/*
   * adm1025.c
   *
   * Copyright (C) 2000       Chen-Yuan Wu <gwu@esoft.com>

   * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>

   *
   * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
   * voltages (including its own power source) and up to two temperatures
   * (its own plus up to one external one). Voltages are scaled internally
   * (which is not the common way) with ratios such that the nominal value
   * of each voltage correspond to a register value of 192 (which means a
   * resolution of about 0.5% of the nominal value). Temperature values are
   * reported with a 1 deg resolution and a 3 deg accuracy. Complete
   * datasheet can be obtained from Analog's website at:
   *   http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
   *
   * This driver also supports the ADM1025A, which differs from the ADM1025
   * only in that it has "open-drain VID inputs while the ADM1025 has
   * on-chip 100k pull-ups on the VID inputs". It doesn't make any
   * difference for us.
   *
   * This driver also supports the NE1619, a sensor chip made by Philips.
   * That chip is similar to the ADM1025A, with a few differences. The only
   * difference that matters to us is that the NE1619 has only two possible
   * addresses while the ADM1025A has a third one. Complete datasheet can be
   * obtained from Philips's website at:
   *   http://www.semiconductors.philips.com/pip/NE1619DS.html
   *
   * Since the ADM1025 was the first chipset supported by this driver, most
   * comments will refer to this chipset, but are actually general and
   * concern all supported chipsets, unless mentioned otherwise.
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License as published by
   * the Free Software Foundation; either version 2 of the License, or
   * (at your option) any later version.
   *
   * This program is distributed in the hope that it will be useful,
   * but WITHOUT ANY WARRANTY; without even the implied warranty of
   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   * GNU General Public License for more details.
   *
   * You should have received a copy of the GNU General Public License
   * along with this program; if not, write to the Free Software
   * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
   */

  #include <linux/module.h>
  #include <linux/init.h>
  #include <linux/slab.h>
  #include <linux/jiffies.h>
  #include <linux/i2c.h>

  #include <linux/hwmon.h>

  #include <linux/hwmon-sysfs.h>

  #include <linux/hwmon-vid.h>

  #include <linux/err.h>

  #include <linux/mutex.h>

  
  /*
   * Addresses to scan
   * ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e.
   * NE1619 has two possible addresses: 0x2c and 0x2d.
   */

  static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };

  enum chips { adm1025, ne1619 };

  
  /*
   * The ADM1025 registers
   */
  
  #define ADM1025_REG_MAN_ID		0x3E

  #define ADM1025_REG_CHIP_ID		0x3F

  #define ADM1025_REG_CONFIG		0x40
  #define ADM1025_REG_STATUS1		0x41
  #define ADM1025_REG_STATUS2		0x42
  #define ADM1025_REG_IN(nr)		(0x20 + (nr))
  #define ADM1025_REG_IN_MAX(nr)		(0x2B + (nr) * 2)
  #define ADM1025_REG_IN_MIN(nr)		(0x2C + (nr) * 2)
  #define ADM1025_REG_TEMP(nr)		(0x26 + (nr))
  #define ADM1025_REG_TEMP_HIGH(nr)	(0x37 + (nr) * 2)
  #define ADM1025_REG_TEMP_LOW(nr)	(0x38 + (nr) * 2)
  #define ADM1025_REG_VID			0x47
  #define ADM1025_REG_VID4		0x49
  
  /*
   * Conversions and various macros
   * The ADM1025 uses signed 8-bit values for temperatures.
   */

  static const int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };

  
  #define IN_FROM_REG(reg,scale)	(((reg) * (scale) + 96) / 192)
  #define IN_TO_REG(val,scale)	((val) <= 0 ? 0 : \
  				 (val) * 192 >= (scale) * 255 ? 255 : \
  				 ((val) * 192 + (scale)/2) / (scale))
  
  #define TEMP_FROM_REG(reg)	((reg) * 1000)
  #define TEMP_TO_REG(val)	((val) <= -127500 ? -128 : \
  				 (val) >= 126500 ? 127 : \
  				 (((val) < 0 ? (val)-500 : (val)+500) / 1000))
  
