Blame view
drivers/scsi/constants.c
50.9 KB
1da177e4c Linux-2.6.12-rc2 |
1 2 3 4 5 6 |
/* * ASCII values for a number of symbolic constants, printing functions, * etc. * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422) * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002) * by D. Gilbert and aeb (20020609) |
b4567ca63 [SCSI] update scs... |
7 |
* Update to SPC-4 T10/1713-D Rev 20, 22 May 2009, D. Gilbert 20090624 |
1da177e4c Linux-2.6.12-rc2 |
8 |
*/ |
1da177e4c Linux-2.6.12-rc2 |
9 10 11 12 13 |
#include <linux/blkdev.h> #include <linux/module.h> #include <linux/kernel.h> #include <scsi/scsi.h> |
beb404875 [SCSI] remove scs... |
14 |
#include <scsi/scsi_cmnd.h> |
1da177e4c Linux-2.6.12-rc2 |
15 16 |
#include <scsi/scsi_device.h> #include <scsi/scsi_host.h> |
1da177e4c Linux-2.6.12-rc2 |
17 |
#include <scsi/scsi_eh.h> |
de540a53f [SCSI] drivers/sc... |
18 |
#include <scsi/scsi_dbg.h> |
1da177e4c Linux-2.6.12-rc2 |
19 20 21 22 23 24 25 26 27 28 |
/* Commands with service actions that change the command name */ #define MAINTENANCE_IN 0xa3 #define MAINTENANCE_OUT 0xa4 #define SERVICE_ACTION_IN_12 0xab #define SERVICE_ACTION_OUT_12 0xa9 #define SERVICE_ACTION_IN_16 0x9e #define SERVICE_ACTION_OUT_16 0x9f |
1da177e4c Linux-2.6.12-rc2 |
29 30 31 32 33 34 35 |
#ifdef CONFIG_SCSI_CONSTANTS static const char * cdb_byte0_names[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, |
70f23fd66 treewide: fix a f... |
36 |
"Reassign Blocks", |
a507c6a2d [SCSI] update add... |
37 |
/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL, |
1da177e4c Linux-2.6.12-rc2 |
38 |
/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", |
a507c6a2d [SCSI] update add... |
39 40 41 |
/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)", "Reserve(6)", /* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)", |
1da177e4c Linux-2.6.12-rc2 |
42 43 44 45 |
/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", /* 1e-1f */ "Prevent/Allow Medium Removal", NULL, /* 20-22 */ NULL, NULL, NULL, /* 23-28 */ "Read Format Capacities", "Set Window", |
a507c6a2d [SCSI] update add... |
46 47 48 49 |
"Read Capacity(10)", NULL, NULL, "Read(10)", /* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)", "Read updated block", /* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal", |
1da177e4c Linux-2.6.12-rc2 |
50 |
/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", |
a507c6a2d [SCSI] update add... |
51 |
/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)", |
1da177e4c Linux-2.6.12-rc2 |
52 53 54 |
"Read Defect Data(10)", /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", "Read Buffer", |
a507c6a2d [SCSI] update add... |
55 56 |
/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)", /* 40-41 */ "Change Definition", "Write Same(10)", |
b4567ca63 [SCSI] update scs... |
57 58 59 |
/* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP", "Read density support", "Play audio(10)", "Get configuration", "Play audio msf", "Play audio track/index", |
a507c6a2d [SCSI] update add... |
60 |
/* 49-4f */ "Play track relative(10)", "Get event status notification", |
1da177e4c Linux-2.6.12-rc2 |
61 62 63 |
"Pause/resume", "Log Select", "Log Sense", "Stop play/scan", NULL, /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info", |
a507c6a2d [SCSI] update add... |
64 65 66 |
"Reserve track", "Send OPC info", "Mode Select(10)", /* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue", "Mode Sense(10)", "Close track/session", |
1da177e4c Linux-2.6.12-rc2 |
67 68 69 70 71 |
/* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in", "Persistent reserve out", /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, |
b4567ca63 [SCSI] update scs... |
72 73 |
/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB", "Variable length", |
a507c6a2d [SCSI] update add... |
74 |
/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy", |
1da177e4c Linux-2.6.12-rc2 |
75 |
"Receive copy results", |
a507c6a2d [SCSI] update add... |
76 77 |
/* 85-89 */ "ATA command pass through(16)", "Access control in", "Access control out", "Read(16)", "Memory Export Out(16)", |
b4567ca63 [SCSI] update scs... |
78 |
/* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes", |
a507c6a2d [SCSI] update add... |
79 80 81 |
"Write and verify(16)", "Verify(16)", /* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)", "Lock/unlock cache(16)", "Write same(16)", NULL, |
1da177e4c Linux-2.6.12-rc2 |
82 |
/* 95-99 */ NULL, NULL, NULL, NULL, NULL, |
a507c6a2d [SCSI] update add... |
83 84 85 86 87 |
/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)", "Service action out(16)", /* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank", "Security protocol in", "Maintenance in", "Maintenance out", "Move medium/play audio(12)", |
1da177e4c Linux-2.6.12-rc2 |
88 89 90 91 92 93 94 |
/* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)", "Play track relative(12)", /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance", "Read DVD structure", "Write and verify(12)", /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", /* b2-b4 */ "Search data low(12)", "Set limits(12)", "Read element status attached", |
a507c6a2d [SCSI] update add... |
95 |
/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming", |
1da177e4c Linux-2.6.12-rc2 |
96 97 |
/* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf", /* ba-bc */ "Redundancy group (in), Scan", |
a507c6a2d [SCSI] update add... |
98 99 100 |
"Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd", /* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd", "Volume set (out), Send DVD structure", |
1da177e4c Linux-2.6.12-rc2 |
101 102 103 104 105 106 107 108 |
}; struct value_name_pair { int value; const char * name; }; static const struct value_name_pair maint_in_arr[] = { |
b4567ca63 [SCSI] update scs... |
109 |
{0x5, "Report identifying information"}, |
1da177e4c Linux-2.6.12-rc2 |
110 111 112 113 114 |
{0xa, "Report target port groups"}, {0xb, "Report aliases"}, {0xc, "Report supported operation codes"}, {0xd, "Report supported task management functions"}, {0xe, "Report priority"}, |
a507c6a2d [SCSI] update add... |
115 |
{0xf, "Report timestamp"}, |
b4567ca63 [SCSI] update scs... |
116 |
{0x10, "Management protocol in"}, |
1da177e4c Linux-2.6.12-rc2 |
117 |
}; |
6391a1137 [SCSI] drivers/sc... |
118 |
#define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr) |
1da177e4c Linux-2.6.12-rc2 |
119 120 |
static const struct value_name_pair maint_out_arr[] = { |
b4567ca63 [SCSI] update scs... |
121 |
{0x6, "Set identifying information"}, |
1da177e4c Linux-2.6.12-rc2 |
122 123 124 |
{0xa, "Set target port groups"}, {0xb, "Change aliases"}, {0xe, "Set priority"}, |
b4567ca63 [SCSI] update scs... |
125 126 |
{0xf, "Set timestamp"}, {0x10, "Management protocol out"}, |
1da177e4c Linux-2.6.12-rc2 |
127 |
}; |
6391a1137 [SCSI] drivers/sc... |
128 |
#define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr) |
1da177e4c Linux-2.6.12-rc2 |
129 130 131 132 |
static const struct value_name_pair serv_in12_arr[] = { {0x1, "Read media serial number"}, }; |
6391a1137 [SCSI] drivers/sc... |
133 |
#define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr) |
1da177e4c Linux-2.6.12-rc2 |
134 135 136 137 |
static const struct value_name_pair serv_out12_arr[] = { {-1, "dummy entry"}, }; |
6391a1137 [SCSI] drivers/sc... |
138 |
#define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr) |
1da177e4c Linux-2.6.12-rc2 |
139 140 141 142 |
static const struct value_name_pair serv_in16_arr[] = { {0x10, "Read capacity(16)"}, {0x11, "Read long(16)"}, |
f57e4502c [SCSI] scsi: Add ... |
143 |
{0x12, "Get LBA status"}, |
1da177e4c Linux-2.6.12-rc2 |
144 |
}; |
6391a1137 [SCSI] drivers/sc... |
145 |
#define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr) |
1da177e4c Linux-2.6.12-rc2 |
146 147 148 149 150 |
static const struct value_name_pair serv_out16_arr[] = { {0x11, "Write long(16)"}, {0x1f, "Notify data transfer device(16)"}, }; |
6391a1137 [SCSI] drivers/sc... |
151 |
#define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr) |
1da177e4c Linux-2.6.12-rc2 |
152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 |
