Pulse Width Modulation (PWM) interface
  
  This provides an overview about the Linux PWM interface
  
  PWMs are commonly used for controlling LEDs, fans or vibrators in
  cell phones. PWMs with a fixed purpose have no need implementing
  the Linux PWM API (although they could). However, PWMs are often
  found as discrete devices on SoCs which have no fixed purpose. It's
  up to the board designer to connect them to LEDs or fans. To provide
  this kind of flexibility the generic PWM API exists.
  
  Identifying PWMs
  ----------------

  Users of the legacy PWM API use unique IDs to refer to PWM devices.
  
  Instead of referring to a PWM device via its unique ID, board setup code
  should instead register a static mapping that can be used to match PWM
  consumers to providers, as given in the following example:
  
  	static struct pwm_lookup board_pwm_lookup[] = {
  		PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL),
  	};
  
  	static void __init board_init(void)
  	{
  		...
  		pwm_add_table(board_pwm_lookup, ARRAY_SIZE(board_pwm_lookup));
  		...
  	}

  
  Using PWMs
  ----------

  Legacy users can request a PWM device using pwm_request() and free it
  after usage with pwm_free().
  
  New users should use the pwm_get() function and pass to it the consumer

  device or a consumer name. pwm_put() is used to free the PWM device. Managed
  variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.

  
  After being requested a PWM has to be configured using:

  
  int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
  
  To start/stop toggling the PWM output use pwm_enable()/pwm_disable().
  
  Implementing a PWM driver
  -------------------------
  
  Currently there are two ways to implement pwm drivers. Traditionally
  there only has been the barebone API meaning that each driver has
  to implement the pwm_*() functions itself. This means that it's impossible
  to have multiple PWM drivers in the system. For this reason it's mandatory
  for new drivers to use the generic PWM framework.

  
  A new PWM controller/chip can be added using pwmchip_add() and removed
  again with pwmchip_remove(). pwmchip_add() takes a filled in struct
  pwm_chip as argument which provides a description of the PWM chip, the
  number of PWM devices provider by the chip and the chip-specific
  implementation of the supported PWM operations to the framework.

  
  Locking
  -------
  
  The PWM core list manipulations are protected by a mutex, so pwm_request()
  and pwm_free() may not be called from an atomic context. Currently the
  PWM core does not enforce any locking to pwm_enable(), pwm_disable() and
  pwm_config(), so the calling context is currently driver specific. This
  is an issue derived from the former barebone API and should be fixed soon.
  
  Helpers
  -------
  
  Currently a PWM can only be configured with period_ns and duty_ns. For several
  use cases freq_hz and duty_percent might be better. Instead of calculating
  this in your driver please consider adding appropriate helpers to the framework.