LINUX ALLOCATED DEVICES (4.x+ version)

  
  This list is the Linux Device List, the official registry of allocated
  device numbers and /dev directory nodes for the Linux operating
  system.

  The LaTeX version of this document is no longer maintained, nor is
  the document that used to reside at lanana.org.  This version in the
  mainline Linux kernel is the master document.  Updates shall be sent
  as patches to the kernel maintainers (see the SubmittingPatches document).
  Specifically explore the sections titled "CHAR and MISC DRIVERS", and
  "BLOCK LAYER" in the MAINTAINERS file to find the right maintainers
  to involve for character and block devices.

  
  This document is included by reference into the Filesystem Hierarchy
  Standard (FHS).	 The FHS is available from http://www.pathname.com/fhs/.
  
  Allocations marked (68k/Amiga) apply to Linux/68k on the Amiga
  platform only.	Allocations marked (68k/Atari) apply to Linux/68k on
  the Atari platform only.

  This document is in the public domain.	The authors requests, however,

  that semantically altered versions are not distributed without

  permission of the authors, assuming the authors can be contacted without

  an unreasonable effort.

  
  	  **** DEVICE DRIVERS AUTHORS PLEASE READ THIS ****

  Linux now has extensive support for dynamic allocation of device numbering
  and can use sysfs and udev (systemd) to handle the naming needs. There are
  still some exceptions in the serial and boot device area. Before asking
  for a device number make sure you actually need one.

  To have a major number allocated, or a minor number in situations
  where that applies (e.g. busmice), please submit a patch and send to
  the authors as indicated above.

  Keep the description of the device *in the same format
  as this list*.	The reason for this is that it is the only way we have
  found to ensure we have all the requisite information to publish your
  device and avoid conflicts.

  Finally, sometimes we have to play "namespace police."  Please don't be
  offended.  We often get submissions for /dev names that would be bound
  to cause conflicts down the road.  We are trying to avoid getting in a

  situation where we would have to suffer an incompatible forward

  change.  Therefore, please consult with us *before* you make your

  device names and numbers in any way public, at least to the point
  where it would be at all difficult to get them changed.
  
  Your cooperation is appreciated.
  
  
    0		Unnamed devices (e.g. non-device mounts)
  		  0 = reserved as null device number
  		See block major 144, 145, 146 for expansion areas.
  
    1 char	Memory devices
  		  1 = /dev/mem		Physical memory access
  		  2 = /dev/kmem		Kernel virtual memory access
  		  3 = /dev/null		Null device
  		  4 = /dev/port		I/O port access
  		  5 = /dev/zero		Null byte source
  		  6 = /dev/core		OBSOLETE - replaced by /proc/kcore
  		  7 = /dev/full		Returns ENOSPC on write
  		  8 = /dev/random	Nondeterministic random number gen.
  		  9 = /dev/urandom	Faster, less secure random number gen.

  		 10 = /dev/aio		Asynchronous I/O notification interface

  		 11 = /dev/kmsg		Writes to this come out as printk's, reads
  					export the buffered printk records.

  		 12 = /dev/oldmem	OBSOLETE - replaced by /proc/vmcore

    1 block	RAM disk
  		  0 = /dev/ram0		First RAM disk
  		  1 = /dev/ram1		Second RAM disk
  		    ...

  		250 = /dev/initrd	Initial RAM disk

  
  		Older kernels had /dev/ramdisk (1, 1) here.
  		/dev/initrd refers to a RAM disk which was preloaded
  		by the boot loader; newer kernels use /dev/ram0 for
  		the initrd.
  
    2 char	Pseudo-TTY masters
  		  0 = /dev/ptyp0	First PTY master
  		  1 = /dev/ptyp1	Second PTY master
  		    ...
  		255 = /dev/ptyef	256th PTY master
  
  		Pseudo-tty's are named as follows:
  		* Masters are "pty", slaves are "tty";
  		* the fourth letter is one of pqrstuvwxyzabcde indicating
  		  the 1st through 16th series of 16 pseudo-ttys each, and
  		* the fifth letter is one of 0123456789abcdef indicating
  		  the position within the series.
  
  		These are the old-style (BSD) PTY devices; Unix98
  		devices are on major 128 and above and use the PTY
  		master multiplex (/dev/ptmx) to acquire a PTY on
  		demand.

    2 block	Floppy disks
  		  0 = /dev/fd0		Controller 0, drive 0, autodetect
  		  1 = /dev/fd1		Controller 0, drive 1, autodetect
  		  2 = /dev/fd2		Controller 0, drive 2, autodetect
  		  3 = /dev/fd3		Controller 0, drive 3, autodetect
  		128 = /dev/fd4		Controller 1, drive 0, autodetect
  		129 = /dev/fd5		Controller 1, drive 1, autodetect
  		130 = /dev/fd6		Controller 1, drive 2, autodetect
  		131 = /dev/fd7		Controller 1, drive 3, autodetect
  
  		To specify format, add to the autodetect device number:
  		  0 = /dev/fd?		Autodetect format
  		  4 = /dev/fd?d360	5.25"  360K in a 360K  drive(1)
  		 20 = /dev/fd?h360	5.25"  360K in a 1200K drive(1)
  		 48 = /dev/fd?h410	5.25"  410K in a 1200K drive
  		 64 = /dev/fd?h420	5.25"  420K in a 1200K drive
  		 24 = /dev/fd?h720	5.25"  720K in a 1200K drive
  		 80 = /dev/fd?h880	5.25"  880K in a 1200K drive(1)
  		  8 = /dev/fd?h1200	5.25" 1200K in a 1200K drive(1)
  		 40 = /dev/fd?h1440	5.25" 1440K in a 1200K drive(1)
  		 56 = /dev/fd?h1476	5.25" 1476K in a 1200K drive
  		 72 = /dev/fd?h1494	5.25" 1494K in a 1200K drive
  		 92 = /dev/fd?h1600	5.25" 1600K in a 1200K drive(1)
  
  		 12 = /dev/fd?u360	3.5"   360K Double Density(2)
  		 16 = /dev/fd?u720	3.5"   720K Double Density(1)
  		120 = /dev/fd?u800	3.5"   800K Double Density(2)
  		 52 = /dev/fd?u820	3.5"   820K Double Density
  		 68 = /dev/fd?u830	3.5"   830K Double Density
  		 84 = /dev/fd?u1040	3.5"  1040K Double Density(1)
  		 88 = /dev/fd?u1120	3.5"  1120K Double Density(1)
  		 28 = /dev/fd?u1440	3.5"  1440K High Density(1)
  		124 = /dev/fd?u1600	3.5"  1600K High Density(1)
  		 44 = /dev/fd?u1680	3.5"  1680K High Density(3)
  		 60 = /dev/fd?u1722	3.5"  1722K High Density
  		 76 = /dev/fd?u1743	3.5"  1743K High Density
  		 96 = /dev/fd?u1760	3.5"  1760K High Density
  		116 = /dev/fd?u1840	3.5"  1840K High Density(3)
  		100 = /dev/fd?u1920	3.5"  1920K High Density(1)
  		 32 = /dev/fd?u2880	3.5"  2880K Extra Density(1)
  		104 = /dev/fd?u3200	3.5"  3200K Extra Density
  		108 = /dev/fd?u3520	3.5"  3520K Extra Density
  		112 = /dev/fd?u3840	3.5"  3840K Extra Density(1)
  
  		 36 = /dev/fd?CompaQ	Compaq 2880K drive; obsolete?
  
  		(1) Autodetectable format
  		(2) Autodetectable format in a Double Density (720K) drive only
  		(3) Autodetectable format in a High Density (1440K) drive only
  
  		NOTE: The letter in the device name (d, q, h or u)
  		signifies the type of drive: 5.25" Double Density (d),
  		5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
  		(any model, u).	 The use of the capital letters D, H
  		and E for the 3.5" models have been deprecated, since
  		the drive type is insignificant for these devices.
  
    3 char	Pseudo-TTY slaves
  		  0 = /dev/ttyp0	First PTY slave
  		  1 = /dev/ttyp1	Second PTY slave
  		    ...
  		255 = /dev/ttyef	256th PTY slave
  
  		These are the old-style (BSD) PTY devices; Unix98
  		devices are on major 136 and above.
  
    3 block	First MFM, RLL and IDE hard disk/CD-ROM interface
  		  0 = /dev/hda		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdb		Slave: whole disk (or CD-ROM)
  
  		For partitions, add to the whole disk device number:
  		  0 = /dev/hd?		Whole disk
  		  1 = /dev/hd?1		First partition
  		  2 = /dev/hd?2		Second partition
  		    ...
  		 63 = /dev/hd?63	63rd partition
  
  		For Linux/i386, partitions 1-4 are the primary
  		partitions, and 5 and above are logical partitions.
  		Other versions of Linux use partitioning schemes
  		appropriate to their respective architectures.
  
    4 char	TTY devices
  		  0 = /dev/tty0		Current virtual console
  
  		  1 = /dev/tty1		First virtual console
  		    ...
  		 63 = /dev/tty63	63rd virtual console
  		 64 = /dev/ttyS0	First UART serial port
  		    ...
  		255 = /dev/ttyS191	192nd UART serial port
  
  		UART serial ports refer to 8250/16450/16550 series devices.
  
  		Older versions of the Linux kernel used this major
  		number for BSD PTY devices.  As of Linux 2.1.115, this
  		is no longer supported.	 Use major numbers 2 and 3.
  
    4 block	Aliases for dynamically allocated major devices to be used
  		when its not possible to create the real device nodes
  		because the root filesystem is mounted read-only.
  
                    0 = /dev/root
  
    5 char	Alternate TTY devices
  		  0 = /dev/tty		Current TTY device
  		  1 = /dev/console	System console
  		  2 = /dev/ptmx		PTY master multiplex

  		  3 = /dev/ttyprintk	User messages via printk TTY device

  		 64 = /dev/cua0		Callout device for ttyS0
  		    ...
  		255 = /dev/cua191	Callout device for ttyS191
  
  		(5,1) is /dev/console starting with Linux 2.1.71.  See
  		the section on terminal devices for more information
  		on /dev/console.
  
    6 char	Parallel printer devices
  		  0 = /dev/lp0		Parallel printer on parport0
  		  1 = /dev/lp1		Parallel printer on parport1
  		    ...
  
  		Current Linux kernels no longer have a fixed mapping
  		between parallel ports and I/O addresses.  Instead,
  		they are redirected through the parport multiplex layer.
  
    7 char	Virtual console capture devices
  		  0 = /dev/vcs		Current vc text contents
  		  1 = /dev/vcs1		tty1 text contents
  		    ...
  		 63 = /dev/vcs63	tty63 text contents
  		128 = /dev/vcsa		Current vc text/attribute contents
  		129 = /dev/vcsa1	tty1 text/attribute contents
  		    ...
  		191 = /dev/vcsa63	tty63 text/attribute contents

  		NOTE: These devices permit both read and write access.
  
    7 block	Loopback devices

  		  0 = /dev/loop0	First loop device
  		  1 = /dev/loop1	Second loop device

  		    ...

  		The loop devices are used to mount filesystems not

  		associated with block devices.	The binding to the

  		loop devices is handled by mount(8) or losetup(8).

  
    8 block	SCSI disk devices (0-15)
  		  0 = /dev/sda		First SCSI disk whole disk
  		 16 = /dev/sdb		Second SCSI disk whole disk
  		 32 = /dev/sdc		Third SCSI disk whole disk
  		    ...
  		240 = /dev/sdp		Sixteenth SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
    9 char	SCSI tape devices
  		  0 = /dev/st0		First SCSI tape, mode 0
  		  1 = /dev/st1		Second SCSI tape, mode 0
  		    ...
  		 32 = /dev/st0l		First SCSI tape, mode 1
  		 33 = /dev/st1l		Second SCSI tape, mode 1
  		    ...
  		 64 = /dev/st0m		First SCSI tape, mode 2
  		 65 = /dev/st1m		Second SCSI tape, mode 2
  		    ...
  		 96 = /dev/st0a		First SCSI tape, mode 3
  		 97 = /dev/st1a		Second SCSI tape, mode 3
  		      ...
  		128 = /dev/nst0		First SCSI tape, mode 0, no rewind
  		129 = /dev/nst1		Second SCSI tape, mode 0, no rewind
  		    ...
  		160 = /dev/nst0l	First SCSI tape, mode 1, no rewind
  		161 = /dev/nst1l	Second SCSI tape, mode 1, no rewind
  		    ...
  		192 = /dev/nst0m	First SCSI tape, mode 2, no rewind
  		193 = /dev/nst1m	Second SCSI tape, mode 2, no rewind
  		    ...
  		224 = /dev/nst0a	First SCSI tape, mode 3, no rewind
  		225 = /dev/nst1a	Second SCSI tape, mode 3, no rewind
  		    ...
  
  		"No rewind" refers to the omission of the default
  		automatic rewind on device close.  The MTREW or MTOFFL
  		ioctl()'s can be used to rewind the tape regardless of
  		the device used to access it.
  
    9 block	Metadisk (RAID) devices
  		  0 = /dev/md0		First metadisk group
  		  1 = /dev/md1		Second metadisk group
  		    ...
  
  		The metadisk driver is used to span a
  		filesystem across multiple physical disks.
  
   10 char	Non-serial mice, misc features
  		  0 = /dev/logibm	Logitech bus mouse
  		  1 = /dev/psaux	PS/2-style mouse port
  		  2 = /dev/inportbm	Microsoft Inport bus mouse
  		  3 = /dev/atibm	ATI XL bus mouse
  		  4 = /dev/jbm		J-mouse
  		  4 = /dev/amigamouse	Amiga mouse (68k/Amiga)
  		  5 = /dev/atarimouse	Atari mouse
  		  6 = /dev/sunmouse	Sun mouse
  		  7 = /dev/amigamouse1	Second Amiga mouse
  		  8 = /dev/smouse	Simple serial mouse driver
  		  9 = /dev/pc110pad	IBM PC-110 digitizer pad
  		 10 = /dev/adbmouse	Apple Desktop Bus mouse
  		 11 = /dev/vrtpanel	Vr41xx embedded touch panel
  		 13 = /dev/vpcmouse	Connectix Virtual PC Mouse
  		 14 = /dev/touchscreen/ucb1x00  UCB 1x00 touchscreen
  		 15 = /dev/touchscreen/mk712	MK712 touchscreen
  		128 = /dev/beep		Fancy beep device

  		129 =

  		130 = /dev/watchdog	Watchdog timer port
  		131 = /dev/temperature	Machine internal temperature
  		132 = /dev/hwtrap	Hardware fault trap
  		133 = /dev/exttrp	External device trap
  		134 = /dev/apm_bios	Advanced Power Management BIOS
  		135 = /dev/rtc		Real Time Clock

  		137 = /dev/vhci		Bluetooth virtual HCI driver

  		139 = /dev/openprom	SPARC OpenBoot PROM
  		140 = /dev/relay8	Berkshire Products Octal relay card
  		141 = /dev/relay16	Berkshire Products ISO-16 relay card

  		142 =

  		143 = /dev/pciconf	PCI configuration space
  		144 = /dev/nvram	Non-volatile configuration RAM

  		145 = /dev/hfmodem	Soundcard shortwave modem control

  		146 = /dev/graphics	Linux/SGI graphics device
  		147 = /dev/opengl	Linux/SGI OpenGL pipe
  		148 = /dev/gfx		Linux/SGI graphics effects device
  		149 = /dev/input/mouse	Linux/SGI Irix emulation mouse
  		150 = /dev/input/keyboard Linux/SGI Irix emulation keyboard
  		151 = /dev/led		Front panel LEDs
  		152 = /dev/kpoll	Kernel Poll Driver
  		153 = /dev/mergemem	Memory merge device
  		154 = /dev/pmu		Macintosh PowerBook power manager
  		155 = /dev/isictl	MultiTech ISICom serial control
  		156 = /dev/lcd		Front panel LCD display
  		157 = /dev/ac		Applicom Intl Profibus card
  		158 = /dev/nwbutton	Netwinder external button
  		159 = /dev/nwdebug	Netwinder debug interface
  		160 = /dev/nwflash	Netwinder flash memory
  		161 = /dev/userdma	User-space DMA access
  		162 = /dev/smbus	System Management Bus
  		163 = /dev/lik		Logitech Internet Keyboard
  		164 = /dev/ipmo		Intel Intelligent Platform Management

