/* Code to support devices on the DIO and DIO-II bus
   * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
   * Copyright (C) 2004 Jochen Friedrich <jochen@scram.de>
   * 
   * This code has basically these routines at the moment:
   * int dio_find(u_int deviceid)
   *    Search the list of DIO devices and return the select code
   *    of the next unconfigured device found that matches the given device ID.
   *    Note that the deviceid parameter should be the encoded ID.
   *    This means that framebuffers should pass it as 
   *    DIO_ENCODE_ID(DIO_ID_FBUFFER,DIO_ID2_TOPCAT)
   *    (or whatever); everybody else just uses DIO_ID_FOOBAR.
   * unsigned long dio_scodetophysaddr(int scode)
   *    Return the physical address corresponding to the given select code.
   * int dio_scodetoipl(int scode)
   *    Every DIO card has a fixed interrupt priority level. This function 
   *    returns it, whatever it is.
   * const char *dio_scodetoname(int scode)
   *    Return a character string describing this board [might be "" if 
   *    not CONFIG_DIO_CONSTANTS]
   * void dio_config_board(int scode)     mark board as configured in the list
   * void dio_unconfig_board(int scode)   mark board as no longer configured
   *
   * This file is based on the way the Amiga port handles Zorro II cards, 
   * although we aren't so complicated...
   */
  #include <linux/module.h>
  #include <linux/string.h>
  #include <linux/types.h>
  #include <linux/kernel.h>
  #include <linux/init.h>
  #include <linux/dio.h>
  #include <linux/slab.h>                         /* kmalloc() */
  #include <asm/uaccess.h>
  #include <asm/io.h>                             /* readb() */
  
  struct dio_bus dio_bus = {
  	.resources = {
  		/* DIO range */
  		{ .name = "DIO mem", .start = 0x00600000, .end = 0x007fffff },
  		/* DIO-II range */
  		{ .name = "DIO-II mem", .start = 0x01000000, .end = 0x1fffffff }
  	},
  	.name = "DIO bus"
  };
  
  /* not a real config option yet! */
  #define CONFIG_DIO_CONSTANTS
  
  #ifdef CONFIG_DIO_CONSTANTS
  /* We associate each numeric ID with an appropriate descriptive string
   * using a constant array of these structs.
   * FIXME: we should be able to arrange to throw away most of the strings
   * using the initdata stuff. Then we wouldn't need to worry about 
   * carrying them around...
   * I think we do this by copying them into newly kmalloc()ed memory and 
   * marking the names[] array as .initdata ?
   */
  struct dioname
  {
          int id;
          const char *name;
  };
  
  /* useful macro */
  #define DIONAME(x) { DIO_ID_##x, DIO_DESC_##x }
  #define DIOFBNAME(x) { DIO_ENCODE_ID( DIO_ID_FBUFFER, DIO_ID2_##x), DIO_DESC2_##x }
  
  static struct dioname names[] = 
  {
          DIONAME(DCA0), DIONAME(DCA0REM), DIONAME(DCA1), DIONAME(DCA1REM),
          DIONAME(DCM), DIONAME(DCMREM),
          DIONAME(LAN),
          DIONAME(FHPIB), DIONAME(NHPIB),
          DIONAME(SCSI0), DIONAME(SCSI1), DIONAME(SCSI2), DIONAME(SCSI3),
          DIONAME(FBUFFER),
          DIONAME(PARALLEL), DIONAME(VME), DIONAME(DCL), DIONAME(DCLREM),
          DIONAME(MISC0), DIONAME(MISC1), DIONAME(MISC2), DIONAME(MISC3),
          DIONAME(MISC4), DIONAME(MISC5), DIONAME(MISC6), DIONAME(MISC7),
          DIONAME(MISC8), DIONAME(MISC9), DIONAME(MISC10), DIONAME(MISC11), 
          DIONAME(MISC12), DIONAME(MISC13),
          DIOFBNAME(GATORBOX), DIOFBNAME(TOPCAT), DIOFBNAME(RENAISSANCE),
          DIOFBNAME(LRCATSEYE), DIOFBNAME(HRCCATSEYE), DIOFBNAME(HRMCATSEYE),
          DIOFBNAME(DAVINCI), DIOFBNAME(XXXCATSEYE), DIOFBNAME(HYPERION),
          DIOFBNAME(XGENESIS), DIOFBNAME(TIGER), DIOFBNAME(YGENESIS)   
  };
  
  #undef DIONAME
  #undef DIOFBNAME

  static const char *unknowndioname 
          = "unknown DIO board -- please email <linux-m68k@lists.linux-m68k.org>!";
  
  static const char *dio_getname(int id)
  {
          /* return pointer to a constant string describing the board with given ID */
  	unsigned int i;

  	for (i = 0; i < ARRAY_SIZE(names); i++)

                  if (names[i].id == id) 
                          return names[i].name;
  
          return unknowndioname;
  }
  
  #else
  
  static char dio_no_name[] = { 0 };
  #define dio_getname(_id)	(dio_no_name)
  
