Blame view
drivers/rpmsg/virtio_rpmsg_bus.c
29.7 KB
bcabbccab rpmsg: add virtio... |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 |
/* * Virtio-based remote processor messaging bus * * Copyright (C) 2011 Texas Instruments, Inc. * Copyright (C) 2011 Google, Inc. * * Ohad Ben-Cohen <ohad@wizery.com> * Brian Swetland <swetland@google.com> * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #define pr_fmt(fmt) "%s: " fmt, __func__ #include <linux/kernel.h> #include <linux/module.h> #include <linux/virtio.h> #include <linux/virtio_ids.h> #include <linux/virtio_config.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/idr.h> #include <linux/jiffies.h> #include <linux/sched.h> #include <linux/wait.h> #include <linux/rpmsg.h> #include <linux/mutex.h> |
a16644cb3 rpmsg: Enable mat... |
36 |
#include <linux/of_device.h> |
bcabbccab rpmsg: add virtio... |
37 |
|
8b881c07c rpmsg: Move helpe... |
38 |
#include "rpmsg_internal.h" |
bcabbccab rpmsg: add virtio... |
39 40 41 42 43 44 45 |
/** * struct virtproc_info - virtual remote processor state * @vdev: the virtio device * @rvq: rx virtqueue * @svq: tx virtqueue * @rbufs: kernel address of rx buffers * @sbufs: kernel address of tx buffers |
b1b989144 rpmsg: use less b... |
46 |
* @num_bufs: total number of buffers for rx and tx |
bcabbccab rpmsg: add virtio... |
47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 |
* @last_sbuf: index of last tx buffer used * @bufs_dma: dma base addr of the buffers * @tx_lock: protects svq, sbufs and sleepers, to allow concurrent senders. * sending a message might require waking up a dozing remote * processor, which involves sleeping, hence the mutex. * @endpoints: idr of local endpoints, allows fast retrieval * @endpoints_lock: lock of the endpoints set * @sendq: wait queue of sending contexts waiting for a tx buffers * @sleepers: number of senders that are waiting for a tx buffer * @ns_ept: the bus's name service endpoint * * This structure stores the rpmsg state of a given virtio remote processor * device (there might be several virtio proc devices for each physical * remote processor). */ struct virtproc_info { struct virtio_device *vdev; struct virtqueue *rvq, *svq; void *rbufs, *sbufs; |
b1b989144 rpmsg: use less b... |
66 |
unsigned int num_bufs; |
bcabbccab rpmsg: add virtio... |
67 68 69 70 71 72 73 74 75 |
int last_sbuf; dma_addr_t bufs_dma; struct mutex tx_lock; struct idr endpoints; struct mutex endpoints_lock; wait_queue_head_t sendq; atomic_t sleepers; struct rpmsg_endpoint *ns_ept; }; |
e88dae5da rpmsg: Move virti... |
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 |
/* The feature bitmap for virtio rpmsg */ #define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ /** * struct rpmsg_hdr - common header for all rpmsg messages * @src: source address * @dst: destination address * @reserved: reserved for future use * @len: length of payload (in bytes) * @flags: message flags * @data: @len bytes of message payload data * * Every message sent(/received) on the rpmsg bus begins with this header. */ struct rpmsg_hdr { u32 src; u32 dst; u32 reserved; u16 len; u16 flags; u8 data[0]; } __packed; /** * struct rpmsg_ns_msg - dynamic name service announcement message * @name: name of remote service that is published * @addr: address of remote service that is published * @flags: indicates whether service is created or destroyed * * This message is sent across to publish a new service, or announce * about its removal. When we receive these messages, an appropriate * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe() * or ->remove() handler of the appropriate rpmsg driver will be invoked * (if/as-soon-as one is registered). */ struct rpmsg_ns_msg { char name[RPMSG_NAME_SIZE]; u32 addr; u32 flags; } __packed; /** * enum rpmsg_ns_flags - dynamic name service announcement flags * * @RPMSG_NS_CREATE: a new remote service was just created * @RPMSG_NS_DESTROY: a known remote service was just destroyed */ enum rpmsg_ns_flags { RPMSG_NS_CREATE = 0, RPMSG_NS_DESTROY = 1, }; |
3bf950ff2 rpmsg: virtio: Hi... |
127 128 129 130 131 132 133 134 135 136 137 |
/** * @vrp: the remote processor this channel belongs to */ struct virtio_rpmsg_channel { struct rpmsg_device rpdev; struct virtproc_info *vrp; }; #define to_virtio_rpmsg_channel(_rpdev) \ container_of(_rpdev, struct virtio_rpmsg_channel, rpdev) |
bcabbccab rpmsg: add virtio... |
138 |
/* |
b1b989144 rpmsg: use less b... |
139 140 141 |
* We're allocating buffers of 512 bytes each for communications. The * number of buffers will be computed from the number of buffers supported * by the vring, upto a maximum of 512 buffers (256 in each direction). |
bcabbccab rpmsg: add virtio... |
142 143 144 145 |
* * Each buffer will have 16 bytes for the msg header and 496 bytes for * the payload. * |
b1b989144 rpmsg: use less b... |
146 |
* This will utilize a maximum total space of 256KB for the buffers. |
bcabbccab rpmsg: add virtio... |
147 148 149 150 151 152 153 154 155 |
