#ifndef _LINUX_I2C_ALGO_PCA_H
  #define _LINUX_I2C_ALGO_PCA_H

  /* Chips known to the pca algo */
  #define I2C_PCA_CHIP_9564	0x00
  #define I2C_PCA_CHIP_9665	0x01
  
  /* Internal period for PCA9665 oscilator */
  #define I2C_PCA_OSC_PER		3 /* e10-8s */
  
  /* Clock speeds for the bus for PCA9564*/

  #define I2C_PCA_CON_330kHz	0x00
  #define I2C_PCA_CON_288kHz	0x01
  #define I2C_PCA_CON_217kHz	0x02
  #define I2C_PCA_CON_146kHz	0x03
  #define I2C_PCA_CON_88kHz	0x04
  #define I2C_PCA_CON_59kHz	0x05
  #define I2C_PCA_CON_44kHz	0x06
  #define I2C_PCA_CON_36kHz	0x07
  
  /* PCA9564 registers */
  #define I2C_PCA_STA		0x00 /* STATUS  Read Only  */
  #define I2C_PCA_TO		0x00 /* TIMEOUT Write Only */
  #define I2C_PCA_DAT		0x01 /* DATA    Read/Write */
  #define I2C_PCA_ADR		0x02 /* OWN ADR Read/Write */
  #define I2C_PCA_CON		0x03 /* CONTROL Read/Write */

  /* PCA9665 registers */
  #define I2C_PCA_INDPTR          0x00 /* INDIRECT Pointer Write Only */
  #define I2C_PCA_IND             0x02 /* INDIRECT Read/Write */
  
  /* PCA9665 indirect registers */
  #define I2C_PCA_ICOUNT          0x00 /* Byte Count for buffered mode */
  #define I2C_PCA_IADR            0x01 /* OWN ADR */
  #define I2C_PCA_ISCLL           0x02 /* SCL LOW period */
  #define I2C_PCA_ISCLH           0x03 /* SCL HIGH period */
  #define I2C_PCA_ITO             0x04 /* TIMEOUT */
  #define I2C_PCA_IPRESET         0x05 /* Parallel bus reset */
  #define I2C_PCA_IMODE           0x06 /* I2C Bus mode */
  
  /* PCA9665 I2C bus mode */
  #define I2C_PCA_MODE_STD        0x00 /* Standard mode */
  #define I2C_PCA_MODE_FAST       0x01 /* Fast mode */
  #define I2C_PCA_MODE_FASTP      0x02 /* Fast Plus mode */
  #define I2C_PCA_MODE_TURBO      0x03 /* Turbo mode */

  #define I2C_PCA_CON_AA		0x80 /* Assert Acknowledge */
  #define I2C_PCA_CON_ENSIO	0x40 /* Enable */
  #define I2C_PCA_CON_STA		0x20 /* Start */
  #define I2C_PCA_CON_STO		0x10 /* Stop */
  #define I2C_PCA_CON_SI		0x08 /* Serial Interrupt */
  #define I2C_PCA_CON_CR		0x07 /* Clock Rate (MASK) */

  struct i2c_algo_pca_data {

  	void 				*data;	/* private low level data */
  	void (*write_byte)		(void *data, int reg, int val);
  	int  (*read_byte)		(void *data, int reg);
  	int  (*wait_for_completion)	(void *data);
  	void (*reset_chip)		(void *data);

  	/* For PCA9564, use one of the predefined frequencies:
  	 * 330000, 288000, 217000, 146000, 88000, 59000, 44000, 36000
  	 * For PCA9665, use the frequency you want here. */

  	unsigned int			i2c_clock;

  	unsigned int			chip;

  };

  int i2c_pca_add_bus(struct i2c_adapter *);

  int i2c_pca_add_numbered_bus(struct i2c_adapter *);

  
  #endif /* _LINUX_I2C_ALGO_PCA_H */