  #endif /* CONFIG_DIO_CONSTANTS */
  
  int __init dio_find(int deviceid)
  {
  	/* Called to find a DIO device before the full bus scan has run.
  	 * Only used by the console driver.
  	 */
  	int scode, id;
  	u_char prid, secid, i;
  	mm_segment_t fs;
  
  	for (scode = 0; scode < DIO_SCMAX; scode++) {
  		void *va;
  		unsigned long pa;
  
                  if (DIO_SCINHOLE(scode))
                          continue;
  
                  pa = dio_scodetophysaddr(scode);
  
  		if (!pa)
  			continue;
  
  		if (scode < DIOII_SCBASE)
  			va = (void *)(pa + DIO_VIRADDRBASE);
  		else
  			va = ioremap(pa, PAGE_SIZE);
  
  		fs = get_fs();
  		set_fs(KERNEL_DS);
  
                  if (get_user(i, (unsigned char *)va + DIO_IDOFF)) {
  			set_fs(fs);
  			if (scode >= DIOII_SCBASE)
  				iounmap(va);
                          continue;             /* no board present at that select code */
  		}
  
  		set_fs(fs);
  		prid = DIO_ID(va);
  
                  if (DIO_NEEDSSECID(prid)) {
                          secid = DIO_SECID(va);
                          id = DIO_ENCODE_ID(prid, secid);
                  } else
  			id = prid;
  
  		if (id == deviceid) {
  			if (scode >= DIOII_SCBASE)
  				iounmap(va);
  			return scode;
  		}
  	}
  
  	return -1;
  }
  
  /* This is the function that scans the DIO space and works out what
   * hardware is actually present.
   */
  static int __init dio_init(void)
  {
  	int scode;
  	mm_segment_t fs;
  	int i;
  	struct dio_dev *dev;

  	int error;

  
  	if (!MACH_IS_HP300)
  		return 0;
  
          printk(KERN_INFO "Scanning for DIO devices...
  ");
  
  	/* Initialize the DIO bus */ 
  	INIT_LIST_HEAD(&dio_bus.devices);

  	dev_set_name(&dio_bus.dev, "dio");

  	error = device_register(&dio_bus.dev);
  	if (error) {
  		pr_err("DIO: Error registering dio_bus
  ");
  		return error;
  	}

  
  	/* Request all resources */
  	dio_bus.num_resources = (hp300_model == HP_320 ? 1 : 2);
  	for (i = 0; i < dio_bus.num_resources; i++)
  		request_resource(&iomem_resource, &dio_bus.resources[i]);
  
  	/* Register all devices */
          for (scode = 0; scode < DIO_SCMAX; ++scode)
          {
                  u_char prid, secid = 0;        /* primary, secondary ID bytes */
                  u_char *va;
  		unsigned long pa;
                  
                  if (DIO_SCINHOLE(scode))
                          continue;
  
  		pa = dio_scodetophysaddr(scode);
  
  		if (!pa)
  			continue;
  
  		if (scode < DIOII_SCBASE)
  			va = (void *)(pa + DIO_VIRADDRBASE);
  		else
  			va = ioremap(pa, PAGE_SIZE);
  
  		fs = get_fs();
  		set_fs(KERNEL_DS);
  
                  if (get_user(i, (unsigned char *)va + DIO_IDOFF)) {
  			set_fs(fs);
  			if (scode >= DIOII_SCBASE)
  				iounmap(va);
                          continue;              /* no board present at that select code */
  		}
  
  		set_fs(fs);
  
                  /* Found a board, allocate it an entry in the list */

  		dev = kzalloc(sizeof(struct dio_dev), GFP_KERNEL);

  		if (!dev)
  			return 0;

  		dev->bus = &dio_bus;
  		dev->dev.parent = &dio_bus.dev;
  		dev->dev.bus = &dio_bus_type;
  		dev->scode = scode;
  		dev->resource.start = pa;
  		dev->resource.end = pa + DIO_SIZE(scode, va);

  		dev_set_name(&dev->dev, "%02x", scode);

  
                  /* read the ID byte(s) and encode if necessary. */
  		prid = DIO_ID(va);
  
                  if (DIO_NEEDSSECID(prid)) {
                          secid = DIO_SECID(va);
                          dev->id = DIO_ENCODE_ID(prid, secid);
                  } else
                          dev->id = prid;
  
                  dev->ipl = DIO_IPL(va);
                  strcpy(dev->name,dio_getname(dev->id));
                  printk(KERN_INFO "select code %3d: ipl %d: ID %02X", dev->scode, dev->ipl, prid);
                  if (DIO_NEEDSSECID(prid))
                          printk(":%02X", secid);
                  printk(": %s
  ", dev->name);
  
  		if (scode >= DIOII_SCBASE)
  			iounmap(va);

  		error = device_register(&dev->dev);
  		if (error) {
  			pr_err("DIO: Error registering device %s
  ",
  			       dev->name);
  			continue;
  		}
  		error = dio_create_sysfs_dev_files(dev);
  		if (error)
  			dev_err(&dev->dev, "Error creating sysfs files
  ");

          }
  	return 0;
  }
  
  subsys_initcall(dio_init);
  
  /* Bear in mind that this is called in the very early stages of initialisation
   * in order to get the address of the serial port for the console...
   */
  unsigned long dio_scodetophysaddr(int scode)
  {
          if (scode >= DIOII_SCBASE) {
                  return (DIOII_BASE + (scode - 132) * DIOII_DEVSIZE);
          } else if (scode > DIO_SCMAX || scode < 0)
                  return 0;
          else if (DIO_SCINHOLE(scode))
                  return 0;
  
          return (DIO_BASE + scode * DIO_DEVSIZE);
  }