static const struct value_name_pair variable_length_arr[] = { {0x1, "Rebuild(32)"}, {0x2, "Regenerate(32)"}, {0x3, "Xdread(32)"}, {0x4, "Xdwrite(32)"}, {0x5, "Xdwrite extended(32)"}, {0x6, "Xpwrite(32)"}, {0x7, "Xdwriteread(32)"}, {0x8, "Xdwrite extended(64)"}, {0x9, "Read(32)"}, {0xa, "Verify(32)"}, {0xb, "Write(32)"}, {0xc, "Write an verify(32)"}, {0xd, "Write same(32)"}, {0x8801, "Format OSD"}, {0x8802, "Create (osd)"}, {0x8803, "List (osd)"}, {0x8805, "Read (osd)"}, {0x8806, "Write (osd)"}, {0x8807, "Append (osd)"}, {0x8808, "Flush (osd)"}, {0x880a, "Remove (osd)"}, {0x880b, "Create partition (osd)"}, {0x880c, "Remove partition (osd)"}, {0x880e, "Get attributes (osd)"}, {0x880f, "Set attributes (osd)"}, {0x8812, "Create and write (osd)"}, {0x8815, "Create collection (osd)"}, {0x8816, "Remove collection (osd)"}, {0x8817, "List collection (osd)"}, {0x8818, "Set key (osd)"}, {0x8819, "Set master key (osd)"}, {0x881a, "Flush collection (osd)"}, {0x881b, "Flush partition (osd)"}, {0x881c, "Flush OSD"}, {0x8f7e, "Perform SCSI command (osd)"}, {0x8f7f, "Perform task management function (osd)"}, }; |
6391a1137 [SCSI] drivers/sc... |
191 |
#define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr) |
1da177e4c Linux-2.6.12-rc2 |
192 193 194 195 196 197 198 199 200 201 202 203 204 205 |
static const char * get_sa_name(const struct value_name_pair * arr, int arr_sz, int service_action) { int k; for (k = 0; k < arr_sz; ++k, ++arr) { if (service_action == arr->value) break; } return (k < arr_sz) ? arr->name : NULL; } /* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */ |
684b7fe97 [SCSI] constants.... |
206 |
static void print_opcode_name(unsigned char * cdbp, int cdb_len) |
1da177e4c Linux-2.6.12-rc2 |
207 208 209 |
{ int sa, len, cdb0; const char * name; |
1da177e4c Linux-2.6.12-rc2 |
210 211 212 213 |
cdb0 = cdbp[0]; switch(cdb0) { case VARIABLE_LENGTH_CMD: |
db4742dd8 [SCSI] add suppor... |
214 |
len = scsi_varlen_cdb_length(cdbp); |
1da177e4c Linux-2.6.12-rc2 |
215 |
if (len < 10) { |
684b7fe97 [SCSI] constants.... |
216 217 |
printk("short variable length command, " "len=%d ext_len=%d", len, cdb_len); |
1da177e4c Linux-2.6.12-rc2 |
218 219 220 |
break; } sa = (cdbp[8] << 8) + cdbp[9]; |
8475f688d [SCSI] Fix printi... |
221 222 |
name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ, sa); if (name) |
684b7fe97 [SCSI] constants.... |
223 |
printk("%s", name); |
8475f688d [SCSI] Fix printi... |
224 |
else |
684b7fe97 [SCSI] constants.... |
225 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
8475f688d [SCSI] Fix printi... |
226 227 228 |
if ((cdb_len > 0) && (len != cdb_len)) printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len); |
1da177e4c Linux-2.6.12-rc2 |
229 230 231 232 233 |
break; case MAINTENANCE_IN: sa = cdbp[1] & 0x1f; name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa); if (name) |
684b7fe97 [SCSI] constants.... |
234 |
printk("%s", name); |
1da177e4c Linux-2.6.12-rc2 |
235 |
else |
684b7fe97 [SCSI] constants.... |
236 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4c Linux-2.6.12-rc2 |
237 238 239 240 241 |
break; case MAINTENANCE_OUT: sa = cdbp[1] & 0x1f; name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa); if (name) |
684b7fe97 [SCSI] constants.... |
242 |
printk("%s", name); |
1da177e4c Linux-2.6.12-rc2 |
243 |
else |
684b7fe97 [SCSI] constants.... |
244 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4c Linux-2.6.12-rc2 |
245 246 247 248 249 |
break; case SERVICE_ACTION_IN_12: sa = cdbp[1] & 0x1f; name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa); if (name) |
684b7fe97 [SCSI] constants.... |
250 |
printk("%s", name); |
1da177e4c Linux-2.6.12-rc2 |
251 |
else |
684b7fe97 [SCSI] constants.... |
252 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4c Linux-2.6.12-rc2 |
253 254 255 256 257 |
break; case SERVICE_ACTION_OUT_12: sa = cdbp[1] & 0x1f; name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa); if (name) |
684b7fe97 [SCSI] constants.... |
258 |
printk("%s", name); |
1da177e4c Linux-2.6.12-rc2 |
259 |
else |
684b7fe97 [SCSI] constants.... |
260 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4c Linux-2.6.12-rc2 |
261 262 263 264 265 |
break; case SERVICE_ACTION_IN_16: sa = cdbp[1] & 0x1f; name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa); if (name) |
684b7fe97 [SCSI] constants.... |
266 |
printk("%s", name); |
1da177e4c Linux-2.6.12-rc2 |
267 |
else |
684b7fe97 [SCSI] constants.... |
268 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4c Linux-2.6.12-rc2 |
269 270 271 272 273 |
break; case SERVICE_ACTION_OUT_16: sa = cdbp[1] & 0x1f; name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa); if (name) |
684b7fe97 [SCSI] constants.... |
274 |
printk("%s", name); |
1da177e4c Linux-2.6.12-rc2 |
275 |
else |
684b7fe97 [SCSI] constants.... |
276 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4c Linux-2.6.12-rc2 |
277 278 279 280 281 |
break; default: if (cdb0 < 0xc0) { name = cdb_byte0_names[cdb0]; if (name) |
684b7fe97 [SCSI] constants.... |
282 |
printk("%s", name); |
1da177e4c Linux-2.6.12-rc2 |
283 |
else |
684b7fe97 [SCSI] constants.... |
284 |
printk("cdb[0]=0x%x (reserved)", cdb0); |
1da177e4c Linux-2.6.12-rc2 |
285 |
} else |
684b7fe97 [SCSI] constants.... |
286 |
printk("cdb[0]=0x%x (vendor)", cdb0); |
1da177e4c Linux-2.6.12-rc2 |
287 288 289 290 291 |
break; } } #else /* ifndef CONFIG_SCSI_CONSTANTS */ |
684b7fe97 [SCSI] constants.... |
292 |
static void print_opcode_name(unsigned char * cdbp, int cdb_len) |
1da177e4c Linux-2.6.12-rc2 |
293 294 |
{ int sa, len, cdb0; |
1da177e4c Linux-2.6.12-rc2 |
295 296 297 298 |
cdb0 = cdbp[0]; switch(cdb0) { case VARIABLE_LENGTH_CMD: |
db4742dd8 [SCSI] add suppor... |
299 |
len = scsi_varlen_cdb_length(cdbp); |
1da177e4c Linux-2.6.12-rc2 |
300 |
if (len < 10) { |
684b7fe97 [SCSI] constants.... |
301 302 |
printk("short opcode=0x%x command, len=%d " "ext_len=%d", cdb0, len, cdb_len); |
1da177e4c Linux-2.6.12-rc2 |
303 304 305 |
break; } sa = (cdbp[8] << 8) + cdbp[9]; |
684b7fe97 [SCSI] constants.... |
306 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4c Linux-2.6.12-rc2 |
307 308 309 310 311 312 313 314 315 316 |
if (len != cdb_len) printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len); break; case MAINTENANCE_IN: case MAINTENANCE_OUT: case SERVICE_ACTION_IN_12: case SERVICE_ACTION_OUT_12: case SERVICE_ACTION_IN_16: case SERVICE_ACTION_OUT_16: sa = cdbp[1] & 0x1f; |
684b7fe97 [SCSI] constants.... |
317 |
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4c Linux-2.6.12-rc2 |
318 319 320 |
break; default: if (cdb0 < 0xc0) |
684b7fe97 [SCSI] constants.... |
321 |
printk("cdb[0]=0x%x", cdb0); |
1da177e4c Linux-2.6.12-rc2 |
322 |
else |
684b7fe97 [SCSI] constants.... |
323 |
printk("cdb[0]=0x%x (vendor)", cdb0); |
1da177e4c Linux-2.6.12-rc2 |
324 325 326 327 |
break; } } #endif |
684b7fe97 [SCSI] constants.... |
328 |
void __scsi_print_command(unsigned char *cdb) |
1da177e4c Linux-2.6.12-rc2 |
329 330 |
{ int k, len; |
684b7fe97 [SCSI] constants.... |
331 |
print_opcode_name(cdb, 0); |
db4742dd8 [SCSI] add suppor... |
332 |
len = scsi_command_size(cdb); |
1da177e4c Linux-2.6.12-rc2 |
333 334 |
/* print out all bytes in cdb */ for (k = 0; k < len; ++k) |
684b7fe97 [SCSI] constants.... |
335 |
printk(" %02x", cdb[k]); |
1da177e4c Linux-2.6.12-rc2 |
336 337 338 339 |
printk(" "); } EXPORT_SYMBOL(__scsi_print_command); |
684b7fe97 [SCSI] constants.... |
340 |
void scsi_print_command(struct scsi_cmnd *cmd) |
1da177e4c Linux-2.6.12-rc2 |
341 342 |
{ int k; |
77c9cfc51 [SCSI] Fix printi... |
343 344 |
if (cmd->cmnd == NULL) return; |
684b7fe97 [SCSI] constants.... |
345 346 |
scmd_printk(KERN_INFO, cmd, "CDB: "); print_opcode_name(cmd->cmnd, cmd->cmd_len); |
1da177e4c Linux-2.6.12-rc2 |
347 348 |
/* print out all bytes in cdb */ printk(":"); |
684b7fe97 [SCSI] constants.... |
349 350 |
for (k = 0; k < cmd->cmd_len; ++k) printk(" %02x", cmd->cmnd[k]); |
1da177e4c Linux-2.6.12-rc2 |
351 352 353 |
printk(" "); } |
684b7fe97 [SCSI] constants.... |
354 |
EXPORT_SYMBOL(scsi_print_command); |
1da177e4c Linux-2.6.12-rc2 |
355 356 |
/** |
db9dff366 [PATCH] remove ou... |
357 |
* scsi_print_status - print scsi status description |
1da177e4c Linux-2.6.12-rc2 |
358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 |
* @scsi_status: scsi status value * * If the status is recognized, the description is printed. * Otherwise "Unknown status" is output. No trailing space. * If CONFIG_SCSI_CONSTANTS is not set, then print status in hex * (e.g. "0x2" for Check Condition). **/ void scsi_print_status(unsigned char scsi_status) { #ifdef CONFIG_SCSI_CONSTANTS const char * ccp; switch (scsi_status) { case 0: ccp = "Good"; break; case 0x2: ccp = "Check Condition"; break; case 0x4: ccp = "Condition Met"; break; case 0x8: ccp = "Busy"; break; case 0x10: ccp = "Intermediate"; break; case 0x14: ccp = "Intermediate-Condition Met"; break; case 0x18: ccp = "Reservation Conflict"; break; case 0x22: ccp = "Command Terminated"; break; /* obsolete */ case 0x28: ccp = "Task set Full"; break; /* was: Queue Full */ case 0x30: ccp = "ACA Active"; break; case 0x40: ccp = "Task Aborted"; break; default: ccp = "Unknown status"; } printk(KERN_INFO "%s", ccp); #else printk(KERN_INFO "0x%0x", scsi_status); #endif } EXPORT_SYMBOL(scsi_print_status); #ifdef CONFIG_SCSI_CONSTANTS struct error_info { unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ const char * text; }; |
62d42a627 [SCSI] constants.... |
397 398 399 400 401 |
/* * The canonical list of T10 Additional Sense Codes is available at: * http://www.t10.org/lists/asc-num.txt */ static const struct error_info additional[] = |
1da177e4c Linux-2.6.12-rc2 |
402 403 404 405 406 407 408 409 |
{ {0x0000, "No additional sense information"}, {0x0001, "Filemark detected"}, {0x0002, "End-of-partition/medium detected"}, {0x0003, "Setmark detected"}, {0x0004, "Beginning-of-partition/medium detected"}, {0x0005, "End-of-data detected"}, {0x0006, "I/O process terminated"}, |
b4567ca63 [SCSI] update scs... |
410 |
{0x0007, "Programmable early warning detected"}, |
1da177e4c Linux-2.6.12-rc2 |
411 412 413 414 415 416 417 418 419 420 421 422 |
{0x0011, "Audio play operation in progress"}, {0x0012, "Audio play operation paused"}, {0x0013, "Audio play operation successfully completed"}, {0x0014, "Audio play operation stopped due to error"}, {0x0015, "No current audio status to return"}, {0x0016, "Operation in progress"}, {0x0017, "Cleaning requested"}, {0x0018, "Erase operation in progress"}, {0x0019, "Locate operation in progress"}, {0x001A, "Rewind operation in progress"}, {0x001B, "Set capacity operation in progress"}, {0x001C, "Verify operation in progress"}, |
a507c6a2d [SCSI] update add... |
423 |
{0x001D, "ATA pass through information available"}, |
b4567ca63 [SCSI] update scs... |
424 |
{0x001E, "Conflicting SA creation request"}, |
1da177e4c Linux-2.6.12-rc2 |
425 426 427 428 429 430 431 432 433 434 435 |
{0x0100, "No index/sector signal"}, {0x0200, "No seek complete"}, {0x0300, "Peripheral device write fault"}, {0x0301, "No write current"}, {0x0302, "Excessive write errors"}, {0x0400, "Logical unit not ready, cause not reportable"}, {0x0401, "Logical unit is in process of becoming ready"}, |
a507c6a2d [SCSI] update add... |
436 |
{0x0402, "Logical unit not ready, initializing command required"}, |
1da177e4c Linux-2.6.12-rc2 |
437 438 439 440 441 442 443 444 445 446 447 448 |
{0x0403, "Logical unit not ready, manual intervention required"}, {0x0404, "Logical unit not ready, format in progress"}, {0x0405, "Logical unit not ready, rebuild in progress"}, {0x0406, "Logical unit not ready, recalculation in progress"}, {0x0407, "Logical unit not ready, operation in progress"}, {0x0408, "Logical unit not ready, long write in progress"}, {0x0409, "Logical unit not ready, self-test in progress"}, {0x040A, "Logical unit not accessible, asymmetric access state " "transition"}, {0x040B, "Logical unit not accessible, target port in standby state"}, {0x040C, "Logical unit not accessible, target port in unavailable " "state"}, |
b4567ca63 [SCSI] update scs... |
449 |
{0x040D, "Logical unit not ready, structure check required"}, |
1da177e4c Linux-2.6.12-rc2 |
450 451 452 |
{0x0410, "Logical unit not ready, auxiliary memory not accessible"}, {0x0411, "Logical unit not ready, notify (enable spinup) required"}, {0x0412, "Logical unit not ready, offline"}, |
b4567ca63 [SCSI] update scs... |
453 454 |
{0x0413, "Logical unit not ready, SA creation in progress"}, {0x0414, "Logical unit not ready, space allocation in progress"}, |
1da177e4c Linux-2.6.12-rc2 |
455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 |
{0x0500, "Logical unit does not respond to selection"}, {0x0600, "No reference position found"}, {0x0700, "Multiple peripheral devices selected"}, {0x0800, "Logical unit communication failure"}, {0x0801, "Logical unit communication time-out"}, {0x0802, "Logical unit communication parity error"}, {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"}, {0x0804, "Unreachable copy target"}, {0x0900, "Track following error"}, {0x0901, "Tracking servo failure"}, {0x0902, "Focus servo failure"}, {0x0903, "Spindle servo failure"}, {0x0904, "Head select fault"}, {0x0A00, "Error log overflow"}, {0x0B00, "Warning"}, {0x0B01, "Warning - specified temperature exceeded"}, {0x0B02, "Warning - enclosure degraded"}, |
a507c6a2d [SCSI] update add... |
479 480 481 |
{0x0B03, "Warning - background self-test failed"}, {0x0B04, "Warning - background pre-scan detected medium error"}, {0x0B05, "Warning - background medium scan detected medium error"}, |
b4567ca63 [SCSI] update scs... |
482 483 484 |
{0x0B06, "Warning - non-volatile cache now volatile"}, {0x0B07, "Warning - degraded power to non-volatile cache"}, {0x0B08, "Warning - power loss expected"}, |
1da177e4c Linux-2.6.12-rc2 |
485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 |
{0x0C00, "Write error"}, {0x0C01, "Write error - recovered with auto reallocation"}, {0x0C02, "Write error - auto reallocation failed"}, {0x0C03, "Write error - recommend reassignment"}, {0x0C04, "Compression check miscompare error"}, {0x0C05, "Data expansion occurred during compression"}, {0x0C06, "Block not compressible"}, {0x0C07, "Write error - recovery needed"}, {0x0C08, "Write error - recovery failed"}, {0x0C09, "Write error - loss of streaming"}, {0x0C0A, "Write error - padding blocks added"}, {0x0C0B, "Auxiliary memory write error"}, {0x0C0C, "Write error - unexpected unsolicited data"}, {0x0C0D, "Write error - not enough unsolicited data"}, |
a507c6a2d [SCSI] update add... |
500 |
{0x0C0F, "Defects in error window"}, |
1da177e4c Linux-2.6.12-rc2 |
501 502 503 504 505 506 507 508 509 510 511 |
{0x0D00, "Error detected by third party temporary initiator"}, {0x0D01, "Third party device failure"}, {0x0D02, "Copy target device not reachable"}, {0x0D03, "Incorrect copy target device type"}, {0x0D04, "Copy target device data underrun"}, {0x0D05, "Copy target device data overrun"}, {0x0E00, "Invalid information unit"}, {0x0E01, "Information unit too short"}, {0x0E02, "Information unit too long"}, |
a507c6a2d [SCSI] update add... |
512 |
{0x0E03, "Invalid field in command information unit"}, |
1da177e4c Linux-2.6.12-rc2 |
513 514 |
{0x1000, "Id CRC or ECC error"}, |
a507c6a2d [SCSI] update add... |
515 516 517 |
{0x1001, "Logical block guard check failed"}, {0x1002, "Logical block application tag check failed"}, {0x1003, "Logical block reference tag check failed"}, |
1da177e4c Linux-2.6.12-rc2 |
518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 |
{0x1100, "Unrecovered read error"}, {0x1101, "Read retries exhausted"}, {0x1102, "Error too long to correct"}, {0x1103, "Multiple read errors"}, {0x1104, "Unrecovered read error - auto reallocate failed"}, {0x1105, "L-EC uncorrectable error"}, {0x1106, "CIRC unrecovered error"}, {0x1107, "Data re-synchronization error"}, {0x1108, "Incomplete block read"}, {0x1109, "No gap found"}, {0x110A, "Miscorrected error"}, {0x110B, "Unrecovered read error - recommend reassignment"}, {0x110C, "Unrecovered read error - recommend rewrite the data"}, {0x110D, "De-compression CRC error"}, {0x110E, "Cannot decompress using declared algorithm"}, {0x110F, "Error reading UPC/EAN number"}, {0x1110, "Error reading ISRC number"}, {0x1111, "Read error - loss of streaming"}, {0x1112, "Auxiliary memory read error"}, {0x1113, "Read error - failed retransmission request"}, |
a507c6a2d [SCSI] update add... |
539 |
{0x1114, "Read error - lba marked bad by application client"}, |
1da177e4c Linux-2.6.12-rc2 |
540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 |
{0x1200, "Address mark not found for id field"}, {0x1300, "Address mark not found for data field"}, {0x1400, "Recorded entity not found"}, {0x1401, "Record not found"}, {0x1402, "Filemark or setmark not found"}, {0x1403, "End-of-data not found"}, {0x1404, "Block sequence error"}, {0x1405, "Record not found - recommend reassignment"}, {0x1406, "Record not found - data auto-reallocated"}, {0x1407, "Locate operation failure"}, {0x1500, "Random positioning error"}, {0x1501, "Mechanical positioning error"}, {0x1502, "Positioning error detected by read of medium"}, {0x1600, "Data synchronization mark error"}, {0x1601, "Data sync error - data rewritten"}, {0x1602, "Data sync error - recommend rewrite"}, {0x1603, "Data sync error - data auto-reallocated"}, {0x1604, "Data sync error - recommend reassignment"}, {0x1700, "Recovered data with no error correction applied"}, {0x1701, "Recovered data with retries"}, {0x1702, "Recovered data with positive head offset"}, {0x1703, "Recovered data with negative head offset"}, {0x1704, "Recovered data with retries and/or circ applied"}, {0x1705, "Recovered data using previous sector id"}, {0x1706, "Recovered data without ECC - data auto-reallocated"}, {0x1707, "Recovered data without ECC - recommend reassignment"}, {0x1708, "Recovered data without ECC - recommend rewrite"}, {0x1709, "Recovered data without ECC - data rewritten"}, {0x1800, "Recovered data with error correction applied"}, {0x1801, "Recovered data with error corr. & retries applied"}, {0x1802, "Recovered data - data auto-reallocated"}, {0x1803, "Recovered data with CIRC"}, {0x1804, "Recovered data with L-EC"}, {0x1805, "Recovered data - recommend reassignment"}, {0x1806, "Recovered data - recommend rewrite"}, {0x1807, "Recovered data with ECC - data rewritten"}, {0x1808, "Recovered data with linking"}, {0x1900, "Defect list error"}, {0x1901, "Defect list not available"}, {0x1902, "Defect list error in primary list"}, {0x1903, "Defect list error in grown list"}, {0x1A00, "Parameter list length error"}, {0x1B00, "Synchronous data transfer error"}, {0x1C00, "Defect list not found"}, {0x1C01, "Primary defect list not found"}, {0x1C02, "Grown defect list not found"}, {0x1D00, "Miscompare during verify operation"}, |
b4567ca63 [SCSI] update scs... |
599 |
{0x1D01, "Miscompare verify of unmapped LBA"}, |
1da177e4c Linux-2.6.12-rc2 |
600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 |
{0x1E00, "Recovered id with ECC correction"}, {0x1F00, "Partial defect list transfer"}, {0x2000, "Invalid command operation code"}, {0x2001, "Access denied - initiator pending-enrolled"}, {0x2002, "Access denied - no access rights"}, {0x2003, "Access denied - invalid mgmt id key"}, {0x2004, "Illegal command while in write capable state"}, {0x2005, "Obsolete"}, {0x2006, "Illegal command while in explicit address mode"}, {0x2007, "Illegal command while in implicit address mode"}, {0x2008, "Access denied - enrollment conflict"}, {0x2009, "Access denied - invalid LU identifier"}, {0x200A, "Access denied - invalid proxy token"}, {0x200B, "Access denied - ACL LUN conflict"}, {0x2100, "Logical block address out of range"}, {0x2101, "Invalid element address"}, {0x2102, "Invalid address for write"}, |
a507c6a2d [SCSI] update add... |
621 |
{0x2103, "Invalid write crossing layer jump"}, |
1da177e4c Linux-2.6.12-rc2 |
622 623 624 625 626 |
{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, {0x2400, "Invalid field in cdb"}, {0x2401, "CDB decryption error"}, |
a507c6a2d [SCSI] update add... |
627 628 |
{0x2402, "Obsolete"}, {0x2403, "Obsolete"}, |
1da177e4c Linux-2.6.12-rc2 |
629 630 631 632 |
{0x2404, "Security audit value frozen"}, {0x2405, "Security working key frozen"}, {0x2406, "Nonce not unique"}, {0x2407, "Nonce timestamp out of range"}, |
b4567ca63 [SCSI] update scs... |
633 |
{0x2408, "Invalid XCDB"}, |
1da177e4c Linux-2.6.12-rc2 |
634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 |
{0x2500, "Logical unit not supported"}, {0x2600, "Invalid field in parameter list"}, {0x2601, "Parameter not supported"}, {0x2602, "Parameter value invalid"}, {0x2603, "Threshold parameters not supported"}, {0x2604, "Invalid release of persistent reservation"}, {0x2605, "Data decryption error"}, {0x2606, "Too many target descriptors"}, {0x2607, "Unsupported target descriptor type code"}, {0x2608, "Too many segment descriptors"}, {0x2609, "Unsupported segment descriptor type code"}, {0x260A, "Unexpected inexact segment"}, {0x260B, "Inline data length exceeded"}, {0x260C, "Invalid operation for copy source or destination"}, {0x260D, "Copy segment granularity violation"}, {0x260E, "Invalid parameter while port is enabled"}, |
a507c6a2d [SCSI] update add... |
652 653 654 655 |
{0x260F, "Invalid data-out buffer integrity check value"}, {0x2610, "Data decryption key fail limit reached"}, {0x2611, "Incomplete key-associated data set"}, {0x2612, "Vendor specific key reference not found"}, |
1da177e4c Linux-2.6.12-rc2 |
656 657 658 659 660 661 662 663 |
{0x2700, "Write protected"}, {0x2701, "Hardware write protected"}, {0x2702, "Logical unit software write protected"}, {0x2703, "Associated write protect"}, {0x2704, "Persistent write protect"}, {0x2705, "Permanent write protect"}, {0x2706, "Conditional write protect"}, |
b4567ca63 [SCSI] update scs... |
664 |
{0x2707, "Space allocation failed write protect"}, |
1da177e4c Linux-2.6.12-rc2 |
665 666 667 |
{0x2800, "Not ready to ready change, medium may have changed"}, {0x2801, "Import or export element accessed"}, |
a507c6a2d [SCSI] update add... |
668 |
{0x2802, "Format-layer may have changed"}, |
b4567ca63 [SCSI] update scs... |
669 |
{0x2803, "Import/export element accessed, medium changed"}, |
1da177e4c Linux-2.6.12-rc2 |
670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 |
{0x2900, "Power on, reset, or bus device reset occurred"}, {0x2901, "Power on occurred"}, {0x2902, "Scsi bus reset occurred"}, {0x2903, "Bus device reset function occurred"}, {0x2904, "Device internal reset"}, {0x2905, "Transceiver mode changed to single-ended"}, {0x2906, "Transceiver mode changed to lvd"}, {0x2907, "I_T nexus loss occurred"}, {0x2A00, "Parameters changed"}, {0x2A01, "Mode parameters changed"}, {0x2A02, "Log parameters changed"}, {0x2A03, "Reservations preempted"}, {0x2A04, "Reservations released"}, {0x2A05, "Registrations preempted"}, {0x2A06, "Asymmetric access state changed"}, {0x2A07, "Implicit asymmetric access state transition failed"}, {0x2A08, "Priority changed"}, {0x2A09, "Capacity data has changed"}, |
b4567ca63 [SCSI] update scs... |
690 691 692 693 |
{0x2A0A, "Error history I_T nexus cleared"}, {0x2A0B, "Error history snapshot released"}, {0x2A0C, "Error recovery attributes have changed"}, {0x2A0D, "Data encryption capabilities changed"}, |
a507c6a2d [SCSI] update add... |
694 695 696 697 698 |
{0x2A10, "Timestamp changed"}, {0x2A11, "Data encryption parameters changed by another i_t nexus"}, {0x2A12, "Data encryption parameters changed by vendor specific " "event"}, {0x2A13, "Data encryption key instance counter has changed"}, |
b4567ca63 [SCSI] update scs... |
699 |
{0x2A14, "SA creation capabilities data has changed"}, |
1da177e4c Linux-2.6.12-rc2 |
700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 |
{0x2B00, "Copy cannot execute since host cannot disconnect"}, {0x2C00, "Command sequence error"}, {0x2C01, "Too many windows specified"}, {0x2C02, "Invalid combination of windows specified"}, {0x2C03, "Current program area is not empty"}, {0x2C04, "Current program area is empty"}, {0x2C05, "Illegal power condition request"}, {0x2C06, "Persistent prevent conflict"}, {0x2C07, "Previous busy status"}, {0x2C08, "Previous task set full status"}, {0x2C09, "Previous reservation conflict status"}, {0x2C0A, "Partition or collection contains user objects"}, {0x2C0B, "Not reserved"}, {0x2D00, "Overwrite error on update in place"}, {0x2E00, "Insufficient time for operation"}, {0x2F00, "Commands cleared by another initiator"}, |
a507c6a2d [SCSI] update add... |
721 |
{0x2F01, "Commands cleared by power loss notification"}, |
62d42a627 [SCSI] constants.... |
722 |
{0x2F02, "Commands cleared by device server"}, |
1da177e4c Linux-2.6.12-rc2 |
723 724 725 726 727 728 729 730 731 732 733 734 |
{0x3000, "Incompatible medium installed"}, {0x3001, "Cannot read medium - unknown format"}, {0x3002, "Cannot read medium - incompatible format"}, {0x3003, "Cleaning cartridge installed"}, {0x3004, "Cannot write medium - unknown format"}, {0x3005, "Cannot write medium - incompatible format"}, {0x3006, "Cannot format medium - incompatible medium"}, {0x3007, "Cleaning failure"}, {0x3008, "Cannot write - application code mismatch"}, {0x3009, "Current session not fixated for append"}, {0x300A, "Cleaning request rejected"}, |
a507c6a2d [SCSI] update add... |
735 736 |
{0x300C, "WORM medium - overwrite attempted"}, {0x300D, "WORM medium - integrity check"}, |
1da177e4c Linux-2.6.12-rc2 |
737 |
{0x3010, "Medium not formatted"}, |
b4567ca63 [SCSI] update scs... |
738 739 |
{0x3011, "Incompatible volume type"}, {0x3012, "Incompatible volume qualifier"}, |
1da177e4c Linux-2.6.12-rc2 |
740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 |
{0x3100, "Medium format corrupted"}, {0x3101, "Format command failed"}, {0x3102, "Zoned formatting failed due to spare linking"}, {0x3200, "No defect spare location available"}, {0x3201, "Defect list update failure"}, {0x3300, "Tape length error"}, {0x3400, "Enclosure failure"}, {0x3500, "Enclosure services failure"}, {0x3501, "Unsupported enclosure function"}, {0x3502, "Enclosure services unavailable"}, {0x3503, "Enclosure services transfer failure"}, {0x3504, "Enclosure services transfer refused"}, {0x3505, "Enclosure services checksum error"}, {0x3600, "Ribbon, ink, or toner failure"}, {0x3700, "Rounded parameter"}, {0x3800, "Event status notification"}, {0x3802, "Esn - power management class event"}, {0x3804, "Esn - media class event"}, {0x3806, "Esn - device busy class event"}, |
deb1cb63d [SCSI] Log thin p... |
767 |
{0x3807, "Thin Provisioning soft threshold reached"}, |
1da177e4c Linux-2.6.12-rc2 |
768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 |
{0x3900, "Saving parameters not supported"}, {0x3A00, "Medium not present"}, {0x3A01, "Medium not present - tray closed"}, {0x3A02, "Medium not present - tray open"}, {0x3A03, "Medium not present - loadable"}, {0x3A04, "Medium not present - medium auxiliary memory accessible"}, {0x3B00, "Sequential positioning error"}, {0x3B01, "Tape position error at beginning-of-medium"}, {0x3B02, "Tape position error at end-of-medium"}, {0x3B03, "Tape or electronic vertical forms unit not ready"}, {0x3B04, "Slew failure"}, {0x3B05, "Paper jam"}, {0x3B06, "Failed to sense top-of-form"}, {0x3B07, "Failed to sense bottom-of-form"}, {0x3B08, "Reposition error"}, {0x3B09, "Read past end of medium"}, {0x3B0A, "Read past beginning of medium"}, {0x3B0B, "Position past end of medium"}, {0x3B0C, "Position past beginning of medium"}, {0x3B0D, "Medium destination element full"}, {0x3B0E, "Medium source element empty"}, {0x3B0F, "End of medium reached"}, {0x3B11, "Medium magazine not accessible"}, {0x3B12, "Medium magazine removed"}, {0x3B13, "Medium magazine inserted"}, {0x3B14, "Medium magazine locked"}, {0x3B15, "Medium magazine unlocked"}, {0x3B16, "Mechanical positioning or changer error"}, {0x3B17, "Read past end of user object"}, |
b4567ca63 [SCSI] update scs... |
800 801 802 803 |
{0x3B18, "Element disabled"}, {0x3B19, "Element enabled"}, {0x3B1A, "Data transfer device removed"}, {0x3B1B, "Data transfer device inserted"}, |
1da177e4c Linux-2.6.12-rc2 |
804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 |
{0x3D00, "Invalid bits in identify message"}, {0x3E00, "Logical unit has not self-configured yet"}, {0x3E01, "Logical unit failure"}, {0x3E02, "Timeout on logical unit"}, {0x3E03, "Logical unit failed self-test"}, {0x3E04, "Logical unit unable to update self-test log"}, {0x3F00, "Target operating conditions have changed"}, {0x3F01, "Microcode has been changed"}, {0x3F02, "Changed operating definition"}, {0x3F03, "Inquiry data has changed"}, {0x3F04, "Component device attached"}, {0x3F05, "Device identifier changed"}, {0x3F06, "Redundancy group created or modified"}, {0x3F07, "Redundancy group deleted"}, {0x3F08, "Spare created or modified"}, {0x3F09, "Spare deleted"}, {0x3F0A, "Volume set created or modified"}, {0x3F0B, "Volume set deleted"}, {0x3F0C, "Volume set deassigned"}, {0x3F0D, "Volume set reassigned"}, {0x3F0E, "Reported luns data has changed"}, {0x3F0F, "Echo buffer overwritten"}, {0x3F10, "Medium loadable"}, {0x3F11, "Medium auxiliary memory accessible"}, |
a507c6a2d [SCSI] update add... |
831 832 833 |
{0x3F12, "iSCSI IP address added"}, {0x3F13, "iSCSI IP address removed"}, {0x3F14, "iSCSI IP address changed"}, |
1da177e4c Linux-2.6.12-rc2 |
834 835 836 837 838 839 840 841 842 |
/* * {0x40NN, "Ram failure"}, * {0x40NN, "Diagnostic failure on component nn"}, * {0x41NN, "Data path failure"}, * {0x42NN, "Power-on or self-test failure"}, */ {0x4300, "Message error"}, {0x4400, "Internal target failure"}, |
a507c6a2d [SCSI] update add... |
843 |
{0x4471, "ATA device failed set features"}, |
1da177e4c Linux-2.6.12-rc2 |
844 845 846 847 848 849 850 851 |
{0x4500, "Select or reselect failure"}, {0x4600, "Unsuccessful soft reset"}, {0x4700, "Scsi parity error"}, {0x4701, "Data phase CRC error detected"}, {0x4702, "Scsi parity error detected during st data phase"}, |
a507c6a2d [SCSI] update add... |
852 |
{0x4703, "Information unit iuCRC error detected"}, |
1da177e4c Linux-2.6.12-rc2 |
853 854 |
{0x4704, "Asynchronous information protection error detected"}, {0x4705, "Protocol service CRC error"}, |
a507c6a2d [SCSI] update add... |
855 |
{0x4706, "Phy test function in progress"}, |
1da177e4c Linux-2.6.12-rc2 |
856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 |
{0x477f, "Some commands cleared by iSCSI Protocol event"}, {0x4800, "Initiator detected error message received"}, {0x4900, "Invalid message error"}, {0x4A00, "Command phase error"}, {0x4B00, "Data phase error"}, {0x4B01, "Invalid target port transfer tag received"}, {0x4B02, "Too much write data"}, {0x4B03, "Ack/nak timeout"}, {0x4B04, "Nak received"}, {0x4B05, "Data offset error"}, {0x4B06, "Initiator response timeout"}, {0x4C00, "Logical unit failed self-configuration"}, /* * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"}, */ {0x4E00, "Overlapped commands attempted"}, {0x5000, "Write append error"}, {0x5001, "Write append position error"}, {0x5002, "Position error related to timing"}, {0x5100, "Erase failure"}, {0x5101, "Erase failure - incomplete erase operation detected"}, {0x5200, "Cartridge fault"}, {0x5300, "Media load or eject failed"}, {0x5301, "Unload tape failure"}, {0x5302, "Medium removal prevented"}, |
a507c6a2d [SCSI] update add... |
890 891 |
{0x5303, "Medium removal prevented by data transfer element"}, {0x5304, "Medium thread or unthread failure"}, |
1da177e4c Linux-2.6.12-rc2 |
892 893 894 895 896 897 898 899 900 901 902 |
{0x5400, "Scsi to host system interface failure"}, {0x5500, "System resource failure"}, {0x5501, "System buffer full"}, {0x5502, "Insufficient reservation resources"}, {0x5503, "Insufficient resources"}, {0x5504, "Insufficient registration resources"}, {0x5505, "Insufficient access control resources"}, {0x5506, "Auxiliary memory out of space"}, {0x5507, "Quota error"}, |
a507c6a2d [SCSI] update add... |
903 |
{0x5508, "Maximum number of supplemental decryption keys exceeded"}, |
b4567ca63 [SCSI] update scs... |
904 905 |
{0x5509, "Medium auxiliary memory not accessible"}, {0x550A, "Data currently unavailable"}, |
1da177e4c Linux-2.6.12-rc2 |
906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 |
{0x5700, "Unable to recover table-of-contents"}, {0x5800, "Generation does not exist"}, {0x5900, "Updated block read"}, {0x5A00, "Operator request or state change input"}, {0x5A01, "Operator medium removal request"}, {0x5A02, "Operator selected write protect"}, {0x5A03, "Operator selected write permit"}, {0x5B00, "Log exception"}, {0x5B01, "Threshold condition met"}, {0x5B02, "Log counter at maximum"}, {0x5B03, "Log list codes exhausted"}, {0x5C00, "Rpl status change"}, {0x5C01, "Spindles synchronized"}, {0x5C02, "Spindles not synchronized"}, {0x5D00, "Failure prediction threshold exceeded"}, {0x5D01, "Media failure prediction threshold exceeded"}, {0x5D02, "Logical unit failure prediction threshold exceeded"}, {0x5D03, "Spare area exhaustion prediction threshold exceeded"}, {0x5D10, "Hardware impending failure general hard drive failure"}, {0x5D11, "Hardware impending failure drive error rate too high"}, {0x5D12, "Hardware impending failure data error rate too high"}, {0x5D13, "Hardware impending failure seek error rate too high"}, {0x5D14, "Hardware impending failure too many block reassigns"}, {0x5D15, "Hardware impending failure access times too high"}, {0x5D16, "Hardware impending failure start unit times too high"}, {0x5D17, "Hardware impending failure channel parametrics"}, {0x5D18, "Hardware impending failure controller detected"}, {0x5D19, "Hardware impending failure throughput performance"}, {0x5D1A, "Hardware impending failure seek time performance"}, {0x5D1B, "Hardware impending failure spin-up retry count"}, {0x5D1C, "Hardware impending failure drive calibration retry count"}, {0x5D20, "Controller impending failure general hard drive failure"}, {0x5D21, "Controller impending failure drive error rate too high"}, {0x5D22, "Controller impending failure data error rate too high"}, {0x5D23, "Controller impending failure seek error rate too high"}, {0x5D24, "Controller impending failure too many block reassigns"}, {0x5D25, "Controller impending failure access times too high"}, {0x5D26, "Controller impending failure start unit times too high"}, {0x5D27, "Controller impending failure channel parametrics"}, {0x5D28, "Controller impending failure controller detected"}, {0x5D29, "Controller impending failure throughput performance"}, {0x5D2A, "Controller impending failure seek time performance"}, {0x5D2B, "Controller impending failure spin-up retry count"}, {0x5D2C, "Controller impending failure drive calibration retry count"}, {0x5D30, "Data channel impending failure general hard drive failure"}, {0x5D31, "Data channel impending failure drive error rate too high"}, {0x5D32, "Data channel impending failure data error rate too high"}, {0x5D33, "Data channel impending failure seek error rate too high"}, {0x5D34, "Data channel impending failure too many block reassigns"}, {0x5D35, "Data channel impending failure access times too high"}, {0x5D36, "Data channel impending failure start unit times too high"}, {0x5D37, "Data channel impending failure channel parametrics"}, {0x5D38, "Data channel impending failure controller detected"}, {0x5D39, "Data channel impending failure throughput performance"}, {0x5D3A, "Data channel impending failure seek time performance"}, {0x5D3B, "Data channel impending failure spin-up retry count"}, {0x5D3C, "Data channel impending failure drive calibration retry " "count"}, {0x5D40, "Servo impending failure general hard drive failure"}, {0x5D41, "Servo impending failure drive error rate too high"}, {0x5D42, "Servo impending failure data error rate too high"}, {0x5D43, "Servo impending failure seek error rate too high"}, {0x5D44, "Servo impending failure too many block reassigns"}, {0x5D45, "Servo impending failure access times too high"}, {0x5D46, "Servo impending failure start unit times too high"}, {0x5D47, "Servo impending failure channel parametrics"}, {0x5D48, "Servo impending failure controller detected"}, {0x5D49, "Servo impending failure throughput performance"}, {0x5D4A, "Servo impending failure seek time performance"}, {0x5D4B, "Servo impending failure spin-up retry count"}, {0x5D4C, "Servo impending failure drive calibration retry count"}, {0x5D50, "Spindle impending failure general hard drive failure"}, {0x5D51, "Spindle impending failure drive error rate too high"}, {0x5D52, "Spindle impending failure data error rate too high"}, {0x5D53, "Spindle impending failure seek error rate too high"}, {0x5D54, "Spindle impending failure too many block reassigns"}, {0x5D55, "Spindle impending failure access times too high"}, {0x5D56, "Spindle impending failure start unit times too high"}, {0x5D57, "Spindle impending failure channel parametrics"}, {0x5D58, "Spindle impending failure controller detected"}, {0x5D59, "Spindle impending failure throughput performance"}, {0x5D5A, "Spindle impending failure seek time performance"}, {0x5D5B, "Spindle impending failure spin-up retry count"}, {0x5D5C, "Spindle impending failure drive calibration retry count"}, {0x5D60, "Firmware impending failure general hard drive failure"}, {0x5D61, "Firmware impending failure drive error rate too high"}, {0x5D62, "Firmware impending failure data error rate too high"}, {0x5D63, "Firmware impending failure seek error rate too high"}, {0x5D64, "Firmware impending failure too many block reassigns"}, {0x5D65, "Firmware impending failure access times too high"}, {0x5D66, "Firmware impending failure start unit times too high"}, {0x5D67, "Firmware impending failure channel parametrics"}, {0x5D68, "Firmware impending failure controller detected"}, {0x5D69, "Firmware impending failure throughput performance"}, {0x5D6A, "Firmware impending failure seek time performance"}, {0x5D6B, "Firmware impending failure spin-up retry count"}, {0x5D6C, "Firmware impending failure drive calibration retry count"}, {0x5DFF, "Failure prediction threshold exceeded (false)"}, {0x5E00, "Low power condition on"}, {0x5E01, "Idle condition activated by timer"}, {0x5E02, "Standby condition activated by timer"}, {0x5E03, "Idle condition activated by command"}, {0x5E04, "Standby condition activated by command"}, |
b4567ca63 [SCSI] update scs... |
1017 1018 1019 1020 1021 1022 |
{0x5E05, "Idle_b condition activated by timer"}, {0x5E06, "Idle_b condition activated by command"}, {0x5E07, "Idle_c condition activated by timer"}, {0x5E08, "Idle_c condition activated by command"}, {0x5E09, "Standby_y condition activated by timer"}, {0x5E0A, "Standby_y condition activated by command"}, |
1da177e4c Linux-2.6.12-rc2 |
1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 |
{0x5E41, "Power state change to active"}, {0x5E42, "Power state change to idle"}, {0x5E43, "Power state change to standby"}, {0x5E45, "Power state change to sleep"}, {0x5E47, "Power state change to device control"}, {0x6000, "Lamp failure"}, {0x6100, "Video acquisition error"}, {0x6101, "Unable to acquire video"}, {0x6102, "Out of focus"}, {0x6200, "Scan head positioning error"}, {0x6300, "End of user area encountered on this track"}, {0x6301, "Packet does not fit in available space"}, {0x6400, "Illegal mode for this track"}, {0x6401, "Invalid packet size"}, {0x6500, "Voltage fault"}, {0x6600, "Automatic document feeder cover up"}, {0x6601, "Automatic document feeder lift up"}, {0x6602, "Document jam in automatic document feeder"}, {0x6603, "Document miss feed automatic in document feeder"}, {0x6700, "Configuration failure"}, {0x6701, "Configuration of incapable logical units failed"}, {0x6702, "Add logical unit failed"}, {0x6703, "Modification of logical unit failed"}, {0x6704, "Exchange of logical unit failed"}, {0x6705, "Remove of logical unit failed"}, {0x6706, "Attachment of logical unit failed"}, {0x6707, "Creation of logical unit failed"}, {0x6708, "Assign failure occurred"}, {0x6709, "Multiply assigned logical unit"}, {0x670A, "Set target port groups command failed"}, |
a507c6a2d [SCSI] update add... |
1061 |
{0x670B, "ATA device feature not enabled"}, |
1da177e4c Linux-2.6.12-rc2 |
1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 |
{0x6800, "Logical unit not configured"}, {0x6900, "Data loss on logical unit"}, {0x6901, "Multiple logical unit failures"}, {0x6902, "Parity/data mismatch"}, {0x6A00, "Informational, refer to log"}, {0x6B00, "State change has occurred"}, {0x6B01, "Redundancy level got better"}, {0x6B02, "Redundancy level got worse"}, {0x6C00, "Rebuild failure occurred"}, {0x6D00, "Recalculate failure occurred"}, {0x6E00, "Command to logical unit failed"}, {0x6F00, "Copy protection key exchange failure - authentication " "failure"}, {0x6F01, "Copy protection key exchange failure - key not present"}, {0x6F02, "Copy protection key exchange failure - key not established"}, {0x6F03, "Read of scrambled sector without authentication"}, {0x6F04, "Media region code is mismatched to logical unit region"}, {0x6F05, "Drive region must be permanent/region reset count error"}, |
a507c6a2d [SCSI] update add... |
1088 1089 |
{0x6F06, "Insufficient block count for binding nonce recording"}, {0x6F07, "Conflict in binding nonce recording"}, |
1da177e4c Linux-2.6.12-rc2 |
1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 |
/* * {0x70NN, "Decompression exception short algorithm id of nn"}, */ {0x7100, "Decompression exception long algorithm id"}, {0x7200, "Session fixation error"}, {0x7201, "Session fixation error writing lead-in"}, {0x7202, "Session fixation error writing lead-out"}, {0x7203, "Session fixation error - incomplete track in session"}, {0x7204, "Empty or partially written reserved track"}, {0x7205, "No more track reservations allowed"}, |
a507c6a2d [SCSI] update add... |
1101 1102 |
{0x7206, "RMZ extension is not allowed"}, {0x7207, "No more test zone extensions are allowed"}, |
1da177e4c Linux-2.6.12-rc2 |
1103 1104 1105 1106 1107 1108 1109 1110 |
{0x7300, "Cd control error"}, {0x7301, "Power calibration area almost full"}, {0x7302, "Power calibration area is full"}, {0x7303, "Power calibration area error"}, {0x7304, "Program memory area update failure"}, {0x7305, "Program memory area is full"}, {0x7306, "RMA/PMA is almost full"}, |
a507c6a2d [SCSI] update add... |
1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 |
{0x7310, "Current power calibration area almost full"}, {0x7311, "Current power calibration area is full"}, {0x7317, "RDZ is full"}, {0x7400, "Security error"}, {0x7401, "Unable to decrypt data"}, {0x7402, "Unencrypted data encountered while decrypting"}, {0x7403, "Incorrect data encryption key"}, {0x7404, "Cryptographic integrity validation failed"}, {0x7405, "Error decrypting data"}, |
b4567ca63 [SCSI] update scs... |
1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 |
{0x7406, "Unknown signature verification key"}, {0x7407, "Encryption parameters not useable"}, {0x7408, "Digital signature validation failure"}, {0x7409, "Encryption mode mismatch on read"}, {0x740A, "Encrypted block not raw read enabled"}, {0x740B, "Incorrect Encryption parameters"}, {0x740C, "Unable to decrypt parameter list"}, {0x740D, "Encryption algorithm disabled"}, {0x7410, "SA creation parameter value invalid"}, {0x7411, "SA creation parameter value rejected"}, {0x7412, "Invalid SA usage"}, {0x7421, "Data Encryption configuration prevented"}, {0x7430, "SA creation parameter not supported"}, {0x7440, "Authentication failed"}, {0x7461, "External data encryption key manager access error"}, {0x7462, "External data encryption key manager error"}, {0x7463, "External data encryption key not found"}, {0x7464, "External data encryption request not authorized"}, {0x746E, "External data encryption control timeout"}, {0x746F, "External data encryption control error"}, |
a507c6a2d [SCSI] update add... |
1141 |
{0x7471, "Logical unit access not authorized"}, |
b4567ca63 [SCSI] update scs... |
1142 |
{0x7479, "Security conflict in translated device"}, |
a507c6a2d [SCSI] update add... |
1143 |
|
1da177e4c Linux-2.6.12-rc2 |
1144 1145 1146 1147 1148 1149 1150 |
{0, NULL} }; struct error_info2 { unsigned char code1, code2_min, code2_max; const char * fmt; }; |
0ad78200b [SCSI] Mark some ... |
1151 |
static const struct error_info2 additional2[] = |
1da177e4c Linux-2.6.12-rc2 |
1152 |
{ |
b4567ca63 [SCSI] update scs... |
1153 1154 1155 1156 1157 1158 |
{0x40, 0x00, 0x7f, "Ram failure (%x)"}, {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"}, {0x41, 0x00, 0xff, "Data path failure (%x)"}, {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"}, {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"}, {0x70, 0x00, 0xff, "Decompression exception short algorithm id of %x"}, |
1da177e4c Linux-2.6.12-rc2 |
1159 1160 1161 1162 |
{0, 0, 0, NULL} }; /* description of the sense key values */ |
0ad78200b [SCSI] Mark some ... |
1163 |
static const char * const snstext[] = { |
1da177e4c Linux-2.6.12-rc2 |
1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 |
"No Sense", /* 0: There is no sense information */ "Recovered Error", /* 1: The last command completed successfully but used error correction */ "Not Ready", /* 2: The addressed target is not ready */ "Medium Error", /* 3: Data error detected on the medium */ "Hardware Error", /* 4: Controller or device failure */ "Illegal Request", /* 5: Error in request */ "Unit Attention", /* 6: Removable medium was changed, or the target has been reset, or ... */ "Data Protect", /* 7: Access to the data is blocked */ "Blank Check", /* 8: Reached unexpected written or unwritten region of the medium */ "Vendor Specific(9)", "Copy Aborted", /* A: COPY or COMPARE was aborted */ "Aborted Command", /* B: The target aborted the command */ "Equal", /* C: A SEARCH DATA command found data equal */ "Volume Overflow", /* D: Medium full with still data to be written */ "Miscompare", /* E: Source data and data on the medium do not agree */ }; #endif /* Get sense key string or NULL if not available */ const char * scsi_sense_key_string(unsigned char key) { #ifdef CONFIG_SCSI_CONSTANTS if (key <= 0xE) return snstext[key]; #endif return NULL; } EXPORT_SYMBOL(scsi_sense_key_string); /* * Get additional sense code string or NULL if not available. * This string may contain a "%x" and should be printed with ascq as arg. */ const char * scsi_extd_sense_format(unsigned char asc, unsigned char ascq) { #ifdef CONFIG_SCSI_CONSTANTS int i; unsigned short code = ((asc << 8) | ascq); |
b4567ca63 [SCSI] update scs... |
1206 |
for (i = 0; additional[i].text; i++) |
1da177e4c Linux-2.6.12-rc2 |
1207 1208 |
if (additional[i].code12 == code) return additional[i].text; |
b4567ca63 [SCSI] update scs... |
1209 |
for (i = 0; additional2[i].fmt; i++) { |
1da177e4c Linux-2.6.12-rc2 |
1210 |
if (additional2[i].code1 == asc && |
b4567ca63 [SCSI] update scs... |
1211 1212 |
ascq >= additional2[i].code2_min && ascq <= additional2[i].code2_max) |
1da177e4c Linux-2.6.12-rc2 |
1213 |
return additional2[i].fmt; |
b4567ca63 [SCSI] update scs... |
1214 |
} |
1da177e4c Linux-2.6.12-rc2 |
1215 1216 1217 1218 |
#endif return NULL; } EXPORT_SYMBOL(scsi_extd_sense_format); |
684b7fe97 [SCSI] constants.... |
1219 |
void |
1da177e4c Linux-2.6.12-rc2 |
1220 1221 |
scsi_show_extd_sense(unsigned char asc, unsigned char ascq) { |
684b7fe97 [SCSI] constants.... |
1222 |
const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq); |
1da177e4c Linux-2.6.12-rc2 |
1223 1224 1225 |
if (extd_sense_fmt) { if (strstr(extd_sense_fmt, "%x")) { |
684b7fe97 [SCSI] constants.... |
1226 |
printk("Add. Sense: "); |
1da177e4c Linux-2.6.12-rc2 |
1227 1228 |
printk(extd_sense_fmt, ascq); } else |
684b7fe97 [SCSI] constants.... |
1229 |
printk("Add. Sense: %s", extd_sense_fmt); |
1da177e4c Linux-2.6.12-rc2 |
1230 1231 |
} else { if (asc >= 0x80) |
684b7fe97 [SCSI] constants.... |
1232 1233 |
printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc, ascq); |
1da177e4c Linux-2.6.12-rc2 |
1234 |
if (ascq >= 0x80) |
684b7fe97 [SCSI] constants.... |
1235 1236 |
printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc, ascq); |
1da177e4c Linux-2.6.12-rc2 |
1237 1238 1239 |
else printk("ASC=0x%x ASCQ=0x%x", asc, ascq); } |
684b7fe97 [SCSI] constants.... |
1240 1241 1242 |
printk(" "); |
1da177e4c Linux-2.6.12-rc2 |
1243 |
} |
684b7fe97 [SCSI] constants.... |
1244 |
EXPORT_SYMBOL(scsi_show_extd_sense); |
1da177e4c Linux-2.6.12-rc2 |
1245 |
|
ea73a9f23 [SCSI] convert sd... |
1246 |
void |
684b7fe97 [SCSI] constants.... |
1247 |
scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr) |
ea73a9f23 [SCSI] convert sd... |
1248 1249 |
{ const char *sense_txt; |
ea73a9f23 [SCSI] convert sd... |
1250 1251 1252 |
sense_txt = scsi_sense_key_string(sshdr->sense_key); if (sense_txt) |
684b7fe97 [SCSI] constants.... |
1253 |
printk("Sense Key : %s ", sense_txt); |
ea73a9f23 [SCSI] convert sd... |
1254 |
else |
684b7fe97 [SCSI] constants.... |
1255 1256 1257 1258 1259 1260 1261 |
printk("Sense Key : 0x%x ", sshdr->sense_key); printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " : "[current] "); if (sshdr->response_code >= 0x72) printk("[descriptor]"); |
ea73a9f23 [SCSI] convert sd... |
1262 1263 1264 |
printk(" "); } |
684b7fe97 [SCSI] constants.... |
1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 |
EXPORT_SYMBOL(scsi_show_sense_hdr); /* * Print normalized SCSI sense header with a prefix. */ void scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr) { printk(KERN_INFO "%s: ", name); scsi_show_sense_hdr(sshdr); printk(KERN_INFO "%s: ", name); scsi_show_extd_sense(sshdr->asc, sshdr->ascq); } |
ea73a9f23 [SCSI] convert sd... |
1278 |
EXPORT_SYMBOL(scsi_print_sense_hdr); |
311b581e1 [SCSI] Fix device... |
1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 |
/* * Print normalized SCSI sense header with device information and a prefix. */ void scsi_cmd_print_sense_hdr(struct scsi_cmnd *scmd, const char *desc, struct scsi_sense_hdr *sshdr) { scmd_printk(KERN_INFO, scmd, "%s: ", desc); scsi_show_sense_hdr(sshdr); scmd_printk(KERN_INFO, scmd, "%s: ", desc); scsi_show_extd_sense(sshdr->asc, sshdr->ascq); } EXPORT_SYMBOL(scsi_cmd_print_sense_hdr); |
8f8bf7e64 [SCSI] make scsi_... |
1292 |
static void |
684b7fe97 [SCSI] constants.... |
1293 1294 |
scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len, struct scsi_sense_hdr *sshdr) |
1da177e4c Linux-2.6.12-rc2 |
1295 1296 |
{ int k, num, res; |
1da177e4c Linux-2.6.12-rc2 |
1297 |
|
684b7fe97 [SCSI] constants.... |
1298 |
res = scsi_normalize_sense(sense_buffer, sense_len, sshdr); |
1da177e4c Linux-2.6.12-rc2 |
1299 1300 1301 |
if (0 == res) { /* this may be SCSI-1 sense data */ num = (sense_len < 32) ? sense_len : 32; |
684b7fe97 [SCSI] constants.... |
1302 |
printk("Unrecognized sense data (in hex):"); |
1da177e4c Linux-2.6.12-rc2 |
1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 |
for (k = 0; k < num; ++k) { if (0 == (k % 16)) { printk(" "); printk(KERN_INFO " "); } printk("%02x ", sense_buffer[k]); } printk(" "); return; } |
684b7fe97 [SCSI] constants.... |
1315 |
} |
8f8bf7e64 [SCSI] make scsi_... |
1316 |
static void |
684b7fe97 [SCSI] constants.... |
1317 1318 1319 1320 1321 1322 1323 |
scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len, struct scsi_sense_hdr *sshdr) { int k, num, res; if (sshdr->response_code < 0x72) { |
1da177e4c Linux-2.6.12-rc2 |
1324 1325 1326 |
/* only decode extras for "fixed" format now */ char buff[80]; int blen, fixed_valid; |
684b7fe97 [SCSI] constants.... |
1327 |
unsigned int info; |
1da177e4c Linux-2.6.12-rc2 |
1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 |
fixed_valid = sense_buffer[0] & 0x80; info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) | (sense_buffer[5] << 8) | sense_buffer[6]); res = 0; memset(buff, 0, sizeof(buff)); blen = sizeof(buff) - 1; if (fixed_valid) res += snprintf(buff + res, blen - res, "Info fld=0x%x", info); if (sense_buffer[2] & 0x80) { /* current command has read a filemark */ if (res > 0) res += snprintf(buff + res, blen - res, ", "); res += snprintf(buff + res, blen - res, "FMK"); } if (sense_buffer[2] & 0x40) { /* end-of-medium condition exists */ if (res > 0) res += snprintf(buff + res, blen - res, ", "); res += snprintf(buff + res, blen - res, "EOM"); } if (sense_buffer[2] & 0x20) { /* incorrect block length requested */ if (res > 0) res += snprintf(buff + res, blen - res, ", "); res += snprintf(buff + res, blen - res, "ILI"); } if (res > 0) |
684b7fe97 [SCSI] constants.... |
1357 1358 1359 |
printk("%s ", buff); } else if (sshdr->additional_length > 0) { |
1da177e4c Linux-2.6.12-rc2 |
1360 |
/* descriptor format with sense descriptors */ |
684b7fe97 [SCSI] constants.... |
1361 |
num = 8 + sshdr->additional_length; |
1da177e4c Linux-2.6.12-rc2 |
1362 |
num = (sense_len < num) ? sense_len : num; |
684b7fe97 [SCSI] constants.... |
1363 1364 |
printk("Descriptor sense data with sense descriptors " "(in hex):"); |
1da177e4c Linux-2.6.12-rc2 |
1365 1366 1367 1368 1369 1370 1371 1372 |
for (k = 0; k < num; ++k) { if (0 == (k % 16)) { printk(" "); printk(KERN_INFO " "); } printk("%02x ", sense_buffer[k]); } |
684b7fe97 [SCSI] constants.... |
1373 |
|
1da177e4c Linux-2.6.12-rc2 |
1374 1375 1376 |
printk(" "); } |
684b7fe97 [SCSI] constants.... |
1377 |
|
1da177e4c Linux-2.6.12-rc2 |
1378 |
} |
1da177e4c Linux-2.6.12-rc2 |
1379 |
|
684b7fe97 [SCSI] constants.... |
1380 1381 1382 |
/* Normalize and print sense buffer with name prefix */ void __scsi_print_sense(const char *name, const unsigned char *sense_buffer, int sense_len) |
1da177e4c Linux-2.6.12-rc2 |
1383 |
{ |
684b7fe97 [SCSI] constants.... |
1384 1385 1386 1387 1388 1389 1390 1391 |
struct scsi_sense_hdr sshdr; printk(KERN_INFO "%s: ", name); scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr); scsi_show_sense_hdr(&sshdr); scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr); printk(KERN_INFO "%s: ", name); scsi_show_extd_sense(sshdr.asc, sshdr.ascq); |
1da177e4c Linux-2.6.12-rc2 |
1392 |
} |
684b7fe97 [SCSI] constants.... |
1393 |
EXPORT_SYMBOL(__scsi_print_sense); |
1da177e4c Linux-2.6.12-rc2 |
1394 |
|
684b7fe97 [SCSI] constants.... |
1395 1396 |
/* Normalize and print sense buffer in SCSI command */ void scsi_print_sense(char *name, struct scsi_cmnd *cmd) |
1da177e4c Linux-2.6.12-rc2 |
1397 |
{ |
684b7fe97 [SCSI] constants.... |
1398 |
struct scsi_sense_hdr sshdr; |
6f131ce1d [SCSI] Fix warnin... |
1399 |
scmd_printk(KERN_INFO, cmd, " "); |
684b7fe97 [SCSI] constants.... |
1400 1401 1402 1403 1404 |
scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE, &sshdr); scsi_show_sense_hdr(&sshdr); scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE, &sshdr); |
6f131ce1d [SCSI] Fix warnin... |
1405 |
scmd_printk(KERN_INFO, cmd, " "); |
684b7fe97 [SCSI] constants.... |
1406 |
scsi_show_extd_sense(sshdr.asc, sshdr.ascq); |
1da177e4c Linux-2.6.12-rc2 |
1407 |
} |
684b7fe97 [SCSI] constants.... |
1408 |
EXPORT_SYMBOL(scsi_print_sense); |
1da177e4c Linux-2.6.12-rc2 |
1409 1410 |
#ifdef CONFIG_SCSI_CONSTANTS |
0ad78200b [SCSI] Mark some ... |
1411 |
static const char * const hostbyte_table[]={ |
6391a1137 [SCSI] drivers/sc... |
1412 |
"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", |
1da177e4c Linux-2.6.12-rc2 |
1413 |
"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", |
a4dfaa6f2 [SCSI] scsi: add ... |
1414 1415 |
"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE", "DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST" }; |
6391a1137 [SCSI] drivers/sc... |
1416 |
#define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table) |
1da177e4c Linux-2.6.12-rc2 |
1417 |
|
0ad78200b [SCSI] Mark some ... |
1418 |
static const char * const driverbyte_table[]={ |
6391a1137 [SCSI] drivers/sc... |
1419 |
"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", |
1da177e4c Linux-2.6.12-rc2 |
1420 |
"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; |
6391a1137 [SCSI] drivers/sc... |
1421 |
#define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table) |
1da177e4c Linux-2.6.12-rc2 |
1422 |
|
684b7fe97 [SCSI] constants.... |
1423 |
void scsi_show_result(int result) |
1da177e4c Linux-2.6.12-rc2 |
1424 |
{ |
684b7fe97 [SCSI] constants.... |
1425 |
int hb = host_byte(result); |
1c9fbafc8 [SCSI] Remove SUG... |
1426 |
int db = driver_byte(result); |
1da177e4c Linux-2.6.12-rc2 |
1427 |
|
1c9fbafc8 [SCSI] Remove SUG... |
1428 1429 |
printk("Result: hostbyte=%s driverbyte=%s ", |
684b7fe97 [SCSI] constants.... |
1430 |
(hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"), |
1c9fbafc8 [SCSI] Remove SUG... |
1431 |
(db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid")); |
1da177e4c Linux-2.6.12-rc2 |
1432 |
} |
684b7fe97 [SCSI] constants.... |
1433 |
|
1da177e4c Linux-2.6.12-rc2 |
1434 |
#else |
684b7fe97 [SCSI] constants.... |
1435 1436 |
void scsi_show_result(int result) |
1da177e4c Linux-2.6.12-rc2 |
1437 |
{ |
684b7fe97 [SCSI] constants.... |
1438 1439 1440 |
printk("Result: hostbyte=0x%02x driverbyte=0x%02x ", host_byte(result), driver_byte(result)); |
1da177e4c Linux-2.6.12-rc2 |
1441 |
} |
684b7fe97 [SCSI] constants.... |
1442 |
|
1da177e4c Linux-2.6.12-rc2 |
1443 |
#endif |
684b7fe97 [SCSI] constants.... |
1444 1445 1446 1447 1448 |
EXPORT_SYMBOL(scsi_show_result); void scsi_print_result(struct scsi_cmnd *cmd) { |
6f131ce1d [SCSI] Fix warnin... |
1449 |
scmd_printk(KERN_INFO, cmd, " "); |
684b7fe97 [SCSI] constants.... |
1450 1451 1452 |
scsi_show_result(cmd->result); } EXPORT_SYMBOL(scsi_print_result); |