* * We might also want to add support for user-provided buffers in time. * This will allow bigger buffer size flexibility, and can also be used * to achieve zero-copy messaging. * * Note that these numbers are purely a decision of this driver - we * can change this without changing anything in the firmware of the remote * processor. */ |
b1b989144 rpmsg: use less b... |
156 |
#define MAX_RPMSG_NUM_BUFS (512) |
bcabbccab rpmsg: add virtio... |
157 |
#define RPMSG_BUF_SIZE (512) |
bcabbccab rpmsg: add virtio... |
158 159 160 161 162 163 164 165 166 167 |
/* * Local addresses are dynamically allocated on-demand. * We do not dynamically assign addresses from the low 1024 range, * in order to reserve that address range for predefined services. */ #define RPMSG_RESERVED_ADDRESSES (1024) /* Address 53 is reserved for advertising remote services */ #define RPMSG_NS_ADDR (53) |
8a228ecfe rpmsg: Indirectio... |
168 169 170 171 172 173 174 175 176 177 178 |
static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept); static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len); static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst); static int virtio_rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, void *data, int len); static int virtio_rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len); static int virtio_rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst); static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, void *data, int len); |
bcabbccab rpmsg: add virtio... |
179 |
|
8a228ecfe rpmsg: Indirectio... |
180 181 182 183 184 185 186 187 188 |
static const struct rpmsg_endpoint_ops virtio_endpoint_ops = { .destroy_ept = virtio_rpmsg_destroy_ept, .send = virtio_rpmsg_send, .sendto = virtio_rpmsg_sendto, .send_offchannel = virtio_rpmsg_send_offchannel, .trysend = virtio_rpmsg_trysend, .trysendto = virtio_rpmsg_trysendto, .trysend_offchannel = virtio_rpmsg_trysend_offchannel, }; |
5a081caa0 rpmsg: avoid prem... |
189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 |
/** * __ept_release() - deallocate an rpmsg endpoint * @kref: the ept's reference count * * This function deallocates an ept, and is invoked when its @kref refcount * drops to zero. * * Never invoke this function directly! */ static void __ept_release(struct kref *kref) { struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint, refcount); /* * At this point no one holds a reference to ept anymore, * so we can directly free it */ kfree(ept); } |
bcabbccab rpmsg: add virtio... |
208 209 |
/* for more info, see below documentation of rpmsg_create_ept() */ static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp, |
92e1de51b rpmsg: Clean up r... |
210 |
struct rpmsg_device *rpdev, |
0963679c0 rpmsg: align code... |
211 212 |
rpmsg_rx_cb_t cb, void *priv, u32 addr) |
bcabbccab rpmsg: add virtio... |
213 |
{ |
d0ffce779 rpmsg: convert to... |
214 |
int id_min, id_max, id; |
bcabbccab rpmsg: add virtio... |
215 216 |
struct rpmsg_endpoint *ept; struct device *dev = rpdev ? &rpdev->dev : &vrp->vdev->dev; |
bcabbccab rpmsg: add virtio... |
217 |
ept = kzalloc(sizeof(*ept), GFP_KERNEL); |
a8bb3fd90 rpmsg: remove poi... |
218 |
if (!ept) |
bcabbccab rpmsg: add virtio... |
219 |
return NULL; |
bcabbccab rpmsg: add virtio... |
220 |
|
5a081caa0 rpmsg: avoid prem... |
221 |
kref_init(&ept->refcount); |
15fd943af rpmsg: make sure ... |
222 |
mutex_init(&ept->cb_lock); |
5a081caa0 rpmsg: avoid prem... |
223 |
|
bcabbccab rpmsg: add virtio... |
224 225 226 |
ept->rpdev = rpdev; ept->cb = cb; ept->priv = priv; |
8a228ecfe rpmsg: Indirectio... |
227 |
ept->ops = &virtio_endpoint_ops; |
bcabbccab rpmsg: add virtio... |
228 229 |
/* do we need to allocate a local address ? */ |
d0ffce779 rpmsg: convert to... |
230 231 232 233 234 235 236 |
if (addr == RPMSG_ADDR_ANY) { id_min = RPMSG_RESERVED_ADDRESSES; id_max = 0; } else { id_min = addr; id_max = addr + 1; } |
bcabbccab rpmsg: add virtio... |
237 238 239 240 |
mutex_lock(&vrp->endpoints_lock); /* bind the endpoint to an rpmsg address (and allocate one if needed) */ |
d0ffce779 rpmsg: convert to... |
241 242 243 244 |
id = idr_alloc(&vrp->endpoints, ept, id_min, id_max, GFP_KERNEL); if (id < 0) { dev_err(dev, "idr_alloc failed: %d ", id); |
bcabbccab rpmsg: add virtio... |
245 246 |
goto free_ept; } |
d0ffce779 rpmsg: convert to... |
247 |
ept->addr = id; |
bcabbccab rpmsg: add virtio... |
248 249 250 251 |
mutex_unlock(&vrp->endpoints_lock); return ept; |
bcabbccab rpmsg: add virtio... |
252 253 |
free_ept: mutex_unlock(&vrp->endpoints_lock); |
5a081caa0 rpmsg: avoid prem... |
254 |
kref_put(&ept->refcount, __ept_release); |
bcabbccab rpmsg: add virtio... |
255 256 |
return NULL; } |
36b72c7dc rpmsg: Introduce ... |
257 258 259 260 261 |
static struct rpmsg_endpoint *virtio_rpmsg_create_ept(struct rpmsg_device *rpdev, rpmsg_rx_cb_t cb, void *priv, struct rpmsg_channel_info chinfo) { |
3bf950ff2 rpmsg: virtio: Hi... |
262 263 264 |
struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); return __rpmsg_create_ept(vch->vrp, rpdev, cb, priv, chinfo.src); |
36b72c7dc rpmsg: Introduce ... |
265 |
} |
bcabbccab rpmsg: add virtio... |
266 |
/** |
fa2d7795b rpmsg: fix name s... |
267 268 |
* __rpmsg_destroy_ept() - destroy an existing rpmsg endpoint * @vrp: virtproc which owns this ept |
bcabbccab rpmsg: add virtio... |
269 270 |
* @ept: endpoing to destroy * |
fa2d7795b rpmsg: fix name s... |
271 272 273 274 |
* An internal function which destroy an ept without assuming it is * bound to an rpmsg channel. This is needed for handling the internal * name service endpoint, which isn't bound to an rpmsg channel. * See also __rpmsg_create_ept(). |
bcabbccab rpmsg: add virtio... |
275 |
*/ |
fa2d7795b rpmsg: fix name s... |
276 277 |
static void __rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept) |
bcabbccab rpmsg: add virtio... |
278 |
{ |
15fd943af rpmsg: make sure ... |
279 |
/* make sure new inbound messages can't find this ept anymore */ |
bcabbccab rpmsg: add virtio... |
280 281 282 |
mutex_lock(&vrp->endpoints_lock); idr_remove(&vrp->endpoints, ept->addr); mutex_unlock(&vrp->endpoints_lock); |
15fd943af rpmsg: make sure ... |
283 284 285 286 |
/* make sure in-flight inbound messages won't invoke cb anymore */ mutex_lock(&ept->cb_lock); ept->cb = NULL; mutex_unlock(&ept->cb_lock); |
5a081caa0 rpmsg: avoid prem... |
287 |
kref_put(&ept->refcount, __ept_release); |
bcabbccab rpmsg: add virtio... |
288 |
} |
fa2d7795b rpmsg: fix name s... |
289 |
|
8a228ecfe rpmsg: Indirectio... |
290 291 |
static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept) { |
3bf950ff2 rpmsg: virtio: Hi... |
292 293 294 |
struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(ept->rpdev); __rpmsg_destroy_ept(vch->vrp, ept); |
8a228ecfe rpmsg: Indirectio... |
295 |
} |
36b72c7dc rpmsg: Introduce ... |
296 297 |
static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev) { |
3bf950ff2 rpmsg: virtio: Hi... |
298 299 |
struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); struct virtproc_info *vrp = vch->vrp; |
36b72c7dc rpmsg: Introduce ... |
300 301 |
struct device *dev = &rpdev->dev; int err = 0; |
bcabbccab rpmsg: add virtio... |
302 303 |
/* need to tell remote processor's name service about this channel ? */ if (rpdev->announce && |
0963679c0 rpmsg: align code... |
304 |
virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) { |
bcabbccab rpmsg: add virtio... |
305 306 307 |
struct rpmsg_ns_msg nsm; strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE); |
2a48d7322 rpmsg: rpmsg_send... |
308 |
nsm.addr = rpdev->ept->addr; |
bcabbccab rpmsg: add virtio... |
309 |
nsm.flags = RPMSG_NS_CREATE; |
2a48d7322 rpmsg: rpmsg_send... |
310 |
err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR); |
bcabbccab rpmsg: add virtio... |
311 312 313 314 |
if (err) dev_err(dev, "failed to announce service %d ", err); } |
bcabbccab rpmsg: add virtio... |
315 316 |
return err; } |
36b72c7dc rpmsg: Introduce ... |
317 |
static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev) |
bcabbccab rpmsg: add virtio... |
318 |
{ |
3bf950ff2 rpmsg: virtio: Hi... |
319 320 |
struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); struct virtproc_info *vrp = vch->vrp; |
36b72c7dc rpmsg: Introduce ... |
321 |
struct device *dev = &rpdev->dev; |
bcabbccab rpmsg: add virtio... |
322 323 324 325 |
int err = 0; /* tell remote processor's name service we're removing this channel */ if (rpdev->announce && |
0963679c0 rpmsg: align code... |
326 |
virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) { |
bcabbccab rpmsg: add virtio... |
327 328 329 330 331 |
struct rpmsg_ns_msg nsm; strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE); nsm.addr = rpdev->src; nsm.flags = RPMSG_NS_DESTROY; |
2a48d7322 rpmsg: rpmsg_send... |
332 |
err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR); |
bcabbccab rpmsg: add virtio... |
333 334 335 336 |
if (err) dev_err(dev, "failed to announce service %d ", err); } |
36b72c7dc rpmsg: Introduce ... |
337 338 |
return err; } |
36b72c7dc rpmsg: Introduce ... |
339 340 341 342 343 |
static const struct rpmsg_device_ops virtio_rpmsg_ops = { .create_ept = virtio_rpmsg_create_ept, .announce_create = virtio_rpmsg_announce_create, .announce_destroy = virtio_rpmsg_announce_destroy, }; |
bcabbccab rpmsg: add virtio... |
344 345 346 347 348 |
/* * create an rpmsg channel using its name and address info. * this function will be used to create both static and dynamic * channels. */ |
92e1de51b rpmsg: Clean up r... |
349 350 |
static struct rpmsg_device *rpmsg_create_channel(struct virtproc_info *vrp, struct rpmsg_channel_info *chinfo) |
bcabbccab rpmsg: add virtio... |
351 |
{ |
3bf950ff2 rpmsg: virtio: Hi... |
352 |
struct virtio_rpmsg_channel *vch; |
92e1de51b rpmsg: Clean up r... |
353 |
struct rpmsg_device *rpdev; |
bcabbccab rpmsg: add virtio... |
354 355 356 357 |
struct device *tmp, *dev = &vrp->vdev->dev; int ret; /* make sure a similar channel doesn't already exist */ |
