/*
   * Device driver for the via-pmu on Apple Powermacs.
   *
   * The VIA (versatile interface adapter) interfaces to the PMU,
   * a 6805 microprocessor core whose primary function is to control
   * battery charging and system power on the PowerBook 3400 and 2400.
   * The PMU also controls the ADB (Apple Desktop Bus) which connects
   * to the keyboard and mouse, as well as the non-volatile RAM
   * and the RTC (real time clock) chip.
   *
   * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
   * Copyright (C) 2001-2002 Benjamin Herrenschmidt

   * Copyright (C) 2006-2007 Johannes Berg

   *
   * THIS DRIVER IS BECOMING A TOTAL MESS !
   *  - Cleanup atomically disabling reply to PMU events after
   *    a sleep or a freq. switch

   *
   */
  #include <stdarg.h>

  #include <linux/mutex.h>

  #include <linux/types.h>
  #include <linux/errno.h>
  #include <linux/kernel.h>
  #include <linux/delay.h>
  #include <linux/sched.h>
  #include <linux/miscdevice.h>
  #include <linux/blkdev.h>
  #include <linux/pci.h>
  #include <linux/slab.h>
  #include <linux/poll.h>
  #include <linux/adb.h>
  #include <linux/pmu.h>
  #include <linux/cuda.h>

  #include <linux/module.h>
  #include <linux/spinlock.h>
  #include <linux/pm.h>
  #include <linux/proc_fs.h>

  #include <linux/seq_file.h>

  #include <linux/init.h>
  #include <linux/interrupt.h>
  #include <linux/device.h>

  #include <linux/syscore_ops.h>

  #include <linux/freezer.h>

  #include <linux/syscalls.h>

  #include <linux/suspend.h>

  #include <linux/cpu.h>

  #include <linux/compat.h>

  #include <linux/of_address.h>
  #include <linux/of_irq.h>

  #include <asm/prom.h>
  #include <asm/machdep.h>
  #include <asm/io.h>
  #include <asm/pgtable.h>

  #include <asm/sections.h>
  #include <asm/irq.h>
  #include <asm/pmac_feature.h>

  #include <asm/pmac_pfunc.h>
  #include <asm/pmac_low_i2c.h>

  #include <asm/uaccess.h>
  #include <asm/mmu_context.h>
  #include <asm/cputable.h>
  #include <asm/time.h>

  #include <asm/backlight.h>

  #include "via-pmu-event.h"

  /* Some compile options */

  #undef DEBUG_SLEEP

  
  /* Misc minor number allocated for /dev/pmu */
  #define PMU_MINOR		154
  
  /* How many iterations between battery polls */
  #define BATTERY_POLLING_COUNT	2

  static DEFINE_MUTEX(pmu_info_proc_mutex);

  static volatile unsigned char __iomem *via;
  
  /* VIA registers - spaced 0x200 bytes apart */
  #define RS		0x200		/* skip between registers */
  #define B		0		/* B-side data */
  #define A		RS		/* A-side data */
  #define DIRB		(2*RS)		/* B-side direction (1=output) */
  #define DIRA		(3*RS)		/* A-side direction (1=output) */
  #define T1CL		(4*RS)		/* Timer 1 ctr/latch (low 8 bits) */
  #define T1CH		(5*RS)		/* Timer 1 counter (high 8 bits) */
  #define T1LL		(6*RS)		/* Timer 1 latch (low 8 bits) */
  #define T1LH		(7*RS)		/* Timer 1 latch (high 8 bits) */
  #define T2CL		(8*RS)		/* Timer 2 ctr/latch (low 8 bits) */
  #define T2CH		(9*RS)		/* Timer 2 counter (high 8 bits) */
  #define SR		(10*RS)		/* Shift register */
  #define ACR		(11*RS)		/* Auxiliary control register */
  #define PCR		(12*RS)		/* Peripheral control register */
  #define IFR		(13*RS)		/* Interrupt flag register */
  #define IER		(14*RS)		/* Interrupt enable register */
  #define ANH		(15*RS)		/* A-side data, no handshake */
  
  /* Bits in B data register: both active low */
  #define TACK		0x08		/* Transfer acknowledge (input) */
  #define TREQ		0x10		/* Transfer request (output) */
  
  /* Bits in ACR */
  #define SR_CTRL		0x1c		/* Shift register control bits */
  #define SR_EXT		0x0c		/* Shift on external clock */
  #define SR_OUT		0x10		/* Shift out if 1 */
  
  /* Bits in IFR and IER */
  #define IER_SET		0x80		/* set bits in IER */
  #define IER_CLR		0		/* clear bits in IER */
  #define SR_INT		0x04		/* Shift register full/empty */
  #define CB2_INT		0x08
  #define CB1_INT		0x10		/* transition on CB1 input */
  
  static volatile enum pmu_state {
  	idle,
  	sending,
  	intack,
  	reading,
  	reading_intr,
  	locked,
  } pmu_state;
  
  static volatile enum int_data_state {
  	int_data_empty,
  	int_data_fill,
  	int_data_ready,
  	int_data_flush
  } int_data_state[2] = { int_data_empty, int_data_empty };
  
  static struct adb_request *current_req;
  static struct adb_request *last_req;
  static struct adb_request *req_awaiting_reply;
  static unsigned char interrupt_data[2][32];
  static int interrupt_data_len[2];
  static int int_data_last;
  static unsigned char *reply_ptr;
  static int data_index;
  static int data_len;
  static volatile int adb_int_pending;
  static volatile int disable_poll;

  static struct device_node *vias;
  static int pmu_kind = PMU_UNKNOWN;

  static int pmu_fully_inited;

  static int pmu_has_adb;

  static struct device_node *gpio_node;

  static unsigned char __iomem *gpio_reg;

  static int gpio_irq = 0;

  static int gpio_irq_enabled = -1;

  static volatile int pmu_suspended;

  static spinlock_t pmu_lock;
  static u8 pmu_intr_mask;
  static int pmu_version;
  static int drop_interrupts;

  #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)

  static int option_lid_wakeup = 1;

  #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */

  static unsigned long async_req_locks;
  static unsigned int pmu_irq_stats[11];
  
  static struct proc_dir_entry *proc_pmu_root;
  static struct proc_dir_entry *proc_pmu_info;
  static struct proc_dir_entry *proc_pmu_irqstats;
  static struct proc_dir_entry *proc_pmu_options;
  static int option_server_mode;

  int pmu_battery_count;
  int pmu_cur_battery;

  unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT;

  struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
  static int query_batt_timer = BATTERY_POLLING_COUNT;
  static struct adb_request batt_req;
  static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES];

  int __fake_sleep;
  int asleep;

  
  #ifdef CONFIG_ADB

  static int adb_dev_map;

  static int pmu_adb_flags;
  
  static int pmu_probe(void);
  static int pmu_init(void);
  static int pmu_send_request(struct adb_request *req, int sync);
  static int pmu_adb_autopoll(int devs);
  static int pmu_adb_reset_bus(void);
  #endif /* CONFIG_ADB */
  
  static int init_pmu(void);

  static void pmu_start(void);

  static irqreturn_t via_pmu_interrupt(int irq, void *arg);
  static irqreturn_t gpio1_interrupt(int irq, void *arg);

  static const struct file_operations pmu_info_proc_fops;
  static const struct file_operations pmu_irqstats_proc_fops;

  static void pmu_pass_intr(unsigned char *data, int len);

  static const struct file_operations pmu_battery_proc_fops;
  static const struct file_operations pmu_options_proc_fops;

  
  #ifdef CONFIG_ADB
  struct adb_driver via_pmu_driver = {
  	"PMU",
  	pmu_probe,
  	pmu_init,
  	pmu_send_request,
  	pmu_adb_autopoll,
  	pmu_poll_adb,
  	pmu_adb_reset_bus
  };
  #endif /* CONFIG_ADB */
  
  extern void low_sleep_handler(void);
  extern void enable_kernel_altivec(void);
  extern void enable_kernel_fp(void);
  
  #ifdef DEBUG_SLEEP
  int pmu_polled_request(struct adb_request *req);

  void pmu_blink(int n);

  #endif
  
  /*
   * This table indicates for each PMU opcode:
   * - the number of data bytes to be sent with the command, or -1
   *   if a length byte should be sent,
   * - the number of response bytes which the PMU will return, or
   *   -1 if it will send a length byte.
   */

  static const s8 pmu_data_len[256][2] = {

  /*	   0	   1	   2	   3	   4	   5	   6	   7  */
  /*00*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*08*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
  /*10*/	{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*18*/	{ 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
  /*20*/	{-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*28*/	{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
  /*30*/	{ 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*38*/	{ 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
  /*40*/	{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*48*/	{ 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
  /*50*/	{ 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
  /*58*/	{ 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
  /*60*/	{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*68*/	{ 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
  /*70*/	{ 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*78*/	{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
  /*80*/	{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*88*/	{ 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
  /*90*/	{ 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*98*/	{ 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
  /*a0*/	{ 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
  /*a8*/	{ 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
  /*b0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*b8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
  /*c0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*c8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
  /*d0*/	{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*d8*/	{ 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
  /*e0*/	{-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
  /*e8*/	{ 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
  /*f0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
  /*f8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
  };
  
  static char *pbook_type[] = {
  	"Unknown PowerBook",
  	"PowerBook 2400/3400/3500(G3)",
  	"PowerBook G3 Series",
  	"1999 PowerBook G3",
  	"Core99"
  };

  int __init find_via_pmu(void)

  {

  	u64 taddr;

  	const u32 *reg;

  	if (via != 0)
  		return 1;

  	vias = of_find_node_by_name(NULL, "via-pmu");
  	if (vias == NULL)

  		return 0;

  	reg = of_get_property(vias, "reg", NULL);

  	if (reg == NULL) {
  		printk(KERN_ERR "via-pmu: No \"reg\" property !
  ");
  		goto fail;
  	}
  	taddr = of_translate_address(vias, reg);

  	if (taddr == OF_BAD_ADDR) {

  		printk(KERN_ERR "via-pmu: Can't translate address !
  ");
  		goto fail;

