm8994; struct regulator_consumer_supply supply; struct regulator_init_data init_data; }; #define WM8994_LDO1_MAX_SELECTOR 0x7 #define WM8994_LDO2_MAX_SELECTOR 0x3 static const struct regulator_ops wm8994_ldo1_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, }; static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev, unsigned int selector) { struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); if (selector > WM8994_LDO2_MAX_SELECTOR) return -EINVAL; switch (ldo->wm8994->type) { case WM8994: return (selector * 100000) + 900000; case WM8958: return (selector * 100000) + 1000000; case WM1811: switch (selector) { case 0: return -EINVAL; default: return (selector * 100000) + 950000; } break; default: return -EINVAL; } } static const struct regulator_ops wm8994_ldo2_ops = { .list_voltage = wm8994_ldo2_list_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, }; static const struct regulator_desc wm8994_ldo_desc[] = { { .name = "LDO1", .id = 1, .type = REGULATOR_VOLTAGE, .n_voltages = WM8994_LDO1_MAX_SELECTOR + 1, .vsel_reg = WM8994_LDO_1, .vsel_mask = WM8994_LDO1_VSEL_MASK, .ops = &wm8994_ldo1_ops, .min_uV = 2400000, .uV_step = 100000, .enable_time = 3000, .owner = THIS_MODULE, }, { .name = "LDO2", .id = 2, .type = REGULATOR_VOLTAGE, .n_voltages = WM8994_LDO2_MAX_SELECTOR + 1, .vsel_reg = WM8994_LDO_2, .vsel_mask = WM8994_LDO2_VSEL_MASK, .ops = &wm8994_ldo2_ops, .enable_time = 3000, .owner = THIS_MODULE, }, }; static const struct regulator_consumer_supply wm8994_ldo_consumer[] = { { .supply = "AVDD1" }, { .supply = "DCVDD" }, }; static const struct regulator_init_data wm8994_ldo_default[] = { { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, }, { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, }, }; static int wm8994_ldo_probe(struct platform_device *pdev) { struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent); struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev); int id = pdev->id % ARRAY_SIZE(pdata->ldo); struct regulator_config config = { }; struct wm8994_ldo *ldo; int ret; dev_dbg(&pdev->dev, "Probing LDO%d ", id + 1); ldo = devm_kzalloc(&pdev->dev, sizeof(struct wm8994_ldo), GFP_KERNEL); if (!ldo) return -ENOMEM; ldo->wm8994 = wm8994; ldo->supply = wm8994_ldo_consumer[id]; ldo->supply.dev_name = dev_name(wm8994->dev); config.dev = wm8994->dev; config.driver_data = ldo; config.regmap = wm8994->regmap; config.init_data = &ldo->init_data; if (pdata) { config.ena_gpio = pdata->ldo[id].enable; } else if (wm8994->dev->of_node) { config.ena_gpio = wm8994->pdata.ldo[id].enable; config.ena_gpio_initialized = true; } /* Use default constraints if none set up */ if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) { dev_dbg(wm8994->dev, "Using default init data, supply %s %s ", ldo->supply.dev_name, ldo->supply.supply); ldo->init_data = wm8994_ldo_default[id]; ldo->init_data.consumer_supplies = &ldo->supply; if (!config.ena_gpio) ldo->init_data.constraints.valid_ops_mask = 0; } else { ldo->init_data = *pdata->ldo[id].init_data; } ldo->regulator = devm_regulator_register(&pdev->dev, &wm8994_ldo_desc[id], &config); if (IS_ERR(ldo->regulator)) { ret = PTR_ERR(ldo->regulator); dev_err(wm8994->dev, "Failed to register LDO%d: %d ", id + 1, ret); goto err; } platform_set_drvdata(pdev, ldo); return 0; err: return ret; } static struct platform_driver wm8994_ldo_driver = { .probe = wm8994_ldo_probe, .driver = { .name = "wm8994-ldo", }, }; module_platform_driver(wm8994_ldo_driver); /* Module information */ MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); MODULE_DESCRIPTION("WM8994 LDO driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:wm8994-ldo"); |