8b881c07c rpmsg: Move helpe... |
358 |
tmp = rpmsg_find_device(dev, chinfo); |
bcabbccab rpmsg: add virtio... |
359 360 361 362 363 364 365 366 |
if (tmp) { /* decrement the matched device's refcount back */ put_device(tmp); dev_err(dev, "channel %s:%x:%x already exist ", chinfo->name, chinfo->src, chinfo->dst); return NULL; } |
3bf950ff2 rpmsg: virtio: Hi... |
367 368 |
vch = kzalloc(sizeof(*vch), GFP_KERNEL); if (!vch) |
bcabbccab rpmsg: add virtio... |
369 |
return NULL; |
bcabbccab rpmsg: add virtio... |
370 |
|
3bf950ff2 rpmsg: virtio: Hi... |
371 372 373 374 375 376 377 378 |
/* Link the channel to our vrp */ vch->vrp = vrp; /* Assign callbacks for rpmsg_channel */ vch->rpdev.ops = &virtio_rpmsg_ops; /* Assign public information to the rpmsg_device */ rpdev = &vch->rpdev; |
bcabbccab rpmsg: add virtio... |
379 380 |
rpdev->src = chinfo->src; rpdev->dst = chinfo->dst; |
36b72c7dc rpmsg: Introduce ... |
381 |
rpdev->ops = &virtio_rpmsg_ops; |
bcabbccab rpmsg: add virtio... |
382 383 384 385 386 |
/* * rpmsg server channels has predefined local address (for now), * and their existence needs to be announced remotely */ |
c8ced113c rpmsg: remove unn... |
387 |
rpdev->announce = rpdev->src != RPMSG_ADDR_ANY; |
bcabbccab rpmsg: add virtio... |
388 389 |
strncpy(rpdev->id.name, chinfo->name, RPMSG_NAME_SIZE); |
6eed598a0 rpmsg: Split off ... |
390 391 392 393 394 395 396 |
rpdev->dev.parent = &vrp->vdev->dev; ret = rpmsg_register_device(rpdev); if (ret) return NULL; return rpdev; } |
bcabbccab rpmsg: add virtio... |
397 398 399 400 401 402 403 404 405 406 407 408 409 |
/* super simple buffer "allocator" that is just enough for now */ static void *get_a_tx_buf(struct virtproc_info *vrp) { unsigned int len; void *ret; /* support multiple concurrent senders */ mutex_lock(&vrp->tx_lock); /* * either pick the next unused tx buffer * (half of our buffers are used for sending messages) */ |
b1b989144 rpmsg: use less b... |
410 |
if (vrp->last_sbuf < vrp->num_bufs / 2) |
bcabbccab rpmsg: add virtio... |
411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 |
ret = vrp->sbufs + RPMSG_BUF_SIZE * vrp->last_sbuf++; /* or recycle a used one */ else ret = virtqueue_get_buf(vrp->svq, &len); mutex_unlock(&vrp->tx_lock); return ret; } /** * rpmsg_upref_sleepers() - enable "tx-complete" interrupts, if needed * @vrp: virtual remote processor state * * This function is called before a sender is blocked, waiting for * a tx buffer to become available. * * If we already have blocking senders, this function merely increases * the "sleepers" reference count, and exits. * * Otherwise, if this is the first sender to block, we also enable * virtio's tx callbacks, so we'd be immediately notified when a tx * buffer is consumed (we rely on virtio's tx callback in order * to wake up sleeping senders as soon as a tx buffer is used by the * remote processor). */ static void rpmsg_upref_sleepers(struct virtproc_info *vrp) { /* support multiple concurrent senders */ mutex_lock(&vrp->tx_lock); /* are we the first sleeping context waiting for tx buffers ? */ if (atomic_inc_return(&vrp->sleepers) == 1) /* enable "tx-complete" interrupts before dozing off */ virtqueue_enable_cb(vrp->svq); mutex_unlock(&vrp->tx_lock); } /** * rpmsg_downref_sleepers() - disable "tx-complete" interrupts, if needed * @vrp: virtual remote processor state * * This function is called after a sender, that waited for a tx buffer * to become available, is unblocked. * * If we still have blocking senders, this function merely decreases * the "sleepers" reference count, and exits. * * Otherwise, if there are no more blocking senders, we also disable * virtio's tx callbacks, to avoid the overhead incurred with handling * those (now redundant) interrupts. */ static void rpmsg_downref_sleepers(struct virtproc_info *vrp) { /* support multiple concurrent senders */ mutex_lock(&vrp->tx_lock); /* are we the last sleeping context waiting for tx buffers ? */ if (atomic_dec_and_test(&vrp->sleepers)) /* disable "tx-complete" interrupts */ virtqueue_disable_cb(vrp->svq); mutex_unlock(&vrp->tx_lock); } |
b2e994334 MLK-13887: rpmsg:... |
476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 |
static int sg_init_one_full(struct scatterlist *sg, const void *buf, unsigned int buflen) { const bool vmalloced_buf = is_vmalloc_addr(buf); struct page *vm_page; /* get page for high memory */ if (vmalloced_buf) { vm_page = vmalloc_to_page(buf); if (!vm_page) return -ENOMEM; sg_init_table(sg, 1); sg_set_page(sg, vm_page, RPMSG_BUF_SIZE, offset_in_page(buf)); } else sg_init_one(sg, buf, buflen); return 0; } |
bcabbccab rpmsg: add virtio... |
496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 |