  		165 = /dev/vmmon	VMware virtual machine monitor

  		166 = /dev/i2o/ctl	I2O configuration manager
  		167 = /dev/specialix_sxctl Specialix serial control
  		168 = /dev/tcldrv	Technology Concepts serial control
  		169 = /dev/specialix_rioctl Specialix RIO serial control
  		170 = /dev/thinkpad/thinkpad	IBM Thinkpad devices
  		171 = /dev/srripc	QNX4 API IPC manager
  		172 = /dev/usemaclone	Semaphore clone device
  		173 = /dev/ipmikcs	Intelligent Platform Management
  		174 = /dev/uctrl	SPARCbook 3 microcontroller
  		175 = /dev/agpgart	AGP Graphics Address Remapping Table
  		176 = /dev/gtrsc	Gorgy Timing radio clock
  		177 = /dev/cbm		Serial CBM bus
  		178 = /dev/jsflash	JavaStation OS flash SIMM
  		179 = /dev/xsvc		High-speed shared-mem/semaphore service
  		180 = /dev/vrbuttons	Vr41xx button input device
  		181 = /dev/toshiba	Toshiba laptop SMM support
  		182 = /dev/perfctr	Performance-monitoring counters
  		183 = /dev/hwrng	Generic random number generator
  		184 = /dev/cpu/microcode CPU microcode update interface
  		186 = /dev/atomicps	Atomic shapshot of process state data
  		187 = /dev/irnet	IrNET device
  		188 = /dev/smbusbios	SMBus BIOS
  		189 = /dev/ussp_ctl	User space serial port control
  		190 = /dev/crash	Mission Critical Linux crash dump facility
  		191 = /dev/pcl181	<information missing>
  		192 = /dev/nas_xbus	NAS xbus LCD/buttons access
  		193 = /dev/d7s		SPARC 7-segment display
  		194 = /dev/zkshim	Zero-Knowledge network shim control
  		195 = /dev/elographics/e2201	Elographics touchscreen E271-2201

  		196 = /dev/vfio/vfio	VFIO userspace driver interface

  		197 = /dev/pxa3xx-gcu	PXA3xx graphics controller unit driver

  		198 = /dev/sexec	Signed executable interface
  		199 = /dev/scanners/cuecat :CueCat barcode scanner
  		200 = /dev/net/tun	TAP/TUN network device
  		201 = /dev/button/gulpb	Transmeta GULP-B buttons
  		202 = /dev/emd/ctl	Enhanced Metadisk RAID (EMD) control

  		203 = /dev/cuse		Cuse (character device in user-space)

  		204 = /dev/video/em8300		EM8300 DVD decoder control
  		205 = /dev/video/em8300_mv	EM8300 DVD decoder video
  		206 = /dev/video/em8300_ma	EM8300 DVD decoder audio
  		207 = /dev/video/em8300_sp	EM8300 DVD decoder subpicture
  		208 = /dev/compaq/cpqphpc	Compaq PCI Hot Plug Controller
  		209 = /dev/compaq/cpqrid	Compaq Remote Insight Driver

  		210 = /dev/impi/bt	IMPI coprocessor block transfer

  		211 = /dev/impi/smic	IMPI coprocessor stream interface
  		212 = /dev/watchdogs/0	First watchdog device
  		213 = /dev/watchdogs/1	Second watchdog device
  		214 = /dev/watchdogs/2	Third watchdog device
  		215 = /dev/watchdogs/3	Fourth watchdog device
  		216 = /dev/fujitsu/apanel	Fujitsu/Siemens application panel
  		217 = /dev/ni/natmotn		National Instruments Motion
  		218 = /dev/kchuid	Inter-process chuid control
  		219 = /dev/modems/mwave	MWave modem firmware upload
  		220 = /dev/mptctl	Message passing technology (MPT) control
  		221 = /dev/mvista/hssdsi	Montavista PICMG hot swap system driver
  		222 = /dev/mvista/hasi		Montavista PICMG high availability
  		223 = /dev/input/uinput		User level driver support for input
  		224 = /dev/tpm		TCPA TPM driver
  		225 = /dev/pps		Pulse Per Second driver
  		226 = /dev/systrace	Systrace device
  		227 = /dev/mcelog	X86_64 Machine Check Exception driver
  		228 = /dev/hpet		HPET driver
  		229 = /dev/fuse		Fuse (virtual filesystem in user-space)
  		230 = /dev/midishare	MidiShare driver

  		231 = /dev/snapshot	System memory snapshot device
  		232 = /dev/kvm		Kernel-based virtual machine (hardware virtualization extensions)
  		233 = /dev/kmview	View-OS A process with a view

  		234 = /dev/btrfs-control	Btrfs control device
  		235 = /dev/autofs	Autofs control device

  		236 = /dev/mapper/control	Device-Mapper control device

  		237 = /dev/loop-control Loopback control device
  		238 = /dev/vhost-net	Host kernel accelerator for virtio net

  		239 = /dev/uhid		User-space I/O driver support for HID subsystem

  		240-254			Reserved for local use
  		255			Reserved for MISC_DYNAMIC_MINOR
  
   11 char	Raw keyboard device	(Linux/SPARC only)
  		  0 = /dev/kbd		Raw keyboard device
  
   11 char	Serial Mux device	(Linux/PA-RISC only)
  		  0 = /dev/ttyB0	First mux port
  		  1 = /dev/ttyB1	Second mux port
  		    ...
  
   11 block	SCSI CD-ROM devices
  		  0 = /dev/scd0		First SCSI CD-ROM
  		  1 = /dev/scd1		Second SCSI CD-ROM
  		    ...
  
  		The prefix /dev/sr (instead of /dev/scd) has been deprecated.
  
   12 char	QIC-02 tape
  		  2 = /dev/ntpqic11	QIC-11, no rewind-on-close
  		  3 = /dev/tpqic11	QIC-11, rewind-on-close
  		  4 = /dev/ntpqic24	QIC-24, no rewind-on-close
  		  5 = /dev/tpqic24	QIC-24, rewind-on-close
  		  6 = /dev/ntpqic120	QIC-120, no rewind-on-close
  		  7 = /dev/tpqic120	QIC-120, rewind-on-close
  		  8 = /dev/ntpqic150	QIC-150, no rewind-on-close
  		  9 = /dev/tpqic150	QIC-150, rewind-on-close
  
  		The device names specified are proposed -- if there
  		are "standard" names for these devices, please let me know.

   12 block

  
   13 char	Input core
  		  0 = /dev/input/js0	First joystick
  		  1 = /dev/input/js1	Second joystick
  		    ...
  		 32 = /dev/input/mouse0	First mouse
  		 33 = /dev/input/mouse1	Second mouse
  		    ...
  		 63 = /dev/input/mice	Unified mouse
  		 64 = /dev/input/event0	First event queue
  		 65 = /dev/input/event1	Second event queue
  		    ...
  
  		Each device type has 5 bits (32 minors).

   13 block	Previously used for the XT disk (/dev/xdN)
  		Deleted in kernel v3.9.

  
   14 char	Open Sound System (OSS)
  		  0 = /dev/mixer	Mixer control
  		  1 = /dev/sequencer	Audio sequencer
  		  2 = /dev/midi00	First MIDI port
  		  3 = /dev/dsp		Digital audio
  		  4 = /dev/audio	Sun-compatible digital audio

  		  6 =

  		  7 = /dev/audioctl	SPARC audio control device
  		  8 = /dev/sequencer2	Sequencer -- alternate device
  		 16 = /dev/mixer1	Second soundcard mixer control
  		 17 = /dev/patmgr0	Sequencer patch manager
  		 18 = /dev/midi01	Second MIDI port
  		 19 = /dev/dsp1		Second soundcard digital audio
  		 20 = /dev/audio1	Second soundcard Sun digital audio
  		 33 = /dev/patmgr1	Sequencer patch manager
  		 34 = /dev/midi02	Third MIDI port
  		 50 = /dev/midi03	Fourth MIDI port

   14 block

  
   15 char	Joystick
  		  0 = /dev/js0		First analog joystick
  		  1 = /dev/js1		Second analog joystick
  		    ...
  		128 = /dev/djs0		First digital joystick
  		129 = /dev/djs1		Second digital joystick
  		    ...
   15 block	Sony CDU-31A/CDU-33A CD-ROM
  		  0 = /dev/sonycd	Sony CDU-31a CD-ROM
  
   16 char	Non-SCSI scanners
  		  0 = /dev/gs4500	Genius 4500 handheld scanner

   16 block	GoldStar CD-ROM
  		  0 = /dev/gscd		GoldStar CD-ROM

   17 char	OBSOLETE (was Chase serial card)

  		  0 = /dev/ttyH0	First Chase port
  		  1 = /dev/ttyH1	Second Chase port
  		    ...
   17 block	Optics Storage CD-ROM
  		  0 = /dev/optcd	Optics Storage CD-ROM

   18 char	OBSOLETE (was Chase serial card - alternate devices)

  		  0 = /dev/cuh0		Callout device for ttyH0
  		  1 = /dev/cuh1		Callout device for ttyH1
  		    ...
   18 block	Sanyo CD-ROM
  		  0 = /dev/sjcd		Sanyo CD-ROM
  
   19 char	Cyclades serial card
  		  0 = /dev/ttyC0	First Cyclades port
  		    ...
  		 31 = /dev/ttyC31	32nd Cyclades port

   19 block	"Double" compressed disk
  		  0 = /dev/double0	First compressed disk
  		    ...
  		  7 = /dev/double7	Eighth compressed disk
  		128 = /dev/cdouble0	Mirror of first compressed disk
  		    ...
  		135 = /dev/cdouble7	Mirror of eighth compressed disk
  
  		See the Double documentation for the meaning of the
  		mirror devices.
  
   20 char	Cyclades serial card - alternate devices
  		  0 = /dev/cub0		Callout device for ttyC0
  		    ...
  		 31 = /dev/cub31	Callout device for ttyC31

   20 block	Hitachi CD-ROM (under development)
  		  0 = /dev/hitcd	Hitachi CD-ROM
  
   21 char	Generic SCSI access
  		  0 = /dev/sg0		First generic SCSI device
  		  1 = /dev/sg1		Second generic SCSI device
  		    ...
  
  		Most distributions name these /dev/sga, /dev/sgb...;
  		this sets an unnecessary limit of 26 SCSI devices in
  		the system and is counter to standard Linux
  		device-naming practice.
  
   21 block	Acorn MFM hard drive interface
  		  0 = /dev/mfma		First MFM drive whole disk
  		 64 = /dev/mfmb		Second MFM drive whole disk
  
  		This device is used on the ARM-based Acorn RiscPC.
  		Partitions are handled the same way as for IDE disks

  		(see major number 3).

  
   22 char	Digiboard serial card
  		  0 = /dev/ttyD0	First Digiboard port
  		  1 = /dev/ttyD1	Second Digiboard port
  		    ...
   22 block	Second IDE hard disk/CD-ROM interface
  		  0 = /dev/hdc		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdd		Slave: whole disk (or CD-ROM)

  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   23 char	Digiboard serial card - alternate devices
  		  0 = /dev/cud0		Callout device for ttyD0
  		  1 = /dev/cud1		Callout device for ttyD1
  		      ...
   23 block	Mitsumi proprietary CD-ROM
  		  0 = /dev/mcd		Mitsumi CD-ROM
  
   24 char	Stallion serial card
  		  0 = /dev/ttyE0	Stallion port 0 card 0
  		  1 = /dev/ttyE1	Stallion port 1 card 0
  		    ...
  		 64 = /dev/ttyE64	Stallion port 0 card 1
  		 65 = /dev/ttyE65	Stallion port 1 card 1
  		      ...
  		128 = /dev/ttyE128	Stallion port 0 card 2
  		129 = /dev/ttyE129	Stallion port 1 card 2
  		    ...
  		192 = /dev/ttyE192	Stallion port 0 card 3
  		193 = /dev/ttyE193	Stallion port 1 card 3
  		    ...
   24 block	Sony CDU-535 CD-ROM
  		  0 = /dev/cdu535	Sony CDU-535 CD-ROM
  
   25 char	Stallion serial card - alternate devices
  		  0 = /dev/cue0		Callout device for ttyE0
  		  1 = /dev/cue1		Callout device for ttyE1
  		    ...
  		 64 = /dev/cue64	Callout device for ttyE64
  		 65 = /dev/cue65	Callout device for ttyE65
  		    ...
  		128 = /dev/cue128	Callout device for ttyE128
  		129 = /dev/cue129	Callout device for ttyE129
  		    ...
  		192 = /dev/cue192	Callout device for ttyE192
  		193 = /dev/cue193	Callout device for ttyE193
  		      ...
   25 block	First Matsushita (Panasonic/SoundBlaster) CD-ROM
  		  0 = /dev/sbpcd0	Panasonic CD-ROM controller 0 unit 0
  		  1 = /dev/sbpcd1	Panasonic CD-ROM controller 0 unit 1
  		  2 = /dev/sbpcd2	Panasonic CD-ROM controller 0 unit 2
  		  3 = /dev/sbpcd3	Panasonic CD-ROM controller 0 unit 3

   26 char

   26 block	Second Matsushita (Panasonic/SoundBlaster) CD-ROM
  		  0 = /dev/sbpcd4	Panasonic CD-ROM controller 1 unit 0
  		  1 = /dev/sbpcd5	Panasonic CD-ROM controller 1 unit 1
  		  2 = /dev/sbpcd6	Panasonic CD-ROM controller 1 unit 2
  		  3 = /dev/sbpcd7	Panasonic CD-ROM controller 1 unit 3
  
   27 char	QIC-117 tape
  		  0 = /dev/qft0		Unit 0, rewind-on-close
  		  1 = /dev/qft1		Unit 1, rewind-on-close
  		  2 = /dev/qft2		Unit 2, rewind-on-close
  		  3 = /dev/qft3		Unit 3, rewind-on-close
  		  4 = /dev/nqft0	Unit 0, no rewind-on-close
  		  5 = /dev/nqft1	Unit 1, no rewind-on-close
  		  6 = /dev/nqft2	Unit 2, no rewind-on-close
  		  7 = /dev/nqft3	Unit 3, no rewind-on-close
  		 16 = /dev/zqft0	Unit 0, rewind-on-close, compression
  		 17 = /dev/zqft1	Unit 1, rewind-on-close, compression
  		 18 = /dev/zqft2	Unit 2, rewind-on-close, compression
  		 19 = /dev/zqft3	Unit 3, rewind-on-close, compression
  		 20 = /dev/nzqft0	Unit 0, no rewind-on-close, compression
  		 21 = /dev/nzqft1	Unit 1, no rewind-on-close, compression
  		 22 = /dev/nzqft2	Unit 2, no rewind-on-close, compression
  		 23 = /dev/nzqft3	Unit 3, no rewind-on-close, compression
  		 32 = /dev/rawqft0	Unit 0, rewind-on-close, no file marks
  		 33 = /dev/rawqft1	Unit 1, rewind-on-close, no file marks
  		 34 = /dev/rawqft2	Unit 2, rewind-on-close, no file marks
  		 35 = /dev/rawqft3	Unit 3, rewind-on-close, no file marks
  		 36 = /dev/nrawqft0	Unit 0, no rewind-on-close, no file marks
  		 37 = /dev/nrawqft1	Unit 1, no rewind-on-close, no file marks
  		 38 = /dev/nrawqft2	Unit 2, no rewind-on-close, no file marks
  		 39 = /dev/nrawqft3	Unit 3, no rewind-on-close, no file marks

   27 block	Third Matsushita (Panasonic/SoundBlaster) CD-ROM
  		  0 = /dev/sbpcd8	Panasonic CD-ROM controller 2 unit 0
  		  1 = /dev/sbpcd9	Panasonic CD-ROM controller 2 unit 1
  		  2 = /dev/sbpcd10	Panasonic CD-ROM controller 2 unit 2
  		  3 = /dev/sbpcd11	Panasonic CD-ROM controller 2 unit 3
  
   28 char	Stallion serial card - card programming
  		  0 = /dev/staliomem0	First Stallion card I/O memory
  		  1 = /dev/staliomem1	Second Stallion card I/O memory
  		  2 = /dev/staliomem2	Third Stallion card I/O memory
  		  3 = /dev/staliomem3	Fourth Stallion card I/O memory

   28 char	Atari SLM ACSI laser printer (68k/Atari)
  		  0 = /dev/slm0		First SLM laser printer
  		  1 = /dev/slm1		Second SLM laser printer
  		    ...
   28 block	Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
  		  0 = /dev/sbpcd12	Panasonic CD-ROM controller 3 unit 0
  		  1 = /dev/sbpcd13	Panasonic CD-ROM controller 3 unit 1
  		  2 = /dev/sbpcd14	Panasonic CD-ROM controller 3 unit 2
  		  3 = /dev/sbpcd15	Panasonic CD-ROM controller 3 unit 3

   28 block	ACSI disk (68k/Atari)
  		  0 = /dev/ada		First ACSI disk whole disk
  		 16 = /dev/adb		Second ACSI disk whole disk
  		 32 = /dev/adc		Third ACSI disk whole disk
  		    ...
  		240 = /dev/adp		16th ACSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15, like SCSI.
  