  	}
  
  	spin_lock_init(&pmu_lock);
  
  	pmu_has_adb = 1;
  
  	pmu_intr_mask =	PMU_INT_PCEJECT |
  			PMU_INT_SNDBRT |
  			PMU_INT_ADB |
  			PMU_INT_TICK;
  	
  	if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0)

  	    || of_device_is_compatible(vias->parent, "ohare")))

  		pmu_kind = PMU_OHARE_BASED;

  	else if (of_device_is_compatible(vias->parent, "paddington"))

  		pmu_kind = PMU_PADDINGTON_BASED;

  	else if (of_device_is_compatible(vias->parent, "heathrow"))

  		pmu_kind = PMU_HEATHROW_BASED;

  	else if (of_device_is_compatible(vias->parent, "Keylargo")
  		 || of_device_is_compatible(vias->parent, "K2-Keylargo")) {

  		struct device_node *gpiop;

  		struct device_node *adbp;

  		u64 gaddr = OF_BAD_ADDR;

  
  		pmu_kind = PMU_KEYLARGO_BASED;

  		adbp = of_find_node_by_type(NULL, "adb");
  		pmu_has_adb = (adbp != NULL);
  		of_node_put(adbp);

  		pmu_intr_mask =	PMU_INT_PCEJECT |
  				PMU_INT_SNDBRT |
  				PMU_INT_ADB |
  				PMU_INT_TICK |
  				PMU_INT_ENVIRONMENT;
  		

  		gpiop = of_find_node_by_name(NULL, "gpio");
  		if (gpiop) {

  			reg = of_get_property(gpiop, "reg", NULL);

  			if (reg)
  				gaddr = of_translate_address(gpiop, reg);

  			if (gaddr != OF_BAD_ADDR)

  				gpio_reg = ioremap(gaddr, 0x10);

  			of_node_put(gpiop);

  		}

  		if (gpio_reg == NULL) {

  			printk(KERN_ERR "via-pmu: Can't find GPIO reg !
  ");

  			goto fail;

  		}

  	} else
  		pmu_kind = PMU_UNKNOWN;

  	via = ioremap(taddr, 0x2000);
  	if (via == NULL) {
  		printk(KERN_ERR "via-pmu: Can't map address !
  ");

  		goto fail_via_remap;

  	}

  	
  	out_8(&via[IER], IER_CLR | 0x7f);	/* disable all intrs */
  	out_8(&via[IFR], 0x7f);			/* clear IFR */
  
  	pmu_state = idle;

  	if (!init_pmu())
  		goto fail_init;

  	printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x
  ",

  	       PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
  	       
  	sys_ctrler = SYS_CTRLER_PMU;
  	
  	return 1;

  
   fail_init:
  	iounmap(via);
  	via = NULL;
   fail_via_remap:

  	iounmap(gpio_reg);
  	gpio_reg = NULL;

   fail:
  	of_node_put(vias);

  	vias = NULL;
  	return 0;

  }
  
  #ifdef CONFIG_ADB

  static int pmu_probe(void)

  {
  	return vias == NULL? -ENODEV: 0;
  }

  static int __init pmu_init(void)

  {
  	if (vias == NULL)
  		return -ENODEV;
  	return 0;
  }
  #endif /* CONFIG_ADB */
  
  /*
   * We can't wait until pmu_init gets called, that happens too late.
   * It happens after IDE and SCSI initialization, which can take a few
   * seconds, and by that time the PMU could have given up on us and
   * turned us off.
   * Thus this is called with arch_initcall rather than device_initcall.
   */
  static int __init via_pmu_start(void)
  {

  	unsigned int irq;

  	if (vias == NULL)
  		return -ENODEV;

  	batt_req.complete = 1;

  	irq = irq_of_parse_and_map(vias, 0);

  	if (!irq) {

  		printk(KERN_ERR "via-pmu: can't map interrupt
  ");

  		return -ENODEV;
  	}

  	/* We set IRQF_NO_SUSPEND because we don't want the interrupt
  	 * to be disabled between the 2 passes of driver suspend, we
  	 * control our own disabling for that one

  	 */

  	if (request_irq(irq, via_pmu_interrupt, IRQF_NO_SUSPEND,
  			"VIA-PMU", (void *)0)) {

  		printk(KERN_ERR "via-pmu: can't request irq %d
  ", irq);
  		return -ENODEV;

  	}

  	if (pmu_kind == PMU_KEYLARGO_BASED) {
  		gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
  		if (gpio_node == NULL)
  			gpio_node = of_find_node_by_name(NULL,
  							 "pmu-interrupt");

  		if (gpio_node)
  			gpio_irq = irq_of_parse_and_map(gpio_node, 0);

  		if (gpio_irq) {

  			if (request_irq(gpio_irq, gpio1_interrupt,
  					IRQF_NO_SUSPEND, "GPIO1 ADB",
  					(void *)0))

  				printk(KERN_ERR "pmu: can't get irq %d"
  				       " (GPIO1)
  ", gpio_irq);
  			else
  				gpio_irq_enabled = 1;
  		}

  	}
  
  	/* Enable interrupts */
  	out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
  
  	pmu_fully_inited = 1;
  
  	/* Make sure PMU settle down before continuing. This is _very_ important
  	 * since the IDE probe may shut interrupts down for quite a bit of time. If
  	 * a PMU communication is pending while this happens, the PMU may timeout
  	 * Not that on Core99 machines, the PMU keeps sending us environement
  	 * messages, we should find a way to either fix IDE or make it call
  	 * pmu_suspend() before masking interrupts. This can also happens while
  	 * scolling with some fbdevs.
  	 */
  	do {
  		pmu_poll();
  	} while (pmu_state != idle);
  
  	return 0;
  }
  
  arch_initcall(via_pmu_start);
  
  /*
   * This has to be done after pci_init, which is a subsys_initcall.
   */
  static int __init via_pmu_dev_init(void)
  {
  	if (vias == NULL)
  		return -ENODEV;

  #ifdef CONFIG_PMAC_BACKLIGHT

  	/* Initialize backlight */

  	pmu_backlight_init();

  #endif

  #ifdef CONFIG_PPC32

    	if (of_machine_is_compatible("AAPL,3400/2400") ||
    		of_machine_is_compatible("AAPL,3500")) {

  		int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
  			NULL, PMAC_MB_INFO_MODEL, 0);
  		pmu_battery_count = 1;
  		if (mb == PMAC_TYPE_COMET)
  			pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
  		else
  			pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;

  	} else if (of_machine_is_compatible("AAPL,PowerBook1998") ||
  		of_machine_is_compatible("PowerBook1,1")) {

  		pmu_battery_count = 2;
  		pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
  		pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
  	} else {

  		struct device_node* prim =
  			of_find_node_by_name(NULL, "power-mgt");

  		const u32 *prim_info = NULL;

  		if (prim)

  			prim_info = of_get_property(prim, "prim-info", NULL);

  		if (prim_info) {
  			/* Other stuffs here yet unknown */
  			pmu_battery_count = (prim_info[6] >> 16) & 0xff;
  			pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
  			if (pmu_battery_count > 1)
  				pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
  		}

  		of_node_put(prim);

  	}

  #endif /* CONFIG_PPC32 */

  	/* Create /proc/pmu */
  	proc_pmu_root = proc_mkdir("pmu", NULL);
  	if (proc_pmu_root) {

  		long i;

  
  		for (i=0; i<pmu_battery_count; i++) {
  			char title[16];

  			sprintf(title, "battery_%ld", i);

  			proc_pmu_batt[i] = proc_create_data(title, 0, proc_pmu_root,
  					&pmu_battery_proc_fops, (void *)i);

  		}

  		proc_pmu_info = proc_create("info", 0, proc_pmu_root, &pmu_info_proc_fops);
  		proc_pmu_irqstats = proc_create("interrupts", 0, proc_pmu_root,
  						&pmu_irqstats_proc_fops);
  		proc_pmu_options = proc_create("options", 0600, proc_pmu_root,
  						&pmu_options_proc_fops);

  	}
  	return 0;
  }
  
  device_initcall(via_pmu_dev_init);

  static int

  init_pmu(void)
  {
  	int timeout;
  	struct adb_request req;
  
  	out_8(&via[B], via[B] | TREQ);			/* negate TREQ */
  	out_8(&via[DIRB], (via[DIRB] | TREQ) & ~TACK);	/* TACK in, TREQ out */
  
  	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
  	timeout =  100000;
  	while (!req.complete) {
  		if (--timeout < 0) {
  			printk(KERN_ERR "init_pmu: no response from PMU
  ");
  			return 0;
  		}
  		udelay(10);
  		pmu_poll();
  	}
  
  	/* ack all pending interrupts */
  	timeout = 100000;
  	interrupt_data[0][0] = 1;
  	while (interrupt_data[0][0] || pmu_state != idle) {
  		if (--timeout < 0) {
  			printk(KERN_ERR "init_pmu: timed out acking intrs
  ");
  			return 0;
  		}
  		if (pmu_state == idle)
  			adb_int_pending = 1;

  		via_pmu_interrupt(0, NULL);

  		udelay(10);
  	}
  
  	/* Tell PMU we are ready.  */
  	if (pmu_kind == PMU_KEYLARGO_BASED) {
  		pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
  		while (!req.complete)
  			pmu_poll();
  	}
  
  	/* Read PMU version */
  	pmu_request(&req, NULL, 1, PMU_GET_VERSION);
  	pmu_wait_complete(&req);
  	if (req.reply_len > 0)
  		pmu_version = req.reply[0];
  	
  	/* Read server mode setting */
  	if (pmu_kind == PMU_KEYLARGO_BASED) {
  		pmu_request(&req, NULL, 2, PMU_POWER_EVENTS,
  			    PMU_PWR_GET_POWERUP_EVENTS);
  		pmu_wait_complete(&req);
  		if (req.reply_len == 2) {
  			if (req.reply[1] & PMU_PWR_WAKEUP_AC_INSERT)
  				option_server_mode = 1;
  			printk(KERN_INFO "via-pmu: Server Mode is %s
  ",
  			       option_server_mode ? "enabled" : "disabled");
  		}
  	}
  	return 1;
  }
  
  int
  pmu_get_model(void)
  {
  	return pmu_kind;
  }

  static void pmu_set_server_mode(int server_mode)
  {
  	struct adb_request req;
  
  	if (pmu_kind != PMU_KEYLARGO_BASED)
  		return;
  
  	option_server_mode = server_mode;
  	pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, PMU_PWR_GET_POWERUP_EVENTS);
  	pmu_wait_complete(&req);
  	if (req.reply_len < 2)
  		return;
  	if (server_mode)
  		pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
  			    PMU_PWR_SET_POWERUP_EVENTS,
  			    req.reply[0], PMU_PWR_WAKEUP_AC_INSERT); 
  	else
  		pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
  			    PMU_PWR_CLR_POWERUP_EVENTS,
  			    req.reply[0], PMU_PWR_WAKEUP_AC_INSERT); 
  	pmu_wait_complete(&req);
  }

