01 Apr, 2012
1 commit
-
Signed-off-by: Al Viro
29 Mar, 2012
1 commit
-
Pull ext3, UDF, and quota fixes from Jan Kara:
"A couple of ext3 & UDF fixes and also one improvement in quota
locking."* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext3: fix start and len arguments handling in ext3_trim_fs()
udf: Fix deadlock in udf_release_file()
udf: Fix file entry logicalBlocksRecorded
udf: Fix handling of i_blocks
quota: Make quota code not call tty layer with dqptr_sem held
udf: Init/maintain file entry checkpoint field
ext3: Update ctime in ext3_splice_branch() only when needed
ext3: Don't call dquot_free_block() if we don't update anything
udf: Remove unnecessary OOM messages
21 Mar, 2012
1 commit
-
Signed-off-by: Al Viro
03 Mar, 2012
1 commit
-
The overflow might happen when passing blocknr into
ext3_get_group_no_and_offset(), because it expects type ext3_fsblk_t
which might be smaller than uint64_t. This will most likely happen when
calling FITRIM with the default argument len = ULLONG_MAX.Fix this by using "end" variable instead of "start+len" as it is easier
to get right and specifically check that the end is not beyond the end
of the file system, so we are sure that the result of
get_group_no_and_offset() will not overflow. Otherwise truncate it to
the size of the file system.Signed-off-by: Lukas Czerner
Cc: Jan Kara
Signed-off-by: Jan Kara
01 Mar, 2012
2 commits
-
Currently ext3 updates ctime in ext3_splice_branch() which is called whenever
we allocate one block. But it is wasteful because ext3 doesn't support
nanosecond timestamp. This leads to a performance loss.Signed-off-by: Kazuya Mio
Signed-off-by: Jan Kara -
dquot_free_block() is called in the end of ext3_new_blocks() and updates
information of the inode structure. However, this update is not necessary
if the number of blocks we requested is equal to the number of
allocated blocks.Signed-off-by: Kazuya Mio
Signed-off-by: Jan Kara
10 Jan, 2012
1 commit
-
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2/3/4: delete unneeded includes of module.h
ext{3,4}: Fix potential race when setversion ioctl updates inode
udf: Mark LVID buffer as uptodate before marking it dirty
ext3: Don't warn from writepage when readonly inode is spotted after error
jbd: Remove j_barrier mutex
reiserfs: Force inode evictions before umount to avoid crash
reiserfs: Fix quota mount option parsing
udf: Treat symlink component of type 2 as /
udf: Fix deadlock when converting file from in-ICB one to normal one
udf: Cleanup calling convention of inode_getblk()
ext2: Fix error handling on inode bitmap corruption
ext3: Fix error handling on inode bitmap corruption
ext3: replace ll_rw_block with other functions
ext3: NULL dereference in ext3_evict_inode()
jbd: clear revoked flag on buffers before a new transaction started
ext3: call ext3_mark_recovery_complete() when recovery is really needed
09 Jan, 2012
7 commits
-
Delete any instances of include module.h that were not strictly
required. In the case of ext2, the declaration of MODULE_LICENSE
etc. were in inode.c but the module_init/exit were in super.c, so
relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it
consistent with ext3 and ext4 at the same time.Signed-off-by: Paul Gortmaker
Signed-off-by: Jan Kara -
The EXT{3,4}_IOC_SETVERSION ioctl() updates i_ctime and i_generation
without i_mutex. This can lead to a race with the other operations that
update i_ctime. This is not a big issue but let's make the ioctl consistent
with how we handle e.g. other timestamp updates and use i_mutex to protect
inode changes.Signed-off-by: Djalal Harouni
Signed-off-by: Jan Kara -
WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is
remounted read-only. This unnecessarily scares users (well, they should be
scared because of filesystem error, but the stack trace distracts them from the
right source of their fear ;-). We could as well just remove the WARN_ON but
it's not hard to fix it to not trip on filesystem with errors and not use more
cycles in the common case so that's what we do.CC: stable@kernel.org
Signed-off-by: Jan Kara -
When insert_inode_locked() fails in ext3_new_inode() it most likely
means inode bitmap got corrupted and we allocated again inode which
is already in use. Also doing unlock_new_inode() during error recovery
is wrong since inode does not have I_NEW set. Fix the problem by jumping
to fail: (instead of fail_drop:) which declares filesystem error and
does not call unlock_new_inode().Reviewed-by: Eric Sandeen
Signed-off-by: Jan Kara -
ll_rw_block() is deprecated. Thus we replace it with other functions.