  /*
   * Functions declaration
   */

  static int adm1025_probe(struct i2c_client *client,
  			 const struct i2c_device_id *id);

  static int adm1025_detect(struct i2c_client *client,

  			  struct i2c_board_info *info);

  static void adm1025_init_client(struct i2c_client *client);

  static int adm1025_remove(struct i2c_client *client);

  static struct adm1025_data *adm1025_update_device(struct device *dev);
  
  /*
   * Driver data (common to all clients)
   */

  static const struct i2c_device_id adm1025_id[] = {
  	{ "adm1025", adm1025 },
  	{ "ne1619", ne1619 },
  	{ }
  };
  MODULE_DEVICE_TABLE(i2c, adm1025_id);

  static struct i2c_driver adm1025_driver = {

  	.class		= I2C_CLASS_HWMON,

  	.driver = {

  		.name	= "adm1025",
  	},

  	.probe		= adm1025_probe,
  	.remove		= adm1025_remove,
  	.id_table	= adm1025_id,
  	.detect		= adm1025_detect,

  	.address_list	= normal_i2c,

  };
  
  /*
   * Client data (each client gets its own)
   */
  
  struct adm1025_data {

  	struct device *hwmon_dev;

  	struct mutex update_lock;

  	char valid; /* zero until following fields are valid */
  	unsigned long last_updated; /* in jiffies */
  
  	u8 in[6];		/* register value */
  	u8 in_max[6];		/* register value */
  	u8 in_min[6];		/* register value */
  	s8 temp[2];		/* register value */
  	s8 temp_min[2];		/* register value */
  	s8 temp_max[2];		/* register value */
  	u16 alarms;		/* register values, combined */
  	u8 vid;			/* register values, combined */
  	u8 vrm;
  };
  
  /*
   * Sysfs stuff
   */

  static ssize_t
  show_in(struct device *dev, struct device_attribute *attr, char *buf)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%u
  ", IN_FROM_REG(data->in[index],
  		       in_scale[index]));
  }
  
  static ssize_t
  show_in_min(struct device *dev, struct device_attribute *attr, char *buf)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%u
  ", IN_FROM_REG(data->in_min[index],
  		       in_scale[index]));
  }
  
  static ssize_t
  show_in_max(struct device *dev, struct device_attribute *attr, char *buf)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%u
  ", IN_FROM_REG(data->in_max[index],
  		       in_scale[index]));
  }
  
  static ssize_t
  show_temp(struct device *dev, struct device_attribute *attr, char *buf)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%d
  ", TEMP_FROM_REG(data->temp[index]));
  }
  
  static ssize_t
  show_temp_min(struct device *dev, struct device_attribute *attr, char *buf)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%d
  ", TEMP_FROM_REG(data->temp_min[index]));
  }
  
  static ssize_t
  show_temp_max(struct device *dev, struct device_attribute *attr, char *buf)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%d
  ", TEMP_FROM_REG(data->temp_max[index]));
  }
  
  static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
  			  const char *buf, size_t count)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct i2c_client *client = to_i2c_client(dev);
  	struct adm1025_data *data = i2c_get_clientdata(client);
  	long val = simple_strtol(buf, NULL, 10);
  
  	mutex_lock(&data->update_lock);
  	data->in_min[index] = IN_TO_REG(val, in_scale[index]);
  	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(index),
  				  data->in_min[index]);
  	mutex_unlock(&data->update_lock);
  	return count;
  }
  
  static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
  			  const char *buf, size_t count)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct i2c_client *client = to_i2c_client(dev);
  	struct adm1025_data *data = i2c_get_clientdata(client);
  	long val = simple_strtol(buf, NULL, 10);
  
  	mutex_lock(&data->update_lock);
  	data->in_max[index] = IN_TO_REG(val, in_scale[index]);
  	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(index),
  				  data->in_max[index]);
  	mutex_unlock(&data->update_lock);
  	return count;
  }