   29 char	Universal frame buffer
  		  0 = /dev/fb0		First frame buffer
  		  1 = /dev/fb1		Second frame buffer
  		    ...
  		 31 = /dev/fb31		32nd frame buffer
  
   29 block	Aztech/Orchid/Okano/Wearnes CD-ROM
  		  0 = /dev/aztcd	Aztech CD-ROM
  
   30 char	iBCS-2 compatibility devices
  		  0 = /dev/socksys	Socket access
  		  1 = /dev/spx		SVR3 local X interface
  		 32 = /dev/inet/ip	Network access
  		 33 = /dev/inet/icmp
  		 34 = /dev/inet/ggp
  		 35 = /dev/inet/ipip
  		 36 = /dev/inet/tcp
  		 37 = /dev/inet/egp
  		 38 = /dev/inet/pup
  		 39 = /dev/inet/udp
  		 40 = /dev/inet/idp
  		 41 = /dev/inet/rawip
  
  		Additionally, iBCS-2 requires the following links:
  
  		/dev/ip -> /dev/inet/ip
  		/dev/icmp -> /dev/inet/icmp
  		/dev/ggp -> /dev/inet/ggp
  		/dev/ipip -> /dev/inet/ipip
  		/dev/tcp -> /dev/inet/tcp
  		/dev/egp -> /dev/inet/egp
  		/dev/pup -> /dev/inet/pup
  		/dev/udp -> /dev/inet/udp
  		/dev/idp -> /dev/inet/idp
  		/dev/rawip -> /dev/inet/rawip
  		/dev/inet/arp -> /dev/inet/udp
  		/dev/inet/rip -> /dev/inet/udp
  		/dev/nfsd -> /dev/socksys
  		/dev/X0R -> /dev/null (? apparently not required ?)
  
   30 block	Philips LMS CM-205 CD-ROM
  		  0 = /dev/cm205cd	Philips LMS CM-205 CD-ROM
  
  		/dev/lmscd is an older name for this device.  This
  		driver does not work with the CM-205MS CD-ROM.
  
   31 char	MPU-401 MIDI
  		  0 = /dev/mpu401data	MPU-401 data port
  		  1 = /dev/mpu401stat	MPU-401 status port

   31 block	ROM/flash memory card
  		  0 = /dev/rom0		First ROM card (rw)
  		      ...
  		  7 = /dev/rom7		Eighth ROM card (rw)
  		  8 = /dev/rrom0	First ROM card (ro)
  		    ...
  		 15 = /dev/rrom7	Eighth ROM card (ro)
  		 16 = /dev/flash0	First flash memory card (rw)
  		    ...
  		 23 = /dev/flash7	Eighth flash memory card (rw)
  		 24 = /dev/rflash0	First flash memory card (ro)
  		    ...
  		 31 = /dev/rflash7	Eighth flash memory card (ro)
  
  		The read-write (rw) devices support back-caching
  		written data in RAM, as well as writing to flash RAM
  		devices.  The read-only devices (ro) support reading
  		only.
  
   32 char	Specialix serial card
  		  0 = /dev/ttyX0	First Specialix port
  		  1 = /dev/ttyX1	Second Specialix port
  		    ...
   32 block	Philips LMS CM-206 CD-ROM
  		  0 = /dev/cm206cd	Philips LMS CM-206 CD-ROM
  
   33 char	Specialix serial card - alternate devices
  		  0 = /dev/cux0		Callout device for ttyX0
  		  1 = /dev/cux1		Callout device for ttyX1
  		    ...
   33 block	Third IDE hard disk/CD-ROM interface
  		  0 = /dev/hde		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdf		Slave: whole disk (or CD-ROM)
  
  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   34 char	Z8530 HDLC driver
  		  0 = /dev/scc0		First Z8530, first port
  		  1 = /dev/scc1		First Z8530, second port
  		  2 = /dev/scc2		Second Z8530, first port
  		  3 = /dev/scc3		Second Z8530, second port
  		    ...
  
  		In a previous version these devices were named
  		/dev/sc1 for /dev/scc0, /dev/sc2 for /dev/scc1, and so
  		on.
  
   34 block	Fourth IDE hard disk/CD-ROM interface
  		  0 = /dev/hdg		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdh		Slave: whole disk (or CD-ROM)

  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   35 char	tclmidi MIDI driver
  		  0 = /dev/midi0	First MIDI port, kernel timed
  		  1 = /dev/midi1	Second MIDI port, kernel timed
  		  2 = /dev/midi2	Third MIDI port, kernel timed
  		  3 = /dev/midi3	Fourth MIDI port, kernel timed
  		 64 = /dev/rmidi0	First MIDI port, untimed
  		 65 = /dev/rmidi1	Second MIDI port, untimed
  		 66 = /dev/rmidi2	Third MIDI port, untimed
  		 67 = /dev/rmidi3	Fourth MIDI port, untimed
  		128 = /dev/smpte0	First MIDI port, SMPTE timed
  		129 = /dev/smpte1	Second MIDI port, SMPTE timed
  		130 = /dev/smpte2	Third MIDI port, SMPTE timed
  		131 = /dev/smpte3	Fourth MIDI port, SMPTE timed

   35 block	Slow memory ramdisk
  		  0 = /dev/slram	Slow memory ramdisk
  
   36 char	Netlink support
  		  0 = /dev/route	Routing, device updates, kernel to user
  		  1 = /dev/skip		enSKIP security cache control
  		  3 = /dev/fwmonitor	Firewall packet copies
  		 16 = /dev/tap0		First Ethertap device
  		    ...
  		 31 = /dev/tap15	16th Ethertap device

   36 block	OBSOLETE (was MCA ESDI hard disk)

  
   37 char	IDE tape
  		  0 = /dev/ht0		First IDE tape
  		  1 = /dev/ht1		Second IDE tape
  		    ...
  		128 = /dev/nht0		First IDE tape, no rewind-on-close
  		129 = /dev/nht1		Second IDE tape, no rewind-on-close
  		    ...
  
  		Currently, only one IDE tape drive is supported.
  
   37 block	Zorro II ramdisk
  		  0 = /dev/z2ram	Zorro II ramdisk
  
   38 char	Myricom PCI Myrinet board
  		  0 = /dev/mlanai0	First Myrinet board
  		  1 = /dev/mlanai1	Second Myrinet board
  		    ...
  
  		This device is used for status query, board control
  		and "user level packet I/O."  This board is also
  		accessible as a standard networking "eth" device.

   38 block	OBSOLETE (was Linux/AP+)

  
   39 char	ML-16P experimental I/O board
  		  0 = /dev/ml16pa-a0	First card, first analog channel
  		  1 = /dev/ml16pa-a1	First card, second analog channel
  		    ...
  		 15 = /dev/ml16pa-a15	First card, 16th analog channel
  		 16 = /dev/ml16pa-d	First card, digital lines
  		 17 = /dev/ml16pa-c0	First card, first counter/timer
  		 18 = /dev/ml16pa-c1	First card, second counter/timer
  		 19 = /dev/ml16pa-c2	First card, third counter/timer
  		 32 = /dev/ml16pb-a0	Second card, first analog channel
  		 33 = /dev/ml16pb-a1	Second card, second analog channel
  		    ...
  		 47 = /dev/ml16pb-a15	Second card, 16th analog channel
  		 48 = /dev/ml16pb-d	Second card, digital lines
  		 49 = /dev/ml16pb-c0	Second card, first counter/timer
  		 50 = /dev/ml16pb-c1	Second card, second counter/timer
  		 51 = /dev/ml16pb-c2	Second card, third counter/timer
  		      ...

   39 block

   40 char

   40 block

  
   41 char	Yet Another Micro Monitor
  		  0 = /dev/yamm		Yet Another Micro Monitor

   41 block

  
   42 char	Demo/sample use

   42 block	Demo/sample use
  
  		This number is intended for use in sample code, as
  		well as a general "example" device number.  It
  		should never be used for a device driver that is being
  		distributed; either obtain an official number or use
  		the local/experimental range.  The sudden addition or
  		removal of a driver with this number should not cause
  		ill effects to the system (bugs excepted.)
  
  		IN PARTICULAR, ANY DISTRIBUTION WHICH CONTAINS A
  		DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
  
   43 char	isdn4linux virtual modem
  		  0 = /dev/ttyI0	First virtual modem
  		    ...
  		 63 = /dev/ttyI63	64th virtual modem

   43 block	Network block devices
  		  0 = /dev/nb0		First network block device
  		  1 = /dev/nb1		Second network block device
  		    ...
  
  		Network Block Device is somehow similar to loopback
  		devices: If you read from it, it sends packet across
  		network asking server for data. If you write to it, it
  		sends packet telling server to write. It could be used
  		to mounting filesystems over the net, swapping over
  		the net, implementing block device in userland etc.
  
   44 char	isdn4linux virtual modem - alternate devices
  		  0 = /dev/cui0		Callout device for ttyI0
  		    ...
  		 63 = /dev/cui63	Callout device for ttyI63

   44 block	Flash Translation Layer (FTL) filesystems
  		  0 = /dev/ftla		FTL on first Memory Technology Device
  		 16 = /dev/ftlb		FTL on second Memory Technology Device
  		 32 = /dev/ftlc		FTL on third Memory Technology Device
  		    ...

  		240 = /dev/ftlp		FTL on 16th Memory Technology Device

  
  		Partitions are handled in the same way as for IDE

  		disks (see major number 3) except that the partition

  		limit is 15 rather than 63 per disk (same as SCSI.)
  
   45 char	isdn4linux ISDN BRI driver
  		  0 = /dev/isdn0	First virtual B channel raw data
  		    ...
  		 63 = /dev/isdn63	64th virtual B channel raw data
  		 64 = /dev/isdnctrl0	First channel control/debug
  		    ...
  		127 = /dev/isdnctrl63	64th channel control/debug
  
  		128 = /dev/ippp0	First SyncPPP device
  		    ...
  		191 = /dev/ippp63	64th SyncPPP device
  
  		255 = /dev/isdninfo	ISDN monitor interface

   45 block	Parallel port IDE disk devices
  		  0 = /dev/pda		First parallel port IDE disk
  		 16 = /dev/pdb		Second parallel port IDE disk
  		 32 = /dev/pdc		Third parallel port IDE disk
  		 48 = /dev/pdd		Fourth parallel port IDE disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the partition
  		limit is 15 rather than 63 per disk.
  
   46 char	Comtrol Rocketport serial card
  		  0 = /dev/ttyR0	First Rocketport port
  		  1 = /dev/ttyR1	Second Rocketport port
  		    ...
   46 block	Parallel port ATAPI CD-ROM devices
  		  0 = /dev/pcd0		First parallel port ATAPI CD-ROM
  		  1 = /dev/pcd1		Second parallel port ATAPI CD-ROM
  		  2 = /dev/pcd2		Third parallel port ATAPI CD-ROM
  		  3 = /dev/pcd3		Fourth parallel port ATAPI CD-ROM
  
   47 char	Comtrol Rocketport serial card - alternate devices
  		  0 = /dev/cur0		Callout device for ttyR0
  		  1 = /dev/cur1		Callout device for ttyR1
  		    ...
   47 block	Parallel port ATAPI disk devices
  		  0 = /dev/pf0		First parallel port ATAPI disk
  		  1 = /dev/pf1		Second parallel port ATAPI disk
  		  2 = /dev/pf2		Third parallel port ATAPI disk
  		  3 = /dev/pf3		Fourth parallel port ATAPI disk
  
  		This driver is intended for floppy disks and similar
  		devices and hence does not support partitioning.
  
   48 char	SDL RISCom serial card
  		  0 = /dev/ttyL0	First RISCom port
  		  1 = /dev/ttyL1	Second RISCom port
  		    ...
   48 block	Mylex DAC960 PCI RAID controller; first controller
  		  0 = /dev/rd/c0d0	First disk, whole disk
  		  8 = /dev/rd/c0d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c0d31	32nd disk, whole disk
  
  		For partitions add:
  		  0 = /dev/rd/c?d?	Whole disk
  		  1 = /dev/rd/c?d?p1	First partition
  		    ...
  		  7 = /dev/rd/c?d?p7	Seventh partition
  
   49 char	SDL RISCom serial card - alternate devices
  		  0 = /dev/cul0		Callout device for ttyL0
  		  1 = /dev/cul1		Callout device for ttyL1
  		    ...
   49 block	Mylex DAC960 PCI RAID controller; second controller
  		  0 = /dev/rd/c1d0	First disk, whole disk
  		  8 = /dev/rd/c1d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c1d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
   50 char	Reserved for GLINT
  
   50 block	Mylex DAC960 PCI RAID controller; third controller
  		  0 = /dev/rd/c2d0	First disk, whole disk
  		  8 = /dev/rd/c2d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c2d31	32nd disk, whole disk
  
   51 char	Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
  		  0 = /dev/bc0		First Baycom radio modem
  		  1 = /dev/bc1		Second Baycom radio modem
  		    ...
   51 block	Mylex DAC960 PCI RAID controller; fourth controller
  		  0 = /dev/rd/c3d0	First disk, whole disk
  		  8 = /dev/rd/c3d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c3d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
   52 char	Spellcaster DataComm/BRI ISDN card
  		  0 = /dev/dcbri0	First DataComm card
  		  1 = /dev/dcbri1	Second DataComm card
  		  2 = /dev/dcbri2	Third DataComm card
  		  3 = /dev/dcbri3	Fourth DataComm card

   52 block	Mylex DAC960 PCI RAID controller; fifth controller
  		  0 = /dev/rd/c4d0	First disk, whole disk
  		  8 = /dev/rd/c4d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c4d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
   53 char	BDM interface for remote debugging MC683xx microcontrollers
  		  0 = /dev/pd_bdm0	PD BDM interface on lp0
  		  1 = /dev/pd_bdm1	PD BDM interface on lp1
  		  2 = /dev/pd_bdm2	PD BDM interface on lp2
  		  4 = /dev/icd_bdm0	ICD BDM interface on lp0
  		  5 = /dev/icd_bdm1	ICD BDM interface on lp1
  		  6 = /dev/icd_bdm2	ICD BDM interface on lp2
  
  		This device is used for the interfacing to the MC683xx
  		microcontrollers via Background Debug Mode by use of a
  		Parallel Port interface. PD is the Motorola Public
  		Domain Interface and ICD is the commercial interface
  		by P&E.
  
   53 block	Mylex DAC960 PCI RAID controller; sixth controller
  		  0 = /dev/rd/c5d0	First disk, whole disk
  		  8 = /dev/rd/c5d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c5d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
   54 char	Electrocardiognosis Holter serial card
  		  0 = /dev/holter0	First Holter port
  		  1 = /dev/holter1	Second Holter port
  		  2 = /dev/holter2	Third Holter port
  
  		A custom serial card used by Electrocardiognosis SRL
  		<mseritan@ottonel.pub.ro> to transfer data from Holter
  		24-hour heart monitoring equipment.
  
   54 block	Mylex DAC960 PCI RAID controller; seventh controller
  		  0 = /dev/rd/c6d0	First disk, whole disk
  		  8 = /dev/rd/c6d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c6d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
   55 char	DSP56001 digital signal processor
  		  0 = /dev/dsp56k	First DSP56001

   55 block	Mylex DAC960 PCI RAID controller; eighth controller

  		  0 = /dev/rd/c7d0	First disk, whole disk
  		  8 = /dev/rd/c7d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c7d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
   56 char	Apple Desktop Bus
  		  0 = /dev/adb		ADB bus control
  
  		Additional devices will be added to this number, all
  		starting with /dev/adb.
  
   56 block	Fifth IDE hard disk/CD-ROM interface
  		  0 = /dev/hdi		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdj		Slave: whole disk (or CD-ROM)
  
  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   57 char	Hayes ESP serial card
  		  0 = /dev/ttyP0	First ESP port
  		  1 = /dev/ttyP1	Second ESP port
  		    ...
  
   57 block	Sixth IDE hard disk/CD-ROM interface
  		  0 = /dev/hdk		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdl		Slave: whole disk (or CD-ROM)
  
  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   58 char	Hayes ESP serial card - alternate devices
  		  0 = /dev/cup0		Callout device for ttyP0
  		  1 = /dev/cup1		Callout device for ttyP1
  		    ...

   58 block	Reserved for logical volume manager
  
   59 char	sf firewall package
  		  0 = /dev/firewall	Communication with sf kernel module
  
   59 block	Generic PDA filesystem device
  		  0 = /dev/pda0		First PDA device
  		  1 = /dev/pda1		Second PDA device
  		    ...
  
  		The pda devices are used to mount filesystems on
  		remote pda's (basically slow handheld machines with
  		proprietary OS's and limited memory and storage
  		running small fs translation drivers) through serial /
  		IRDA / parallel links.
  
  		NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
  
   60-63 char	LOCAL/EXPERIMENTAL USE

   60-63 block	LOCAL/EXPERIMENTAL USE
  		Allocated for local/experimental use.  For devices not
  		assigned official numbers, these ranges should be
  		used in order to avoid conflicting with future assignments.
  
   64 char	ENskip kernel encryption package
  		  0 = /dev/enskip	Communication with ENskip kernel module
  
   64 block	Scramdisk/DriveCrypt encrypted devices
  		  0 = /dev/scramdisk/master    Master node for ioctls
  		  1 = /dev/scramdisk/1         First encrypted device
  		  2 = /dev/scramdisk/2         Second encrypted device
  		  ...
  		255 = /dev/scramdisk/255       255th encrypted device
  
  		The filename of the encrypted container and the passwords
  		are sent via ioctls (using the sdmount tool) to the master
  		node which then activates them via one of the

  		/dev/scramdisk/x nodes for loop mounting (all handled

  		through the sdmount tool).
  
