/*
   *	intel TCO vendor specific watchdog driver support
   *

   *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.

   *
   *	This program is free software; you can redistribute it and/or
   *	modify it under the terms of the GNU General Public License
   *	as published by the Free Software Foundation; either version
   *	2 of the License, or (at your option) any later version.
   *
   *	Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
   *	provide warranty for any of this software. This material is
   *	provided "AS-IS" and at no charge.
   */
  
  /*
   *	Includes, defines, variables, module parameters, ...
   */

  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

  /* Module and version information */

  #define DRV_NAME	"iTCO_vendor_support"

  #define DRV_VERSION	"1.04"

  
  /* Includes */
  #include <linux/module.h>		/* For module specific items */
  #include <linux/moduleparam.h>		/* For new moduleparam's */
  #include <linux/types.h>		/* For standard types (like size_t) */
  #include <linux/errno.h>		/* For the -ENODEV/... values */
  #include <linux/kernel.h>		/* For printk/panic/... */
  #include <linux/init.h>			/* For __init/__exit/... */
  #include <linux/ioport.h>		/* For io-port access */

  #include <linux/io.h>			/* For inb/outb/... */
  
  #include "iTCO_vendor.h"

  /* List of vendor support modes */

  /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
  #define SUPERMICRO_OLD_BOARD	1
  /* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
  #define SUPERMICRO_NEW_BOARD	2

  /* Broken BIOS */
  #define BROKEN_BIOS		911

  static int vendorsupport;

  module_param(vendorsupport, int, 0);

  MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="

  			"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, "
  							"911=Broken SMI BIOS");

  
  /*
   *	Vendor Specific Support
   */
  
  /*
   *	Vendor Support: 1
   *	Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE
   *	iTCO chipset: ICH2
   *
   *	Code contributed by: R. Seretny <lkpatches@paypc.com>
   *	Documentation obtained by R. Seretny from SuperMicro Technical Support
   *
   *	To enable Watchdog function:
   *	    BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes
   *	    This setting enables SMI to clear the watchdog expired flag.
   *	    If BIOS or CPU fail which may cause SMI hang, then system will
   *	    reboot. When application starts to use watchdog function,
   *	    application has to take over the control from SMI.
   *
   *	    For P3TSSE, J36 jumper needs to be removed to enable the Watchdog
   *	    function.
   *
   *	    Note: The system will reboot when Expire Flag is set TWICE.
   *	    So, if the watchdog timer is 20 seconds, then the maximum hang
   *	    time is about 40 seconds, and the minimum hang time is about
   *	    20.6 seconds.
   */

  static void supermicro_old_pre_start(struct resource *smires)

  {
  	unsigned long val32;
  
  	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */

  	val32 = inl(smires->start);

  	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */

  	outl(val32, smires->start);	/* Needed to activate watchdog */

  }

  static void supermicro_old_pre_stop(struct resource *smires)

  {
  	unsigned long val32;
  
  	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */

  	val32 = inl(smires->start);

  	val32 |= 0x00002000;	/* Turn on SMI clearing watchdog */

  	outl(val32, smires->start);	/* Needed to deactivate watchdog */

  }

  /*
   *	Vendor Support: 2
   *	Board: Super Micro Computer Inc. P4SBx, P4DPx
   *	iTCO chipset: ICH4
   *
   *	Code contributed by: R. Seretny <lkpatches@paypc.com>
   *	Documentation obtained by R. Seretny from SuperMicro Technical Support
   *
   *	To enable Watchdog function:
   *	 1. BIOS
   *	  For P4SBx:
   *	  BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
   *	  For P4DPx:
   *	  BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
   *	 This setting enables or disables Watchdog function. When enabled, the

   *	 default watchdog timer is set to be 5 minutes (about 4m35s). It is

   *	 enough to load and run the OS. The application (service or driver) has
   *	 to take over the control once OS is running up and before watchdog
   *	 expires.
   *
   *	 2. JUMPER
   *	  For P4SBx: JP39
   *	  For P4DPx: JP37
   *	  This jumper is used for safety.  Closed is enabled. This jumper
   *	  prevents user enables watchdog in BIOS by accident.
   *
   *	 To enable Watch Dog function, both BIOS and JUMPER must be enabled.
   *
   *	The documentation lists motherboards P4SBx and P4DPx series as of
   *	20-March-2002. However, this code works flawlessly with much newer
   *	motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
   *
   *	The original iTCO driver as written does not actually reset the
   *	watchdog timer on these machines, as a result they reboot after five
   *	minutes.
   *
   *	NOTE: You may leave the Watchdog function disabled in the SuperMicro
   *	BIOS to avoid a "boot-race"... This driver will enable watchdog
   *	functionality even if it's disabled in the BIOS once the /dev/watchdog
   *	file is opened.
   */
  
