24 Nov, 2011

1 commit


07 Nov, 2011

1 commit

  • * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
    Revert "tracing: Include module.h in define_trace.h"
    irq: don't put module.h into irq.h for tracking irqgen modules.
    bluetooth: macroize two small inlines to avoid module.h
    ip_vs.h: fix implicit use of module_get/module_put from module.h
    nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
    include: replace linux/module.h with "struct module" wherever possible
    include: convert various register fcns to macros to avoid include chaining
    crypto.h: remove unused crypto_tfm_alg_modname() inline
    uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
    pm_runtime.h: explicitly requires notifier.h
    linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
    miscdevice.h: fix up implicit use of lists and types
    stop_machine.h: fix implicit use of smp.h for smp_processor_id
    of: fix implicit use of errno.h in include/linux/of.h
    of_platform.h: delete needless include
    acpi: remove module.h include from platform/aclinux.h
    miscdevice.h: delete unnecessary inclusion of module.h
    device_cgroup.h: delete needless include
    net: sch_generic remove redundant use of
    net: inet_timewait_sock doesnt need
    ...

    Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
    - drivers/media/dvb/frontends/dibx000_common.c
    - drivers/media/video/{mt9m111.c,ov6650.c}
    - drivers/mfd/ab3550-core.c
    - include/linux/dmaengine.h

    Linus Torvalds
     

04 Nov, 2011

1 commit

  • * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
    MIPS: O32: Provide definition of registers ta0 .. ta3.
    MIPS: perf: Add Octeon support for hardware perf.
    MIPS: perf: Add support for 64-bit perf counters.
    MIPS: perf: Reorganize contents of perf support files.
    MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
    MIPS: Add accessor macros for 64-bit performance counter registers.
    MIPS: Add probes for more Octeon II CPUs.
    MIPS: Add more CPU identifiers for Octeon II CPUs.
    MIPS: XLR, XLS: Add comment for smp setup
    MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
    MIPS: JZ4740: GPIO: Simplify IRQ demuxer
    MIPS: JZ4740: Use generic irq chip
    MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
    MIPS: Alchemy: kill au1xxx.h header
    MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
    MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
    MIPS: Alchemy: Redo PCI as platform driver
    MIPS: Alchemy: more base address cleanup
    MIPS: Alchemy: rewrite USB platform setup.
    MIPS: Alchemy: abstract USB block control register access
    ...

    Fix up trivial conflicts in:
    arch/mips/alchemy/devboards/db1x00/platform.c
    drivers/ide/Kconfig
    drivers/mmc/host/au1xmmc.c
    drivers/video/Kconfig
    sound/mips/Kconfig

    Linus Torvalds
     

01 Nov, 2011

1 commit


25 Oct, 2011

1 commit

  • Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols,
    it's time to get rid of them: Move some of the platform devices to the
    boards which can use them, Rename a few (unused) constants in the header,
    Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally
    delete them altogether from the Alchemy Kconfig file.

    Signed-off-by: Manuel Lauss
    To: Linux-MIPS
    Patchwork: https://patchwork.linux-mips.org/patch/2707/
    Signed-off-by: Ralf Baechle

    Manuel Lauss
     

22 Sep, 2011

1 commit

  • Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
    We run all interrupt handlers with interrupts disabled
    and we even check and yell when an interrupt handler
    returns with interrupts enabled (see commit [b738a50a:
    genirq: Warn when handler enables interrupts]).

    So now this flag is a NOOP and can be removed.

    Signed-off-by: Yong Zhang
    Acked-by: Peter Ujfalusi
    Acked-by: Mark Brown
    Signed-off-by: Takashi Iwai

    Yong Zhang
     

28 Jul, 2011

1 commit


27 May, 2010

1 commit

  • Add a spin_unlock missing on the error path.