CC: Jan Kara
Signed-off-by: Zheng Liu
Signed-off-by: Jan Kara -
Both ext3 and ext4 put the half-created symlink inode into the orphan list
for a while (see the comment in ext[34]_symlink() for gory details). Then,
if everything went fine, they pull it out of the orphan list and bump the
link count back to 1. The thing is, inc_nlink() is going to complain about
seeing somebody changing i_nlink from 0 to 1. With a good reason, since
normally something like that is a bug. Explicit set_nlink(inode, 1) does
the same thing as inc_nlink() here, but it does *not* complain - exactly
because it should be usable in strange situations like this one.Signed-off-by: Al Viro
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
Kconfig: acpi: Fix typo in comment.
misc latin1 to utf8 conversions
devres: Fix a typo in devm_kfree comment
btrfs: free-space-cache.c: remove extra semicolon.
fat: Spelling s/obsolate/obsolete/g
SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
tools/power turbostat: update fields in manpage
mac80211: drop spelling fix
types.h: fix comment spelling for 'architectures'
typo fixes: aera -> area, exntension -> extension
devices.txt: Fix typo of 'VMware'.
sis900: Fix enum typo 'sis900_rx_bufer_status'
decompress_bunzip2: remove invalid vi modeline
treewide: Fix comment and string typo 'bufer'
hyper-v: Update MAINTAINERS
treewide: Fix typos in various parts of the kernel, and fix some comments.
clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
leds: Kconfig: Fix typo 'D2NET_V2'
sound: Kconfig: drop unknown symbol ARCH_CLPS7500
...Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
07 Jan, 2012
2 commits
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
04 Jan, 2012
7 commits
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
-
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the methodSigned-off-by: Al Viro
-
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...Signed-off-by: Al Viro
-
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...Signed-off-by: Al Viro
-
new helper (wrapper around mnt_drop_write()) to be used in pair with
mnt_want_write_file().Signed-off-by: Al Viro
-
it's both faster (in case when file has been opened for write) and cleaner.
Signed-off-by: Al Viro
02 Dec, 2011
1 commit
-
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments.
Please let me know if I missed anything, and I will try to get it changed and resent.Signed-off-by: Justin P. Mattock
Acked-by: Randy Dunlap
Signed-off-by: Jiri Kosina
22 Nov, 2011
1 commit
-
This is an fsfuzzer bug. ->s_journal is set at the end of
ext3_load_journal() but we try to use it in the error handling from
ext3_get_journal() while it's still NULL.[ 337.039041] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024
[ 337.040380] IP: [] _raw_spin_lock+0x9/0x30
[ 337.041687] PGD 0
[ 337.043118] Oops: 0002 [#1] SMP
[ 337.044483] CPU 3
[ 337.044495] Modules linked in: ecb md4 cifs fuse kvm_intel kvm brcmsmac brcmutil crc8 cordic r8169 [last unloaded: scsi_wait_scan]
[ 337.047633]
[ 337.049259] Pid: 8308, comm: mount Not tainted 3.2.0-rc2-next-20111121+ #24 SAMSUNG ELECTRONICS CO., LTD. RV411/RV511/E3511/S3511 /RV411/RV511/E3511/S3511
[ 337.051064] RIP: 0010:[] [] _raw_spin_lock+0x9/0x30
[ 337.052879] RSP: 0018:ffff8800b1d11ae8 EFLAGS: 00010282
[ 337.054668] RAX: 0000000000000100 RBX: 0000000000000000 RCX: ffff8800b77c2000
[ 337.056400] RDX: ffff8800a97b5c00 RSI: 0000000000000000 RDI: 0000000000000024
[ 337.058099] RBP: ffff8800b1d11ae8 R08: 6000000000000000 R09: e018000000000000
[ 337.059841] R10: ff67366cc2607c03 R11: 00000000110688e6 R12: 0000000000000000
