/*
   *  linux/kernel/sys.c
   *
   *  Copyright (C) 1991, 1992  Linus Torvalds
   */

  #include <linux/module.h>
  #include <linux/mm.h>
  #include <linux/utsname.h>
  #include <linux/mman.h>

  #include <linux/notifier.h>
  #include <linux/reboot.h>
  #include <linux/prctl.h>

  #include <linux/highuid.h>
  #include <linux/fs.h>

  #include <linux/perf_event.h>

  #include <linux/resource.h>

  #include <linux/kernel.h>
  #include <linux/kexec.h>

  #include <linux/workqueue.h>

  #include <linux/capability.h>

  #include <linux/device.h>
  #include <linux/key.h>
  #include <linux/times.h>
  #include <linux/posix-timers.h>
  #include <linux/security.h>
  #include <linux/dcookies.h>
  #include <linux/suspend.h>
  #include <linux/tty.h>

  #include <linux/signal.h>

  #include <linux/cn_proc.h>

  #include <linux/getcpu.h>

  #include <linux/task_io_accounting_ops.h>

  #include <linux/seccomp.h>

  #include <linux/cpu.h>

  #include <linux/personality.h>

  #include <linux/ptrace.h>

  #include <linux/fs_struct.h>

  #include <linux/gfp.h>

  
  #include <linux/compat.h>
  #include <linux/syscalls.h>

  #include <linux/kprobes.h>

  #include <linux/user_namespace.h>

  
  #include <asm/uaccess.h>
  #include <asm/io.h>
  #include <asm/unistd.h>
  
  #ifndef SET_UNALIGN_CTL
  # define SET_UNALIGN_CTL(a,b)	(-EINVAL)
  #endif
  #ifndef GET_UNALIGN_CTL
  # define GET_UNALIGN_CTL(a,b)	(-EINVAL)
  #endif
  #ifndef SET_FPEMU_CTL
  # define SET_FPEMU_CTL(a,b)	(-EINVAL)
  #endif
  #ifndef GET_FPEMU_CTL
  # define GET_FPEMU_CTL(a,b)	(-EINVAL)
  #endif
  #ifndef SET_FPEXC_CTL
  # define SET_FPEXC_CTL(a,b)	(-EINVAL)
  #endif
  #ifndef GET_FPEXC_CTL
  # define GET_FPEXC_CTL(a,b)	(-EINVAL)
  #endif

  #ifndef GET_ENDIAN
  # define GET_ENDIAN(a,b)	(-EINVAL)
  #endif
  #ifndef SET_ENDIAN
  # define SET_ENDIAN(a,b)	(-EINVAL)
  #endif

  #ifndef GET_TSC_CTL
  # define GET_TSC_CTL(a)		(-EINVAL)
  #endif
  #ifndef SET_TSC_CTL
  # define SET_TSC_CTL(a)		(-EINVAL)
  #endif

  
  /*
   * this is where the system-wide overflow UID and GID are defined, for
   * architectures that now have 32-bit UID/GID but didn't in the past
   */
  
  int overflowuid = DEFAULT_OVERFLOWUID;
  int overflowgid = DEFAULT_OVERFLOWGID;
  
  #ifdef CONFIG_UID16
  EXPORT_SYMBOL(overflowuid);
  EXPORT_SYMBOL(overflowgid);
  #endif
  
  /*
   * the same as above, but for filesystems which can only store a 16-bit
   * UID and GID. as such, this is needed on all architectures
   */
  
  int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
  int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;
  
  EXPORT_SYMBOL(fs_overflowuid);
  EXPORT_SYMBOL(fs_overflowgid);
  
  /*
   * this indicates whether you can reboot with ctrl-alt-del: the default is yes
   */
  
  int C_A_D = 1;

  struct pid *cad_pid;
  EXPORT_SYMBOL(cad_pid);

  
  /*

   * If set, this is used for preparing the system to power off.
   */
  
  void (*pm_power_off_prepare)(void);

  /*
   * set the priority of a task
   * - the caller must hold the RCU read lock
   */

  static int set_one_prio(struct task_struct *p, int niceval, int error)
  {

  	const struct cred *cred = current_cred(), *pcred = __task_cred(p);

  	int no_nice;

  	if (pcred->uid  != cred->euid &&
  	    pcred->euid != cred->euid && !capable(CAP_SYS_NICE)) {

  		error = -EPERM;
  		goto out;
  	}

  	if (niceval < task_nice(p) && !can_nice(p, niceval)) {

  		error = -EACCES;
  		goto out;
  	}
  	no_nice = security_task_setnice(p, niceval);
  	if (no_nice) {
  		error = no_nice;
  		goto out;
  	}
  	if (error == -ESRCH)
  		error = 0;
  	set_user_nice(p, niceval);
  out:
  	return error;
  }

  SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval)

  {
  	struct task_struct *g, *p;
  	struct user_struct *user;

  	const struct cred *cred = current_cred();

  	int error = -EINVAL;

  	struct pid *pgrp;

  	if (which > PRIO_USER || which < PRIO_PROCESS)

  		goto out;
  
  	/* normalize: avoid signed division (rounding problems) */
  	error = -ESRCH;
  	if (niceval < -20)
  		niceval = -20;
  	if (niceval > 19)
  		niceval = 19;

  	rcu_read_lock();

  	read_lock(&tasklist_lock);
  	switch (which) {
  		case PRIO_PROCESS:

  			if (who)

  				p = find_task_by_vpid(who);

  			else
  				p = current;

  			if (p)
  				error = set_one_prio(p, niceval, error);
  			break;
  		case PRIO_PGRP:

  			if (who)

  				pgrp = find_vpid(who);

  			else
  				pgrp = task_pgrp(current);

  			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {

  				error = set_one_prio(p, niceval, error);

  			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);

  			break;
  		case PRIO_USER:

  			user = (struct user_struct *) cred->user;

  			if (!who)

  				who = cred->uid;
  			else if ((who != cred->uid) &&
  				 !(user = find_user(who)))
  				goto out_unlock;	/* No processes for this user */

  			do_each_thread(g, p) {

  				if (__task_cred(p)->uid == who)

  					error = set_one_prio(p, niceval, error);

  			} while_each_thread(g, p);

  			if (who != cred->uid)

  				free_uid(user);		/* For find_user() */
  			break;
  	}
  out_unlock:
  	read_unlock(&tasklist_lock);

  	rcu_read_unlock();

  out:
  	return error;
  }
  
  /*
   * Ugh. To avoid negative return values, "getpriority()" will
   * not return the normal nice-value, but a negated value that
   * has been offset by 20 (ie it returns 40..1 instead of -20..19)
   * to stay compatible.
   */

  SYSCALL_DEFINE2(getpriority, int, which, int, who)

