Blame view
drivers/ata/pata_cs5535.c
6.21 KB
669a5db41 [libata] Add a bu... |
1 2 3 |
/* * pata-cs5535.c - CS5535 PATA for new ATA layer * (C) 2005-2006 Red Hat Inc |
ab7716300 ata: Switch all m... |
4 |
* Alan Cox <alan@lxorguk.ukuu.org.uk> |
669a5db41 [libata] Add a bu... |
5 6 |
* * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and |
d914e5b70 pata_cs5535: fix ... |
7 |
* made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de> |
669a5db41 [libata] Add a bu... |
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 |
* and Alexander Kiausch <alex.kiausch@t-online.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Loosely based on the piix & svwks drivers. * * Documentation: * Available from AMD web site. * TODO |
3a4fa0a25 Fix misspellings ... |
28 |
* Review errata to see if serializing is necessary |
669a5db41 [libata] Add a bu... |
29 30 31 32 33 |
*/ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> |
669a5db41 [libata] Add a bu... |
34 35 36 37 38 |
#include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #include <asm/msr.h> |
e9f7cd51c pata_cs5535: fix ... |
39 |
#define DRV_NAME "pata_cs5535" |
8bc3fc470 libata: bump vers... |
40 |
#define DRV_VERSION "0.2.12" |
669a5db41 [libata] Add a bu... |
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 |
/* * The Geode (Aka Athlon GX now) uses an internal MSR based * bus system for control. Demented but there you go. */ #define MSR_ATAC_BASE 0x51300000 #define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) #define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) #define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) #define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) #define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) #define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) #define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) #define ATAC_RESET (MSR_ATAC_BASE+0x10) #define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) #define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) #define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) #define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) #define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) #define ATAC_BM0_CMD_PRIM 0x00 #define ATAC_BM0_STS_PRIM 0x02 #define ATAC_BM0_PRD 0x04 #define CS5535_CABLE_DETECT 0x48 |
669a5db41 [libata] Add a bu... |
67 |
/** |
eb4a2c7f0 pata: cable methods |
68 |
* cs5535_cable_detect - detect cable type |
669a5db41 [libata] Add a bu... |
69 70 71 72 73 |
* @ap: Port to detect on * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. */ |
eb4a2c7f0 pata: cable methods |
74 |
static int cs5535_cable_detect(struct ata_port *ap) |
669a5db41 [libata] Add a bu... |
75 76 77 78 79 80 |
{ u8 cable; struct pci_dev *pdev = to_pci_dev(ap->host->dev); pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable); if (cable & 1) |
eb4a2c7f0 pata: cable methods |
81 |
return ATA_CBL_PATA80; |
669a5db41 [libata] Add a bu... |
82 |
else |
eb4a2c7f0 pata: cable methods |
83 |
return ATA_CBL_PATA40; |
669a5db41 [libata] Add a bu... |
84 85 86 87 88 89 90 91 92 93 94 95 96 |
} /** * cs5535_set_piomode - PIO setup * @ap: ATA interface * @adev: device on the interface * * Set our PIO requirements. The CS5535 is pretty clean about all this */ static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const u16 pio_timings[5] = { |
8ebf47386 pata_cs5535: use ... |
97 |
0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 |
669a5db41 [libata] Add a bu... |
98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 |
}; static const u16 pio_cmd_timings[5] = { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 }; u32 reg, dummy; struct ata_device *pair = ata_dev_pair(adev); int mode = adev->pio_mode - XFER_PIO_0; int cmdmode = mode; /* Command timing has to be for the lowest of the pair of devices */ if (pair) { int pairmode = pair->pio_mode - XFER_PIO_0; cmdmode = min(mode, pairmode); /* Write the other drive timing register if it changed */ if (cmdmode < pairmode) wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno, pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0); } /* Write the drive timing register */ wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno, pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0); /* Set the PIO "format 1" bit in the DMA timing register */ rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0); } /** * cs5535_set_dmamode - DMA timing setup * @ap: ATA interface * @adev: Device being configured * */ static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev) { static const u32 udma_timings[5] = { 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 }; static const u32 mwdma_timings[3] = { 0x7F0FFFF3, 0x7F035352, 0x7F024241 }; u32 reg, dummy; int mode = adev->dma_mode; rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); reg &= 0x80000000UL; if (mode >= XFER_UDMA_0) reg |= udma_timings[mode - XFER_UDMA_0]; else reg |= mwdma_timings[mode - XFER_MW_DMA_0]; wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0); } static struct scsi_host_template cs5535_sht = { |
68d1d07b5 libata: implement... |
154 |
ATA_BMDMA_SHT(DRV_NAME), |
669a5db41 [libata] Add a bu... |
155 156 157 |
}; static struct ata_port_operations cs5535_port_ops = { |
029cfd6b7 libata: implement... |
158 159 |
.inherits = &ata_bmdma_port_ops, .cable_detect = cs5535_cable_detect, |
669a5db41 [libata] Add a bu... |
160 161 |
.set_piomode = cs5535_set_piomode, .set_dmamode = cs5535_set_dmamode, |
669a5db41 [libata] Add a bu... |
162 163 164 165 166 167 168 169 170 171 172 173 174 175 |
}; /** * cs5535_init_one - Initialise a CS5530 * @dev: PCI device * @id: Entry in match table * * Install a driver for the newly found CS5530 companion chip. Most of * this is just housekeeping. We have to set the chip up correctly and * turn off various bits of emulation magic. */ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) { |
1626aeb88 libata: clean up ... |
176 |
static const struct ata_port_info info = { |
1d2808fd3 [libata] PATA dri... |
177 |
.flags = ATA_FLAG_SLAVE_POSS, |
14bdef982 [libata] convert ... |
178 179 |
.pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, |
bf6263a85 [libata] Use ATA_... |
180 |
.udma_mask = ATA_UDMA4, |
669a5db41 [libata] Add a bu... |
181 182 |
.port_ops = &cs5535_port_ops }; |
1626aeb88 libata: clean up ... |
183 |
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; |
669a5db41 [libata] Add a bu... |
184 |
|
1c5afdf7a libata-sff: separ... |
185 |
return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0); |
669a5db41 [libata] Add a bu... |
186 |
} |
2d2744fc8 [libata] PCI ID t... |
187 |
static const struct pci_device_id cs5535[] = { |
02cb009bb pata_cs5535: add ... |
188 189 |
{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), }, |
2d2744fc8 [libata] PCI ID t... |
190 191 |
{ }, |
669a5db41 [libata] Add a bu... |
192 193 194 195 196 197 |
}; static struct pci_driver cs5535_pci_driver = { .name = DRV_NAME, .id_table = cs5535, .probe = cs5535_init_one, |
3ac551a6a [libata] pata_cs5... |
198 |
.remove = ata_pci_remove_one, |
58eb8cd56 ata: use CONFIG_P... |
199 |
#ifdef CONFIG_PM_SLEEP |
30ced0f0d [PATCH] PATA liba... |
200 201 |
.suspend = ata_pci_device_suspend, .resume = ata_pci_device_resume, |
438ac6d5e libata: add missi... |
202 |
#endif |
669a5db41 [libata] Add a bu... |
203 |
}; |
2fc75da0c ata: use module_p... |
204 |
module_pci_driver(cs5535_pci_driver); |
669a5db41 [libata] Add a bu... |
205 |
|
669a5db41 [libata] Add a bu... |
206 |
MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch"); |
e9f7cd51c pata_cs5535: fix ... |
207 |
MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535"); |
669a5db41 [libata] Add a bu... |
208 209 210 |
MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, cs5535); MODULE_VERSION(DRV_VERSION); |