[ 337.061607] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8800a78f06e8
[ 337.063385] FS: 00007f9d95652800(0000) GS:ffff8800b7180000(0000) knlGS:0000000000000000
[ 337.065110] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 337.066801] CR2: 0000000000000024 CR3: 00000000aef2c000 CR4: 00000000000006e0
[ 337.068581] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 337.070321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 337.072105] Process mount (pid: 8308, threadinfo ffff8800b1d10000, task ffff8800b1d02be0)
[ 337.073800] Stack:
[ 337.075487] ffff8800b1d11b08 ffffffff811f48cf ffff88007ac9b158 0000000000000000
[ 337.077255] ffff8800b1d11b38 ffffffff8119405d ffff88007ac9b158 ffff88007ac9b250
[ 337.078851] ffffffff8181bda0 ffffffff8181bda0 ffff8800b1d11b68 ffffffff81131e31
[ 337.080284] Call Trace:
[ 337.081706] [] log_start_commit+0x1f/0x40
[ 337.083107] [] ext3_evict_inode+0x1fd/0x2a0
[ 337.084490] [] evict+0xa1/0x1a0
[ 337.085857] [] iput+0x101/0x210
[ 337.087220] [] iget_failed+0x21/0x30
[ 337.088581] [] ext3_iget+0x15c/0x450
[ 337.089936] [] ? ext3_rsv_window_add+0x81/0x100
[ 337.091284] [] ext3_get_journal+0x15/0xde
[ 337.092641] [] ext3_fill_super+0xf2b/0x1c30
[ 337.093991] [] ? register_shrinker+0x4d/0x60
[ 337.095332] [] mount_bdev+0x1a2/0x1e0
[ 337.096680] [] ? ext3_setup_super+0x210/0x210
[ 337.098026] [] ext3_mount+0x10/0x20
[ 337.099362] [] mount_fs+0x3e/0x1b0
[ 337.100759] [] ? __alloc_percpu+0xb/0x10
[ 337.102330] [] vfs_kern_mount+0x65/0xc0
[ 337.103889] [] do_kern_mount+0x4f/0x100
[ 337.105442] [] do_mount+0x19c/0x890
[ 337.106989] [] ? memdup_user+0x46/0x90
[ 337.108572] [] ? strndup_user+0x53/0x70
[ 337.110114] [] sys_mount+0x8b/0xe0
[ 337.111617] [] system_call_fastpath+0x16/0x1b
[ 337.113133] Code: 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b 5d c3 0f 1f 84 00 00 00 00 00 55 b8 00 01 00 00 48 89 e5 66 0f c1 07 0f b6 d4 38 c2 74 0c 0f 1f 00 f3 90 0f b6 07 38
[ 337.116588] RIP [] _raw_spin_lock+0x9/0x30
[ 337.118260] RSP
[ 337.119998] CR2: 0000000000000024
[ 337.188701] ---[ end trace c36d790becac1615 ]---Signed-off-by: Dan Carpenter
Signed-off-by: Jan Kara
09 Nov, 2011
1 commit
-
Call ext3_mark_recovery_complete() in ext3_fill_super() only if
needs_recovery is non-zero.Besides that, print out "recovery complete" message after calling
ext3_mark_recovery_complete().Cc: Jan Kara
Signed-off-by: Eryu Guan
Signed-off-by: Jan Kara
03 Nov, 2011
2 commits
-
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue:
vfs: add d_prune dentry operation
vfs: protect i_nlink
filesystems: add set_nlink()
filesystems: add missing nlink wrappers
logfs: remove unnecessary nlink setting
ocfs2: remove unnecessary nlink setting
jfs: remove unnecessary nlink setting
hypfs: remove unnecessary nlink setting
vfs: ignore error on forced remount
readlinkat: ensure we return ENOENT for the empty pathname for normal lookups
vfs: fix dentry leak in simple_fill_super() -
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Cleanup metadata flags handling
udf: Skip mirror metadata FE loading when metadata FE is ok
ext3: Allow quota file use root reservation
udf: Remove web reference from UDF MAINTAINERS entry
quota: Drop path reference on error exit from quotactl
udf: Neaten udf_debug uses
udf: Neaten logging output, use vsprintf extension %pV
udf: Convert printks to pr_
udf: Rename udf_warning to udf_warn
udf: Rename udf_error to udf_err
udf: Promote some debugging messages to udf_error
ext3: Remove the obsolete broken EXT3_IOC32_WAIT_FOR_READONLY.
udf: Add readpages support for udf.
