Blame view
arch/arm/boot/dts/armada-370-synology-ds213j.dts
8.86 KB
0e76f78cb arm: mvebu: add .... |
1 2 3 4 5 |
/* * Device Tree file for Synology DS213j * * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * |
f14855ee3 ARM: mvebu: armad... |
6 7 8 9 10 11 12 13 14 15 |
* This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * |
24f0b6fe5 ARM: dts: mvebu: ... |
16 |
* This file is distributed in the hope that it will be useful, |
f14855ee3 ARM: mvebu: armad... |
17 18 19 20 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * |
24f0b6fe5 ARM: dts: mvebu: ... |
21 |
* Or, alternatively, |
f14855ee3 ARM: mvebu: armad... |
22 23 24 25 |
* * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without |
24f0b6fe5 ARM: dts: mvebu: ... |
26 |
* restriction, including without limitation the rights to use, |
f14855ee3 ARM: mvebu: armad... |
27 28 29 30 31 32 33 34 |
* copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * |
24f0b6fe5 ARM: dts: mvebu: ... |
35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
f14855ee3 ARM: mvebu: armad... |
36 37 38 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
24f0b6fe5 ARM: dts: mvebu: ... |
39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
f14855ee3 ARM: mvebu: armad... |
40 41 42 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. |
0e76f78cb arm: mvebu: add .... |
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 |
* * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the old 0xd0000000). * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot * bootloaders provided by Marvell. It is used in recent versions of * DSM software provided by Synology. Nonetheless, some earlier boards * were delivered with an older version of u-boot that left internal * registers mapped at 0xd0000000. If you have such a device you will * not be able to directly boot a kernel based on this Device Tree. In * that case, the preferred solution is to update your bootloader (e.g. * by upgrading to latest version of DSM, or building a new one and * installing it from u-boot prompt) or adjust the Devive Tree * (s/0xf1000000/0xd0000000/ in 'ranges' below). */ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include "armada-370.dtsi" / { model = "Synology DS213j"; compatible = "synology,ds213j", "marvell,armada370", "marvell,armada-370-xp"; chosen { |
9552203cb ARM: mvebu: use s... |
70 |
stdout-path = "serial0:115200n8"; |
0e76f78cb arm: mvebu: add .... |
71 |
}; |
6f477f43f ARM: dts: armada-... |
72 |
memory@0 { |
0e76f78cb arm: mvebu: add .... |
73 74 75 76 77 78 |
device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
b416f1926 ARM: mvebu: defin... |
79 80 |
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; |
0e76f78cb arm: mvebu: add .... |
81 82 83 84 85 86 87 |
internal-regs { /* RTC provided by Seiko S-35390A I2C RTC chip below */ rtc@10300 { status = "disabled"; }; |
0e76f78cb arm: mvebu: add .... |
88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 |
i2c@11000 { compatible = "marvell,mv64xxx-i2c"; pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; clock-frequency = <400000>; status = "okay"; /* Main device RTC chip */ s35390a: s35390a@30 { compatible = "sii,s35390a"; reg = <0x30>; }; }; /* Connected to a header on device's PCB */ serial@12000 { status = "okay"; }; /* Connected to a TI MSP430F2111 for power control */ serial@12100 { status = "okay"; }; poweroff@12100 { compatible = "synology,power-off"; reg = <0x12100 0x100>; clocks = <&coreclk 0>; }; /* rear USB port, near reset button */ usb@50000 { status = "okay"; }; /* rear USB port, near RJ45 port */ usb@51000 { status = "okay"; }; |
0e76f78cb arm: mvebu: add .... |
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 |
ethernet@70000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; }; sata@a0000 { nr-ports = <2>; status = "okay"; }; }; }; gpio-fan-32-38 { status = "okay"; compatible = "gpio-fan"; pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin &fan_ctrl_high_pin &fan_alarm_pin>; pinctrl-names = "default"; gpios = <&gpio1 31 GPIO_ACTIVE_HIGH &gpio2 0 GPIO_ACTIVE_HIGH &gpio2 1 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = < 0 0 1000 1 1150 2 1350 4 1500 3 1650 5 1750 6 1900 7 >; }; gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&disk1_led_pin &disk2_led_pin>; pinctrl-names = "default"; disk1-led-amber { label = "synology:amber:disk1"; gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; default-state = "keep"; }; disk2-led-amber { label = "synology:amber:disk2"; gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; default-state = "keep"; }; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>; pinctrl-names = "default"; |