  /* This new version of the code for 2400/3400/3500 powerbooks
   * is inspired from the implementation in gkrellm-pmu
   */

  static void

  done_battery_state_ohare(struct adb_request* req)
  {
  	/* format:
  	 *  [0]    :  flags
  	 *    0x01 :  AC indicator
  	 *    0x02 :  charging
  	 *    0x04 :  battery exist
  	 *    0x08 :  
  	 *    0x10 :  
  	 *    0x20 :  full charged
  	 *    0x40 :  pcharge reset
  	 *    0x80 :  battery exist
  	 *
  	 *  [1][2] :  battery voltage
  	 *  [3]    :  CPU temperature
  	 *  [4]    :  battery temperature
  	 *  [5]    :  current
  	 *  [6][7] :  pcharge
  	 *              --tkoba
  	 */
  	unsigned int bat_flags = PMU_BATT_TYPE_HOOPER;
  	long pcharge, charge, vb, vmax, lmax;
  	long vmax_charging, vmax_charged;
  	long amperage, voltage, time, max;
  	int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
  			NULL, PMAC_MB_INFO_MODEL, 0);
  
  	if (req->reply[0] & 0x01)
  		pmu_power_flags |= PMU_PWR_AC_PRESENT;
  	else
  		pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
  	
  	if (mb == PMAC_TYPE_COMET) {
  		vmax_charged = 189;
  		vmax_charging = 213;
  		lmax = 6500;
  	} else {
  		vmax_charged = 330;
  		vmax_charging = 330;
  		lmax = 6500;
  	}
  	vmax = vmax_charged;
  
  	/* If battery installed */
  	if (req->reply[0] & 0x04) {
  		bat_flags |= PMU_BATT_PRESENT;
  		if (req->reply[0] & 0x02)
  			bat_flags |= PMU_BATT_CHARGING;
  		vb = (req->reply[1] << 8) | req->reply[2];
  		voltage = (vb * 265 + 72665) / 10;
  		amperage = req->reply[5];
  		if ((req->reply[0] & 0x01) == 0) {
  			if (amperage > 200)
  				vb += ((amperage - 200) * 15)/100;
  		} else if (req->reply[0] & 0x02) {
  			vb = (vb * 97) / 100;
  			vmax = vmax_charging;
  		}
  		charge = (100 * vb) / vmax;
  		if (req->reply[0] & 0x40) {
  			pcharge = (req->reply[6] << 8) + req->reply[7];
  			if (pcharge > lmax)
  				pcharge = lmax;
  			pcharge *= 100;
  			pcharge = 100 - pcharge / lmax;
  			if (pcharge < charge)
  				charge = pcharge;
  		}
  		if (amperage > 0)
  			time = (charge * 16440) / amperage;
  		else
  			time = 0;
  		max = 100;
  		amperage = -amperage;
  	} else
  		charge = max = amperage = voltage = time = 0;
  
  	pmu_batteries[pmu_cur_battery].flags = bat_flags;
  	pmu_batteries[pmu_cur_battery].charge = charge;
  	pmu_batteries[pmu_cur_battery].max_charge = max;
  	pmu_batteries[pmu_cur_battery].amperage = amperage;
  	pmu_batteries[pmu_cur_battery].voltage = voltage;
  	pmu_batteries[pmu_cur_battery].time_remaining = time;
  
  	clear_bit(0, &async_req_locks);
  }

  static void

  done_battery_state_smart(struct adb_request* req)
  {
  	/* format:
  	 *  [0] : format of this structure (known: 3,4,5)
  	 *  [1] : flags
  	 *  
  	 *  format 3 & 4:
  	 *  
  	 *  [2] : charge
  	 *  [3] : max charge
  	 *  [4] : current
  	 *  [5] : voltage
  	 *  
  	 *  format 5:
  	 *  
  	 *  [2][3] : charge
  	 *  [4][5] : max charge
  	 *  [6][7] : current
  	 *  [8][9] : voltage
  	 */
  	 
  	unsigned int bat_flags = PMU_BATT_TYPE_SMART;
  	int amperage;
  	unsigned int capa, max, voltage;
  	
  	if (req->reply[1] & 0x01)
  		pmu_power_flags |= PMU_PWR_AC_PRESENT;
  	else
  		pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
  
  
  	capa = max = amperage = voltage = 0;
  	
  	if (req->reply[1] & 0x04) {
  		bat_flags |= PMU_BATT_PRESENT;
  		switch(req->reply[0]) {
  			case 3:
  			case 4: capa = req->reply[2];
  				max = req->reply[3];
  				amperage = *((signed char *)&req->reply[4]);
  				voltage = req->reply[5];
  				break;
  			case 5: capa = (req->reply[2] << 8) | req->reply[3];
  				max = (req->reply[4] << 8) | req->reply[5];
  				amperage = *((signed short *)&req->reply[6]);
  				voltage = (req->reply[8] << 8) | req->reply[9];
  				break;
  			default:

  				pr_warn("pmu.c: unrecognized battery info, "
  					"len: %d, %4ph
  ", req->reply_len,
  							   req->reply);

  				break;
  		}
  	}
  
  	if ((req->reply[1] & 0x01) && (amperage > 0))
  		bat_flags |= PMU_BATT_CHARGING;
  
  	pmu_batteries[pmu_cur_battery].flags = bat_flags;
  	pmu_batteries[pmu_cur_battery].charge = capa;
  	pmu_batteries[pmu_cur_battery].max_charge = max;
  	pmu_batteries[pmu_cur_battery].amperage = amperage;
  	pmu_batteries[pmu_cur_battery].voltage = voltage;
  	if (amperage) {
  		if ((req->reply[1] & 0x01) && (amperage > 0))
  			pmu_batteries[pmu_cur_battery].time_remaining
  				= ((max-capa) * 3600) / amperage;
  		else
  			pmu_batteries[pmu_cur_battery].time_remaining
  				= (capa * 3600) / (-amperage);
  	} else
  		pmu_batteries[pmu_cur_battery].time_remaining = 0;
  
  	pmu_cur_battery = (pmu_cur_battery + 1) % pmu_battery_count;
  
  	clear_bit(0, &async_req_locks);
  }

  static void

  query_battery_state(void)
  {
  	if (test_and_set_bit(0, &async_req_locks))
  		return;
  	if (pmu_kind == PMU_OHARE_BASED)
  		pmu_request(&batt_req, done_battery_state_ohare,
  			1, PMU_BATTERY_STATE);
  	else
  		pmu_request(&batt_req, done_battery_state_smart,
  			2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
  }

  static int pmu_info_proc_show(struct seq_file *m, void *v)

  {

  	seq_printf(m, "PMU driver version     : %d
  ", PMU_DRIVER_VERSION);
  	seq_printf(m, "PMU firmware version   : %02x
  ", pmu_version);
  	seq_printf(m, "AC Power               : %d
  ",

  		((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);

  	seq_printf(m, "Battery count          : %d
  ", pmu_battery_count);
  
  	return 0;
  }

  static int pmu_info_proc_open(struct inode *inode, struct file *file)
  {
  	return single_open(file, pmu_info_proc_show, NULL);

  }

  static const struct file_operations pmu_info_proc_fops = {
  	.owner		= THIS_MODULE,
  	.open		= pmu_info_proc_open,
  	.read		= seq_read,
  	.llseek		= seq_lseek,
  	.release	= single_release,
  };
  
  static int pmu_irqstats_proc_show(struct seq_file *m, void *v)

  {
  	int i;

  	static const char *irq_names[] = {
  		"Total CB1 triggered events",
  		"Total GPIO1 triggered events",
  		"PC-Card eject button",
  		"Sound/Brightness button",
  		"ADB message",
  		"Battery state change",
  		"Environment interrupt",
  		"Tick timer",
  		"Ghost interrupt (zero len)",
  		"Empty interrupt (empty mask)",
  		"Max irqs in a row"
          };
  
  	for (i=0; i<11; i++) {

  		seq_printf(m, " %2u: %10u (%s)
  ",

  			     i, pmu_irq_stats[i], irq_names[i]);
  	}

  	return 0;

  }

  static int pmu_irqstats_proc_open(struct inode *inode, struct file *file)

  {

  	return single_open(file, pmu_irqstats_proc_show, NULL);
  }
  
  static const struct file_operations pmu_irqstats_proc_fops = {
  	.owner		= THIS_MODULE,
  	.open		= pmu_irqstats_proc_open,
  	.read		= seq_read,
  	.llseek		= seq_lseek,
  	.release	= single_release,
  };
  
  static int pmu_battery_proc_show(struct seq_file *m, void *v)
  {
  	long batnum = (long)m->private;

  	seq_putc(m, '
  ');
  	seq_printf(m, "flags      : %08x
  ", pmu_batteries[batnum].flags);
  	seq_printf(m, "charge     : %d
  ", pmu_batteries[batnum].charge);
  	seq_printf(m, "max_charge : %d
  ", pmu_batteries[batnum].max_charge);
  	seq_printf(m, "current    : %d
  ", pmu_batteries[batnum].amperage);
  	seq_printf(m, "voltage    : %d
  ", pmu_batteries[batnum].voltage);
  	seq_printf(m, "time rem.  : %d
  ", pmu_batteries[batnum].time_remaining);
  	return 0;

  }

  static int pmu_battery_proc_open(struct inode *inode, struct file *file)

  {

  	return single_open(file, pmu_battery_proc_show, PDE_DATA(inode));