ext3/balloc.c: local functions should be static
ext2: fix the outdated comment in ext2_nfs_get_inode()
ext3: remove deprecated oldalloc
fs/ext3/balloc.c: delete useless initialization
fs/ext2/balloc.c: delete useless initialization
ext3: fix message in ext3_remount for rw-remount case
ext3: Remove i_mutex from ext3_sync_file()Fix up trivial (printf format cleanup) conflicts in fs/udf/udfdecl.h
02 Nov, 2011
2 commits
-
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.Signed-off-by: Miklos Szeredi
Tested-by: Toshiyuki Okajima
Signed-off-by: Christoph Hellwig -
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).Signed-off-by: Miklos Szeredi
01 Nov, 2011
1 commit
-
Quota file is fs's metadata, so it is reasonable to permit use
root resevation if necessary. This patch fix 265'th xfstest failureSigned-off-by: Dmitry Monakhov
Signed-off-by: Jan Kara
25 Oct, 2011
1 commit
-
* 'next' of git://selinuxproject.org/~jmorris/linux-security: (95 commits)
TOMOYO: Fix incomplete read after seek.
Smack: allow to access /smack/access as normal user
TOMOYO: Fix unused kernel config option.
Smack: fix: invalid length set for the result of /smack/access
Smack: compilation fix
Smack: fix for /smack/access output, use string instead of byte
Smack: domain transition protections (v3)
Smack: Provide information for UDS getsockopt(SO_PEERCRED)
Smack: Clean up comments
Smack: Repair processing of fcntl
Smack: Rule list lookup performance
Smack: check permissions from user space (v2)
TOMOYO: Fix quota and garbage collector.
TOMOYO: Remove redundant tasklist_lock.
TOMOYO: Fix domain transition failure warning.
TOMOYO: Remove tomoyo_policy_memory_lock spinlock.
TOMOYO: Simplify garbage collector.
TOMOYO: Fix make namespacecheck warnings.
target: check hex2bin result
encrypted-keys: check hex2bin result
...
11 Oct, 2011
1 commit
-
There are no user of EXT3_IOC32_WAIT_FOR_READONLY and also it is
broken. No one set the set_ro_timer, no one wake up us and our
state is set to TASK_INTERRUPTIBLE not RUNNING. So remove it.Cc: Jan Kara
Signed-off-by: Tao Ma
Signed-off-by: Jan Kara
05 Oct, 2011
1 commit
-
This quites the sparse noise:
warning: symbol 'ext3_trim_all_free' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten
Cc: Jan Kara
Cc: Andrew Morton
Cc: Andreas Dilger
Signed-off-by: Jan Kara
23 Aug, 2011
2 commits
-
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule,
and lave REQ_META purely for marking requests as metadata in blktrace.All existing callers of REQ_META except for XFS are updated to also
set REQ_PRIO for now.Signed-off-by: Christoph Hellwig
Reviewed-by: Namhyung Kim
Signed-off-by: Jens Axboe -
Replace all occurnanced of the undocumented READ_META with READ | REQ_META
and remove the unused WRITE_META define.Signed-off-by: Christoph Hellwig
Signed-off-by: Jens Axboe
17 Aug, 2011
4 commits
-
For a long time now orlov is the default block allocator in the ext3. It
performs better than the old one and no one seems to claim otherwise so
we can safely drop it and make oldalloc and orlov mount option
deprecated.Signed-off-by: Lukas Czerner
Signed-off-by: Jan Kara -
Delete nontrivial initialization that is immediately overwritten by the
result of an allocation function.The semantic match that makes this change is as follows:
(http://coccinelle.lip6.fr/)//
@@
type T;
identifier i;
expression e;
@@(
T i = \(0\|NULL\|ERR_PTR(...)\);
|
-T i = e;
+T i;
)
... when != i
i = \(kzalloc\|kcalloc\|kmalloc\)(...);//
Signed-off-by: Julia Lawall
Signed-off-by: Jan Kara -
If there are some inodes in orphan list while a filesystem is being
read-only mounted, we should recommend that peole umount and then
mount it when they try to remount with read-write. But the current
message and comment recommend that they umount and then remount it
which may be slightly misleading.Signed-off-by: Toshiyuki Okajima
Signed-off-by: Jan Kara -
ext3_sync_file() does not need i_mutex for anything so just drop it.
Signed-off-by: Jan Kara