  
  #define set_in(offset) \

  static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
  	show_in, NULL, offset); \
  static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
  	show_in_min, set_in_min, offset); \
  static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
  	show_in_max, set_in_max, offset)

  set_in(0);
  set_in(1);
  set_in(2);
  set_in(3);
  set_in(4);
  set_in(5);

  static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
  			    const char *buf, size_t count)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct i2c_client *client = to_i2c_client(dev);
  	struct adm1025_data *data = i2c_get_clientdata(client);
  	long val = simple_strtol(buf, NULL, 10);
  
  	mutex_lock(&data->update_lock);
  	data->temp_min[index] = TEMP_TO_REG(val);
  	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(index),
  				  data->temp_min[index]);
  	mutex_unlock(&data->update_lock);
  	return count;
  }
  
  static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
  	const char *buf, size_t count)
  {
  	int index = to_sensor_dev_attr(attr)->index;
  	struct i2c_client *client = to_i2c_client(dev);
  	struct adm1025_data *data = i2c_get_clientdata(client);
  	long val = simple_strtol(buf, NULL, 10);
  
  	mutex_lock(&data->update_lock);
  	data->temp_max[index] = TEMP_TO_REG(val);
  	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(index),
  				  data->temp_max[index]);
  	mutex_unlock(&data->update_lock);
  	return count;
  }

  #define set_temp(offset) \

  static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
  	show_temp, NULL, offset - 1); \
  static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
  	show_temp_min, set_temp_min, offset - 1); \
  static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
  	show_temp_max, set_temp_max, offset - 1)

  set_temp(1);
  set_temp(2);

  static ssize_t
  show_alarms(struct device *dev, struct device_attribute *attr, char *buf)

  {
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%u
  ", data->alarms);
  }
  static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);

  static ssize_t
  show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
  {
  	int bitnr = to_sensor_dev_attr(attr)->index;
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%u
  ", (data->alarms >> bitnr) & 1);
  }
  static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
  static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
  static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
  static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
  static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
  static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
  static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 5);
  static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 4);
  static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14);

  static ssize_t
  show_vid(struct device *dev, struct device_attribute *attr, char *buf)

  {
  	struct adm1025_data *data = adm1025_update_device(dev);
  	return sprintf(buf, "%u
  ", vid_from_reg(data->vid, data->vrm));
  }

  static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);

  static ssize_t
  show_vrm(struct device *dev, struct device_attribute *attr, char *buf)

  {

  	struct adm1025_data *data = dev_get_drvdata(dev);

  	return sprintf(buf, "%u
  ", data->vrm);
  }

  static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
  		       const char *buf, size_t count)

  {

  	struct adm1025_data *data = dev_get_drvdata(dev);

  	data->vrm = simple_strtoul(buf, NULL, 10);
  	return count;
  }
  static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
  
  /*
   * Real code
   */

  static struct attribute *adm1025_attributes[] = {

  	&sensor_dev_attr_in0_input.dev_attr.attr,
  	&sensor_dev_attr_in1_input.dev_attr.attr,
  	&sensor_dev_attr_in2_input.dev_attr.attr,
  	&sensor_dev_attr_in3_input.dev_attr.attr,
  	&sensor_dev_attr_in5_input.dev_attr.attr,
  	&sensor_dev_attr_in0_min.dev_attr.attr,
  	&sensor_dev_attr_in1_min.dev_attr.attr,
  	&sensor_dev_attr_in2_min.dev_attr.attr,
  	&sensor_dev_attr_in3_min.dev_attr.attr,
  	&sensor_dev_attr_in5_min.dev_attr.attr,
  	&sensor_dev_attr_in0_max.dev_attr.attr,
  	&sensor_dev_attr_in1_max.dev_attr.attr,
  	&sensor_dev_attr_in2_max.dev_attr.attr,
  	&sensor_dev_attr_in3_max.dev_attr.attr,
  	&sensor_dev_attr_in5_max.dev_attr.attr,