  {
  	struct task_struct *g, *p;
  	struct user_struct *user;

  	const struct cred *cred = current_cred();

  	long niceval, retval = -ESRCH;

  	struct pid *pgrp;

  	if (which > PRIO_USER || which < PRIO_PROCESS)

  		return -EINVAL;

  	rcu_read_lock();

  	read_lock(&tasklist_lock);
  	switch (which) {
  		case PRIO_PROCESS:

  			if (who)

  				p = find_task_by_vpid(who);

  			else
  				p = current;

  			if (p) {
  				niceval = 20 - task_nice(p);
  				if (niceval > retval)
  					retval = niceval;
  			}
  			break;
  		case PRIO_PGRP:

  			if (who)

  				pgrp = find_vpid(who);

  			else
  				pgrp = task_pgrp(current);

  			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {

  				niceval = 20 - task_nice(p);
  				if (niceval > retval)
  					retval = niceval;

  			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);

  			break;
  		case PRIO_USER:

  			user = (struct user_struct *) cred->user;

  			if (!who)

  				who = cred->uid;
  			else if ((who != cred->uid) &&
  				 !(user = find_user(who)))
  				goto out_unlock;	/* No processes for this user */

  			do_each_thread(g, p) {

  				if (__task_cred(p)->uid == who) {

  					niceval = 20 - task_nice(p);
  					if (niceval > retval)
  						retval = niceval;
  				}

  			} while_each_thread(g, p);

  			if (who != cred->uid)

  				free_uid(user);		/* for find_user() */
  			break;
  	}
  out_unlock:
  	read_unlock(&tasklist_lock);

  	rcu_read_unlock();

  
  	return retval;
  }

  /**
   *	emergency_restart - reboot the system
   *
   *	Without shutting down any hardware or taking any locks
   *	reboot the system.  This is called when we know we are in
   *	trouble so this is our best effort to reboot.  This is
   *	safe to call in interrupt context.
   */

  void emergency_restart(void)
  {
  	machine_emergency_restart();
  }
  EXPORT_SYMBOL_GPL(emergency_restart);

  void kernel_restart_prepare(char *cmd)

  {

  	blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);

  	system_state = SYSTEM_RESTART;

  	device_shutdown();

  	sysdev_shutdown();

  }

  
  /**
   *	kernel_restart - reboot the system
   *	@cmd: pointer to buffer containing command to execute for restart

   *		or %NULL

   *
   *	Shutdown everything and perform a clean reboot.
   *	This is not safe to call in interrupt context.
   */

  void kernel_restart(char *cmd)
  {
  	kernel_restart_prepare(cmd);

  	if (!cmd)

  		printk(KERN_EMERG "Restarting system.
  ");

  	else

  		printk(KERN_EMERG "Restarting system with command '%s'.
  ", cmd);

  	machine_restart(cmd);
  }
  EXPORT_SYMBOL_GPL(kernel_restart);

  static void kernel_shutdown_prepare(enum system_states state)

  {

  	blocking_notifier_call_chain(&reboot_notifier_list,

  		(state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
  	system_state = state;
  	device_shutdown();
  }

  /**
   *	kernel_halt - halt the system
   *
   *	Shutdown everything and perform a clean system halt.
   */

  void kernel_halt(void)
  {

  	kernel_shutdown_prepare(SYSTEM_HALT);

  	sysdev_shutdown();

  	printk(KERN_EMERG "System halted.
  ");
  	machine_halt();
  }

  EXPORT_SYMBOL_GPL(kernel_halt);

  /**
   *	kernel_power_off - power_off the system
   *
   *	Shutdown everything and perform a clean system power_off.
   */

  void kernel_power_off(void)
  {

  	kernel_shutdown_prepare(SYSTEM_POWER_OFF);

  	if (pm_power_off_prepare)
  		pm_power_off_prepare();

  	disable_nonboot_cpus();

  	sysdev_shutdown();

  	printk(KERN_EMERG "Power down.
  ");
  	machine_power_off();
  }
  EXPORT_SYMBOL_GPL(kernel_power_off);

  
  static DEFINE_MUTEX(reboot_mutex);

  /*
   * Reboot system call: for obvious reasons only root may call it,
   * and even root needs to set up some magic numbers in the registers
   * so that some mistake won't make this reboot the whole machine.
   * You can also set the meaning of the ctrl-alt-del-key here.
   *
   * reboot doesn't sync: do that yourself before calling this.
   */

  SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
  		void __user *, arg)

  {
  	char buffer[256];

  	int ret = 0;

  
  	/* We only trust the superuser with rebooting the system. */
  	if (!capable(CAP_SYS_BOOT))
  		return -EPERM;
  
  	/* For safety, we require "magic" arguments. */
  	if (magic1 != LINUX_REBOOT_MAGIC1 ||
  	    (magic2 != LINUX_REBOOT_MAGIC2 &&
  	                magic2 != LINUX_REBOOT_MAGIC2A &&
  			magic2 != LINUX_REBOOT_MAGIC2B &&
  	                magic2 != LINUX_REBOOT_MAGIC2C))
  		return -EINVAL;

  	/* Instead of trying to make the power_off code look like
  	 * halt when pm_power_off is not set do it the easy way.
  	 */
  	if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
  		cmd = LINUX_REBOOT_CMD_HALT;

  	mutex_lock(&reboot_mutex);

  	switch (cmd) {
  	case LINUX_REBOOT_CMD_RESTART:

  		kernel_restart(NULL);

  		break;
  
  	case LINUX_REBOOT_CMD_CAD_ON:
  		C_A_D = 1;
  		break;
  
  	case LINUX_REBOOT_CMD_CAD_OFF:
  		C_A_D = 0;
  		break;
  
  	case LINUX_REBOOT_CMD_HALT:

  		kernel_halt();

  		do_exit(0);

  		panic("cannot halt");

  
  	case LINUX_REBOOT_CMD_POWER_OFF:

  		kernel_power_off();

  		do_exit(0);
  		break;
  
  	case LINUX_REBOOT_CMD_RESTART2:
  		if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {

  			ret = -EFAULT;
  			break;

  		}
  		buffer[sizeof(buffer) - 1] = '\0';

  		kernel_restart(buffer);

  		break;

  #ifdef CONFIG_KEXEC

  	case LINUX_REBOOT_CMD_KEXEC:

  		ret = kernel_kexec();
  		break;

  #endif

  #ifdef CONFIG_HIBERNATION

  	case LINUX_REBOOT_CMD_SW_SUSPEND:

  		ret = hibernate();
  		break;

  #endif
  
  	default:

  		ret = -EINVAL;
  		break;

  	}

  	mutex_unlock(&reboot_mutex);

  	return ret;

  }

  static void deferred_cad(struct work_struct *dummy)

  {

  	kernel_restart(NULL);