  }

  static const struct file_operations pmu_battery_proc_fops = {
  	.owner		= THIS_MODULE,
  	.open		= pmu_battery_proc_open,
  	.read		= seq_read,
  	.llseek		= seq_lseek,
  	.release	= single_release,
  };
  
  static int pmu_options_proc_show(struct seq_file *m, void *v)
  {

  #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)

  	if (pmu_kind == PMU_KEYLARGO_BASED &&
  	    pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)

  		seq_printf(m, "lid_wakeup=%d
  ", option_lid_wakeup);

  #endif

  	if (pmu_kind == PMU_KEYLARGO_BASED)

  		seq_printf(m, "server_mode=%d
  ", option_server_mode);

  	return 0;

  }

  
  static int pmu_options_proc_open(struct inode *inode, struct file *file)
  {
  	return single_open(file, pmu_options_proc_show, NULL);
  }
  
  static ssize_t pmu_options_proc_write(struct file *file,
  		const char __user *buffer, size_t count, loff_t *pos)

  {
  	char tmp[33];
  	char *label, *val;

  	size_t fcount = count;

  	
  	if (!count)
  		return -EINVAL;
  	if (count > 32)
  		count = 32;
  	if (copy_from_user(tmp, buffer, count))
  		return -EFAULT;
  	tmp[count] = 0;
  
  	label = tmp;
  	while(*label == ' ')
  		label++;
  	val = label;
  	while(*val && (*val != '=')) {
  		if (*val == ' ')
  			*val = 0;
  		val++;
  	}
  	if ((*val) == 0)
  		return -EINVAL;
  	*(val++) = 0;
  	while(*val == ' ')
  		val++;

  #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)

  	if (pmu_kind == PMU_KEYLARGO_BASED &&
  	    pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
  		if (!strcmp(label, "lid_wakeup"))
  			option_lid_wakeup = ((*val) == '1');

  #endif

  	if (pmu_kind == PMU_KEYLARGO_BASED && !strcmp(label, "server_mode")) {
  		int new_value;
  		new_value = ((*val) == '1');
  		if (new_value != option_server_mode)
  			pmu_set_server_mode(new_value);
  	}
  	return fcount;
  }

  static const struct file_operations pmu_options_proc_fops = {
  	.owner		= THIS_MODULE,
  	.open		= pmu_options_proc_open,
  	.read		= seq_read,
  	.llseek		= seq_lseek,
  	.release	= single_release,
  	.write		= pmu_options_proc_write,
  };

  #ifdef CONFIG_ADB
  /* Send an ADB command */

  static int pmu_send_request(struct adb_request *req, int sync)

  {
  	int i, ret;
  
  	if ((vias == NULL) || (!pmu_fully_inited)) {
  		req->complete = 1;
  		return -ENXIO;
  	}
  
  	ret = -EINVAL;
  
  	switch (req->data[0]) {
  	case PMU_PACKET:
  		for (i = 0; i < req->nbytes - 1; ++i)
  			req->data[i] = req->data[i+1];
  		--req->nbytes;
  		if (pmu_data_len[req->data[0]][1] != 0) {
  			req->reply[0] = ADB_RET_OK;
  			req->reply_len = 1;
  		} else
  			req->reply_len = 0;
  		ret = pmu_queue_request(req);
  		break;
  	case CUDA_PACKET:
  		switch (req->data[1]) {
  		case CUDA_GET_TIME:
  			if (req->nbytes != 2)
  				break;
  			req->data[0] = PMU_READ_RTC;
  			req->nbytes = 1;
  			req->reply_len = 3;
  			req->reply[0] = CUDA_PACKET;
  			req->reply[1] = 0;
  			req->reply[2] = CUDA_GET_TIME;
  			ret = pmu_queue_request(req);
  			break;
  		case CUDA_SET_TIME:
  			if (req->nbytes != 6)
  				break;
  			req->data[0] = PMU_SET_RTC;
  			req->nbytes = 5;
  			for (i = 1; i <= 4; ++i)
  				req->data[i] = req->data[i+1];
  			req->reply_len = 3;
  			req->reply[0] = CUDA_PACKET;
  			req->reply[1] = 0;
  			req->reply[2] = CUDA_SET_TIME;
  			ret = pmu_queue_request(req);
  			break;
  		}
  		break;
  	case ADB_PACKET:
  	    	if (!pmu_has_adb)
      			return -ENXIO;
  		for (i = req->nbytes - 1; i > 1; --i)
  			req->data[i+2] = req->data[i];
  		req->data[3] = req->nbytes - 2;
  		req->data[2] = pmu_adb_flags;
  		/*req->data[1] = req->data[1];*/
  		req->data[0] = PMU_ADB_CMD;
  		req->nbytes += 2;
  		req->reply_expected = 1;
  		req->reply_len = 0;
  		ret = pmu_queue_request(req);
  		break;
  	}
  	if (ret) {
  		req->complete = 1;
  		return ret;
  	}
  
  	if (sync)
  		while (!req->complete)
  			pmu_poll();
  
  	return 0;
  }
  
  /* Enable/disable autopolling */

  static int __pmu_adb_autopoll(int devs)

  {
  	struct adb_request req;

  	if (devs) {

  		pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
  			    adb_dev_map >> 8, adb_dev_map);
  		pmu_adb_flags = 2;
  	} else {
  		pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
  		pmu_adb_flags = 0;
  	}
  	while (!req.complete)
  		pmu_poll();
  	return 0;
  }

  static int pmu_adb_autopoll(int devs)
  {
  	if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
  		return -ENXIO;
  
  	adb_dev_map = devs;
  	return __pmu_adb_autopoll(devs);
  }

  /* Reset the ADB bus */

  static int pmu_adb_reset_bus(void)

  {
  	struct adb_request req;
  	int save_autopoll = adb_dev_map;
  
  	if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
  		return -ENXIO;
  
  	/* anyone got a better idea?? */

  	__pmu_adb_autopoll(0);

  	req.nbytes = 4;

  	req.done = NULL;
  	req.data[0] = PMU_ADB_CMD;

  	req.data[1] = ADB_BUSRESET;
  	req.data[2] = 0;

  	req.data[3] = 0;
  	req.data[4] = 0;
  	req.reply_len = 0;
  	req.reply_expected = 1;
  	if (pmu_queue_request(&req) != 0) {
  		printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed
  ");
  		return -EIO;
  	}
  	pmu_wait_complete(&req);
  
  	if (save_autopoll != 0)

  		__pmu_adb_autopoll(save_autopoll);

  
  	return 0;
  }
  #endif /* CONFIG_ADB */
  
  /* Construct and send a pmu request */

  int

  pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
  	    int nbytes, ...)
  {
  	va_list list;
  	int i;
  
  	if (vias == NULL)
  		return -ENXIO;
  
  	if (nbytes < 0 || nbytes > 32) {
  		printk(KERN_ERR "pmu_request: bad nbytes (%d)
  ", nbytes);
  		req->complete = 1;
  		return -EINVAL;
  	}
  	req->nbytes = nbytes;
  	req->done = done;
  	va_start(list, nbytes);
  	for (i = 0; i < nbytes; ++i)
  		req->data[i] = va_arg(list, int);
  	va_end(list);
  	req->reply_len = 0;
  	req->reply_expected = 0;
  	return pmu_queue_request(req);
  }

  int

  pmu_queue_request(struct adb_request *req)
  {
  	unsigned long flags;
  	int nsend;
  
  	if (via == NULL) {
  		req->complete = 1;
  		return -ENXIO;
  	}
  	if (req->nbytes <= 0) {
  		req->complete = 1;
  		return 0;
  	}
  	nsend = pmu_data_len[req->data[0]][0];
  	if (nsend >= 0 && req->nbytes != nsend + 1) {
  		req->complete = 1;
  		return -EINVAL;
  	}
  
  	req->next = NULL;
  	req->sent = 0;
  	req->complete = 0;
  
  	spin_lock_irqsave(&pmu_lock, flags);
  	if (current_req != 0) {
  		last_req->next = req;
  		last_req = req;
  	} else {
  		current_req = req;
  		last_req = req;
  		if (pmu_state == idle)
  			pmu_start();
  	}
  	spin_unlock_irqrestore(&pmu_lock, flags);
  
  	return 0;
  }
  
  static inline void
  wait_for_ack(void)
  {
  	/* Sightly increased the delay, I had one occurrence of the message
  	 * reported
  	 */
  	int timeout = 4000;
  	while ((in_8(&via[B]) & TACK) == 0) {
  		if (--timeout < 0) {
  			printk(KERN_ERR "PMU not responding (!ack)
  ");
  			return;
  		}
  		udelay(10);
  	}
  }
  
  /* New PMU seems to be very sensitive to those timings, so we make sure
   * PCI is flushed immediately */
  static inline void
  send_byte(int x)
  {
  	volatile unsigned char __iomem *v = via;
  
  	out_8(&v[ACR], in_8(&v[ACR]) | SR_OUT | SR_EXT);
  	out_8(&v[SR], x);
  	out_8(&v[B], in_8(&v[B]) & ~TREQ);		/* assert TREQ */
  	(void)in_8(&v[B]);
  }
  
  static inline void
  recv_byte(void)
  {
  	volatile unsigned char __iomem *v = via;
  
  	out_8(&v[ACR], (in_8(&v[ACR]) & ~SR_OUT) | SR_EXT);
  	in_8(&v[SR]);		/* resets SR */
  	out_8(&v[B], in_8(&v[B]) & ~TREQ);
  	(void)in_8(&v[B]);
  }
  
  static inline void
  pmu_done(struct adb_request *req)
  {
  	void (*done)(struct adb_request *) = req->done;
  	mb();
  	req->complete = 1;
      	/* Here, we assume that if the request has a done member, the
      	 * struct request will survive to setting req->complete to 1
      	 */
  	if (done)
  		(*done)(req);
  }

  static void

  pmu_start(void)
  {
  	struct adb_request *req;
  
  	/* assert pmu_state == idle */
  	/* get the packet to send */
  	req = current_req;
  	if (req == 0 || pmu_state != idle
  	    || (/*req->reply_expected && */req_awaiting_reply))
  		return;
  
  	pmu_state = sending;
  	data_index = 1;
  	data_len = pmu_data_len[req->data[0]][0];
  
