/*
   * Copyright 2013-2014 Freescale Semiconductor, Inc.
   *
   * This file is dual-licensed: you can use it either under the terms
   * of the GPL or the X11 license, at your option. Note that this dual
   * licensing only applies to this file, and not this project as a
   * whole.
   *
   *  a) This file is free software; you can redistribute it and/or
   *     modify it under the terms of the GNU General Public License as
   *     published by the Free Software Foundation; either version 2 of
   *     the License, or (at your option) any later version.
   *
   *     This file is distributed in the hope that it will be useful,
   *     but WITHOUT ANY WARRANTY; without even the implied warranty of
   *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   *     GNU General Public License for more details.
   *
   *     You should have received a copy of the GNU General Public
   *     License along with this file; if not, write to the Free
   *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
   *     MA 02110-1301 USA
   *
   * Or, alternatively,
   *
   *  b) Permission is hereby granted, free of charge, to any person
   *     obtaining a copy of this software and associated documentation
   *     files (the "Software"), to deal in the Software without
   *     restriction, including without limitation the rights to use,
   *     copy, modify, merge, publish, distribute, sublicense, and/or
   *     sell copies of the Software, and to permit persons to whom the
   *     Software is furnished to do so, subject to the following
   *     conditions:
   *
   *     The above copyright notice and this permission notice shall be
   *     included in all copies or substantial portions of the Software.
   *
   *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
   *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
   *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
   *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
   *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
   *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
   *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
   *     OTHER DEALINGS IN THE SOFTWARE.
   */
  
  /dts-v1/;
  #include "ls1021a.dtsi"
  
  / {
  	model = "LS1021A TWR Board";
  
  	aliases {
  		enet2_rgmii_phy = &rgmii_phy1;
  		enet0_sgmii_phy = &sgmii_phy2;
  		enet1_sgmii_phy = &sgmii_phy0;
  	};

  
  	sys_mclk: clock-mclk {
  		compatible = "fixed-clock";
  		#clock-cells = <0>;
  		clock-frequency = <24576000>;
  	};
  
  	regulators {
  		compatible = "simple-bus";
  		#address-cells = <1>;
  		#size-cells = <0>;
  
  		reg_3p3v: regulator@0 {
  			compatible = "regulator-fixed";
  			reg = <0>;
  			regulator-name = "3P3V";
  			regulator-min-microvolt = <3300000>;
  			regulator-max-microvolt = <3300000>;
  			regulator-always-on;
  		};
  	};
  
  	sound {
  		compatible = "simple-audio-card";
  		simple-audio-card,format = "i2s";
  		simple-audio-card,widgets =
  			"Microphone", "Microphone Jack",
  			"Headphone", "Headphone Jack",
  			"Speaker", "Speaker Ext",
  			"Line", "Line In Jack";
  		simple-audio-card,routing =
  			"MIC_IN", "Microphone Jack",
  			"Microphone Jack", "Mic Bias",
  			"LINE_IN", "Line In Jack",
  			"Headphone Jack", "HP_OUT",
  			"Speaker Ext", "LINE_OUT";
  
  		simple-audio-card,cpu {
  			sound-dai = <&sai1>;
  			frame-master;
  			bitclock-master;
  		};
  
  		simple-audio-card,codec {
  			sound-dai = <&codec>;
  			frame-master;
  			bitclock-master;
  		};
  	};

  
  	panel: panel {
  		compatible = "nec,nl4827hc19-05b";

  
  		port {
  			panel_in: endpoint {
  				remote-endpoint = <&dcu_out>;
  			};
  		};

  	};
  };
  
  &dcu {

  	status = "okay";

  
  	port {
  		dcu_out: endpoint {
  			remote-endpoint = <&panel_in>;
  		};
  	};

  };
  
  &dspi1 {
  	bus-num = <0>;
  	status = "okay";
  
  	dspiflash: s25fl064k@0 {
  		#address-cells = <1>;
  		#size-cells = <1>;
  		compatible = "spansion,s25fl064k";
  		spi-max-frequency = <16000000>;
  		spi-cpol;
  		spi-cpha;
  		reg = <0>;
  	};
  };

  &enet0 {
  	tbi-handle = <&tbi1>;
  	phy-handle = <&sgmii_phy2>;
  	phy-connection-type = "sgmii";
  	status = "okay";
  };
  
  &enet1 {
  	tbi-handle = <&tbi1>;
  	phy-handle = <&sgmii_phy0>;
  	phy-connection-type = "sgmii";
  	status = "okay";
  };
  
  &enet2 {
  	phy-handle = <&rgmii_phy1>;
  	phy-connection-type = "rgmii-id";
  	status = "okay";
  };

  &i2c0 {
  	status = "okay";

  
  	ina220@40 {
  		compatible = "ti,ina220";
  		reg = <0x40>;
  		shunt-resistor = <1000>;
  	};
  
  	ina220@41 {
  		compatible = "ti,ina220";
  		reg = <0x41>;
  		shunt-resistor = <1000>;
  	};

  };
  
  &i2c1 {
  	status = "okay";

  	codec: sgtl5000@a {
  		#sound-dai-cells = <0>;
  		compatible = "fsl,sgtl5000";
  		reg = <0x0a>;
  		VDDA-supply = <&reg_3p3v>;
  		VDDIO-supply = <&reg_3p3v>;

  		clocks = <&sys_mclk>;

  	};

  };
  
  &ifc {
  	#address-cells = <2>;
  	#size-cells = <1>;
  	/* NOR Flash on board */
  	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
  	status = "okay";
  
  	nor@0,0 {
  		#address-cells = <1>;
  		#size-cells = <1>;
  		compatible = "cfi-flash";
  		reg = <0x0 0x0 0x8000000>;
  		bank-width = <2>;
  		device-width = <1>;
  	};
  };
  
  &lpuart0 {
  	status = "okay";
  };
  
  &mdio0 {
  	sgmii_phy0: ethernet-phy@0 {
  		reg = <0x0>;
  	};
  	rgmii_phy1: ethernet-phy@1 {
  		reg = <0x1>;
  	};
  	sgmii_phy2: ethernet-phy@2 {
  		reg = <0x2>;
  	};
  	tbi1: tbi-phy@1f {
  		reg = <0x1f>;
  		device_type = "tbi-phy";
  	};
  };

  &sai1 {
  	status = "okay";
  };

  &sata {
  	status = "okay";
  };

  &uart0 {
  	status = "okay";
  };
  
  &uart1 {
  	status = "okay";
  };