  }
  
  /*
   * This function gets called by ctrl-alt-del - ie the keyboard interrupt.
   * As it's called within an interrupt, it may NOT sync: the only choice
   * is whether to reboot at once, or just ignore the ctrl-alt-del.
   */
  void ctrl_alt_del(void)
  {

  	static DECLARE_WORK(cad_work, deferred_cad);

  
  	if (C_A_D)
  		schedule_work(&cad_work);
  	else

  		kill_cad_pid(SIGINT, 1);

  }
  	

  /*
   * Unprivileged users may change the real gid to the effective gid
   * or vice versa.  (BSD-style)
   *
   * If you set the real gid at all, or set the effective gid to a value not
   * equal to the real gid, then the saved gid is set to the new effective gid.
   *
   * This makes it possible for a setgid program to completely drop its
   * privileges, which is often a useful assertion to make when you are doing
   * a security audit over a program.
   *
   * The general idea is that a program which uses just setregid() will be
   * 100% compatible with BSD.  A program which uses just setgid() will be
   * 100% compatible with POSIX with saved IDs. 
   *
   * SMP: There are not races, the GIDs are checked only by filesystem
   *      operations (as far as semantic preservation is concerned).
   */

  SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid)

  {

  	const struct cred *old;
  	struct cred *new;

  	int retval;

  	new = prepare_creds();
  	if (!new)
  		return -ENOMEM;
  	old = current_cred();

  	retval = -EPERM;

  	if (rgid != (gid_t) -1) {

  		if (old->gid == rgid ||
  		    old->egid == rgid ||

  		    capable(CAP_SETGID))

  			new->gid = rgid;

  		else

  			goto error;

  	}
  	if (egid != (gid_t) -1) {

  		if (old->gid == egid ||
  		    old->egid == egid ||
  		    old->sgid == egid ||

  		    capable(CAP_SETGID))

  			new->egid = egid;

  		else

  			goto error;

  	}

  	if (rgid != (gid_t) -1 ||

  	    (egid != (gid_t) -1 && egid != old->gid))
  		new->sgid = new->egid;
  	new->fsgid = new->egid;
  
  	return commit_creds(new);
  
  error:
  	abort_creds(new);
  	return retval;

  }
  
  /*
   * setgid() is implemented like SysV w/ SAVED_IDS 
   *
   * SMP: Same implicit races as above.
   */

  SYSCALL_DEFINE1(setgid, gid_t, gid)

  {

  	const struct cred *old;
  	struct cred *new;

  	int retval;

  	new = prepare_creds();
  	if (!new)
  		return -ENOMEM;
  	old = current_cred();

  	retval = -EPERM;
  	if (capable(CAP_SETGID))
  		new->gid = new->egid = new->sgid = new->fsgid = gid;
  	else if (gid == old->gid || gid == old->sgid)
  		new->egid = new->fsgid = gid;

  	else

  		goto error;

  	return commit_creds(new);
  
  error:
  	abort_creds(new);
  	return retval;

  }

  /*
   * change the user struct in a credentials set to match the new UID
   */
  static int set_user(struct cred *new)

  {
  	struct user_struct *new_user;

  	new_user = alloc_uid(current_user_ns(), new->uid);

  	if (!new_user)
  		return -EAGAIN;

  	if (atomic_read(&new_user->processes) >= rlimit(RLIMIT_NPROC) &&

  			new_user != INIT_USER) {

  		free_uid(new_user);
  		return -EAGAIN;
  	}

  	free_uid(new->user);
  	new->user = new_user;

  	return 0;
  }
  
  /*
   * Unprivileged users may change the real uid to the effective uid
   * or vice versa.  (BSD-style)
   *
   * If you set the real uid at all, or set the effective uid to a value not
   * equal to the real uid, then the saved uid is set to the new effective uid.
   *
   * This makes it possible for a setuid program to completely drop its
   * privileges, which is often a useful assertion to make when you are doing
   * a security audit over a program.
   *
   * The general idea is that a program which uses just setreuid() will be
   * 100% compatible with BSD.  A program which uses just setuid() will be
   * 100% compatible with POSIX with saved IDs. 
   */

  SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid)

  {

  	const struct cred *old;
  	struct cred *new;

  	int retval;

  	new = prepare_creds();
  	if (!new)
  		return -ENOMEM;
  	old = current_cred();

  	retval = -EPERM;

  	if (ruid != (uid_t) -1) {

  		new->uid = ruid;
  		if (old->uid != ruid &&
  		    old->euid != ruid &&

  		    !capable(CAP_SETUID))

  			goto error;

  	}
  
  	if (euid != (uid_t) -1) {

  		new->euid = euid;
  		if (old->uid != euid &&
  		    old->euid != euid &&
  		    old->suid != euid &&

  		    !capable(CAP_SETUID))

  			goto error;

  	}

  	if (new->uid != old->uid) {
  		retval = set_user(new);
  		if (retval < 0)
  			goto error;
  	}

  	if (ruid != (uid_t) -1 ||

  	    (euid != (uid_t) -1 && euid != old->uid))
  		new->suid = new->euid;
  	new->fsuid = new->euid;

  	retval = security_task_fix_setuid(new, old, LSM_SETID_RE);
  	if (retval < 0)
  		goto error;

  	return commit_creds(new);

  error:
  	abort_creds(new);
  	return retval;
  }

  		
  /*
   * setuid() is implemented like SysV with SAVED_IDS 
   * 
   * Note that SAVED_ID's is deficient in that a setuid root program
   * like sendmail, for example, cannot set its uid to be a normal 
   * user and then switch back, because if you're root, setuid() sets
   * the saved uid too.  If you don't like this, blame the bright people
   * in the POSIX committee and/or USG.  Note that the BSD-style setreuid()
   * will allow a root program to temporarily drop privileges and be able to
   * regain them by swapping the real and effective uid.  
   */

  SYSCALL_DEFINE1(setuid, uid_t, uid)

  {

  	const struct cred *old;
  	struct cred *new;

  	int retval;

  	new = prepare_creds();
  	if (!new)
  		return -ENOMEM;
  	old = current_cred();

  	retval = -EPERM;

  	if (capable(CAP_SETUID)) {

  		new->suid = new->uid = uid;

  		if (uid != old->uid) {
  			retval = set_user(new);
  			if (retval < 0)
  				goto error;

  		}
  	} else if (uid != old->uid && uid != new->suid) {
  		goto error;

  	}

  	new->fsuid = new->euid = uid;
  
  	retval = security_task_fix_setuid(new, old, LSM_SETID_ID);
  	if (retval < 0)
  		goto error;

  	return commit_creds(new);

  error:
  	abort_creds(new);
  	return retval;

  }
  
  
  /*
   * This function implements a generic ability to update ruid, euid,
   * and suid.  This allows you to implement the 4.4 compatible seteuid().
   */

  SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid)

  {

  	const struct cred *old;
  	struct cred *new;

  	int retval;

  	new = prepare_creds();
  	if (!new)
  		return -ENOMEM;

  	old = current_cred();

  	retval = -EPERM;

  	if (!capable(CAP_SETUID)) {

  		if (ruid != (uid_t) -1 && ruid != old->uid &&
  		    ruid != old->euid  && ruid != old->suid)
  			goto error;
  		if (euid != (uid_t) -1 && euid != old->uid &&
  		    euid != old->euid  && euid != old->suid)
  			goto error;
  		if (suid != (uid_t) -1 && suid != old->uid &&
  		    suid != old->euid  && suid != old->suid)
  			goto error;

  	}

  	if (ruid != (uid_t) -1) {

  		new->uid = ruid;

  		if (ruid != old->uid) {
  			retval = set_user(new);
  			if (retval < 0)
  				goto error;
  		}

  	}

  	if (euid != (uid_t) -1)
  		new->euid = euid;

  	if (suid != (uid_t) -1)

  		new->suid = suid;
  	new->fsuid = new->euid;

  	retval = security_task_fix_setuid(new, old, LSM_SETID_RES);
  	if (retval < 0)
  		goto error;

  	return commit_creds(new);

  error:
  	abort_creds(new);
  	return retval;

  }

  SYSCALL_DEFINE3(getresuid, uid_t __user *, ruid, uid_t __user *, euid, uid_t __user *, suid)

  {

  	const struct cred *cred = current_cred();

  	int retval;

  	if (!(retval   = put_user(cred->uid,  ruid)) &&
  	    !(retval   = put_user(cred->euid, euid)))

  		retval = put_user(cred->suid, suid);

  
  	return retval;
  }
  
  /*
   * Same as above, but for rgid, egid, sgid.
   */

  SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid)

  {

  	const struct cred *old;
  	struct cred *new;

  	int retval;

  	new = prepare_creds();
  	if (!new)
  		return -ENOMEM;
  	old = current_cred();

  	retval = -EPERM;

  	if (!capable(CAP_SETGID)) {

  		if (rgid != (gid_t) -1 && rgid != old->gid &&
  		    rgid != old->egid  && rgid != old->sgid)
  			goto error;
  		if (egid != (gid_t) -1 && egid != old->gid &&
  		    egid != old->egid  && egid != old->sgid)
  			goto error;
  		if (sgid != (gid_t) -1 && sgid != old->gid &&
  		    sgid != old->egid  && sgid != old->sgid)
  			goto error;

  	}

  	if (rgid != (gid_t) -1)

  		new->gid = rgid;
  	if (egid != (gid_t) -1)
  		new->egid = egid;

  	if (sgid != (gid_t) -1)

  		new->sgid = sgid;
  	new->fsgid = new->egid;

  	return commit_creds(new);
  
  error:
  	abort_creds(new);
  	return retval;

  }

  SYSCALL_DEFINE3(getresgid, gid_t __user *, rgid, gid_t __user *, egid, gid_t __user *, sgid)

  {

  	const struct cred *cred = current_cred();

  	int retval;

  	if (!(retval   = put_user(cred->gid,  rgid)) &&
  	    !(retval   = put_user(cred->egid, egid)))

  		retval = put_user(cred->sgid, sgid);

  
  	return retval;
  }
  
  
  /*
   * "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
   * is used for "access()" and for the NFS daemon (letting nfsd stay at
   * whatever uid it wants to). It normally shadows "euid", except when
   * explicitly set by setfsuid() or for access..
   */

  SYSCALL_DEFINE1(setfsuid, uid_t, uid)

  {

  	const struct cred *old;
  	struct cred *new;
  	uid_t old_fsuid;

  	new = prepare_creds();
  	if (!new)
  		return current_fsuid();
  	old = current_cred();
  	old_fsuid = old->fsuid;

  	if (uid == old->uid  || uid == old->euid  ||
  	    uid == old->suid || uid == old->fsuid ||

  	    capable(CAP_SETUID)) {
  		if (uid != old_fsuid) {

  			new->fsuid = uid;
  			if (security_task_fix_setuid(new, old, LSM_SETID_FS) == 0)
  				goto change_okay;

  		}

  	}

  	abort_creds(new);
  	return old_fsuid;

  change_okay:
  	commit_creds(new);

  	return old_fsuid;
  }
  
  /*

   * Samma på svenska..

   */

  SYSCALL_DEFINE1(setfsgid, gid_t, gid)

  {

  	const struct cred *old;
  	struct cred *new;
  	gid_t old_fsgid;
  
  	new = prepare_creds();
  	if (!new)
  		return current_fsgid();
  	old = current_cred();
  	old_fsgid = old->fsgid;

  	if (gid == old->gid  || gid == old->egid  ||
  	    gid == old->sgid || gid == old->fsgid ||

  	    capable(CAP_SETGID)) {
  		if (gid != old_fsgid) {

  			new->fsgid = gid;
  			goto change_okay;

  		}

  	}

  	abort_creds(new);
  	return old_fsgid;
  
  change_okay:
  	commit_creds(new);

  	return old_fsgid;
  }

  void do_sys_times(struct tms *tms)
  {

  	cputime_t tgutime, tgstime, cutime, cstime;

  	spin_lock_irq(&current->sighand->siglock);

  	thread_group_times(current, &tgutime, &tgstime);

  	cutime = current->signal->cutime;
  	cstime = current->signal->cstime;
  	spin_unlock_irq(&current->sighand->siglock);

  	tms->tms_utime = cputime_to_clock_t(tgutime);
  	tms->tms_stime = cputime_to_clock_t(tgstime);

  	tms->tms_cutime = cputime_to_clock_t(cutime);
  	tms->tms_cstime = cputime_to_clock_t(cstime);
  }

  SYSCALL_DEFINE1(times, struct tms __user *, tbuf)

  {

  	if (tbuf) {
  		struct tms tmp;

  
  		do_sys_times(&tmp);

  		if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
  			return -EFAULT;
  	}

  	force_successful_syscall_return();

  	return (long) jiffies_64_to_clock_t(get_jiffies_64());
  }
  
  /*
   * This needs some heavy checking ...
   * I just haven't the stomach for it. I also don't fully
   * understand sessions/pgrp etc. Let somebody who does explain it.
   *
   * OK, I think I have the protection semantics right.... this is really
   * only important on a multi-user system anyway, to make sure one user
   * can't send a signal to a process owned by another.  -TYT, 12/12/91
   *
   * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
   * LBT 04.03.94
   */

  SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)

  {
  	struct task_struct *p;

  	struct task_struct *group_leader = current->group_leader;

  	struct pid *pgrp;
  	int err;

  
  	if (!pid)

  		pid = task_pid_vnr(group_leader);

  	if (!pgid)
  		pgid = pid;
  	if (pgid < 0)
  		return -EINVAL;

  	rcu_read_lock();

  
  	/* From this point forward we keep holding onto the tasklist lock
  	 * so that our parent does not change from under us. -DaveM
  	 */
  	write_lock_irq(&tasklist_lock);
  
  	err = -ESRCH;

  	p = find_task_by_vpid(pid);

  	if (!p)
  		goto out;
  
  	err = -EINVAL;
  	if (!thread_group_leader(p))
  		goto out;

  	if (same_thread_group(p->real_parent, group_leader)) {

  		err = -EPERM;

  		if (task_session(p) != task_session(group_leader))

  			goto out;
  		err = -EACCES;
  		if (p->did_exec)
  			goto out;
  	} else {
  		err = -ESRCH;

  		if (p != group_leader)

  			goto out;
  	}
  
  	err = -EPERM;
  	if (p->signal->leader)
  		goto out;

  	pgrp = task_pid(p);

  	if (pgid != pid) {

  		struct task_struct *g;

  		pgrp = find_vpid(pgid);
  		g = pid_task(pgrp, PIDTYPE_PGID);

  		if (!g || task_session(g) != task_session(group_leader))

  			goto out;

  	}

  	err = security_task_setpgid(p, pgid);
  	if (err)
  		goto out;

  	if (task_pgrp(p) != pgrp)

  		change_pid(p, PIDTYPE_PGID, pgrp);

  
  	err = 0;
  out:
  	/* All paths lead to here, thus we are safe. -DaveM */
  	write_unlock_irq(&tasklist_lock);

  	rcu_read_unlock();

  	return err;
  }

  SYSCALL_DEFINE1(getpgid, pid_t, pid)

  {

  	struct task_struct *p;
  	struct pid *grp;
  	int retval;
  
  	rcu_read_lock();

  	if (!pid)

  		grp = task_pgrp(current);

  	else {

  		retval = -ESRCH;

  		p = find_task_by_vpid(pid);
  		if (!p)
  			goto out;
  		grp = task_pgrp(p);
  		if (!grp)
  			goto out;
  
  		retval = security_task_getpgid(p);
  		if (retval)
  			goto out;

  	}

  	retval = pid_vnr(grp);
  out:
  	rcu_read_unlock();
  	return retval;

  }
  
  #ifdef __ARCH_WANT_SYS_GETPGRP

  SYSCALL_DEFINE0(getpgrp)

  {

  	return sys_getpgid(0);

  }
  
  #endif

  SYSCALL_DEFINE1(getsid, pid_t, pid)

  {

  	struct task_struct *p;
  	struct pid *sid;
  	int retval;
  
  	rcu_read_lock();

  	if (!pid)

  		sid = task_session(current);

  	else {

  		retval = -ESRCH;

  		p = find_task_by_vpid(pid);
  		if (!p)
  			goto out;
  		sid = task_session(p);
  		if (!sid)
  			goto out;
  
  		retval = security_task_getsid(p);
  		if (retval)
  			goto out;

  	}

  	retval = pid_vnr(sid);
  out:
  	rcu_read_unlock();
  	return retval;

  }

  SYSCALL_DEFINE0(setsid)

  {

  	struct task_struct *group_leader = current->group_leader;

  	struct pid *sid = task_pid(group_leader);
  	pid_t session = pid_vnr(sid);

  	int err = -EPERM;

  	write_lock_irq(&tasklist_lock);

  	/* Fail if I am already a session leader */
  	if (group_leader->signal->leader)
  		goto out;

  	/* Fail if a process group id already exists that equals the
  	 * proposed session id.

  	 */

  	if (pid_task(sid, PIDTYPE_PGID))

  		goto out;

  	group_leader->signal->leader = 1;

  	__set_special_pids(sid);

  	proc_clear_tty(group_leader);

  	err = session;

  out:
  	write_unlock_irq(&tasklist_lock);

  	if (err > 0)
  		proc_sid_connector(group_leader);

  	return err;
  }

  DECLARE_RWSEM(uts_sem);

  #ifdef COMPAT_UTS_MACHINE
  #define override_architecture(name) \

  	(personality(current->personality) == PER_LINUX32 && \

  	 copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
  		      sizeof(COMPAT_UTS_MACHINE)))
  #else
  #define override_architecture(name)	0
  #endif

  SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)

  {
  	int errno = 0;
  
  	down_read(&uts_sem);

  	if (copy_to_user(name, utsname(), sizeof *name))

  		errno = -EFAULT;
  	up_read(&uts_sem);

  
  	if (!errno && override_architecture(name))
  		errno = -EFAULT;

  	return errno;
  }

  #ifdef __ARCH_WANT_SYS_OLD_UNAME
  /*
   * Old cruft
   */
  SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
  {
  	int error = 0;
  
  	if (!name)
  		return -EFAULT;
  
  	down_read(&uts_sem);
  	if (copy_to_user(name, utsname(), sizeof(*name)))
  		error = -EFAULT;
  	up_read(&uts_sem);
  
  	if (!error && override_architecture(name))
  		error = -EFAULT;
  	return error;
  }
  
  SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
  {
  	int error;
  
  	if (!name)
  		return -EFAULT;
  	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
  		return -EFAULT;
  
  	down_read(&uts_sem);
  	error = __copy_to_user(&name->sysname, &utsname()->sysname,
  			       __OLD_UTS_LEN);
  	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
  	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
  				__OLD_UTS_LEN);
  	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
  	error |= __copy_to_user(&name->release, &utsname()->release,
  				__OLD_UTS_LEN);
  	error |= __put_user(0, name->release + __OLD_UTS_LEN);
  	error |= __copy_to_user(&name->version, &utsname()->version,
  				__OLD_UTS_LEN);
  	error |= __put_user(0, name->version + __OLD_UTS_LEN);
  	error |= __copy_to_user(&name->machine, &utsname()->machine,
  				__OLD_UTS_LEN);
  	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
  	up_read(&uts_sem);
  
  	if (!error && override_architecture(name))
  		error = -EFAULT;
  	return error ? -EFAULT : 0;
  }
  #endif

  SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)

  {
  	int errno;
  	char tmp[__NEW_UTS_LEN];
  
  	if (!capable(CAP_SYS_ADMIN))
  		return -EPERM;
  	if (len < 0 || len > __NEW_UTS_LEN)
  		return -EINVAL;
  	down_write(&uts_sem);
  	errno = -EFAULT;
  	if (!copy_from_user(tmp, name, len)) {

  		struct new_utsname *u = utsname();
  
  		memcpy(u->nodename, tmp, len);
  		memset(u->nodename + len, 0, sizeof(u->nodename) - len);

  		errno = 0;
  	}
  	up_write(&uts_sem);
  	return errno;
  }
  
  #ifdef __ARCH_WANT_SYS_GETHOSTNAME

  SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)