  	&sensor_dev_attr_in0_alarm.dev_attr.attr,
  	&sensor_dev_attr_in1_alarm.dev_attr.attr,
  	&sensor_dev_attr_in2_alarm.dev_attr.attr,
  	&sensor_dev_attr_in3_alarm.dev_attr.attr,
  	&sensor_dev_attr_in5_alarm.dev_attr.attr,

  	&sensor_dev_attr_temp1_input.dev_attr.attr,
  	&sensor_dev_attr_temp2_input.dev_attr.attr,
  	&sensor_dev_attr_temp1_min.dev_attr.attr,
  	&sensor_dev_attr_temp2_min.dev_attr.attr,
  	&sensor_dev_attr_temp1_max.dev_attr.attr,
  	&sensor_dev_attr_temp2_max.dev_attr.attr,

  	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
  	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
  	&sensor_dev_attr_temp1_fault.dev_attr.attr,

  	&dev_attr_alarms.attr,
  	&dev_attr_cpu0_vid.attr,
  	&dev_attr_vrm.attr,
  	NULL
  };
  
  static const struct attribute_group adm1025_group = {
  	.attrs = adm1025_attributes,
  };

  static struct attribute *adm1025_attributes_in4[] = {

  	&sensor_dev_attr_in4_input.dev_attr.attr,
  	&sensor_dev_attr_in4_min.dev_attr.attr,
  	&sensor_dev_attr_in4_max.dev_attr.attr,

  	&sensor_dev_attr_in4_alarm.dev_attr.attr,

  	NULL
  };

  static const struct attribute_group adm1025_group_in4 = {
  	.attrs = adm1025_attributes_in4,

  };

  /* Return 0 if detection is successful, -ENODEV otherwise */

  static int adm1025_detect(struct i2c_client *client,

  			  struct i2c_board_info *info)

  {

  	struct i2c_adapter *adapter = client->adapter;

  	const char *name;
  	u8 man_id, chip_id;

  
  	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))

  		return -ENODEV;

  	/* Check for unused bits */
  	if ((i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG) & 0x80)
  	 || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS1) & 0xC0)
  	 || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS2) & 0xBC)) {
  		dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x
  ",
  			client->addr);
  		return -ENODEV;

  	}

  	/* Identification */
  	chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
  	if ((chip_id & 0xF0) != 0x20)
  		return -ENODEV;

  	man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
  	if (man_id == 0x41)

  		name = "adm1025";

  	else if (man_id == 0xA1 && client->addr != 0x2E)

  		name = "ne1619";

  	else
  		return -ENODEV;

  	strlcpy(info->type, name, I2C_NAME_SIZE);

  	return 0;
  }

  static int adm1025_probe(struct i2c_client *client,
  			 const struct i2c_device_id *id)
  {
  	struct adm1025_data *data;
  	int err;
  	u8 config;
  
  	data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL);
  	if (!data) {
  		err = -ENOMEM;
  		goto exit;
  	}
  
  	i2c_set_clientdata(client, data);
  	mutex_init(&data->update_lock);

  
  	/* Initialize the ADM1025 chip */

  	adm1025_init_client(client);

  
  	/* Register sysfs hooks */

  	if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group)))

  		goto exit_free;

  
  	/* Pin 11 is either in4 (+12V) or VID4 */

  	config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);

  	if (!(config & 0x20)) {

  		if ((err = sysfs_create_group(&client->dev.kobj,
  					      &adm1025_group_in4)))

  			goto exit_remove;
  	}

  	data->hwmon_dev = hwmon_device_register(&client->dev);

  	if (IS_ERR(data->hwmon_dev)) {
  		err = PTR_ERR(data->hwmon_dev);

  		goto exit_remove;

  	}
  
  	return 0;

  exit_remove:

  	sysfs_remove_group(&client->dev.kobj, &adm1025_group);
  	sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);

  exit_free:
  	kfree(data);
  exit:
  	return err;
  }
  
  static void adm1025_init_client(struct i2c_client *client)
  {
  	u8 reg;
  	struct adm1025_data *data = i2c_get_clientdata(client);
  	int i;

  	data->vrm = vid_which_vrm();