  /* I/O Port's */

  #define SM_REGINDEX	0x2e	/* SuperMicro ICH4+ Register Index */
  #define SM_DATAIO	0x2f	/* SuperMicro ICH4+ Register Data I/O */

  
  /* Control Register's */

  #define SM_CTLPAGESW	0x07	/* SuperMicro ICH4+ Control Page Switch */
  #define SM_CTLPAGE	0x08	/* SuperMicro ICH4+ Control Page Num */

  #define SM_WATCHENABLE	0x30	/* Watchdog enable: Bit 0: 0=off, 1=on */

  #define SM_WATCHPAGE	0x87	/* Watchdog unlock control page */

  #define SM_ENDWATCH	0xAA	/* Watchdog lock control page */

  #define SM_COUNTMODE	0xf5	/* Watchdog count mode select */
  				/* (Bit 3: 0 = seconds, 1 = minutes */

  #define SM_WATCHTIMER	0xf6	/* 8-bits, Watchdog timer counter (RW) */

  #define SM_RESETCONTROL	0xf7	/* Watchdog reset control */
  				/* Bit 6: timer is reset by kbd interrupt */
  				/* Bit 7: timer is reset by mouse interrupt */

  
  static void supermicro_new_unlock_watchdog(void)
  {

  	/* Write 0x87 to port 0x2e twice */

  	outb(SM_WATCHPAGE, SM_REGINDEX);

  	outb(SM_WATCHPAGE, SM_REGINDEX);
  	/* Switch to watchdog control page */
  	outb(SM_CTLPAGESW, SM_REGINDEX);

  	outb(SM_CTLPAGE, SM_DATAIO);
  }
  
  static void supermicro_new_lock_watchdog(void)
  {
  	outb(SM_ENDWATCH, SM_REGINDEX);
  }
  
  static void supermicro_new_pre_start(unsigned int heartbeat)
  {
  	unsigned int val;
  
  	supermicro_new_unlock_watchdog();
  
  	/* Watchdog timer setting needs to be in seconds*/
  	outb(SM_COUNTMODE, SM_REGINDEX);
  	val = inb(SM_DATAIO);
  	val &= 0xF7;
  	outb(val, SM_DATAIO);
  
  	/* Write heartbeat interval to WDOG */

  	outb(SM_WATCHTIMER, SM_REGINDEX);

  	outb((heartbeat & 255), SM_DATAIO);
  
  	/* Make sure keyboard/mouse interrupts don't interfere */
  	outb(SM_RESETCONTROL, SM_REGINDEX);
  	val = inb(SM_DATAIO);
  	val &= 0x3f;
  	outb(val, SM_DATAIO);
  
  	/* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
  	outb(SM_WATCHENABLE, SM_REGINDEX);
  	val = inb(SM_DATAIO);
  	val |= 0x01;
  	outb(val, SM_DATAIO);
  
  	supermicro_new_lock_watchdog();
  }
  
  static void supermicro_new_pre_stop(void)
  {
  	unsigned int val;
  
  	supermicro_new_unlock_watchdog();
  
  	/* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
  	outb(SM_WATCHENABLE, SM_REGINDEX);
  	val = inb(SM_DATAIO);
  	val &= 0xFE;
  	outb(val, SM_DATAIO);
  
  	supermicro_new_lock_watchdog();
  }
  
  static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
  {
  	supermicro_new_unlock_watchdog();
  
