# ALSA PCI drivers

  config SND_TEA575X
  	tristate
  	depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO || RADIO_SF16FMR2
  	default SND_FM801 || SND_ES1968 || RADIO_SF16FMR2

  menuconfig SND_PCI
  	bool "PCI sound devices"
  	depends on PCI
  	default y
  	help
  	  Support for sound devices connected via the PCI bus.
  
  if SND_PCI

  config SND_AD1889
  	tristate "Analog Devices AD1889"

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the integrated AC97 sound
  	  device found in particular on the Hewlett-Packard [BCJ]-xxx0
  	  class PA-RISC workstations, using the AD1819 codec.
  
  	  To compile this as a module, choose M here: the module
  	  will be called snd-ad1889.

  config SND_ALS300

  	tristate "Avance Logic ALS300/ALS300+"

  	select SND_PCM
  	select SND_AC97_CODEC
  	select SND_OPL3_LIB
  	help
  	  Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+

  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-als300

  config SND_ALS4000
  	tristate "Avance Logic ALS4000"

  	depends on ISA_DMA_API

  	select SND_OPL3_LIB
  	select SND_MPU401_UART
  	select SND_PCM

  	select SND_SB_COMMON

  	help
  	  Say Y here to include support for soundcards based on Avance Logic
  	  ALS4000 chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-als4000.

  config SND_ALI5451
  	tristate "ALi M5451 PCI Audio Controller"

  	select SND_MPU401_UART
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the integrated AC97 sound
  	  device on motherboards using the ALi M5451 Audio Controller
  	  (M1535/M1535D/M1535+/M1535D+ south bridges).  Newer chipsets
  	  use the "Intel/SiS/nVidia/AMD/ALi AC97 Controller" driver.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-ali5451.

  config SND_ASIHPI
  	tristate "AudioScience ASIxxxx"
  	depends on X86
  	select FW_LOADER
  	select SND_PCM
  	select SND_HWDEP
  	help
  	  Say Y here to include support for AudioScience ASI sound cards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-asihpi.

  config SND_ATIIXP
  	tristate "ATI IXP AC97 Controller"

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the integrated AC97 sound
  	  device on motherboards with ATI chipsets (ATI IXP 150/200/250/
  	  300/400).
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-atiixp.
  
  config SND_ATIIXP_MODEM
  	tristate "ATI IXP Modem"

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the integrated MC97 modem on
  	  motherboards with ATI chipsets (ATI IXP 150/200/250).
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-atiixp-modem.
  
  config SND_AU8810

  	tristate "Aureal Advantage"

  	select SND_MPU401_UART
  	select SND_AC97_CODEC

  	help

  	  Say Y here to include support for Aureal Advantage soundcards.
  
  	  Supported features: Hardware Mixer, SRC, EQ and SPDIF output.

  	  3D support code is in place, but not yet useable. For more info,
  	  email the ALSA developer list, or <mjander@users.sourceforge.net>.

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-au8810.

  config SND_AU8820

  	tristate "Aureal Vortex"

  	select SND_MPU401_UART
  	select SND_AC97_CODEC

  	help

  	  Say Y here to include support for Aureal Vortex soundcards.

  	  Supported features: Hardware Mixer and SRC. For more info, email
  	  the ALSA developer list, or <mjander@users.sourceforge.net>.

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-au8820.

  config SND_AU8830

  	tristate "Aureal Vortex 2"

  	select SND_MPU401_UART
  	select SND_AC97_CODEC

  	help

  	  Say Y here to include support for Aureal Vortex 2 soundcards.

  	  Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
  	  3D support code is in place, but not yet useable. For more info,
  	  email the ALSA developer list, or <mjander@users.sourceforge.net>.

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-au8830.

  config SND_AW2
  	tristate "Emagic Audiowerk 2"

  	help
  	  Say Y here to include support for Emagic Audiowerk 2 soundcards.
  
  	  Supported features: Analog and SPDIF output. Analog or SPDIF input.
  	  Note: Switch between analog and digital input does not always work.
  	  It can produce continuous noise. The workaround is to switch again
  	  (and again) between digital and analog input until it works.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-aw2.

  config SND_AZT3328

  	tristate "Aztech AZF3328 / PCI168"

  	select SND_OPL3_LIB
  	select SND_MPU401_UART
  	select SND_PCM

  	select SND_RAWMIDI

  	select SND_AC97_CODEC

  	help
  	  Say Y here to include support for Aztech AZF3328 (PCI168)
  	  soundcards.