  
  	/*
  	 * Set high limits
  	 * Usually we avoid setting limits on driver init, but it happens
  	 * that the ADM1025 comes with stupid default limits (all registers
  	 * set to 0). In case the chip has not gone through any limit
  	 * setting yet, we better set the high limits to the max so that
  	 * no alarm triggers.
  	 */
  	for (i=0; i<6; i++) {
  		reg = i2c_smbus_read_byte_data(client,
  					       ADM1025_REG_IN_MAX(i));
  		if (reg == 0)
  			i2c_smbus_write_byte_data(client,
  						  ADM1025_REG_IN_MAX(i),
  						  0xFF);
  	}
  	for (i=0; i<2; i++) {
  		reg = i2c_smbus_read_byte_data(client,
  					       ADM1025_REG_TEMP_HIGH(i));
  		if (reg == 0)
  			i2c_smbus_write_byte_data(client,
  						  ADM1025_REG_TEMP_HIGH(i),
  						  0x7F);
  	}
  
  	/*
  	 * Start the conversions
  	 */
  	reg = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
  	if (!(reg & 0x01))
  		i2c_smbus_write_byte_data(client, ADM1025_REG_CONFIG,
  					  (reg&0x7E)|0x01);
  }

  static int adm1025_remove(struct i2c_client *client)

  {

  	struct adm1025_data *data = i2c_get_clientdata(client);

  	hwmon_device_unregister(data->hwmon_dev);

  	sysfs_remove_group(&client->dev.kobj, &adm1025_group);

  	sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);

  	kfree(data);

  	return 0;
  }
  
  static struct adm1025_data *adm1025_update_device(struct device *dev)
  {
  	struct i2c_client *client = to_i2c_client(dev);
  	struct adm1025_data *data = i2c_get_clientdata(client);

  	mutex_lock(&data->update_lock);

  
  	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
  		int i;
  
  		dev_dbg(&client->dev, "Updating data.
  ");
  		for (i=0; i<6; i++) {
  			data->in[i] = i2c_smbus_read_byte_data(client,
  				      ADM1025_REG_IN(i));
  			data->in_min[i] = i2c_smbus_read_byte_data(client,
  					  ADM1025_REG_IN_MIN(i));
  			data->in_max[i] = i2c_smbus_read_byte_data(client,
  					  ADM1025_REG_IN_MAX(i));
  		}
  		for (i=0; i<2; i++) {
  			data->temp[i] = i2c_smbus_read_byte_data(client,
  					ADM1025_REG_TEMP(i));
  			data->temp_min[i] = i2c_smbus_read_byte_data(client,
  					    ADM1025_REG_TEMP_LOW(i));
  			data->temp_max[i] = i2c_smbus_read_byte_data(client,
  					    ADM1025_REG_TEMP_HIGH(i));
  		}
  		data->alarms = i2c_smbus_read_byte_data(client,
  			       ADM1025_REG_STATUS1)
  			     | (i2c_smbus_read_byte_data(client,
  				ADM1025_REG_STATUS2) << 8);
  		data->vid = (i2c_smbus_read_byte_data(client,
  			     ADM1025_REG_VID) & 0x0f)
  			  | ((i2c_smbus_read_byte_data(client,
  			      ADM1025_REG_VID4) & 0x01) << 4);
  
  		data->last_updated = jiffies;
  		data->valid = 1;
  	}

  	mutex_unlock(&data->update_lock);

  
  	return data;
  }
  
  static int __init sensors_adm1025_init(void)
  {
  	return i2c_add_driver(&adm1025_driver);
  }
  
  static void __exit sensors_adm1025_exit(void)
  {
  	i2c_del_driver(&adm1025_driver);
  }
  
  MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
  MODULE_DESCRIPTION("ADM1025 driver");
  MODULE_LICENSE("GPL");
  
  module_init(sensors_adm1025_init);
  module_exit(sensors_adm1025_exit);