  	/* Sounds safer to make sure ACK is high before writing. This helped
  	 * kill a problem with ADB and some iBooks
  	 */
  	wait_for_ack();
  	/* set the shift register to shift out and send a byte */
  	send_byte(req->data[0]);
  }

  void

  pmu_poll(void)
  {
  	if (!via)
  		return;
  	if (disable_poll)
  		return;

  	via_pmu_interrupt(0, NULL);

  }

  void

  pmu_poll_adb(void)
  {
  	if (!via)
  		return;
  	if (disable_poll)
  		return;
  	/* Kicks ADB read when PMU is suspended */
  	adb_int_pending = 1;
  	do {

  		via_pmu_interrupt(0, NULL);

  	} while (pmu_suspended && (adb_int_pending || pmu_state != idle
  		|| req_awaiting_reply));
  }

  void

  pmu_wait_complete(struct adb_request *req)
  {
  	if (!via)
  		return;
  	while((pmu_state != idle && pmu_state != locked) || !req->complete)

  		via_pmu_interrupt(0, NULL);

  }
  
  /* This function loops until the PMU is idle and prevents it from
   * anwsering to ADB interrupts. pmu_request can still be called.
   * This is done to avoid spurrious shutdowns when we know we'll have
   * interrupts switched off for a long time
   */

  void

  pmu_suspend(void)
  {
  	unsigned long flags;

  	if (!via)
  		return;
  	
  	spin_lock_irqsave(&pmu_lock, flags);
  	pmu_suspended++;
  	if (pmu_suspended > 1) {
  		spin_unlock_irqrestore(&pmu_lock, flags);
  		return;
  	}
  
  	do {
  		spin_unlock_irqrestore(&pmu_lock, flags);
  		if (req_awaiting_reply)
  			adb_int_pending = 1;

  		via_pmu_interrupt(0, NULL);

  		spin_lock_irqsave(&pmu_lock, flags);
  		if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {

  			if (gpio_irq >= 0)
  				disable_irq_nosync(gpio_irq);
  			out_8(&via[IER], CB1_INT | IER_CLR);
  			spin_unlock_irqrestore(&pmu_lock, flags);

  			break;
  		}
  	} while (1);
  }

  void

  pmu_resume(void)
  {
  	unsigned long flags;
  
  	if (!via || (pmu_suspended < 1))
  		return;
  
  	spin_lock_irqsave(&pmu_lock, flags);
  	pmu_suspended--;
  	if (pmu_suspended > 0) {
  		spin_unlock_irqrestore(&pmu_lock, flags);
  		return;
  	}
  	adb_int_pending = 1;

  	if (gpio_irq >= 0)
  		enable_irq(gpio_irq);
  	out_8(&via[IER], CB1_INT | IER_SET);
  	spin_unlock_irqrestore(&pmu_lock, flags);
  	pmu_poll();

  }
  
  /* Interrupt data could be the result data from an ADB cmd */

  static void

  pmu_handle_data(unsigned char *data, int len)

  {
  	unsigned char ints, pirq;
  	int i = 0;
  
  	asleep = 0;
  	if (drop_interrupts || len < 1) {
  		adb_int_pending = 0;
  		pmu_irq_stats[8]++;
  		return;
  	}
  
  	/* Get PMU interrupt mask */
  	ints = data[0];
  
  	/* Record zero interrupts for stats */
  	if (ints == 0)
  		pmu_irq_stats[9]++;
  
  	/* Hack to deal with ADB autopoll flag */
  	if (ints & PMU_INT_ADB)
  		ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL);
  
  next:
  
  	if (ints == 0) {
  		if (i > pmu_irq_stats[10])
  			pmu_irq_stats[10] = i;
  		return;
  	}
  
  	for (pirq = 0; pirq < 8; pirq++)
  		if (ints & (1 << pirq))
  			break;
  	pmu_irq_stats[pirq]++;
  	i++;
  	ints &= ~(1 << pirq);
  
  	/* Note: for some reason, we get an interrupt with len=1,
  	 * data[0]==0 after each normal ADB interrupt, at least
  	 * on the Pismo. Still investigating...  --BenH
  	 */
  	if ((1 << pirq) & PMU_INT_ADB) {
  		if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
  			struct adb_request *req = req_awaiting_reply;
  			if (req == 0) {
  				printk(KERN_ERR "PMU: extra ADB reply
  ");
  				return;
  			}
  			req_awaiting_reply = NULL;
  			if (len <= 2)
  				req->reply_len = 0;
  			else {
  				memcpy(req->reply, data + 1, len - 1);
  				req->reply_len = len - 1;
  			}
  			pmu_done(req);
  		} else {

  			if (len == 4 && data[1] == 0x2c) {
  				extern int xmon_wants_key, xmon_adb_keycode;
  				if (xmon_wants_key) {
  					xmon_adb_keycode = data[2];
  					return;
  				}
  			}

  #ifdef CONFIG_ADB
  			/*
  			 * XXX On the [23]400 the PMU gives us an up
  			 * event for keycodes 0x74 or 0x75 when the PC
  			 * card eject buttons are released, so we
  			 * ignore those events.
  			 */
  			if (!(pmu_kind == PMU_OHARE_BASED && len == 4
  			      && data[1] == 0x2c && data[3] == 0xff
  			      && (data[2] & ~1) == 0xf4))

  				adb_input(data+1, len-1, 1);

  #endif /* CONFIG_ADB */		
  		}
  	}
  	/* Sound/brightness button pressed */
  	else if ((1 << pirq) & PMU_INT_SNDBRT) {
  #ifdef CONFIG_PMAC_BACKLIGHT
  		if (len == 3)

  			pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4);
  #endif

  	}
  	/* Tick interrupt */
  	else if ((1 << pirq) & PMU_INT_TICK) {

  		/* Environement or tick interrupt, query batteries */
  		if (pmu_battery_count) {
  			if ((--query_batt_timer) == 0) {
  				query_battery_state();
  				query_batt_timer = BATTERY_POLLING_COUNT;
  			}
  		}
          }
  	else if ((1 << pirq) & PMU_INT_ENVIRONMENT) {
  		if (pmu_battery_count)
  			query_battery_state();
  		pmu_pass_intr(data, len);

  		/* len == 6 is probably a bad check. But how do I
  		 * know what PMU versions send what events here? */
  		if (len == 6) {
  			via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
  			via_pmu_event(PMU_EVT_LID, data[1]&1);
  		}

  	} else {
  	       pmu_pass_intr(data, len);

  	}
  	goto next;
  }

  static struct adb_request*

  pmu_sr_intr(void)

  {
  	struct adb_request *req;
  	int bite = 0;
  
  	if (via[B] & TREQ) {
  		printk(KERN_ERR "PMU: spurious SR intr (%x)
  ", via[B]);
  		out_8(&via[IFR], SR_INT);
  		return NULL;
  	}
  	/* The ack may not yet be low when we get the interrupt */
  	while ((in_8(&via[B]) & TACK) != 0)
  			;
  
  	/* if reading grab the byte, and reset the interrupt */
  	if (pmu_state == reading || pmu_state == reading_intr)
  		bite = in_8(&via[SR]);
  
  	/* reset TREQ and wait for TACK to go high */
  	out_8(&via[B], in_8(&via[B]) | TREQ);
  	wait_for_ack();
  
  	switch (pmu_state) {
  	case sending:
  		req = current_req;
  		if (data_len < 0) {
  			data_len = req->nbytes - 1;
  			send_byte(data_len);
  			break;
  		}
  		if (data_index <= data_len) {
  			send_byte(req->data[data_index++]);
  			break;
  		}
  		req->sent = 1;
  		data_len = pmu_data_len[req->data[0]][1];
  		if (data_len == 0) {
  			pmu_state = idle;
  			current_req = req->next;
  			if (req->reply_expected)
  				req_awaiting_reply = req;
  			else
  				return req;
  		} else {
  			pmu_state = reading;
  			data_index = 0;
  			reply_ptr = req->reply + req->reply_len;
  			recv_byte();
  		}
  		break;
  
  	case intack:
  		data_index = 0;
  		data_len = -1;
  		pmu_state = reading_intr;
  		reply_ptr = interrupt_data[int_data_last];
  		recv_byte();
  		if (gpio_irq >= 0 && !gpio_irq_enabled) {
  			enable_irq(gpio_irq);
  			gpio_irq_enabled = 1;
  		}
  		break;
  
  	case reading:
  	case reading_intr:
  		if (data_len == -1) {
  			data_len = bite;
  			if (bite > 32)
  				printk(KERN_ERR "PMU: bad reply len %d
  ", bite);
  		} else if (data_index < 32) {
  			reply_ptr[data_index++] = bite;
  		}
  		if (data_index < data_len) {
  			recv_byte();
  			break;
  		}
  
  		if (pmu_state == reading_intr) {
  			pmu_state = idle;
  			int_data_state[int_data_last] = int_data_ready;
  			interrupt_data_len[int_data_last] = data_len;
  		} else {
  			req = current_req;
  			/* 
  			 * For PMU sleep and freq change requests, we lock the

  			 * PMU until it's explicitly unlocked. This avoids any

  			 * spurrious event polling getting in
  			 */
  			current_req = req->next;
  			req->reply_len += data_index;
  			if (req->data[0] == PMU_SLEEP || req->data[0] == PMU_CPU_SPEED)
  				pmu_state = locked;
  			else
  				pmu_state = idle;
  			return req;
  		}
  		break;
  
  	default:
  		printk(KERN_ERR "via_pmu_interrupt: unknown state %d?
  ",
  		       pmu_state);
  	}
  	return NULL;
  }

  static irqreturn_t

  via_pmu_interrupt(int irq, void *arg)

  {
  	unsigned long flags;
  	int intr;
  	int nloop = 0;
  	int int_data = -1;
  	struct adb_request *req = NULL;
  	int handled = 0;
  
