Blame view
drivers/hwmon/ads7828.c
7.56 KB
5812f9283 hwmon: Add suppor... |
1 2 3 4 5 |
/* ads7828.c - lm_sensors driver for ads7828 12-bit 8-channel ADC (C) 2007 EADS Astrium This driver is based on the lm75 and other lm_sensors/hwmon drivers |
5d84291da hwmon: (ads7828) ... |
6 |
Written by Steve Hardy <shardy@redhat.com> |
5812f9283 hwmon: Add suppor... |
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 |
Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> /* The ADS7828 registers */ #define ADS7828_NCH 8 /* 8 channels of 12-bit A-D supported */ #define ADS7828_CMD_SD_SE 0x80 /* Single ended inputs */ #define ADS7828_CMD_SD_DIFF 0x00 /* Differential inputs */ #define ADS7828_CMD_PD0 0x0 /* Power Down between A-D conversions */ #define ADS7828_CMD_PD1 0x04 /* Internal ref OFF && A-D ON */ #define ADS7828_CMD_PD2 0x08 /* Internal ref ON && A-D OFF */ #define ADS7828_CMD_PD3 0x0C /* Internal ref ON && A-D ON */ #define ADS7828_INT_VREF_MV 2500 /* Internal vref is 2.5V, 2500mV */ /* Addresses to scan */ |
25e9c86d5 hwmon: normal_i2c... |
46 |
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, |
5812f9283 hwmon: Add suppor... |
47 |
I2C_CLIENT_END }; |
1f86df49d i2c: Drop I2C_CLI... |
48 |
/* Module parameters */ |
90ab5ee94 module_param: mak... |
49 50 |
static bool se_input = 1; /* Default is SE, 0 == diff */ static bool int_vref = 1; /* Default is internal ref ON */ |
5812f9283 hwmon: Add suppor... |
51 52 53 54 55 56 57 58 59 60 61 |
static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */ module_param(se_input, bool, S_IRUGO); module_param(int_vref, bool, S_IRUGO); module_param(vref_mv, int, S_IRUGO); /* Global Variables */ static u8 ads7828_cmd_byte; /* cmd byte without channel bits */ static unsigned int ads7828_lsb_resol; /* resolution of the ADC sample lsb */ /* Each client has this additional data */ struct ads7828_data { |
5812f9283 hwmon: Add suppor... |
62 63 64 65 66 67 68 69 |
struct device *hwmon_dev; struct mutex update_lock; /* mutex protect updates */ char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ u16 adc_input[ADS7828_NCH]; /* ADS7828_NCH 12-bit samples */ }; /* Function declaration - necessary due to function dependencies */ |
310ec7921 i2c: Drop the kin... |
70 |
static int ads7828_detect(struct i2c_client *client, |
7347cb388 hwmon: (ads7828) ... |
71 72 73 |
struct i2c_board_info *info); static int ads7828_probe(struct i2c_client *client, const struct i2c_device_id *id); |
5812f9283 hwmon: Add suppor... |
74 |
|
5812f9283 hwmon: Add suppor... |
75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 |
static inline u8 channel_cmd_byte(int ch) { /* cmd byte C2,C1,C0 - see datasheet */ u8 cmd = (((ch>>1) | (ch&0x01)<<2)<<4); cmd |= ads7828_cmd_byte; return cmd; } /* Update data for the device (all 8 channels) */ static struct ads7828_data *ads7828_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct ads7828_data *data = i2c_get_clientdata(client); mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { unsigned int ch; dev_dbg(&client->dev, "Starting ads7828 update "); for (ch = 0; ch < ADS7828_NCH; ch++) { u8 cmd = channel_cmd_byte(ch); |
90f4102ce hwmon: Use i2c_sm... |
99 100 |
data->adc_input[ch] = i2c_smbus_read_word_swapped(client, cmd); |
5812f9283 hwmon: Add suppor... |
101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 |
} data->last_updated = jiffies; data->valid = 1; } mutex_unlock(&data->update_lock); return data; } /* sysfs callback function */ static ssize_t show_in(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ads7828_data *data = ads7828_update_device(dev); /* Print value (in mV as specified in sysfs-interface documentation) */ return sprintf(buf, "%d ", (data->adc_input[attr->index] * ads7828_lsb_resol)/1000); } #define in_reg(offset)\ static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in,\ NULL, offset) in_reg(0); in_reg(1); in_reg(2); in_reg(3); in_reg(4); in_reg(5); in_reg(6); in_reg(7); static struct attribute *ads7828_attributes[] = { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, &sensor_dev_attr_in2_input.dev_attr.attr, &sensor_dev_attr_in3_input.dev_attr.attr, &sensor_dev_attr_in4_input.dev_attr.attr, &sensor_dev_attr_in5_input.dev_attr.attr, &sensor_dev_attr_in6_input.dev_attr.attr, &sensor_dev_attr_in7_input.dev_attr.attr, NULL }; static const struct attribute_group ads7828_group = { .attrs = ads7828_attributes, }; |
7347cb388 hwmon: (ads7828) ... |
151 |
static int ads7828_remove(struct i2c_client *client) |
5812f9283 hwmon: Add suppor... |
