Eric Lee / smarc-fsl-linux-kernel

02 Apr, 2012

1 commit

30 Mar, 2012

1 commit

29 Mar, 2012

1 commit

21 Mar, 2012

2 commits

19 Mar, 2012

1 commit

17 Mar, 2012

3 commits

  • 0c350a9a5   powerpc/85xx: allow CONFIG_PHYS_64BIT to be selectable ... Browse Code »

    Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS,
    so that large physical address support is a selectable option for non-CoreNet
    reference boards.

    The option is enabled in mpc85xx_[smp_]defconfig so that the default is
    unchanged. However, now it can be deselected.

    The P1022DS had this option defined because the default device tree for
    this board uses 36-bit addresses. This had the side-effect of forcing
    this option on for all boards that use mpc85xx_[smp_]defconfig. Some
    users may want to disable this feature to create an optimized configuration
    for boards with
    Signed-off-by: Kumar Gala

    Timur Tabi
     
  • e041013ac   powerpc/85xx: Board support for GE IMP3A ... Browse Code »

    Initial board support for the GE IMP3A, a 3U compactPCI card with a p2020
    processor.

    Signed-off-by: Martyn Welch
    Signed-off-by: Kumar Gala

    Martyn Welch
     
  • 6518bb69f   gpio: Move GE GPIO driver to reside within GPIO subsystem ... Browse Code »

    The GE GPIO driver provides basic support (set direction, read/write state)
    for the GPIO provided on some GE single board computers. This patch moves
    the driver from the 86xx specific platform directrory to the GPIO subsystem
    so that it can be used on non-86xx boards.

    Signed-off-by: Martyn Welch
    Signed-off-by: Kumar Gala

    Martyn Welch
     

27 Feb, 2012

1 commit

16 Feb, 2012

1 commit

07 Jan, 2012

1 commit

  • e4e88f31b   Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc ... Browse Code »

    * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
    powerpc: fix compile error with 85xx/p1010rdb.c
    powerpc: fix compile error with 85xx/p1023_rds.c
    powerpc/fsl: add MSI support for the Freescale hypervisor
    arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
    powerpc/fsl: Add support for Integrated Flash Controller
    powerpc/fsl: update compatiable on fsl 16550 uart nodes
    powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
    powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
    powerpc/fsl: Update defconfigs to enable some standard FSL HW features
    powerpc: Add TBI PHY node to first MDIO bus
    sbc834x: put full compat string in board match check
    powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
    powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
    offb: Fix setting of the pseudo-palette for >8bpp
    offb: Add palette hack for qemu "standard vga" framebuffer
    offb: Fix bug in calculating requested vram size
    powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
    powerpc/44x: Fix build error on currituck platform
    powerpc/boot: Change the load address for the wrapper to fit the kernel
    powerpc/44x: Enable CRASH_DUMP for 440x
    ...

    Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
    the additional sparse-checking code for cputime_t.

    Linus Torvalds
     

05 Jan, 2012

2 commits

20 Dec, 2011

1 commit

  • 0f890c8d2   powerpc: Rename mapping based RELOCATABLE to DYNAMIC_MEMSTART for BookE ... Browse Code »

    The current implementation of CONFIG_RELOCATABLE in BookE is based
    on mapping the page aligned kernel load address to KERNELBASE. This
    approach however is not enough for platforms, where the TLB page size
    is large (e.g, 256M on 44x). So we are renaming the RELOCATABLE used
    currently in BookE to DYNAMIC_MEMSTART to reflect the actual method.

    The CONFIG_RELOCATABLE for PPC32(BookE) based on processing of the
    dynamic relocations will be introduced in the later in the patch series.

    This change would allow the use of the old method of RELOCATABLE for
    platforms which can afford to enforce the page alignment (platforms with
    smaller TLB size).

    Changes since v3:

    * Introduced a new config, NONSTATIC_KERNEL, to denote a kernel which is
    either a RELOCATABLE or DYNAMIC_MEMSTART(Suggested by: Josh Boyer)

    Suggested-by: Scott Wood
    Tested-by: Scott Wood

    Signed-off-by: Suzuki K. Poulose
    Cc: Scott Wood
    Cc: Kumar Gala
    Cc: Josh Boyer
    Cc: Benjamin Herrenschmidt
    Cc: linux ppc dev
    Signed-off-by: Josh Boyer

    Suzuki Poulose
     

16 Dec, 2011

2 commits

09 Dec, 2011

1 commit

08 Dec, 2011

3 commits

  • 7c637b04f   powerpc: Enable squashfs as a module ... Browse Code »

    Most distros use it so we may as well enable it and get regular compile
    testing.