  		Requested by: andy@scramdisklinux.org
  
   65 char	Sundance "plink" Transputer boards (obsolete, unused)
  		  0 = /dev/plink0	First plink device
  		  1 = /dev/plink1	Second plink device
  		  2 = /dev/plink2	Third plink device
  		  3 = /dev/plink3	Fourth plink device
  		 64 = /dev/rplink0	First plink device, raw
  		 65 = /dev/rplink1	Second plink device, raw
  		 66 = /dev/rplink2	Third plink device, raw
  		 67 = /dev/rplink3	Fourth plink device, raw
  		128 = /dev/plink0d	First plink device, debug
  		129 = /dev/plink1d	Second plink device, debug
  		130 = /dev/plink2d	Third plink device, debug
  		131 = /dev/plink3d	Fourth plink device, debug
  		192 = /dev/rplink0d	First plink device, raw, debug
  		193 = /dev/rplink1d	Second plink device, raw, debug
  		194 = /dev/rplink2d	Third plink device, raw, debug
  		195 = /dev/rplink3d	Fourth plink device, raw, debug
  
  		This is a commercial driver; contact James Howes
  		<jth@prosig.demon.co.uk> for information.
  
   65 block	SCSI disk devices (16-31)
  		  0 = /dev/sdq		17th SCSI disk whole disk
  		 16 = /dev/sdr		18th SCSI disk whole disk
  		 32 = /dev/sds		19th SCSI disk whole disk
  		    ...
  		240 = /dev/sdaf		32nd SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   66 char	YARC PowerPC PCI coprocessor card
  		  0 = /dev/yppcpci0	First YARC card
  		  1 = /dev/yppcpci1	Second YARC card
  		    ...
  
   66 block	SCSI disk devices (32-47)
  		  0 = /dev/sdag		33th SCSI disk whole disk
  		 16 = /dev/sdah		34th SCSI disk whole disk
  		 32 = /dev/sdai		35th SCSI disk whole disk
  		    ...
  		240 = /dev/sdav		48nd SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   67 char	Coda network file system
  		  0 = /dev/cfs0		Coda cache manager
  
  		See http://www.coda.cs.cmu.edu for information about Coda.
  
   67 block	SCSI disk devices (48-63)
  		  0 = /dev/sdaw		49th SCSI disk whole disk
  		 16 = /dev/sdax		50th SCSI disk whole disk
  		 32 = /dev/sday		51st SCSI disk whole disk
  		    ...
  		240 = /dev/sdbl		64th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   68 char	CAPI 2.0 interface
  		  0 = /dev/capi20	Control device
  		  1 = /dev/capi20.00	First CAPI 2.0 application
  		  2 = /dev/capi20.01	Second CAPI 2.0 application
  		    ...
  		 20 = /dev/capi20.19	19th CAPI 2.0 application
  
  		ISDN CAPI 2.0 driver for use with CAPI 2.0
  		applications; currently supports the AVM B1 card.
  
   68 block	SCSI disk devices (64-79)
  		  0 = /dev/sdbm		65th SCSI disk whole disk
  		 16 = /dev/sdbn		66th SCSI disk whole disk
  		 32 = /dev/sdbo		67th SCSI disk whole disk
  		    ...
  		240 = /dev/sdcb		80th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   69 char	MA16 numeric accelerator card
  		  0 = /dev/ma16		Board memory access
  
   69 block	SCSI disk devices (80-95)
  		  0 = /dev/sdcc		81st SCSI disk whole disk
  		 16 = /dev/sdcd		82nd SCSI disk whole disk
  		 32 = /dev/sdce		83th SCSI disk whole disk
  		    ...
  		240 = /dev/sdcr		96th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   70 char	SpellCaster Protocol Services Interface
  		  0 = /dev/apscfg	Configuration interface
  		  1 = /dev/apsauth	Authentication interface
  		  2 = /dev/apslog	Logging interface
  		  3 = /dev/apsdbg	Debugging interface
  		 64 = /dev/apsisdn	ISDN command interface
  		 65 = /dev/apsasync	Async command interface
  		128 = /dev/apsmon	Monitor interface
  
   70 block	SCSI disk devices (96-111)
  		  0 = /dev/sdcs		97th SCSI disk whole disk
  		 16 = /dev/sdct		98th SCSI disk whole disk
  		 32 = /dev/sdcu		99th SCSI disk whole disk
  		    ...
  		240 = /dev/sddh		112nd SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   71 char	Computone IntelliPort II serial card
  		  0 = /dev/ttyF0	IntelliPort II board 0, port 0
  		  1 = /dev/ttyF1	IntelliPort II board 0, port 1
  		    ...
  		 63 = /dev/ttyF63	IntelliPort II board 0, port 63
  		 64 = /dev/ttyF64	IntelliPort II board 1, port 0
  		 65 = /dev/ttyF65	IntelliPort II board 1, port 1
  		    ...
  		127 = /dev/ttyF127	IntelliPort II board 1, port 63
  		128 = /dev/ttyF128	IntelliPort II board 2, port 0
  		129 = /dev/ttyF129	IntelliPort II board 2, port 1
  		    ...
  		191 = /dev/ttyF191	IntelliPort II board 2, port 63
  		192 = /dev/ttyF192	IntelliPort II board 3, port 0
  		193 = /dev/ttyF193	IntelliPort II board 3, port 1
  		    ...
  		255 = /dev/ttyF255	IntelliPort II board 3, port 63
  
   71 block	SCSI disk devices (112-127)
  		  0 = /dev/sddi		113th SCSI disk whole disk
  		 16 = /dev/sddj		114th SCSI disk whole disk
  		 32 = /dev/sddk		115th SCSI disk whole disk
  		    ...
  		240 = /dev/sddx		128th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   72 char	Computone IntelliPort II serial card - alternate devices
  		  0 = /dev/cuf0		Callout device for ttyF0
  		  1 = /dev/cuf1		Callout device for ttyF1
  		    ...
  		 63 = /dev/cuf63	Callout device for ttyF63
  		 64 = /dev/cuf64	Callout device for ttyF64
  		 65 = /dev/cuf65	Callout device for ttyF65
  		    ...
  		127 = /dev/cuf127	Callout device for ttyF127
  		128 = /dev/cuf128	Callout device for ttyF128
  		129 = /dev/cuf129	Callout device for ttyF129
  		    ...
  		191 = /dev/cuf191	Callout device for ttyF191
  		192 = /dev/cuf192	Callout device for ttyF192
  		193 = /dev/cuf193	Callout device for ttyF193
  		    ...
  		255 = /dev/cuf255	Callout device for ttyF255
  
   72 block	Compaq Intelligent Drive Array, first controller
  		  0 = /dev/ida/c0d0	First logical drive whole disk
  		 16 = /dev/ida/c0d1	Second logical drive whole disk
  		    ...
  		240 = /dev/ida/c0d15	16th logical drive whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
   73 char	Computone IntelliPort II serial card - control devices
  		  0 = /dev/ip2ipl0	Loadware device for board 0
  		  1 = /dev/ip2stat0	Status device for board 0
  		  4 = /dev/ip2ipl1	Loadware device for board 1
  		  5 = /dev/ip2stat1	Status device for board 1
  		  8 = /dev/ip2ipl2	Loadware device for board 2
  		  9 = /dev/ip2stat2	Status device for board 2
  		 12 = /dev/ip2ipl3	Loadware device for board 3
  		 13 = /dev/ip2stat3	Status device for board 3
  
   73 block	Compaq Intelligent Drive Array, second controller
  		  0 = /dev/ida/c1d0	First logical drive whole disk
  		 16 = /dev/ida/c1d1	Second logical drive whole disk
  		    ...
  		240 = /dev/ida/c1d15	16th logical drive whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
   74 char	SCI bridge
  		  0 = /dev/SCI/0	SCI device 0
  		  1 = /dev/SCI/1	SCI device 1
  		    ...
  
  		Currently for Dolphin Interconnect Solutions' PCI-SCI
  		bridge.
  
   74 block	Compaq Intelligent Drive Array, third controller
  		  0 = /dev/ida/c2d0	First logical drive whole disk
  		 16 = /dev/ida/c2d1	Second logical drive whole disk
  		    ...
  		240 = /dev/ida/c2d15	16th logical drive whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
   75 char	Specialix IO8+ serial card
  		  0 = /dev/ttyW0	First IO8+ port, first card
  		  1 = /dev/ttyW1	Second IO8+ port, first card
  		    ...
  		  8 = /dev/ttyW8	First IO8+ port, second card
  		    ...
  
   75 block	Compaq Intelligent Drive Array, fourth controller
  		  0 = /dev/ida/c3d0	First logical drive whole disk
  		 16 = /dev/ida/c3d1	Second logical drive whole disk
  		    ...
  		240 = /dev/ida/c3d15	16th logical drive whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
   76 char	Specialix IO8+ serial card - alternate devices
  		  0 = /dev/cuw0		Callout device for ttyW0
  		  1 = /dev/cuw1		Callout device for ttyW1
  		    ...
  		  8 = /dev/cuw8		Callout device for ttyW8
  		    ...
  
   76 block	Compaq Intelligent Drive Array, fifth controller
  		  0 = /dev/ida/c4d0	First logical drive whole disk
  		 16 = /dev/ida/c4d1	Second logical drive whole disk
  		    ...
  		240 = /dev/ida/c4d15	16th logical drive whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
  
   77 char	ComScire Quantum Noise Generator
  		  0 = /dev/qng		ComScire Quantum Noise Generator
  
   77 block	Compaq Intelligent Drive Array, sixth controller
  		  0 = /dev/ida/c5d0	First logical drive whole disk
  		 16 = /dev/ida/c5d1	Second logical drive whole disk
  		    ...
  		240 = /dev/ida/c5d15	16th logical drive whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.

   78 char	PAM Software's multimodem boards
  		  0 = /dev/ttyM0	First PAM modem
  		  1 = /dev/ttyM1	Second PAM modem
  		    ...
  
   78 block	Compaq Intelligent Drive Array, seventh controller
  		  0 = /dev/ida/c6d0	First logical drive whole disk
  		 16 = /dev/ida/c6d1	Second logical drive whole disk
  		    ...
  		240 = /dev/ida/c6d15	16th logical drive whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.

   79 char	PAM Software's multimodem boards - alternate devices
  		  0 = /dev/cum0		Callout device for ttyM0
  		  1 = /dev/cum1		Callout device for ttyM1
  		    ...

   79 block	Compaq Intelligent Drive Array, eighth controller

  		  0 = /dev/ida/c7d0	First logical drive whole disk
  		 16 = /dev/ida/c7d1	Second logical drive whole disk
  		    ...
  		240 = /dev/ida/c715	16th logical drive whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.

   80 char	Photometrics AT200 CCD camera
  		  0 = /dev/at200	Photometrics AT200 CCD camera
  
   80 block	I2O hard disk
  		  0 = /dev/i2o/hda	First I2O hard disk, whole disk
  		 16 = /dev/i2o/hdb	Second I2O hard disk, whole disk
  		    ...
  		240 = /dev/i2o/hdp	16th I2O hard disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   81 char	video4linux
  		  0 = /dev/video0	Video capture/overlay device
  		    ...
  		 63 = /dev/video63	Video capture/overlay device
  		 64 = /dev/radio0	Radio device
  		    ...
  		127 = /dev/radio63	Radio device

  		128 = /dev/swradio0	Software Defined Radio device
  		    ...
  		191 = /dev/swradio63	Software Defined Radio device

  		224 = /dev/vbi0		Vertical blank interrupt
  		    ...
  		255 = /dev/vbi31	Vertical blank interrupt

  		Minor numbers are allocated dynamically unless
  		CONFIG_VIDEO_FIXED_MINOR_RANGES (default n)
  		configuration option is set.

   81 block	I2O hard disk
  		  0 = /dev/i2o/hdq	17th I2O hard disk, whole disk
  		 16 = /dev/i2o/hdr	18th I2O hard disk, whole disk
  		    ...
  		240 = /dev/i2o/hdaf	32nd I2O hard disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   82 char	WiNRADiO communications receiver card
  		  0 = /dev/winradio0	First WiNRADiO card
  		  1 = /dev/winradio1	Second WiNRADiO card
  		    ...
  
  		The driver and documentation may be obtained from

  		http://www.winradio.com/

  
   82 block	I2O hard disk
  		  0 = /dev/i2o/hdag	33rd I2O hard disk, whole disk
  		 16 = /dev/i2o/hdah	34th I2O hard disk, whole disk
  		    ...
  		240 = /dev/i2o/hdav	48th I2O hard disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   83 char	Matrox mga_vid video driver
   		 0 = /dev/mga_vid0	1st video card
  		 1 = /dev/mga_vid1	2nd video card
  		 2 = /dev/mga_vid2	3rd video card
  		  ...
  	        15 = /dev/mga_vid15	16th video card
  
   83 block	I2O hard disk
  		  0 = /dev/i2o/hdaw	49th I2O hard disk, whole disk
  		 16 = /dev/i2o/hdax	50th I2O hard disk, whole disk
  		    ...
  		240 = /dev/i2o/hdbl	64th I2O hard disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   84 char	Ikon 1011[57] Versatec Greensheet Interface
  		  0 = /dev/ihcp0	First Greensheet port
  		  1 = /dev/ihcp1	Second Greensheet port
  
   84 block	I2O hard disk
  		  0 = /dev/i2o/hdbm	65th I2O hard disk, whole disk
  		 16 = /dev/i2o/hdbn	66th I2O hard disk, whole disk
  		    ...
  		240 = /dev/i2o/hdcb	80th I2O hard disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   85 char	Linux/SGI shared memory input queue
  		  0 = /dev/shmiq	Master shared input queue
  		  1 = /dev/qcntl0	First device pushed
  		  2 = /dev/qcntl1	Second device pushed
  		    ...
  
   85 block	I2O hard disk
  		  0 = /dev/i2o/hdcc	81st I2O hard disk, whole disk
  		 16 = /dev/i2o/hdcd	82nd I2O hard disk, whole disk
  		    ...
  		240 = /dev/i2o/hdcr	96th I2O hard disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   86 char	SCSI media changer
  		  0 = /dev/sch0		First SCSI media changer
  		  1 = /dev/sch1		Second SCSI media changer
  		    ...
  
   86 block	I2O hard disk
  		  0 = /dev/i2o/hdcs	97th I2O hard disk, whole disk
  		 16 = /dev/i2o/hdct	98th I2O hard disk, whole disk
  		    ...
  		240 = /dev/i2o/hddh	112th I2O hard disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   87 char	Sony Control-A1 stereo control bus
  		  0 = /dev/controla0	First device on chain
  		  1 = /dev/controla1	Second device on chain
  		    ...
  
   87 block	I2O hard disk
  		  0 = /dev/i2o/hddi	113rd I2O hard disk, whole disk
  		 16 = /dev/i2o/hddj	114th I2O hard disk, whole disk
  		    ...
  		240 = /dev/i2o/hddx	128th I2O hard disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
   88 char	COMX synchronous serial card
  		  0 = /dev/comx0	COMX channel 0
  		  1 = /dev/comx1	COMX channel 1
  		    ...
  
   88 block	Seventh IDE hard disk/CD-ROM interface
  		  0 = /dev/hdm		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdn		Slave: whole disk (or CD-ROM)
  
  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   89 char	I2C bus interface
  		  0 = /dev/i2c-0	First I2C adapter
  		  1 = /dev/i2c-1	Second I2C adapter
  		    ...
  
   89 block	Eighth IDE hard disk/CD-ROM interface
  		  0 = /dev/hdo		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdp		Slave: whole disk (or CD-ROM)
  
  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   90 char	Memory Technology Device (RAM, ROM, Flash)
  		  0 = /dev/mtd0		First MTD (rw)
  		  1 = /dev/mtdr0	First MTD (ro)
  		    ...
  		 30 = /dev/mtd15	16th MTD (rw)
  		 31 = /dev/mtdr15	16th MTD (ro)
  
   90 block	Ninth IDE hard disk/CD-ROM interface
  		  0 = /dev/hdq		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdr		Slave: whole disk (or CD-ROM)
  
  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   91 char	CAN-Bus devices
  		  0 = /dev/can0		First CAN-Bus controller
  		  1 = /dev/can1		Second CAN-Bus controller
  		    ...
  
   91 block	Tenth IDE hard disk/CD-ROM interface
  		  0 = /dev/hds		Master: whole disk (or CD-ROM)
  		 64 = /dev/hdt		Slave: whole disk (or CD-ROM)
  
  		Partitions are handled the same way as for the first
  		interface (see major number 3).
  
   92 char	Reserved for ith Kommunikationstechnik MIC ISDN card
  
   92 block	PPDD encrypted disk driver
  		  0 = /dev/ppdd0	First encrypted disk
  		  1 = /dev/ppdd1	Second encrypted disk
  		    ...
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.

   93 char

  
   93 block	NAND Flash Translation Layer filesystem
  		  0 = /dev/nftla	First NFTL layer
  		 16 = /dev/nftlb	Second NFTL layer
  		    ...
  		240 = /dev/nftlp	16th NTFL layer

   94 char

   94 block	IBM S/390 DASD block storage

      		  0 = /dev/dasda First DASD device, major
      		  1 = /dev/dasda1 First DASD device, block 1
  	    	  2 = /dev/dasda2 First DASD device, block 2
      		  3 = /dev/dasda3 First DASD device, block 3
      		  4 = /dev/dasdb Second DASD device, major
      		  5 = /dev/dasdb1 Second DASD device, block 1
      		  6 = /dev/dasdb2 Second DASD device, block 2
      		  7 = /dev/dasdb3 Second DASD device, block 3
  		    ...
  