  	/* reset watchdog timeout to heartveat value */
  	outb(SM_WATCHTIMER, SM_REGINDEX);
  	outb((heartbeat & 255), SM_DATAIO);
  
  	supermicro_new_lock_watchdog();
  }
  
  /*

   *	Vendor Support: 911
   *	Board: Some Intel ICHx based motherboards
   *	iTCO chipset: ICH7+
   *
   *	Some Intel motherboards have a broken BIOS implementation: i.e.
   *	the SMI handler clear's the TIMEOUT bit in the TC01_STS register
   *	and does not reload the time. Thus the TCO watchdog does not reboot
   *	the system.
   *
   *	These are the conclusions of Andriy Gapon <avg@icyb.net.ua> after
   *	debugging: the SMI handler is quite simple - it tests value in
   *	TCO1_CNT against 0x800, i.e. checks TCO_TMR_HLT. If the bit is set
   *	the handler goes into an infinite loop, apparently to allow the
   *	second timeout and reboot. Otherwise it simply clears TIMEOUT bit
   *	in TCO1_STS and that's it.
   *	So the logic seems to be reversed, because it is hard to see how
   *	TIMEOUT can get set to 1 and SMI generated when TCO_TMR_HLT is set
   *	(other than a transitional effect).
   *
   *	The only fix found to get the motherboard(s) to reboot is to put
   *	the glb_smi_en bit to 0. This is a dirty hack that bypasses the
   *	broken code by disabling Global SMI.
   *
   *	WARNING: globally disabling SMI could possibly lead to dramatic
   *	problems, especially on laptops! I.e. various ACPI things where
   *	SMI is used for communication between OS and firmware.
   *
   *	Don't use this fix if you don't need to!!!
   */

  static void broken_bios_start(struct resource *smires)

  {
  	unsigned long val32;

  	val32 = inl(smires->start);

  	/* Bit 13: TCO_EN     -> 0 = Disables TCO logic generating an SMI#
  	   Bit  0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH. */
  	val32 &= 0xffffdffe;

  	outl(val32, smires->start);

  }

  static void broken_bios_stop(struct resource *smires)

  {
  	unsigned long val32;

  	val32 = inl(smires->start);

  	/* Bit 13: TCO_EN     -> 1 = Enables TCO logic generating an SMI#
  	   Bit  0: GBL_SMI_EN -> 1 = Turn global SMI on again. */
  	val32 |= 0x00002001;

  	outl(val32, smires->start);

  }
  
  /*

   *	Generic Support Functions
   */

  void iTCO_vendor_pre_start(struct resource *smires,

  			   unsigned int heartbeat)
  {

  	switch (vendorsupport) {
  	case SUPERMICRO_OLD_BOARD:

  		supermicro_old_pre_start(smires);

  		break;
  	case SUPERMICRO_NEW_BOARD:

  		supermicro_new_pre_start(heartbeat);

  		break;
  	case BROKEN_BIOS:

  		broken_bios_start(smires);

  		break;
  	}

  }
  EXPORT_SYMBOL(iTCO_vendor_pre_start);

  void iTCO_vendor_pre_stop(struct resource *smires)

  {

  	switch (vendorsupport) {
  	case SUPERMICRO_OLD_BOARD:

  		supermicro_old_pre_stop(smires);

  		break;
  	case SUPERMICRO_NEW_BOARD:

  		supermicro_new_pre_stop();

  		break;
  	case BROKEN_BIOS:

  		broken_bios_stop(smires);

  		break;
  	}

  }
  EXPORT_SYMBOL(iTCO_vendor_pre_stop);

  void iTCO_vendor_pre_keepalive(struct resource *smires, unsigned int heartbeat)

  {

  	if (vendorsupport == SUPERMICRO_NEW_BOARD)

  		supermicro_new_pre_set_heartbeat(heartbeat);
  }
  EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
  
  void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
  {
  	if (vendorsupport == SUPERMICRO_NEW_BOARD)
  		supermicro_new_pre_set_heartbeat(heartbeat);
  }
  EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
  
  int iTCO_vendor_check_noreboot_on(void)
  {

  	switch (vendorsupport) {

  	case SUPERMICRO_OLD_BOARD:
  		return 0;
  	default:
  		return 1;
  	}
  }
  EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
  
  static int __init iTCO_vendor_init_module(void)
  {

  	pr_info("vendor-support=%d
  ", vendorsupport);

  	return 0;
  }
  
  static void __exit iTCO_vendor_exit_module(void)
  {

  	pr_info("Module Unloaded
  ");

  }
  
  module_init(iTCO_vendor_init_module);
  module_exit(iTCO_vendor_exit_module);

  MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, "
  		"R. Seretny <lkpatches@paypc.com>");

  MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
  MODULE_VERSION(DRV_VERSION);
  MODULE_LICENSE("GPL");