/** * rpmsg_send_offchannel_raw() - send a message across to the remote processor * @rpdev: the rpmsg channel * @src: source address * @dst: destination address * @data: payload of message * @len: length of payload * @wait: indicates whether caller should block in case no TX buffers available * * This function is the base implementation for all of the rpmsg sending API. * * It will send @data of length @len to @dst, and say it's from @src. The * message will be sent to the remote processor which the @rpdev channel * belongs to. * * The message is sent using one of the TX buffers that are available for * communication with this remote processor. * * If @wait is true, the caller will be blocked until either a TX buffer is * available, or 15 seconds elapses (we don't want callers to * sleep indefinitely due to misbehaving remote processors), and in that * case -ERESTARTSYS is returned. The number '15' itself was picked * arbitrarily; there's little point in asking drivers to provide a timeout * value themselves. * * Otherwise, if @wait is false, and there are no TX buffers available, * the function will immediately fail, and -ENOMEM will be returned. * * Normally drivers shouldn't use this function directly; instead, drivers * should use the appropriate rpmsg_{try}send{to, _offchannel} API * (see include/linux/rpmsg.h). * * Returns 0 on success and an appropriate error value on failure. */ |
8a228ecfe rpmsg: Indirectio... |
530 531 532 |
static int rpmsg_send_offchannel_raw(struct rpmsg_device *rpdev, u32 src, u32 dst, void *data, int len, bool wait) |
bcabbccab rpmsg: add virtio... |
533 |
{ |
3bf950ff2 rpmsg: virtio: Hi... |
534 535 |
struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); struct virtproc_info *vrp = vch->vrp; |
bcabbccab rpmsg: add virtio... |
536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 |
struct device *dev = &rpdev->dev; struct scatterlist sg; struct rpmsg_hdr *msg; int err; /* bcasting isn't allowed */ if (src == RPMSG_ADDR_ANY || dst == RPMSG_ADDR_ANY) { dev_err(dev, "invalid addr (src 0x%x, dst 0x%x) ", src, dst); return -EINVAL; } /* * We currently use fixed-sized buffers, and therefore the payload * length is limited. * * One of the possible improvements here is either to support * user-provided buffers (and then we can also support zero-copy * messaging), or to improve the buffer allocator, to support * variable-length buffer sizes. */ if (len > RPMSG_BUF_SIZE - sizeof(struct rpmsg_hdr)) { dev_err(dev, "message is too big (%d) ", len); return -EMSGSIZE; } /* grab a buffer */ msg = get_a_tx_buf(vrp); if (!msg && !wait) return -ENOMEM; /* no free buffer ? wait for one (but bail after 15 seconds) */ while (!msg) { /* enable "tx-complete" interrupts, if not already enabled */ rpmsg_upref_sleepers(vrp); /* * sleep until a free buffer is available or 15 secs elapse. * the timeout period is not configurable because there's * little point in asking drivers to specify that. * if later this happens to be required, it'd be easy to add. */ err = wait_event_interruptible_timeout(vrp->sendq, (msg = get_a_tx_buf(vrp)), msecs_to_jiffies(15000)); /* disable "tx-complete" interrupts if we're the last sleeper */ rpmsg_downref_sleepers(vrp); /* timeout ? */ if (!err) { dev_err(dev, "timeout waiting for a tx buffer "); return -ERESTARTSYS; } } msg->len = len; msg->flags = 0; msg->src = src; msg->dst = dst; msg->reserved = 0; memcpy(msg->data, data, len); dev_dbg(dev, "TX From 0x%x, To 0x%x, Len %d, Flags %d, Reserved %d ", |
0963679c0 rpmsg: align code... |
603 |
msg->src, msg->dst, msg->len, msg->flags, msg->reserved); |
211e3a93e rpmsg: use dynami... |
604 605 606 607 |
#if defined(CONFIG_DYNAMIC_DEBUG) dynamic_hex_dump("rpmsg_virtio TX: ", DUMP_PREFIX_NONE, 16, 1, msg, sizeof(*msg) + msg->len, true); #endif |
bcabbccab rpmsg: add virtio... |
608 |
|
b2e994334 MLK-13887: rpmsg:... |
609 610 611 612 613 614 |
err = sg_init_one_full(&sg, msg, sizeof(*msg) + len); if (err) { dev_err(dev, "virtqueue_add_outbuf sg_init failed: %d ", err); return err; } |
bcabbccab rpmsg: add virtio... |
615 616 617 618 |
mutex_lock(&vrp->tx_lock); /* add message to the remote processor's virtqueue */ |
cee51d69a virtio_rpmsg_bus:... |
619 |
err = virtqueue_add_outbuf(vrp->svq, &sg, 1, msg, GFP_KERNEL); |
57e1a3734 virtio: rpmsg: ma... |
620 |
if (err) { |
bcabbccab rpmsg: add virtio... |
621 622 623 624 625 |
/* * need to reclaim the buffer here, otherwise it's lost * (memory won't leak, but rpmsg won't use it again for TX). * this will wait for a buffer management overhaul. */ |
cee51d69a virtio_rpmsg_bus:... |
626 627 |
dev_err(dev, "virtqueue_add_outbuf failed: %d ", err); |
bcabbccab rpmsg: add virtio... |
628 629 630 631 632 |
goto out; } /* tell the remote processor it has a pending message to read */ virtqueue_kick(vrp->svq); |
bcabbccab rpmsg: add virtio... |
633 634 635 636 637 |
out: mutex_unlock(&vrp->tx_lock); return err; } EXPORT_SYMBOL(rpmsg_send_offchannel_raw); |
8a228ecfe rpmsg: Indirectio... |
638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 |
static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len) { struct rpmsg_device *rpdev = ept->rpdev; u32 src = ept->addr, dst = rpdev->dst; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); } static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst) { struct rpmsg_device *rpdev = ept->rpdev; u32 src = ept->addr; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); } static int virtio_rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, void *data, int len) { struct rpmsg_device *rpdev = ept->rpdev; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); } static int virtio_rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len) { struct rpmsg_device *rpdev = ept->rpdev; u32 src = ept->addr, dst = rpdev->dst; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); } static int virtio_rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst) { struct rpmsg_device *rpdev = ept->rpdev; u32 src = ept->addr; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); } static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, void *data, int len) { struct rpmsg_device *rpdev = ept->rpdev; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); } |
1aa7d6a5d rpmsg: process _a... |
687 688 |
static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev, struct rpmsg_hdr *msg, unsigned int len) |
bcabbccab rpmsg: add virtio... |
689 |
{ |
bcabbccab rpmsg: add virtio... |
690 691 |
struct rpmsg_endpoint *ept; struct scatterlist sg; |
bcabbccab rpmsg: add virtio... |
692 |
int err; |
bcabbccab rpmsg: add virtio... |
693 694 |
dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d ", |
0963679c0 rpmsg: align code... |
695 |
msg->src, msg->dst, msg->len, msg->flags, msg->reserved); |
211e3a93e rpmsg: use dynami... |
696 697 698 699 |
#if defined(CONFIG_DYNAMIC_DEBUG) dynamic_hex_dump("rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1, msg, sizeof(*msg) + msg->len, true); #endif |
bcabbccab rpmsg: add virtio... |
700 |
|
9648224e5 rpmsg: validate i... |
701 702 703 704 705 |
/* * We currently use fixed-sized buffers, so trivially sanitize * the reported payload length. */ if (len > RPMSG_BUF_SIZE || |
0963679c0 rpmsg: align code... |
706 |
msg->len > (len - sizeof(struct rpmsg_hdr))) { |
9648224e5 rpmsg: validate i... |
707 708 |
dev_warn(dev, "inbound msg too big: (%d, %d) ", len, msg->len); |
1aa7d6a5d rpmsg: process _a... |
709 |
return -EINVAL; |
9648224e5 rpmsg: validate i... |
710 |
} |
bcabbccab rpmsg: add virtio... |
711 712 |
/* use the dst addr to fetch the callback of the appropriate user */ mutex_lock(&vrp->endpoints_lock); |
5a081caa0 rpmsg: avoid prem... |
713 |
|
bcabbccab rpmsg: add virtio... |
714 |
ept = idr_find(&vrp->endpoints, msg->dst); |
5a081caa0 rpmsg: avoid prem... |
715 716 717 718 |
/* let's make sure no one deallocates ept while we use it */ if (ept) kref_get(&ept->refcount); |
bcabbccab rpmsg: add virtio... |
719 |
mutex_unlock(&vrp->endpoints_lock); |
15fd943af rpmsg: make sure ... |
720 721 722 |
if (ept) { /* make sure ept->cb doesn't go away while we use it */ mutex_lock(&ept->cb_lock); |
bcabbccab rpmsg: add virtio... |
723 |
|
15fd943af rpmsg: make sure ... |
724 725 726 727 728 729 730 |
if (ept->cb) ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src); mutex_unlock(&ept->cb_lock); /* farewell, ept, we don't need you anymore */ |
5a081caa0 rpmsg: avoid prem... |
731 |
kref_put(&ept->refcount, __ept_release); |
15fd943af rpmsg: make sure ... |
732 |
} else |
8a168ca70 treewide: Fix typ... |
733 734 |
dev_warn(dev, "msg received with no recipient "); |
5a081caa0 rpmsg: avoid prem... |
735 |
|
f1d9e9c76 rpmsg: fix publis... |
736 |
/* publish the real size of the buffer */ |
b2e994334 MLK-13887: rpmsg:... |
737 738 739 740 741 742 |
err = sg_init_one_full(&sg, msg, RPMSG_BUF_SIZE); if (err) { dev_err(dev, "rpmsg_recv_done sg_init failed: %d ", err); return err; } |
bcabbccab rpmsg: add virtio... |
743 744 |
/* add the buffer back to the remote processor's virtqueue */ |
cee51d69a virtio_rpmsg_bus:... |
745 |
err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, msg, GFP_KERNEL); |
bcabbccab rpmsg: add virtio... |
746 747 748 |
if (err < 0) { dev_err(dev, "failed to add a virtqueue buffer: %d ", err); |
1aa7d6a5d rpmsg: process _a... |
749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 |
return err; } return 0; } /* called when an rx buffer is used, and it's time to digest a message */ static void rpmsg_recv_done(struct virtqueue *rvq) { struct virtproc_info *vrp = rvq->vdev->priv; struct device *dev = &rvq->vdev->dev; struct rpmsg_hdr *msg; unsigned int len, msgs_received = 0; int err; msg = virtqueue_get_buf(rvq, &len); if (!msg) { dev_err(dev, "uhm, incoming signal, but no used buffer ? "); |
bcabbccab rpmsg: add virtio... |
768 769 |
return; } |
1aa7d6a5d rpmsg: process _a... |
770 771 772 773 774 775 776 777 |
while (msg) { err = rpmsg_recv_single(vrp, dev, msg, len); if (err) break; msgs_received++; msg = virtqueue_get_buf(rvq, &len); |
6c49fbe36 rpmsg: virtio_rpm... |
778 |
} |
1aa7d6a5d rpmsg: process _a... |
779 780 781 |
dev_dbg(dev, "Received %u messages ", msgs_received); |
bcabbccab rpmsg: add virtio... |