   95 char	IP filter
  		  0 = /dev/ipl		Filter control device/log file
  		  1 = /dev/ipnat	NAT control device/log file
  		  2 = /dev/ipstate	State information log file
  		  3 = /dev/ipauth	Authentication control device/log file

  		    ...

  
   96 char	Parallel port ATAPI tape devices
  		  0 = /dev/pt0		First parallel port ATAPI tape
  		  1 = /dev/pt1		Second parallel port ATAPI tape
  		    ...
  		128 = /dev/npt0		First p.p. ATAPI tape, no rewind
  		129 = /dev/npt1		Second p.p. ATAPI tape, no rewind
  		    ...

   96 block	Inverse NAND Flash Translation Layer

  		  0 = /dev/inftla First INFTL layer
  		 16 = /dev/inftlb Second INFTL layer
  		    ...
  		240 = /dev/inftlp	16th INTFL layer
  
   97 char	Parallel port generic ATAPI interface
  		  0 = /dev/pg0		First parallel port ATAPI device
  		  1 = /dev/pg1		Second parallel port ATAPI device
  		  2 = /dev/pg2		Third parallel port ATAPI device
  		  3 = /dev/pg3		Fourth parallel port ATAPI device
  
  		These devices support the same API as the generic SCSI
  		devices.

   98 char	Control and Measurement Device (comedi)
  		  0 = /dev/comedi0	First comedi device
  		  1 = /dev/comedi1	Second comedi device
  		    ...

  		See http://stm.lbl.gov/comedi.

  
   98 block	User-mode virtual block device
  		  0 = /dev/ubda		First user-mode block device
  		 16 = /dev/udbb		Second user-mode block device
  		    ...
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
  		This device is used by the user-mode virtual kernel port.
  
   99 char	Raw parallel ports
  		  0 = /dev/parport0	First parallel port
  		  1 = /dev/parport1	Second parallel port
  		    ...
  
   99 block	JavaStation flash disk
  		  0 = /dev/jsfd		JavaStation flash disk
  
  100 char	Telephony for Linux
  		  0 = /dev/phone0	First telephony device
  		  1 = /dev/phone1	Second telephony device
  		    ...
  
  101 char	Motorola DSP 56xxx board
  		  0 = /dev/mdspstat	Status information
  		  1 = /dev/mdsp1	First DSP board I/O controls
  		    ...
  		 16 = /dev/mdsp16	16th DSP board I/O controls
  
  101 block	AMI HyperDisk RAID controller
  		  0 = /dev/amiraid/ar0	First array whole disk
  		 16 = /dev/amiraid/ar1	Second array whole disk
  		    ...
  		240 = /dev/amiraid/ar15	16th array whole disk
  
  		For each device, partitions are added as:
  		  0 = /dev/amiraid/ar?	  Whole disk
  		  1 = /dev/amiraid/ar?p1  First partition
  		  2 = /dev/amiraid/ar?p2  Second partition
  		    ...
  		 15 = /dev/amiraid/ar?p15 15th partition

  102 char

  
  102 block	Compressed block device
  		  0 = /dev/cbd/a	First compressed block device, whole device
  		 16 = /dev/cbd/b	Second compressed block device, whole device
  		    ...
  		240 = /dev/cbd/p	16th compressed block device, whole device
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
  103 char	Arla network file system
  		  0 = /dev/nnpfs0	First NNPFS device
  		  1 = /dev/nnpfs1	Second NNPFS device
  
  		Arla is a free clone of the Andrew File System, AFS.
  		The NNPFS device gives user mode filesystem
  		implementations a kernel presence for caching and easy
  		mounting.  For more information about the project,
  		write to <arla-drinkers@stacken.kth.se> or see
  		http://www.stacken.kth.se/project/arla/
  
  103 block	Audit device
  		  0 = /dev/audit	Audit device
  
  104 char	Flash BIOS support
  
  104 block	Compaq Next Generation Drive Array, first controller
  		  0 = /dev/cciss/c0d0	First logical drive, whole disk
  		 16 = /dev/cciss/c0d1	Second logical drive, whole disk
  		    ...
  		240 = /dev/cciss/c0d15	16th logical drive, whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
  105 char	Comtrol VS-1000 serial controller
  		  0 = /dev/ttyV0	First VS-1000 port
  		  1 = /dev/ttyV1	Second VS-1000 port
  		    ...
  
  105 block	Compaq Next Generation Drive Array, second controller
  		  0 = /dev/cciss/c1d0	First logical drive, whole disk
  		 16 = /dev/cciss/c1d1	Second logical drive, whole disk
  		    ...
  		240 = /dev/cciss/c1d15	16th logical drive, whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
  106 char	Comtrol VS-1000 serial controller - alternate devices
  		  0 = /dev/cuv0		First VS-1000 port
  		  1 = /dev/cuv1		Second VS-1000 port
  		    ...
  
  106 block	Compaq Next Generation Drive Array, third controller
  		  0 = /dev/cciss/c2d0	First logical drive, whole disk
  		 16 = /dev/cciss/c2d1	Second logical drive, whole disk
  		    ...
  		240 = /dev/cciss/c2d15	16th logical drive, whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
  107 char	3Dfx Voodoo Graphics device
  		  0 = /dev/3dfx		Primary 3Dfx graphics device
  
  107 block	Compaq Next Generation Drive Array, fourth controller
  		  0 = /dev/cciss/c3d0	First logical drive, whole disk
  		 16 = /dev/cciss/c3d1	Second logical drive, whole disk
  		    ...
  		240 = /dev/cciss/c3d15	16th logical drive, whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
  108 char	Device independent PPP interface
  		  0 = /dev/ppp		Device independent PPP interface
  
  108 block	Compaq Next Generation Drive Array, fifth controller
  		  0 = /dev/cciss/c4d0	First logical drive, whole disk
  		 16 = /dev/cciss/c4d1	Second logical drive, whole disk
  		    ...
  		240 = /dev/cciss/c4d15	16th logical drive, whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
  109 char	Reserved for logical volume manager
  
  109 block	Compaq Next Generation Drive Array, sixth controller
  		  0 = /dev/cciss/c5d0	First logical drive, whole disk
  		 16 = /dev/cciss/c5d1	Second logical drive, whole disk
  		    ...
  		240 = /dev/cciss/c5d15	16th logical drive, whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
  110 char	miroMEDIA Surround board
  		  0 = /dev/srnd0	First miroMEDIA Surround board
  		  1 = /dev/srnd1	Second miroMEDIA Surround board
  		    ...
  
  110 block	Compaq Next Generation Drive Array, seventh controller
  		  0 = /dev/cciss/c6d0	First logical drive, whole disk
  		 16 = /dev/cciss/c6d1	Second logical drive, whole disk
  		    ...
  		240 = /dev/cciss/c6d15	16th logical drive, whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.

  111 char

  111 block	Compaq Next Generation Drive Array, eighth controller

  		  0 = /dev/cciss/c7d0	First logical drive, whole disk
  		 16 = /dev/cciss/c7d1	Second logical drive, whole disk
  		    ...
  		240 = /dev/cciss/c7d15	16th logical drive, whole disk
  
  		Partitions are handled the same way as for Mylex
  		DAC960 (see major number 48) except that the limit on
  		partitions is 15.
  
  112 char	ISI serial card
  		  0 = /dev/ttyM0	First ISI port
  		  1 = /dev/ttyM1	Second ISI port
  		    ...
  
  		There is currently a device-naming conflict between
  		these and PAM multimodems (major 78).
  
  112 block	IBM iSeries virtual disk
  		  0 = /dev/iseries/vda	First virtual disk, whole disk
  		  8 = /dev/iseries/vdb	Second virtual disk, whole disk
  		    ...
  		200 = /dev/iseries/vdz	26th virtual disk, whole disk
  		208 = /dev/iseries/vdaa	27th virtual disk, whole disk
  		    ...
  		248 = /dev/iseries/vdaf	32nd virtual disk, whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 7.
  
  113 char	ISI serial card - alternate devices
  		  0 = /dev/cum0		Callout device for ttyM0
  		  1 = /dev/cum1		Callout device for ttyM1
  		    ...
  
  113 block	IBM iSeries virtual CD-ROM

  		  0 = /dev/iseries/vcda	First virtual CD-ROM
  		  1 = /dev/iseries/vcdb	Second virtual CD-ROM
  		    ...
  
  114 char	Picture Elements ISE board
  		  0 = /dev/ise0		First ISE board
  		  1 = /dev/ise1		Second ISE board
  		    ...
  		128 = /dev/isex0	Control node for first ISE board
  		129 = /dev/isex1	Control node for second ISE board
  		    ...
  
  		The ISE board is an embedded computer, optimized for
  		image processing. The /dev/iseN nodes are the general
  		I/O access to the board, the /dev/isex0 nodes command
  		nodes used to control the board.
  
  114 block       IDE BIOS powered software RAID interfaces such as the
                  Promise Fastrak
  
                    0 = /dev/ataraid/d0
                    1 = /dev/ataraid/d0p1
                    2 = /dev/ataraid/d0p2
                    ...
                   16 = /dev/ataraid/d1
                   17 = /dev/ataraid/d1p1
                   18 = /dev/ataraid/d1p2
                    ...
                  255 = /dev/ataraid/d15p15
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
  115 char	TI link cable devices (115 was formerly the console driver speaker)
  		  0 = /dev/tipar0    Parallel cable on first parallel port
  		  ...
  		  7 = /dev/tipar7    Parallel cable on seventh parallel port
  
  		  8 = /dev/tiser0    Serial cable on first serial port
  		  ...
  		 15 = /dev/tiser7    Serial cable on seventh serial port
  
  		 16 = /dev/tiusb0    First USB cable
  		  ...
  		 47 = /dev/tiusb31   32nd USB cable
  
  115 block       NetWare (NWFS) Devices (0-255)
  
                  The NWFS (NetWare) devices are used to present a
                  collection of NetWare Mirror Groups or NetWare
                  Partitions as a logical storage segment for
                  use in mounting NetWare volumes.  A maximum of
                  256 NetWare volumes can be supported in a single
                  machine.

                  http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/

  
                  0 = /dev/nwfs/v0    First NetWare (NWFS) Logical Volume
                  1 = /dev/nwfs/v1    Second NetWare (NWFS) Logical Volume
                  2 = /dev/nwfs/v2    Third NetWare (NWFS) Logical Volume
                        ...
                  255 = /dev/nwfs/v255    Last NetWare (NWFS) Logical Volume
  
  116 char	Advanced Linux Sound Driver (ALSA)
  
  116 block       MicroMemory battery backed RAM adapter (NVRAM)

                  Supports 16 boards, 15 partitions each.

                  Requested by neilb at cse.unsw.edu.au.
  
  		 0 = /dev/umem/d0      Whole of first board
  		 1 = /dev/umem/d0p1    First partition of first board
  		 2 = /dev/umem/d0p2    Second partition of first board
  		15 = /dev/umem/d0p15   15th partition of first board
  
  		16 = /dev/umem/d1      Whole of second board
  		17 = /dev/umem/d1p1    First partition of second board
  		    ...
  		255= /dev/umem/d15p15  15th partition of 16th board.
  
  117 char	COSA/SRP synchronous serial card
  		  0 = /dev/cosa0c0	1st board, 1st channel
  		  1 = /dev/cosa0c1	1st board, 2nd channel
  		    ...
  		 16 = /dev/cosa1c0	2nd board, 1st channel
  		 17 = /dev/cosa1c1	2nd board, 2nd channel
  		    ...
  
  117 block       Enterprise Volume Management System (EVMS)
  
                  The EVMS driver uses a layered, plug-in model to provide
                  unparalleled flexibility and extensibility in managing
                  storage.  This allows for easy expansion or customization
                  of various levels of volume management.  Requested by
                  Mark Peloquin (peloquin at us.ibm.com).
  
                  Note: EVMS populates and manages all the devnodes in
                  /dev/evms.
  
                  http://sf.net/projects/evms
  
                    0 = /dev/evms/block_device   EVMS block device
                    1 = /dev/evms/legacyname1    First EVMS legacy device
                    2 = /dev/evms/legacyname2    Second EVMS legacy device
                      ...
                      Both ranges can grow (down or up) until they meet.
                      ...
                  254 = /dev/evms/EVMSname2      Second EVMS native device
                  255 = /dev/evms/EVMSname1      First EVMS native device
  
                  Note: legacyname(s) are derived from the normal legacy
                  device names.  For example, /dev/hda5 would become
                  /dev/evms/hda5.
  
  118 char	IBM Cryptographic Accelerator
  		  0 = /dev/ica	Virtual interface to all IBM Crypto Accelerators
  		  1 = /dev/ica0	IBMCA Device 0
  		  2 = /dev/ica1	IBMCA Device 1
  		    ...
  
  119 char	VMware virtual network control

  		  0 = /dev/vnet0	1st virtual network
  		  1 = /dev/vnet1	2nd virtual network

  		    ...
  
  120-127 char	LOCAL/EXPERIMENTAL USE

  120-127 block	LOCAL/EXPERIMENTAL USE
  		Allocated for local/experimental use.  For devices not
  		assigned official numbers, these ranges should be
  		used in order to avoid conflicting with future assignments.
  
  128-135 char	Unix98 PTY masters
  
  		These devices should not have corresponding device
  		nodes; instead they should be accessed through the
  		/dev/ptmx cloning interface.

  128 block       SCSI disk devices (128-143)
                    0 = /dev/sddy         129th SCSI disk whole disk
                   16 = /dev/sddz         130th SCSI disk whole disk
                   32 = /dev/sdea         131th SCSI disk whole disk
                      ...
                  240 = /dev/sden         144th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.

  129 block       SCSI disk devices (144-159)
                    0 = /dev/sdeo         145th SCSI disk whole disk
                   16 = /dev/sdep         146th SCSI disk whole disk
                   32 = /dev/sdeq         147th SCSI disk whole disk
                      ...
                  240 = /dev/sdfd         160th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
  130 char 	(Misc devices)
  
  130 block       SCSI disk devices (160-175)
                    0 = /dev/sdfe         161st SCSI disk whole disk
                   16 = /dev/sdff         162nd SCSI disk whole disk
                   32 = /dev/sdfg         163rd SCSI disk whole disk
                      ...
                  240 = /dev/sdft         176th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
  131 block       SCSI disk devices (176-191)
                    0 = /dev/sdfu         177th SCSI disk whole disk
                   16 = /dev/sdfv         178th SCSI disk whole disk
                   32 = /dev/sdfw         179th SCSI disk whole disk
                      ...
                  240 = /dev/sdgj         192nd SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.

  132 block       SCSI disk devices (192-207)
                    0 = /dev/sdgk         193rd SCSI disk whole disk
                   16 = /dev/sdgl         194th SCSI disk whole disk
                   32 = /dev/sdgm         195th SCSI disk whole disk
                      ...
                  240 = /dev/sdgz         208th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.

  133 block       SCSI disk devices (208-223)
                    0 = /dev/sdha         209th SCSI disk whole disk
                   16 = /dev/sdhb         210th SCSI disk whole disk
                   32 = /dev/sdhc         211th SCSI disk whole disk
                      ...
                  240 = /dev/sdhp         224th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.

  134 block       SCSI disk devices (224-239)
                    0 = /dev/sdhq         225th SCSI disk whole disk
                   16 = /dev/sdhr         226th SCSI disk whole disk
                   32 = /dev/sdhs         227th SCSI disk whole disk
                      ...
                  240 = /dev/sdif         240th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.

  135 block       SCSI disk devices (240-255)
                    0 = /dev/sdig         241st SCSI disk whole disk
                   16 = /dev/sdih         242nd SCSI disk whole disk
                   32 = /dev/sdih         243rd SCSI disk whole disk
                      ...
                  240 = /dev/sdiv         256th SCSI disk whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.

  136-143 char	Unix98 PTY slaves
  		  0 = /dev/pts/0	First Unix98 pseudo-TTY

  		  1 = /dev/pts/1	Second Unix98 pseudo-TTY

  		    ...
  
  		These device nodes are automatically generated with
  		the proper permissions and modes by mounting the
  		devpts filesystem onto /dev/pts with the appropriate
  		mount options (distribution dependent, however, on
  		*most* distributions the appropriate options are
  		"mode=0620,gid=<gid of the "tty" group>".)
  
  136 block	Mylex DAC960 PCI RAID controller; ninth controller
  		  0 = /dev/rd/c8d0	First disk, whole disk
  		  8 = /dev/rd/c8d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c8d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
  137 block	Mylex DAC960 PCI RAID controller; tenth controller
  		  0 = /dev/rd/c9d0	First disk, whole disk
  		  8 = /dev/rd/c9d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c9d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
  138 block	Mylex DAC960 PCI RAID controller; eleventh controller
  		  0 = /dev/rd/c10d0	First disk, whole disk
  		  8 = /dev/rd/c10d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c10d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
  139 block	Mylex DAC960 PCI RAID controller; twelfth controller
  		  0 = /dev/rd/c11d0	First disk, whole disk
  		  8 = /dev/rd/c11d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c11d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
  140 block	Mylex DAC960 PCI RAID controller; thirteenth controller
  		  0 = /dev/rd/c12d0	First disk, whole disk
  		  8 = /dev/rd/c12d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c12d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
  141 block	Mylex DAC960 PCI RAID controller; fourteenth controller
  		  0 = /dev/rd/c13d0	First disk, whole disk
  		  8 = /dev/rd/c13d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c13d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
  142 block	Mylex DAC960 PCI RAID controller; fifteenth controller
  		  0 = /dev/rd/c14d0	First disk, whole disk
  		  8 = /dev/rd/c14d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c14d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
  143 block	Mylex DAC960 PCI RAID controller; sixteenth controller
  		  0 = /dev/rd/c15d0	First disk, whole disk
  		  8 = /dev/rd/c15d1	Second disk, whole disk
  		    ...
  		248 = /dev/rd/c15d31	32nd disk, whole disk
  
  		Partitions are handled as for major 48.
  
  144 char	Encapsulated PPP
  		  0 = /dev/pppox0	First PPP over Ethernet
  		    ...
  		 63 = /dev/pppox63	64th PPP over Ethernet
  
  		This is primarily used for ADSL.
  
  		The SST 5136-DN DeviceNet interface driver has been
  		relocated to major 183 due to an unfortunate conflict.
  
  144 block	Expansion Area #1 for more non-device (e.g. NFS) mounts
  		  0 = mounted device 256
  		255 = mounted device 511
  
  145 char	SAM9407-based soundcard
  		  0 = /dev/sam0_mixer
  		  1 = /dev/sam0_sequencer
  		  2 = /dev/sam0_midi00
  		  3 = /dev/sam0_dsp
  		  4 = /dev/sam0_audio
  		  6 = /dev/sam0_sndstat
  		 18 = /dev/sam0_midi01
  		 34 = /dev/sam0_midi02
  		 50 = /dev/sam0_midi03
  		 64 = /dev/sam1_mixer
  		    ...
  		128 = /dev/sam2_mixer
  		    ...
  		192 = /dev/sam3_mixer
  		    ...
  
  		Device functions match OSS, but offer a number of
  		addons, which are sam9407 specific.  OSS can be
  		operated simultaneously, taking care of the codec.
  
  145 block	Expansion Area #2 for more non-device (e.g. NFS) mounts
  		  0 = mounted device 512
  		255 = mounted device 767
  
  146 char	SYSTRAM SCRAMNet mirrored-memory network
  		  0 = /dev/scramnet0	First SCRAMNet device
  		  1 = /dev/scramnet1	Second SCRAMNet device
  		    ...
  
  146 block	Expansion Area #3 for more non-device (e.g. NFS) mounts
  		  0 = mounted device 768
  		255 = mounted device 1023
  
  147 char	Aureal Semiconductor Vortex Audio device
  		  0 = /dev/aureal0	First Aureal Vortex
  		  1 = /dev/aureal1	Second Aureal Vortex
  		    ...
  
  147 block	Distributed Replicated Block Device (DRBD)
  		  0 = /dev/drbd0	First DRBD device
  		  1 = /dev/drbd1	Second DRBD device
  		    ...
  
  148 char	Technology Concepts serial card
  		  0 = /dev/ttyT0	First TCL port
  		  1 = /dev/ttyT1	Second TCL port
  		    ...
  
  149 char	Technology Concepts serial card - alternate devices
  		  0 = /dev/cut0		Callout device for ttyT0
  		  1 = /dev/cut0		Callout device for ttyT1
  		    ...
  
  150 char	Real-Time Linux FIFOs
  		  0 = /dev/rtf0		First RTLinux FIFO
  		  1 = /dev/rtf1		Second RTLinux FIFO
  		    ...
  
  151 char	DPT I2O SmartRaid V controller
  		  0 = /dev/dpti0	First DPT I2O adapter
  		  1 = /dev/dpti1	Second DPT I2O adapter
  		    ...
  
  152 char	EtherDrive Control Device
  		  0 = /dev/etherd/ctl	Connect/Disconnect an EtherDrive
  		  1 = /dev/etherd/err	Monitor errors
  		  2 = /dev/etherd/raw	Raw AoE packet monitor
  
  152 block	EtherDrive Block Devices
  		  0 = /dev/etherd/0	EtherDrive 0
  		    ...
  		255 = /dev/etherd/255	EtherDrive 255
  
  153 char	SPI Bus Interface (sometimes referred to as MicroWire)
  		  0 = /dev/spi0		First SPI device on the bus
  		  1 = /dev/spi1		Second SPI device on the bus
  		    ...
  		 15 = /dev/spi15	Sixteenth SPI device on the bus
  
  153 block	Enhanced Metadisk RAID (EMD) storage units
  		  0 = /dev/emd/0	First unit
  		  1 = /dev/emd/0p1	Partition 1 on First unit
  		  2 = /dev/emd/0p2	Partition 2 on First unit
  		    ...
  		 15 = /dev/emd/0p15	Partition 15 on First unit
  
  		 16 = /dev/emd/1	Second unit
  		 32 = /dev/emd/2	Third unit
  		    ...
  		240 = /dev/emd/15	Sixteenth unit
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 15.
  
  154 char	Specialix RIO serial card
  		  0 = /dev/ttySR0	First RIO port
  		    ...
  		255 = /dev/ttySR255	256th RIO port
  
  155 char	Specialix RIO serial card - alternate devices
  		  0 = /dev/cusr0	Callout device for ttySR0
  		    ...
  		255 = /dev/cusr255	Callout device for ttySR255
  
  156 char	Specialix RIO serial card
  		  0 = /dev/ttySR256	257th RIO port
  		    ...
  		255 = /dev/ttySR511	512th RIO port
  
  157 char	Specialix RIO serial card - alternate devices
  		  0 = /dev/cusr256	Callout device for ttySR256
  		    ...
  		255 = /dev/cusr511	Callout device for ttySR511
  
  158 char	Dialogic GammaLink fax driver
  		  0 = /dev/gfax0	GammaLink channel 0
  		  1 = /dev/gfax1	GammaLink channel 1
  		    ...
  
  159 char	RESERVED

  159 block	RESERVED
  
  160 char	General Purpose Instrument Bus (GPIB)
  		  0 = /dev/gpib0	First GPIB bus
  		  1 = /dev/gpib1	Second GPIB bus
  		    ...
  
  160 block       Carmel 8-port SATA Disks on First Controller
  		  0 = /dev/carmel/0     SATA disk 0 whole disk
  		  1 = /dev/carmel/0p1   SATA disk 0 partition 1
  		    ...
  		 31 = /dev/carmel/0p31  SATA disk 0 partition 31
  
  		 32 = /dev/carmel/1     SATA disk 1 whole disk
  		 64 = /dev/carmel/2     SATA disk 2 whole disk
  		    ...
  		224 = /dev/carmel/7     SATA disk 7 whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on
  		partitions is 31.
  
  161 char	IrCOMM devices (IrDA serial/parallel emulation)
  		  0 = /dev/ircomm0	First IrCOMM device
  		  1 = /dev/ircomm1	Second IrCOMM device
  		    ...
  		 16 = /dev/irlpt0	First IrLPT device
  		 17 = /dev/irlpt1	Second IrLPT device
  		    ...
  
  161 block       Carmel 8-port SATA Disks on Second Controller
  		  0 = /dev/carmel/8     SATA disk 8 whole disk
  		  1 = /dev/carmel/8p1   SATA disk 8 partition 1
  		    ...
  		 31 = /dev/carmel/8p31  SATA disk 8 partition 31
  
  		 32 = /dev/carmel/9     SATA disk 9 whole disk
  		 64 = /dev/carmel/10    SATA disk 10 whole disk
  		    ...
  		224 = /dev/carmel/15    SATA disk 15 whole disk
  
  		Partitions are handled in the same way as for IDE
  		disks (see major number 3) except that the limit on

  		partitions is 31.

  
  162 char	Raw block device interface
  		  0 = /dev/rawctl	Raw I/O control device
  		  1 = /dev/raw/raw1	First raw I/O device
  		  2 = /dev/raw/raw2	Second raw I/O device
  		    ...

                   max minor number of raw device is set by kernel config
                   MAX_RAW_DEVS or raw module parameter 'max_raw_devs'

  163 char

  
  164 char	Chase Research AT/PCI-Fast serial card
  		  0 = /dev/ttyCH0	AT/PCI-Fast board 0, port 0
  		    ...
  		 15 = /dev/ttyCH15	AT/PCI-Fast board 0, port 15
  		 16 = /dev/ttyCH16	AT/PCI-Fast board 1, port 0
  		    ...
  		 31 = /dev/ttyCH31	AT/PCI-Fast board 1, port 15
  		 32 = /dev/ttyCH32	AT/PCI-Fast board 2, port 0
  		    ...
  		 47 = /dev/ttyCH47	AT/PCI-Fast board 2, port 15
  		 48 = /dev/ttyCH48	AT/PCI-Fast board 3, port 0
  		    ...
  		 63 = /dev/ttyCH63	AT/PCI-Fast board 3, port 15
  
  165 char	Chase Research AT/PCI-Fast serial card - alternate devices
  		  0 = /dev/cuch0	Callout device for ttyCH0
  		    ...
  		 63 = /dev/cuch63	Callout device for ttyCH63
  
  166 char	ACM USB modems
  		  0 = /dev/ttyACM0	First ACM modem
  		  1 = /dev/ttyACM1	Second ACM modem
  		    ...
  
  167 char	ACM USB modems - alternate devices
  		  0 = /dev/cuacm0	Callout device for ttyACM0
  		  1 = /dev/cuacm1	Callout device for ttyACM1
  		    ...
  
  168 char	Eracom CSA7000 PCI encryption adaptor
  		  0 = /dev/ecsa0	First CSA7000
  		  1 = /dev/ecsa1	Second CSA7000
  		    ...
  
  169 char	Eracom CSA8000 PCI encryption adaptor
  		  0 = /dev/ecsa8-0	First CSA8000
  		  1 = /dev/ecsa8-1	Second CSA8000
  		    ...
  
  170 char	AMI MegaRAC remote access controller
  		  0 = /dev/megarac0	First MegaRAC card
  		  1 = /dev/megarac1	Second MegaRAC card
  		    ...
  
  171 char	Reserved for IEEE 1394 (Firewire)

  172 char	Moxa Intellio serial card
  		  0 = /dev/ttyMX0	First Moxa port
  		  1 = /dev/ttyMX1	Second Moxa port
  		    ...
  		127 = /dev/ttyMX127	128th Moxa port
  		128 = /dev/moxactl	Moxa control port
  
  173 char	Moxa Intellio serial card - alternate devices
  		  0 = /dev/cumx0	Callout device for ttyMX0
  		  1 = /dev/cumx1	Callout device for ttyMX1
  		    ...
  		127 = /dev/cumx127	Callout device for ttyMX127
  
  174 char	SmartIO serial card
  		  0 = /dev/ttySI0	First SmartIO port
  		  1 = /dev/ttySI1	Second SmartIO port
  		    ...
  
  175 char	SmartIO serial card - alternate devices
  		  0 = /dev/cusi0	Callout device for ttySI0
  		  1 = /dev/cusi1	Callout device for ttySI1
  		    ...
  
  176 char	nCipher nFast PCI crypto accelerator
  		  0 = /dev/nfastpci0	First nFast PCI device
  		  1 = /dev/nfastpci1	First nFast PCI device
  		    ...
  
  177 char	TI PCILynx memory spaces
  		  0 = /dev/pcilynx/aux0	 AUX space of first PCILynx card
  		    ...
  		 15 = /dev/pcilynx/aux15 AUX space of 16th PCILynx card
  		 16 = /dev/pcilynx/rom0	 ROM space of first PCILynx card
  		    ...
  		 31 = /dev/pcilynx/rom15 ROM space of 16th PCILynx card
  		 32 = /dev/pcilynx/ram0	 RAM space of first PCILynx card
  		    ...
  		 47 = /dev/pcilynx/ram15 RAM space of 16th PCILynx card
  
  178 char	Giganet cLAN1xxx virtual interface adapter
  		  0 = /dev/clanvi0	First cLAN adapter
  		  1 = /dev/clanvi1	Second cLAN adapter
  		    ...

  179 block       MMC block devices
  		  0 = /dev/mmcblk0      First SD/MMC card
  		  1 = /dev/mmcblk0p1    First partition on first MMC card
  		  8 = /dev/mmcblk1      Second SD/MMC card
  		    ...

  		The start of next SD/MMC card can be configured with
  		CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe
  		time using the mmcblk.perdev_minors option. That would
  		bump the offset between each card to be the configured
  		value instead of the default 8.

  179 char	CCube DVXChip-based PCI products
  		  0 = /dev/dvxirq0	First DVX device
  		  1 = /dev/dvxirq1	Second DVX device
  		    ...
  
  180 char	USB devices
  		  0 = /dev/usb/lp0	First USB printer
  		    ...
  		 15 = /dev/usb/lp15	16th USB printer

  		 48 = /dev/usb/scanner0	First USB scanner
  		    ...
  		 63 = /dev/usb/scanner15 16th USB scanner
  		 64 = /dev/usb/rio500	Diamond Rio 500
  		 65 = /dev/usb/usblcd	USBLCD Interface (info@usblcd.de)
  		 66 = /dev/usb/cpad0	Synaptics cPad (mouse/LCD)

  		 96 = /dev/usb/hiddev0	1st USB HID device
  		    ...
  		111 = /dev/usb/hiddev15	16th USB HID device

  		112 = /dev/usb/auer0	1st auerswald ISDN device
  		    ...
  		127 = /dev/usb/auer15	16th auerswald ISDN device

  		128 = /dev/usb/brlvgr0	First Braille Voyager device
  		    ...
  		131 = /dev/usb/brlvgr3	Fourth Braille Voyager device
  		132 = /dev/usb/idmouse	ID Mouse (fingerprint scanner) device
  		133 = /dev/usb/sisusbvga1	First SiSUSB VGA device
  		    ...

  		140 = /dev/usb/sisusbvga8	Eighth SISUSB VGA device

  		144 = /dev/usb/lcd	USB LCD device
  		160 = /dev/usb/legousbtower0	1st USB Legotower device
  		    ...
  		175 = /dev/usb/legousbtower15	16th USB Legotower device

  		176 = /dev/usb/usbtmc1	First USB TMC device
  		   ...

  		191 = /dev/usb/usbtmc16	16th USB TMC device
  		192 = /dev/usb/yurex1	First USB Yurex device
  		   ...
  		209 = /dev/usb/yurex16	16th USB Yurex device

  
  180 block	USB block devices

  		  0 = /dev/uba		First USB block device
  		  8 = /dev/ubb		Second USB block device
  		 16 = /dev/ubc		Third USB block device

   		    ...

  
  181 char	Conrad Electronic parallel port radio clocks
  		  0 = /dev/pcfclock0	First Conrad radio clock
  		  1 = /dev/pcfclock1	Second Conrad radio clock
  		    ...
  
  182 char	Picture Elements THR2 binarizer
  		  0 = /dev/pethr0	First THR2 board
  		  1 = /dev/pethr1	Second THR2 board
  		    ...
  
  183 char	SST 5136-DN DeviceNet interface
  		  0 = /dev/ss5136dn0	First DeviceNet interface
  		  1 = /dev/ss5136dn1	Second DeviceNet interface
  		    ...
  
  		This device used to be assigned to major number 144.
  		It had to be moved due to an unfortunate conflict.
  
  184 char	Picture Elements' video simulator/sender
  		  0 = /dev/pevss0	First sender board
  		  1 = /dev/pevss1	Second sender board
  		    ...
  
  185 char	InterMezzo high availability file system
  		  0 = /dev/intermezzo0	First cache manager
  		  1 = /dev/intermezzo1	Second cache manager
  		    ...

  		See http://web.archive.org/web/20080115195241/
  		http://inter-mezzo.org/index.html

  
  186 char	Object-based storage control device
  		  0 = /dev/obd0		First obd control device
  		  1 = /dev/obd1		Second obd control device
  		    ...
  
  		See ftp://ftp.lustre.org/pub/obd for code and information.
  
  187 char	DESkey hardware encryption device
  		  0 = /dev/deskey0	First DES key
  		  1 = /dev/deskey1	Second DES key
  		    ...
  
  188 char	USB serial converters
  		  0 = /dev/ttyUSB0	First USB serial converter
  		  1 = /dev/ttyUSB1	Second USB serial converter
  		    ...
  
  189 char	USB serial converters - alternate devices
  		  0 = /dev/cuusb0	Callout device for ttyUSB0
  		  1 = /dev/cuusb1	Callout device for ttyUSB1
  		    ...
  
  190 char	Kansas City tracker/tuner card
  		  0 = /dev/kctt0	First KCT/T card
  		  1 = /dev/kctt1	Second KCT/T card
  		    ...
  