  	  Supported features: AC97-"conformant" mixer, MPU401/OPL3, analog I/O
  	  (16bit/8bit, many sample rates [<= 66.2kHz], NO hardware mixing),
  	  Digital Enhanced Game Port, 1.024MHz multimedia sequencer timer,
  	  ext. codec (I2S port), onboard amp (4W/4Ohms/ch), suspend/resume.

  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-azt3328.
  
  config SND_BT87X

  	tristate "Bt87x Audio Capture"

  	select SND_PCM

  	help

  	  If you want to record audio from TV cards based on
  	  Brooktree Bt878/Bt879 chips, say Y here and read
  	  <file:Documentation/sound/alsa/Bt87x.txt>.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-bt87x.
  
  config SND_BT87X_OVERCLOCK
  	bool "Bt87x Audio overclocking"
  	depends on SND_BT87X
  	help
  	  Say Y here if 448000 Hz isn't enough for you and you want to
  	  record from the analog input with up to 1792000 Hz.
  
  	  Higher sample rates won't hurt your hardware, but audio
  	  quality may suffer.

  config SND_CA0106
  	tristate "SB Audigy LS / Live 24bit"

  	select SND_AC97_CODEC
  	select SND_RAWMIDI

  	select SND_VMASTER

  	help
  	  Say Y here to include support for the Sound Blaster Audigy LS
  	  and Live 24bit.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-ca0106.
  
  config SND_CMIPCI

  	tristate "C-Media 8338, 8738, 8768, 8770"

  	select SND_OPL3_LIB
  	select SND_MPU401_UART
  	select SND_PCM
  	help

  	  If you want to use soundcards based on C-Media CMI8338, CMI8738,
  	  CMI8768 or CMI8770 chips, say Y here and read

  	  <file:Documentation/sound/alsa/CMIPCI.txt>.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-cmipci.

  config SND_OXYGEN_LIB
          tristate

  
  config SND_OXYGEN

  	tristate "C-Media 8786, 8787, 8788 (Oxygen)"

  	select SND_OXYGEN_LIB

  	select SND_PCM
  	select SND_MPU401_UART

  	help
  	  Say Y here to include support for sound cards based on the
  	  C-Media CMI8788 (Oxygen HD Audio) chip:
  	   * Asound A-8788

  	   * Asus Xonar DG

  	   * AuzenTech X-Meridian

  	   * AuzenTech X-Meridian 2G

  	   * Bgears b-Enspirer
  	   * Club3D Theatron DTS

  	   * HT-Omega Claro (plus)
  	   * HT-Omega Claro halo (XT)

  	   * Kuroutoshikou CMI8787-HG2PCI

  	   * Razer Barracuda AC-1
  	   * Sondigo Inferno

  	   * TempoTec/MediaTek HiFier Fantasia

  	   * TempoTec/MediaTek HiFier Serenade

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-oxygen.

  config SND_CS4281
  	tristate "Cirrus Logic (Sound Fusion) CS4281"

  	select SND_OPL3_LIB
  	select SND_RAWMIDI
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for Cirrus Logic CS4281 chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-cs4281.

  config SND_CS46XX
  	tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"

  	select SND_RAWMIDI
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for Cirrus Logic CS4610/CS4612/
  	  CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-cs46xx.
  
  config SND_CS46XX_NEW_DSP

  	bool "Cirrus Logic (Sound Fusion) New DSP support"
  	depends on SND_CS46XX

  	default y

  	help
  	  Say Y here to use a new DSP image for SPDIF and dual codecs.
  
  	  This works better than the old code, so say Y.

  config SND_CS5530
  	tristate "CS5530 Audio"

  	depends on ISA_DMA_API

  	select SND_SB16_DSP

  	help
  	  Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-cs5530.

  config SND_CS5535AUDIO

  	tristate "CS5535/CS5536 Audio"

  	select SND_PCM

  	select SND_AC97_CODEC
  	help

  	  Say Y here to include support for audio on CS5535 chips. It is
  	  referred to as NS CS5535 IO or AMD CS5535 IO companion in

  	  various literature. This driver also supports the CS5536 audio
  	  device. However, for both chips, on certain boards, you may

  	  need to use ac97_quirk=hp_only if your board has physically

  	  mapped headphone out to master output. If that works for you,
  	  send lspci -vvv output to the mailing list so that your board
  	  can be identified in the quirks list.

  
  	  To compile this driver as a module, choose M here: the module

  	  will be called snd-cs5535audio.

  config SND_CTXFI
  	tristate "Creative Sound Blaster X-Fi"
  	select SND_PCM
  	help
  	  If you want to use soundcards based on Creative Sound Blastr X-Fi
  	  boards with 20k1 or 20k2 chips, say Y here.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-ctxfi.

  config SND_DARLA20
  	tristate "(Echoaudio) Darla20"

  	select FW_LOADER

  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Darla.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-darla20
  
  config SND_GINA20
  	tristate "(Echoaudio) Gina20"

  	select FW_LOADER

  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Gina.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-gina20
  
  config SND_LAYLA20
  	tristate "(Echoaudio) Layla20"

  	select FW_LOADER

  	select SND_RAWMIDI
  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Layla.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-layla20
  
  config SND_DARLA24
  	tristate "(Echoaudio) Darla24"

  	select FW_LOADER

  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Darla24.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-darla24
  
  config SND_GINA24
  	tristate "(Echoaudio) Gina24"

  	select FW_LOADER

  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Gina24.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-gina24
  
  config SND_LAYLA24
  	tristate "(Echoaudio) Layla24"

  	select FW_LOADER

  	select SND_RAWMIDI
  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Layla24.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-layla24
  
  config SND_MONA
  	tristate "(Echoaudio) Mona"

  	select FW_LOADER

  	select SND_RAWMIDI
  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Mona.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-mona
  
  config SND_MIA
  	tristate "(Echoaudio) Mia"

  	select FW_LOADER

  	select SND_RAWMIDI
  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-mia
  
  config SND_ECHO3G
  	tristate "(Echoaudio) 3G cards"

  	select FW_LOADER

  	select SND_RAWMIDI
  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-echo3g
  
  config SND_INDIGO
  	tristate "(Echoaudio) Indigo"

  	select FW_LOADER

  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Indigo.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-indigo
  
  config SND_INDIGOIO
  	tristate "(Echoaudio) Indigo IO"

  	select FW_LOADER

  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-indigoio
  
  config SND_INDIGODJ
  	tristate "(Echoaudio) Indigo DJ"

  	select FW_LOADER

  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-indigodj

  config SND_INDIGOIOX
  	tristate "(Echoaudio) Indigo IOx"
  	select FW_LOADER
  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Indigo IOx.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-indigoiox
  
  config SND_INDIGODJX
  	tristate "(Echoaudio) Indigo DJx"
  	select FW_LOADER
  	select SND_PCM
  	help
  	  Say 'Y' or 'M' to include support for Echoaudio Indigo DJx.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-indigodjx

  config SND_EMU10K1
  	tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"

  	select FW_LOADER

  	select SND_HWDEP
  	select SND_RAWMIDI
  	select SND_AC97_CODEC
  	help
  	  Say Y to include support for Sound Blaster PCI 512, Live!,
  	  Audigy and E-mu APS (partially supported) soundcards.
  
  	  The confusing multitude of mixer controls is documented in
  	  <file:Documentation/sound/alsa/SB-Live-mixer.txt> and
  	  <file:Documentation/sound/alsa/Audigy-mixer.txt>.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-emu10k1.
  
  config SND_EMU10K1X
  	tristate "Emu10k1X (Dell OEM Version)"

  	select SND_AC97_CODEC
  	select SND_RAWMIDI
  	help
  	  Say Y here to include support for the Dell OEM version of the
  	  Sound Blaster Live!.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-emu10k1x.

  config SND_ENS1370
  	tristate "(Creative) Ensoniq AudioPCI 1370"

  	select SND_RAWMIDI
  	select SND_PCM
  	help
  	  Say Y here to include support for Ensoniq AudioPCI ES1370 chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-ens1370.
  
  config SND_ENS1371
  	tristate "(Creative) Ensoniq AudioPCI 1371/1373"

  	select SND_RAWMIDI
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for Ensoniq AudioPCI ES1371 chips and
  	  Sound Blaster PCI 64 or 128 soundcards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-ens1371.
  
  config SND_ES1938
  	tristate "ESS ES1938/1946/1969 (Solo-1)"

  	select SND_OPL3_LIB
  	select SND_MPU401_UART
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for soundcards based on ESS Solo-1
  	  (ES1938, ES1946, ES1969) chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-es1938.
  
  config SND_ES1968
  	tristate "ESS ES1968/1978 (Maestro-1/2/2E)"

  	select SND_MPU401_UART
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for soundcards based on ESS Maestro
  	  1/2/2E chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-es1968.

  config SND_ES1968_INPUT
  	bool "Enable input device for es1968 volume buttons"
  	depends on SND_ES1968
  	depends on INPUT=y || INPUT=SND_ES1968
  	help
  	  If you say Y here, you will get an input device which reports
  	  keypresses for the volume buttons connected to the es1968 chip.
  	  If you say N the buttons will directly control the master volume.
  	  It is recommended to say Y.

  config SND_ES1968_RADIO
  	bool "Enable TEA5757 radio tuner support for es1968"
  	depends on SND_ES1968
  	depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_ES1968
  	help
  	  Say Y here to include support for TEA5757 radio tuner integrated on
  	  some MediaForte cards (e.g. SF64-PCE2).

  config SND_FM801
  	tristate "ForteMedia FM801"

  	select SND_OPL3_LIB
  	select SND_MPU401_UART
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for soundcards based on the ForteMedia
  	  FM801 chip.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-fm801.

  config SND_FM801_TEA575X_BOOL
  	bool "ForteMedia FM801 + TEA5757 tuner"

  	depends on SND_FM801

  	depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801

  	help
  	  Say Y here to include support for soundcards based on the ForteMedia

  	  FM801 chip with a TEA5757 tuner (MediaForte SF256-PCS, SF256-PCP and
  	  SF64-PCR) into the snd-fm801 driver.

  source "sound/pci/hda/Kconfig"

  config SND_HDSP
  	tristate "RME Hammerfall DSP Audio"

  	select SND_HWDEP
  	select SND_RAWMIDI
  	select SND_PCM
  	help
  	  Say Y here to include support for RME Hammerfall DSP Audio
  	  soundcards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-hdsp.

  comment "Don't forget to add built-in firmwares for HDSP driver"
  	depends on SND_HDSP=y

  config SND_HDSPM

  	tristate "RME Hammerfall DSP MADI/RayDAT/AIO"

  	select SND_HWDEP
  	select SND_RAWMIDI
  	select SND_PCM
  	help

  	  Say Y here to include support for RME Hammerfall DSP MADI,
  	  RayDAT and AIO soundcards.

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-hdspm.

  config SND_ICE1712
  	tristate "ICEnsemble ICE1712 (Envy24)"

  	select SND_MPU401_UART
  	select SND_AC97_CODEC

  	select BITREVERSE

  	help
  	  Say Y here to include support for soundcards based on the
  	  ICE1712 (Envy24) chip.
  
  	  Currently supported hardware is: M-Audio Delta 1010(LT),
  	  DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;

  	  TerraTec EWX 24/96, EWS 88MT/D, DMX 6Fire, Phase 88;
  	  Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8;
  	  Lionstracs Mediastation, Terrasoniq TS 88.

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-ice1712.
  
  config SND_ICE1724
  	tristate "ICE/VT1724/1720 (Envy24HT/PT)"

  	select SND_RAWMIDI

  	select SND_AC97_CODEC

  	select SND_VMASTER

  	help
  	  Say Y here to include support for soundcards based on
  	  ICE/VT1724/1720 (Envy24HT/PT) chips.
  
  	  Currently supported hardware is: AMP AUDIO2000; M-Audio

  	  Revolution 5.1, 7.1, Audiophile 192; TerraTec Aureon 5.1 Sky,
  	  7.1 Space/Universe, Phase 22/28; Onkyo SE-90PCI, SE-200PCI;
  	  AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules
  	  Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal
  	  192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS,
  	  AV-710; Shuttle SN25P.

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-ice1724.
  
  config SND_INTEL8X0
  	tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the integrated AC97 sound
  	  device on motherboards with Intel/SiS/nVidia/AMD chipsets, or
  	  ALi chipsets using the M5455 Audio Controller.  (There is a
  	  separate driver for ALi M5451 Audio Controllers.)
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-intel8x0.
  
  config SND_INTEL8X0M

  	tristate "Intel/SiS/nVidia/AMD MC97 Modem"

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the integrated MC97 modem on
  	  motherboards with Intel/SiS/nVidia/AMD chipsets.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-intel8x0m.

  config SND_KORG1212
  	tristate "Korg 1212 IO"

  	select SND_PCM
  	help
  	  Say Y here to include support for Korg 1212IO soundcards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-korg1212.

  config SND_LOLA
  	tristate "Digigram Lola"
  	select SND_PCM
  	help
  	  Say Y to include support for Digigram Lola boards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-lola.

  config SND_LX6464ES
  	tristate "Digigram LX6464ES"
  	select SND_PCM
  	help
  	  Say Y here to include support for Digigram LX6464ES boards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-lx6464es.

  config SND_MAESTRO3
  	tristate "ESS Allegro/Maestro3"

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for soundcards based on ESS Maestro 3
  	  (Allegro) chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-maestro3.

  config SND_MAESTRO3_INPUT
  	bool "Enable input device for maestro3 volume buttons"
  	depends on SND_MAESTRO3
  	depends on INPUT=y || INPUT=SND_MAESTRO3
  	help
  	  If you say Y here, you will get an input device which reports
  	  keypresses for the volume buttons connected to the maestro3 chip.
  	  If you say N the buttons will directly control the master volume.
  	  It is recommended to say Y.

  config SND_MIXART
  	tristate "Digigram miXart"

  	select SND_HWDEP
  	select SND_PCM
  	help
  	  If you want to use Digigram miXart soundcards, say Y here and
  	  read <file:Documentation/sound/alsa/MIXART.txt>.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-mixart.
  
  config SND_NM256
  	tristate "NeoMagic NM256AV/ZX"

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for NeoMagic NM256AV/ZX chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-nm256.

  config SND_PCXHR
  	tristate "Digigram PCXHR"

  	select SND_PCM
  	select SND_HWDEP
  	help
  	  Say Y here to include support for Digigram PCXHR boards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-pcxhr.

  config SND_RIPTIDE
  	tristate "Conexant Riptide"

  	select FW_LOADER

  	select SND_OPL3_LIB
  	select SND_MPU401_UART
  	select SND_AC97_CODEC
  	help
  	  Say 'Y' or 'M' to include support for Conexant Riptide chip.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-riptide

  config SND_RME32
  	tristate "RME Digi32, 32/8, 32 PRO"

  	select SND_PCM
  	help
  	  Say Y to include support for RME Digi32, Digi32 PRO and
  	  Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio
  	  devices.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-rme32.
  
  config SND_RME96
  	tristate "RME Digi96, 96/8, 96/8 PRO"

  	select SND_PCM
  	help
  	  Say Y here to include support for RME Digi96, Digi96/8 and
  	  Digi96/8 PRO/PAD/PST soundcards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-rme96.
  
  config SND_RME9652
  	tristate "RME Digi9652 (Hammerfall)"

  	select SND_PCM
  	help
  	  Say Y here to include support for RME Hammerfall (RME
  	  Digi9652/Digi9636) soundcards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-rme9652.

  config SND_SIS7019
  	tristate "SiS 7019 Audio Accelerator"

  	depends on X86 && !X86_64

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the SiS 7019 Audio Accelerator.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-sis7019.

  config SND_SONICVIBES
  	tristate "S3 SonicVibes"

  	select SND_OPL3_LIB
  	select SND_MPU401_UART
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for soundcards based on the S3
  	  SonicVibes chip.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-sonicvibes.

  config SND_TRIDENT
  	tristate "Trident 4D-Wave DX/NX; SiS 7018"

  	select SND_MPU401_UART
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for soundcards based on Trident
  	  4D-Wave DX/NX or SiS 7018 chips.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-trident.

  config SND_VIA82XX
  	tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"

  	select SND_MPU401_UART
  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the integrated AC97 sound
  	  device on motherboards with VIA chipsets.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-via82xx.
  
  config SND_VIA82XX_MODEM
  	tristate "VIA 82C686A/B, 8233 based Modems"

  	select SND_AC97_CODEC
  	help
  	  Say Y here to include support for the integrated MC97 modem on
  	  motherboards with VIA chipsets.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-via82xx-modem.

  config SND_VIRTUOSO

  	tristate "Asus Virtuoso 66/100/200 (Xonar)"

  	select SND_OXYGEN_LIB

  	select SND_PCM
  	select SND_MPU401_UART

  	select SND_JACK if INPUT=y || INPUT=SND

  	help
  	  Say Y here to include support for sound cards based on the

  	  Asus AV66/AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, DS,

  	  Essence ST (Deluxe), and Essence STX.

  	  Support for the HDAV1.3 (Deluxe) and HDAV1.3 Slim is experimental;
  	  for the Xense, missing.

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-virtuoso.

  config SND_VX222
  	tristate "Digigram VX222"

  	select SND_VX_LIB
  	help
  	  Say Y here to include support for Digigram VX222 soundcards.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-vx222.

  config SND_YMFPCI
  	tristate "Yamaha YMF724/740/744/754"

  	select SND_OPL3_LIB
  	select SND_MPU401_UART
  	select SND_AC97_CODEC

  	help

  	  Say Y here to include support for Yamaha PCI audio chips -
  	  YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.

  
  	  To compile this driver as a module, choose M here: the module

  	  will be called snd-ymfpci.

  endif	# SND_PCI