02 Mar, 2010
1 commit
-
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
ARM: Eliminate decompressor -Dstatic= PIC hack
ARM: 5958/1: ARM: U300: fix inverted clk round rate
ARM: 5956/1: misplaced parentheses
ARM: 5955/1: ep93xx: move timer defines into core.c and document
ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
ARM: 5953/1: ep93xx: fix broken build of clock.c
ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
ARM: 5949/1: NUC900 add gpio virtual memory map
ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
ARM: make_coherent(): fix problems with highpte, part 2
MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
ARM: 5945/1: ep93xx: include correct irq.h in core.c
ARM: 5933/1: amba-pl011: support hardware flow control
ARM: 5930/1: Add PKMAP area description to memory.txt.
ARM: 5929/1: Add checks to detect overlap of memory regions.
ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
ARM: 5927/1: Make delimiters of DMA area globally visibly.
ARM: 5926/1: Add "Virtual kernel memory..." printout.
ARM: 5920/1: OMAP4: Enable L2 Cache
...Fix up trivial conflict in arch/arm/mach-mx25/clock.c
26 Feb, 2010
1 commit
-
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits)
of: remove undefined request_OF_resource & release_OF_resource
of/sparc: Remove sparc-local declaration of allnodes and devtree_lock
of: move definition of of_chosen into common code.
of: remove unused extern reference to devtree_lock
of: put default string compare and #a/s-cell values into common header
of/flattree: Don't assume HAVE_LMB
of: protect linux/of.h with CONFIG_OF
proc_devtree: fix THIS_MODULE without module.h
of: Remove old and misplaced function declarations
of/flattree: Make the kernel accept ePAPR style phandle information
of/flattree: endian-convert members of boot_param_header
of: assume big-endian properties, adding conversions where necessary
of: use __be32 for cell value accessors
of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing
of/flattree: use callback to setup initrd from /chosen
proc_devtree: include linux/of.h
of: make set_node_proc_entry private to proc_devtree.c
of: include linux/proc_fs.h
of/flattree: merge early_init_dt_scan_memory() common code
of: add 'of_' prefix to machine_is_compatible()
...
24 Feb, 2010
2 commits
-
Trailing semicolon causes compilation involving out_le32() to fail.
Signed-off-by: Steven J. Magnani
Signed-off-by: Michal Simek -
I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.Signed-off-by: Michal Simek
21 Feb, 2010
1 commit
-
On VIVT ARM, when we have multiple shared mappings of the same file
in the same MM, we need to ensure that we have coherency across all
copies. We do this via make_coherent() by making the pages
uncacheable.This used to work fine, until we allowed highmem with highpte - we
now have a page table which is mapped as required, and is not available
for modification via update_mmu_cache().Ralf Beache suggested getting rid of the PTE value passed to
update_mmu_cache():On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables
to construct a pointer to the pte again. Passing a pte_t * is much
more elegant. Maybe we might even replace the pte argument with the
pte_t?Ben Herrenschmidt would also like the pte pointer for PowerPC:
Passing the ptep in there is exactly what I want. I want that
-instead- of the PTE value, because I have issue on some ppc cases,
for I$/D$ coherency, where set_pte_at() may decide to mask out the
_PAGE_EXEC.So, pass in the mapped page table pointer into update_mmu_cache(), and
remove the PTE value, updating all implementations and call sites to
suit.Includes a fix from Stephen Rothwell:
sparc: fix fallout from update_mmu_cache API change
Signed-off-by: Stephen Rothwell
Acked-by: Benjamin Herrenschmidt
Signed-off-by: Russell King
15 Feb, 2010
1 commit
-
Neither request_OF_resource or release_OF_resource are defined
anywhere. Remove the declarations.Signed-off-by: Grant Likely
Acked-by: Benjamin Herrenschmidt
Acked-by: Michal Simek
14 Feb, 2010
4 commits
-
Rather than defining of_chosen in each arch, it can be defined for all
in driver/of/base.cSigned-off-by: Grant Likely
Acked-by: Benjamin Herrenschmidt
Acked-by: Michal Simek -
Neither the powerpc nor the microblaze code use devtree_lock anymore.