    Signed-off-by: Anton Blanchard
    Signed-off-by: Benjamin Herrenschmidt

    Anton Blanchard
     
  • 11eab297f   powerpc: Add support for OpenBlockS 600 ... Browse Code »

    So I've had one of these for a while and it looks like the vendor never
    bothered submitting the support upstream.

    This adds it using ppc40x_simple and provides a device-tree.

    There are some changes to the boot wrapper because the way u-boot works
    on this thing, it seems to expect a multipart image with the kernel,
    initrd and dtb in it.

    The USB support is missing as it needs the yet unmerged driver for
    the DWC OTG part and the GPIOs may need further definition in the dts.

    Signed-off-by: Benjamin Herrenschmidt

    Benjamin Herrenschmidt
     
  • 987706acf   powerpc/ps3: Update ps3_defconfig ... Browse Code »

    Refresh ps3_defconfig to latest kernel sources and
    change the options:

    CONFIG_PPP=m to CONFIG_PPP=n.
    CONFIG_NAMESPACES=y to CONFIG_NAMESPACES=n
    CONFIG_NUMA=y to CONFIG_NUMA=n

    Signed-off-by: Geoff Levand
    Signed-off-by: Benjamin Herrenschmidt

    Geoff Levand
     

07 Dec, 2011

2 commits

30 Nov, 2011

1 commit

  • d5b9ee7b5   powerpc/40x: Add APM8018X SOC support ... Browse Code »

    The AppliedMicro APM8018X embedded processor targets embedded applications that
    require low power and a small footprint. It features a PowerPC 405 processor
    core built in a 65nm low-power CMOS process with a five-stage pipeline executing
    up to one instruction per cycle. The family has 128-kbytes of on-chip memory,
    a 128-bit local bus and on-chip DDR2 SDRAM controller with 16-bit interface.

    Signed-off-by: Tanmay Inamdar
    Signed-off-by: Josh Boyer

    Tanmay Inamdar
     

25 Nov, 2011

2 commits

  • cc35b6766   powerpc/book3e: Add Chroma as a new WSP/PowerEN platform. ... Browse Code »

    This patch add the Chroma platform to WSP/PowerEN, which is a PCIe
    card (a defconfig is included).

    The card includes an H8 service processor that is used to manage the
    card. The H8 is connected over the second serial UART on the PowerEN
    chip so this patch includes a simple 16550 driver to enable
    communication, mostly for "power off" and "rebooting".

    This patch also includes a, WSP specific, "halt" method that will shut
    of all A2 cores but still leave power on at the chip level. This is
    desirable, especially if you wish to interrogate the chip with a
    hardware probe after the halt.

    Signed-off-by: Jimi Xenidis
    Signed-off-by: Benjamin Herrenschmidt

    Jimi Xenidis
     
  • 49e44064d   powerpc/44x: Add mtd ndfc to the ppx44x defconfig ... Browse Code »

    Signed-off-by: Tony Breeds
    Acked-by: Josh Boyer
    Signed-off-by: Benjamin Herrenschmidt

    Tony Breeds
     

08 Nov, 2011

2 commits

07 Nov, 2011

1 commit

  • 1197ab294   Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc ... Browse Code »

    * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
    powerpc/p3060qds: Add support for P3060QDS board
    powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
    powerpc/85xx: Make kexec to interate over online cpus
    powerpc/fsl_booke: Fix comment in head_fsl_booke.S
    powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
    powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
    powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
    powerpc/86xx: Correct Gianfar support for GE boards
    powerpc/cpm: Clear muram before it is in use.
    drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
    powerpc/fsl_msi: add support for "msi-address-64" property
    powerpc/85xx: Setup secondary cores PIR with hard SMP id
    powerpc/fsl-booke: Fix settlbcam for 64-bit
    powerpc/85xx: Adding DCSR node to dtsi device trees
    powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
    powerpc/85xx: fix PHYS_64BIT selection for P1022DS
    powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
    powerpc: respect mem= setting for early memory limit setup
    powerpc: Update corenet64_smp_defconfig
    powerpc: Update mpc85xx/corenet 32-bit defconfigs
    ...