  191 char	Reserved for PCMCIA
  
  192 char	Kernel profiling interface
  		  0 = /dev/profile	Profiling control device
  		  1 = /dev/profile0	Profiling device for CPU 0
  		  2 = /dev/profile1	Profiling device for CPU 1
  		    ...
  
  193 char	Kernel event-tracing interface
  		  0 = /dev/trace	Tracing control device
  		  1 = /dev/trace0	Tracing device for CPU 0
  		  2 = /dev/trace1	Tracing device for CPU 1
  		    ...
  
  194 char	linVideoStreams (LINVS)
  		  0 = /dev/mvideo/status0	Video compression status
  		  1 = /dev/mvideo/stream0	Video stream
  		  2 = /dev/mvideo/frame0	Single compressed frame
  		  3 = /dev/mvideo/rawframe0	Raw uncompressed frame
  		  4 = /dev/mvideo/codec0	Direct codec access
  		  5 = /dev/mvideo/video4linux0	Video4Linux compatibility
  
  		 16 = /dev/mvideo/status1	Second device
  		    ...
  		 32 = /dev/mvideo/status2	Third device
  		    ...
  		    ...

  		240 = /dev/mvideo/status15	16th device

  		    ...
  
  195 char	Nvidia graphics devices
  		  0 = /dev/nvidia0		First Nvidia card
  		  1 = /dev/nvidia1		Second Nvidia card
  		    ...
  		255 = /dev/nvidiactl		Nvidia card control device
  
  196 char	Tormenta T1 card
  		  0 = /dev/tor/0		Master control channel for all cards
  		  1 = /dev/tor/1		First DS0
  		  2 = /dev/tor/2		Second DS0
  		    ...
  		 48 = /dev/tor/48		48th DS0
  		 49 = /dev/tor/49		First pseudo-channel
  		 50 = /dev/tor/50		Second pseudo-channel
  		    ...
  
  197 char	OpenTNF tracing facility
  		  0 = /dev/tnf/t0		Trace 0 data extraction
  		  1 = /dev/tnf/t1		Trace 1 data extraction
  		    ...
  		128 = /dev/tnf/status		Tracing facility status
  		130 = /dev/tnf/trace		Tracing device
  
  198 char	Total Impact TPMP2 quad coprocessor PCI card
  		  0 = /dev/tpmp2/0		First card
  		  1 = /dev/tpmp2/1		Second card
  		    ...
  
  199 char	Veritas volume manager (VxVM) volumes
  		  0 = /dev/vx/rdsk/*/*		First volume
  		  1 = /dev/vx/rdsk/*/*		Second volume
  		    ...
  
  199 block	Veritas volume manager (VxVM) volumes
  		  0 = /dev/vx/dsk/*/*		First volume
  		  1 = /dev/vx/dsk/*/*		Second volume
  		    ...
  
  		The namespace in these directories is maintained by
  		the user space VxVM software.
  
  200 char	Veritas VxVM configuration interface
                    0 = /dev/vx/config		Configuration access node
                    1 = /dev/vx/trace		Volume i/o trace access node
                    2 = /dev/vx/iod		Volume i/o daemon access node
                    3 = /dev/vx/info		Volume information access node
                    4 = /dev/vx/task		Volume tasks access node
                    5 = /dev/vx/taskmon		Volume tasks monitor daemon
  
  201 char	Veritas VxVM dynamic multipathing driver
  		  0 = /dev/vx/rdmp/*		First multipath device
  		  1 = /dev/vx/rdmp/*		Second multipath device
  		    ...
  201 block	Veritas VxVM dynamic multipathing driver
  		  0 = /dev/vx/dmp/*		First multipath device
  		  1 = /dev/vx/dmp/*		Second multipath device
  		    ...
  
  		The namespace in these directories is maintained by
  		the user space VxVM software.
  
  202 char	CPU model-specific registers
  		  0 = /dev/cpu/0/msr		MSRs on CPU 0
  		  1 = /dev/cpu/1/msr		MSRs on CPU 1
  		    ...

  202 block	Xen Virtual Block Device
  		  0 = /dev/xvda       First Xen VBD whole disk
  		  16 = /dev/xvdb      Second Xen VBD whole disk
  		  32 = /dev/xvdc      Third Xen VBD whole disk
  		    ...
  		  240 = /dev/xvdp     Sixteenth Xen VBD whole disk
  
                  Partitions are handled in the same way as for IDE
                  disks (see major number 3) except that the limit on
                  partitions is 15.

  203 char	CPU CPUID information
  		  0 = /dev/cpu/0/cpuid		CPUID on CPU 0
  		  1 = /dev/cpu/1/cpuid		CPUID on CPU 1
  		    ...
  
  204 char	Low-density serial ports
  		  0 = /dev/ttyLU0		LinkUp Systems L72xx UART - port 0
  		  1 = /dev/ttyLU1		LinkUp Systems L72xx UART - port 1
  		  2 = /dev/ttyLU2		LinkUp Systems L72xx UART - port 2
  		  3 = /dev/ttyLU3		LinkUp Systems L72xx UART - port 3
  		  4 = /dev/ttyFB0		Intel Footbridge (ARM)
  		  5 = /dev/ttySA0		StrongARM builtin serial port 0
  		  6 = /dev/ttySA1		StrongARM builtin serial port 1
  		  7 = /dev/ttySA2		StrongARM builtin serial port 2
  		  8 = /dev/ttySC0		SCI serial port (SuperH) - port 0
  		  9 = /dev/ttySC1		SCI serial port (SuperH) - port 1
  		 10 = /dev/ttySC2		SCI serial port (SuperH) - port 2
  		 11 = /dev/ttySC3		SCI serial port (SuperH) - port 3
  		 12 = /dev/ttyFW0		Firmware console - port 0
  		 13 = /dev/ttyFW1		Firmware console - port 1
  		 14 = /dev/ttyFW2		Firmware console - port 2
  		 15 = /dev/ttyFW3		Firmware console - port 3
  		 16 = /dev/ttyAM0		ARM "AMBA" serial port 0
  		    ...
  		 31 = /dev/ttyAM15		ARM "AMBA" serial port 15
  		 32 = /dev/ttyDB0		DataBooster serial port 0
  		    ...
  		 39 = /dev/ttyDB7		DataBooster serial port 7
  		 40 = /dev/ttySG0		SGI Altix console port
  		 41 = /dev/ttySMX0		Motorola i.MX - port 0
  		 42 = /dev/ttySMX1		Motorola i.MX - port 1
  		 43 = /dev/ttySMX2		Motorola i.MX - port 2
  		 44 = /dev/ttyMM0		Marvell MPSC - port 0
  		 45 = /dev/ttyMM1		Marvell MPSC - port 1
  		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
  		    ...
  		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5

  		 50 = /dev/ttyIOC0		Altix serial card
  		    ...
  		 81 = /dev/ttyIOC31		Altix serial card
  		 82 = /dev/ttyVR0		NEC VR4100 series SIU
  		 83 = /dev/ttyVR1		NEC VR4100 series DSIU
  		 84 = /dev/ttyIOC84		Altix ioc4 serial card
  		    ...
  		 115 = /dev/ttyIOC115		Altix ioc4 serial card
  		 116 = /dev/ttySIOC0		Altix ioc3 serial card
  		    ...
  		 147 = /dev/ttySIOC31		Altix ioc3 serial card
  		 148 = /dev/ttyPSC0		PPC PSC - port 0
  		    ...
  		 153 = /dev/ttyPSC5		PPC PSC - port 5
  		 154 = /dev/ttyAT0		ATMEL serial port 0

  		    ...

  		 169 = /dev/ttyAT15		ATMEL serial port 15
  		 170 = /dev/ttyNX0		Hilscher netX serial port 0
  		    ...
  		 185 = /dev/ttyNX15		Hilscher netX serial port 15

  		 186 = /dev/ttyJ0		JTAG1 DCC protocol based serial port emulation

  		 187 = /dev/ttyUL0		Xilinx uartlite - port 0
  		    ...
  		 190 = /dev/ttyUL3		Xilinx uartlite - port 3
  		 191 = /dev/xvc0		Xen virtual console - port 0

  		 192 = /dev/ttyPZ0		pmac_zilog - port 0
  		    ...
  		 195 = /dev/ttyPZ3		pmac_zilog - port 3
  		 196 = /dev/ttyTX0		TX39/49 serial port 0
  		    ...
  		 204 = /dev/ttyTX7		TX39/49 serial port 7
  		 205 = /dev/ttySC0		SC26xx serial port 0
  		 206 = /dev/ttySC1		SC26xx serial port 1
  		 207 = /dev/ttySC2		SC26xx serial port 2
  		 208 = /dev/ttySC3		SC26xx serial port 3

  		 209 = /dev/ttyMAX0		MAX3100 serial port 0
  		 210 = /dev/ttyMAX1		MAX3100 serial port 1
  		 211 = /dev/ttyMAX2		MAX3100 serial port 2
  		 212 = /dev/ttyMAX3		MAX3100 serial port 3

  
  205 char	Low-density serial ports (alternate device)
  		  0 = /dev/culu0		Callout device for ttyLU0
  		  1 = /dev/culu1		Callout device for ttyLU1
  		  2 = /dev/culu2		Callout device for ttyLU2
  		  3 = /dev/culu3		Callout device for ttyLU3
  		  4 = /dev/cufb0		Callout device for ttyFB0
  		  5 = /dev/cusa0		Callout device for ttySA0
  		  6 = /dev/cusa1		Callout device for ttySA1
  		  7 = /dev/cusa2		Callout device for ttySA2
  		  8 = /dev/cusc0		Callout device for ttySC0
  		  9 = /dev/cusc1		Callout device for ttySC1
  		 10 = /dev/cusc2		Callout device for ttySC2
  		 11 = /dev/cusc3		Callout device for ttySC3
  		 12 = /dev/cufw0		Callout device for ttyFW0
  		 13 = /dev/cufw1		Callout device for ttyFW1
  		 14 = /dev/cufw2		Callout device for ttyFW2
  		 15 = /dev/cufw3		Callout device for ttyFW3
  		 16 = /dev/cuam0		Callout device for ttyAM0
  		    ...
  		 31 = /dev/cuam15		Callout device for ttyAM15
  		 32 = /dev/cudb0		Callout device for ttyDB0
  		    ...
  		 39 = /dev/cudb7		Callout device for ttyDB7
  		 40 = /dev/cusg0		Callout device for ttySG0
  		 41 = /dev/ttycusmx0		Callout device for ttySMX0
  		 42 = /dev/ttycusmx1		Callout device for ttySMX1
  		 43 = /dev/ttycusmx2		Callout device for ttySMX2
  		 46 = /dev/cucpm0		Callout device for ttyCPM0
  		    ...
  		 49 = /dev/cucpm5		Callout device for ttyCPM5
  		 50 = /dev/cuioc40		Callout device for ttyIOC40
  		    ...
  		 81 = /dev/cuioc431		Callout device for ttyIOC431

  		 82 = /dev/cuvr0		Callout device for ttyVR0
  		 83 = /dev/cuvr1		Callout device for ttyVR1

  206 char	OnStream SC-x0 tape devices
  		  0 = /dev/osst0		First OnStream SCSI tape, mode 0
  		  1 = /dev/osst1		Second OnStream SCSI tape, mode 0
  		    ...
  		 32 = /dev/osst0l		First OnStream SCSI tape, mode 1
  		 33 = /dev/osst1l		Second OnStream SCSI tape, mode 1
  		    ...
  		 64 = /dev/osst0m		First OnStream SCSI tape, mode 2
  		 65 = /dev/osst1m		Second OnStream SCSI tape, mode 2
  		    ...
  		 96 = /dev/osst0a		First OnStream SCSI tape, mode 3
  		 97 = /dev/osst1a		Second OnStream SCSI tape, mode 3
  		    ...
  		128 = /dev/nosst0		No rewind version of /dev/osst0
  		129 = /dev/nosst1		No rewind version of /dev/osst1
  		    ...
  		160 = /dev/nosst0l		No rewind version of /dev/osst0l
  		161 = /dev/nosst1l		No rewind version of /dev/osst1l
  		    ...
  		192 = /dev/nosst0m		No rewind version of /dev/osst0m
  		193 = /dev/nosst1m		No rewind version of /dev/osst1m
  		    ...
  		224 = /dev/nosst0a		No rewind version of /dev/osst0a
  		225 = /dev/nosst1a		No rewind version of /dev/osst1a
  		    ...
  
  		The OnStream SC-x0 SCSI tapes do not support the
  		standard SCSI SASD command set and therefore need
  		their own driver "osst". Note that the IDE, USB (and
  		maybe ParPort) versions may be driven via ide-scsi or
  		usb-storage SCSI emulation and this osst device and
  		driver as well.  The ADR-x0 drives are QIC-157
  		compliant and don't need osst.
  
  207 char	Compaq ProLiant health feature indicate
  		  0 = /dev/cpqhealth/cpqw	Redirector interface
  		  1 = /dev/cpqhealth/crom	EISA CROM
  		  2 = /dev/cpqhealth/cdt	Data Table
  		  3 = /dev/cpqhealth/cevt	Event Log
  		  4 = /dev/cpqhealth/casr	Automatic Server Recovery
  		  5 = /dev/cpqhealth/cecc	ECC Memory
  		  6 = /dev/cpqhealth/cmca	Machine Check Architecture
  		  7 = /dev/cpqhealth/ccsm	Deprecated CDT
  		  8 = /dev/cpqhealth/cnmi	NMI Handling
  		  9 = /dev/cpqhealth/css	Sideshow Management
  		 10 = /dev/cpqhealth/cram	CMOS interface
  		 11 = /dev/cpqhealth/cpci	PCI IRQ interface
  
  208 char	User space serial ports
  		  0 = /dev/ttyU0		First user space serial port
  		  1 = /dev/ttyU1		Second user space serial port
  		    ...
  
  209 char	User space serial ports (alternate devices)
  		  0 = /dev/cuu0			Callout device for ttyU0
  		  1 = /dev/cuu1			Callout device for ttyU1
  		    ...
  
  210 char	SBE, Inc. sync/async serial card
  		  0 = /dev/sbei/wxcfg0		Configuration device for board 0
  		  1 = /dev/sbei/dld0		Download device for board 0
  		  2 = /dev/sbei/wan00		WAN device, port 0, board 0
  		  3 = /dev/sbei/wan01		WAN device, port 1, board 0
  		  4 = /dev/sbei/wan02		WAN device, port 2, board 0
  		  5 = /dev/sbei/wan03		WAN device, port 3, board 0
  		  6 = /dev/sbei/wanc00		WAN clone device, port 0, board 0
  		  7 = /dev/sbei/wanc01		WAN clone device, port 1, board 0
  		  8 = /dev/sbei/wanc02		WAN clone device, port 2, board 0
  		  9 = /dev/sbei/wanc03		WAN clone device, port 3, board 0
  		 10 = /dev/sbei/wxcfg1		Configuration device for board 1
  		 11 = /dev/sbei/dld1		Download device for board 1
  		 12 = /dev/sbei/wan10		WAN device, port 0, board 1
  		 13 = /dev/sbei/wan11		WAN device, port 1, board 1
  		 14 = /dev/sbei/wan12		WAN device, port 2, board 1
  		 15 = /dev/sbei/wan13		WAN device, port 3, board 1
  		 16 = /dev/sbei/wanc10		WAN clone device, port 0, board 1
  		 17 = /dev/sbei/wanc11		WAN clone device, port 1, board 1
  		 18 = /dev/sbei/wanc12		WAN clone device, port 2, board 1
  		 19 = /dev/sbei/wanc13		WAN clone device, port 3, board 1
  		    ...
  
  		Yes, each board is really spaced 10 (decimal) apart.
  
  211 char	Addinum CPCI1500 digital I/O card
  		  0 = /dev/addinum/cpci1500/0	First CPCI1500 card
  		  1 = /dev/addinum/cpci1500/1	Second CPCI1500 card
  		    ...
  
  212 char	LinuxTV.org DVB driver subsystem

  		  0 = /dev/dvb/adapter0/video0    first video decoder of first card
  		  1 = /dev/dvb/adapter0/audio0    first audio decoder of first card
  		  2 = /dev/dvb/adapter0/sec0      (obsolete/unused)
  		  3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
  		  4 = /dev/dvb/adapter0/demux0    first demux device of first card
  		  5 = /dev/dvb/adapter0/dvr0      first digital video recoder device of first card
  		  6 = /dev/dvb/adapter0/ca0       first common access port of first card
  		  7 = /dev/dvb/adapter0/net0      first network device of first card
  		  8 = /dev/dvb/adapter0/osd0      first on-screen-display device of first card
  		  9 = /dev/dvb/adapter0/video1    second video decoder of first card
  		    ...
  		 64 = /dev/dvb/adapter1/video0    first video decoder of second card
  		    ...
  		128 = /dev/dvb/adapter2/video0    first video decoder of third card
  		    ...
  		196 = /dev/dvb/adapter3/video0    first video decoder of fourth card

  216 char	Bluetooth RFCOMM TTY devices
  		  0 = /dev/rfcomm0		First Bluetooth RFCOMM TTY device
  		  1 = /dev/rfcomm1		Second Bluetooth RFCOMM TTY device

  		    ...