Remove the extern reference.Signed-off-by: Grant Likely
Acked-by: Benjamin Herrenschmidt
Acked-by: Michal Simek -
Most architectures don't need to change these. Put them into common
code to eliminate some duplicationSigned-off-by: Grant Likely
Acked-by: Benjamin Herrenschmidt
Acked-by: Michal Simek -
We don't always have lmb available, so make arches provide an
early_init_dt_alloc_memory_arch() to handle the allocation of
memory in the fdt code.When we don't have lmb.h included, we need asm/page.h for __va.
Signed-off-by: Jeremy Kerr
Signed-off-by: Grant Likely
Acked-by: Benjamin Herrenschmidt
Acked-by: Michal Simek
09 Feb, 2010
5 commits
-
At present, the fdt code sets the kernel-wide initrd_start and
initrd_end variables when parsing /chosen. On ARM, we only set these
once the bootmem has been reserved.This change adds an arch hook to setup the initrd from the device
tree:void early_init_dt_setup_initrd_arch(unsigned long start,
unsigned long end);The arch-specific code can then setup the initrd however it likes.
Compiled on powerpc, with CONFIG_BLK_DEV_INITRD=y and =n.
Signed-off-by: Jeremy Kerr
Signed-off-by: Grant Likely -
Merge common code between PowerPC and Microblaze architectures.
Signed-off-by: Grant Likely
Acked-by: Michal Simek -
Merge common function between powerpc, sparc and microblaze. Code is
identical for powerpc and microblaze, but adds a lock (and release) of
the devtree_lock on sparc.Signed-off-by: Jeremy Kerr
Signed-off-by: Grant Likely -
Merge common code between PowerPC and Microblaze
Signed-off-by: Grant Likely
Tested-by: Wolfram Sang
Acked-by: Benjamin Herrenschmidt -
Microblaze only has one CPU, it isn't SMP at all. early_init_dt_scan_cpus()
is effectively just a no-op, so remove it.Microblaze doesn't support hypervisor assisted dump either, so the phyp stuff
can also go.Signed-off-by: Grant Likely
Acked-by: Michal Simek
08 Feb, 2010
1 commit
-
We found that on write-trough kernel is necessary to do that invalidation.
One WB is possible to use invalidation too.Signed-off-by: Michal Simek
03 Feb, 2010
2 commits
-
Interrupts must be disabled while an interrupt state restore
(prep for interrupt return) is in progress.
Code to do this was lost in the port to the mainline kernel.Signed-off-by: Steven J. Magnani
Signed-off-by: Michal Simek -
There were several changes in Microblaze defconfig that's why
is good to update defconfigs.Signed-off-by: Michal Simek
29 Jan, 2010
4 commits
-
In struct device_node, the phandle is named 'linux_phandle' for PowerPC
and MicroBlaze, and 'node' for SPARC. There is no good reason for the
difference, it is just an artifact of the code diverging over a couple
of years. This patch renames both to simply .phandle.Note: the .node also existed in PowerPC/MicroBlaze, but the only user
seems to be arch/powerpc/platforms/powermac/pfunc_core.c. It doesn't
look like the assignment between .linux_phandle and .node is
significantly different enough to warrant the separate code paths
unless ibm,phandle properties actually appear in Apple device trees.I think it is safe to eliminate the old .node property and use
phandle everywhere.Signed-off-by: Grant Likely
Acked-by: David S. Miller
Tested-by: Wolfram Sang
Acked-by: Benjamin Herrenschmidt -
Merge common code between PowerPC and MicroBlaze
Signed-off-by: Grant Likely
Tested-by: Wolfram Sang
Acked-by: Benjamin Herrenschmidt -
Merge common code between PowerPC and Microblaze
Signed-off-by: Grant Likely
Tested-by: Wolfram Sang
Acked-by: Benjamin Herrenschmidt
18 Jan, 2010
5 commits
-
we are follow powerpc change:
44ef339073f67d4abcc62ae52a5fbc069d7a4d29Signed-off-by: Michal Simek
-
Signed-off-by: Michal Simek
-
PT_ macros are used by gdb and strace uses them too.
Signed-off-by: Michal Simek
-
We had wrong name in unistd.h + I wire up this syscall
in syscall table.Signed-off-by: Michal Simek
-
Patch a2e2725541fad72416326798c2d7fa4dafb7d337 should
contain change in unistd.h too. The same problem
had MIPS.Signed-off-by: Michal Simek
17 Dec, 2009
1 commit
-
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
net: fix for utsrelease.h moving to generated
gen_init_cpio: fixed fwrite warning
kbuild: fix make clean after mismerge
kbuild: generate modules.builtin
genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}()
score: add asm/asm-offsets.h wrapper
unifdef: update to upstream revision 1.190
kbuild: specify absolute paths for cscope
kbuild: create include/generated in silentoldconfig
scripts/package: deb-pkg: use fakeroot if available
scripts/package: add KBUILD_PKG_ROOTCMD variable
scripts/package: tar-pkg: use tar --owner=root
Kbuild: clean up marker
net: add net_tstamp.h to headers_install
kbuild: move utsrelease.h to include/generated
kbuild: move autoconf.h to include/generated
drop explicit include of autoconf.h
kbuild: move compile.h to include/generated
kbuild: drop include/asm
kbuild: do not check for include/asm-$ARCH
...Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
16 Dec, 2009
1 commit
-
Currently all architectures but microblaze unconditionally define
USE_ELF_CORE_DUMP. The microblaze omission seems like an error to me, so
let's kill this ifdef and make sure we are the same everywhere.Signed-off-by: Christoph Hellwig
Acked-by: Hugh Dickins
Cc:
Cc: Michal Simek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
15 Dec, 2009
1 commit
-
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.Signed-off-by: Thomas Gleixner
Acked-by: Peter Zijlstra
Acked-by: Ingo Molnar
14 Dec, 2009
10 commits
-
Generic rt_sigsuspend syscalls doesn't need any asm wrapper.
Signed-off-by: Michal Simek
-
The noMMU syscall trap has a bug that causes R11 to be zero on return to
userland. Remove the extra "save" of R11 responsible for the bug.Remove reloading of mode indicator because r11 already contains it.
Signed-off-by: Steven J. Magnani
Signed-off-by: Michal Simek -
show_tmem function do nothing that's why I removed it.
There is also cleaning of commented ancient code.Signed-off-by: Michal Simek
-
Microblaze version 7.20.d is the first MB version which can be run
on MMU linux. Please do not used previous version because they contain
HW bug.
Based on WB support was necessary to redesign whole cache design.
Microblaze versions from 7.20.a don't need to disable IRQ and cache
before working with them that's why there are special structures for it.Signed-off-by: Michal Simek
-
Microblaze v7.30.a will have 0x10 version string.
Signed-off-by: Michal Simek
-
We need to continue with next microblaze PVR version that's why
I have to remove that ancient version. These version strings not match
any versions. From Microblaze v5.00.a is possible to use this style.
I believe that none use ancients versions. If yes they will be just
labeled as unknown version.Signed-off-by: Michal Simek
-
panic_timeout is in BSS section and it is cleared with BSS section.
This means that value is setup to 0.Signed-off-by: Michal Simek
-
There is not necessary to count system calls that's why
I added DEBUG macroSigned-off-by: Michal Simek
-
For simpleImage format we need to compile DTC. There is still possibility
to compile only Linux kernel without DTB compiled-in.Signed-off-by: Michal Simek
-
Microblaze uses timer interrupt mode. Microblaze don't have
any performance counter that's why we use just simple implementation.Signed-off-by: John Williams
Signed-off-by: Michal Simek
