Blame view
drivers/scsi/NCR_Q720.c
9.15 KB
1da177e4c Linux-2.6.12-rc2 |
1 2 3 4 5 6 7 8 9 10 11 12 |
/* -*- mode: c; c-basic-offset: 8 -*- */ /* NCR Quad 720 MCA SCSI Driver * * Copyright (C) 2003 by James.Bottomley@HansenPartnership.com */ #include <linux/blkdev.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mca.h> |
5a0e3ad6a include cleanup: ... |
13 |
#include <linux/slab.h> |
1da177e4c Linux-2.6.12-rc2 |
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 |
#include <linux/types.h> #include <linux/init.h> #include <linux/delay.h> #include <asm/io.h> #include "scsi.h" #include <scsi/scsi_host.h> #include "ncr53c8xx.h" #include "NCR_Q720.h" static struct ncr_chip q720_chip __initdata = { .revision_id = 0x0f, .burst_max = 3, .offset_max = 8, .nr_divisor = 4, .features = FE_WIDE | FE_DIFF | FE_VARCLK, }; MODULE_AUTHOR("James Bottomley"); MODULE_DESCRIPTION("NCR Quad 720 SCSI Driver"); MODULE_LICENSE("GPL"); #define NCR_Q720_VERSION "0.9" /* We needs this helper because we have up to four hosts per struct device */ struct NCR_Q720_private { struct device *dev; void __iomem * mem_base; __u32 phys_mem_base; __u32 mem_size; __u8 irq; __u8 siops; __u8 irq_enable; struct Scsi_Host *hosts[4]; }; static struct scsi_host_template NCR_Q720_tpnt = { .module = THIS_MODULE, .proc_name = "NCR_Q720", }; static irqreturn_t |
7d12e780e IRQ: Maintain reg... |
58 |
NCR_Q720_intr(int irq, void *data) |
1da177e4c Linux-2.6.12-rc2 |
59 60 61 62 63 64 65 66 67 68 69 70 71 |
{ struct NCR_Q720_private *p = (struct NCR_Q720_private *)data; __u8 sir = (readb(p->mem_base + 0x0d) & 0xf0) >> 4; __u8 siop; sir |= ~p->irq_enable; if(sir == 0xff) return IRQ_NONE; while((siop = ffz(sir)) < p->siops) { sir |= 1<<siop; |
7d12e780e IRQ: Maintain reg... |
72 |
ncr53c8xx_intr(irq, p->hosts[siop]); |
1da177e4c Linux-2.6.12-rc2 |
73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 |
} return IRQ_HANDLED; } static int __init NCR_Q720_probe_one(struct NCR_Q720_private *p, int siop, int irq, int slot, __u32 paddr, void __iomem *vaddr) { struct ncr_device device; __u8 scsi_id; static int unit = 0; __u8 scsr1 = readb(vaddr + NCR_Q720_SCSR_OFFSET + 1); __u8 differential = readb(vaddr + NCR_Q720_SCSR_OFFSET) & 0x20; __u8 version; int error; scsi_id = scsr1 >> 4; /* enable burst length 16 (FIXME: should allow this) */ scsr1 |= 0x02; /* force a siop reset */ scsr1 |= 0x04; writeb(scsr1, vaddr + NCR_Q720_SCSR_OFFSET + 1); udelay(10); version = readb(vaddr + 0x18) >> 4; memset(&device, 0, sizeof(struct ncr_device)); /* Initialise ncr_device structure with items required by ncr_attach. */ device.chip = q720_chip; device.chip.revision_id = version; device.host_id = scsi_id; device.dev = p->dev; device.slot.base = paddr; device.slot.base_c = paddr; device.slot.base_v = vaddr; device.slot.irq = irq; device.differential = differential ? 