    Fix up trivial conflicts in:
    - arch/powerpc/configs/40x/hcu4_defconfig
    removed stale file, edited elsewhere
    - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
    added opal and gelic drivers vs added ePAPR driver
    - drivers/tty/serial/8250.c
    moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

    Linus Torvalds
     

04 Nov, 2011

1 commit

  • 96cc017c5   powerpc/p3060qds: Add support for P3060QDS board ... Browse Code »
    46

    The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
    The P3060 Processor combines six e500mc Power Architecture processor cores with
    high-performance datapath acceleration architecture(DPAA), CoreNet fabric
    infrastructure, as well as network and peripheral interfaces.

    P3060QDS Board Overview:
    Memory subsystem:
    - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
    - 128M Bytes NOR flash single-chip memory
    - 16M Bytes SPI flash
    - 8K Bytes AT24C64 I2C EEPROM
    Ethernet:
    - 4x1G + 4x1G/2.5G Ethernet controllers
    - 2xRGMII + 1xMII, three VSC8641 PHYs on board
    - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3
    PCIe: Two PCI Express 2.0 controllers/ports
    USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board
    I2C: Four I2C controllers
    UART: Supports up to four UARTs
    RapidIO: Supports two serial RapidIO ports

    Signed-off-by: Shengzhou Liu
    Signed-off-by: Kumar Gala

    Shengzhou Liu
     

12 Oct, 2011

3 commits

07 Oct, 2011

1 commit

  • d31337657   powerpc/85xx: Rename p2040_rdb.c to p2041_rdb.c ... Browse Code »

    There's only p2041rdb board for official release, but the p2041 silicon
    on the board can be converted to p2040 silicon without XAUI and L2 cache
    function, then the board becomes p2040rdb board. so we use the file name
    p2041_rdb.c to handle P2040RDB board and P2041RDB board which is also
    consistent with the board name under U-Boot.

    During the rename we make few other minor changes to the device tree:
    * Move USB phy setting into p2041si.dtsi as its SoC not board defined
    * Convert PCI clock-frequency to decimal to be more readable

    Signed-off-by: Mingkai Hu
    Signed-off-by: Kumar Gala

    Mingkai Hu
     

29 Sep, 2011

1 commit

23 Sep, 2011

3 commits

  • 7b72c9f87   powerpc: update 512x-defconfig ... Browse Code »

    Activate all MPC512x related boards. Also enable GPIO-driver, SPI driver
    and at25 to test SPI. Enable DEVTMPFS. Bump to 3.1-rc6.

    Signed-off-by: Wolfram Sang
    Cc: Anatolij Gustschin
    Cc: Benjamin Herrenschmidt
    Signed-off-by: Anatolij Gustschin

    Wolfram Sang
     
  • c68308dd5   gpio: move mpc8xxx/512x gpio driver to drivers/gpio ... Browse Code »

    Move the driver to the place where it is expected to be nowadays. Also
    rename its CONFIG-name to match the rest and adapt the defconfigs.
    Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to
    the platforms, because this option is per-platform and not per-driver.

    Signed-off-by: Wolfram Sang
    Cc: Anatolij Gustschin
    Cc: Grant Likely
    Cc: Benjamin Herrenschmidt
    Acked-by: Grant Likely
    Signed-off-by: Anatolij Gustschin

    Wolfram Sang
     
  • 40dc7e8b4   powerpc/5200: enable audio in the defconfig ... Browse Code »

    Audio support for the MPC5200 exists, so enable it by default.

    Signed-off-by: Timur Tabi
    Acked-by: Wolfram Sang
    Signed-off-by: Anatolij Gustschin

    Timur Tabi
     

22 Sep, 2011

1 commit

  • 8decf8687   Merge branch 'master' of github.com:davem330/net ... Browse Code »

    Conflicts:
    MAINTAINERS
    drivers/net/Kconfig
    drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
    drivers/net/ethernet/broadcom/tg3.c
    drivers/net/wireless/iwlwifi/iwl-pci.c
    drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
    drivers/net/wireless/rt2x00/rt2800usb.c
    drivers/net/wireless/wl12xx/main.c

    David S. Miller
     

20 Sep, 2011

1 commit