# SPDX-License-Identifier: GPL-2.0

  if MMU
  
  config ARCH_MAY_HAVE_PC_FDC
  	bool
  	depends on BROKEN && (Q40 || SUN3X)
  	default y
  
  menu "Platform devices"
  
  config HEARTBEAT

  	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
  	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300

  	help
  	  Use the power-on LED on your machine as a load meter.  The exact
  	  behavior is platform-dependent, but normally the flash frequency is
  	  a hyperbolic function of the 5-minute load average.
  
  # We have a dedicated heartbeat LED. :-)
  config PROC_HARDWARE
  	bool "/proc/hardware support"
  	help
  	  Say Y here to support the /proc/hardware file, which gives you
  	  access to information about the machine you're running on,
  	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
  	  and memory size.

  config NATFEAT
  	bool "ARAnyM emulator support"
  	depends on ATARI
  	help
  	  This option enables support for ARAnyM native features, such as
  	  access to a disk image as /dev/hda.
  
  config NFBLOCK
  	tristate "NatFeat block device support"
  	depends on BLOCK && NATFEAT
  	help
  	  Say Y to include support for the ARAnyM NatFeat block device
  	  which allows direct access to the hard drives without using
  	  the hardware emulation.
  
  config NFCON
  	tristate "NatFeat console driver"

  	depends on TTY && NATFEAT

  	help
  	  Say Y to include support for the ARAnyM NatFeat console driver
  	  which allows the console output to be redirected to the stderr
  	  output of ARAnyM.
  
  config NFETH
  	tristate "NatFeat Ethernet support"
  	depends on ETHERNET && NATFEAT
  	help
  	  Say Y to include support for the ARAnyM NatFeat network device
  	  which will emulate a regular ethernet device while presenting an
  	  ethertap device to the host system.

  config ATARI_ETHERNAT
  	bool "Atari EtherNAT Ethernet support"
  	depends on ATARI

  	help

  	  Say Y to include support for the EtherNAT network adapter for the
  	  CT/60 extension port.
  
  	  To compile the actual ethernet driver, choose Y or M for the SMC91X
  	  option in the network device section; the module will be called smc91x.

  config ATARI_ETHERNEC
  	bool "Atari EtherNEC Ethernet support"
  	depends on ATARI_ROM_ISA

  	help

  	  Say Y to include support for the EtherNEC network adapter for the
  	  ROM port. The driver works by polling instead of interrupts, so it
  	  is quite slow.

  	  This driver also supports the ethernet part of the NetUSBee ROM

  	  port combined Ethernet/USB adapter.
  
  	  To compile the actual ethernet driver, choose Y or M in for the NE2000
  	  option in the network device section; the module will be called ne.

  endmenu
  
  menu "Character devices"

  config ATARI_DSP56K

  	tristate "Atari DSP56k support"
  	depends on ATARI

  	help
  	  If you want to be able to use the DSP56001 in Falcons, say Y. This
  	  driver is still experimental, and if you don't know what it is, or
  	  if you don't have this processor, just say N.
  
  	  To compile this driver as a module, choose M here.
  
  config AMIGA_BUILTIN_SERIAL
  	tristate "Amiga builtin serial support"

  	depends on AMIGA && TTY

  	help
  	  If you want to use your Amiga's built-in serial port in Linux,
  	  answer Y.
  
  	  To compile this driver as a module, choose M here.

  config HPDCA
  	tristate "HP DCA serial support"
  	depends on DIO && SERIAL_8250
  	help
  	  If you want to use the internal "DCA" serial ports on an HP300
  	  machine, say Y here.
  
  config HPAPCI
  	tristate "HP APCI serial support"

  	depends on HP300 && SERIAL_8250

  	help
  	  If you want to use the internal "APCI" serial ports on an HP400
  	  machine, say Y here.

  config SERIAL_CONSOLE
  	bool "Support for serial port console"

  	depends on AMIGA_BUILTIN_SERIAL=y

  	help

  	  If you say Y here, it will be possible to use a serial port as the
  	  system console (the system console is the device which receives all
  	  kernel messages and warnings and which allows logins in single user
  	  mode). This could be useful if some terminal or printer is connected
  	  to that serial port.
  
  	  Even if you say Y here, the currently visible virtual console
  	  (/dev/tty0) will still be used as the system console by default, but
  	  you can alter that using a kernel command line option such as
  	  "console=ttyS1". (Try "man bootparam" or see the documentation of

  	  your boot loader about how to pass options to the kernel at boot
  	  time.)

  	  If you don't have a graphical console and you say Y here, the

  	  kernel will automatically use the first serial line, /dev/ttyS0, as
  	  system console.
  
  	  If unsure, say N.
  
  endmenu
  
  endif