2 : 0; printk("Q720 probe unit %d (siop%d) at 0x%lx, diff = %d, vers = %d ", unit, siop, (unsigned long)paddr, differential, version); p->hosts[siop] = ncr_attach(&NCR_Q720_tpnt, unit++, &device); if (!p->hosts[siop]) goto fail; p->irq_enable |= (1<<siop); scsr1 = readb(vaddr + NCR_Q720_SCSR_OFFSET + 1); /* clear the disable interrupt bit */ scsr1 &= ~0x01; writeb(scsr1, vaddr + NCR_Q720_SCSR_OFFSET + 1); error = scsi_add_host(p->hosts[siop], p->dev); if (error) ncr53c8xx_release(p->hosts[siop]); else scsi_scan_host(p->hosts[siop]); return error; fail: return -ENODEV; } /* Detect a Q720 card. Note, because of the setup --- the chips are * essentially connectecd to the MCA bus independently, it is easier * to set them up as two separate host adapters, rather than one * adapter with two channels */ static int __init NCR_Q720_probe(struct device *dev) { struct NCR_Q720_private *p; static int banner = 1; struct mca_device *mca_dev = to_mca_device(dev); int slot = mca_dev->slot; int found = 0; int irq, i, siops; __u8 pos2, pos4, asr2, asr9, asr10; __u16 io_base; __u32 base_addr, mem_size; void __iomem *mem_base; |
dd00cc486 some kmalloc/mems... |
152 |
p = kzalloc(sizeof(*p), GFP_KERNEL); |
1da177e4c Linux-2.6.12-rc2 |
153 154 |
if (!p) return -ENOMEM; |
1da177e4c Linux-2.6.12-rc2 |
155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 |
pos2 = mca_device_read_pos(mca_dev, 2); /* enable device */ pos2 |= NCR_Q720_POS2_BOARD_ENABLE | NCR_Q720_POS2_INTERRUPT_ENABLE; mca_device_write_pos(mca_dev, 2, pos2); io_base = (pos2 & NCR_Q720_POS2_IO_MASK) << NCR_Q720_POS2_IO_SHIFT; if(banner) { printk(KERN_NOTICE "NCR Q720: Driver Version " NCR_Q720_VERSION " " "NCR Q720: Copyright (c) 2003 by James.Bottomley@HansenPartnership.com " "NCR Q720: "); banner = 0; } io_base = mca_device_transform_ioport(mca_dev, io_base); /* OK, this is phase one of the bootstrap, we now know the * I/O space base address. All the configuration registers * are mapped here (including pos) */ /* sanity check I/O mapping */ i = inb(io_base) | (inb(io_base+1)<<8); if(i != NCR_Q720_MCA_ID) { printk(KERN_ERR "NCR_Q720, adapter failed to I/O map registers correctly at 0x%x(0x%x) ", io_base, i); kfree(p); return -ENODEV; } /* Phase II, find the ram base and memory map the board register */ pos4 = inb(io_base + 4); /* enable streaming data */ pos4 |= 0x01; outb(pos4, io_base + 4); base_addr = (pos4 & 0x7e) << 20; base_addr += (pos4 & 0x80) << 23; asr10 = inb(io_base + 0x12); base_addr += (asr10 & 0x80) << 24; base_addr += (asr10 & 0x70) << 23; /* OK, got the base addr, now we need to find the ram size, * enable and map it */ asr9 = inb(io_base + 0x11); i = (asr9 & 0xc0) >> 6; if(i == 0) mem_size = 1024; else mem_size = 1 << (19 + i); /* enable the sram mapping */ asr9 |= 0x20; /* disable the rom mapping */ asr9 &= ~0x10; outb(asr9, io_base + 0x11); if(!request_mem_region(base_addr, mem_size, "NCR_Q720")) { printk(KERN_ERR "NCR_Q720: Failed to claim memory region 0x%lx -0x%lx", (unsigned long)base_addr, (unsigned long)(base_addr + mem_size)); goto out_free; } if (dma_declare_coherent_memory(dev, base_addr, base_addr, mem_size, DMA_MEMORY_MAP) != DMA_MEMORY_MAP) { printk(KERN_ERR "NCR_Q720: DMA declare memory failed "); goto out_release_region; } /* The first 1k of the memory buffer is a memory map of the registers */ mem_base = dma_mark_declared_memory_occupied(dev, base_addr, 1024); if (IS_ERR(mem_base)) { printk("NCR_Q720 failed to reserve memory mapped region "); goto out_release; } /* now also enable accesses in asr 2 */ asr2 = inb(io_base + 0x0a); asr2 |= 0x01; outb(asr2, io_base + 0x0a); /* get the number of