/*
   * Copyright (C) 2015 Phytec Messtechnik GmbH
   * Author: Teresa Remmet <t.remmet@phytec.de>
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License version 2 as
   * published by the Free Software Foundation.
   */
  
  / {
  	model = "Phytec AM335x phyBOARD-WEGA";
  	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";

  	sound: sound_iface {
  		compatible = "ti,da830-evm-audio";
  	};

  	regulators {
  		compatible = "simple-bus";

  		vcc3v3: fixedregulator1 {

  			compatible = "regulator-fixed";
  			regulator-name = "vcc3v3";
  			regulator-min-microvolt = <3300000>;
  			regulator-max-microvolt = <3300000>;
  			regulator-boot-on;
  		};
  	};

  };

  /* Audio */
  &am33xx_pinmux {
  	mcasp0_pins: pinmux_mcasp0 {
  		pinctrl-single,pins = <
  			AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
  			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_aclkx.mcasp0_aclkx */
  			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_fsx.mcasp0_fsx */
  			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_axr0.mcasp0_axr0 */
  			AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
  		>;
  	};
  };
  
  &i2c0 {
  	tlv320aic3007: tlv320aic3007@18 {
  		compatible = "ti,tlv320aic3007";
  		reg = <0x18>;
  		AVDD-supply = <&vcc3v3>;
  		IOVDD-supply = <&vcc3v3>;
  		DRVDD-supply = <&vcc3v3>;
  		DVDD-supply = <&vdig1_reg>;
  		status = "okay";
  	};
  };
  
  &mcasp0 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&mcasp0_pins>;
  	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
  	tdm-slots = <2>;
  	serial-dir = <
  		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
  	>;
  	tx-num-evt = <16>;
  	rt-num-evt = <16>;
  	status = "okay";
  };
  
  &sound {
  	ti,model = "AM335x-Wega";
  	ti,audio-codec = <&tlv320aic3007>;
  	ti,mcasp-controller = <&mcasp0>;
  	ti,audio-routing =
  		"Line Out",		"LLOUT",
  		"Line Out",		"RLOUT",
  		"LINE1L",		"Line In",
  		"LINE1R",		"Line In";
  	clocks = <&mcasp0_fck>;
  	clock-names = "mclk";
  	status = "okay";
  };

  /* CAN Busses */
  &am33xx_pinmux {
  	dcan1_pins: pinmux_dcan1 {
  		pinctrl-single,pins = <

  			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
  			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */

  		>;
  	};
  };
  
  &dcan1 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&dcan1_pins>;
  	status = "okay";
  };
  
  /* Ethernet */
  &am33xx_pinmux {
  	ethernet1_pins: pinmux_ethernet1 {
  		pinctrl-single,pins = <

  			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
  			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
  			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
  			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
  			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
  			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
  			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
  			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
  			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
  			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
  			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
  			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
  			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
  			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */

  		>;
  	};
  };
  
  &cpsw_emac1 {

  	phy-handle = <&phy1>;

  	phy-mode = "mii";
  	dual_emac_res_vlan = <2>;
  };

  &davinci_mdio {
  	phy1: ethernet-phy@1 {
  		reg = <1>;
  	};
  };

  &mac {
  	slaves = <2>;
  	pinctrl-names = "default";
  	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
  	dual_emac = <1>;
  };
  
  /* MMC */
  &am33xx_pinmux {
  	mmc1_pins: pinmux_mmc1 {
  		pinctrl-single,pins = <

  			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
  			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
  			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
  			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
  			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
  			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
  			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */

  		>;
  	};
  };
  
  &mmc1 {

  	vmmc-supply = <&vcc3v3>;

  	bus-width = <4>;
  	pinctrl-names = "default";
  	pinctrl-0 = <&mmc1_pins>;
  	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
  	status = "okay";
  };

  /* Power */
  &vdig1_reg {
  	regulator-boot-on;
  	regulator-always-on;
  };

  /* UARTs */
  &am33xx_pinmux {
  	uart0_pins: pinmux_uart0 {
  		pinctrl-single,pins = <

  			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
  			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */

  		>;
  	};
  
  	uart1_pins: pinmux_uart1_pins {
  		pinctrl-single,pins = <

  			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
  			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
  			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
  			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */

  		>;
  	};
  };
  
  &uart0 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&uart0_pins>;
  	status = "okay";
  };
  
  &uart1 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&uart1_pins>;
  	status = "okay";
  };
  
  /* USB */
  &cppi41dma {
  	status = "okay";
  };
  
  &usb_ctrl_mod {
  	status = "okay";
  };
  
  &usb {
  	status = "okay";
  };
  
  &usb0 {

  	status = "okay";
  };
  
  &usb0_phy {
  	status = "okay";
  };
  
  &usb1 {
  	dr_mode = "host";
  	status = "okay";
  };
  
  &usb1_phy {
  	status = "okay";
  };