  	/* This is a bit brutal, we can probably do better */
  	spin_lock_irqsave(&pmu_lock, flags);
  	++disable_poll;
  	
  	for (;;) {
  		intr = in_8(&via[IFR]) & (SR_INT | CB1_INT);
  		if (intr == 0)
  			break;
  		handled = 1;
  		if (++nloop > 1000) {
  			printk(KERN_DEBUG "PMU: stuck in intr loop, "
  			       "intr=%x, ier=%x pmu_state=%d
  ",
  			       intr, in_8(&via[IER]), pmu_state);
  			break;
  		}
  		out_8(&via[IFR], intr);
  		if (intr & CB1_INT) {
  			adb_int_pending = 1;
  			pmu_irq_stats[0]++;
  		}
  		if (intr & SR_INT) {

  			req = pmu_sr_intr();

  			if (req)
  				break;
  		}
  	}
  
  recheck:
  	if (pmu_state == idle) {
  		if (adb_int_pending) {
  			if (int_data_state[0] == int_data_empty)
  				int_data_last = 0;
  			else if (int_data_state[1] == int_data_empty)
  				int_data_last = 1;
  			else
  				goto no_free_slot;
  			pmu_state = intack;
  			int_data_state[int_data_last] = int_data_fill;
  			/* Sounds safer to make sure ACK is high before writing.
  			 * This helped kill a problem with ADB and some iBooks
  			 */
  			wait_for_ack();
  			send_byte(PMU_INT_ACK);
  			adb_int_pending = 0;
  		} else if (current_req)
  			pmu_start();
  	}
  no_free_slot:			
  	/* Mark the oldest buffer for flushing */
  	if (int_data_state[!int_data_last] == int_data_ready) {
  		int_data_state[!int_data_last] = int_data_flush;
  		int_data = !int_data_last;
  	} else if (int_data_state[int_data_last] == int_data_ready) {
  		int_data_state[int_data_last] = int_data_flush;
  		int_data = int_data_last;
  	}
  	--disable_poll;
  	spin_unlock_irqrestore(&pmu_lock, flags);
  
  	/* Deal with completed PMU requests outside of the lock */
  	if (req) {
  		pmu_done(req);
  		req = NULL;
  	}
  		
  	/* Deal with interrupt datas outside of the lock */
  	if (int_data >= 0) {

  		pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data]);

  		spin_lock_irqsave(&pmu_lock, flags);
  		++disable_poll;
  		int_data_state[int_data] = int_data_empty;
  		int_data = -1;
  		goto recheck;
  	}
  
  	return IRQ_RETVAL(handled);
  }

  void

  pmu_unlock(void)
  {
  	unsigned long flags;
  
  	spin_lock_irqsave(&pmu_lock, flags);
  	if (pmu_state == locked)
  		pmu_state = idle;
  	adb_int_pending = 1;
  	spin_unlock_irqrestore(&pmu_lock, flags);
  }

  static irqreturn_t

  gpio1_interrupt(int irq, void *arg)

  {
  	unsigned long flags;
  
  	if ((in_8(gpio_reg + 0x9) & 0x02) == 0) {
  		spin_lock_irqsave(&pmu_lock, flags);
  		if (gpio_irq_enabled > 0) {
  			disable_irq_nosync(gpio_irq);
  			gpio_irq_enabled = 0;
  		}
  		pmu_irq_stats[1]++;
  		adb_int_pending = 1;
  		spin_unlock_irqrestore(&pmu_lock, flags);

  		via_pmu_interrupt(0, NULL);

  		return IRQ_HANDLED;
  	}
  	return IRQ_NONE;
  }

  void

  pmu_enable_irled(int on)
  {
  	struct adb_request req;
  
  	if (vias == NULL)
  		return ;
  	if (pmu_kind == PMU_KEYLARGO_BASED)
  		return ;
  
  	pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
  	    (on ? PMU_POW_ON : PMU_POW_OFF));
  	pmu_wait_complete(&req);
  }

  void

  pmu_restart(void)
  {
  	struct adb_request req;
  
  	if (via == NULL)
  		return;
  
  	local_irq_disable();
  
  	drop_interrupts = 1;
  	
  	if (pmu_kind != PMU_KEYLARGO_BASED) {
  		pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
  						PMU_INT_TICK );
  		while(!req.complete)
  			pmu_poll();
  	}
  
  	pmu_request(&req, NULL, 1, PMU_RESET);
  	pmu_wait_complete(&req);
  	for (;;)
  		;
  }

  void

  pmu_shutdown(void)
  {
  	struct adb_request req;
  
  	if (via == NULL)
  		return;
  
  	local_irq_disable();
  
  	drop_interrupts = 1;
  
  	if (pmu_kind != PMU_KEYLARGO_BASED) {
  		pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
  						PMU_INT_TICK );
  		pmu_wait_complete(&req);
  	} else {
  		/* Disable server mode on shutdown or we'll just
  		 * wake up again
  		 */
  		pmu_set_server_mode(0);
  	}
  
  	pmu_request(&req, NULL, 5, PMU_SHUTDOWN,
  		    'M', 'A', 'T', 'T');
  	pmu_wait_complete(&req);
  	for (;;)
  		;
  }
  
  int
  pmu_present(void)
  {
  	return via != 0;
  }

  #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)

  /*
   * Put the powerbook to sleep.
   */
   

  static u32 save_via[8];

  static void

  save_via_state(void)
  {
  	save_via[0] = in_8(&via[ANH]);
  	save_via[1] = in_8(&via[DIRA]);
  	save_via[2] = in_8(&via[B]);
  	save_via[3] = in_8(&via[DIRB]);
  	save_via[4] = in_8(&via[PCR]);
  	save_via[5] = in_8(&via[ACR]);
  	save_via[6] = in_8(&via[T1CL]);
  	save_via[7] = in_8(&via[T1CH]);
  }

  static void

  restore_via_state(void)
  {
  	out_8(&via[ANH], save_via[0]);
  	out_8(&via[DIRA], save_via[1]);
  	out_8(&via[B], save_via[2]);
  	out_8(&via[DIRB], save_via[3]);
  	out_8(&via[PCR], save_via[4]);
  	out_8(&via[ACR], save_via[5]);
  	out_8(&via[T1CL], save_via[6]);
  	out_8(&via[T1CH], save_via[7]);
  	out_8(&via[IER], IER_CLR | 0x7f);	/* disable all intrs */
  	out_8(&via[IFR], 0x7f);				/* clear IFR */
  	out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
  }

  #define	GRACKLE_PM	(1<<7)
  #define GRACKLE_DOZE	(1<<5)
  #define	GRACKLE_NAP	(1<<4)
  #define	GRACKLE_SLEEP	(1<<3)

  static int powerbook_sleep_grackle(void)

  {
  	unsigned long save_l2cr;
  	unsigned short pmcr1;
  	struct adb_request req;

  	struct pci_dev *grackle;

  	grackle = pci_get_bus_and_slot(0, 0);

  	if (!grackle)
  		return -ENODEV;

  	/* Turn off various things. Darwin does some retry tests here... */
  	pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
  	pmu_wait_complete(&req);
  	pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
  		PMU_POW_OFF|PMU_POW_BACKLIGHT|PMU_POW_IRLED|PMU_POW_MEDIABAY);
  	pmu_wait_complete(&req);
  
  	/* For 750, save backside cache setting and disable it */
  	save_l2cr = _get_L2CR();	/* (returns -1 if not available) */
  
  	if (!__fake_sleep) {
  		/* Ask the PMU to put us to sleep */
  		pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
  		pmu_wait_complete(&req);
  	}
  
  	/* The VIA is supposed not to be restored correctly*/
  	save_via_state();
  	/* We shut down some HW */
  	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
  
  	pci_read_config_word(grackle, 0x70, &pmcr1);
  	/* Apparently, MacOS uses NAP mode for Grackle ??? */
  	pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP); 
  	pmcr1 |= GRACKLE_PM|GRACKLE_NAP;
  	pci_write_config_word(grackle, 0x70, pmcr1);
  
  	/* Call low-level ASM sleep handler */
  	if (__fake_sleep)
  		mdelay(5000);
  	else
  		low_sleep_handler();
  
  	/* We're awake again, stop grackle PM */
  	pci_read_config_word(grackle, 0x70, &pmcr1);
  	pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP); 
  	pci_write_config_word(grackle, 0x70, pmcr1);

  	pci_dev_put(grackle);

  	/* Make sure the PMU is idle */
  	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
  	restore_via_state();
  	
  	/* Restore L2 cache */
  	if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
   		_set_L2CR(save_l2cr);
  	
  	/* Restore userland MMU context */

  	switch_mmu_context(NULL, current->active_mm, NULL);

  
  	/* Power things up */
  	pmu_unlock();
  	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
  	pmu_wait_complete(&req);
  	pmu_request(&req, NULL, 2, PMU_POWER_CTRL0,
  			PMU_POW0_ON|PMU_POW0_HARD_DRIVE);
  	pmu_wait_complete(&req);
  	pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
  			PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
  	pmu_wait_complete(&req);

  	return 0;
  }

  static int

  powerbook_sleep_Core99(void)
  {
  	unsigned long save_l2cr;
  	unsigned long save_l3cr;
  	struct adb_request req;

  	
  	if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
  		printk(KERN_ERR "Sleep mode not supported on this machine
  ");
  		return -ENOSYS;
  	}
  
  	if (num_online_cpus() > 1 || cpu_is_offline(0))
  		return -EAGAIN;

  	/* Stop environment and ADB interrupts */
  	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
  	pmu_wait_complete(&req);

  
  	/* Tell PMU what events will wake us up */
  	pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
  		0xff, 0xff);
  	pmu_wait_complete(&req);
  	pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_SET_WAKEUP_EVENTS,
  		0, PMU_PWR_WAKEUP_KEY |
  		(option_lid_wakeup ? PMU_PWR_WAKEUP_LID_OPEN : 0));
  	pmu_wait_complete(&req);
  
  	/* Save the state of the L2 and L3 caches */
  	save_l3cr = _get_L3CR();	/* (returns -1 if not available) */
  	save_l2cr = _get_L2CR();	/* (returns -1 if not available) */
  
  	if (!__fake_sleep) {
  		/* Ask the PMU to put us to sleep */
  		pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
  		pmu_wait_complete(&req);
  	}
  
  	/* The VIA is supposed not to be restored correctly*/
  	save_via_state();
  
  	/* Shut down various ASICs. There's a chance that we can no longer
  	 * talk to the PMU after this, so I moved it to _after_ sending the
  	 * sleep command to it. Still need to be checked.
  	 */
  	pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
  
  	/* Call low-level ASM sleep handler */
  	if (__fake_sleep)
  		mdelay(5000);
  	else
  		low_sleep_handler();
  
  	/* Restore Apple core ASICs state */
  	pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
  
  	/* Restore VIA */
  	restore_via_state();

  	/* tweak LPJ before cpufreq is there */
  	loops_per_jiffy *= 2;

  	/* Restore video */
  	pmac_call_early_video_resume();
  
  	/* Restore L2 cache */
  	if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
   		_set_L2CR(save_l2cr);
  	/* Restore L3 cache */
  	if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
   		_set_L3CR(save_l3cr);
  	
  	/* Restore userland MMU context */

  	switch_mmu_context(NULL, current->active_mm, NULL);

  
  	/* Tell PMU we are ready */
  	pmu_unlock();
  	pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
  	pmu_wait_complete(&req);
  	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
  	pmu_wait_complete(&req);

  	/* Restore LPJ, cpufreq will adjust the cpu frequency */
  	loops_per_jiffy /= 2;

  	return 0;
  }
  
  #define PB3400_MEM_CTRL		0xf8000000
  #define PB3400_MEM_CTRL_SLEEP	0x70

  static void __iomem *pb3400_mem_ctrl;
  
  static void powerbook_sleep_init_3400(void)
  {
  	/* map in the memory controller registers */
  	pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
  	if (pb3400_mem_ctrl == NULL)
  		printk(KERN_WARNING "ioremap failed: sleep won't be possible");
  }
  
  static int powerbook_sleep_3400(void)

  {

  	int i, x;

  	unsigned int hid0;

  	unsigned long msr;

  	struct adb_request sleep_req;

  	unsigned int __iomem *mem_ctrl_sleep;

  	if (pb3400_mem_ctrl == NULL)

  		return -ENOMEM;

  	mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP;

  	/* Set the memory controller to keep the memory refreshed
  	   while we're asleep */
  	for (i = 0x403f; i >= 0x4000; --i) {
  		out_be32(mem_ctrl_sleep, i);
  		do {
  			x = (in_be32(mem_ctrl_sleep) >> 16) & 0x3ff;
  		} while (x == 0);
  		if (x >= 0x100)
  			break;
  	}
  
  	/* Ask the PMU to put us to sleep */
  	pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');

  	pmu_wait_complete(&sleep_req);
  	pmu_unlock();

  	pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);

  	asleep = 1;
  
  	/* Put the CPU into sleep mode */

  	hid0 = mfspr(SPRN_HID0);

  	hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;

  	mtspr(SPRN_HID0, hid0);

  	local_irq_enable();
  	msr = mfmsr() | MSR_POW;
  	while (asleep) {
  		mb();
  		mtmsr(msr);
  		isync();
  	}
  	local_irq_disable();

  
  	/* OK, we're awake again, start restoring things */
  	out_be32(mem_ctrl_sleep, 0x3f);

  	pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);

  	return 0;
  }

  #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */

  /*
   * Support for /dev/pmu device
   */
  #define RB_SIZE		0x10
  struct pmu_private {
  	struct list_head list;
  	int	rb_get;
  	int	rb_put;
  	struct rb_entry {
  		unsigned short len;
  		unsigned char data[16];
  	}	rb_buf[RB_SIZE];
  	wait_queue_head_t wait;
  	spinlock_t lock;
  #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
  	int	backlight_locker;

  #endif

  };
  
  static LIST_HEAD(all_pmu_pvt);

  static DEFINE_SPINLOCK(all_pvt_lock);

  static void

  pmu_pass_intr(unsigned char *data, int len)
  {
  	struct pmu_private *pp;
  	struct list_head *list;
  	int i;
  	unsigned long flags;
  
  	if (len > sizeof(pp->rb_buf[0].data))
  		len = sizeof(pp->rb_buf[0].data);
  	spin_lock_irqsave(&all_pvt_lock, flags);
  	for (list = &all_pmu_pvt; (list = list->next) != &all_pmu_pvt; ) {
  		pp = list_entry(list, struct pmu_private, list);
  		spin_lock(&pp->lock);
  		i = pp->rb_put + 1;
  		if (i >= RB_SIZE)
  			i = 0;
  		if (i != pp->rb_get) {
  			struct rb_entry *rp = &pp->rb_buf[pp->rb_put];
  			rp->len = len;
  			memcpy(rp->data, data, len);
  			pp->rb_put = i;
  			wake_up_interruptible(&pp->wait);
  		}
  		spin_unlock(&pp->lock);
  	}
  	spin_unlock_irqrestore(&all_pvt_lock, flags);
  }

  static int

  pmu_open(struct inode *inode, struct file *file)
  {
  	struct pmu_private *pp;
  	unsigned long flags;
  
  	pp = kmalloc(sizeof(struct pmu_private), GFP_KERNEL);
  	if (pp == 0)
  		return -ENOMEM;
  	pp->rb_get = pp->rb_put = 0;
  	spin_lock_init(&pp->lock);
  	init_waitqueue_head(&pp->wait);

  	mutex_lock(&pmu_info_proc_mutex);

  	spin_lock_irqsave(&all_pvt_lock, flags);
  #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
  	pp->backlight_locker = 0;

  #endif

  	list_add(&pp->list, &all_pmu_pvt);
  	spin_unlock_irqrestore(&all_pvt_lock, flags);
  	file->private_data = pp;

  	mutex_unlock(&pmu_info_proc_mutex);

  	return 0;
  }

  static ssize_t 

  pmu_read(struct file *file, char __user *buf,
  			size_t count, loff_t *ppos)
  {
  	struct pmu_private *pp = file->private_data;
  	DECLARE_WAITQUEUE(wait, current);
  	unsigned long flags;
  	int ret = 0;
  
  	if (count < 1 || pp == 0)
  		return -EINVAL;
  	if (!access_ok(VERIFY_WRITE, buf, count))
  		return -EFAULT;
  
  	spin_lock_irqsave(&pp->lock, flags);
  	add_wait_queue(&pp->wait, &wait);

  	set_current_state(TASK_INTERRUPTIBLE);

  
  	for (;;) {
  		ret = -EAGAIN;
  		if (pp->rb_get != pp->rb_put) {
  			int i = pp->rb_get;
  			struct rb_entry *rp = &pp->rb_buf[i];
  			ret = rp->len;
  			spin_unlock_irqrestore(&pp->lock, flags);
  			if (ret > count)
  				ret = count;
  			if (ret > 0 && copy_to_user(buf, rp->data, ret))
  				ret = -EFAULT;
  			if (++i >= RB_SIZE)
  				i = 0;
  			spin_lock_irqsave(&pp->lock, flags);
  			pp->rb_get = i;
  		}
  		if (ret >= 0)
  			break;
  		if (file->f_flags & O_NONBLOCK)
  			break;
  		ret = -ERESTARTSYS;
  		if (signal_pending(current))
  			break;
  		spin_unlock_irqrestore(&pp->lock, flags);
  		schedule();
  		spin_lock_irqsave(&pp->lock, flags);
  	}

  	__set_current_state(TASK_RUNNING);

  	remove_wait_queue(&pp->wait, &wait);
  	spin_unlock_irqrestore(&pp->lock, flags);
  	
  	return ret;
  }

  static ssize_t

  pmu_write(struct file *file, const char __user *buf,
  			 size_t count, loff_t *ppos)
  {
  	return 0;
  }

  static unsigned int

  pmu_fpoll(struct file *filp, poll_table *wait)
  {
  	struct pmu_private *pp = filp->private_data;
  	unsigned int mask = 0;
  	unsigned long flags;
  	
  	if (pp == 0)
  		return 0;
  	poll_wait(filp, &pp->wait, wait);
  	spin_lock_irqsave(&pp->lock, flags);
  	if (pp->rb_get != pp->rb_put)
  		mask |= POLLIN;
  	spin_unlock_irqrestore(&pp->lock, flags);
  	return mask;
  }

  static int

  pmu_release(struct inode *inode, struct file *file)
  {
  	struct pmu_private *pp = file->private_data;
  	unsigned long flags;

  	if (pp != 0) {
  		file->private_data = NULL;
  		spin_lock_irqsave(&all_pvt_lock, flags);
  		list_del(&pp->list);
  		spin_unlock_irqrestore(&all_pvt_lock, flags);

  #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)

  		if (pp->backlight_locker)
  			pmac_backlight_enable();
  #endif

  		kfree(pp);
  	}

  	return 0;
  }

  #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)

  static void pmac_suspend_disable_irqs(void)

  {

  	/* Call platform functions marked "on sleep" */
  	pmac_pfunc_i2c_suspend();
  	pmac_pfunc_base_suspend();

  }
  
  static int powerbook_sleep(suspend_state_t state)
  {
  	int error = 0;
  
  	/* Wait for completion of async requests */
  	while (!batt_req.complete)
  		pmu_poll();
  
  	/* Giveup the lazy FPU & vec so we don't have to back them
  	 * up from the low level code
  	 */
  	enable_kernel_fp();
  
  #ifdef CONFIG_ALTIVEC
  	if (cpu_has_feature(CPU_FTR_ALTIVEC))
  		enable_kernel_altivec();
  #endif /* CONFIG_ALTIVEC */
  
  	switch (pmu_kind) {
  	case PMU_OHARE_BASED:
  		error = powerbook_sleep_3400();
  		break;
  	case PMU_HEATHROW_BASED:
  	case PMU_PADDINGTON_BASED:
  		error = powerbook_sleep_grackle();
  		break;
  	case PMU_KEYLARGO_BASED:
  		error = powerbook_sleep_Core99();
  		break;
  	default:
  		return -ENOSYS;
  	}
  
  	if (error)
  		return error;
  
  	mdelay(100);

  	return 0;
  }

  static void pmac_suspend_enable_irqs(void)

  {
  	/* Force a poll of ADB interrupts */
  	adb_int_pending = 1;
  	via_pmu_interrupt(0, NULL);

  	mdelay(10);