SIOPs (this should be 2 or 4) */ siops = ((asr2 & 0xe0) >> 5) + 1; /* sanity check mapping (again) */ i = readw(mem_base); if(i != NCR_Q720_MCA_ID) { printk(KERN_ERR "NCR_Q720, adapter failed to memory map registers correctly at 0x%lx(0x%x) ", (unsigned long)base_addr, i); goto out_release; } irq = readb(mem_base + 5) & 0x0f; /* now do the bus related transforms */ irq = mca_device_transform_irq(mca_dev, irq); printk(KERN_NOTICE "NCR Q720: found in slot %d irq = %d mem base = 0x%lx siops = %d ", slot, irq, (unsigned long)base_addr, siops); printk(KERN_NOTICE "NCR Q720: On board ram %dk ", mem_size/1024); p->dev = dev; p->mem_base = mem_base; p->phys_mem_base = base_addr; p->mem_size = mem_size; p->irq = irq; p->siops = siops; |
1d6f359a2 [PATCH] irq-flags... |
276 |
if (request_irq(irq, NCR_Q720_intr, IRQF_SHARED, "NCR_Q720", p)) { |
1da177e4c Linux-2.6.12-rc2 |
277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 |
printk(KERN_ERR "NCR_Q720: request irq %d failed ", irq); goto out_release; } /* disable all the siop interrupts */ for(i = 0; i < siops; i++) { void __iomem *reg_scsr1 = mem_base + NCR_Q720_CHIP_REGISTER_OFFSET + i*NCR_Q720_SIOP_SHIFT + NCR_Q720_SCSR_OFFSET + 1; __u8 scsr1 = readb(reg_scsr1); scsr1 |= 0x01; writeb(scsr1, reg_scsr1); } /* plumb in all 720 chips */ for (i = 0; i < siops; i++) { void __iomem *siop_v_base = mem_base + NCR_Q720_CHIP_REGISTER_OFFSET + i*NCR_Q720_SIOP_SHIFT; __u32 siop_p_base = base_addr + NCR_Q720_CHIP_REGISTER_OFFSET + i*NCR_Q720_SIOP_SHIFT; __u16 port = io_base + NCR_Q720_CHIP_REGISTER_OFFSET + i*NCR_Q720_SIOP_SHIFT; int err; outb(0xff, port + 0x40); outb(0x07, port + 0x41); if ((err = NCR_Q720_probe_one(p, i, irq, slot, siop_p_base, siop_v_base)) != 0) printk("Q720: SIOP%d: probe failed, error = %d ", i, err); else found++; } if (!found) { kfree(p); return -ENODEV; } mca_device_set_claim(mca_dev, 1); mca_device_set_name(mca_dev, "NCR_Q720"); dev_set_drvdata(dev, p); return 0; out_release: dma_release_declared_memory(dev); out_release_region: release_mem_region(base_addr, mem_size); out_free: kfree(p); return -ENODEV; } static void __exit NCR_Q720_remove_one(struct Scsi_Host *host) { scsi_remove_host(host); ncr53c8xx_release(host); } static int __exit NCR_Q720_remove(struct device *dev) { struct NCR_Q720_private *p = dev_get_drvdata(dev); int i; for (i = 0; i < p->siops; i++) if(p->hosts[i]) NCR_Q720_remove_one(p->hosts[i]); dma_release_declared_memory(dev); release_mem_region(p->phys_mem_base, p->mem_size); free_irq(p->irq, p); kfree(p); return 0; } static short NCR_Q720_id_table[] = { NCR_Q720_MCA_ID, 0 }; static struct mca_driver NCR_Q720_driver = { .id_table = NCR_Q720_id_table, .driver = { .name = "NCR_Q720", .bus = &mca_bus_type, .probe = NCR_Q720_probe, |
6f0397905 Drivers: scsi: re... |
364 |
.remove = NCR_Q720_remove, |
1da177e4c Linux-2.6.12-rc2 |
365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 |
}, }; static int __init NCR_Q720_init(void) { int ret = ncr53c8xx_init(); if (!ret) ret = mca_register_driver(&NCR_Q720_driver); if (ret) ncr53c8xx_exit(); return ret; } static void __exit NCR_Q720_exit(void) { mca_unregister_driver(&NCR_Q720_driver); ncr53c8xx_exit(); } module_init(NCR_Q720_init); module_exit(NCR_Q720_exit); |