152 153 154 155 |
{ struct ads7828_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &ads7828_group); |
5812f9283 hwmon: Add suppor... |
156 157 158 |
kfree(i2c_get_clientdata(client)); return 0; } |
7347cb388 hwmon: (ads7828) ... |
159 |
static const struct i2c_device_id ads7828_id[] = { |
1f86df49d i2c: Drop I2C_CLI... |
160 |
{ "ads7828", 0 }, |
7347cb388 hwmon: (ads7828) ... |
161 162 163 |
{ } }; MODULE_DEVICE_TABLE(i2c, ads7828_id); |
5812f9283 hwmon: Add suppor... |
164 165 |
/* This is the driver that will be inserted */ static struct i2c_driver ads7828_driver = { |
7347cb388 hwmon: (ads7828) ... |
166 |
.class = I2C_CLASS_HWMON, |
5812f9283 hwmon: Add suppor... |
167 168 169 |
.driver = { .name = "ads7828", }, |
7347cb388 hwmon: (ads7828) ... |
170 171 172 173 |
.probe = ads7828_probe, .remove = ads7828_remove, .id_table = ads7828_id, .detect = ads7828_detect, |
c3813d6af i2c: Get rid of s... |
174 |
.address_list = normal_i2c, |
5812f9283 hwmon: Add suppor... |
175 |
}; |
7347cb388 hwmon: (ads7828) ... |
176 |
/* Return 0 if detection is successful, -ENODEV otherwise */ |
310ec7921 i2c: Drop the kin... |
177 |
static int ads7828_detect(struct i2c_client *client, |
7347cb388 hwmon: (ads7828) ... |
178 |
struct i2c_board_info *info) |
5812f9283 hwmon: Add suppor... |
179 |
{ |
7347cb388 hwmon: (ads7828) ... |
180 |
struct i2c_adapter *adapter = client->adapter; |
52df6440a hwmon: Clean up d... |
181 |
int ch; |
5812f9283 hwmon: Add suppor... |
182 183 184 |
/* Check we have a valid client */ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) |
7347cb388 hwmon: (ads7828) ... |
185 |
return -ENODEV; |
5812f9283 hwmon: Add suppor... |
186 187 188 189 190 191 192 |
/* Now, we do the remaining detection. There is no identification dedicated register so attempt to sanity check using knowledge of the chip - Read from the 8 channel addresses - Check the top 4 bits of each result are not set (12 data bits) */ |
52df6440a hwmon: Clean up d... |
193 194 195 |
for (ch = 0; ch < ADS7828_NCH; ch++) { u16 in_data; u8 cmd = channel_cmd_byte(ch); |
90f4102ce hwmon: Use i2c_sm... |
196 |
in_data = i2c_smbus_read_word_swapped(client, cmd); |
52df6440a hwmon: Clean up d... |
197 198 199 200 201 |
if (in_data & 0xF000) { pr_debug("%s : Doesn't look like an ads7828 device ", __func__); return -ENODEV; |
5812f9283 hwmon: Add suppor... |
202 203 |
} } |
52df6440a hwmon: Clean up d... |
204 |
|
7347cb388 hwmon: (ads7828) ... |
205 |
strlcpy(info->type, "ads7828", I2C_NAME_SIZE); |
5812f9283 hwmon: Add suppor... |
206 |
|
7347cb388 hwmon: (ads7828) ... |
207 208 |
return 0; } |
5812f9283 hwmon: Add suppor... |
209 |
|
7347cb388 hwmon: (ads7828) ... |
210 211 212 213 214 |
static int ads7828_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct ads7828_data *data; int err; |
5812f9283 hwmon: Add suppor... |
215 |
|
7347cb388 hwmon: (ads7828) ... |
216 217 218 219 220 |
data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL); if (!data) { err = -ENOMEM; goto exit; } |
5812f9283 hwmon: Add suppor... |
221 |
|
7347cb388 hwmon: (ads7828) ... |
222 |
i2c_set_clientdata(client, data); |
5812f9283 hwmon: Add suppor... |
223 |
mutex_init(&data->update_lock); |
5812f9283 hwmon: Add suppor... |
224 225 226 |
/* Register sysfs hooks */ err = sysfs_create_group(&client->dev.kobj, &ads7828_group); if (err) |
7347cb388 hwmon: (ads7828) ... |
227 |
goto exit_free; |
5812f9283 hwmon: Add suppor... |
228 229 230 231 232 233 234 235 236 237 238 |
data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto exit_remove; } return 0; exit_remove: sysfs_remove_group(&client->dev.kobj, &ads7828_group); |
5812f9283 hwmon: Add suppor... |
239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 |
exit_free: kfree(data); exit: return err; } static int __init sensors_ads7828_init(void) { /* Initialize the command byte according to module parameters */ ads7828_cmd_byte = se_input ? ADS7828_CMD_SD_SE : ADS7828_CMD_SD_DIFF; ads7828_cmd_byte |= int_vref ? ADS7828_CMD_PD3 : ADS7828_CMD_PD1; /* Calculate the LSB resolution */ ads7828_lsb_resol = (vref_mv*1000)/4096; return i2c_add_driver(&ads7828_driver); } static void __exit sensors_ads7828_exit(void) { i2c_del_driver(&ads7828_driver); } |
5d84291da hwmon: (ads7828) ... |
263 |
MODULE_AUTHOR("Steve Hardy <shardy@redhat.com>"); |
5812f9283 hwmon: Add suppor... |
264 265 266 267 268 |
MODULE_DESCRIPTION("ADS7828 driver"); MODULE_LICENSE("GPL"); module_init(sensors_ads7828_init); module_exit(sensors_ads7828_exit); |