  217 char	Bluetooth RFCOMM TTY devices (alternate devices)
  		  0 = /dev/curf0		Callout device for rfcomm0
  		  1 = /dev/curf1		Callout device for rfcomm1

  		    ...
  
  218 char	The Logical Company bus Unibus/Qbus adapters
  		  0 = /dev/logicalco/bci/0	First bus adapter
  		  1 = /dev/logicalco/bci/1	First bus adapter
  		    ...
  
  219 char	The Logical Company DCI-1300 digital I/O card
  		  0 = /dev/logicalco/dci1300/0	First DCI-1300 card
  		  1 = /dev/logicalco/dci1300/1	Second DCI-1300 card
  		    ...
  
  220 char	Myricom Myrinet "GM" board
  		  0 = /dev/myricom/gm0		First Myrinet GM board
  		  1 = /dev/myricom/gmp0		First board "root access"
  		  2 = /dev/myricom/gm1		Second Myrinet GM board
  		  3 = /dev/myricom/gmp1		Second board "root access"
  		    ...
  
  221 char	VME bus
  		  0 = /dev/bus/vme/m0		First master image
  		  1 = /dev/bus/vme/m1		Second master image
  		  2 = /dev/bus/vme/m2		Third master image
  		  3 = /dev/bus/vme/m3		Fourth master image
  		  4 = /dev/bus/vme/s0		First slave image
  		  5 = /dev/bus/vme/s1		Second slave image
  		  6 = /dev/bus/vme/s2		Third slave image
  		  7 = /dev/bus/vme/s3		Fourth slave image
  		  8 = /dev/bus/vme/ctl		Control
  
  		It is expected that all VME bus drivers will use the
  		same interface.  For interface documentation see
  		http://www.vmelinux.org/.
  
  224 char	A2232 serial card
  		  0 = /dev/ttyY0		First A2232 port
  		  1 = /dev/ttyY1		Second A2232 port
  		    ...
  
  225 char	A2232 serial card (alternate devices)
  		  0 = /dev/cuy0			Callout device for ttyY0
  		  1 = /dev/cuy1			Callout device for ttyY1
  		    ...
  
  226 char	Direct Rendering Infrastructure (DRI)
  		  0 = /dev/dri/card0		First graphics card
  		  1 = /dev/dri/card1		Second graphics card
  		    ...
  
  227 char	IBM 3270 terminal Unix tty access
  		  1 = /dev/3270/tty1		First 3270 terminal
  		  2 = /dev/3270/tty2		Seconds 3270 terminal
  		    ...
  
  228 char	IBM 3270 terminal block-mode access
  		  0 = /dev/3270/tub		Controlling interface
  		  1 = /dev/3270/tub1		First 3270 terminal
  		  2 = /dev/3270/tub2		Second 3270 terminal
  		    ...

  229 char	IBM iSeries/pSeries virtual console
  		  0 = /dev/hvc0			First console port
  		  1 = /dev/hvc1			Second console port

  		    ...
  
  230 char	IBM iSeries virtual tape
  		  0 = /dev/iseries/vt0		First virtual tape, mode 0
  		  1 = /dev/iseries/vt1		Second virtual tape, mode 0
  		    ...
  		 32 = /dev/iseries/vt0l		First virtual tape, mode 1
  		 33 = /dev/iseries/vt1l		Second virtual tape, mode 1
  		    ...
  		 64 = /dev/iseries/vt0m		First virtual tape, mode 2
  		 65 = /dev/iseries/vt1m		Second virtual tape, mode 2
  		    ...
  		 96 = /dev/iseries/vt0a		First virtual tape, mode 3
  		 97 = /dev/iseries/vt1a		Second virtual tape, mode 3
  		      ...
  		128 = /dev/iseries/nvt0		First virtual tape, mode 0, no rewind
  		129 = /dev/iseries/nvt1		Second virtual tape, mode 0, no rewind
  		    ...
  		160 = /dev/iseries/nvt0l	First virtual tape, mode 1, no rewind
  		161 = /dev/iseries/nvt1l	Second virtual tape, mode 1, no rewind
  		    ...
  		192 = /dev/iseries/nvt0m	First virtual tape, mode 2, no rewind
  		193 = /dev/iseries/nvt1m	Second virtual tape, mode 2, no rewind
  		    ...
  		224 = /dev/iseries/nvt0a	First virtual tape, mode 3, no rewind
  		225 = /dev/iseries/nvt1a	Second virtual tape, mode 3, no rewind
  		    ...
  
  		"No rewind" refers to the omission of the default
  		automatic rewind on device close.  The MTREW or MTOFFL
  		ioctl()'s can be used to rewind the tape regardless of
  		the device used to access it.

  231 char	InfiniBand

  		0 = /dev/infiniband/umad0
  		1 = /dev/infiniband/umad1

  		  ...
  		63 = /dev/infiniband/umad63    63rd InfiniBandMad device
  		64 = /dev/infiniband/issm0     First InfiniBand IsSM device
  		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
  		  ...
  		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
  		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
  		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
  		  ...
  		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
  
  232 char	Biometric Devices
  		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
  		1 = /dev/biometric/sensor0/iris		first iris sensor on first device
  		2 = /dev/biometric/sensor0/retina	first retina sensor on first device
  		3 = /dev/biometric/sensor0/voiceprint	first voiceprint sensor on first device
  		4 = /dev/biometric/sensor0/facial	first facial sensor on first device
  		5 = /dev/biometric/sensor0/hand		first hand sensor on first device
  		  ...
  		10 = /dev/biometric/sensor1/fingerprint	first fingerprint sensor on second device
  		  ...
  		20 = /dev/biometric/sensor2/fingerprint	first fingerprint sensor on third device
  		  ...

  233 char	PathScale InfiniPath interconnect
  		0 = /dev/ipath        Primary device for programs (any unit)
  		1 = /dev/ipath0       Access specifically to unit 0
  		2 = /dev/ipath1       Access specifically to unit 1
  		  ...
  		4 = /dev/ipath3       Access specifically to unit 3
  		129 = /dev/ipath_sma    Device used by Subnet Management Agent
  		130 = /dev/ipath_diag   Device used by diagnostics programs

  234-254	char	RESERVED FOR DYNAMIC ASSIGNMENT
  		Character devices that request a dynamic allocation of major number will
  		take numbers starting from 254 and downward.

  240-254 block	LOCAL/EXPERIMENTAL USE
  		Allocated for local/experimental use.  For devices not
  		assigned official numbers, these ranges should be
  		used in order to avoid conflicting with future assignments.
  
  255 char	RESERVED

  255 block	RESERVED
  
  		This major is reserved to assist the expansion to a
  		larger number space.  No device nodes with this major
  		should ever be created on the filesystem.

  		(This is probably not true anymore, but I'll leave it

  		for now /Torben)
  
  ---LARGE MAJORS!!!!!---
  
  256 char	Equinox SST multi-port serial boards
  		   0 = /dev/ttyEQ0	First serial port on first Equinox SST board
  		 127 = /dev/ttyEQ127	Last serial port on first Equinox SST board
  		 128 = /dev/ttyEQ128	First serial port on second Equinox SST board
  		  ...
  		1027 = /dev/ttyEQ1027	Last serial port on eighth Equinox SST board
  
  256 block	Resident Flash Disk Flash Translation Layer
  		  0 = /dev/rfda		First RFD FTL layer
  		 16 = /dev/rfdb		Second RFD FTL layer
  		  ...
  		240 = /dev/rfdp		16th RFD FTL layer

  257 char	Phoenix Technologies Cryptographic Services Driver
  		  0 = /dev/ptlsec	Crypto Services Driver

  257 block	SSFDC Flash Translation Layer filesystem
  		  0 = /dev/ssfdca	First SSFDC layer
  		  8 = /dev/ssfdcb	Second SSFDC layer
  		 16 = /dev/ssfdcc	Third SSFDC layer
  		 24 = /dev/ssfdcd	4th SSFDC layer
  		 32 = /dev/ssfdce	5th SSFDC layer
  		 40 = /dev/ssfdcf	6th SSFDC layer
  		 48 = /dev/ssfdcg	7th SSFDC layer
  		 56 = /dev/ssfdch	8th SSFDC layer
  
  258 block	ROM/Flash read-only translation layer
  		  0 = /dev/blockrom0	First ROM card's translation layer interface
  		  1 = /dev/blockrom1	Second ROM card's translation layer interface
  		  ...

  259 block	Block Extended Major
  		  Used dynamically to hold additional partition minor
  		  numbers and allow large numbers of partitions per device
  
  259 char	FPGA configuration interfaces
  		  0 = /dev/icap0	First Xilinx internal configuration
  		  1 = /dev/icap1	Second Xilinx internal configuration

  260 char	OSD (Object-based-device) SCSI Device
  		  0 = /dev/osd0		First OSD Device
  		  1 = /dev/osd1		Second OSD Device
  		  ...
  		  255 = /dev/osd255	256th OSD Device

   ****	ADDITIONAL /dev DIRECTORY ENTRIES
  
  This section details additional entries that should or may exist in
  the /dev directory.  It is preferred that symbolic links use the same
  form (absolute or relative) as is indicated here.  Links are
  classified as "hard" or "symbolic" depending on the preferred type of
  link; if possible, the indicated type of link should be used.
  
  
  	Compulsory links
  
  These links should exist on all systems:
  
  /dev/fd		/proc/self/fd	symbolic	File descriptors
  /dev/stdin	fd/0		symbolic	stdin file descriptor
  /dev/stdout	fd/1		symbolic	stdout file descriptor
  /dev/stderr	fd/2		symbolic	stderr file descriptor
  /dev/nfsd	socksys		symbolic	Required by iBCS-2
  /dev/X0R	null		symbolic	Required by iBCS-2
  
  Note: /dev/X0R is <letter X>-<digit 0>-<letter R>.
  
  	Recommended links
  
  It is recommended that these links exist on all systems:
  
  /dev/core	/proc/kcore	symbolic	Backward compatibility
  /dev/ramdisk	ram0		symbolic	Backward compatibility
  /dev/ftape	qft0		symbolic	Backward compatibility
  /dev/bttv0	video0		symbolic	Backward compatibility
  /dev/radio	radio0		symbolic	Backward compatibility
  /dev/i2o*	/dev/i2o/*	symbolic	Backward compatibility
  /dev/scd?	sr?		hard		Alternate SCSI CD-ROM name
  
  	Locally defined links
  
  The following links may be established locally to conform to the
  configuration of the system.  This is merely a tabulation of existing
  practice, and does not constitute a recommendation.  However, if they
  exist, they should have the following uses.
  
  /dev/mouse	mouse port	symbolic	Current mouse device
  /dev/tape	tape device	symbolic	Current tape device
  /dev/cdrom	CD-ROM device	symbolic	Current CD-ROM device
  /dev/cdwriter	CD-writer	symbolic	Current CD-writer device
  /dev/scanner	scanner		symbolic	Current scanner device
  /dev/modem	modem port	symbolic	Current dialout device
  /dev/root	root device	symbolic	Current root filesystem
  /dev/swap	swap device	symbolic	Current swap device
  
  /dev/modem should not be used for a modem which supports dialin as
  well as dialout, as it tends to cause lock file problems.  If it
  exists, /dev/modem should point to the appropriate primary TTY device
  (the use of the alternate callout devices is deprecated).
  
  For SCSI devices, /dev/tape and /dev/cdrom should point to the
  ``cooked'' devices (/dev/st* and /dev/sr*, respectively), whereas
  /dev/cdwriter and /dev/scanner should point to the appropriate generic
  SCSI devices (/dev/sg*).
  
  /dev/mouse may point to a primary serial TTY device, a hardware mouse
  device, or a socket for a mouse driver program (e.g. /dev/gpmdata).
  
  	Sockets and pipes
  
  Non-transient sockets and named pipes may exist in /dev.  Common entries are:
  
  /dev/printer	socket		lpd local socket
  /dev/log	socket		syslog local socket
  /dev/gpmdata	socket		gpm mouse multiplexer
  
  	Mount points
  
  The following names are reserved for mounting special filesystems
  under /dev.  These special filesystems provide kernel interfaces that
  cannot be provided with standard device nodes.
  
  /dev/pts	devpts		PTY slave filesystem
  /dev/shm	tmpfs		POSIX shared memory maintenance access
  
   ****	TERMINAL DEVICES
  
  Terminal, or TTY devices are a special class of character devices.  A
  terminal device is any device that could act as a controlling terminal
  for a session; this includes virtual consoles, serial ports, and
  pseudoterminals (PTYs).
  
  All terminal devices share a common set of capabilities known as line

  disciplines; these include the common terminal line discipline as well

  as SLIP and PPP modes.
  
  All terminal devices are named similarly; this section explains the
  naming and use of the various types of TTYs.  Note that the naming
  conventions include several historical warts; some of these are
  Linux-specific, some were inherited from other systems, and some
  reflect Linux outgrowing a borrowed convention.
  
  A hash mark (#) in a device name is used here to indicate a decimal
  number without leading zeroes.
  
  	Virtual consoles and the console device
  
  Virtual consoles are full-screen terminal displays on the system video
  monitor.  Virtual consoles are named /dev/tty#, with numbering
  starting at /dev/tty1; /dev/tty0 is the current virtual console.
  /dev/tty0 is the device that should be used to access the system video
  card on those architectures for which the frame buffer devices
  (/dev/fb*) are not applicable.	Do not use /dev/console
  for this purpose.
  
  The console device, /dev/console, is the device to which system
  messages should be sent, and on which logins should be permitted in
  single-user mode.  Starting with Linux 2.1.71, /dev/console is managed
  by the kernel; for previous versions it should be a symbolic link to
  either /dev/tty0, a specific virtual console such as /dev/tty1, or to
  a serial port primary (tty*, not cu*) device, depending on the
  configuration of the system.
  
  	Serial ports
  
  Serial ports are RS-232 serial ports and any device which simulates
  one, either in hardware (such as internal modems) or in software (such
  as the ISDN driver.)  Under Linux, each serial ports has two device
  names, the primary or callin device and the alternate or callout one.
  Each kind of device is indicated by a different letter.	 For any
  letter X, the names of the devices are /dev/ttyX# and /dev/cux#,
  respectively; for historical reasons, /dev/ttyS# and /dev/ttyC#
  correspond to /dev/cua# and /dev/cub#.	In the future, it should be
  expected that multiple letters will be used; all letters will be upper
  case for the "tty" device (e.g. /dev/ttyDP#) and lower case for the
  "cu" device (e.g. /dev/cudp#).
  
  The names /dev/ttyQ# and /dev/cuq# are reserved for local use.
  
  The alternate devices provide for kernel-based exclusion and somewhat
  different defaults than the primary devices.  Their main purpose is to
  allow the use of serial ports with programs with no inherent or broken
  support for serial ports.  Their use is deprecated, and they may be
  removed from a future version of Linux.
  
  Arbitration of serial ports is provided by the use of lock files with
  the names /var/lock/LCK..ttyX#.	 The contents of the lock file should
  be the PID of the locking process as an ASCII number.
  
  It is common practice to install links such as /dev/modem
  which point to serial ports.  In order to ensure proper locking in the
  presence of these links, it is recommended that software chase
  symlinks and lock all possible names; additionally, it is recommended
  that a lock file be installed with the corresponding alternate
  device.	 In order to avoid deadlocks, it is recommended that the locks
  are acquired in the following order, and released in the reverse:
  
  	1. The symbolic link name, if any (/var/lock/LCK..modem)
  	2. The "tty" name (/var/lock/LCK..ttyS2)
  	3. The alternate device name (/var/lock/LCK..cua2)
  
  In the case of nested symbolic links, the lock files should be
  installed in the order the symlinks are resolved.
  
  Under no circumstances should an application hold a lock while waiting
  for another to be released.  In addition, applications which attempt
  to create lock files for the corresponding alternate device names
  should take into account the possibility of being used on a non-serial
  port TTY, for which no alternate device would exist.
  
  	Pseudoterminals (PTYs)
  
  Pseudoterminals, or PTYs, are used to create login sessions or provide

  other capabilities requiring a TTY line discipline (including SLIP or

  PPP capability) to arbitrary data-generation processes.	 Each PTY has
  a master side, named /dev/pty[p-za-e][0-9a-f], and a slave side, named
  /dev/tty[p-za-e][0-9a-f].  The kernel arbitrates the use of PTYs by
  allowing each master side to be opened only once.
  
  Once the master side has been opened, the corresponding slave device
  can be used in the same manner as any TTY device.  The master and
  slave devices are connected by the kernel, generating the equivalent
  of a bidirectional pipe with TTY capabilities.
  
  Recent versions of the Linux kernels and GNU libc contain support for
  the System V/Unix98 naming scheme for PTYs, which assigns a common
  device, /dev/ptmx, to all the masters (opening it will automatically
  give you a previously unassigned PTY) and a subdirectory, /dev/pts,
  for the slaves; the slaves are named with decimal integers (/dev/pts/#
  in our notation).  This removes the problem of exhausting the
  namespace and enables the kernel to automatically create the device
  nodes for the slaves on demand using the "devpts" filesystem.