782 |
/* tell the remote processor we added another available rx buffer */ |
1aa7d6a5d rpmsg: process _a... |
783 784 |
if (msgs_received) virtqueue_kick(vrp->rvq); |
bcabbccab rpmsg: add virtio... |
785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 |
} /* * This is invoked whenever the remote processor completed processing * a TX msg we just sent it, and the buffer is put back to the used ring. * * Normally, though, we suppress this "tx complete" interrupt in order to * avoid the incurred overhead. */ static void rpmsg_xmit_done(struct virtqueue *svq) { struct virtproc_info *vrp = svq->vdev->priv; dev_dbg(&svq->vdev->dev, "%s ", __func__); /* wake up potential senders that are waiting for a tx buffer */ wake_up_interruptible(&vrp->sendq); } /* invoked when a name service announcement arrives */ |
4b83c52a2 rpmsg: Allow call... |
806 807 |
static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len, void *priv, u32 src) |
bcabbccab rpmsg: add virtio... |
808 809 |
{ struct rpmsg_ns_msg *msg = data; |
92e1de51b rpmsg: Clean up r... |
810 |
struct rpmsg_device *newch; |
bcabbccab rpmsg: add virtio... |
811 812 813 814 |
struct rpmsg_channel_info chinfo; struct virtproc_info *vrp = priv; struct device *dev = &vrp->vdev->dev; int ret; |
211e3a93e rpmsg: use dynami... |
815 816 817 818 |
#if defined(CONFIG_DYNAMIC_DEBUG) dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1, data, len, true); #endif |
bcabbccab rpmsg: add virtio... |
819 820 821 822 |
if (len != sizeof(*msg)) { dev_err(dev, "malformed ns msg (%d) ", len); |
4b83c52a2 rpmsg: Allow call... |
823 |
return -EINVAL; |
bcabbccab rpmsg: add virtio... |
824 825 826 827 828 829 830 831 832 833 834 |
} /* * the name service ept does _not_ belong to a real rpmsg channel, * and is handled by the rpmsg bus itself. * for sanity reasons, make sure a valid rpdev has _not_ sneaked * in somehow. */ if (rpdev) { dev_err(dev, "anomaly: ns ept has an rpdev handle "); |
4b83c52a2 rpmsg: Allow call... |
835 |
return -EINVAL; |
bcabbccab rpmsg: add virtio... |
836 837 838 839 840 841 842 |
} /* don't trust the remote processor for null terminating the name */ msg->name[RPMSG_NAME_SIZE - 1] = '\0'; dev_info(dev, "%sing channel %s addr 0x%x ", |
0963679c0 rpmsg: align code... |
843 844 |
msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat", msg->name, msg->addr); |
bcabbccab rpmsg: add virtio... |
845 846 847 848 849 850 |
strncpy(chinfo.name, msg->name, sizeof(chinfo.name)); chinfo.src = RPMSG_ADDR_ANY; chinfo.dst = msg->addr; if (msg->flags & RPMSG_NS_DESTROY) { |
5e619b486 rpmsg: Split rpms... |
851 |
ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo); |
bcabbccab rpmsg: add virtio... |
852 853 854 855 856 857 858 859 860 |
if (ret) dev_err(dev, "rpmsg_destroy_channel failed: %d ", ret); } else { newch = rpmsg_create_channel(vrp, &chinfo); if (!newch) dev_err(dev, "rpmsg_create_channel failed "); } |
4b83c52a2 rpmsg: Allow call... |
861 862 |
return 0; |
bcabbccab rpmsg: add virtio... |
863 864 865 866 867 |
} static int rpmsg_probe(struct virtio_device *vdev) { vq_callback_t *vq_cbs[] = { rpmsg_recv_done, rpmsg_xmit_done }; |
f7ad26ff9 virtio: make find... |
868 |
static const char * const names[] = { "input", "output" }; |
bcabbccab rpmsg: add virtio... |
869 870 871 872 |
struct virtqueue *vqs[2]; struct virtproc_info *vrp; void *bufs_va; int err = 0, i; |
b1b989144 rpmsg: use less b... |
873 |
size_t total_buf_space; |
71e4b8bf0 virtio_rpmsg: set... |
874 |
bool notify; |
bcabbccab rpmsg: add virtio... |
875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 |
vrp = kzalloc(sizeof(*vrp), GFP_KERNEL); if (!vrp) return -ENOMEM; vrp->vdev = vdev; idr_init(&vrp->endpoints); mutex_init(&vrp->endpoints_lock); mutex_init(&vrp->tx_lock); init_waitqueue_head(&vrp->sendq); /* We expect two virtqueues, rx and tx (and in this order) */ err = vdev->config->find_vqs(vdev, 2, vqs, vq_cbs, names); if (err) goto free_vrp; vrp->rvq = vqs[0]; vrp->svq = vqs[1]; |
b1b989144 rpmsg: use less b... |
894 895 896 897 898 899 900 901 902 903 904 |
/* we expect symmetric tx/rx vrings */ WARN_ON(virtqueue_get_vring_size(vrp->rvq) != virtqueue_get_vring_size(vrp->svq)); /* we need less buffers if vrings are small */ if (virtqueue_get_vring_size(vrp->rvq) < MAX_RPMSG_NUM_BUFS / 2) vrp->num_bufs = virtqueue_get_vring_size(vrp->rvq) * 2; else vrp->num_bufs = MAX_RPMSG_NUM_BUFS; total_buf_space = vrp->num_bufs * RPMSG_BUF_SIZE; |
bcabbccab rpmsg: add virtio... |
905 |
/* allocate coherent memory for the buffers */ |
b5ab5e24e remoteproc: maint... |
906 |
bufs_va = dma_alloc_coherent(vdev->dev.parent->parent, |
b1b989144 rpmsg: use less b... |
907 908 |
total_buf_space, &vrp->bufs_dma, GFP_KERNEL); |
3119b487e drivers/rpmsg/vir... |
909 910 |
if (!bufs_va) { err = -ENOMEM; |
bcabbccab rpmsg: add virtio... |
911 |
goto vqs_del; |
3119b487e drivers/rpmsg/vir... |
912 |
} |
bcabbccab rpmsg: add virtio... |
913 |
|
8d95b322b rpmsg: use proper... |