  {
  	int i, errno;

  	struct new_utsname *u;

  
  	if (len < 0)
  		return -EINVAL;
  	down_read(&uts_sem);

  	u = utsname();
  	i = 1 + strlen(u->nodename);

  	if (i > len)
  		i = len;
  	errno = 0;

  	if (copy_to_user(name, u->nodename, i))

  		errno = -EFAULT;
  	up_read(&uts_sem);
  	return errno;
  }
  
  #endif
  
  /*
   * Only setdomainname; getdomainname can be implemented by calling
   * uname()
   */

  SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)

  {
  	int errno;
  	char tmp[__NEW_UTS_LEN];
  
  	if (!capable(CAP_SYS_ADMIN))
  		return -EPERM;
  	if (len < 0 || len > __NEW_UTS_LEN)
  		return -EINVAL;
  
  	down_write(&uts_sem);
  	errno = -EFAULT;
  	if (!copy_from_user(tmp, name, len)) {

  		struct new_utsname *u = utsname();
  
  		memcpy(u->domainname, tmp, len);
  		memset(u->domainname + len, 0, sizeof(u->domainname) - len);

  		errno = 0;
  	}
  	up_write(&uts_sem);
  	return errno;
  }

  SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)

  {

  	struct rlimit value;
  	int ret;
  
  	ret = do_prlimit(current, resource, NULL, &value);
  	if (!ret)
  		ret = copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
  
  	return ret;

  }
  
  #ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
  
  /*
   *	Back compatibility for getrlimit. Needed for some apps.
   */
   

  SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
  		struct rlimit __user *, rlim)

  {
  	struct rlimit x;
  	if (resource >= RLIM_NLIMITS)
  		return -EINVAL;
  
  	task_lock(current->group_leader);
  	x = current->signal->rlim[resource];
  	task_unlock(current->group_leader);

  	if (x.rlim_cur > 0x7FFFFFFF)

  		x.rlim_cur = 0x7FFFFFFF;

  	if (x.rlim_max > 0x7FFFFFFF)

  		x.rlim_max = 0x7FFFFFFF;
  	return copy_to_user(rlim, &x, sizeof(x))?-EFAULT:0;
  }
  
  #endif

  static inline bool rlim64_is_infinity(__u64 rlim64)
  {
  #if BITS_PER_LONG < 64
  	return rlim64 >= ULONG_MAX;
  #else
  	return rlim64 == RLIM64_INFINITY;
  #endif
  }
  
  static void rlim_to_rlim64(const struct rlimit *rlim, struct rlimit64 *rlim64)
  {
  	if (rlim->rlim_cur == RLIM_INFINITY)
  		rlim64->rlim_cur = RLIM64_INFINITY;
  	else
  		rlim64->rlim_cur = rlim->rlim_cur;
  	if (rlim->rlim_max == RLIM_INFINITY)
  		rlim64->rlim_max = RLIM64_INFINITY;
  	else
  		rlim64->rlim_max = rlim->rlim_max;
  }
  
  static void rlim64_to_rlim(const struct rlimit64 *rlim64, struct rlimit *rlim)
  {
  	if (rlim64_is_infinity(rlim64->rlim_cur))
  		rlim->rlim_cur = RLIM_INFINITY;
  	else
  		rlim->rlim_cur = (unsigned long)rlim64->rlim_cur;
  	if (rlim64_is_infinity(rlim64->rlim_max))
  		rlim->rlim_max = RLIM_INFINITY;
  	else
  		rlim->rlim_max = (unsigned long)rlim64->rlim_max;
  }

  /* make sure you are allowed to change @tsk limits before calling this */

  int do_prlimit(struct task_struct *tsk, unsigned int resource,
  		struct rlimit *new_rlim, struct rlimit *old_rlim)

  {

  	struct rlimit *rlim;

  	int retval = 0;

  
  	if (resource >= RLIM_NLIMITS)
  		return -EINVAL;

  	if (new_rlim) {
  		if (new_rlim->rlim_cur > new_rlim->rlim_max)
  			return -EINVAL;
  		if (resource == RLIMIT_NOFILE &&
  				new_rlim->rlim_max > sysctl_nr_open)
  			return -EPERM;
  	}

  	/* protect tsk->signal and tsk->sighand from disappearing */
  	read_lock(&tasklist_lock);
  	if (!tsk->sighand) {
  		retval = -ESRCH;
  		goto out;
  	}

  	rlim = tsk->signal->rlim + resource;

  	task_lock(tsk->group_leader);

  	if (new_rlim) {
  		if (new_rlim->rlim_max > rlim->rlim_max &&
  				!capable(CAP_SYS_RESOURCE))
  			retval = -EPERM;
  		if (!retval)
  			retval = security_task_setrlimit(tsk->group_leader,
  					resource, new_rlim);
  		if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
  			/*
  			 * The caller is asking for an immediate RLIMIT_CPU
  			 * expiry.  But we use the zero value to mean "it was
  			 * never set".  So let's cheat and make it one second
  			 * instead
  			 */
  			new_rlim->rlim_cur = 1;
  		}
  	}
  	if (!retval) {
  		if (old_rlim)
  			*old_rlim = *rlim;
  		if (new_rlim)
  			*rlim = *new_rlim;

  	}

  	task_unlock(tsk->group_leader);

  	/*
  	 * RLIMIT_CPU handling.   Note that the kernel fails to return an error
  	 * code if it rejected the user's attempt to set RLIMIT_CPU.  This is a
  	 * very long-standing error, and fixing it now risks breakage of
  	 * applications, so we live with it
  	 */

  	 if (!retval && new_rlim && resource == RLIMIT_CPU &&
  			 new_rlim->rlim_cur != RLIM_INFINITY)
  		update_rlimit_cpu(tsk, new_rlim->rlim_cur);

  out:

  	read_unlock(&tasklist_lock);

  	return retval;

  }

  /* rcu lock must be held */
  static int check_prlimit_permission(struct task_struct *task)
  {
  	const struct cred *cred = current_cred(), *tcred;
  
  	tcred = __task_cred(task);
  	if ((cred->uid != tcred->euid ||
  	     cred->uid != tcred->suid ||
  	     cred->uid != tcred->uid  ||
  	     cred->gid != tcred->egid ||
  	     cred->gid != tcred->sgid ||
  	     cred->gid != tcred->gid) &&
  	     !capable(CAP_SYS_RESOURCE)) {
  		return -EPERM;
  	}
  
  	return 0;
  }
  
  SYSCALL_DEFINE4(prlimit64, pid_t, pid, unsigned int, resource,
  		const struct rlimit64 __user *, new_rlim,
  		struct rlimit64 __user *, old_rlim)
  {
  	struct rlimit64 old64, new64;
  	struct rlimit old, new;
  	struct task_struct *tsk;
  	int ret;
  
  	if (new_rlim) {
  		if (copy_from_user(&new64, new_rlim, sizeof(new64)))
  			return -EFAULT;
  		rlim64_to_rlim(&new64, &new);
  	}
  
  	rcu_read_lock();
  	tsk = pid ? find_task_by_vpid(pid) : current;
  	if (!tsk) {
  		rcu_read_unlock();
  		return -ESRCH;
  	}
  	ret = check_prlimit_permission(tsk);
  	if (ret) {
  		rcu_read_unlock();
  		return ret;
  	}
  	get_task_struct(tsk);
  	rcu_read_unlock();
  
  	ret = do_prlimit(tsk, resource, new_rlim ? &new : NULL,
  			old_rlim ? &old : NULL);
  
  	if (!ret && old_rlim) {
  		rlim_to_rlim64(&old, &old64);
  		if (copy_to_user(old_rlim, &old64, sizeof(old64)))
  			ret = -EFAULT;
  	}
  
  	put_task_struct(tsk);
  	return ret;
  }

  SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
  {
  	struct rlimit new_rlim;
  
  	if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
  		return -EFAULT;

  	return do_prlimit(current, resource, &new_rlim, NULL);

  }

  /*
   * It would make sense to put struct rusage in the task_struct,
   * except that would make the task_struct be *really big*.  After
   * task_struct gets moved into malloc'ed memory, it would
   * make sense to do this.  It will make moving the rest of the information
   * a lot simpler!  (Which we're not doing right now because we're not
   * measuring them yet).
   *

   * When sampling multiple threads for RUSAGE_SELF, under SMP we might have
   * races with threads incrementing their own counters.  But since word
   * reads are atomic, we either get new values or old values and we don't
   * care which for the sums.  We always take the siglock to protect reading
   * the c* fields from p->signal from races with exit.c updating those
   * fields when reaping, so a sample either gets all the additions of a
   * given child after it's reaped, or none so this sample is before reaping.

   *

   * Locking:
   * We need to take the siglock for CHILDEREN, SELF and BOTH
   * for  the cases current multithreaded, non-current single threaded
   * non-current multithreaded.  Thread traversal is now safe with
   * the siglock held.
   * Strictly speaking, we donot need to take the siglock if we are current and
   * single threaded,  as no one else can take our signal_struct away, no one
   * else can  reap the  children to update signal->c* counters, and no one else
   * can race with the signal-> fields. If we do not take any lock, the
   * signal-> fields could be read out of order while another thread was just
   * exiting. So we should  place a read memory barrier when we avoid the lock.
   * On the writer side,  write memory barrier is implied in  __exit_signal
   * as __exit_signal releases  the siglock spinlock after updating the signal->
   * fields. But we don't do this yet to keep things simple.

   *

   */

  static void accumulate_thread_rusage(struct task_struct *t, struct rusage *r)

  {

  	r->ru_nvcsw += t->nvcsw;
  	r->ru_nivcsw += t->nivcsw;
  	r->ru_minflt += t->min_flt;
  	r->ru_majflt += t->maj_flt;
  	r->ru_inblock += task_io_get_inblock(t);
  	r->ru_oublock += task_io_get_oublock(t);
  }

  static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
  {
  	struct task_struct *t;
  	unsigned long flags;

  	cputime_t tgutime, tgstime, utime, stime;

  	unsigned long maxrss = 0;

  
  	memset((char *) r, 0, sizeof *r);

  	utime = stime = cputime_zero;

  	if (who == RUSAGE_THREAD) {

  		task_times(current, &utime, &stime);

  		accumulate_thread_rusage(p, r);

  		maxrss = p->signal->maxrss;

  		goto out;
  	}

  	if (!lock_task_sighand(p, &flags))

  		return;

  	switch (who) {

  		case RUSAGE_BOTH:

  		case RUSAGE_CHILDREN:

  			utime = p->signal->cutime;
  			stime = p->signal->cstime;
  			r->ru_nvcsw = p->signal->cnvcsw;
  			r->ru_nivcsw = p->signal->cnivcsw;
  			r->ru_minflt = p->signal->cmin_flt;
  			r->ru_majflt = p->signal->cmaj_flt;

  			r->ru_inblock = p->signal->cinblock;
  			r->ru_oublock = p->signal->coublock;

  			maxrss = p->signal->cmaxrss;

  
  			if (who == RUSAGE_CHILDREN)
  				break;

  		case RUSAGE_SELF:

  			thread_group_times(p, &tgutime, &tgstime);
  			utime = cputime_add(utime, tgutime);
  			stime = cputime_add(stime, tgstime);

  			r->ru_nvcsw += p->signal->nvcsw;
  			r->ru_nivcsw += p->signal->nivcsw;
  			r->ru_minflt += p->signal->min_flt;
  			r->ru_majflt += p->signal->maj_flt;

  			r->ru_inblock += p->signal->inblock;
  			r->ru_oublock += p->signal->oublock;

  			if (maxrss < p->signal->maxrss)
  				maxrss = p->signal->maxrss;

  			t = p;
  			do {

  				accumulate_thread_rusage(t, r);

  				t = next_thread(t);
  			} while (t != p);

  			break;

  		default:
  			BUG();
  	}

  	unlock_task_sighand(p, &flags);

  out:

  	cputime_to_timeval(utime, &r->ru_utime);
  	cputime_to_timeval(stime, &r->ru_stime);

  
  	if (who != RUSAGE_CHILDREN) {
  		struct mm_struct *mm = get_task_mm(p);
  		if (mm) {
  			setmax_mm_hiwater_rss(&maxrss, mm);
  			mmput(mm);
  		}
  	}
  	r->ru_maxrss = maxrss * (PAGE_SIZE / 1024); /* convert pages to KBs */

  }
  
  int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
  {
  	struct rusage r;

  	k_getrusage(p, who, &r);

  	return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
  }

  SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru)

  {

  	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
  	    who != RUSAGE_THREAD)

  		return -EINVAL;
  	return getrusage(current, who, ru);
  }

  SYSCALL_DEFINE1(umask, int, mask)

  {
  	mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
  	return mask;
  }

  SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
  		unsigned long, arg4, unsigned long, arg5)

