menuconfig UIO

  	tristate "Userspace I/O drivers"

  	depends on MMU

  	help
  	  Enable this to allow the userspace driver core code to be
  	  built.  This code allows userspace programs easy access to
  	  kernel interrupts and memory locations, allowing some drivers
  	  to be written in userspace.  Note that a small kernel driver
  	  is also required for interrupt handling to work properly.
  
  	  If you don't know what to do here, say N.

  if UIO

  config UIO_CIF
  	tristate "generic Hilscher CIF Card driver"

  	depends on PCI

  	help
  	  Driver for Hilscher CIF DeviceNet and Profibus cards.  This

    	  driver requires a userspace component called cif that handles
  	  all of the heavy lifting and can be found at:
  	        <http://www.osadl.org/projects/downloads/UIO/user/>

  
  	  To compile this driver as a module, choose M here: the module
  	  will be called uio_cif.

  config UIO_PDRV_GENIRQ
  	tristate "Userspace I/O platform driver with generic IRQ handling"
  	help
  	  Platform driver for Userspace I/O devices, including generic
  	  interrupt handling code. Shared interrupts are not supported.
  
  	  This kernel driver requires that the matching userspace driver
  	  handles interrupts in a special way. Userspace is responsible
  	  for acknowledging the hardware device if needed, and re-enabling
  	  interrupts in the interrupt controller using the write() syscall.
  
  	  If you don't know what to do here, say N.

  config UIO_DMEM_GENIRQ
  	tristate "Userspace platform driver with generic irq and dynamic memory"

  	depends on HAS_DMA

  	help
  	  Platform driver for Userspace I/O devices, including generic
  	  interrupt handling code. Shared interrupts are not supported.
  
  	  Memory regions can be specified with the same platform device
  	  resources as the UIO_PDRV drivers, but dynamic regions can also
  	  be specified.
  	  The number and size of these regions is static,
  	  but the memory allocation is not performed until
  	  the associated device file is opened. The
  	  memory is freed once the uio device is closed.
  
  	  If you don't know what to do here, say N.

  config UIO_AEC
  	tristate "AEC video timestamp device"
  	depends on PCI

  	help
  
  	  UIO driver for the Adrienne Electronics Corporation PCI time
  	  code device.
  
  	  This device differs from other UIO devices since it uses I/O
  	  ports instead of memory mapped I/O. In order to make it
  	  possible for UIO to work with this device a utility, uioport,
  	  can be used to read and write the ports:
  
  	    git clone git://ifup.org/philips/uioport.git
  
  	  If you compile this as a module, it will be called uio_aec.

  config UIO_SERCOS3
  	tristate "Automata Sercos III PCI card driver"

  	depends on PCI

  	help
  	  Userspace I/O interface for the Sercos III PCI card from
  	  Automata GmbH. The userspace part of this driver will be
  	  available for download from the Automata GmbH web site.
  
  	  Automata GmbH:        http://www.automataweb.com
  	  Sercos III interface: http://www.sercos.com
  
  	  If you compile this as a module, it will be called uio_sercos3.

  config UIO_PCI_GENERIC
  	tristate "Generic driver for PCI 2.3 and PCI Express cards"
  	depends on PCI

  	help
  	  Generic driver that you can bind, dynamically, to any
  	  PCI 2.3 compliant and PCI Express card. It is useful,
  	  primarily, for virtualization scenarios.
  	  If you compile this as a module, it will be called uio_pci_generic.

  config UIO_NETX
  	tristate "Hilscher NetX Card driver"
  	depends on PCI
  	help
  	  Driver for Hilscher NetX based fieldbus cards (cifX, comX).
  	  This driver requires a userspace component that comes with the card
  	  or is available from Hilscher (http://www.hilscher.com).
  
  	  To compile this driver as a module, choose M here; the module
  	  will be called uio_netx.

  config UIO_FSL_ELBC_GPCM
  	tristate "eLBC/GPCM driver"
  	depends on FSL_LBC
  	help
  	  Generic driver for accessing a peripheral connected to an eLBC port
  	  that is running in GPCM mode. GPCM is an interface for simple lower
  	  performance memories and memory-mapped devices. For devices using
  	  FCM or UPM eLBC modes, other device-specific drivers are available.
  
  config UIO_FSL_ELBC_GPCM_NETX5152
  	bool "eLBC/GPCM netX 51/52 support"
  	depends on UIO_FSL_ELBC_GPCM
  	help
  	  This will add support for netX 51/52 devices connected via eLBC/GPCM.
  	  In particular, it implements interrupt handling. This can be used
  	  together with the userspace netX stack from Hilscher.
  
  	  Information about this hardware can be found at:
  	  http://www.hilscher.com/netx

  config UIO_PRUSS
  	tristate "Texas Instruments PRUSS driver"

  	select GENERIC_ALLOCATOR

  	depends on HAS_IOMEM && HAS_DMA

  	help
  	  PRUSS driver for OMAPL138/DA850/AM18XX devices
  	  PRUSS driver requires user space components, examples and user space
  	  driver is available from below SVN repo - you may use anonymous login
  
  	  https://gforge.ti.com/gf/project/pru_sw/
  
  	  More info on API is available at below wiki
  
  	  http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called uio_pruss.

  config UIO_MF624
  	tristate "Humusoft MF624 DAQ PCI card driver"
  	depends on PCI
  	help
  	  Userspace I/O interface for the Humusoft MF624 PCI card.
  	  A sample userspace application using this driver is available
  	  (among other MF624 related information and software components)
  	  for download in a git repository:
  
  	    git clone git://rtime.felk.cvut.cz/mf6xx.git
  
  	  If you compile this as a module, it will be called uio_mf624.

  config UIO_HV_GENERIC
  	tristate "Generic driver for Hyper-V VMBus"
  	depends on HYPERV
  	help
  	  Generic driver that you can bind, dynamically, to any
  	  Hyper-V VMBus device. It is useful to provide direct access
  	  to network and storage devices from userspace.
  
  	  If you compile this as a module, it will be called uio_hv_generic.

  endif