    The semantic match that finds this problem is as follows:
    (http://coccinelle.lip6.fr/)

    //
    @@
    expression E1;
    @@

    * spin_lock(E1,...);

    * spin_unlock(E1,...);
    //

    Signed-off-by: Julia Lawall
    Signed-off-by: Takashi Iwai

    Julia Lawall
     

30 Mar, 2010

1 commit

  • …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

18 Jan, 2010

1 commit


18 Dec, 2009

2 commits


02 Oct, 2009

1 commit


07 Jun, 2009

1 commit


24 Mar, 2009

1 commit


05 Feb, 2009

1 commit


12 Jan, 2009

1 commit


24 Aug, 2008

1 commit


13 Aug, 2008

1 commit


14 Jul, 2008

2 commits

  • This patch adds a new ALSA driver for the audio device found inside
    most of the SGI O2 workstation. The hardware uses a SGI custom chip,
    which feeds a AD codec chip.

    Signed-off-by: Thomas Bogendoerfer
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Thomas Bogendoerfer
     
  • This patch adds a new ALSA driver for the audio device found inside
    many older SGI workstation (Indy, Indigo2). The hardware uses a SGI
    custom chip, which feeds two codec chips, an IEC chip and a synth chip.
    Currently only one of the codecs is supported. This driver already has
    the same functionality as the HAL2 OSS driver and will replace it.

    Signed-off-by: Thomas Bogendoerfer
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Thomas Bogendoerfer
     

27 May, 2008

1 commit


01 Feb, 2008

1 commit

  • This header file exists only for some hacks to adapt alsa-driver
    tree. It's useless for building in the kernel. Let's move a few
    lines in it to sound/core.h and remove it.
    With this patch, sound/driver.h isn't removed but has just a single
    compile warning to include it. This should be really killed in
    future.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     

20 Oct, 2007

1 commit


05 Oct, 2006

1 commit

  • Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

30 Sep, 2006

1 commit


03 Jul, 2006

1 commit


22 Mar, 2006

3 commits

  • Modules: MIPS AU1x00 driver

    AMD Au1x00 ALSA driver erroneously calls request_region() for AC'97
    controller registers -- the controller is actually memory mapped at
    addresses 0x10000000 thru 0x100FFFFF.

    Signed-off-by: Sergei Shtylyov
    Signed-off-by: Takashi Iwai

    Sergei Shtylyov
     
  • Modules: MIPS AU1x00 driver

    AMD Au1x00 ALSA driver causes kernel oops in au1000_init() by trying
    to set DMA channel to -1 in yet unallocated audio streams. Here's the
    patch that staightens up DMA init/cleanup code.

    Signed-off-by: Sergei Shtylyov
    Signed-off-by: Takashi Iwai

    Sergei Shtylyov
     
  • Modules: MIPS AU1x00 driver

    AMD Au1x00 ALSA driver doesn't build after the recent code cleanup:

    sound/mips/au1x00.c: In function 'au1000_setup_dma_link':
    sound/mips/au1x00.c:173: error: 'pointer' undeclared (first use in this function)
    sound/mips/au1x00.c:173: error: (Each undeclared identifier is reported only once
    sound/mips/au1x00.c:173: error: for each function it appears in.)
    sound/mips/au1x00.c: In function 'snd_au1000_hw_params':
    sound/mips/au1x00.c:339: warning: implicit declaration of function 'snd_mask_min'

    Signed-off-by: Takashi Iwai

    Sergei Shtylylov
     

03 Jan, 2006

3 commits


04 Nov, 2005

3 commits


12 Sep, 2005

1 commit

  • ARM,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,MIPS
    MIPS AU1x00 driver,PPC,PPC PowerMac driver,SPARC,SPARC AMD7930 driver
    SPARC cs4231 driver,SPARC DBRI driver
    - Added snd_card_set_generic_dev() call.
    - Added SND_GENERIC_DRIVER to Kconfig.
    - Clean up the error path in probe if necessary.

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     

17 Apr, 2005

1 commit

  • Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds