/* linux/drivers/char/pc8736x_gpio.c
  
     National Semiconductor PC8736x GPIO driver.  Allows a user space
     process to play with the GPIO pins.

     Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com>

  
     adapted from linux/drivers/char/scx200_gpio.c
     Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>,
  */

  #include <linux/fs.h>
  #include <linux/module.h>
  #include <linux/errno.h>
  #include <linux/kernel.h>
  #include <linux/init.h>

  #include <linux/cdev.h>

  #include <linux/io.h>

  #include <linux/ioport.h>

  #include <linux/mutex.h>

  #include <linux/nsc_gpio.h>

  #include <linux/platform_device.h>

  #include <asm/uaccess.h>

  #define DEVNAME "pc8736x_gpio"

  
  MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");

  MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver");

  MODULE_LICENSE("GPL");
  
  static int major;		/* default to dynamic major */
  module_param(major, int, 0);
  MODULE_PARM_DESC(major, "Major device number");

  static DEFINE_MUTEX(pc8736x_gpio_config_lock);

  static unsigned pc8736x_gpio_base;

  static u8 pc8736x_gpio_shadow[4];

  
  #define SIO_BASE1       0x2E	/* 1st command-reg to check */
  #define SIO_BASE2       0x4E	/* alt command-reg to check */

  
  #define SIO_SID		0x20	/* SuperI/O ID Register */

  #define SIO_SID_PC87365	0xe5	/* Expected value in ID Register for PC87365 */
  #define SIO_SID_PC87366	0xe9	/* Expected value in ID Register for PC87366 */

  
  #define SIO_CF1		0x21	/* chip config, bit0 is chip enable */

  #define PC8736X_GPIO_RANGE	16 /* ioaddr range */
  #define PC8736X_GPIO_CT		32 /* minors matching 4 8 bit ports */

  #define SIO_UNIT_SEL	0x7	/* unit select reg */
  #define SIO_UNIT_ACT	0x30	/* unit enable */
  #define SIO_GPIO_UNIT	0x7	/* unit number of GPIO */
  #define SIO_VLM_UNIT	0x0D
  #define SIO_TMS_UNIT	0x0E
  
  /* config-space addrs to read/write each unit's runtime addr */
  #define SIO_BASE_HADDR		0x60
  #define SIO_BASE_LADDR		0x61
  
  /* GPIO config-space pin-control addresses */
  #define SIO_GPIO_PIN_SELECT	0xF0
  #define SIO_GPIO_PIN_CONFIG     0xF1
  #define SIO_GPIO_PIN_EVENT      0xF2
  
  static unsigned char superio_cmd = 0;
  static unsigned char selected_device = 0xFF;	/* bogus start val */
  
  /* GPIO port runtime access, functionality */
  static int port_offset[] = { 0, 4, 8, 10 };	/* non-uniform offsets ! */
  /* static int event_capable[] = { 1, 1, 0, 0 };   ports 2,3 are hobbled */
  
  #define PORT_OUT	0
  #define PORT_IN		1
  #define PORT_EVT_EN	2
  #define PORT_EVT_STST	3

  static struct platform_device *pdev;  /* use in dev_*() */

  static inline void superio_outb(int addr, int val)
  {
  	outb_p(addr, superio_cmd);
  	outb_p(val, superio_cmd + 1);
  }
  
  static inline int superio_inb(int addr)
  {
  	outb_p(addr, superio_cmd);
  	return inb_p(superio_cmd + 1);
  }
  
  static int pc8736x_superio_present(void)
  {

  	int id;

  	/* try the 2 possible values, read a hardware reg to verify */
  	superio_cmd = SIO_BASE1;

  	id = superio_inb(SIO_SID);
  	if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)

  		return superio_cmd;
  
  	superio_cmd = SIO_BASE2;

  	id = superio_inb(SIO_SID);
  	if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)

  		return superio_cmd;
  
  	return 0;
  }
  
  static void device_select(unsigned devldn)
  {
  	superio_outb(SIO_UNIT_SEL, devldn);
  	selected_device = devldn;
  }
  
  static void select_pin(unsigned iminor)
  {
  	/* select GPIO port/pin from device minor number */
  	device_select(SIO_GPIO_UNIT);
  	superio_outb(SIO_GPIO_PIN_SELECT,
  		     ((iminor << 1) & 0xF0) | (iminor & 0x7));
  }
  
  static inline u32 pc8736x_gpio_configure_fn(unsigned index, u32 mask, u32 bits,
  					    u32 func_slct)
  {
  	u32 config, new_config;

  	mutex_lock(&pc8736x_gpio_config_lock);

  
  	device_select(SIO_GPIO_UNIT);
  	select_pin(index);
  
  	/* read current config value */
  	config = superio_inb(func_slct);
  
  	/* set new config */
  	new_config = (config & mask) | bits;
  	superio_outb(func_slct, new_config);

  	mutex_unlock(&pc8736x_gpio_config_lock);

  
  	return config;
  }
  
  static u32 pc8736x_gpio_configure(unsigned index, u32 mask, u32 bits)
  {
  	return pc8736x_gpio_configure_fn(index, mask, bits,
  					 SIO_GPIO_PIN_CONFIG);
  }
  
  static int pc8736x_gpio_get(unsigned minor)
  {
  	int port, bit, val;
  
  	port = minor >> 3;
  	bit = minor & 7;
  	val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
  	val >>= bit;
  	val &= 1;

  	dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d
  ",
  		minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
  		val);

  
  	return val;
  }
  
  static void pc8736x_gpio_set(unsigned minor, int val)
  {
  	int port, bit, curval;
  
  	minor &= 0x1f;
  	port = minor >> 3;
  	bit = minor & 7;
  	curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);

  	dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d
  ",
  		pc8736x_gpio_base + port_offset[port] + PORT_OUT,
  		curval, bit, (curval & ~(1 << bit)), val, (val << bit));

  
  	val = (curval & ~(1 << bit)) | (val << bit);

  	dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)"
  		" %2x -> %2x
  ", minor, port, bit, curval, val);

  
  	outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT);
  
  	curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
  	val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);

  	dev_dbg(&pdev->dev, "wrote %x, read: %x
  ", curval, val);

  	pc8736x_gpio_shadow[port] = val;

  }

  static int pc8736x_gpio_current(unsigned minor)

  {

  	int port, bit;
  	minor &= 0x1f;
  	port = minor >> 3;
  	bit = minor & 7;
  	return ((pc8736x_gpio_shadow[port] >> bit) & 0x01);

  }
  
  static void pc8736x_gpio_change(unsigned index)
  {

  	pc8736x_gpio_set(index, !pc8736x_gpio_current(index));

  }

  static struct nsc_gpio_ops pc8736x_gpio_ops = {

  	.owner		= THIS_MODULE,
  	.gpio_config	= pc8736x_gpio_configure,
  	.gpio_dump	= nsc_gpio_dump,
  	.gpio_get	= pc8736x_gpio_get,
  	.gpio_set	= pc8736x_gpio_set,

  	.gpio_change	= pc8736x_gpio_change,
  	.gpio_current	= pc8736x_gpio_current
  };
  
  static int pc8736x_gpio_open(struct inode *inode, struct file *file)
  {
  	unsigned m = iminor(inode);

  	file->private_data = &pc8736x_gpio_ops;

  	dev_dbg(&pdev->dev, "open %d
  ", m);

  	if (m >= PC8736X_GPIO_CT)

  		return -EINVAL;
  	return nonseekable_open(inode, file);
  }

  static const struct file_operations pc8736x_gpio_fileops = {

  	.owner	= THIS_MODULE,
  	.open	= pc8736x_gpio_open,
  	.write	= nsc_gpio_write,
  	.read	= nsc_gpio_read,

  	.llseek = no_llseek,

  };

  static void __init pc8736x_init_shadow(void)
  {
  	int port;
  
  	/* read the current values driven on the GPIO signals */
  	for (port = 0; port < 4; ++port)
  		pc8736x_gpio_shadow[port]
  		    = inb_p(pc8736x_gpio_base + port_offset[port]
  			    + PORT_OUT);
  
  }

  static struct cdev pc8736x_gpio_cdev;

  static int __init pc8736x_gpio_init(void)
  {

  	int rc;
  	dev_t devid;

  
  	pdev = platform_device_alloc(DEVNAME, 0);
  	if (!pdev)
  		return -ENOMEM;

  	rc = platform_device_add(pdev);
  	if (rc) {
  		rc = -ENODEV;
  		goto undo_platform_dev_alloc;
  	}
  	dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing
  ");

  
  	if (!pc8736x_superio_present()) {

  		rc = -ENODEV;
  		dev_err(&pdev->dev, "no device found
  ");
  		goto undo_platform_dev_add;

  	}

  	pc8736x_gpio_ops.dev = &pdev->dev;

  
  	/* Verify that chip and it's GPIO unit are both enabled.
  	   My BIOS does this, so I take minimum action here
  	 */
  	rc = superio_inb(SIO_CF1);
  	if (!(rc & 0x01)) {

  		rc = -ENODEV;
  		dev_err(&pdev->dev, "device not enabled
  ");
  		goto undo_platform_dev_add;

  	}
  	device_select(SIO_GPIO_UNIT);
  	if (!superio_inb(SIO_UNIT_ACT)) {

  		rc = -ENODEV;
  		dev_err(&pdev->dev, "GPIO unit not enabled
  ");
  		goto undo_platform_dev_add;

  	}

  	/* read the GPIO unit base addr that chip responds to */

  	pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
  			     | superio_inb(SIO_BASE_LADDR));

  	if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) {

  		rc = -ENODEV;
  		dev_err(&pdev->dev, "GPIO ioport %x busy
  ",
  			pc8736x_gpio_base);
  		goto undo_platform_dev_add;
  	}
  	dev_info(&pdev->dev, "GPIO ioport %x reserved
  ", pc8736x_gpio_base);

  	if (major) {
  		devid = MKDEV(major, 0);
  		rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME);
  	} else {
  		rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME);
  		major = MAJOR(devid);
  	}

  	if (rc < 0) {
  		dev_err(&pdev->dev, "register-chrdev failed: %d
  ", rc);

  		goto undo_request_region;

  	}
  	if (!major) {

  		major = rc;
  		dev_dbg(&pdev->dev, "got dynamic major %d
  ", major);

  	}
  
  	pc8736x_init_shadow();

  
  	/* ignore minor errs, and succeed */

  	cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);

  	cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);

  	return 0;

  undo_request_region:
  	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);

  undo_platform_dev_add:

  	platform_device_del(pdev);

  undo_platform_dev_alloc:

  	platform_device_put(pdev);

  	return rc;

  }
  
  static void __exit pc8736x_gpio_cleanup(void)
  {

  	dev_dbg(&pdev->dev, "cleanup
  ");

  	cdev_del(&pc8736x_gpio_cdev);
  	unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);
  	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);

  	platform_device_del(pdev);
  	platform_device_put(pdev);

  }
  
  module_init(pc8736x_gpio_init);
  module_exit(pc8736x_gpio_cleanup);