baa2f7447 ARM: dts: armada-... |
185 |
sata1_regulator: sata1-regulator@1 { |
0e76f78cb arm: mvebu: add .... |
186 187 188 189 190 191 192 193 194 195 196 |
compatible = "regulator-fixed"; reg = <1>; regulator-name = "SATA1 Power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; startup-delay-us = <2000000>; enable-active-high; regulator-always-on; regulator-boot-on; gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; |
baa2f7447 ARM: dts: armada-... |
197 |
sata2_regulator: sata2-regulator@2 { |
0e76f78cb arm: mvebu: add .... |
198 199 200 201 202 203 204 205 206 207 208 209 210 |
compatible = "regulator-fixed"; reg = <2>; regulator-name = "SATA2 Power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; startup-delay-us = <4000000>; enable-active-high; regulator-always-on; regulator-boot-on; gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>; }; }; }; |
1fc212955 ARM: dts: armada-... |
211 212 213 214 215 |
&mdio { phy1: ethernet-phy@1 { /* Marvell 88E1512 */ reg = <1>; }; }; |
0e76f78cb arm: mvebu: add .... |
216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 |
&pinctrl { disk1_led_pin: disk1-led-pin { marvell,pins = "mpp31"; marvell,function = "gpio"; }; disk2_led_pin: disk2-led-pin { marvell,pins = "mpp32"; marvell,function = "gpio"; }; sata1_pwr_pin: sata1-pwr-pin { marvell,pins = "mpp37"; marvell,function = "gpio"; }; sata2_pwr_pin: sata2-pwr-pin { marvell,pins = "mpp62"; marvell,function = "gpio"; }; sata1_pres_pin: sata1-pres-pin { marvell,pins = "mpp60"; marvell,function = "gpio"; }; sata2_pres_pin: sata2-pres-pin { marvell,pins = "mpp48"; marvell,function = "gpio"; }; syno_id_bit0_pin: syno-id-bit0-pin { marvell,pins = "mpp55"; marvell,function = "gpio"; }; syno_id_bit1_pin: syno-id-bit1-pin { marvell,pins = "mpp56"; marvell,function = "gpio"; }; syno_id_bit2_pin: syno-id-bit2-pin { marvell,pins = "mpp57"; marvell,function = "gpio"; }; syno_id_bit3_pin: syno-id-bit3-pin { marvell,pins = "mpp58"; marvell,function = "gpio"; }; fan_ctrl_low_pin: fan-ctrl-low-pin { marvell,pins = "mpp65"; marvell,function = "gpio"; }; fan_ctrl_mid_pin: fan-ctrl-mid-pin { marvell,pins = "mpp64"; marvell,function = "gpio"; }; fan_ctrl_high_pin: fan-ctrl-high-pin { marvell,pins = "mpp63"; |
ce5cad51f ARM: dts: armada-... |
279 |
marvell,function = "gpio"; |
0e76f78cb arm: mvebu: add .... |
280 281 282 283 284 285 286 |
}; fan_alarm_pin: fan-alarm-pin { marvell,pins = "mpp38"; marvell,function = "gpio"; }; }; |
0160a4b68 ARM: dts: mvebu: ... |
287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 |
&spi0 { status = "okay"; spi-flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <20000000>; /* * Warning! * * Synology u-boot uses its compiled-in environment * and it seems Synology did not care to change u-boot * default configuration in order to allow saving a * modified environment at a sensible location. So, * if you do a 'saveenv' under u-boot, your modified * environment will be saved at 1MB after the start * of the flash, i.e. in the middle of the uImage. * For that reason, it is strongly advised not to * change the default environment, unless you know * what you are doing. */ partition@00000000 { /* u-boot */ label = "RedBoot"; reg = <0x00000000 0x000c0000>; /* 768KB */ }; partition@000c0000 { /* uImage */ label = "zImage"; reg = <0x000c0000 0x002d0000>; /* 2880KB */ }; partition@00390000 { /* uInitramfs */ label = "rd.gz"; reg = <0x00390000 0x00440000>; /* 4250KB */ }; partition@007d0000 { /* MAC address and serial number */ label = "vendor"; reg = <0x007d0000 0x00010000>; /* 64KB */ }; partition@007e0000 { label = "RedBoot config"; reg = <0x007e0000 0x00010000>; /* 64KB */ }; partition@007f0000 { label = "FIS directory"; reg = <0x007f0000 0x00010000>; /* 64KB */ }; }; }; |