  {

  	struct task_struct *me = current;
  	unsigned char comm[sizeof(me->comm)];
  	long error;

  	error = security_task_prctl(option, arg2, arg3, arg4, arg5);
  	if (error != -ENOSYS)

  		return error;

  	error = 0;

  	switch (option) {
  		case PR_SET_PDEATHSIG:

  			if (!valid_signal(arg2)) {

  				error = -EINVAL;
  				break;
  			}

  			me->pdeath_signal = arg2;
  			error = 0;

  			break;
  		case PR_GET_PDEATHSIG:

  			error = put_user(me->pdeath_signal, (int __user *)arg2);

  			break;
  		case PR_GET_DUMPABLE:

  			error = get_dumpable(me->mm);

  			break;
  		case PR_SET_DUMPABLE:

  			if (arg2 < 0 || arg2 > 1) {

  				error = -EINVAL;
  				break;
  			}

  			set_dumpable(me->mm, arg2);
  			error = 0;

  			break;
  
  		case PR_SET_UNALIGN:

  			error = SET_UNALIGN_CTL(me, arg2);

  			break;
  		case PR_GET_UNALIGN:

  			error = GET_UNALIGN_CTL(me, arg2);

  			break;
  		case PR_SET_FPEMU:

  			error = SET_FPEMU_CTL(me, arg2);

  			break;
  		case PR_GET_FPEMU:

  			error = GET_FPEMU_CTL(me, arg2);

  			break;
  		case PR_SET_FPEXC:

  			error = SET_FPEXC_CTL(me, arg2);

  			break;
  		case PR_GET_FPEXC:

  			error = GET_FPEXC_CTL(me, arg2);

  			break;
  		case PR_GET_TIMING:
  			error = PR_TIMING_STATISTICAL;
  			break;
  		case PR_SET_TIMING:

  			if (arg2 != PR_TIMING_STATISTICAL)

  				error = -EINVAL;

  			else
  				error = 0;

  			break;

  		case PR_SET_NAME:
  			comm[sizeof(me->comm)-1] = 0;
  			if (strncpy_from_user(comm, (char __user *)arg2,
  					      sizeof(me->comm) - 1) < 0)

  				return -EFAULT;

  			set_task_comm(me, comm);

  			return 0;

  		case PR_GET_NAME:
  			get_task_comm(comm, me);
  			if (copy_to_user((char __user *)arg2, comm,
  					 sizeof(comm)))

  				return -EFAULT;
  			return 0;

  		case PR_GET_ENDIAN:

  			error = GET_ENDIAN(me, arg2);

  			break;
  		case PR_SET_ENDIAN:

  			error = SET_ENDIAN(me, arg2);

  			break;

  		case PR_GET_SECCOMP:
  			error = prctl_get_seccomp();
  			break;
  		case PR_SET_SECCOMP:
  			error = prctl_set_seccomp(arg2);
  			break;

  		case PR_GET_TSC:
  			error = GET_TSC_CTL(arg2);
  			break;
  		case PR_SET_TSC:
  			error = SET_TSC_CTL(arg2);
  			break;

  		case PR_TASK_PERF_EVENTS_DISABLE:
  			error = perf_event_task_disable();

  			break;

  		case PR_TASK_PERF_EVENTS_ENABLE:
  			error = perf_event_task_enable();

  			break;

  		case PR_GET_TIMERSLACK:
  			error = current->timer_slack_ns;
  			break;
  		case PR_SET_TIMERSLACK:
  			if (arg2 <= 0)
  				current->timer_slack_ns =
  					current->default_timer_slack_ns;
  			else
  				current->timer_slack_ns = arg2;

  			error = 0;

  			break;

  		case PR_MCE_KILL:
  			if (arg4 | arg5)
  				return -EINVAL;
  			switch (arg2) {

  			case PR_MCE_KILL_CLEAR:

  				if (arg3 != 0)
  					return -EINVAL;
  				current->flags &= ~PF_MCE_PROCESS;
  				break;

  			case PR_MCE_KILL_SET:

  				current->flags |= PF_MCE_PROCESS;

  				if (arg3 == PR_MCE_KILL_EARLY)

  					current->flags |= PF_MCE_EARLY;

  				else if (arg3 == PR_MCE_KILL_LATE)

  					current->flags &= ~PF_MCE_EARLY;

  				else if (arg3 == PR_MCE_KILL_DEFAULT)
  					current->flags &=
  						~(PF_MCE_EARLY|PF_MCE_PROCESS);
  				else
  					return -EINVAL;

  				break;
  			default:
  				return -EINVAL;
  			}
  			error = 0;
  			break;

  		case PR_MCE_KILL_GET:
  			if (arg2 | arg3 | arg4 | arg5)
  				return -EINVAL;
  			if (current->flags & PF_MCE_PROCESS)
  				error = (current->flags & PF_MCE_EARLY) ?
  					PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
  			else
  				error = PR_MCE_KILL_DEFAULT;
  			break;

  		default:
  			error = -EINVAL;
  			break;
  	}
  	return error;
  }

  SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep,
  		struct getcpu_cache __user *, unused)

  {
  	int err = 0;
  	int cpu = raw_smp_processor_id();
  	if (cpup)
  		err |= put_user(cpu, cpup);
  	if (nodep)
  		err |= put_user(cpu_to_node(cpu), nodep);

  	return err ? -EFAULT : 0;
  }

  
  char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";

  static void argv_cleanup(struct subprocess_info *info)

  {

  	argv_free(info->argv);

  }
  
  /**
   * orderly_poweroff - Trigger an orderly system poweroff
   * @force: force poweroff if command execution fails
   *
   * This may be called from any context to trigger a system shutdown.
   * If the orderly shutdown fails, it will force an immediate shutdown.
   */
  int orderly_poweroff(bool force)
  {
  	int argc;
  	char **argv = argv_split(GFP_ATOMIC, poweroff_cmd, &argc);
  	static char *envp[] = {
  		"HOME=/",
  		"PATH=/sbin:/bin:/usr/sbin:/usr/bin",
  		NULL
  	};
  	int ret = -ENOMEM;
  	struct subprocess_info *info;
  
  	if (argv == NULL) {
  		printk(KERN_WARNING "%s failed to allocate memory for \"%s\"
  ",
  		       __func__, poweroff_cmd);
  		goto out;
  	}

  	info = call_usermodehelper_setup(argv[0], argv, envp, GFP_ATOMIC);

  	if (info == NULL) {
  		argv_free(argv);
  		goto out;
  	}

  	call_usermodehelper_setfns(info, NULL, argv_cleanup, NULL);

  	ret = call_usermodehelper_exec(info, UMH_NO_WAIT);

  
    out:
  	if (ret && force) {
  		printk(KERN_WARNING "Failed to start orderly shutdown: "
  		       "forcing the issue
  ");
  
  		/* I guess this should try to kick off some daemon to
  		   sync and poweroff asap.  Or not even bother syncing
  		   if we're doing an emergency shutdown? */
  		emergency_sync();
  		kernel_power_off();
  	}
  
  	return ret;
  }
  EXPORT_SYMBOL_GPL(orderly_poweroff);