914 915 916 |
dev_dbg(&vdev->dev, "buffers: va %p, dma %pad ", bufs_va, &vrp->bufs_dma); |
bcabbccab rpmsg: add virtio... |
917 918 919 920 921 |
/* half of the buffers is dedicated for RX */ vrp->rbufs = bufs_va; /* and half is dedicated for TX */ |
b1b989144 rpmsg: use less b... |
922 |
vrp->sbufs = bufs_va + total_buf_space / 2; |
bcabbccab rpmsg: add virtio... |
923 924 |
/* set up the receive buffers */ |
b1b989144 rpmsg: use less b... |
925 |
for (i = 0; i < vrp->num_bufs / 2; i++) { |
bcabbccab rpmsg: add virtio... |
926 927 |
struct scatterlist sg; void *cpu_addr = vrp->rbufs + i * RPMSG_BUF_SIZE; |
b2e994334 MLK-13887: rpmsg:... |
928 929 930 931 932 933 |
err = sg_init_one_full(&sg, cpu_addr, RPMSG_BUF_SIZE); if (err) { dev_err(&vdev->dev, "rpmsg_probe sg_init failed. "); return err; } |
bcabbccab rpmsg: add virtio... |
934 |
|
cee51d69a virtio_rpmsg_bus:... |
935 |
err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, cpu_addr, |
0963679c0 rpmsg: align code... |
936 |
GFP_KERNEL); |
57e1a3734 virtio: rpmsg: ma... |
937 |
WARN_ON(err); /* sanity check; this can't really happen */ |
bcabbccab rpmsg: add virtio... |
938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 |
} /* suppress "tx-complete" interrupts */ virtqueue_disable_cb(vrp->svq); vdev->priv = vrp; /* if supported by the remote processor, enable the name service */ if (virtio_has_feature(vdev, VIRTIO_RPMSG_F_NS)) { /* a dedicated endpoint handles the name service msgs */ vrp->ns_ept = __rpmsg_create_ept(vrp, NULL, rpmsg_ns_cb, vrp, RPMSG_NS_ADDR); if (!vrp->ns_ept) { dev_err(&vdev->dev, "failed to create the ns ept "); err = -ENOMEM; goto free_coherent; } } |
71e4b8bf0 virtio_rpmsg: set... |
957 958 959 960 961 962 963 964 |
/* * Prepare to kick but don't notify yet - we can't do this before * device is ready. */ notify = virtqueue_kick_prepare(vrp->rvq); /* From this point on, we can notify and get callbacks. */ virtio_device_ready(vdev); |
bcabbccab rpmsg: add virtio... |
965 |
/* tell the remote processor it can start sending messages */ |
71e4b8bf0 virtio_rpmsg: set... |
966 967 968 969 970 971 |
/* * this might be concurrent with callbacks, but we are only * doing notify, not a full kick here, so that's ok. */ if (notify) virtqueue_notify(vrp->rvq); |
bcabbccab rpmsg: add virtio... |
972 973 974 975 976 977 978 |
dev_info(&vdev->dev, "rpmsg host is online "); return 0; free_coherent: |
b1b989144 rpmsg: use less b... |
979 980 |
dma_free_coherent(vdev->dev.parent->parent, total_buf_space, bufs_va, vrp->bufs_dma); |
bcabbccab rpmsg: add virtio... |
981 982 983 984 985 986 987 988 989 990 991 992 993 |
vqs_del: vdev->config->del_vqs(vrp->vdev); free_vrp: kfree(vrp); return err; } static int rpmsg_remove_device(struct device *dev, void *data) { device_unregister(dev); return 0; } |
0fe763c57 Drivers: misc: re... |
994 |
static void rpmsg_remove(struct virtio_device *vdev) |
bcabbccab rpmsg: add virtio... |
995 996 |
{ struct virtproc_info *vrp = vdev->priv; |
b1b989144 rpmsg: use less b... |
997 |
size_t total_buf_space = vrp->num_bufs * RPMSG_BUF_SIZE; |
bcabbccab rpmsg: add virtio... |
998 999 1000 1001 1002 1003 1004 1005 |
int ret; vdev->config->reset(vdev); ret = device_for_each_child(&vdev->dev, NULL, rpmsg_remove_device); if (ret) dev_warn(&vdev->dev, "can't remove rpmsg device: %d ", ret); |
fa2d7795b rpmsg: fix name s... |
1006 1007 |
if (vrp->ns_ept) __rpmsg_destroy_ept(vrp, vrp->ns_ept); |
bcabbccab rpmsg: add virtio... |
1008 1009 1010 |
idr_destroy(&vrp->endpoints); vdev->config->del_vqs(vrp->vdev); |
b1b989144 rpmsg: use less b... |
1011 1012 |
dma_free_coherent(vdev->dev.parent->parent, total_buf_space, vrp->rbufs, vrp->bufs_dma); |
bcabbccab rpmsg: add virtio... |
1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 |
kfree(vrp); } static struct virtio_device_id id_table[] = { { VIRTIO_ID_RPMSG, VIRTIO_DEV_ANY_ID }, { 0 }, }; static unsigned int features[] = { VIRTIO_RPMSG_F_NS, }; static struct virtio_driver virtio_ipc_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, .probe = rpmsg_probe, |
0fe763c57 Drivers: misc: re... |
1033 |
.remove = rpmsg_remove, |
bcabbccab rpmsg: add virtio... |
1034 1035 1036 1037 1038 |
}; static int __init rpmsg_init(void) { int ret; |
bcabbccab rpmsg: add virtio... |
1039 |
ret = register_virtio_driver(&virtio_ipc_driver); |
5e619b486 rpmsg: Split rpms... |
1040 |
if (ret) |
bcabbccab rpmsg: add virtio... |
1041 1042 |
pr_err("failed to register virtio driver: %d ", ret); |
bcabbccab rpmsg: add virtio... |
1043 1044 1045 |
return ret; } |
963425261 rpmsg: fix depend... |
1046 |
subsys_initcall(rpmsg_init); |
bcabbccab rpmsg: add virtio... |
1047 1048 1049 1050 |
static void __exit rpmsg_fini(void) { unregister_virtio_driver(&virtio_ipc_driver); |
bcabbccab rpmsg: add virtio... |
1051 1052 1053 1054 1055 1056 |
} module_exit(rpmsg_fini); MODULE_DEVICE_TABLE(virtio, id_table); MODULE_DESCRIPTION("Virtio-based remote processor messaging bus"); MODULE_LICENSE("GPL v2"); |