  
  	/* Call platform functions marked "on wake" */
  	pmac_pfunc_base_resume();
  	pmac_pfunc_i2c_resume();
  }
  
  static int pmu_sleep_valid(suspend_state_t state)
  {
  	return state == PM_SUSPEND_MEM
  		&& (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
  }

  static const struct platform_suspend_ops pmu_pm_ops = {

  	.enter = powerbook_sleep,
  	.valid = pmu_sleep_valid,
  };
  
  static int register_pmu_pm_ops(void)
  {

  	if (pmu_kind == PMU_OHARE_BASED)
  		powerbook_sleep_init_3400();
  	ppc_md.suspend_disable_irqs = pmac_suspend_disable_irqs;
  	ppc_md.suspend_enable_irqs = pmac_suspend_enable_irqs;

  	suspend_set_ops(&pmu_pm_ops);
  
  	return 0;
  }
  
  device_initcall(register_pmu_pm_ops);
  #endif

  static int pmu_ioctl(struct file *filp,

  		     u_int cmd, u_long arg)
  {

  	__u32 __user *argp = (__u32 __user *)arg;

  	int error = -EINVAL;

  
  	switch (cmd) {
  	case PMU_IOC_SLEEP:
  		if (!capable(CAP_SYS_ADMIN))
  			return -EACCES;

  		return pm_suspend(PM_SUSPEND_MEM);

  	case PMU_IOC_CAN_SLEEP:

  		if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0)

  			return put_user(0, argp);
  		else
  			return put_user(1, argp);

  #ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
  	/* Compatibility ioctl's for backlight */

  	case PMU_IOC_GET_BACKLIGHT:

  	{
  		int brightness;

  		brightness = pmac_backlight_get_legacy_brightness();
  		if (brightness < 0)
  			return brightness;
  		else
  			return put_user(brightness, argp);
  
  	}

  	case PMU_IOC_SET_BACKLIGHT:
  	{

  		int brightness;

  		error = get_user(brightness, argp);
  		if (error)
  			return error;
  
  		return pmac_backlight_set_legacy_brightness(brightness);

  	}
  #ifdef CONFIG_INPUT_ADBHID
  	case PMU_IOC_GRAB_BACKLIGHT: {

  		struct pmu_private *pp = filp->private_data;

  		if (pp->backlight_locker)
  			return 0;

  		pp->backlight_locker = 1;

  		pmac_backlight_disable();

  		return 0;
  	}
  #endif /* CONFIG_INPUT_ADBHID */

  #endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */

  	case PMU_IOC_GET_MODEL:
  	    	return put_user(pmu_kind, argp);
  	case PMU_IOC_HAS_ADB:
  		return put_user(pmu_has_adb, argp);
  	}

  	return error;

  }

  static long pmu_unlocked_ioctl(struct file *filp,
  			       u_int cmd, u_long arg)
  {
  	int ret;

  	mutex_lock(&pmu_info_proc_mutex);

  	ret = pmu_ioctl(filp, cmd, arg);

  	mutex_unlock(&pmu_info_proc_mutex);

  
  	return ret;
  }

  #ifdef CONFIG_COMPAT
  #define PMU_IOC_GET_BACKLIGHT32	_IOR('B', 1, compat_size_t)
  #define PMU_IOC_SET_BACKLIGHT32	_IOW('B', 2, compat_size_t)
  #define PMU_IOC_GET_MODEL32	_IOR('B', 3, compat_size_t)
  #define PMU_IOC_HAS_ADB32	_IOR('B', 4, compat_size_t)
  #define PMU_IOC_CAN_SLEEP32	_IOR('B', 5, compat_size_t)
  #define PMU_IOC_GRAB_BACKLIGHT32 _IOR('B', 6, compat_size_t)
  
  static long compat_pmu_ioctl (struct file *filp, u_int cmd, u_long arg)
  {
  	switch (cmd) {
  	case PMU_IOC_SLEEP:
  		break;
  	case PMU_IOC_GET_BACKLIGHT32:
  		cmd = PMU_IOC_GET_BACKLIGHT;
  		break;
  	case PMU_IOC_SET_BACKLIGHT32:
  		cmd = PMU_IOC_SET_BACKLIGHT;
  		break;
  	case PMU_IOC_GET_MODEL32:
  		cmd = PMU_IOC_GET_MODEL;
  		break;
  	case PMU_IOC_HAS_ADB32:
  		cmd = PMU_IOC_HAS_ADB;
  		break;
  	case PMU_IOC_CAN_SLEEP32:
  		cmd = PMU_IOC_CAN_SLEEP;
  		break;
  	case PMU_IOC_GRAB_BACKLIGHT32:
  		cmd = PMU_IOC_GRAB_BACKLIGHT;
  		break;
  	default:
  		return -ENOIOCTLCMD;
  	}
  	return pmu_unlocked_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
  }
  #endif

  static const struct file_operations pmu_device_fops = {

  	.read		= pmu_read,
  	.write		= pmu_write,
  	.poll		= pmu_fpoll,

  	.unlocked_ioctl	= pmu_unlocked_ioctl,

  #ifdef CONFIG_COMPAT
  	.compat_ioctl	= compat_pmu_ioctl,
  #endif

  	.open		= pmu_open,
  	.release	= pmu_release,

  	.llseek		= noop_llseek,

  };

  static struct miscdevice pmu_device = {

  	PMU_MINOR, "pmu", &pmu_device_fops
  };

  static int pmu_device_init(void)

  {
  	if (!via)

  		return 0;

  	if (misc_register(&pmu_device) < 0)
  		printk(KERN_ERR "via-pmu: cannot register misc device.
  ");

  	return 0;

  }

  device_initcall(pmu_device_init);

  
  #ifdef DEBUG_SLEEP

  static inline void 

  polled_handshake(volatile unsigned char __iomem *via)
  {
  	via[B] &= ~TREQ; eieio();
  	while ((via[B] & TACK) != 0)
  		;
  	via[B] |= TREQ; eieio();
  	while ((via[B] & TACK) == 0)
  		;
  }

  static inline void 

  polled_send_byte(volatile unsigned char __iomem *via, int x)
  {
  	via[ACR] |= SR_OUT | SR_EXT; eieio();
  	via[SR] = x; eieio();
  	polled_handshake(via);
  }

  static inline int

  polled_recv_byte(volatile unsigned char __iomem *via)
  {
  	int x;
  
  	via[ACR] = (via[ACR] & ~SR_OUT) | SR_EXT; eieio();
  	x = via[SR]; eieio();
  	polled_handshake(via);
  	x = via[SR]; eieio();
  	return x;
  }

  int

  pmu_polled_request(struct adb_request *req)
  {
  	unsigned long flags;
  	int i, l, c;
  	volatile unsigned char __iomem *v = via;
  
  	req->complete = 1;
  	c = req->data[0];
  	l = pmu_data_len[c][0];
  	if (l >= 0 && req->nbytes != l + 1)
  		return -EINVAL;
  
  	local_irq_save(flags);
  	while (pmu_state != idle)
  		pmu_poll();
  
  	while ((via[B] & TACK) == 0)
  		;
  	polled_send_byte(v, c);
  	if (l < 0) {
  		l = req->nbytes - 1;
  		polled_send_byte(v, l);
  	}
  	for (i = 1; i <= l; ++i)
  		polled_send_byte(v, req->data[i]);
  
  	l = pmu_data_len[c][1];
  	if (l < 0)
  		l = polled_recv_byte(v);
  	for (i = 0; i < l; ++i)
  		req->reply[i + req->reply_len] = polled_recv_byte(v);
  
  	if (req->done)
  		(*req->done)(req);
  
  	local_irq_restore(flags);
  	return 0;
  }

  /* N.B. This doesn't work on the 3400 */
  void pmu_blink(int n)
  {
  	struct adb_request req;

  	memset(&req, 0, sizeof(req));

  	for (; n > 0; --n) {
  		req.nbytes = 4;
  		req.done = NULL;
  		req.data[0] = 0xee;
  		req.data[1] = 4;
  		req.data[2] = 0;
  		req.data[3] = 1;
  		req.reply[0] = ADB_RET_OK;
  		req.reply_len = 1;
  		req.reply_expected = 0;
  		pmu_polled_request(&req);
  		mdelay(50);
  		req.nbytes = 4;
  		req.done = NULL;
  		req.data[0] = 0xee;
  		req.data[1] = 4;
  		req.data[2] = 0;
  		req.data[3] = 0;
  		req.reply[0] = ADB_RET_OK;
  		req.reply_len = 1;
  		req.reply_expected = 0;
  		pmu_polled_request(&req);
  		mdelay(50);
  	}
  	mdelay(50);
  }
  #endif /* DEBUG_SLEEP */

  #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)

  int pmu_sys_suspended;

  static int pmu_syscore_suspend(void)

  {

  	/* Suspend PMU event interrupts */

  	pmu_suspend();

  	pmu_sys_suspended = 1;

  
  #ifdef CONFIG_PMAC_BACKLIGHT
  	/* Tell backlight code not to muck around with the chip anymore */
  	pmu_backlight_set_sleep(1);
  #endif

  	return 0;
  }

  static void pmu_syscore_resume(void)

  {
  	struct adb_request req;
  
  	if (!pmu_sys_suspended)

  		return;

  
  	/* Tell PMU we are ready */
  	pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
  	pmu_wait_complete(&req);

  #ifdef CONFIG_PMAC_BACKLIGHT
  	/* Tell backlight code it can use the chip again */
  	pmu_backlight_set_sleep(0);
  #endif

  	/* Resume PMU event interrupts */
  	pmu_resume();

  	pmu_sys_suspended = 0;

  }

  static struct syscore_ops pmu_syscore_ops = {
  	.suspend = pmu_syscore_suspend,
  	.resume = pmu_syscore_resume,

  };

  static int pmu_syscore_register(void)

  {

  	register_syscore_ops(&pmu_syscore_ops);

  	return 0;
  }

  subsys_initcall(pmu_syscore_register);
  #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */

  
  EXPORT_SYMBOL(pmu_request);

  EXPORT_SYMBOL(pmu_queue_request);

  EXPORT_SYMBOL(pmu_poll);
  EXPORT_SYMBOL(pmu_poll_adb);
  EXPORT_SYMBOL(pmu_wait_complete);
  EXPORT_SYMBOL(pmu_suspend);
  EXPORT_SYMBOL(pmu_resume);
  EXPORT_SYMBOL(pmu_unlock);

  #if defined(CONFIG_PPC32)

  EXPORT_SYMBOL(pmu_enable_irled);
  EXPORT_SYMBOL(pmu_battery_count);
  EXPORT_SYMBOL(pmu_batteries);
  EXPORT_SYMBOL(pmu_power_flags);

  #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */